Merge branch 'stericsson/cleanup' into next/timer

The timer and cleanup branches from stericsson conflict,
so I'm merging them here.

Conflicts:
	arch/arm/mach-ux500/Makefile
	arch/arm/mach-ux500/cpu.c

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

10 files changed, 270 insertions, 196 deletions

diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index be915a1ac404..6bd2f451c185 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -4,6 +4,7 @@
 
 obj-y                           := clock.o cpu.o devices.o devices-common.o \
                                    id.o usb.o timer.o
+obj-$(CONFIG_CACHE_L2X0)        += cache-l2x0.o
 obj-$(CONFIG_UX500_SOC_DB5500)  += cpu-db5500.o dma-db5500.o
 obj-$(CONFIG_UX500_SOC_DB8500)  += cpu-db8500.o devices-db8500.o
 obj-$(CONFIG_MACH_U8500)        += board-mop500.o board-mop500-sdi.o \
diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c
index f26fd76f72b4..4108c7bf324e 100644
--- a/arch/arm/mach-ux500/board-mop500-pins.c
+++ b/arch/arm/mach-ux500/board-mop500-pins.c
@@ -153,7 +153,7 @@ static pin_cfg_t mop500_pins_default[] = {
         GPIO7_U1_RTSn   | PIN_OUTPUT_HIGH,
 };
 
-static pin_cfg_t mop500_pins_hrefv60[] = {
+static pin_cfg_t hrefv60_pins[] = {
         /* WLAN */
         GPIO4_GPIO              | PIN_INPUT_PULLUP,/* WLAN_IRQ */
         GPIO85_GPIO             | PIN_OUTPUT_LOW,/* WLAN_ENA */
@@ -279,14 +279,26 @@ static pin_cfg_t snowball_pins[] = {
 void __init mop500_pins_init(void)
 {
         nmk_config_pins(mop500_pins_common,
-                                ARRAY_SIZE(mop500_pins_common));
-        if (machine_is_hrefv60())
-                nmk_config_pins(mop500_pins_hrefv60,
-                                ARRAY_SIZE(mop500_pins_hrefv60));
-        else if (machine_is_snowball())
-                nmk_config_pins(snowball_pins,
-                                ARRAY_SIZE(snowball_pins));
-        else
-                nmk_config_pins(mop500_pins_default,
-                                ARRAY_SIZE(mop500_pins_default));
+                        ARRAY_SIZE(mop500_pins_common));
+
+        nmk_config_pins(mop500_pins_default,
+                        ARRAY_SIZE(mop500_pins_default));
+}
+
+void __init snowball_pins_init(void)
+{
+        nmk_config_pins(mop500_pins_common,
+                        ARRAY_SIZE(mop500_pins_common));
+
+        nmk_config_pins(snowball_pins,
+                        ARRAY_SIZE(snowball_pins));
+}
+
+void __init hrefv60_pins_init(void)
+{
+        nmk_config_pins(mop500_pins_common,
+                        ARRAY_SIZE(mop500_pins_common));
+
+        nmk_config_pins(hrefv60_pins,
+                        ARRAY_SIZE(hrefv60_pins));
 }
diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
index d0cb9e5eb87c..6826faeecc68 100644
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ b/arch/arm/mach-ux500/board-mop500-sdi.c
@@ -216,30 +216,48 @@ void __init mop500_sdi_init(void)
         /* PoP:ed eMMC on top of DB8500 v1.0 has problems with high speed */
         if (!cpu_is_u8500v10())
                 mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED;
-        /* sdi2 on snowball is in ATL_B mode for FSMC (LAN) */
-        if (!machine_is_snowball())
-                db8500_add_sdi2(&mop500_sdi2_data, periphid);
+
+        db8500_add_sdi2(&mop500_sdi2_data, periphid);
 
         /* On-board eMMC */
         db8500_add_sdi4(&mop500_sdi4_data, periphid);
 
-        if (machine_is_hrefv60() || machine_is_snowball()) {
-                if (machine_is_hrefv60()) {
-                        mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO;
-                        sdi0_en = HREFV60_SDMMC_EN_GPIO;
-                        sdi0_vsel = HREFV60_SDMMC_1V8_3V_GPIO;
-                } else if (machine_is_snowball()) {
-                        mop500_sdi0_data.gpio_cd = SNOWBALL_SDMMC_CD_GPIO;
-                        mop500_sdi0_data.cd_invert = true;
-                        sdi0_en = SNOWBALL_SDMMC_EN_GPIO;
-                        sdi0_vsel = SNOWBALL_SDMMC_1V8_3V_GPIO;
-                }
-                sdi0_configure();
-        }
-
         /*
          * On boards with the TC35892 GPIO expander, sdi0 will finally
          * be added when the TC35892 initializes and calls
          * mop500_sdi_tc35892_init() above.
          */
 }
+
+void __init snowball_sdi_init(void)
+{
+        u32 periphid = 0x10480180;
+
+        mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED;
+
+        /* On-board eMMC */
+        db8500_add_sdi4(&mop500_sdi4_data, periphid);
+
+        mop500_sdi0_data.gpio_cd = SNOWBALL_SDMMC_CD_GPIO;
+        mop500_sdi0_data.cd_invert = true;
+        sdi0_en = SNOWBALL_SDMMC_EN_GPIO;
+        sdi0_vsel = SNOWBALL_SDMMC_1V8_3V_GPIO;
+        sdi0_configure();
+}
+
+void __init hrefv60_sdi_init(void)
+{
+        u32 periphid = 0x10480180;
+
+        mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED;
+
+        db8500_add_sdi2(&mop500_sdi2_data, periphid);
+
+        /* On-board eMMC */
+        db8500_add_sdi4(&mop500_sdi4_data, periphid);
+
+        mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO;
+        sdi0_en = HREFV60_SDMMC_EN_GPIO;
+        sdi0_vsel = HREFV60_SDMMC_1V8_3V_GPIO;
+        sdi0_configure();
+}
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index cd54abaccd96..6c00d4920396 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -603,28 +603,72 @@ static void __init mop500_init_machine(void)
 {
         int i2c0_devs;
 
+        mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
+
+        u8500_init_devices();
+
+        mop500_pins_init();
+
+        platform_add_devices(mop500_platform_devs,
+                        ARRAY_SIZE(mop500_platform_devs));
+
+        mop500_i2c_init();
+        mop500_sdi_init();
+        mop500_spi_init();
+        mop500_uart_init();
+
+        i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
+
+        i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
+        i2c_register_board_info(2, mop500_i2c2_devices,
+                                ARRAY_SIZE(mop500_i2c2_devices));
+
+        /* This board has full regulator constraints */
+        regulator_has_full_constraints();
+}
+
+static void __init snowball_init_machine(void)
+{
+        int i2c0_devs;
+
+        u8500_init_devices();
+
+        snowball_pins_init();
+
+        platform_add_devices(snowball_platform_devs,
+                        ARRAY_SIZE(snowball_platform_devs));
+
+        mop500_i2c_init();
+        snowball_sdi_init();
+        mop500_spi_init();
+        mop500_uart_init();
+
+        i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
+        i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
+        i2c_register_board_info(2, mop500_i2c2_devices,
+                                ARRAY_SIZE(mop500_i2c2_devices));
+
+        /* This board has full regulator constraints */
+        regulator_has_full_constraints();
+}
+
+static void __init hrefv60_init_machine(void)
+{
+        int i2c0_devs;
+
         /*
          * The HREFv60 board removed a GPIO expander and routed
          * all these GPIO pins to the internal GPIO controller
          * instead.
          */
-        if (!machine_is_snowball()) {
-                if (machine_is_hrefv60())
-                        mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;
-                else
-                        mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
-        }
+        mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;
 
         u8500_init_devices();
 
-        mop500_pins_init();
+        hrefv60_pins_init();
 
-        if (machine_is_snowball())
-                platform_add_devices(snowball_platform_devs,
-                                        ARRAY_SIZE(snowball_platform_devs));
-        else
-                platform_add_devices(mop500_platform_devs,
-                                        ARRAY_SIZE(mop500_platform_devs));
+        platform_add_devices(mop500_platform_devs,
+                        ARRAY_SIZE(mop500_platform_devs));
 
         mop500_i2c_init();
         mop500_sdi_init();
@@ -632,8 +676,8 @@ static void __init mop500_init_machine(void)
         mop500_uart_init();
 
         i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
-        if (machine_is_hrefv60())
-                i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES;
+
+        i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES;
 
         i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
         i2c_register_board_info(2, mop500_i2c2_devices,
@@ -658,7 +702,7 @@ MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+")
         .map_io         = u8500_map_io,
         .init_irq       = ux500_init_irq,
         .timer          = &ux500_timer,
-        .init_machine   = mop500_init_machine,
+        .init_machine   = hrefv60_init_machine,
 MACHINE_END
 
 MACHINE_START(SNOWBALL, "Calao Systems Snowball platform")
@@ -667,5 +711,5 @@ MACHINE_START(SNOWBALL, "Calao Systems Snowball platform")
         .init_irq       = ux500_init_irq,
         /* we re-use nomadik timer here */
         .timer          = &ux500_timer,
-        .init_machine   = mop500_init_machine,
+        .init_machine   = snowball_init_machine,
 MACHINE_END
diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
index ee77a8970c33..de18a2a23e6e 100644
--- a/arch/arm/mach-ux500/board-mop500.h
+++ b/arch/arm/mach-ux500/board-mop500.h
@@ -40,10 +40,13 @@
 struct i2c_board_info;
 
 extern void mop500_sdi_init(void);
+extern void snowball_sdi_init(void);
 extern void mop500_sdi_tc35892_init(void);
 void __init mop500_u8500uib_init(void);
 void __init mop500_stuib_init(void);
 void __init mop500_pins_init(void);
+void __init hrefv60_pins_init(void);
+void __init snowball_pins_init(void);
 
 void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info,
                 unsigned n);
diff --git a/arch/arm/mach-ux500/cache-l2x0.c b/arch/arm/mach-ux500/cache-l2x0.c
new file mode 100644
index 000000000000..9d09e4d013b9
--- /dev/null
+++ b/arch/arm/mach-ux500/cache-l2x0.c
@@ -0,0 +1,72 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2011
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/io.h>
+#include <asm/cacheflush.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <mach/hardware.h>
+#include <mach/id.h>
+
+static void __iomem *l2x0_base;
+
+static inline void ux500_cache_wait(void __iomem *reg, unsigned long mask)
+{
+        /* wait for the operation to complete */
+        while (readl_relaxed(reg) & mask)
+                cpu_relax();
+}
+
+static inline void ux500_cache_sync(void)
+{
+        writel_relaxed(0, l2x0_base + L2X0_CACHE_SYNC);
+        ux500_cache_wait(l2x0_base + L2X0_CACHE_SYNC, 1);
+}
+
+/*
+ * The L2 cache cannot be turned off in the non-secure world.
+ * Dummy until a secure service is in place.
+ */
+static void ux500_l2x0_disable(void)
+{
+}
+
+/*
+ * This is only called when doing a kexec, just after turning off the L2
+ * and L1 cache, and it is surrounded by a spinlock in the generic version.
+ * However, we're not really turning off the L2 cache right now and the
+ * PL310 does not support exclusive accesses (used to implement the spinlock).
+ * So, the invalidation needs to be done without the spinlock.
+ */
+static void ux500_l2x0_inv_all(void)
+{
+        uint32_t l2x0_way_mask = (1<<16) - 1;   /* Bitmask of active ways */
+
+        /* invalidate all ways */
+        writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_INV_WAY);
+        ux500_cache_wait(l2x0_base + L2X0_INV_WAY, l2x0_way_mask);
+        ux500_cache_sync();
+}
+
+static int ux500_l2x0_init(void)
+{
+        if (cpu_is_u5500())
+                l2x0_base = __io_address(U5500_L2CC_BASE);
+        else if (cpu_is_u8500())
+                l2x0_base = __io_address(U8500_L2CC_BASE);
+        else
+                ux500_unknown_soc();
+
+        /* 64KB way size, 8 way associativity, force WA */
+        l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff);
+
+        /* Override invalidate function */
+        outer_cache.disable = ux500_l2x0_disable;
+        outer_cache.inv_all = ux500_l2x0_inv_all;
+
+        return 0;
+}
+
+early_initcall(ux500_l2x0_init);
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index 797f3642fc30..1405d0eb7edb 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -12,8 +12,6 @@
 #include <linux/mfd/db5500-prcmu.h>
 #include <linux/clksrc-dbx500-prcmu.h>
 
-#include <asm/cacheflush.h>
-#include <asm/hardware/cache-l2x0.h>
 #include <asm/hardware/gic.h>
 #include <asm/mach/map.h>
 #include <asm/localtimer.h>
@@ -26,10 +24,6 @@
 
 void __iomem *_PRCMU_BASE;
 
-#ifdef CONFIG_CACHE_L2X0
-static void __iomem *l2x0_base;
-#endif
-
 void __init ux500_init_irq(void)
 {
         void __iomem *dist_base;
@@ -56,66 +50,3 @@ void __init ux500_init_irq(void)
                 prcmu_early_init();
         clk_init();
 }
-
-#ifdef CONFIG_CACHE_L2X0
-static inline void ux500_cache_wait(void __iomem *reg, unsigned long mask)
-{
-        /* wait for the operation to complete */
-        while (readl_relaxed(reg) & mask)
-                ;
-}
-
-static inline void ux500_cache_sync(void)
-{
-        void __iomem *base = l2x0_base;
-
-        writel_relaxed(0, base + L2X0_CACHE_SYNC);
-        ux500_cache_wait(base + L2X0_CACHE_SYNC, 1);
-}
-
-/*
- * The L2 cache cannot be turned off in the non-secure world.
- * Dummy until a secure service is in place.
- */
-static void ux500_l2x0_disable(void)
-{
-}
-
-/*
- * This is only called when doing a kexec, just after turning off the L2
- * and L1 cache, and it is surrounded by a spinlock in the generic version.
- * However, we're not really turning off the L2 cache right now and the
- * PL310 does not support exclusive accesses (used to implement the spinlock).
- * So, the invalidation needs to be done without the spinlock.
- */
-static void ux500_l2x0_inv_all(void)
-{
-        void __iomem *base = l2x0_base;
-        uint32_t l2x0_way_mask = (1<<16) - 1;   /* Bitmask of active ways */
-
-        /* invalidate all ways */
-        writel_relaxed(l2x0_way_mask, base + L2X0_INV_WAY);
-        ux500_cache_wait(base + L2X0_INV_WAY, l2x0_way_mask);
-        ux500_cache_sync();
-}
-
-static int ux500_l2x0_init(void)
-{
-        if (cpu_is_u5500())
-                l2x0_base = __io_address(U5500_L2CC_BASE);
-        else if (cpu_is_u8500())
-                l2x0_base = __io_address(U8500_L2CC_BASE);
-        else
-                ux500_unknown_soc();
-
-        /* 64KB way size, 8 way associativity, force WA */
-        l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff);
-
-        /* Override invalidate function */
-        outer_cache.disable = ux500_l2x0_disable;
-        outer_cache.inv_all = ux500_l2x0_inv_all;
-
-        return 0;
-}
-early_initcall(ux500_l2x0_init);
-#endif
diff --git a/arch/arm/mach-ux500/include/mach/uncompress.h b/arch/arm/mach-ux500/include/mach/uncompress.h
index 7dd08074c37b..6fb3c4b0105d 100644
--- a/arch/arm/mach-ux500/include/mach/uncompress.h
+++ b/arch/arm/mach-ux500/include/mach/uncompress.h
@@ -51,15 +51,9 @@ static void flush(void)
 static inline void arch_decomp_setup(void)
 {
         /* Check in run time if we run on an U8500 or U5500 */
-        if (machine_is_u8500() ||
-            machine_is_svp8500v1() ||
-            machine_is_svp8500v2() ||
-            machine_is_hrefv60()   ||
-            machine_is_snowball())
-                ux500_uart_base = U8500_UART2_BASE;
-        else if (machine_is_u5500())
+        if (machine_is_u5500())
                 ux500_uart_base = U5500_UART0_BASE;
-        else /* not much can be done to help here */
+        else
                 ux500_uart_base = U8500_UART2_BASE;
 }
 
diff --git a/arch/arm/mach-ux500/pins-db8500.h b/arch/arm/mach-ux500/pins-db8500.h
index f923764ee16c..8b1d1a7a679e 100644
--- a/arch/arm/mach-ux500/pins-db8500.h
+++ b/arch/arm/mach-ux500/pins-db8500.h
@@ -35,40 +35,40 @@
 
 #define GPIO4_GPIO              PIN_CFG(4, GPIO)
 #define GPIO4_U1_RXD            PIN_CFG(4, ALT_A)
-#define GPIO4_I2C4_SCL          PIN_CFG_PULL(4, ALT_B, UP)
+#define GPIO4_I2C4_SCL          PIN_CFG_INPUT(4, ALT_B, PULLUP)
 #define GPIO4_IP_TRSTn          PIN_CFG(4, ALT_C)
 
 #define GPIO5_GPIO              PIN_CFG(5, GPIO)
 #define GPIO5_U1_TXD            PIN_CFG(5, ALT_A)
-#define GPIO5_I2C4_SDA          PIN_CFG_PULL(5, ALT_B, UP)
+#define GPIO5_I2C4_SDA          PIN_CFG_INPUT(5, ALT_B, PULLUP)
 #define GPIO5_IP_GPIO6          PIN_CFG(5, ALT_C)
 
 #define GPIO6_GPIO              PIN_CFG(6, GPIO)
 #define GPIO6_U1_CTSn           PIN_CFG(6, ALT_A)
-#define GPIO6_I2C1_SCL          PIN_CFG_PULL(6, ALT_B, UP)
+#define GPIO6_I2C1_SCL          PIN_CFG_INPUT(6, ALT_B, PULLUP)
 #define GPIO6_IP_GPIO0          PIN_CFG(6, ALT_C)
 
 #define GPIO7_GPIO              PIN_CFG(7, GPIO)
 #define GPIO7_U1_RTSn           PIN_CFG(7, ALT_A)
-#define GPIO7_I2C1_SDA          PIN_CFG_PULL(7, ALT_B, UP)
+#define GPIO7_I2C1_SDA          PIN_CFG_INPUT(7, ALT_B, PULLUP)
 #define GPIO7_IP_GPIO1          PIN_CFG(7, ALT_C)
 
 #define GPIO8_GPIO              PIN_CFG(8, GPIO)
-#define GPIO8_IPI2C_SDA         PIN_CFG_PULL(8, ALT_A, UP)
-#define GPIO8_I2C2_SDA          PIN_CFG_PULL(8, ALT_B, UP)
+#define GPIO8_IPI2C_SDA         PIN_CFG_INPUT(8, ALT_A, PULLUP)
+#define GPIO8_I2C2_SDA          PIN_CFG_INPUT(8, ALT_B, PULLUP)
 
 #define GPIO9_GPIO              PIN_CFG(9, GPIO)
-#define GPIO9_IPI2C_SCL         PIN_CFG_PULL(9, ALT_A, UP)
-#define GPIO9_I2C2_SCL          PIN_CFG_PULL(9, ALT_B, UP)
+#define GPIO9_IPI2C_SCL         PIN_CFG_INPUT(9, ALT_A, PULLUP)
+#define GPIO9_I2C2_SCL          PIN_CFG_INPUT(9, ALT_B, PULLUP)
 
 #define GPIO10_GPIO             PIN_CFG(10, GPIO)
-#define GPIO10_IPI2C_SDA        PIN_CFG_PULL(10, ALT_A, UP)
-#define GPIO10_I2C2_SDA         PIN_CFG_PULL(10, ALT_B, UP)
+#define GPIO10_IPI2C_SDA        PIN_CFG_INPUT(10, ALT_A, PULLUP)
+#define GPIO10_I2C2_SDA         PIN_CFG_INPUT(10, ALT_B, PULLUP)
 #define GPIO10_IP_GPIO3         PIN_CFG(10, ALT_C)
 
 #define GPIO11_GPIO             PIN_CFG(11, GPIO)
-#define GPIO11_IPI2C_SCL        PIN_CFG_PULL(11, ALT_A, UP)
-#define GPIO11_I2C2_SCL         PIN_CFG_PULL(11, ALT_B, UP)
+#define GPIO11_IPI2C_SCL        PIN_CFG_INPUT(11, ALT_A, PULLUP)
+#define GPIO11_I2C2_SCL         PIN_CFG_INPUT(11, ALT_B, PULLUP)
 #define GPIO11_IP_GPIO2         PIN_CFG(11, ALT_C)
 
 #define GPIO12_GPIO             PIN_CFG(12, GPIO)
@@ -87,66 +87,66 @@
 
 #define GPIO16_GPIO             PIN_CFG(16, GPIO)
 #define GPIO16_MSP0_RFS         PIN_CFG(16, ALT_A)
-#define GPIO16_I2C1_SCL         PIN_CFG_PULL(16, ALT_B, UP)
+#define GPIO16_I2C1_SCL         PIN_CFG_INPUT(16, ALT_B, PULLUP)
 #define GPIO16_SLIM0_DAT        PIN_CFG(16, ALT_C)
 
 #define GPIO17_GPIO             PIN_CFG(17, GPIO)
 #define GPIO17_MSP0_RCK         PIN_CFG(17, ALT_A)
-#define GPIO17_I2C1_SDA         PIN_CFG_PULL(17, ALT_B, UP)
+#define GPIO17_I2C1_SDA         PIN_CFG_INPUT(17, ALT_B, PULLUP)
 #define GPIO17_SLIM0_CLK        PIN_CFG(17, ALT_C)
 
 #define GPIO18_GPIO             PIN_CFG(18, GPIO)
-#define GPIO18_MC0_CMDDIR       PIN_CFG_PULL(18, ALT_A, UP)
+#define GPIO18_MC0_CMDDIR       PIN_CFG_INPUT(18, ALT_A, PULLUP)
 #define GPIO18_U2_RXD           PIN_CFG(18, ALT_B)
 #define GPIO18_MS_IEP           PIN_CFG(18, ALT_C)
 
 #define GPIO19_GPIO             PIN_CFG(19, GPIO)
-#define GPIO19_MC0_DAT0DIR      PIN_CFG_PULL(19, ALT_A, UP)
+#define GPIO19_MC0_DAT0DIR      PIN_CFG_INPUT(19, ALT_A, PULLUP)
 #define GPIO19_U2_TXD           PIN_CFG(19, ALT_B)
 #define GPIO19_MS_DAT0DIR       PIN_CFG(19, ALT_C)
 
 #define GPIO20_GPIO             PIN_CFG(20, GPIO)
-#define GPIO20_MC0_DAT2DIR      PIN_CFG_PULL(20, ALT_A, UP)
+#define GPIO20_MC0_DAT2DIR      PIN_CFG_INPUT(20, ALT_A, PULLUP)
 #define GPIO20_UARTMOD_TXD      PIN_CFG(20, ALT_B)
 #define GPIO20_IP_TRIGOUT       PIN_CFG(20, ALT_C)
 
 #define GPIO21_GPIO             PIN_CFG(21, GPIO)
-#define GPIO21_MC0_DAT31DIR     PIN_CFG_PULL(21, ALT_A, UP)
+#define GPIO21_MC0_DAT31DIR     PIN_CFG_INPUT(21, ALT_A, PULLUP)
 #define GPIO21_MSP0_SCK         PIN_CFG(21, ALT_B)
 #define GPIO21_MS_DAT31DIR      PIN_CFG(21, ALT_C)
 
 #define GPIO22_GPIO             PIN_CFG(22, GPIO)
-#define GPIO22_MC0_FBCLK        PIN_CFG_PULL(22, ALT_A, UP)
+#define GPIO22_MC0_FBCLK        PIN_CFG_INPUT(22, ALT_A, PULLUP)
 #define GPIO22_UARTMOD_RXD      PIN_CFG(22, ALT_B)
 #define GPIO22_MS_FBCLK         PIN_CFG(22, ALT_C)
 
 #define GPIO23_GPIO             PIN_CFG(23, GPIO)
-#define GPIO23_MC0_CLK          PIN_CFG_PULL(23, ALT_A, UP)
+#define GPIO23_MC0_CLK          PIN_CFG_INPUT(23, ALT_A, PULLUP)
 #define GPIO23_STMMOD_CLK       PIN_CFG(23, ALT_B)
 #define GPIO23_MS_CLK           PIN_CFG(23, ALT_C)
 
 #define GPIO24_GPIO             PIN_CFG(24, GPIO)
-#define GPIO24_MC0_CMD          PIN_CFG_PULL(24, ALT_A, UP)
+#define GPIO24_MC0_CMD          PIN_CFG_INPUT(24, ALT_A, PULLUP)
 #define GPIO24_UARTMOD_RXD      PIN_CFG(24, ALT_B)
 #define GPIO24_MS_BS            PIN_CFG(24, ALT_C)
 
 #define GPIO25_GPIO             PIN_CFG(25, GPIO)
-#define GPIO25_MC0_DAT0         PIN_CFG_PULL(25, ALT_A, UP)
+#define GPIO25_MC0_DAT0         PIN_CFG_INPUT(25, ALT_A, PULLUP)
 #define GPIO25_STMMOD_DAT0      PIN_CFG(25, ALT_B)
 #define GPIO25_MS_DAT0          PIN_CFG(25, ALT_C)
 
 #define GPIO26_GPIO             PIN_CFG(26, GPIO)
-#define GPIO26_MC0_DAT1         PIN_CFG_PULL(26, ALT_A, UP)
+#define GPIO26_MC0_DAT1         PIN_CFG_INPUT(26, ALT_A, PULLUP)
 #define GPIO26_STMMOD_DAT1      PIN_CFG(26, ALT_B)
 #define GPIO26_MS_DAT1          PIN_CFG(26, ALT_C)
 
 #define GPIO27_GPIO             PIN_CFG(27, GPIO)
-#define GPIO27_MC0_DAT2         PIN_CFG_PULL(27, ALT_A, UP)
+#define GPIO27_MC0_DAT2         PIN_CFG_INPUT(27, ALT_A, PULLUP)
 #define GPIO27_STMMOD_DAT2      PIN_CFG(27, ALT_B)
 #define GPIO27_MS_DAT2          PIN_CFG(27, ALT_C)
 
 #define GPIO28_GPIO             PIN_CFG(28, GPIO)
-#define GPIO28_MC0_DAT3         PIN_CFG_PULL(28, ALT_A, UP)
+#define GPIO28_MC0_DAT3         PIN_CFG_INPUT(28, ALT_A, PULLUP)
 #define GPIO28_STMMOD_DAT3      PIN_CFG(28, ALT_B)
 #define GPIO28_MS_DAT3          PIN_CFG(28, ALT_C)
 
@@ -357,48 +357,48 @@
 #define GPIO97_MC5_DAT7         PIN_CFG(97, ALT_C)
 
 #define GPIO128_GPIO            PIN_CFG(128, GPIO)
-#define GPIO128_MC2_CLK         PIN_CFG_PULL(128, ALT_A, UP)
+#define GPIO128_MC2_CLK         PIN_CFG_INPUT(128, ALT_A, PULLUP)
 #define GPIO128_SM_CKO          PIN_CFG(128, ALT_B)
 
 #define GPIO129_GPIO            PIN_CFG(129, GPIO)
-#define GPIO129_MC2_CMD         PIN_CFG_PULL(129, ALT_A, UP)
+#define GPIO129_MC2_CMD         PIN_CFG_INPUT(129, ALT_A, PULLUP)
 #define GPIO129_SM_WAIT0n       PIN_CFG(129, ALT_B)
 
 #define GPIO130_GPIO            PIN_CFG(130, GPIO)
-#define GPIO130_MC2_FBCLK       PIN_CFG_PULL(130, ALT_A, UP)
+#define GPIO130_MC2_FBCLK       PIN_CFG_INPUT(130, ALT_A, PULLUP)
 #define GPIO130_SM_FBCLK        PIN_CFG(130, ALT_B)
 #define GPIO130_MC2_RSTN        PIN_CFG(130, ALT_C)
 
 #define GPIO131_GPIO            PIN_CFG(131, GPIO)
-#define GPIO131_MC2_DAT0        PIN_CFG_PULL(131, ALT_A, UP)
+#define GPIO131_MC2_DAT0        PIN_CFG_INPUT(131, ALT_A, PULLUP)
 #define GPIO131_SM_ADQ8         PIN_CFG(131, ALT_B)
 
 #define GPIO132_GPIO            PIN_CFG(132, GPIO)
-#define GPIO132_MC2_DAT1        PIN_CFG_PULL(132, ALT_A, UP)
+#define GPIO132_MC2_DAT1        PIN_CFG_INPUT(132, ALT_A, PULLUP)
 #define GPIO132_SM_ADQ9         PIN_CFG(132, ALT_B)
 
 #define GPIO133_GPIO            PIN_CFG(133, GPIO)
-#define GPIO133_MC2_DAT2        PIN_CFG_PULL(133, ALT_A, UP)
+#define GPIO133_MC2_DAT2        PIN_CFG_INPUT(133, ALT_A, PULLUP)
 #define GPIO133_SM_ADQ10        PIN_CFG(133, ALT_B)
 
 #define GPIO134_GPIO            PIN_CFG(134, GPIO)
-#define GPIO134_MC2_DAT3        PIN_CFG_PULL(134, ALT_A, UP)
+#define GPIO134_MC2_DAT3        PIN_CFG_INPUT(134, ALT_A, PULLUP)
 #define GPIO134_SM_ADQ11        PIN_CFG(134, ALT_B)
 
 #define GPIO135_GPIO            PIN_CFG(135, GPIO)
-#define GPIO135_MC2_DAT4        PIN_CFG_PULL(135, ALT_A, UP)
+#define GPIO135_MC2_DAT4        PIN_CFG_INPUT(135, ALT_A, PULLUP)
 #define GPIO135_SM_ADQ12        PIN_CFG(135, ALT_B)
 
 #define GPIO136_GPIO            PIN_CFG(136, GPIO)
-#define GPIO136_MC2_DAT5        PIN_CFG_PULL(136, ALT_A, UP)
+#define GPIO136_MC2_DAT5        PIN_CFG_INPUT(136, ALT_A, PULLUP)
 #define GPIO136_SM_ADQ13        PIN_CFG(136, ALT_B)
 
 #define GPIO137_GPIO            PIN_CFG(137, GPIO)
-#define GPIO137_MC2_DAT6        PIN_CFG_PULL(137, ALT_A, UP)
+#define GPIO137_MC2_DAT6        PIN_CFG_INPUT(137, ALT_A, PULLUP)
 #define GPIO137_SM_ADQ14        PIN_CFG(137, ALT_B)
 
 #define GPIO138_GPIO            PIN_CFG(138, GPIO)
-#define GPIO138_MC2_DAT7        PIN_CFG_PULL(138, ALT_A, UP)
+#define GPIO138_MC2_DAT7        PIN_CFG_INPUT(138, ALT_A, PULLUP)
 #define GPIO138_SM_ADQ15        PIN_CFG(138, ALT_B)
 
 #define GPIO139_GPIO            PIN_CFG(139, GPIO)
@@ -434,10 +434,10 @@
 #define GPIO146_SSP0_TXD        PIN_CFG(146, ALT_A)
 
 #define GPIO147_GPIO            PIN_CFG(147, GPIO)
-#define GPIO147_I2C0_SCL        PIN_CFG_PULL(147, ALT_A, UP)
+#define GPIO147_I2C0_SCL        PIN_CFG_INPUT(147, ALT_A, PULLUP)
 
 #define GPIO148_GPIO            PIN_CFG(148, GPIO)
-#define GPIO148_I2C0_SDA        PIN_CFG_PULL(148, ALT_A, UP)
+#define GPIO148_I2C0_SDA        PIN_CFG_INPUT(148, ALT_A, PULLUP)
 
 #define GPIO149_GPIO            PIN_CFG(149, GPIO)
 #define GPIO149_IP_GPIO0        PIN_CFG(149, ALT_A)
@@ -459,82 +459,82 @@
 #define GPIO152_KP_O9           PIN_CFG(152, ALT_C)
 
 #define GPIO153_GPIO            PIN_CFG(153, GPIO)
-#define GPIO153_KP_I7           PIN_CFG_PULL(153, ALT_A, DOWN)
+#define GPIO153_KP_I7           PIN_CFG_INPUT(153, ALT_A, PULLDOWN)
 #define GPIO153_LCD_D24         PIN_CFG(153, ALT_B)
 #define GPIO153_U2_RXD          PIN_CFG(153, ALT_C)
 
 #define GPIO154_GPIO            PIN_CFG(154, GPIO)
-#define GPIO154_KP_I6           PIN_CFG_PULL(154, ALT_A, DOWN)
+#define GPIO154_KP_I6           PIN_CFG_INPUT(154, ALT_A, PULLDOWN)
 #define GPIO154_LCD_D25         PIN_CFG(154, ALT_B)
 #define GPIO154_U2_TXD          PIN_CFG(154, ALT_C)
 
 #define GPIO155_GPIO            PIN_CFG(155, GPIO)
-#define GPIO155_KP_I5           PIN_CFG_PULL(155, ALT_A, DOWN)
+#define GPIO155_KP_I5           PIN_CFG_INPUT(155, ALT_A, PULLDOWN)
 #define GPIO155_LCD_D26         PIN_CFG(155, ALT_B)
 #define GPIO155_STMAPE_CLK      PIN_CFG(155, ALT_C)
 
 #define GPIO156_GPIO            PIN_CFG(156, GPIO)
-#define GPIO156_KP_I4           PIN_CFG_PULL(156, ALT_A, DOWN)
+#define GPIO156_KP_I4           PIN_CFG_INPUT(156, ALT_A, PULLDOWN)
 #define GPIO156_LCD_D27         PIN_CFG(156, ALT_B)
 #define GPIO156_STMAPE_DAT3     PIN_CFG(156, ALT_C)
 
 #define GPIO157_GPIO            PIN_CFG(157, GPIO)
-#define GPIO157_KP_O7           PIN_CFG_PULL(157, ALT_A, UP)
+#define GPIO157_KP_O7           PIN_CFG_INPUT(157, ALT_A, PULLUP)
 #define GPIO157_LCD_D28         PIN_CFG(157, ALT_B)
 #define GPIO157_STMAPE_DAT2     PIN_CFG(157, ALT_C)
 
 #define GPIO158_GPIO            PIN_CFG(158, GPIO)
-#define GPIO158_KP_O6           PIN_CFG_PULL(158, ALT_A, UP)
+#define GPIO158_KP_O6           PIN_CFG_INPUT(158, ALT_A, PULLUP)
 #define GPIO158_LCD_D29         PIN_CFG(158, ALT_B)
 #define GPIO158_STMAPE_DAT1     PIN_CFG(158, ALT_C)
 
 #define GPIO159_GPIO            PIN_CFG(159, GPIO)
-#define GPIO159_KP_O5           PIN_CFG_PULL(159, ALT_A, UP)
+#define GPIO159_KP_O5           PIN_CFG_INPUT(159, ALT_A, PULLUP)
 #define GPIO159_LCD_D30         PIN_CFG(159, ALT_B)
 #define GPIO159_STMAPE_DAT0     PIN_CFG(159, ALT_C)
 
 #define GPIO160_GPIO            PIN_CFG(160, GPIO)
-#define GPIO160_KP_O4           PIN_CFG_PULL(160, ALT_A, UP)
+#define GPIO160_KP_O4           PIN_CFG_INPUT(160, ALT_A, PULLUP)
 #define GPIO160_LCD_D31         PIN_CFG(160, ALT_B)
 #define GPIO160_NONE            PIN_CFG(160, ALT_C)
 
 #define GPIO161_GPIO            PIN_CFG(161, GPIO)
-#define GPIO161_KP_I3           PIN_CFG_PULL(161, ALT_A, DOWN)
+#define GPIO161_KP_I3           PIN_CFG_INPUT(161, ALT_A, PULLDOWN)
 #define GPIO161_LCD_D32         PIN_CFG(161, ALT_B)
 #define GPIO161_UARTMOD_RXD     PIN_CFG(161, ALT_C)
 
 #define GPIO162_GPIO            PIN_CFG(162, GPIO)
-#define GPIO162_KP_I2           PIN_CFG_PULL(162, ALT_A, DOWN)
+#define GPIO162_KP_I2           PIN_CFG_INPUT(162, ALT_A, PULLDOWN)
 #define GPIO162_LCD_D33         PIN_CFG(162, ALT_B)
 #define GPIO162_UARTMOD_TXD     PIN_CFG(162, ALT_C)
 
 #define GPIO163_GPIO            PIN_CFG(163, GPIO)
-#define GPIO163_KP_I1           PIN_CFG_PULL(163, ALT_A, DOWN)
+#define GPIO163_KP_I1           PIN_CFG_INPUT(163, ALT_A, PULLDOWN)
 #define GPIO163_LCD_D34         PIN_CFG(163, ALT_B)
 #define GPIO163_STMMOD_CLK      PIN_CFG(163, ALT_C)
 
 #define GPIO164_GPIO            PIN_CFG(164, GPIO)
-#define GPIO164_KP_I0           PIN_CFG_PULL(164, ALT_A, UP)
+#define GPIO164_KP_I0           PIN_CFG_INPUT(164, ALT_A, PULLUP)
 #define GPIO164_LCD_D35         PIN_CFG(164, ALT_B)
 #define GPIO164_STMMOD_DAT3     PIN_CFG(164, ALT_C)
 
 #define GPIO165_GPIO            PIN_CFG(165, GPIO)
-#define GPIO165_KP_O3           PIN_CFG_PULL(165, ALT_A, UP)
+#define GPIO165_KP_O3           PIN_CFG_INPUT(165, ALT_A, PULLUP)
 #define GPIO165_LCD_D36         PIN_CFG(165, ALT_B)
 #define GPIO165_STMMOD_DAT2     PIN_CFG(165, ALT_C)
 
 #define GPIO166_GPIO            PIN_CFG(166, GPIO)
-#define GPIO166_KP_O2           PIN_CFG_PULL(166, ALT_A, UP)
+#define GPIO166_KP_O2           PIN_CFG_INPUT(166, ALT_A, PULLUP)
 #define GPIO166_LCD_D37         PIN_CFG(166, ALT_B)
 #define GPIO166_STMMOD_DAT1     PIN_CFG(166, ALT_C)
 
 #define GPIO167_GPIO            PIN_CFG(167, GPIO)
-#define GPIO167_KP_O1           PIN_CFG_PULL(167, ALT_A, UP)
+#define GPIO167_KP_O1           PIN_CFG_INPUT(167, ALT_A, PULLUP)
 #define GPIO167_LCD_D38         PIN_CFG(167, ALT_B)
 #define GPIO167_STMMOD_DAT0     PIN_CFG(167, ALT_C)
 
 #define GPIO168_GPIO            PIN_CFG(168, GPIO)
-#define GPIO168_KP_O0           PIN_CFG_PULL(168, ALT_A, UP)
+#define GPIO168_KP_O0           PIN_CFG_INPUT(168, ALT_A, PULLUP)
 #define GPIO168_LCD_D39         PIN_CFG(168, ALT_B)
 #define GPIO168_NONE            PIN_CFG(168, ALT_C)
 
@@ -569,39 +569,39 @@
 #define GPIO196_MSP2_RXD        PIN_CFG(196, ALT_A)
 
 #define GPIO197_GPIO            PIN_CFG(197, GPIO)
-#define GPIO197_MC4_DAT3        PIN_CFG_PULL(197, ALT_A, UP)
+#define GPIO197_MC4_DAT3        PIN_CFG_INPUT(197, ALT_A, PULLUP)
 
 #define GPIO198_GPIO            PIN_CFG(198, GPIO)
-#define GPIO198_MC4_DAT2        PIN_CFG_PULL(198, ALT_A, UP)
+#define GPIO198_MC4_DAT2        PIN_CFG_INPUT(198, ALT_A, PULLUP)
 
 #define GPIO199_GPIO            PIN_CFG(199, GPIO)
-#define GPIO199_MC4_DAT1        PIN_CFG_PULL(199, ALT_A, UP)
+#define GPIO199_MC4_DAT1        PIN_CFG_INPUT(199, ALT_A, PULLUP)
 
 #define GPIO200_GPIO            PIN_CFG(200, GPIO)
-#define GPIO200_MC4_DAT0        PIN_CFG_PULL(200, ALT_A, UP)
+#define GPIO200_MC4_DAT0        PIN_CFG_INPUT(200, ALT_A, PULLUP)
 
 #define GPIO201_GPIO            PIN_CFG(201, GPIO)
-#define GPIO201_MC4_CMD         PIN_CFG_PULL(201, ALT_A, UP)
+#define GPIO201_MC4_CMD         PIN_CFG_INPUT(201, ALT_A, PULLUP)
 
 #define GPIO202_GPIO            PIN_CFG(202, GPIO)
-#define GPIO202_MC4_FBCLK       PIN_CFG_PULL(202, ALT_A, UP)
+#define GPIO202_MC4_FBCLK       PIN_CFG_INPUT(202, ALT_A, PULLUP)
 #define GPIO202_PWL             PIN_CFG(202, ALT_B)
 #define GPIO202_MC4_RSTN        PIN_CFG(202, ALT_C)
 
 #define GPIO203_GPIO            PIN_CFG(203, GPIO)
-#define GPIO203_MC4_CLK         PIN_CFG_PULL(203, ALT_A, UP)
+#define GPIO203_MC4_CLK         PIN_CFG_INPUT(203, ALT_A, PULLUP)
 
 #define GPIO204_GPIO            PIN_CFG(204, GPIO)
-#define GPIO204_MC4_DAT7        PIN_CFG_PULL(204, ALT_A, UP)
+#define GPIO204_MC4_DAT7        PIN_CFG_INPUT(204, ALT_A, PULLUP)
 
 #define GPIO205_GPIO            PIN_CFG(205, GPIO)
-#define GPIO205_MC4_DAT6        PIN_CFG_PULL(205, ALT_A, UP)
+#define GPIO205_MC4_DAT6        PIN_CFG_INPUT(205, ALT_A, PULLUP)
 
 #define GPIO206_GPIO            PIN_CFG(206, GPIO)
-#define GPIO206_MC4_DAT5        PIN_CFG_PULL(206, ALT_A, UP)
+#define GPIO206_MC4_DAT5        PIN_CFG_INPUT(206, ALT_A, PULLUP)
 
 #define GPIO207_GPIO            PIN_CFG(207, GPIO)
-#define GPIO207_MC4_DAT4        PIN_CFG_PULL(207, ALT_A, UP)
+#define GPIO207_MC4_DAT4        PIN_CFG_INPUT(207, ALT_A, PULLUP)
 
 #define GPIO208_GPIO            PIN_CFG(208, GPIO)
 #define GPIO208_MC1_CLK         PIN_CFG(208, ALT_A)
@@ -632,21 +632,25 @@
 #define GPIO215_MC1_CMDDIR      PIN_CFG(215, ALT_A)
 #define GPIO215_MC3_DAT2DIR     PIN_CFG(215, ALT_B)
 #define GPIO215_CLKOUT1         PIN_CFG(215, ALT_C)
+#define GPIO215_SPI2_TXD        PIN_CFG(215, ALT_C)
 
 #define GPIO216_GPIO            PIN_CFG(216, GPIO)
 #define GPIO216_MC1_DAT2DIR     PIN_CFG(216, ALT_A)
 #define GPIO216_MC3_CMDDIR      PIN_CFG(216, ALT_B)
-#define GPIO216_I2C3_SDA        PIN_CFG_PULL(216, ALT_C, UP)
+#define GPIO216_I2C3_SDA        PIN_CFG_INPUT(216, ALT_C, PULLUP)
+#define GPIO216_SPI2_FRM        PIN_CFG(216, ALT_C)
 
 #define GPIO217_GPIO            PIN_CFG(217, GPIO)
 #define GPIO217_MC1_DAT0DIR     PIN_CFG(217, ALT_A)
 #define GPIO217_MC3_DAT31DIR    PIN_CFG(217, ALT_B)
 #define GPIO217_CLKOUT2         PIN_CFG(217, ALT_C)
+#define GPIO217_SPI2_CLK        PIN_CFG(217, ALT_C)
 
 #define GPIO218_GPIO            PIN_CFG(218, GPIO)
 #define GPIO218_MC1_DAT31DIR    PIN_CFG(218, ALT_A)
 #define GPIO218_MC3_DAT0DIR     PIN_CFG(218, ALT_B)
-#define GPIO218_I2C3_SCL        PIN_CFG_PULL(218, ALT_C, UP)
+#define GPIO218_I2C3_SCL        PIN_CFG_INPUT(218, ALT_C, PULLUP)
+#define GPIO218_SPI2_RXD        PIN_CFG(218, ALT_C)
 
 #define GPIO219_GPIO            PIN_CFG(219, GPIO)
 #define GPIO219_HSIR_FLA0       PIN_CFG(219, ALT_A)
@@ -694,12 +698,12 @@
 #define GPIO229_GPIO            PIN_CFG(229, GPIO)
 #define GPIO229_CLKOUT1         PIN_CFG(229, ALT_A)
 #define GPIO229_PWL             PIN_CFG(229, ALT_B)
-#define GPIO229_I2C3_SDA        PIN_CFG_PULL(229, ALT_C, UP)
+#define GPIO229_I2C3_SDA        PIN_CFG_INPUT(229, ALT_C, PULLUP)
 
 #define GPIO230_GPIO            PIN_CFG(230, GPIO)
 #define GPIO230_CLKOUT2         PIN_CFG(230, ALT_A)
 #define GPIO230_PWL             PIN_CFG(230, ALT_B)
-#define GPIO230_I2C3_SCL        PIN_CFG_PULL(230, ALT_C, UP)
+#define GPIO230_I2C3_SCL        PIN_CFG_INPUT(230, ALT_C, PULLUP)
 
 #define GPIO256_GPIO            PIN_CFG(256, GPIO)
 #define GPIO256_USB_NXT         PIN_CFG(256, ALT_A)
diff --git a/arch/arm/plat-nomadik/include/plat/pincfg.h b/arch/arm/plat-nomadik/include/plat/pincfg.h
index 05a3936ae6d1..22cb97d2d8ad 100644
--- a/arch/arm/plat-nomadik/include/plat/pincfg.h
+++ b/arch/arm/plat-nomadik/include/plat/pincfg.h
@@ -37,7 +37,6 @@
  *                   SLPM value = same as normal
  *
  * PIN_CFG         - default config with alternate function
- * PIN_CFG_PULL    - default config with alternate function and pull up/down
  */
 
 typedef unsigned long pin_cfg_t;
@@ -133,10 +132,6 @@ typedef unsigned long pin_cfg_t;
         (PIN_CFG_DEFAULT |\
          (PIN_NUM(num) | PIN_##alt | PIN_OUTPUT_##val))
 
-#define PIN_CFG_PULL(num, alt, pull)    \
-        ((PIN_CFG_DEFAULT & ~PIN_PULL_MASK) |\
-         (PIN_NUM(num) | PIN_##alt | PIN_PULL_##pull))
-
 extern int nmk_config_pin(pin_cfg_t cfg, bool sleep);
 extern int nmk_config_pins(pin_cfg_t *cfgs, int num);
 extern int nmk_config_pins_sleep(pin_cfg_t *cfgs, int num);