/*
* poodle.c -- SoC audio for Poodle
*
* Copyright 2005 Wolfson Microelectronics PLC.
* Copyright 2005 Openedhand Ltd.
*
* Authors: Liam Girdwood <lrg@slimlogic.co.uk>
* Richard Purdie <richard@openedhand.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/timer.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/soc.h>
#include <sound/soc-dapm.h>
#include <asm/mach-types.h>
#include <asm/hardware/locomo.h>
#include <mach/poodle.h>
#include <mach/audio.h>
#include "../codecs/wm8731.h"
#include "pxa2xx-pcm.h"
#include "pxa2xx-i2s.h"
#define POODLE_HP 1
#define POODLE_HP_OFF 0
#define POODLE_SPK_ON 1
#define POODLE_SPK_OFF 0
/* audio clock in Hz - rounded from 12.235MHz */
#define POODLE_AUDIO_CLOCK 12288000
static int poodle_jack_func;
static int poodle_spk_func;
static void poodle_ext_control(struct snd_soc_codec *codec)
{
/* set up jack connection */
if (poodle_jack_func == POODLE_HP) {
/* set = unmute headphone */
locomo_gpio_write(&poodle_locomo_device.dev,
POODLE_LOCOMO_GPIO_MUTE_L, 1);
locomo_gpio_write(&poodle_locomo_device.dev,
POODLE_LOCOMO_GPIO_MUTE_R, 1);
snd_soc_dapm_enable_pin(codec, "Headphone Jack");
} else {
locomo_gpio_write(&poodle_locomo_device.dev,
POODLE_LOCOMO_GPIO_MUTE_L, 0);
locomo_gpio_write(&poodle_locomo_device.dev,
POODLE_LOCOMO_GPIO_MUTE_R, 0);
snd_soc_dapm_disable_pin(codec, "Headphone Jack");
}
/* set the enpoints to their new connetion states */
if (poodle_spk_func == POODLE_SPK_ON)
snd_soc_dapm_enable_pin(codec, "Ext Spk");
else
snd_soc_dapm_disable_pin(codec, "Ext Spk");
/* signal a DAPM event */
snd_soc_dapm_sync(codec);
}
static int poodle_startup(struct snd_pcm_substream *substream)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_codec *codec = rtd->socdev->card->codec;
/* check the jack status at stream startup */
poodle_ext_control(codec);
return 0;
}
/* we need to unmute the HP at shutdown as the mute burns power on poodle */
static void poodle_shutdown(struct snd_pcm_substream *substream)
{
/* set = unmute headphone */
locomo_gpio_write(&poodle_locomo_device.dev,
POODLE_LOCOMO_GPIO_MUTE_L, 1);
locomo_gpio_write(&poodle_locomo_device.dev,
POODLE_LOCOMO_GPIO_MUTE_R, 1);
}
static int poodle_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
unsigned int clk = 0;
int ret = 0;
switch (params_rate(params)) {
case 8000:
case 16000:
case 48000:
case 96000:
clk = 12288000;
break;
case 11025:
case 22050:
case 44100:
clk = 11289600;
break;
}
/* set codec DAI configuration */
ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
if (ret < 0)
return ret;
/* set cpu DAI configuration */
ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
if (ret < 0)
return ret;
/* set the codec system clock for DAC and ADC */
ret = snd_soc_dai_set_sysclk(codec_dai, WM8731_SYSCLK, clk,
SND_SOC_CLOCK_IN);
if (ret < 0)
return ret;
/* set the I2S system clock as input (unused) */
ret = snd_soc_dai_set_sysclk(cpu_dai, PXA2XX_I2S_SYSCLK, 0,
SND_SOC_CLOCK_IN);
if (ret < 0)
return ret;
return 0;
}
static struct snd_soc_ops poodle_ops = {
.startup = poodle_startup,
.hw_params = poodle_hw_params,
.shutdown = poodle_shutdown,
};
static int poodle_get_jack(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
ucontrol->value.integer.value[0] = poodle_jack_func;
return 0;
}
static int poodle_set_jack(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
if (poodle_jack_func == ucontrol->value.integer.value[0])
return 0;
poodle_jack_func = ucontrol->value.integer.value[0];
poodle_ext_control(codec);
return 1;
}
static int poodle_get_spk(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
ucontrol->value.integer.value[0] = poodle_spk_func;
return 0;
}
static int poodle_set_spk(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
if (poodle_spk_func == ucontrol->value.integer.value[0])
return 0;
poodle_spk_func = ucontrol->value.integer.value[0];
poodle_ext_control(codec);
return 1;
}
static int poodle_amp_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *k, int event)
{
if (SND_SOC_DAPM_EVENT_ON(event))
locomo_gpio_write(&poodle_locomo_device.dev,
POODLE_LOCOMO_GPIO_AMP_ON, 0);
else
locomo_gpio_write(&poodle_locomo_device.dev,
POODLE_LOCOMO_GPIO_AMP_ON, 1);
return 0;
}
/* poodle machine dapm widgets */
static const struct snd_soc_dapm_widget wm8731_dapm_widgets[] = {
SND_SOC_DAPM_HP("Headphone Jack", NULL),
SND_SOC_DAPM_SPK("Ext Spk", poodle_amp_event),
};
/* Corgi machine connections to the codec pins */
static const struct snd_soc_dapm_route audio_map[] = {
/* headphone connected to LHPOUT1, RHPOUT1 */
{"Headphone Jack", NULL, "LHPOUT"},
{"Headphone Jack", NULL, "RHPOUT"},
/* speaker connected to LOUT, ROUT */
{"Ext Spk", NULL, "ROUT"},
{"Ext Spk", NULL, "LOUT"},
};
static const char *jack_function[] = {"Off", "Headphone"};
static const char *spk_function[] = {"Off", "On"};
static const struct soc_enum poodle_enum[] = {
SOC_ENUM_SINGLE_EXT(2, jack_function),
SOC_ENUM_SINGLE_EXT(2, spk_function),
};
static const struct snd_kcontrol_new wm8731_poodle_controls[] = {
SOC_ENUM_EXT("Jack Function", poodle_enum[0], poodle_get_jack,
poodle_set_jack),
SOC_ENUM_EXT("Speaker Function", poodle_enum[1], poodle_get_spk,
poodle_set_spk),
};
/*
* Logic for a wm8731 as connected on a Sharp SL-C7x0 Device
*/
static int poodle_wm8731_init(struct snd_soc_codec *codec)
{
int err;
snd_soc_dapm_nc_pin(codec, "LLINEIN");
snd_soc_dapm_nc_pin(codec, "RLINEIN");
snd_soc_dapm_enable_pin(codec, "MICIN");
/* Add poodle specific controls */
err = snd_soc_add_controls(codec, wm8731_poodle_controls,
ARRAY_SIZE(wm8731_poodle_controls));
if (err < 0)
return err;
/* Add poodle specific widgets */
snd_soc_dapm_new_controls(codec, wm8731_dapm_widgets,
ARRAY_SIZE(wm8731_dapm_widgets));
/* Set up poodle specific audio path audio_map */
snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
snd_soc_dapm_sync(codec);
return 0;
}
/* poodle digital audio interface glue - connects codec <--> CPU */
static struct snd_soc_dai_link poodle_dai = {
.name = "WM8731",
.stream_name = "WM8731",
.cpu_dai = &pxa_i2s_dai,
.codec_dai = &wm8731_dai,
.init = poodle_wm8731_init,
.ops = &poodle_ops,
};
/* poodle audio machine driver */
static struct snd_soc_card snd_soc_poodle = {
.name = "Poodle",
.platform = &pxa2xx_soc_platform,
.dai_link = &poodle_dai,
.num_links = 1,
};
/*
* FIXME: This is a temporary bodge to avoid cross-tree merge issues.
* New drivers should register the wm8731 I2C device in the machine
* setup code (under arch/arm for ARM systems).
*/
static int wm8731_i2c_register(void)
{
struct i2c_board_info info;
struct i2c_adapter *adapter;
struct i2c_client *client;
memset(&info, 0, sizeof(struct i2c_board_info));
info.addr = 0x1b;
strlcpy(info.type, "wm8731", I2C_NAME_SIZE);
adapter = i2c_get_adapter(0);
if (!adapter) {
printk(KERN_ERR "can't get i2c adapter 0\n");
return -ENODEV;
}
client = i2c_new_device(adapter, &info);
i2c_put_adapter(adapter);
if (!client) {
printk(KERN_ERR "can't add i2c device at 0x%x\n",
(unsigned int)info.addr);
return -ENODEV;
}
return 0;
}
/* poodle audio subsystem */
static struct snd_soc_device poodle_snd_devdata = {
.card = &snd_soc_poodle,
.codec_dev = &soc_codec_dev_wm8731,
};
static struct platform_device *poodle_snd_device;
static int __init poodle_init(void)
{
int ret;
if (!machine_is_poodle())
return -ENODEV;
ret = wm8731_i2c_register();
if (ret != 0)
return ret;
locomo_gpio_set_dir(&poodle_locomo_device.dev,
POODLE_LOCOMO_GPIO_AMP_ON, 0);
/* should we mute HP at startup - burning power ?*/
locomo_gpio_set_dir(&poodle_locomo_device.dev,
POODLE_LOCOMO_GPIO_MUTE_L, 0);
locomo_gpio_set_dir(&poodle_locomo_device.dev,
POODLE_LOCOMO_GPIO_MUTE_R, 0);
poodle_snd_device = platform_device_alloc("soc-audio", -1);
if (!poodle_snd_device)
return -ENOMEM;
platform_set_drvdata(poodle_snd_device, &poodle_snd_devdata);
poodle_snd_devdata.dev = &poodle_snd_device->dev;
ret = platform_device_add(poodle_snd_device);
if (ret)
platform_device_put(poodle_snd_device);
return ret;
}
static void __exit poodle_exit(void)
{
platform_device_unregister(poodle_snd_device);
}
module_init(poodle_init);
module_exit(poodle_exit);
/* Module information */
MODULE_AUTHOR("Richard Purdie");
MODULE_DESCRIPTION("ALSA SoC Poodle");
MODULE_LICENSE("GPL");
