/*
* sound/opl3sa2.c
*
* A low level driver for Yamaha OPL3-SA2 and SA3 cards.
* NOTE: All traces of the name OPL3-SAx have now (December 2000) been
* removed from the driver code, as an email exchange with Yamaha
* provided the information that the YMF-719 is indeed just a
* re-badged 715.
*
* Copyright 1998-2001 Scott Murray <scott@spiteful.org>
*
* Originally based on the CS4232 driver (in cs4232.c) by Hannu Savolainen
* and others. Now incorporates code/ideas from pss.c, also by Hannu
* Savolainen. Both of those files are distributed with the following
* license:
*
* "Copyright (C) by Hannu Savolainen 1993-1997
*
* OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
* Version 2 (June 1991). See the "COPYING" file distributed with this software
* for more info."
*
* As such, in accordance with the above license, this file, opl3sa2.c, is
* distributed under the GNU GENERAL PUBLIC LICENSE (GPL) Version 2 (June 1991).
* See the "COPYING" file distributed with this software for more information.
*
* Change History
* --------------
* Scott Murray Original driver (Jun 14, 1998)
* Paul J.Y. Lahaie Changed probing / attach code order
* Scott Murray Added mixer support (Dec 03, 1998)
* Scott Murray Changed detection code to be more forgiving,
* added force option as last resort,
* fixed ioctl return values. (Dec 30, 1998)
* Scott Murray Simpler detection code should work all the time now
* (with thanks to Ben Hutchings for the heuristic),
* removed now unnecessary force option. (Jan 5, 1999)
* Christoph Hellwig Adapted to module_init/module_exit (Mar 4, 2000)
* Scott Murray Reworked SA2 versus SA3 mixer code, updated chipset
* version detection code (again!). (Dec 5, 2000)
* Scott Murray Adjusted master volume mixer scaling. (Dec 6, 2000)
* Scott Murray Based on a patch by Joel Yliluoma (aka Bisqwit),
* integrated wide mixer and adjusted mic, bass, treble
* scaling. (Dec 6, 2000)
* Scott Murray Based on a patch by Peter Englmaier, integrated
* ymode and loopback options. (Dec 6, 2000)
* Scott Murray Inspired by a patch by Peter Englmaier, and based on
* what ALSA does, added initialization code for the
* default DMA and IRQ settings. (Dec 6, 2000)
* Scott Murray Added some more checks to the card detection code,
* based on what ALSA does. (Dec 12, 2000)
* Scott Murray Inspired by similar patches from John Fremlin,
* Jim Radford, Mike Rolig, and Ingmar Steen, added 2.4
* ISA PnP API support, mainly based on bits from
* sb_card.c and awe_wave.c. (Dec 12, 2000)
* Scott Murray Some small cleanups to the init code output.
* (Jan 7, 2001)
* Zwane Mwaikambo Added PM support. (Dec 4 2001)
*
* Adam Belay Converted driver to new PnP Layer (Oct 12, 2002)
* Zwane Mwaikambo Code, data structure cleanups. (Feb 15 2002)
* Zwane Mwaikambo Free resources during auxiliary device probe
* failures (Apr 29 2002)
*
*/
#include <linux/config.h>
#include <linux/pnp.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/delay.h>
#include "sound_config.h"
#include "ad1848.h"
#include "mpu401.h"
#define OPL3SA2_MODULE_NAME "opl3sa2"
#define PFX OPL3SA2_MODULE_NAME ": "
/* Useful control port indexes: */
#define OPL3SA2_PM 0x01
#define OPL3SA2_SYS_CTRL 0x02
#define OPL3SA2_IRQ_CONFIG 0x03
#define OPL3SA2_DMA_CONFIG 0x06
#define OPL3SA2_MASTER_LEFT 0x07
#define OPL3SA2_MASTER_RIGHT 0x08
#define OPL3SA2_MIC 0x09
#define OPL3SA2_MISC 0x0A
#define OPL3SA3_WIDE 0x14
#define OPL3SA3_BASS 0x15
#define OPL3SA3_TREBLE 0x16
/* Useful constants: */
#define DEFAULT_VOLUME 50
#define DEFAULT_MIC 50
#define DEFAULT_TIMBRE 0
/* Power saving modes */
#define OPL3SA2_PM_MODE0 0x00
#define OPL3SA2_PM_MODE1 0x04 /* PSV */
#define OPL3SA2_PM_MODE2 0x05 /* PSV | PDX */
#define OPL3SA2_PM_MODE3 0x27 /* ADOWN | PSV | PDN | PDX */
/* For checking against what the card returns: */
#define VERSION_UNKNOWN 0
#define VERSION_YMF711 1
#define VERSION_YMF715 2
#define VERSION_YMF715B 3
#define VERSION_YMF715E 4
/* also assuming that anything > 4 but <= 7 is a 715E */
/* Chipset type constants for use below */
#define CHIPSET_UNKNOWN -1
#define CHIPSET_OPL3SA2 0
#define CHIPSET_OPL3SA3 1
static const char *CHIPSET_TABLE[] = {"OPL3-SA2", "OPL3-SA3"};
#ifdef CONFIG_PNP
#define OPL3SA2_CARDS_MAX 4
#else
#define OPL3SA2_CARDS_MAX 1
#endif
/* This should be pretty obvious */
static int opl3sa2_cards_num;
typedef struct {
/* device resources */
unsigned short cfg_port;
struct address_info cfg;
struct address_info cfg_mss;
struct address_info cfg_mpu;
#ifdef CONFIG_PNP
/* PnP Stuff */
struct pnp_dev* pdev;
int activated; /* Whether said devices have been activated */
#endif
unsigned int card;
int chipset; /* What's my version(s)? */
char *chipset_name;
/* mixer data */
int mixer;
unsigned int volume_l;
unsigned int volume_r;
unsigned int mic;
unsigned int bass_l;
unsigned int bass_r;
unsigned int treble_l;
unsigned int treble_r;
unsigned int wide_l;
unsigned int wide_r;
} opl3sa2_state_t;
static opl3sa2_state_t opl3sa2_state[OPL3SA2_CARDS_MAX];
/* Our parameters */
static int __initdata io = -1;
static int __initdata mss_io = -1;
static int __initdata mpu_io = -1;
static int __initdata irq = -1;
static int __initdata dma = -1;
static int __initdata dma2 = -1;
static int __initdata ymode = -1;
static int __initdata loopback = -1;
#ifdef CONFIG_PNP
/* PnP specific parameters */
static int __initdata isapnp = 1;
static int __initdata multiple = 1;
/* Whether said devices have been activated */
static int opl3sa2_activated[OPL3SA2_CARDS_MAX];
#else
static int __initdata isapnp; /* = 0 */
static int __initdata multiple; /* = 0 */
#endif
MODULE_DESCRIPTION("Module for OPL3-SA2 and SA3 sound cards (uses AD1848 MSS driver).");
MODULE_AUTHOR("Scott Murray <scott@spiteful.org>");
MODULE_LICENSE("GPL");
module_param(io, int, 0);
MODULE_PARM_DESC(io, "Set I/O base of OPL3-SA2 or SA3 card (usually 0x370. Address must be even and must be from 0x100 to 0xFFE)");
module_param(mss_io, int, 0);
MODULE_PARM_DESC(mss_io, "Set MSS (audio) I/O base (0x530, 0xE80, or other. Address must end in 0 or 4 and must be from 0x530 to 0xF48)");
module_param(mpu_io, int, 0);
MODULE_PARM_DESC(mpu_io, "Set MIDI I/O base (0x330 or other. Address must be even and must be from 0x300 to 0x334)");
module_param(irq, int, 0);
MODULE_PARM_DESC(irq, "Set MSS (audio) IRQ (5, 7, 9, 10, 11, 12)");
module_param(dma, int, 0);
MODULE_PARM_DESC(dma, "Set MSS (audio) first DMA channel (0, 1, 3)");
module_param(dma2, int, 0);
MODULE_PARM_DESC(dma2, "Set MSS (audio) second DMA channel (0, 1, 3)");
module_param(ymode, int, 0);
MODULE_PARM_DESC(ymode, "Set Yamaha 3D enhancement mode (0 = Desktop/Normal, 1 = Notebook PC (1), 2 = Notebook PC (2), 3 = Hi-Fi)");
module_param(loopback, int, 0);
MODULE_PARM_DESC(loopback, "Set A/D input source. Useful for echo cancellation (0 = Mic Rch (default), 1 = Mono output loopback)");
#ifdef CONFIG_PNP
module_param(isapnp, bool, 0);
MODULE_PARM_DESC(isapnp, "When set to 0, ISA PnP support will be disabled");
module_param(multiple, bool, 0);
MODULE_PARM_DESC(multiple, "When set to 0, will not search for multiple cards");
#endif
/*
* Standard read and write functions
*/
static inline void opl3sa2_write(unsigned short port,
unsigned char index,
unsigned char data)
{
outb_p(index, port);
outb(data, port + 1);
}
static inline void opl3sa2_read(unsigned short port,
unsigned char index,
unsigned char* data)
{
outb_p(index, port);
*data = inb(port + 1);
}
/*
* All of the mixer functions...
*/
static void opl3sa2_set_volume(opl3sa2_state_t* devc, int left, int right)
{
static unsigned char scale[101] = {
0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0e, 0x0e, 0x0e,
0x0e, 0x0e, 0x0e, 0x0d, 0x0d, 0x0d, 0x0d, 0x0d, 0x0d, 0x0c,
0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0b, 0x0b, 0x0b, 0x0b,
0x0b, 0x0b, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x09, 0x09,
0x09, 0x09, 0x09, 0x09, 0x09, 0x08, 0x08, 0x08, 0x08, 0x08,
0x08, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x06, 0x06, 0x06,
0x06, 0x06, 0x06, 0x06, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05,
0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x03, 0x03, 0x03, 0x03,
0x03, 0x03, 0x03, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x01,
0x01, 0x01, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00
};
unsigned char vol;
vol = scale[left];
/* If level is zero, turn on mute */
if(!left)
vol |= 0x80;
opl3sa2_write(devc->cfg_port, OPL3SA2_MASTER_LEFT, vol);
vol = scale[right];
/* If level is zero, turn on mute */
if(!right)
vol |= 0x80;
opl3sa2_write(devc->cfg_port, OPL3SA2_MASTER_RIGHT, vol);
}
static void opl3sa2_set_mic(opl3sa2_state_t* devc, int level)
{
unsigned char vol = 0x1F;
if((level >= 0) && (level <= 100))
vol = 0x1F - (unsigned char) (32 * level / 101);
/* If level is zero, turn on mute */
if(!level)
vol |= 0x80;
opl3sa2_write(devc->cfg_port, OPL3SA2_MIC, vol);
}
static void opl3sa3_set_bass(opl3sa2_state_t* devc, int left, int right)
{
unsigned char bass;
bass = left ? ((unsigned char) (8 * left / 101)) : 0;
bass |= (right ? ((unsigned char) (8 * right / 101)) : 0) << 4;
opl3sa2_write(devc->cfg_port, OPL3SA3_BASS, bass);
}
static void opl3sa3_set_treble(opl3sa2_state_t* devc, int left, int right)
{
unsigned char treble;
treble = left ? ((unsigned char) (8 * left / 101)) : 0;
treble |= (right ? ((unsigned char) (8 * right / 101)) : 0) << 4;
opl3sa2_write(devc->cfg_port, OPL3SA3_TREBLE, treble);
}
static void opl3sa2_mixer_reset(opl3sa2_state_t* devc)
{
if (devc) {
opl3sa2_set_volume(devc, DEFAULT_VOLUME, DEFAULT_VOLUME);
devc->volume_l = devc->volume_r = DEFAULT_VOLUME;
opl3sa2_set_mic(devc, DEFAULT_MIC);
devc->mic = DEFAULT_MIC;
if (devc->chipset == CHIPSET_OPL3SA3) {
opl3sa3_set_bass(devc, DEFAULT_TIMBRE, DEFAULT_TIMBRE);
devc->bass_l = devc->bass_r = DEFAULT_TIMBRE;
opl3sa3_set_treble(devc, DEFAULT_TIMBRE, DEFAULT_TIMBRE);
devc->treble_l = devc->treble_r = DEFAULT_TIMBRE;
}
}
}
static inline void arg_to_vol_mono(unsigned int vol, int* value)
{
int left;
left = vol & 0x00ff;
if (left > 100)
left = 100;
*value = left;
}
static inline void arg_to_vol_stereo(unsigned int vol, int* aleft, int* aright)
{
arg_to_vol_mono(vol, aleft);
arg_to_vol_mono(vol >> 8, aright);
}
static inline int ret_vol_mono(int vol)
{
return ((vol << 8) | vol);
}
static inline int ret_vol_stereo(int left, int right)
{
return ((right << 8) | left);
}
static int opl3sa2_mixer_ioctl(int dev, unsigned int cmd, void __user *arg)
{
int retval, value, cmdf = cmd & 0xff;
int __user *p = (int __user *)arg;
opl3sa2_state_t* devc = &opl3sa2_state[dev];
switch (cmdf) {
case SOUND_MIXER_VOLUME:
case SOUND_MIXER_MIC:
case SOUND_MIXER_DEVMASK:
case SOUND_MIXER_STEREODEVS:
case SOUND_MIXER_RECMASK:
case SOUND_MIXER_RECSRC:
case SOUND_MIXER_CAPS:
break;
default:
return -EINVAL;
}
if (((cmd >> 8) & 0xff) != 'M')
return -EINVAL;
retval = 0;
if (_SIOC_DIR (cmd) & _SIOC_WRITE) {
switch (cmdf) {
case SOUND_MIXER_VOLUME:
retval = get_user(value, (unsigned __user *) arg);
if (retval)
break;
arg_to_vol_stereo(value, &devc->volume_l, &devc->volume_r);
opl3sa2_set_volume(devc, devc->volume_l, devc->volume_r);
value = ret_vol_stereo(devc->volume_l, devc->volume_r);
retval = put_user(value, p);
break;
case SOUND_MIXER_MIC:
retval = get_user(value, (unsigned __user *) arg);
if (retval)
break;
arg_to_vol_mono(value, &devc->mic);
opl3sa2_set_mic(devc, devc->mic);
value = ret_vol_mono(devc->mic);
retval = put_user(value, p);
break;
default:
retval = -EINVAL;
}
}
else {
/*
* Return parameters
*/
switch (cmdf) {
case SOUND_MIXER_DEVMASK:
retval = put_user(SOUND_MASK_VOLUME | SOUND_MASK_MIC, p);
break;
case SOUND_MIXER_STEREODEVS:
retval = put_user(SOUND_MASK_VOLUME, p);
break;
case SOUND_MIXER_RECMASK:
/* No recording devices */
retval = put_user(0, p);
break;
case SOUND_MIXER_CAPS:
retval = put_user(SOUND_CAP_EXCL_INPUT, p);
break;
case SOUND_MIXER_RECSRC:
/* No recording source */
retval = put_user(0, p);
break;
case SOUND_MIXER_VOLUME:
value = ret_vol_stereo(devc->volume_l, devc->volume_r);
retval = put_user(value, p);
break;
case SOUND_MIXER_MIC:
value = ret_vol_mono(devc->mic);
put_user(value, p);
break;
default:
retval = -EINVAL;
}
}
return retval;
}
/* opl3sa2_mixer_ioctl end */
static int opl3sa3_mixer_ioctl(int dev, unsigned int cmd, void __user * arg)
{
int value, retval, cmdf = cmd & 0xff;
opl3sa2_state_t* devc = &opl3sa2_state[dev];
switch (cmdf) {
case SOUND_MIXER_BASS:
value = ret_vol_stereo(devc->bass_l, devc->bass_r);
retval = put_user(value, (int __user *) arg);
break;
case SOUND_MIXER_TREBLE:
value = ret_vol_stereo(devc->treble_l, devc->treble_r);
retval = put_user(value, (int __user *) arg);
break;
case SOUND_MIXER_DIGITAL1:
value = ret_vol_stereo(devc->wide_l, devc->wide_r);
retval = put_user(value, (int __user *) arg);
break;
default:
retval = -EINVAL;
}
return retval;
}
/* opl3sa3_mixer_ioctl end */
static struct mixer_operations opl3sa2_mixer_operations =
{
.owner = THIS_MODULE,
.id = "OPL3-SA2",
.name = "Yamaha OPL3-SA2",
.ioctl = opl3sa2_mixer_ioctl
};
static struct mixer_operations opl3sa3_mixer_operations =
{
.owner = THIS_MODULE,
.id = "OPL3-SA3",
.name = "Yamaha OPL3-SA3",
.ioctl = opl3sa3_mixer_ioctl
};
/* End of mixer-related stuff */
/*
* Component probe, attach, unload functions
*/
static inline void __exit unload_opl3sa2_mpu(struct address_info *hw_config)
{
unload_mpu401(hw_config);
}
static void __init attach_opl3sa2_mss(struct address_info* hw_config, struct resource *ports)
{
int initial_mixers;
initial_mixers = num_mixers;
attach_ms_sound(hw_config, ports, THIS_MODULE); /* Slot 0 */
if (hw_config->slots[0] != -1) {
/* Did the MSS driver install? */
if(num_mixers == (initial_mixers + 1)) {
/* The MSS mixer is installed, reroute mixers appropriately */
AD1848_REROUTE(SOUND_MIXER_LINE1, SOUND_MIXER_CD);
AD1848_REROUTE(SOUND_MIXER_LINE2, SOUND_MIXER_SYNTH);
AD1848_REROUTE(SOUND_MIXER_LINE3, SOUND_MIXER_LINE);
}
else {
printk(KERN_ERR PFX "MSS mixer not installed?\n");
}
}
}
static inline void __exit unload_opl3sa2_mss(struct address_info* hw_config)
{
unload_ms_sound(hw_config);
}
static int __init probe_opl3sa2(struct address_info* hw_config, int card)
{
unsigned char misc;
unsigned char tmp;
unsigned char version;
/*
* Try and allocate our I/O port range.
*/
if (!request_region(hw_config->io_base, 2, OPL3SA2_MODULE_NAME)) {
printk(KERN_ERR PFX "Control I/O port %#x not free\n",
hw_config->io_base);
goto out_nodev;
}
/*
* Check if writing to the read-only version bits of the miscellaneous
* register succeeds or not (it should not).
*/
opl3sa2_read(hw_config->io_base, OPL3SA2_MISC, &misc);
opl3sa2_write(hw_config->io_base, OPL3SA2_MISC, misc ^ 0x07);
opl3sa2_read(hw_config->io_base, OPL3SA2_MISC, &tmp);
if(tmp != misc) {
printk(KERN_ERR PFX "Control I/O port %#x is not a YMF7xx chipset!\n",
hw_config->io_base);
goto out_region;
}
/*
* Check if the MIC register is accessible.
*/
opl3sa2_read(hw_config->io_base, OPL3SA2_MIC, &tmp);
opl3sa2_write(hw_config->io_base, OPL3SA2_MIC, 0x8a);
opl3sa2_read(hw_config->io_base, OPL3SA2_MIC, &tmp);
if((tmp & 0x9f) != 0x8a) {
printk(KERN_ERR
PFX "Control I/O port %#x is not a YMF7xx chipset!\n",
hw_config->io_base);
goto out_region;
}
opl3sa2_write(hw_config->io_base, OPL3SA2_MIC, tmp);
/*
* Determine chipset type (SA2 or SA3)
*
* This is done by looking at the chipset version in the lower 3 bits
* of the miscellaneous register.
*/
version = misc & 0x07;
printk(KERN_DEBUG PFX "Chipset version = %#x\n", version);
switch (version) {
case 0:
opl3sa2_state[card].chipset = CHIPSET_UNKNOWN;
printk(KERN_ERR
PFX "Unknown Yamaha audio controller version\n");
break;
case VERSION_YMF711:
opl3sa2_state[card].chipset = CHIPSET_OPL3SA2;
printk(KERN_INFO PFX "Found OPL3-SA2 (YMF711)\n");
break;
case VERSION_YMF715:
opl3sa2_state[card].chipset = CHIPSET_OPL3SA3;
printk(KERN_INFO
PFX "Found OPL3-SA3 (YMF715 or YMF719)\n");
break;
case VERSION_YMF715B:
opl3sa2_state[card].chipset = CHIPSET_OPL3SA3;
printk(KERN_INFO
PFX "Found OPL3-SA3 (YMF715B or YMF719B)\n");
break;
case VERSION_YMF715E:
default:
opl3sa2_state[card].chipset = CHIPSET_OPL3SA3;
printk(KERN_INFO
PFX "Found OPL3-SA3 (YMF715E or YMF719E)\n");
break;
}
if (opl3sa2_state[card].chipset != CHIPSET_UNKNOWN) {
/* Generate a pretty name */
opl3sa2_state[card].chipset_name = (char *)CHIPSET_TABLE[opl3sa2_state[card].chipset];
return 0;
}
out_region:
release_region(hw_config->io_base, 2);
out_nodev:
return -ENODEV;
}
static void __init attach_opl3sa2(struct address_info* hw_config, int card)
{
/* Initialize IRQ configuration to IRQ-B: -, IRQ-A: WSS+MPU+OPL3 */
opl3sa2_write(hw_config->io_base, OPL3SA2_IRQ_CONFIG, 0x0d);
/* Initialize DMA configuration */
if(hw_config->dma2 == hw_config->dma) {
/* Want DMA configuration DMA-B: -, DMA-A: WSS-P+WSS-R */
opl3sa2_write(hw_config->io_base, OPL3SA2_DMA_CONFIG, 0x03);
}
else {
/* Want DMA configuration DMA-B: WSS-R, DMA-A: WSS-P */
opl3sa2_write(hw_config->io_base, OPL3SA2_DMA_CONFIG, 0x21);
}
}
static void __init attach_opl3sa2_mixer(struct address_info *hw_config, int card)
{
struct mixer_operations* mixer_operations;
opl3sa2_state_t* devc = &opl3sa2_state[card];
/* Install master mixer */
if (devc->chipset == CHIPSET_OPL3SA3) {
mixer_operations = &opl3sa3_mixer_operations;
}
else {
mixer_operations = &opl3sa2_mixer_operations;
}
devc->cfg_port = hw_config->io_base;
devc->mixer = sound_install_mixer(MIXER_DRIVER_VERSION,
mixer_operations->name,
mixer_operations,
sizeof(struct mixer_operations),
devc);
if(devc->mixer < 0) {
printk(KERN_ERR PFX "Could not install %s master mixer\n",
mixer_operations->name);
}
else {
opl3sa2_mixer_reset(devc);
}
}
static void opl3sa2_clear_slots(struct address_info* hw_config)
{
int i;
for(i = 0; i < 6; i++) {
hw_config->slots[i] = -1;
}
}
static void __init opl3sa2_set_ymode(struct address_info* hw_config, int ymode)
{
/*
* Set the Yamaha 3D enhancement mode (aka Ymersion) if asked to and
* it's supported.
*
* 0: Desktop (aka normal) 5-12 cm speakers
* 1: Notebook PC mode 1 3 cm speakers
* 2: Notebook PC mode 2 1.5 cm speakers
* 3: Hi-fi 16-38 cm speakers
*/
if(ymode >= 0 && ymode <= 3) {
unsigned char sys_ctrl;
opl3sa2_read(hw_config->io_base, OPL3SA2_SYS_CTRL, &sys_ctrl);
sys_ctrl = (sys_ctrl & 0xcf) | ((ymode & 3) << 4);
opl3sa2_write(hw_config->io_base, OPL3SA2_SYS_CTRL, sys_ctrl);
}
else {
printk(KERN_ERR PFX "not setting ymode, it must be one of 0,1,2,3\n");
}
}
static void __init opl3sa2_set_loopback(struct address_info* hw_config, int loopback)
{
if(loopback >= 0 && loopback <= 1) {
unsigned char misc;
opl3sa2_read(hw_config->io_base, OPL3SA2_MISC, &misc);
misc = (misc & 0xef) | ((loopback & 1) << 4);
opl3sa2_write(hw_config->io_base, OPL3SA2_MISC, misc);
}
else {
printk(KERN_ERR PFX "not setting loopback, it must be either 0 or 1\n");
}
}
static void __exit unload_opl3sa2(struct address_info* hw_config, int card)
{
/* Release control ports */
release_region(hw_config->io_base, 2);
/* Unload mixer */
if(opl3sa2_state[card].mixer >= 0)
sound_unload_mixerdev(opl3sa2_state[card].mixer);
}
#ifdef CONFIG_PNP
static struct pnp_device_id pnp_opl3sa2_list[] = {
{.id = "YMH0021", .driver_data = 0},
{.id = ""}
};
MODULE_DEVICE_TABLE(pnp, pnp_opl3sa2_list);
static int opl3sa2_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
{
int card = opl3sa2_cards_num;
/* we don't actually want to return an error as the user may have specified
* no multiple card search
*/
if (opl3sa2_cards_num == OPL3SA2_CARDS_MAX)
return 0;
opl3sa2_activated[card] = 1;
/* Our own config: */
opl3sa2_state[card].cfg.io_base = pnp_port_start(dev, 4);
opl3sa2_state[card].cfg.irq = pnp_irq(dev, 0);
opl3sa2_state[card].cfg.dma = pnp_dma(dev, 0);
opl3sa2_state[card].cfg.dma2 = pnp_dma(dev, 1);
/* The MSS config: */
opl3sa2_state[card].cfg_mss.io_base = pnp_port_start(dev, 1);
opl3sa2_state[card].cfg_mss.irq = pnp_irq(dev, 0);
opl3sa2_state[card].cfg_mss.dma = pnp_dma(dev, 0);
opl3sa2_state[card].cfg_mss.dma2 = pnp_dma(dev, 1);
opl3sa2_state[card].cfg_mss.card_subtype = 1; /* No IRQ or DMA setup */
opl3sa2_state[card].cfg_mpu.io_base = pnp_port_start(dev, 3);
opl3sa2_state[card].cfg_mpu.irq = pnp_irq(dev, 0);
opl3sa2_state[card].cfg_mpu.dma = -1;
opl3sa2_state[card].cfg_mpu.dma2 = -1;
opl3sa2_state[card].cfg_mpu.always_detect = 1; /* It's there, so use shared IRQs */
/* Call me paranoid: */
opl3sa2_clear_slots(&opl3sa2_state[card].cfg);
opl3sa2_clear_slots(&opl3sa2_state[card].cfg_mss);
opl3sa2_clear_slots(&opl3sa2_state[card].cfg_mpu);
opl3sa2_state[card].pdev = dev;
opl3sa2_cards_num++;
return 0;
}
static struct pnp_driver opl3sa2_driver = {
.name = "opl3sa2",
.id_table = pnp_opl3sa2_list,
.probe = opl3sa2_pnp_probe,
};
#endif /* CONFIG_PNP */
/* End of component functions */
/*
* Install OPL3-SA2 based card(s).
*
* Need to have ad1848 and mpu401 loaded ready.
*/
static int __init init_opl3sa2(void)
{
int card, max;
/* Sanitize isapnp and multiple settings */
isapnp = isapnp != 0 ? 1 : 0;
multiple = multiple != 0 ? 1 : 0;
max = (multiple && isapnp) ? OPL3SA2_CARDS_MAX : 1;
#ifdef CONFIG_PNP
if (isapnp){
pnp_register_driver(&opl3sa2_driver);
if(!opl3sa2_cards_num){
printk(KERN_INFO PFX "No PnP cards found\n");
isapnp = 0;
}
max = opl3sa2_cards_num;
}
#endif
for (card = 0; card < max; card++) {
/* If a user wants an I/O then assume they meant it */
struct resource *ports;
int base;
if (!isapnp) {
if (io == -1 || irq == -1 || dma == -1 ||
dma2 == -1 || mss_io == -1) {
printk(KERN_ERR
PFX "io, mss_io, irq, dma, and dma2 must be set\n");
return -EINVAL;
}
opl3sa2_cards_num++;
/*
* Our own config:
* (NOTE: IRQ and DMA aren't used, so they're set to
* give pretty output from conf_printf. :)
*/
opl3sa2_state[card].cfg.io_base = io;
opl3sa2_state[card].cfg.irq = irq;
opl3sa2_state[card].cfg.dma = dma;
opl3sa2_state[card].cfg.dma2 = dma2;
/* The MSS config: */
opl3sa2_state[card].cfg_mss.io_base = mss_io;
opl3sa2_state[card].cfg_mss.irq = irq;
opl3sa2_state[card].cfg_mss.dma = dma;
opl3sa2_state[card].cfg_mss.dma2 = dma2;
opl3sa2_state[card].cfg_mss.card_subtype = 1; /* No IRQ or DMA setup */
opl3sa2_state[card].cfg_mpu.io_base = mpu_io;
opl3sa2_state[card].cfg_mpu.irq = irq;
opl3sa2_state[card].cfg_mpu.dma = -1;
opl3sa2_state[card].cfg_mpu.always_detect = 1; /* Use shared IRQs */
/* Call me paranoid: */
opl3sa2_clear_slots(&opl3sa2_state[card].cfg);
opl3sa2_clear_slots(&opl3sa2_state[card].cfg_mss);
opl3sa2_clear_slots(&opl3sa2_state[card].cfg_mpu);
}
/* FIXME: leak */
if (probe_opl3sa2(&opl3sa2_state[card].cfg, card))
return -ENODEV;
base = opl3sa2_state[card].cfg_mss.io_base;
if (!request_region(base, 4, "WSS config"))
goto failed;
ports = request_region(base + 4, 4, "ad1848");
if (!ports)
goto failed2;
if (!probe_ms_sound(&opl3sa2_state[card].cfg_mss, ports)) {
/*
* If one or more cards are already registered, don't
* return an error but print a warning. Note, this
* should never really happen unless the hardware or
* ISA PnP screwed up.
*/
release_region(base + 4, 4);
failed2:
release_region(base, 4);
failed:
release_region(opl3sa2_state[card].cfg.io_base, 2);
if (opl3sa2_cards_num) {
printk(KERN_WARNING
PFX "There was a problem probing one "
" of the ISA PNP cards, continuing\n");
opl3sa2_cards_num--;
continue;
} else
return -ENODEV;
}
attach_opl3sa2(&opl3sa2_state[card].cfg, card);
conf_printf(opl3sa2_state[card].chipset_name, &opl3sa2_state[card].cfg);
attach_opl3sa2_mixer(&opl3sa2_state[card].cfg, card);
attach_opl3sa2_mss(&opl3sa2_state[card].cfg_mss, ports);
/* ewww =) */
opl3sa2_state[card].card = card;
/*
* Set the Yamaha 3D enhancement mode (aka Ymersion) if asked to and
* it's supported.
*/
if (ymode != -1) {
if (opl3sa2_state[card].chipset == CHIPSET_OPL3SA2) {
printk(KERN_ERR
PFX "ymode not supported on OPL3-SA2\n");
}
else {
opl3sa2_set_ymode(&opl3sa2_state[card].cfg, ymode);
}
}
/* Set A/D input to Mono loopback if asked to. */
if (loopback != -1) {
opl3sa2_set_loopback(&opl3sa2_state[card].cfg, loopback);
}
/* Attach MPU if we've been asked to do so, failure isn't fatal */
if (opl3sa2_state[card].cfg_mpu.io_base != -1) {
int base = opl3sa2_state[card].cfg_mpu.io_base;
struct resource *ports;
ports = request_region(base, 2, "mpu401");
if (!ports)
goto out;
if (!probe_mpu401(&opl3sa2_state[card].cfg_mpu, ports)) {
release_region(base, 2);
goto out;
}
if (attach_mpu401(&opl3sa2_state[card].cfg_mpu, THIS_MODULE)) {
printk(KERN_ERR PFX "failed to attach MPU401\n");
opl3sa2_state[card].cfg_mpu.slots[1] = -1;
}
}
}
out:
if (isapnp) {
printk(KERN_NOTICE PFX "%d PnP card(s) found.\n", opl3sa2_cards_num);
}
return 0;
}
/*
* Uninstall OPL3-SA2 based card(s).
*/
static void __exit cleanup_opl3sa2(void)
{
int card;
for(card = 0; card < opl3sa2_cards_num; card++) {
if (opl3sa2_state[card].cfg_mpu.slots[1] != -1) {
unload_opl3sa2_mpu(&opl3sa2_state[card].cfg_mpu);
}
unload_opl3sa2_mss(&opl3sa2_state[card].cfg_mss);
unload_opl3sa2(&opl3sa2_state[card].cfg, card);
#ifdef CONFIG_PNP
pnp_unregister_driver(&opl3sa2_driver);
#endif
}
}
module_init(init_opl3sa2);
module_exit(cleanup_opl3sa2);
#ifndef MODULE
static int __init setup_opl3sa2(char *str)
{
/* io, irq, dma, dma2,... */
#ifdef CONFIG_PNP
int ints[11];
#else
int ints[9];
#endif
str = get_options(str, ARRAY_SIZE(ints), ints);
io = ints[1];
irq = ints[2];
dma = ints[3];
dma2 = ints[4];
mss_io = ints[5];
mpu_io = ints[6];
ymode = ints[7];
loopback = ints[8];
#ifdef CONFIG_PNP
isapnp = ints[9];
multiple = ints[10];
#endif
return 1;
}
__setup("opl3sa2=", setup_opl3sa2);
#endif
