Merge branch 'virtex-for-2.6.25' of git://git.secretlab.ca/git/linux-2.6-virtex into for-2.6.25

14 files changed, 2031 insertions, 43 deletions

diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index e9690de93709..7b4e8a70882c 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -2578,6 +2578,20 @@ platforms are moved over to use the flattened-device-tree model.
       Requred properties:
        - current-speed : Baud rate of uartlite
 
+      v) Xilinx hwicap
+
+                Xilinx hwicap devices provide access to the configuration logic
+                of the FPGA through the Internal Configuration Access Port
+                (ICAP).  The ICAP enables partial reconfiguration of the FPGA,
+                readback of the configuration information, and some control over
+                'warm boots' of the FPGA fabric.
+
+                Required properties:
+                - xlnx,family : The family of the FPGA, necessary since the
+                      capabilities of the underlying ICAP hardware
+                      differ between different families.  May be
+                      'virtex2p', 'virtex4', or 'virtex5'.
+
     p) Freescale Synchronous Serial Interface
 
        The SSI is a serial device that communicates with audio codecs.  It can
diff --git a/arch/powerpc/platforms/40x/virtex.c b/arch/powerpc/platforms/40x/virtex.c
index 88b66444dfb2..0422590040db 100644
--- a/arch/powerpc/platforms/40x/virtex.c
+++ b/arch/powerpc/platforms/40x/virtex.c
@@ -37,7 +37,7 @@ static int __init virtex_probe(void)
 {
         unsigned long root = of_get_flat_dt_root();
 
-        if (!of_flat_dt_is_compatible(root, "xilinx,virtex"))
+        if (!of_flat_dt_is_compatible(root, "xlnx,virtex"))
                 return 0;
 
         return 1;
diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c
index 78ebfffc77e3..4a7a059ebaf7 100644
--- a/drivers/block/xsysace.c
+++ b/drivers/block/xsysace.c
@@ -1202,8 +1202,10 @@ static int __devexit ace_of_remove(struct of_device *op)
 }
 
 /* Match table for of_platform binding */
-static struct of_device_id __devinit ace_of_match[] = {
-        { .compatible = "xilinx,xsysace", },
+static struct of_device_id ace_of_match[] __devinitdata = {
+        { .compatible = "xlnx,opb-sysace-1.00.b", },
+        { .compatible = "xlnx,opb-sysace-1.00.c", },
+        { .compatible = "xlnx,xps-sysace-1.00.a", },
         {},
 };
 MODULE_DEVICE_TABLE(of, ace_of_match);
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 466629594776..be8371ac3086 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -841,6 +841,16 @@ config DTLK
           To compile this driver as a module, choose M here: the
           module will be called dtlk.
 
+config XILINX_HWICAP
+        tristate "Xilinx HWICAP Support"
+        depends on XILINX_VIRTEX
+        help
+          This option enables support for Xilinx Internal Configuration
+          Access Port (ICAP) driver.  The ICAP is used on Xilinx Virtex
+          FPGA platforms to partially reconfigure the FPGA at runtime.
+
+          If unsure, say N.
+
 config R3964
         tristate "Siemens R3964 line discipline"
         ---help---
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index 96fc01eddefe..686fabbd85cd 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -77,6 +77,7 @@ obj-$(CONFIG_EFI_RTC)		+= efirtc.o
 obj-$(CONFIG_SGI_DS1286)        += ds1286.o
 obj-$(CONFIG_SGI_IP27_RTC)      += ip27-rtc.o
 obj-$(CONFIG_DS1302)            += ds1302.o
+obj-$(CONFIG_XILINX_HWICAP)     += xilinx_hwicap/
 ifeq ($(CONFIG_GENERIC_NVRAM),y)
   obj-$(CONFIG_NVRAM)   += generic_nvram.o
 else
diff --git a/drivers/char/xilinx_hwicap/Makefile b/drivers/char/xilinx_hwicap/Makefile
new file mode 100644
index 000000000000..5491cbc42f43
--- /dev/null
+++ b/drivers/char/xilinx_hwicap/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for the Xilinx OPB hwicap driver
+#
+
+obj-$(CONFIG_XILINX_HWICAP) += xilinx_hwicap_m.o 
+ 
+xilinx_hwicap_m-y := xilinx_hwicap.o fifo_icap.o buffer_icap.o
diff --git a/drivers/char/xilinx_hwicap/buffer_icap.c b/drivers/char/xilinx_hwicap/buffer_icap.c
new file mode 100644
index 000000000000..dfea2bde162b
--- /dev/null
+++ b/drivers/char/xilinx_hwicap/buffer_icap.c
@@ -0,0 +1,380 @@
+/*****************************************************************************
+ *
+ *     Author: Xilinx, Inc.
+ *
+ *     This program is free software; you can redistribute it and/or modify it
+ *     under the terms of the GNU General Public License as published by the
+ *     Free Software Foundation; either version 2 of the License, or (at your
+ *     option) any later version.
+ *
+ *     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS"
+ *     AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND
+ *     SOLUTIONS FOR XILINX DEVICES.  BY PROVIDING THIS DESIGN, CODE,
+ *     OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE,
+ *     APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION
+ *     THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT,
+ *     AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE
+ *     FOR YOUR IMPLEMENTATION.  XILINX EXPRESSLY DISCLAIMS ANY
+ *     WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE
+ *     IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR
+ *     REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF
+ *     INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ *     FOR A PARTICULAR PURPOSE.
+ *
+ *     Xilinx products are not intended for use in life support appliances,
+ *     devices, or systems. Use in such applications is expressly prohibited.
+ *
+ *     (c) Copyright 2003-2008 Xilinx Inc.
+ *     All rights reserved.
+ *
+ *     You should have received a copy of the GNU General Public License along
+ *     with this program; if not, write to the Free Software Foundation, Inc.,
+ *     675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *****************************************************************************/
+
+#include "buffer_icap.h"
+
+/* Indicates how many bytes will fit in a buffer. (1 BRAM) */
+#define XHI_MAX_BUFFER_BYTES        2048
+#define XHI_MAX_BUFFER_INTS         (XHI_MAX_BUFFER_BYTES >> 2)
+
+/* File access and error constants */
+#define XHI_DEVICE_READ_ERROR       -1
+#define XHI_DEVICE_WRITE_ERROR      -2
+#define XHI_BUFFER_OVERFLOW_ERROR   -3
+
+#define XHI_DEVICE_READ             0x1
+#define XHI_DEVICE_WRITE            0x0
+
+/* Constants for checking transfer status */
+#define XHI_CYCLE_DONE              0
+#define XHI_CYCLE_EXECUTING         1
+
+/* buffer_icap register offsets */
+
+/* Size of transfer, read & write */
+#define XHI_SIZE_REG_OFFSET        0x800L
+/* offset into bram, read & write */
+#define XHI_BRAM_OFFSET_REG_OFFSET 0x804L
+/* Read not Configure, direction of transfer.  Write only */
+#define XHI_RNC_REG_OFFSET         0x808L
+/* Indicates transfer complete. Read only */
+#define XHI_STATUS_REG_OFFSET      0x80CL
+
+/* Constants for setting the RNC register */
+#define XHI_CONFIGURE              0x0UL
+#define XHI_READBACK               0x1UL
+
+/* Constants for the Done register */
+#define XHI_NOT_FINISHED           0x0UL
+#define XHI_FINISHED               0x1UL
+
+#define XHI_BUFFER_START 0
+
+/**
+ * buffer_icap_get_status: Get the contents of the status register.
+ * @parameter base_address: is the base address of the device
+ *
+ * The status register contains the ICAP status and the done bit.
+ *
+ * D8 - cfgerr
+ * D7 - dalign
+ * D6 - rip
+ * D5 - in_abort_l
+ * D4 - Always 1
+ * D3 - Always 1
+ * D2 - Always 1
+ * D1 - Always 1
+ * D0 - Done bit
+ **/
+static inline u32 buffer_icap_get_status(void __iomem *base_address)
+{
+        return in_be32(base_address + XHI_STATUS_REG_OFFSET);
+}
+
+/**
+ * buffer_icap_get_bram: Reads data from the storage buffer bram.
+ * @parameter base_address: contains the base address of the component.
+ * @parameter offset: The word offset from which the data should be read.
+ *
+ * A bram is used as a configuration memory cache.  One frame of data can
+ * be stored in this "storage buffer".
+ **/
+static inline u32 buffer_icap_get_bram(void __iomem *base_address,
+                u32 offset)
+{
+        return in_be32(base_address + (offset << 2));
+}
+
+/**
+ * buffer_icap_busy: Return true if the icap device is busy
+ * @parameter base_address: is the base address of the device
+ *
+ * The queries the low order bit of the status register, which
+ * indicates whether the current configuration or readback operation
+ * has completed.
+ **/
+static inline bool buffer_icap_busy(void __iomem *base_address)
+{
+        return (buffer_icap_get_status(base_address) & 1) == XHI_NOT_FINISHED;
+}
+
+/**
+ * buffer_icap_busy: Return true if the icap device is not busy
+ * @parameter base_address: is the base address of the device
+ *
+ * The queries the low order bit of the status register, which
+ * indicates whether the current configuration or readback operation
+ * has completed.
+ **/
+static inline bool buffer_icap_done(void __iomem *base_address)
+{
+        return (buffer_icap_get_status(base_address) & 1) == XHI_FINISHED;
+}
+
+/**
+ * buffer_icap_set_size: Set the size register.
+ * @parameter base_address: is the base address of the device
+ * @parameter data: The size in bytes.
+ *
+ * The size register holds the number of 8 bit bytes to transfer between
+ * bram and the icap (or icap to bram).
+ **/
+static inline void buffer_icap_set_size(void __iomem *base_address,
+                u32 data)
+{
+        out_be32(base_address + XHI_SIZE_REG_OFFSET, data);
+}
+
+/**
+ * buffer_icap_mSetoffsetReg: Set the bram offset register.
+ * @parameter base_address: contains the base address of the device.
+ * @parameter data: is the value to be written to the data register.
+ *
+ * The bram offset register holds the starting bram address to transfer
+ * data from during configuration or write data to during readback.
+ **/
+static inline void buffer_icap_set_offset(void __iomem *base_address,
+                u32 data)
+{
+        out_be32(base_address + XHI_BRAM_OFFSET_REG_OFFSET, data);
+}
+
+/**
+ * buffer_icap_set_rnc: Set the RNC (Readback not Configure) register.
+ * @parameter base_address: contains the base address of the device.
+ * @parameter data: is the value to be written to the data register.
+ *
+ * The RNC register determines the direction of the data transfer.  It
+ * controls whether a configuration or readback take place.  Writing to
+ * this register initiates the transfer.  A value of 1 initiates a
+ * readback while writing a value of 0 initiates a configuration.
+ **/
+static inline void buffer_icap_set_rnc(void __iomem *base_address,
+                u32 data)
+{
+        out_be32(base_address + XHI_RNC_REG_OFFSET, data);
+}
+
+/**
+ * buffer_icap_set_bram: Write data to the storage buffer bram.
+ * @parameter base_address: contains the base address of the component.
+ * @parameter offset: The word offset at which the data should be written.
+ * @parameter data: The value to be written to the bram offset.
+ *
+ * A bram is used as a configuration memory cache.  One frame of data can
+ * be stored in this "storage buffer".
+ **/
+static inline void buffer_icap_set_bram(void __iomem *base_address,
+                u32 offset, u32 data)
+{
+        out_be32(base_address + (offset << 2), data);
+}
+
+/**
+ * buffer_icap_device_read: Transfer bytes from ICAP to the storage buffer.
+ * @parameter drvdata: a pointer to the drvdata.
+ * @parameter offset: The storage buffer start address.
+ * @parameter count: The number of words (32 bit) to read from the
+ *           device (ICAP).
+ **/
+static int buffer_icap_device_read(struct hwicap_drvdata *drvdata,
+                u32 offset, u32 count)
+{
+
+        s32 retries = 0;
+        void __iomem *base_address = drvdata->base_address;
+
+        if (buffer_icap_busy(base_address))
+                return -EBUSY;
+
+        if ((offset + count) > XHI_MAX_BUFFER_INTS)
+                return -EINVAL;
+
+        /* setSize count*4 to get bytes. */
+        buffer_icap_set_size(base_address, (count << 2));
+        buffer_icap_set_offset(base_address, offset);
+        buffer_icap_set_rnc(base_address, XHI_READBACK);
+
+        while (buffer_icap_busy(base_address)) {
+                retries++;
+                if (retries > XHI_MAX_RETRIES)
+                        return -EBUSY;
+        }
+        return 0;
+
+};
+
+/**
+ * buffer_icap_device_write: Transfer bytes from ICAP to the storage buffer.
+ * @parameter drvdata: a pointer to the drvdata.
+ * @parameter offset: The storage buffer start address.
+ * @parameter count: The number of words (32 bit) to read from the
+ *           device (ICAP).
+ **/
+static int buffer_icap_device_write(struct hwicap_drvdata *drvdata,
+                u32 offset, u32 count)
+{
+
+        s32 retries = 0;
+        void __iomem *base_address = drvdata->base_address;
+
+        if (buffer_icap_busy(base_address))
+                return -EBUSY;
+
+        if ((offset + count) > XHI_MAX_BUFFER_INTS)
+                return -EINVAL;
+
+        /* setSize count*4 to get bytes. */
+        buffer_icap_set_size(base_address, count << 2);
+        buffer_icap_set_offset(base_address, offset);
+        buffer_icap_set_rnc(base_address, XHI_CONFIGURE);
+
+        while (buffer_icap_busy(base_address)) {
+                retries++;
+                if (retries > XHI_MAX_RETRIES)
+                        return -EBUSY;
+        }
+        return 0;
+
+};
+
+/**
+ * buffer_icap_reset: Reset the logic of the icap device.
+ * @parameter drvdata: a pointer to the drvdata.
+ *
+ * Writing to the status register resets the ICAP logic in an internal
+ * version of the core.  For the version of the core published in EDK,
+ * this is a noop.
+ **/
+void buffer_icap_reset(struct hwicap_drvdata *drvdata)
+{
+    out_be32(drvdata->base_address + XHI_STATUS_REG_OFFSET, 0xFEFE);
+}
+
+/**
+ * buffer_icap_set_configuration: Load a partial bitstream from system memory.
+ * @parameter drvdata: a pointer to the drvdata.
+ * @parameter data: Kernel address of the partial bitstream.
+ * @parameter size: the size of the partial bitstream in 32 bit words.
+ **/
+int buffer_icap_set_configuration(struct hwicap_drvdata *drvdata, u32 *data,
+                             u32 size)
+{
+        int status;
+        s32 buffer_count = 0;
+        s32 num_writes = 0;
+        bool dirty = 0;
+        u32 i;
+        void __iomem *base_address = drvdata->base_address;
+
+        /* Loop through all the data */
+        for (i = 0, buffer_count = 0; i < size; i++) {
+
+                /* Copy data to bram */
+                buffer_icap_set_bram(base_address, buffer_count, data[i]);
+                dirty = 1;
+
+                if (buffer_count < XHI_MAX_BUFFER_INTS - 1) {
+                        buffer_count++;
+                        continue;
+                }
+
+                /* Write data to ICAP */
+                status = buffer_icap_device_write(
+                                drvdata,
+                                XHI_BUFFER_START,
+                                XHI_MAX_BUFFER_INTS);
+                if (status != 0) {
+                        /* abort. */
+                        buffer_icap_reset(drvdata);
+                        return status;
+                }
+
+                buffer_count = 0;
+                num_writes++;
+                dirty = 0;
+        }
+
+        /* Write unwritten data to ICAP */
+        if (dirty) {
+                /* Write data to ICAP */
+                status = buffer_icap_device_write(drvdata, XHI_BUFFER_START,
+                                             buffer_count);
+                if (status != 0) {
+                        /* abort. */
+                        buffer_icap_reset(drvdata);
+                }
+                return status;
+        }
+
+        return 0;
+};
+
+/**
+ * buffer_icap_get_configuration: Read configuration data from the device.
+ * @parameter drvdata: a pointer to the drvdata.
+ * @parameter data: Address of the data representing the partial bitstream
+ * @parameter size: the size of the partial bitstream in 32 bit words.
+ **/
+int buffer_icap_get_configuration(struct hwicap_drvdata *drvdata, u32 *data,
+                             u32 size)
+{
+        int status;
+        s32 buffer_count = 0;
+        s32 read_count = 0;
+        u32 i;
+        void __iomem *base_address = drvdata->base_address;
+
+        /* Loop through all the data */
+        for (i = 0, buffer_count = XHI_MAX_BUFFER_INTS; i < size; i++) {
+                if (buffer_count == XHI_MAX_BUFFER_INTS) {
+                        u32 words_remaining = size - i;
+                        u32 words_to_read =
+                                words_remaining <
+                                XHI_MAX_BUFFER_INTS ? words_remaining :
+                                XHI_MAX_BUFFER_INTS;
+
+                        /* Read data from ICAP */
+                        status = buffer_icap_device_read(
+                                        drvdata,
+                                        XHI_BUFFER_START,
+                                        words_to_read);
+                        if (status != 0) {
+                                /* abort. */
+                                buffer_icap_reset(drvdata);
+                                return status;
+                        }
+
+                        buffer_count = 0;
+                        read_count++;
+                }
+
+                /* Copy data from bram */
+                data[i] = buffer_icap_get_bram(base_address, buffer_count);
+                buffer_count++;
+        }
+
+        return 0;
+};
diff --git a/drivers/char/xilinx_hwicap/buffer_icap.h b/drivers/char/xilinx_hwicap/buffer_icap.h
new file mode 100644
index 000000000000..03184959fa00
--- /dev/null
+++ b/drivers/char/xilinx_hwicap/buffer_icap.h
@@ -0,0 +1,57 @@
+/*****************************************************************************
+ *
+ *     Author: Xilinx, Inc.
+ *
+ *     This program is free software; you can redistribute it and/or modify it
+ *     under the terms of the GNU General Public License as published by the
+ *     Free Software Foundation; either version 2 of the License, or (at your
+ *     option) any later version.
+ *
+ *     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS"
+ *     AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND
+ *     SOLUTIONS FOR XILINX DEVICES.  BY PROVIDING THIS DESIGN, CODE,
+ *     OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE,
+ *     APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION
+ *     THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT,
+ *     AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE
+ *     FOR YOUR IMPLEMENTATION.  XILINX EXPRESSLY DISCLAIMS ANY
+ *     WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE
+ *     IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR
+ *     REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF
+ *     INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ *     FOR A PARTICULAR PURPOSE.
+ *
+ *     Xilinx products are not intended for use in life support appliances,
+ *     devices, or systems. Use in such applications is expressly prohibited.
+ *
+ *     (c) Copyright 2003-2008 Xilinx Inc.
+ *     All rights reserved.
+ *
+ *     You should have received a copy of the GNU General Public License along
+ *     with this program; if not, write to the Free Software Foundation, Inc.,
+ *     675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *****************************************************************************/
+
+#ifndef XILINX_BUFFER_ICAP_H_   /* prevent circular inclusions */
+#define XILINX_BUFFER_ICAP_H_   /* by using protection macros */
+
+#include <linux/types.h>
+#include <linux/cdev.h>
+#include <linux/version.h>
+#include <linux/platform_device.h>
+
+#include <asm/io.h>
+#include "xilinx_hwicap.h"
+
+void buffer_icap_reset(struct hwicap_drvdata *drvdata);
+
+/* Loads a partial bitstream from system memory. */
+int buffer_icap_set_configuration(struct hwicap_drvdata *drvdata, u32 *data,
+                             u32 Size);
+
+/* Loads a partial bitstream from system memory. */
+int buffer_icap_get_configuration(struct hwicap_drvdata *drvdata, u32 *data,
+                             u32 Size);
+
+#endif
diff --git a/drivers/char/xilinx_hwicap/fifo_icap.c b/drivers/char/xilinx_hwicap/fifo_icap.c
new file mode 100644
index 000000000000..0988314694a6
--- /dev/null
+++ b/drivers/char/xilinx_hwicap/fifo_icap.c
@@ -0,0 +1,381 @@
+/*****************************************************************************
+ *
+ *     Author: Xilinx, Inc.
+ *
+ *     This program is free software; you can redistribute it and/or modify it
+ *     under the terms of the GNU General Public License as published by the
+ *     Free Software Foundation; either version 2 of the License, or (at your
+ *     option) any later version.
+ *
+ *     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS"
+ *     AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND
+ *     SOLUTIONS FOR XILINX DEVICES.  BY PROVIDING THIS DESIGN, CODE,
+ *     OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE,
+ *     APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION
+ *     THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT,
+ *     AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE
+ *     FOR YOUR IMPLEMENTATION.  XILINX EXPRESSLY DISCLAIMS ANY
+ *     WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE
+ *     IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR
+ *     REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF
+ *     INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ *     FOR A PARTICULAR PURPOSE.
+ *
+ *     Xilinx products are not intended for use in life support appliances,
+ *     devices, or systems. Use in such applications is expressly prohibited.
+ *
+ *     (c) Copyright 2007-2008 Xilinx Inc.
+ *     All rights reserved.
+ *
+ *     You should have received a copy of the GNU General Public License along
+ *     with this program; if not, write to the Free Software Foundation, Inc.,
+ *     675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *****************************************************************************/
+
+#include "fifo_icap.h"
+
+/* Register offsets for the XHwIcap device. */
+#define XHI_GIER_OFFSET 0x1C  /* Device Global Interrupt Enable Reg */
+#define XHI_IPISR_OFFSET 0x20  /* Interrupt Status Register */
+#define XHI_IPIER_OFFSET 0x28  /* Interrupt Enable Register */
+#define XHI_WF_OFFSET 0x100 /* Write FIFO */
+#define XHI_RF_OFFSET 0x104 /* Read FIFO */
+#define XHI_SZ_OFFSET 0x108 /* Size Register */
+#define XHI_CR_OFFSET 0x10C /* Control Register */
+#define XHI_SR_OFFSET 0x110 /* Status Register */
+#define XHI_WFV_OFFSET 0x114 /* Write FIFO Vacancy Register */
+#define XHI_RFO_OFFSET 0x118 /* Read FIFO Occupancy Register */
+
+/* Device Global Interrupt Enable Register (GIER) bit definitions */
+
+#define XHI_GIER_GIE_MASK 0x80000000 /* Global Interrupt enable Mask */
+
+/**
+ * HwIcap Device Interrupt Status/Enable Registers
+ *
+ * Interrupt Status Register (IPISR) : This register holds the
+ * interrupt status flags for the device. These bits are toggle on
+ * write.
+ *
+ * Interrupt Enable Register (IPIER) : This register is used to enable
+ * interrupt sources for the device.
+ * Writing a '1' to a bit enables the corresponding interrupt.
+ * Writing a '0' to a bit disables the corresponding interrupt.
+ *
+ * IPISR/IPIER registers have the same bit definitions and are only defined
+ * once.
+ */
+#define XHI_IPIXR_RFULL_MASK 0x00000008 /* Read FIFO Full */
+#define XHI_IPIXR_WEMPTY_MASK 0x00000004 /* Write FIFO Empty */
+#define XHI_IPIXR_RDP_MASK 0x00000002 /* Read FIFO half full */
+#define XHI_IPIXR_WRP_MASK 0x00000001 /* Write FIFO half full */
+#define XHI_IPIXR_ALL_MASK 0x0000000F /* Mask of all interrupts */
+
+/* Control Register (CR) */
+#define XHI_CR_SW_RESET_MASK 0x00000008 /* SW Reset Mask */
+#define XHI_CR_FIFO_CLR_MASK 0x00000004 /* FIFO Clear Mask */
+#define XHI_CR_READ_MASK 0x00000002 /* Read from ICAP to FIFO */
+#define XHI_CR_WRITE_MASK 0x00000001 /* Write from FIFO to ICAP */
+
+/* Status Register (SR) */
+#define XHI_SR_CFGERR_N_MASK 0x00000100 /* Config Error Mask */
+#define XHI_SR_DALIGN_MASK 0x00000080 /* Data Alignment Mask */
+#define XHI_SR_RIP_MASK 0x00000040 /* Read back Mask */
+#define XHI_SR_IN_ABORT_N_MASK 0x00000020 /* Select Map Abort Mask */
+#define XHI_SR_DONE_MASK 0x00000001 /* Done bit Mask  */
+
+
+#define XHI_WFO_MAX_VACANCY 1024 /* Max Write FIFO Vacancy, in words */
+#define XHI_RFO_MAX_OCCUPANCY 256 /* Max Read FIFO Occupancy, in words */
+/* The maximum amount we can request from fifo_icap_get_configuration
+   at once, in bytes. */
+#define XHI_MAX_READ_TRANSACTION_WORDS 0xFFF
+
+
+/**
+ * fifo_icap_fifo_write: Write data to the write FIFO.
+ * @parameter drvdata: a pointer to the drvdata.
+ * @parameter data: the 32-bit value to be written to the FIFO.
+ *
+ * This function will silently fail if the fifo is full.
+ **/
+static inline void fifo_icap_fifo_write(struct hwicap_drvdata *drvdata,
+                u32 data)
+{
+        dev_dbg(drvdata->dev, "fifo_write: %x\n", data);
+        out_be32(drvdata->base_address + XHI_WF_OFFSET, data);
+}
+
+/**
+ * fifo_icap_fifo_read: Read data from the Read FIFO.
+ * @parameter drvdata: a pointer to the drvdata.
+ *
+ * This function will silently fail if the fifo is empty.
+ **/
+static inline u32 fifo_icap_fifo_read(struct hwicap_drvdata *drvdata)
+{
+        u32 data = in_be32(drvdata->base_address + XHI_RF_OFFSET);
+        dev_dbg(drvdata->dev, "fifo_read: %x\n", data);
+        return data;
+}
+
+/**
+ * fifo_icap_set_read_size: Set the the size register.
+ * @parameter drvdata: a pointer to the drvdata.
+ * @parameter data: the size of the following read transaction, in words.
+ **/
+static inline void fifo_icap_set_read_size(struct hwicap_drvdata *drvdata,
+                u32 data)
+{
+        out_be32(drvdata->base_address + XHI_SZ_OFFSET, data);
+}
+
+/**
+ * fifo_icap_start_config: Initiate a configuration (write) to the device.
+ * @parameter drvdata: a pointer to the drvdata.
+ **/
+static inline void fifo_icap_start_config(struct hwicap_drvdata *drvdata)
+{
+        out_be32(drvdata->base_address + XHI_CR_OFFSET, XHI_CR_WRITE_MASK);
+        dev_dbg(drvdata->dev, "configuration started\n");
+}
+
+/**
+ * fifo_icap_start_readback: Initiate a readback from the device.
+ * @parameter drvdata: a pointer to the drvdata.
+ **/
+static inline void fifo_icap_start_readback(struct hwicap_drvdata *drvdata)
+{
+        out_be32(drvdata->base_address + XHI_CR_OFFSET, XHI_CR_READ_MASK);
+        dev_dbg(drvdata->dev, "readback started\n");
+}
+
+/**
+ * fifo_icap_busy: Return true if the ICAP is still processing a transaction.
+ * @parameter drvdata: a pointer to the drvdata.
+ **/
+static inline u32 fifo_icap_busy(struct hwicap_drvdata *drvdata)
+{
+        u32 status = in_be32(drvdata->base_address + XHI_SR_OFFSET);
+        dev_dbg(drvdata->dev, "Getting status = %x\n", status);
+        return (status & XHI_SR_DONE_MASK) ? 0 : 1;
+}
+
+/**
+ * fifo_icap_write_fifo_vacancy: Query the write fifo available space.
+ * @parameter drvdata: a pointer to the drvdata.
+ *
+ * Return the number of words that can be safely pushed into the write fifo.
+ **/
+static inline u32 fifo_icap_write_fifo_vacancy(
+                struct hwicap_drvdata *drvdata)
+{
+        return in_be32(drvdata->base_address + XHI_WFV_OFFSET);
+}
+
+/**
+ * fifo_icap_read_fifo_occupancy: Query the read fifo available data.
+ * @parameter drvdata: a pointer to the drvdata.
+ *
+ * Return the number of words that can be safely read from the read fifo.
+ **/
+static inline u32 fifo_icap_read_fifo_occupancy(
+                struct hwicap_drvdata *drvdata)
+{
+        return in_be32(drvdata->base_address + XHI_RFO_OFFSET);
+}
+
+/**
+ * fifo_icap_set_configuration: Send configuration data to the ICAP.
+ * @parameter drvdata: a pointer to the drvdata.
+ * @parameter frame_buffer: a pointer to the data to be written to the
+ *              ICAP device.
+ * @parameter num_words: the number of words (32 bit) to write to the ICAP
+ *              device.
+
+ * This function writes the given user data to the Write FIFO in
+ * polled mode and starts the transfer of the data to
+ * the ICAP device.
+ **/
+int fifo_icap_set_configuration(struct hwicap_drvdata *drvdata,
+                u32 *frame_buffer, u32 num_words)
+{
+
+        u32 write_fifo_vacancy = 0;
+        u32 retries = 0;
+        u32 remaining_words;
+
+        dev_dbg(drvdata->dev, "fifo_set_configuration\n");
+
+        /*
+         * Check if the ICAP device is Busy with the last Read/Write
+         */
+        if (fifo_icap_busy(drvdata))
+                return -EBUSY;
+
+        /*
+         * Set up the buffer pointer and the words to be transferred.
+         */
+        remaining_words = num_words;
+
+        while (remaining_words > 0) {
+                /*
+                 * Wait until we have some data in the fifo.
+                 */
+                while (write_fifo_vacancy == 0) {
+                        write_fifo_vacancy =
+                                fifo_icap_write_fifo_vacancy(drvdata);
+                        retries++;
+                        if (retries > XHI_MAX_RETRIES)
+                                return -EIO;
+                }
+
+                /*
+                 * Write data into the Write FIFO.
+                 */
+                while ((write_fifo_vacancy != 0) &&
+                                (remaining_words > 0)) {
+                        fifo_icap_fifo_write(drvdata, *frame_buffer);
+
+                        remaining_words--;
+                        write_fifo_vacancy--;
+                        frame_buffer++;
+                }
+                /* Start pushing whatever is in the FIFO into the ICAP. */
+                fifo_icap_start_config(drvdata);
+        }
+
+        /* Wait until the write has finished. */
+        while (fifo_icap_busy(drvdata)) {
+                retries++;
+                if (retries > XHI_MAX_RETRIES)
+                        break;
+        }
+
+        dev_dbg(drvdata->dev, "done fifo_set_configuration\n");
+
+        /*
+         * If the requested number of words have not been read from
+         * the device then indicate failure.
+         */
+        if (remaining_words != 0)
+                return -EIO;
+
+        return 0;
+}
+
+/**
+ * fifo_icap_get_configuration: Read configuration data from the device.
+ * @parameter drvdata: a pointer to the drvdata.
+ * @parameter data: Address of the data representing the partial bitstream
+ * @parameter size: the size of the partial bitstream in 32 bit words.
+ *
+ * This function reads the specified number of words from the ICAP device in
+ * the polled mode.
+ */
+int fifo_icap_get_configuration(struct hwicap_drvdata *drvdata,
+                u32 *frame_buffer, u32 num_words)
+{
+
+        u32 read_fifo_occupancy = 0;
+        u32 retries = 0;
+        u32 *data = frame_buffer;
+        u32 remaining_words;
+        u32 words_to_read;
+
+        dev_dbg(drvdata->dev, "fifo_get_configuration\n");
+
+        /*
+         * Check if the ICAP device is Busy with the last Write/Read
+         */
+        if (fifo_icap_busy(drvdata))
+                return -EBUSY;
+
+        remaining_words = num_words;
+
+        while (remaining_words > 0) {
+                words_to_read = remaining_words;
+                /* The hardware has a limit on the number of words
+                   that can be read at one time.  */
+                if (words_to_read > XHI_MAX_READ_TRANSACTION_WORDS)
+                        words_to_read = XHI_MAX_READ_TRANSACTION_WORDS;
+
+                remaining_words -= words_to_read;
+
+                fifo_icap_set_read_size(drvdata, words_to_read);
+                fifo_icap_start_readback(drvdata);
+
+                while (words_to_read > 0) {
+                        /* Wait until we have some data in the fifo. */
+                        while (read_fifo_occupancy == 0) {
+                                read_fifo_occupancy =
+                                        fifo_icap_read_fifo_occupancy(drvdata);
+                                retries++;
+                                if (retries > XHI_MAX_RETRIES)
+                                        return -EIO;
+                        }
+
+                        if (read_fifo_occupancy > words_to_read)
+                                read_fifo_occupancy = words_to_read;
+
+                        words_to_read -= read_fifo_occupancy;
+
+                        /* Read the data from the Read FIFO. */
+                        while (read_fifo_occupancy != 0) {
+                                *data++ = fifo_icap_fifo_read(drvdata);
+                                read_fifo_occupancy--;
+                        }
+                }
+        }
+
+        dev_dbg(drvdata->dev, "done fifo_get_configuration\n");
+
+        return 0;
+}
+
+/**
+ * buffer_icap_reset: Reset the logic of the icap device.
+ * @parameter drvdata: a pointer to the drvdata.
+ *
+ * This function forces the software reset of the complete HWICAP device.
+ * All the registers will return to the default value and the FIFO is also
+ * flushed as a part of this software reset.
+ */
+void fifo_icap_reset(struct hwicap_drvdata *drvdata)
+{
+        u32 reg_data;
+        /*
+         * Reset the device by setting/clearing the RESET bit in the
+         * Control Register.
+         */
+        reg_data = in_be32(drvdata->base_address + XHI_CR_OFFSET);
+
+        out_be32(drvdata->base_address + XHI_CR_OFFSET,
+                                reg_data | XHI_CR_SW_RESET_MASK);
+
+        out_be32(drvdata->base_address + XHI_CR_OFFSET,
+                                reg_data & (~XHI_CR_SW_RESET_MASK));
+
+}
+
+/**
+ * fifo_icap_flush_fifo: This function flushes the FIFOs in the device.
+ * @parameter drvdata: a pointer to the drvdata.
+ */
+void fifo_icap_flush_fifo(struct hwicap_drvdata *drvdata)
+{
+        u32 reg_data;
+        /*
+         * Flush the FIFO by setting/clearing the FIFO Clear bit in the
+         * Control Register.
+         */
+        reg_data = in_be32(drvdata->base_address + XHI_CR_OFFSET);
+
+        out_be32(drvdata->base_address + XHI_CR_OFFSET,
+                                reg_data | XHI_CR_FIFO_CLR_MASK);
+
+        out_be32(drvdata->base_address + XHI_CR_OFFSET,
+                                reg_data & (~XHI_CR_FIFO_CLR_MASK));
+}
+
diff --git a/drivers/char/xilinx_hwicap/fifo_icap.h b/drivers/char/xilinx_hwicap/fifo_icap.h
new file mode 100644
index 000000000000..4d3068dd0405
--- /dev/null
+++ b/drivers/char/xilinx_hwicap/fifo_icap.h
@@ -0,0 +1,62 @@
+/*****************************************************************************
+ *
+ *     Author: Xilinx, Inc.
+ *
+ *     This program is free software; you can redistribute it and/or modify it
+ *     under the terms of the GNU General Public License as published by the
+ *     Free Software Foundation; either version 2 of the License, or (at your
+ *     option) any later version.
+ *
+ *     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS"
+ *     AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND
+ *     SOLUTIONS FOR XILINX DEVICES.  BY PROVIDING THIS DESIGN, CODE,
+ *     OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE,
+ *     APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION
+ *     THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT,
+ *     AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE
+ *     FOR YOUR IMPLEMENTATION.  XILINX EXPRESSLY DISCLAIMS ANY
+ *     WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE
+ *     IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR
+ *     REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF
+ *     INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ *     FOR A PARTICULAR PURPOSE.
+ *
+ *     Xilinx products are not intended for use in life support appliances,
+ *     devices, or systems. Use in such applications is expressly prohibited.
+ *
+ *     (c) Copyright 2007-2008 Xilinx Inc.
+ *     All rights reserved.
+ *
+ *     You should have received a copy of the GNU General Public License along
+ *     with this program; if not, write to the Free Software Foundation, Inc.,
+ *     675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *****************************************************************************/
+
+#ifndef XILINX_FIFO_ICAP_H_     /* prevent circular inclusions */
+#define XILINX_FIFO_ICAP_H_     /* by using protection macros */
+
+#include <linux/types.h>
+#include <linux/cdev.h>
+#include <linux/version.h>
+#include <linux/platform_device.h>
+
+#include <asm/io.h>
+#include "xilinx_hwicap.h"
+
+/* Reads integers from the device into the storage buffer. */
+int fifo_icap_get_configuration(
+                struct hwicap_drvdata *drvdata,
+                u32 *FrameBuffer,
+                u32 NumWords);
+
+/* Writes integers to the device from the storage buffer. */
+int fifo_icap_set_configuration(
+                struct hwicap_drvdata *drvdata,
+                u32 *FrameBuffer,
+                u32 NumWords);
+
+void fifo_icap_reset(struct hwicap_drvdata *drvdata);
+void fifo_icap_flush_fifo(struct hwicap_drvdata *drvdata);
+
+#endif
diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
new file mode 100644
index 000000000000..24f6aef0fd3c
--- /dev/null
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
@@ -0,0 +1,904 @@
+/*****************************************************************************
+ *
+ *     Author: Xilinx, Inc.
+ *
+ *     This program is free software; you can redistribute it and/or modify it
+ *     under the terms of the GNU General Public License as published by the
+ *     Free Software Foundation; either version 2 of the License, or (at your
+ *     option) any later version.
+ *
+ *     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS"
+ *     AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND
+ *     SOLUTIONS FOR XILINX DEVICES.  BY PROVIDING THIS DESIGN, CODE,
+ *     OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE,
+ *     APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION
+ *     THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT,
+ *     AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE
+ *     FOR YOUR IMPLEMENTATION.  XILINX EXPRESSLY DISCLAIMS ANY
+ *     WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE
+ *     IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR
+ *     REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF
+ *     INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ *     FOR A PARTICULAR PURPOSE.
+ *
+ *     Xilinx products are not intended for use in life support appliances,
+ *     devices, or systems. Use in such applications is expressly prohibited.
+ *
+ *     (c) Copyright 2002 Xilinx Inc., Systems Engineering Group
+ *     (c) Copyright 2004 Xilinx Inc., Systems Engineering Group
+ *     (c) Copyright 2007-2008 Xilinx Inc.
+ *     All rights reserved.
+ *
+ *     You should have received a copy of the GNU General Public License along
+ *     with this program; if not, write to the Free Software Foundation, Inc.,
+ *     675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *****************************************************************************/
+
+/*
+ * This is the code behind /dev/xilinx_icap -- it allows a user-space
+ * application to use the Xilinx ICAP subsystem.
+ *
+ * The following operations are possible:
+ *
+ * open         open the port and initialize for access.
+ * release      release port
+ * write        Write a bitstream to the configuration processor.
+ * read         Read a data stream from the configuration processor.
+ *
+ * After being opened, the port is initialized and accessed to avoid a
+ * corrupted first read which may occur with some hardware.  The port
+ * is left in a desynched state, requiring that a synch sequence be
+ * transmitted before any valid configuration data.  A user will have
+ * exclusive access to the device while it remains open, and the state
+ * of the ICAP cannot be guaranteed after the device is closed.  Note
+ * that a complete reset of the core and the state of the ICAP cannot
+ * be performed on many versions of the cores, hence users of this
+ * device should avoid making inconsistent accesses to the device.  In
+ * particular, accessing the read interface, without first generating
+ * a write containing a readback packet can leave the ICAP in an
+ * inaccessible state.
+ *
+ * Note that in order to use the read interface, it is first necessary
+ * to write a request packet to the write interface.  i.e., it is not
+ * possible to simply readback the bitstream (or any configuration
+ * bits) from a device without specifically requesting them first.
+ * The code to craft such packets is intended to be part of the
+ * user-space application code that uses this device.  The simplest
+ * way to use this interface is simply:
+ *
+ * cp foo.bit /dev/xilinx_icap
+ *
+ * Note that unless foo.bit is an appropriately constructed partial
+ * bitstream, this has a high likelyhood of overwriting the design
+ * currently programmed in the FPGA.
+ */
+
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/fcntl.h>
+#include <linux/init.h>
+#include <linux/poll.h>
+#include <linux/proc_fs.h>
+#include <asm/semaphore.h>
+#include <linux/sysctl.h>
+#include <linux/version.h>
+#include <linux/fs.h>
+#include <linux/cdev.h>
+#include <linux/platform_device.h>
+
+#include <asm/io.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+
+#ifdef CONFIG_OF
+/* For open firmware. */
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#endif
+
+#include "xilinx_hwicap.h"
+#include "buffer_icap.h"
+#include "fifo_icap.h"
+
+#define DRIVER_NAME "xilinx_icap"
+
+#define HWICAP_REGS   (0x10000)
+
+/* dynamically allocate device number */
+static int xhwicap_major;
+static int xhwicap_minor;
+#define HWICAP_DEVICES 1
+
+module_param(xhwicap_major, int, S_IRUGO);
+module_param(xhwicap_minor, int, S_IRUGO);
+
+/* An array, which is set to true when the device is registered. */
+static bool probed_devices[HWICAP_DEVICES];
+
+static struct class *icap_class;
+
+#define UNIMPLEMENTED 0xFFFF
+
+static const struct config_registers v2_config_registers = {
+        .CRC = 0,
+        .FAR = 1,
+        .FDRI = 2,
+        .FDRO = 3,
+        .CMD = 4,
+        .CTL = 5,
+        .MASK = 6,
+        .STAT = 7,
+        .LOUT = 8,
+        .COR = 9,
+        .MFWR = 10,
+        .FLR = 11,
+        .KEY = 12,
+        .CBC = 13,
+        .IDCODE = 14,
+        .AXSS = UNIMPLEMENTED,
+        .C0R_1 = UNIMPLEMENTED,
+        .CSOB = UNIMPLEMENTED,
+        .WBSTAR = UNIMPLEMENTED,
+        .TIMER = UNIMPLEMENTED,
+        .BOOTSTS = UNIMPLEMENTED,
+        .CTL_1 = UNIMPLEMENTED,
+};
+
+static const struct config_registers v4_config_registers = {
+        .CRC = 0,
+        .FAR = 1,
+        .FDRI = 2,
+        .FDRO = 3,
+        .CMD = 4,
+        .CTL = 5,
+        .MASK = 6,
+        .STAT = 7,
+        .LOUT = 8,
+        .COR = 9,
+        .MFWR = 10,
+        .FLR = UNIMPLEMENTED,
+        .KEY = UNIMPLEMENTED,
+        .CBC = 11,
+        .IDCODE = 12,
+        .AXSS = 13,
+        .C0R_1 = UNIMPLEMENTED,
+        .CSOB = UNIMPLEMENTED,
+        .WBSTAR = UNIMPLEMENTED,
+        .TIMER = UNIMPLEMENTED,
+        .BOOTSTS = UNIMPLEMENTED,
+        .CTL_1 = UNIMPLEMENTED,
+};
+static const struct config_registers v5_config_registers = {
+        .CRC = 0,
+        .FAR = 1,
+        .FDRI = 2,
+        .FDRO = 3,
+        .CMD = 4,
+        .CTL = 5,
+        .MASK = 6,
+        .STAT = 7,
+        .LOUT = 8,
+        .COR = 9,
+        .MFWR = 10,
+        .FLR = UNIMPLEMENTED,
+        .KEY = UNIMPLEMENTED,
+        .CBC = 11,
+        .IDCODE = 12,
+        .AXSS = 13,
+        .C0R_1 = 14,
+        .CSOB = 15,
+        .WBSTAR = 16,
+        .TIMER = 17,
+        .BOOTSTS = 18,
+        .CTL_1 = 19,
+};
+
+/**
+ * hwicap_command_desync: Send a DESYNC command to the ICAP port.
+ * @parameter drvdata: a pointer to the drvdata.
+ *
+ * This command desynchronizes the ICAP After this command, a
+ * bitstream containing a NULL packet, followed by a SYNCH packet is
+ * required before the ICAP will recognize commands.
+ */
+int hwicap_command_desync(struct hwicap_drvdata *drvdata)
+{
+        u32 buffer[4];
+        u32 index = 0;
+
+        /*
+         * Create the data to be written to the ICAP.
+         */
+        buffer[index++] = hwicap_type_1_write(drvdata->config_regs->CMD) | 1;
+        buffer[index++] = XHI_CMD_DESYNCH;
+        buffer[index++] = XHI_NOOP_PACKET;
+        buffer[index++] = XHI_NOOP_PACKET;
+
+        /*
+         * Write the data to the FIFO and intiate the transfer of data present
+         * in the FIFO to the ICAP device.
+         */
+        return drvdata->config->set_configuration(drvdata,
+                        &buffer[0], index);
+}
+
+/**
+ * hwicap_command_capture: Send a CAPTURE command to the ICAP port.
+ * @parameter drvdata: a pointer to the drvdata.
+ *
+ * This command captures all of the flip flop states so they will be
+ * available during readback.  One can use this command instead of
+ * enabling the CAPTURE block in the design.
+ */
+int hwicap_command_capture(struct hwicap_drvdata *drvdata)
+{
+        u32 buffer[7];
+        u32 index = 0;
+
+        /*
+         * Create the data to be written to the ICAP.
+         */
+        buffer[index++] = XHI_DUMMY_PACKET;
+        buffer[index++] = XHI_SYNC_PACKET;
+        buffer[index++] = XHI_NOOP_PACKET;
+        buffer[index++] = hwicap_type_1_write(drvdata->config_regs->CMD) | 1;
+        buffer[index++] = XHI_CMD_GCAPTURE;
+        buffer[index++] = XHI_DUMMY_PACKET;
+        buffer[index++] = XHI_DUMMY_PACKET;
+
+        /*
+         * Write the data to the FIFO and intiate the transfer of data
+         * present in the FIFO to the ICAP device.
+         */
+        return drvdata->config->set_configuration(drvdata,
+                        &buffer[0], index);
+
+}
+
+/**
+ * hwicap_get_configuration_register: Query a configuration register.
+ * @parameter drvdata: a pointer to the drvdata.
+ * @parameter reg: a constant which represents the configuration
+ *              register value to be returned.
+ *              Examples:  XHI_IDCODE, XHI_FLR.
+ * @parameter RegData: returns the value of the register.
+ *
+ * Sends a query packet to the ICAP and then receives the response.
+ * The icap is left in Synched state.
+ */
+int hwicap_get_configuration_register(struct hwicap_drvdata *drvdata,
+                u32 reg, u32 *RegData)
+{
+        int status;
+        u32 buffer[6];
+        u32 index = 0;
+
+        /*
+         * Create the data to be written to the ICAP.
+         */
+        buffer[index++] = XHI_DUMMY_PACKET;
+        buffer[index++] = XHI_SYNC_PACKET;
+        buffer[index++] = XHI_NOOP_PACKET;
+        buffer[index++] = hwicap_type_1_read(reg) | 1;
+        buffer[index++] = XHI_NOOP_PACKET;
+        buffer[index++] = XHI_NOOP_PACKET;
+
+        /*
+         * Write the data to the FIFO and intiate the transfer of data present
+         * in the FIFO to the ICAP device.
+         */
+        status = drvdata->config->set_configuration(drvdata,
+                        &buffer[0], index);
+        if (status)
+                return status;
+
+        /*
+         * Read the configuration register
+         */
+        status = drvdata->config->get_configuration(drvdata, RegData, 1);
+        if (status)
+                return status;
+
+        return 0;
+}
+
+int hwicap_initialize_hwicap(struct hwicap_drvdata *drvdata)
+{
+        int status;
+        u32 idcode;
+
+        dev_dbg(drvdata->dev, "initializing\n");
+
+        /* Abort any current transaction, to make sure we have the
+         * ICAP in a good state. */
+        dev_dbg(drvdata->dev, "Reset...\n");
+        drvdata->config->reset(drvdata);
+
+        dev_dbg(drvdata->dev, "Desync...\n");
+        status = hwicap_command_desync(drvdata);
+        if (status)
+                return status;
+
+        /* Attempt to read the IDCODE from ICAP.  This
+         * may not be returned correctly, due to the design of the
+         * hardware.
+         */
+        dev_dbg(drvdata->dev, "Reading IDCODE...\n");
+        status = hwicap_get_configuration_register(
+                        drvdata, drvdata->config_regs->IDCODE, &idcode);
+        dev_dbg(drvdata->dev, "IDCODE = %x\n", idcode);
+        if (status)
+                return status;
+
+        dev_dbg(drvdata->dev, "Desync...\n");
+        status = hwicap_command_desync(drvdata);
+        if (status)
+                return status;
+
+        return 0;
+}
+
+static ssize_t
+hwicap_read(struct file *file, char *buf, size_t count, loff_t *ppos)
+{
+        struct hwicap_drvdata *drvdata = file->private_data;
+        ssize_t bytes_to_read = 0;
+        u32 *kbuf;
+        u32 words;
+        u32 bytes_remaining;
+        int status;
+
+        if (down_interruptible(&drvdata->sem))
+                return -ERESTARTSYS;
+
+        if (drvdata->read_buffer_in_use) {
+                /* If there are leftover bytes in the buffer, just */
+                /* return them and don't try to read more from the */
+                /* ICAP device. */
+                bytes_to_read =
+                        (count < drvdata->read_buffer_in_use) ? count :
+                        drvdata->read_buffer_in_use;
+
+                /* Return the data currently in the read buffer. */
+                if (copy_to_user(buf, drvdata->read_buffer, bytes_to_read)) {
+                        status = -EFAULT;
+                        goto error;
+                }
+                drvdata->read_buffer_in_use -= bytes_to_read;
+                memcpy(drvdata->read_buffer + bytes_to_read,
+                                drvdata->read_buffer, 4 - bytes_to_read);
+        } else {
+                /* Get new data from the ICAP, and return was was requested. */
+                kbuf = (u32 *) get_zeroed_page(GFP_KERNEL);
+                if (!kbuf) {
+                        status = -ENOMEM;
+                        goto error;
+                }
+
+                /* The ICAP device is only able to read complete */
+                /* words.  If a number of bytes that do not correspond */
+                /* to complete words is requested, then we read enough */
+                /* words to get the required number of bytes, and then */
+                /* save the remaining bytes for the next read. */
+
+                /* Determine the number of words to read, rounding up */
+                /* if necessary. */
+                words = ((count + 3) >> 2);
+                bytes_to_read = words << 2;
+
+                if (bytes_to_read > PAGE_SIZE)
+                        bytes_to_read = PAGE_SIZE;
+
+                /* Ensure we only read a complete number of words. */
+                bytes_remaining = bytes_to_read & 3;
+                bytes_to_read &= ~3;
+                words = bytes_to_read >> 2;
+
+                status = drvdata->config->get_configuration(drvdata,
+                                kbuf, words);
+
+                /* If we didn't read correctly, then bail out. */
+                if (status) {
+                        free_page((unsigned long)kbuf);
+                        goto error;
+                }
+
+                /* If we fail to return the data to the user, then bail out. */
+                if (copy_to_user(buf, kbuf, bytes_to_read)) {
+                        free_page((unsigned long)kbuf);
+                        status = -EFAULT;
+                        goto error;
+                }
+                memcpy(kbuf, drvdata->read_buffer, bytes_remaining);
+                drvdata->read_buffer_in_use = bytes_remaining;
+                free_page((unsigned long)kbuf);
+        }
+        status = bytes_to_read;
+ error:
+        up(&drvdata->sem);
+        return status;
+}
+
+static ssize_t
+hwicap_write(struct file *file, const char *buf,
+                size_t count, loff_t *ppos)
+{
+        struct hwicap_drvdata *drvdata = file->private_data;
+        ssize_t written = 0;
+        ssize_t left = count;
+        u32 *kbuf;
+        ssize_t len;
+        ssize_t status;
+
+        if (down_interruptible(&drvdata->sem))
+                return -ERESTARTSYS;
+
+        left += drvdata->write_buffer_in_use;
+
+        /* Only write multiples of 4 bytes. */
+        if (left < 4) {
+                status = 0;
+                goto error;
+        }
+
+        kbuf = (u32 *) __get_free_page(GFP_KERNEL);
+        if (!kbuf) {
+                status = -ENOMEM;
+                goto error;
+        }
+
+        while (left > 3) {
+                /* only write multiples of 4 bytes, so there might */
+                /* be as many as 3 bytes left (at the end). */
+                len = left;
+
+                if (len > PAGE_SIZE)
+                        len = PAGE_SIZE;
+                len &= ~3;
+
+                if (drvdata->write_buffer_in_use) {
+                        memcpy(kbuf, drvdata->write_buffer,
+                                        drvdata->write_buffer_in_use);
+                        if (copy_from_user(
+                            (((char *)kbuf) + (drvdata->write_buffer_in_use)),
+                            buf + written,
+                            len - (drvdata->write_buffer_in_use))) {
+                                free_page((unsigned long)kbuf);
+                                status = -EFAULT;
+                                goto error;
+                        }
+                } else {
+                        if (copy_from_user(kbuf, buf + written, len)) {
+                                free_page((unsigned long)kbuf);
+                                status = -EFAULT;
+                                goto error;
+                        }
+                }
+
+                status = drvdata->config->set_configuration(drvdata,
+                                kbuf, len >> 2);
+
+                if (status) {
+                        free_page((unsigned long)kbuf);
+                        status = -EFAULT;
+                        goto error;
+                }
+                if (drvdata->write_buffer_in_use) {
+                        len -= drvdata->write_buffer_in_use;
+                        left -= drvdata->write_buffer_in_use;
+                        drvdata->write_buffer_in_use = 0;
+                }
+                written += len;
+                left -= len;
+        }
+        if ((left > 0) && (left < 4)) {
+                if (!copy_from_user(drvdata->write_buffer,
+                                                buf + written, left)) {
+                        drvdata->write_buffer_in_use = left;
+                        written += left;
+                        left = 0;
+                }
+        }
+
+        free_page((unsigned long)kbuf);
+        status = written;
+ error:
+        up(&drvdata->sem);
+        return status;
+}
+
+static int hwicap_open(struct inode *inode, struct file *file)
+{
+        struct hwicap_drvdata *drvdata;
+        int status;
+
+        drvdata = container_of(inode->i_cdev, struct hwicap_drvdata, cdev);
+
+        if (down_interruptible(&drvdata->sem))
+                return -ERESTARTSYS;
+
+        if (drvdata->is_open) {
+                status = -EBUSY;
+                goto error;
+        }
+
+        status = hwicap_initialize_hwicap(drvdata);
+        if (status) {
+                dev_err(drvdata->dev, "Failed to open file");
+                goto error;
+        }
+
+        file->private_data = drvdata;
+        drvdata->write_buffer_in_use = 0;
+        drvdata->read_buffer_in_use = 0;
+        drvdata->is_open = 1;
+
+ error:
+        up(&drvdata->sem);
+        return status;
+}
+
+static int hwicap_release(struct inode *inode, struct file *file)
+{
+        struct hwicap_drvdata *drvdata = file->private_data;
+        int i;
+        int status = 0;
+
+        if (down_interruptible(&drvdata->sem))
+                return -ERESTARTSYS;
+
+        if (drvdata->write_buffer_in_use) {
+                /* Flush write buffer. */
+                for (i = drvdata->write_buffer_in_use; i < 4; i++)
+                        drvdata->write_buffer[i] = 0;
+
+                status = drvdata->config->set_configuration(drvdata,
+                                (u32 *) drvdata->write_buffer, 1);
+                if (status)
+                        goto error;
+        }
+
+        status = hwicap_command_desync(drvdata);
+        if (status)
+                goto error;
+
+ error:
+        drvdata->is_open = 0;
+        up(&drvdata->sem);
+        return status;
+}
+
+static struct file_operations hwicap_fops = {
+        .owner = THIS_MODULE,
+        .write = hwicap_write,
+        .read = hwicap_read,
+        .open = hwicap_open,
+        .release = hwicap_release,
+};
+
+static int __devinit hwicap_setup(struct device *dev, int id,
+                const struct resource *regs_res,
+                const struct hwicap_driver_config *config,
+                const struct config_registers *config_regs)
+{
+        dev_t devt;
+        struct hwicap_drvdata *drvdata = NULL;
+        int retval = 0;
+
+        dev_info(dev, "Xilinx icap port driver\n");
+
+        if (id < 0) {
+                for (id = 0; id < HWICAP_DEVICES; id++)
+                        if (!probed_devices[id])
+                                break;
+        }
+        if (id < 0 || id >= HWICAP_DEVICES) {
+                dev_err(dev, "%s%i too large\n", DRIVER_NAME, id);
+                return -EINVAL;
+        }
+        if (probed_devices[id]) {
+                dev_err(dev, "cannot assign to %s%i; it is already in use\n",
+                        DRIVER_NAME, id);
+                return -EBUSY;
+        }
+
+        probed_devices[id] = 1;
+
+        devt = MKDEV(xhwicap_major, xhwicap_minor + id);
+
+        drvdata = kmalloc(sizeof(struct hwicap_drvdata), GFP_KERNEL);
+        if (!drvdata) {
+                dev_err(dev, "Couldn't allocate device private record\n");
+                return -ENOMEM;
+        }
+        memset((void *)drvdata, 0, sizeof(struct hwicap_drvdata));
+        dev_set_drvdata(dev, (void *)drvdata);
+
+        if (!regs_res) {
+                dev_err(dev, "Couldn't get registers resource\n");
+                retval = -EFAULT;
+                goto failed1;
+        }
+
+        drvdata->mem_start = regs_res->start;
+        drvdata->mem_end = regs_res->end;
+        drvdata->mem_size = regs_res->end - regs_res->start + 1;
+
+        if (!request_mem_region(drvdata->mem_start,
+                                        drvdata->mem_size, DRIVER_NAME)) {
+                dev_err(dev, "Couldn't lock memory region at %p\n",
+                        (void *)regs_res->start);
+                retval = -EBUSY;
+                goto failed1;
+        }
+
+        drvdata->devt = devt;
+        drvdata->dev = dev;
+        drvdata->base_address = ioremap(drvdata->mem_start, drvdata->mem_size);
+        if (!drvdata->base_address) {
+                dev_err(dev, "ioremap() failed\n");
+                goto failed2;
+        }
+
+        drvdata->config = config;
+        drvdata->config_regs = config_regs;
+
+        init_MUTEX(&drvdata->sem);
+        drvdata->is_open = 0;
+
+        dev_info(dev, "ioremap %lx to %p with size %x\n",
+                 (unsigned long int)drvdata->mem_start,
+                        drvdata->base_address, drvdata->mem_size);
+
+        cdev_init(&drvdata->cdev, &hwicap_fops);
+        drvdata->cdev.owner = THIS_MODULE;
+        retval = cdev_add(&drvdata->cdev, devt, 1);
+        if (retval) {
+                dev_err(dev, "cdev_add() failed\n");
+                goto failed3;
+        }
+        /*  devfs_mk_cdev(devt, S_IFCHR|S_IRUGO|S_IWUGO, DRIVER_NAME); */
+        class_device_create(icap_class, NULL, devt, NULL, DRIVER_NAME);
+        return 0;               /* success */
+
+ failed3:
+        iounmap(drvdata->base_address);
+
+ failed2:
+        release_mem_region(regs_res->start, drvdata->mem_size);
+
+ failed1:
+        kfree(drvdata);
+
+        return retval;
+}
+
+static struct hwicap_driver_config buffer_icap_config = {
+        .get_configuration = buffer_icap_get_configuration,
+        .set_configuration = buffer_icap_set_configuration,
+        .reset = buffer_icap_reset,
+};
+
+static struct hwicap_driver_config fifo_icap_config = {
+        .get_configuration = fifo_icap_get_configuration,
+        .set_configuration = fifo_icap_set_configuration,
+        .reset = fifo_icap_reset,
+};
+
+static int __devexit hwicap_remove(struct device *dev)
+{
+        struct hwicap_drvdata *drvdata;
+
+        drvdata = (struct hwicap_drvdata *)dev_get_drvdata(dev);
+
+        if (!drvdata)
+                return 0;
+
+        class_device_destroy(icap_class, drvdata->devt);
+        cdev_del(&drvdata->cdev);
+        iounmap(drvdata->base_address);
+        release_mem_region(drvdata->mem_start, drvdata->mem_size);
+        kfree(drvdata);
+        dev_set_drvdata(dev, NULL);
+        probed_devices[MINOR(dev->devt)-xhwicap_minor] = 0;
+
+        return 0;               /* success */
+}
+
+static int __devinit hwicap_drv_probe(struct platform_device *pdev)
+{
+        struct resource *res;
+        const struct config_registers *regs;
+        const char *family;
+
+        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        if (!res)
+                return -ENODEV;
+
+        /* It's most likely that we're using V4, if the family is not
+           specified */
+        regs = &v4_config_registers;
+        family = pdev->dev.platform_data;
+
+        if (family) {
+                if (!strcmp(family, "virtex2p")) {
+                        regs = &v2_config_registers;
+                } else if (!strcmp(family, "virtex4")) {
+                        regs = &v4_config_registers;
+                } else if (!strcmp(family, "virtex5")) {
+                        regs = &v5_config_registers;
+                }
+        }
+
+        return hwicap_setup(&pdev->dev, pdev->id, res,
+                        &buffer_icap_config, regs);
+}
+
+static int __devexit hwicap_drv_remove(struct platform_device *pdev)
+{
+        return hwicap_remove(&pdev->dev);
+}
+
+static struct platform_driver hwicap_platform_driver = {
+        .probe = hwicap_drv_probe,
+        .remove = hwicap_drv_remove,
+        .driver = {
+                .owner = THIS_MODULE,
+                .name = DRIVER_NAME,
+        },
+};
+
+/* ---------------------------------------------------------------------
+ * OF bus binding
+ */
+
+#if defined(CONFIG_OF)
+static int __devinit
+hwicap_of_probe(struct of_device *op, const struct of_device_id *match)
+{
+        struct resource res;
+        const unsigned int *id;
+        const char *family;
+        int rc;
+        const struct hwicap_driver_config *config = match->data;
+        const struct config_registers *regs;
+
+        dev_dbg(&op->dev, "hwicap_of_probe(%p, %p)\n", op, match);
+
+        rc = of_address_to_resource(op->node, 0, &res);
+        if (rc) {
+                dev_err(&op->dev, "invalid address\n");
+                return rc;
+        }
+
+        id = of_get_property(op->node, "port-number", NULL);
+
+        /* It's most likely that we're using V4, if the family is not
+           specified */
+        regs = &v4_config_registers;
+        family = of_get_property(op->node, "xlnx,family", NULL);
+
+        if (family) {
+                if (!strcmp(family, "virtex2p")) {
+                        regs = &v2_config_registers;
+                } else if (!strcmp(family, "virtex4")) {
+                        regs = &v4_config_registers;
+                } else if (!strcmp(family, "virtex5")) {
+                        regs = &v5_config_registers;
+                }
+        }
+        return hwicap_setup(&op->dev, id ? *id : -1, &res, config,
+                        regs);
+}
+
+static int __devexit hwicap_of_remove(struct of_device *op)
+{
+        return hwicap_remove(&op->dev);
+}
+
+/* Match table for of_platform binding */
+static const struct of_device_id __devinit hwicap_of_match[] = {
+        { .compatible = "xlnx,opb-hwicap-1.00.b", .data = &buffer_icap_config},
+        { .compatible = "xlnx,xps-hwicap-1.00.a", .data = &fifo_icap_config},
+        {},
+};
+MODULE_DEVICE_TABLE(of, hwicap_of_match);
+
+static struct of_platform_driver hwicap_of_driver = {
+        .owner = THIS_MODULE,
+        .name = DRIVER_NAME,
+        .match_table = hwicap_of_match,
+        .probe = hwicap_of_probe,
+        .remove = __devexit_p(hwicap_of_remove),
+        .driver = {
+                .name = DRIVER_NAME,
+        },
+};
+
+/* Registration helpers to keep the number of #ifdefs to a minimum */
+static inline int __devinit hwicap_of_register(void)
+{
+        pr_debug("hwicap: calling of_register_platform_driver()\n");
+        return of_register_platform_driver(&hwicap_of_driver);
+}
+
+static inline void __devexit hwicap_of_unregister(void)
+{
+        of_unregister_platform_driver(&hwicap_of_driver);
+}
+#else /* CONFIG_OF */
+/* CONFIG_OF not enabled; do nothing helpers */
+static inline int __devinit hwicap_of_register(void) { return 0; }
+static inline void __devexit hwicap_of_unregister(void) { }
+#endif /* CONFIG_OF */
+
+static int __devinit hwicap_module_init(void)
+{
+        dev_t devt;
+        int retval;
+
+        icap_class = class_create(THIS_MODULE, "xilinx_config");
+
+        if (xhwicap_major) {
+                devt = MKDEV(xhwicap_major, xhwicap_minor);
+                retval = register_chrdev_region(
+                                devt,
+                                HWICAP_DEVICES,
+                                DRIVER_NAME);
+                if (retval < 0)
+                        return retval;
+        } else {
+                retval = alloc_chrdev_region(&devt,
+                                xhwicap_minor,
+                                HWICAP_DEVICES,
+                                DRIVER_NAME);
+                if (retval < 0)
+                        return retval;
+                xhwicap_major = MAJOR(devt);
+        }
+
+        retval = platform_driver_register(&hwicap_platform_driver);
+
+        if (retval)
+                goto failed1;
+
+        retval = hwicap_of_register();
+
+        if (retval)
+                goto failed2;
+
+        return retval;
+
+ failed2:
+        platform_driver_unregister(&hwicap_platform_driver);
+
+ failed1:
+        unregister_chrdev_region(devt, HWICAP_DEVICES);
+
+        return retval;
+}
+
+static void __devexit hwicap_module_cleanup(void)
+{
+        dev_t devt = MKDEV(xhwicap_major, xhwicap_minor);
+
+        class_destroy(icap_class);
+
+        platform_driver_unregister(&hwicap_platform_driver);
+
+        hwicap_of_unregister();
+
+        unregister_chrdev_region(devt, HWICAP_DEVICES);
+}
+
+module_init(hwicap_module_init);
+module_exit(hwicap_module_cleanup);
+
+MODULE_AUTHOR("Xilinx, Inc; Xilinx Research Labs Group");
+MODULE_DESCRIPTION("Xilinx ICAP Port Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.h b/drivers/char/xilinx_hwicap/xilinx_hwicap.h
new file mode 100644
index 000000000000..ae771cac1629
--- /dev/null
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.h
@@ -0,0 +1,193 @@
+/*****************************************************************************
+ *
+ *     Author: Xilinx, Inc.
+ *
+ *     This program is free software; you can redistribute it and/or modify it
+ *     under the terms of the GNU General Public License as published by the
+ *     Free Software Foundation; either version 2 of the License, or (at your
+ *     option) any later version.
+ *
+ *     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS"
+ *     AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND
+ *     SOLUTIONS FOR XILINX DEVICES.  BY PROVIDING THIS DESIGN, CODE,
+ *     OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE,
+ *     APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION
+ *     THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT,
+ *     AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE
+ *     FOR YOUR IMPLEMENTATION.  XILINX EXPRESSLY DISCLAIMS ANY
+ *     WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE
+ *     IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR
+ *     REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF
+ *     INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ *     FOR A PARTICULAR PURPOSE.
+ *
+ *     Xilinx products are not intended for use in life support appliances,
+ *     devices, or systems. Use in such applications is expressly prohibited.
+ *
+ *     (c) Copyright 2003-2007 Xilinx Inc.
+ *     All rights reserved.
+ *
+ *     You should have received a copy of the GNU General Public License along
+ *     with this program; if not, write to the Free Software Foundation, Inc.,
+ *     675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *****************************************************************************/
+
+#ifndef XILINX_HWICAP_H_        /* prevent circular inclusions */
+#define XILINX_HWICAP_H_        /* by using protection macros */
+
+#include <linux/types.h>
+#include <linux/cdev.h>
+#include <linux/version.h>
+#include <linux/platform_device.h>
+
+#include <asm/io.h>
+
+struct hwicap_drvdata {
+        u32 write_buffer_in_use;  /* Always in [0,3] */
+        u8 write_buffer[4];
+        u32 read_buffer_in_use;   /* Always in [0,3] */
+        u8 read_buffer[4];
+        u32 mem_start;            /* phys. address of the control registers */
+        u32 mem_end;              /* phys. address of the control registers */
+        u32 mem_size;
+        void __iomem *base_address;/* virt. address of the control registers */
+
+        struct device *dev;
+        struct cdev cdev;       /* Char device structure */
+        dev_t devt;
+
+        const struct hwicap_driver_config *config;
+        const struct config_registers *config_regs;
+        void *private_data;
+        bool is_open;
+        struct semaphore sem;
+};
+
+struct hwicap_driver_config {
+        int (*get_configuration)(struct hwicap_drvdata *drvdata, u32 *data,
+                        u32 size);
+        int (*set_configuration)(struct hwicap_drvdata *drvdata, u32 *data,
+                        u32 size);
+        void (*reset)(struct hwicap_drvdata *drvdata);
+};
+
+/* Number of times to poll the done regsiter */
+#define XHI_MAX_RETRIES     10
+
+/************ Constant Definitions *************/
+
+#define XHI_PAD_FRAMES              0x1
+
+/* Mask for calculating configuration packet headers */
+#define XHI_WORD_COUNT_MASK_TYPE_1  0x7FFUL
+#define XHI_WORD_COUNT_MASK_TYPE_2  0x1FFFFFUL
+#define XHI_TYPE_MASK               0x7
+#define XHI_REGISTER_MASK           0xF
+#define XHI_OP_MASK                 0x3
+
+#define XHI_TYPE_SHIFT              29
+#define XHI_REGISTER_SHIFT          13
+#define XHI_OP_SHIFT                27
+
+#define XHI_TYPE_1                  1
+#define XHI_TYPE_2                  2
+#define XHI_OP_WRITE                2
+#define XHI_OP_READ                 1
+
+/* Address Block Types */
+#define XHI_FAR_CLB_BLOCK           0
+#define XHI_FAR_BRAM_BLOCK          1
+#define XHI_FAR_BRAM_INT_BLOCK      2
+
+struct config_registers {
+        u32 CRC;
+        u32 FAR;
+        u32 FDRI;
+        u32 FDRO;
+        u32 CMD;
+        u32 CTL;
+        u32 MASK;
+        u32 STAT;
+        u32 LOUT;
+        u32 COR;
+        u32 MFWR;
+        u32 FLR;
+        u32 KEY;
+        u32 CBC;
+        u32 IDCODE;
+        u32 AXSS;
+        u32 C0R_1;
+        u32 CSOB;
+        u32 WBSTAR;
+        u32 TIMER;
+        u32 BOOTSTS;
+        u32 CTL_1;
+};
+
+/* Configuration Commands */
+#define XHI_CMD_NULL                0
+#define XHI_CMD_WCFG                1
+#define XHI_CMD_MFW                 2
+#define XHI_CMD_DGHIGH              3
+#define XHI_CMD_RCFG                4
+#define XHI_CMD_START               5
+#define XHI_CMD_RCAP                6
+#define XHI_CMD_RCRC                7
+#define XHI_CMD_AGHIGH              8
+#define XHI_CMD_SWITCH              9
+#define XHI_CMD_GRESTORE            10
+#define XHI_CMD_SHUTDOWN            11
+#define XHI_CMD_GCAPTURE            12
+#define XHI_CMD_DESYNCH             13
+#define XHI_CMD_IPROG               15 /* Only in Virtex5 */
+#define XHI_CMD_CRCC                16 /* Only in Virtex5 */
+#define XHI_CMD_LTIMER              17 /* Only in Virtex5 */
+
+/* Packet constants */
+#define XHI_SYNC_PACKET             0xAA995566UL
+#define XHI_DUMMY_PACKET            0xFFFFFFFFUL
+#define XHI_NOOP_PACKET             (XHI_TYPE_1 << XHI_TYPE_SHIFT)
+#define XHI_TYPE_2_READ ((XHI_TYPE_2 << XHI_TYPE_SHIFT) | \
+                        (XHI_OP_READ << XHI_OP_SHIFT))
+
+#define XHI_TYPE_2_WRITE ((XHI_TYPE_2 << XHI_TYPE_SHIFT) | \
+                        (XHI_OP_WRITE << XHI_OP_SHIFT))
+
+#define XHI_TYPE2_CNT_MASK          0x07FFFFFF
+
+#define XHI_TYPE_1_PACKET_MAX_WORDS 2047UL
+#define XHI_TYPE_1_HEADER_BYTES     4
+#define XHI_TYPE_2_HEADER_BYTES     8
+
+/* Constant to use for CRC check when CRC has been disabled */
+#define XHI_DISABLED_AUTO_CRC       0x0000DEFCUL
+
+/**
+ * hwicap_type_1_read: Generates a Type 1 read packet header.
+ * @parameter: Register is the address of the register to be read back.
+ *
+ * Generates a Type 1 read packet header, which is used to indirectly
+ * read registers in the configuration logic.  This packet must then
+ * be sent through the icap device, and a return packet received with
+ * the information.
+ **/
+static inline u32 hwicap_type_1_read(u32 Register)
+{
+        return (XHI_TYPE_1 << XHI_TYPE_SHIFT) |
+                (Register << XHI_REGISTER_SHIFT) |
+                (XHI_OP_READ << XHI_OP_SHIFT);
+}
+
+/**
+ * hwicap_type_1_write: Generates a Type 1 write packet header
+ * @parameter: Register is the address of the register to be read back.
+ **/
+static inline u32 hwicap_type_1_write(u32 Register)
+{
+        return (XHI_TYPE_1 << XHI_TYPE_SHIFT) |
+                (Register << XHI_REGISTER_SHIFT) |
+                (XHI_OP_WRITE << XHI_OP_SHIFT);
+}
+
+#endif
diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c
index 80943409edb0..1a7bccebd503 100644
--- a/drivers/serial/uartlite.c
+++ b/drivers/serial/uartlite.c
@@ -17,10 +17,21 @@
 #include <linux/tty.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
+#include <linux/init.h>
 #include <asm/io.h>
 #if defined(CONFIG_OF)
+#include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/of_platform.h>
+
+/* Match table for of_platform binding */
+static struct of_device_id ulite_of_match[] __devinitdata = {
+        { .compatible = "xlnx,opb-uartlite-1.00.b", },
+        { .compatible = "xlnx,xps-uartlite-1.00.a", },
+        {}
+};
+MODULE_DEVICE_TABLE(of, ulite_of_match);
+
 #endif
 
 #define ULITE_NAME              "ttyUL"
@@ -275,6 +286,9 @@ static void ulite_release_port(struct uart_port *port)
 
 static int ulite_request_port(struct uart_port *port)
 {
+        pr_debug("ulite console: port=%p; port->mapbase=%x\n",
+                 port, port->mapbase);
+
         if (!request_mem_region(port->mapbase, ULITE_REGION, "uartlite")) {
                 dev_err(port->dev, "Memory region busy\n");
                 return -EBUSY;
@@ -375,32 +389,6 @@ static void ulite_console_write(struct console *co, const char *s,
                 spin_unlock_irqrestore(&port->lock, flags);
 }
 
-#if defined(CONFIG_OF)
-static inline void __init ulite_console_of_find_device(int id)
-{
-        struct device_node *np;
-        struct resource res;
-        const unsigned int *of_id;
-        int rc;
-
-        for_each_compatible_node(np, NULL, "xilinx,uartlite") {
-                of_id = of_get_property(np, "port-number", NULL);
-                if ((!of_id) || (*of_id != id))
-                        continue;
-
-                rc = of_address_to_resource(np, 0, &res);
-                if (rc)
-                        continue;
-
-                ulite_ports[id].mapbase = res.start;
-                of_node_put(np);
-                return;
-        }
-}
-#else /* CONFIG_OF */
-static inline void __init ulite_console_of_find_device(int id) { /* do nothing */ }
-#endif /* CONFIG_OF */
-
 static int __init ulite_console_setup(struct console *co, char *options)
 {
         struct uart_port *port;
@@ -414,11 +402,7 @@ static int __init ulite_console_setup(struct console *co, char *options)
 
         port = &ulite_ports[co->index];
 
-        /* Check if it is an OF device */
-        if (!port->mapbase)
-                ulite_console_of_find_device(co->index);
-
-        /* Do we have a device now? */
+        /* Has the device been initialized yet? */
         if (!port->mapbase) {
                 pr_debug("console on ttyUL%i not present\n", co->index);
                 return -ENODEV;
@@ -617,13 +601,6 @@ static int __devexit ulite_of_remove(struct of_device *op)
         return ulite_release(&op->dev);
 }
 
-/* Match table for of_platform binding */
-static struct of_device_id __devinit ulite_of_match[] = {
-        { .type = "serial", .compatible = "xilinx,uartlite", },
-        {},
-};
-MODULE_DEVICE_TABLE(of, ulite_of_match);
-
 static struct of_platform_driver ulite_of_driver = {
         .owner = THIS_MODULE,
         .name = "uartlite",
diff --git a/drivers/video/xilinxfb.c b/drivers/video/xilinxfb.c
index e38d3b7c3ad7..7b3a8423f485 100644
--- a/drivers/video/xilinxfb.c
+++ b/drivers/video/xilinxfb.c
@@ -459,8 +459,8 @@ static int __devexit xilinxfb_of_remove(struct of_device *op)
 }
 
 /* Match table for of_platform binding */
-static struct of_device_id __devinit xilinxfb_of_match[] = {
-        { .compatible = "xilinx,ml300-fb", },
+static struct of_device_id xilinxfb_of_match[] __devinitdata = {
+        { .compatible = "xlnx,plb-tft-cntlr-ref-1.00.a", },
         {},
 };
 MODULE_DEVICE_TABLE(of, xilinxfb_of_match);