PCI PM: Restore standard config registers of all devices early

There is a problem in our handling of suspend-resume of PCI devices that
many of them have their standard config registers restored with
interrupts enabled and they are put into the full power state with
interrupts enabled as well.  This may lead to the following scenario:
  * an interrupt vector is shared between two or more devices
  * one device is resumed earlier and generates an interrupt
  * the interrupt handler of another device tries to handle it and
    attempts to access the device the config space of which hasn't been
    restored yet and/or which still is in a low power state
  * the system crashes as a result

To prevent this from happening we should restore the standard
configuration registers of all devices with interrupts disabled and we
should put them into the D0 power state right after that.
Unfortunately, this cannot be done using the existing
pci_set_power_state(), because it can sleep.  Also, to do it we have to
make sure that the config spaces of all devices were actually saved
during suspend.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

4 files changed, 95 insertions, 70 deletions

diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index c697f2680856..9de07b75b993 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -355,17 +355,27 @@ static int pci_legacy_suspend(struct device *dev, pm_message_t state)
         int i = 0;
 
         if (drv && drv->suspend) {
+                pci_dev->state_saved = false;
+
                 i = drv->suspend(pci_dev, state);
                 suspend_report_result(drv->suspend, i);
-        } else {
-                pci_save_state(pci_dev);
-                /*
-                 * This is for compatibility with existing code with legacy PM
-                 * support.
-                 */
-                pci_pm_set_unknown_state(pci_dev);
+                if (i)
+                        return i;
+
+                if (pci_dev->state_saved)
+                        goto Fixup;
+
+                if (WARN_ON_ONCE(pci_dev->current_state != PCI_D0))
+                        goto Fixup;
         }
 
+        pci_save_state(pci_dev);
+        /*
+         * This is for compatibility with existing code with legacy PM support.
+         */
+        pci_pm_set_unknown_state(pci_dev);
+
+ Fixup:
         pci_fixup_device(pci_fixup_suspend, pci_dev);
 
         return i;
@@ -386,81 +396,34 @@ static int pci_legacy_suspend_late(struct device *dev, pm_message_t state)
 
 static int pci_legacy_resume_early(struct device *dev)
 {
-        int error = 0;
         struct pci_dev * pci_dev = to_pci_dev(dev);
         struct pci_driver * drv = pci_dev->driver;
 
-        pci_fixup_device(pci_fixup_resume_early, pci_dev);
-
-        if (drv && drv->resume_early)
-                error = drv->resume_early(pci_dev);
-        return error;
+        return drv && drv->resume_early ?
+                        drv->resume_early(pci_dev) : 0;
 }
 
 static int pci_legacy_resume(struct device *dev)
 {
-        int error;
         struct pci_dev * pci_dev = to_pci_dev(dev);
         struct pci_driver * drv = pci_dev->driver;
 
         pci_fixup_device(pci_fixup_resume, pci_dev);
 
-        if (drv && drv->resume) {
-                error = drv->resume(pci_dev);
-        } else {
-                /* restore the PCI config space */
-                pci_restore_state(pci_dev);
-                error = pci_pm_reenable_device(pci_dev);
-        }
-        return error;
+        return drv && drv->resume ?
+                        drv->resume(pci_dev) : pci_pm_reenable_device(pci_dev);
 }
 
 /* Auxiliary functions used by the new power management framework */
 
-static int pci_restore_standard_config(struct pci_dev *pci_dev)
-{
-        struct pci_dev *parent = pci_dev->bus->self;
-        int error = 0;
-
-        /* Check if the device's bus is operational */
-        if (!parent || parent->current_state == PCI_D0) {
-                pci_restore_state(pci_dev);
-                pci_update_current_state(pci_dev, PCI_D0);
-        } else {
-                dev_warn(&pci_dev->dev, "unable to restore config, "
-                        "bridge %s in low power state D%d\n", pci_name(parent),
-                        parent->current_state);
-                pci_dev->current_state = PCI_UNKNOWN;
-                error = -EAGAIN;
-        }
-
-        return error;
-}
-
-static bool pci_is_bridge(struct pci_dev *pci_dev)
-{
-        return !!(pci_dev->subordinate);
-}
-
 static void pci_pm_default_resume_noirq(struct pci_dev *pci_dev)
 {
-        if (pci_restore_standard_config(pci_dev))
-                pci_fixup_device(pci_fixup_resume_early, pci_dev);
+        pci_restore_standard_config(pci_dev);
+        pci_fixup_device(pci_fixup_resume_early, pci_dev);
 }
 
 static int pci_pm_default_resume(struct pci_dev *pci_dev)
 {
-        /*
-         * pci_restore_standard_config() should have been called once already,
-         * but it would have failed if the device's parent bridge had not been
-         * in power state D0 at that time.  Check it and try again if necessary.
-         */
-        if (pci_dev->current_state == PCI_UNKNOWN) {
-                int error = pci_restore_standard_config(pci_dev);
-                if (error)
-                        return error;
-        }
-
         pci_fixup_device(pci_fixup_resume, pci_dev);
 
         if (!pci_is_bridge(pci_dev))
@@ -575,11 +538,11 @@ static int pci_pm_resume_noirq(struct device *dev)
         struct device_driver *drv = dev->driver;
         int error = 0;
 
+        pci_pm_default_resume_noirq(pci_dev);
+
         if (pci_has_legacy_pm_support(pci_dev))
                 return pci_legacy_resume_early(dev);
 
-        pci_pm_default_resume_noirq(pci_dev);
-
         if (drv && drv->pm && drv->pm->resume_noirq)
                 error = drv->pm->resume_noirq(dev);
 
@@ -730,11 +693,11 @@ static int pci_pm_restore_noirq(struct device *dev)
         struct device_driver *drv = dev->driver;
         int error = 0;
 
+        pci_pm_default_resume_noirq(pci_dev);
+
         if (pci_has_legacy_pm_support(pci_dev))
                 return pci_legacy_resume_early(dev);
 
-        pci_pm_default_resume_noirq(pci_dev);
-
         if (drv && drv->pm && drv->pm->restore_noirq)
                 error = drv->pm->restore_noirq(dev);
 
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index e491fdedf705..17bd9325a245 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -22,7 +22,7 @@
 #include <asm/dma.h>    /* isa_dma_bridge_buggy */
 #include "pci.h"
 
-unsigned int pci_pm_d3_delay = 10;
+unsigned int pci_pm_d3_delay = PCI_PM_D3_WAIT;
 
 #ifdef CONFIG_PCI_DOMAINS
 int pci_domains_supported = 1;
@@ -426,6 +426,7 @@ static inline int platform_pci_sleep_wake(struct pci_dev *dev, bool enable)
  *                           given PCI device
  * @dev: PCI device to handle.
  * @state: PCI power state (D0, D1, D2, D3hot) to put the device into.
+ * @wait: If 'true', wait for the device to change its power state
  *
  * RETURN VALUE:
  * -EINVAL if the requested state is invalid.
@@ -435,7 +436,7 @@ static inline int platform_pci_sleep_wake(struct pci_dev *dev, bool enable)
  * 0 if device's power state has been successfully changed.
  */
 static int
-pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state)
+pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state, bool wait)
 {
         u16 pmcsr;
         bool need_restore = false;
@@ -480,8 +481,10 @@ pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state)
                 break;
         case PCI_UNKNOWN: /* Boot-up */
                 if ((pmcsr & PCI_PM_CTRL_STATE_MASK) == PCI_D3hot
-                 && !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET))
+                 && !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET)) {
                         need_restore = true;
+                        wait = true;
+                }
                 /* Fall-through: force to D0 */
         default:
                 pmcsr = 0;
@@ -491,12 +494,15 @@ pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state)
         /* enter specified state */
         pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pmcsr);
 
+        if (!wait)
+                return 0;
+
         /* Mandatory power management transition delays */
         /* see PCI PM 1.1 5.6.1 table 18 */
         if (state == PCI_D3hot || dev->current_state == PCI_D3hot)
                 msleep(pci_pm_d3_delay);
         else if (state == PCI_D2 || dev->current_state == PCI_D2)
-                udelay(200);
+                udelay(PCI_PM_D2_DELAY);
 
         dev->current_state = state;
 
@@ -515,7 +521,7 @@ pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state)
         if (need_restore)
                 pci_restore_bars(dev);
 
-        if (dev->bus->self)
+        if (wait && dev->bus->self)
                 pcie_aspm_pm_state_change(dev->bus->self);
 
         return 0;
@@ -585,7 +591,7 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
         if (state == PCI_D3hot && (dev->dev_flags & PCI_DEV_FLAGS_NO_D3))
                 return 0;
 
-        error = pci_raw_set_power_state(dev, state);
+        error = pci_raw_set_power_state(dev, state, true);
 
         if (state > PCI_D0 && platform_pci_power_manageable(dev)) {
                 /* Allow the platform to finalize the transition */
@@ -730,6 +736,7 @@ pci_save_state(struct pci_dev *dev)
         /* XXX: 100% dword access ok here? */
         for (i = 0; i < 16; i++)
                 pci_read_config_dword(dev, i * 4,&dev->saved_config_space[i]);
+        dev->state_saved = true;
         if ((i = pci_save_pcie_state(dev)) != 0)
                 return i;
         if ((i = pci_save_pcix_state(dev)) != 0)
@@ -1374,6 +1381,50 @@ void pci_allocate_cap_save_buffers(struct pci_dev *dev)
 }
 
 /**
+ * pci_restore_standard_config - restore standard config registers of PCI device
+ * @dev: PCI device to handle
+ *
+ * This function assumes that the device's configuration space is accessible.
+ * If the device needs to be powered up, the function will wait for it to
+ * change the state.
+ */
+int pci_restore_standard_config(struct pci_dev *dev)
+{
+        pci_power_t prev_state;
+        int error;
+
+        pci_restore_state(dev);
+        pci_update_current_state(dev, PCI_D0);
+
+        prev_state = dev->current_state;
+        if (prev_state == PCI_D0)
+                return 0;
+
+        error = pci_raw_set_power_state(dev, PCI_D0, false);
+        if (error)
+                return error;
+
+        if (pci_is_bridge(dev)) {
+                if (prev_state > PCI_D1)
+                        mdelay(PCI_PM_BUS_WAIT);
+        } else {
+                switch(prev_state) {
+                case PCI_D3cold:
+                case PCI_D3hot:
+                        mdelay(pci_pm_d3_delay);
+                        break;
+                case PCI_D2:
+                        udelay(PCI_PM_D2_DELAY);
+                        break;
+                }
+        }
+
+        dev->current_state = PCI_D0;
+
+        return 0;
+}
+
+/**
  * pci_enable_ari - enable ARI forwarding if hardware support it
  * @dev: the PCI device
  */
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 1351bb4addde..26ddf78ac300 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -49,6 +49,12 @@ extern void pci_disable_enabled_device(struct pci_dev *dev);
 extern void pci_pm_init(struct pci_dev *dev);
 extern void platform_pci_wakeup_init(struct pci_dev *dev);
 extern void pci_allocate_cap_save_buffers(struct pci_dev *dev);
+extern int pci_restore_standard_config(struct pci_dev *dev);
+
+static inline bool pci_is_bridge(struct pci_dev *pci_dev)
+{
+        return !!(pci_dev->subordinate);
+}
 
 extern int pci_user_read_config_byte(struct pci_dev *dev, int where, u8 *val);
 extern int pci_user_read_config_word(struct pci_dev *dev, int where, u16 *val);
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 80f8b8b65fde..48890cf3f96e 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -117,6 +117,10 @@ typedef int __bitwise pci_power_t;
 #define PCI_UNKNOWN     ((pci_power_t __force) 5)
 #define PCI_POWER_ERROR ((pci_power_t __force) -1)
 
+#define PCI_PM_D2_DELAY 200
+#define PCI_PM_D3_WAIT  10
+#define PCI_PM_BUS_WAIT 50
+
 /** The pci_channel state describes connectivity between the CPU and
  *  the pci device.  If some PCI bus between here and the pci device
  *  has crashed or locked up, this info is reflected here.
@@ -252,6 +256,7 @@ struct pci_dev {
         unsigned int    ari_enabled:1;  /* ARI forwarding */
         unsigned int    is_managed:1;
         unsigned int    is_pcie:1;
+        unsigned int    state_saved:1;
         pci_dev_flags_t dev_flags;
         atomic_t        enable_cnt;     /* pci_enable_device has been called */