/******************************************************************************
Copyright(c) 2004 Intel Corporation. All rights reserved.
Portions of this file are based on the WEP enablement code provided by the
Host AP project hostap-drivers v0.1.3
Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
<jkmaline@cc.hut.fi>
Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
This program is free software; you can redistribute it and/or modify it
under the terms of version 2 of the GNU General Public License as
published by the Free Software Foundation.
This program is distributed in the hope that it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
You should have received a copy of the GNU General Public License along with
this program; if not, write to the Free Software Foundation, Inc., 59
Temple Place - Suite 330, Boston, MA 02111-1307, USA.
The full GNU General Public License is included in this distribution in the
file called LICENSE.
Contact Information:
James P. Ketrenos <ipw2100-admin@linux.intel.com>
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
******************************************************************************/
#include <linux/wireless.h>
#include <linux/version.h>
#include <linux/kmod.h>
#include <linux/module.h>
#include <net/ieee80211.h>
static const char *ieee80211_modes[] = {
"?", "a", "b", "ab", "g", "ag", "bg", "abg"
};
#define MAX_CUSTOM_LEN 64
static inline char *ipw2100_translate_scan(struct ieee80211_device *ieee,
char *start, char *stop,
struct ieee80211_network *network)
{
char custom[MAX_CUSTOM_LEN];
char *p;
struct iw_event iwe;
int i, j;
u8 max_rate, rate;
/* First entry *MUST* be the AP MAC address */
iwe.cmd = SIOCGIWAP;
iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
memcpy(iwe.u.ap_addr.sa_data, network->bssid, ETH_ALEN);
start = iwe_stream_add_event(start, stop, &iwe, IW_EV_ADDR_LEN);
/* Remaining entries will be displayed in the order we provide them */
/* Add the ESSID */
iwe.cmd = SIOCGIWESSID;
iwe.u.data.flags = 1;
if (network->flags & NETWORK_EMPTY_ESSID) {
iwe.u.data.length = sizeof("<hidden>");
start = iwe_stream_add_point(start, stop, &iwe, "<hidden>");
} else {
iwe.u.data.length = min(network->ssid_len, (u8)32);
start = iwe_stream_add_point(start, stop, &iwe, network->ssid);
}
/* Add the protocol name */
iwe.cmd = SIOCGIWNAME;
snprintf(iwe.u.name, IFNAMSIZ, "IEEE 802.11%s", ieee80211_modes[network->mode]);
start = iwe_stream_add_event(start, stop, &iwe, IW_EV_CHAR_LEN);
/* Add mode */
iwe.cmd = SIOCGIWMODE;
if (network->capability &
(WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS)) {
if (network->capability & WLAN_CAPABILITY_ESS)
iwe.u.mode = IW_MODE_MASTER;
else
iwe.u.mode = IW_MODE_ADHOC;
start = iwe_stream_add_event(start, stop, &iwe,
IW_EV_UINT_LEN);
}
/* Add frequency/channel */
iwe.cmd = SIOCGIWFREQ;
/* iwe.u.freq.m = ieee80211_frequency(network->channel, network->mode);
iwe.u.freq.e = 3; */
iwe.u.freq.m = network->channel;
iwe.u.freq.e = 0;
iwe.u.freq.i = 0;
start = iwe_stream_add_event(start, stop, &iwe, IW_EV_FREQ_LEN);
/* Add encryption capability */
iwe.cmd = SIOCGIWENCODE;
if (network->capability & WLAN_CAPABILITY_PRIVACY)
iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
else
iwe.u.data.flags = IW_ENCODE_DISABLED;
iwe.u.data.length = 0;
start = iwe_stream_add_point(start, stop, &iwe, network->ssid);
/* Add basic and extended rates */
max_rate = 0;
p = custom;
p += snprintf(p, MAX_CUSTOM_LEN - (p - custom), " Rates (Mb/s): ");
for (i = 0, j = 0; i < network->rates_len; ) {
if (j < network->rates_ex_len &&
((network->rates_ex[j] & 0x7F) <
(network->rates[i] & 0x7F)))
rate = network->rates_ex[j++] & 0x7F;
else
rate = network->rates[i++] & 0x7F;
if (rate > max_rate)
max_rate = rate;
p += snprintf(p, MAX_CUSTOM_LEN - (p - custom),
"%d%s ", rate >> 1, (rate & 1) ? ".5" : "");
}
for (; j < network->rates_ex_len; j++) {
rate = network->rates_ex[j] & 0x7F;
p += snprintf(p, MAX_CUSTOM_LEN - (p - custom),
"%d%s ", rate >> 1, (rate & 1) ? ".5" : "");
if (rate > max_rate)
max_rate = rate;
}
iwe.cmd = SIOCGIWRATE;
iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0;
iwe.u.bitrate.value = max_rate * 500000;
start = iwe_stream_add_event(start, stop, &iwe,
IW_EV_PARAM_LEN);
iwe.cmd = IWEVCUSTOM;
iwe.u.data.length = p - custom;
if (iwe.u.data.length)
start = iwe_stream_add_point(start, stop, &iwe, custom);
/* Add quality statistics */
/* TODO: Fix these values... */
iwe.cmd = IWEVQUAL;
iwe.u.qual.qual = network->stats.signal;
iwe.u.qual.level = network->stats.rssi;
iwe.u.qual.noise = network->stats.noise;
iwe.u.qual.updated = network->stats.mask & IEEE80211_STATMASK_WEMASK;
if (!(network->stats.mask & IEEE80211_STATMASK_RSSI))
iwe.u.qual.updated |= IW_QUAL_LEVEL_INVALID;
if (!(network->stats.mask & IEEE80211_STATMASK_NOISE))
iwe.u.qual.updated |= IW_QUAL_NOISE_INVALID;
if (!(network->stats.mask & IEEE80211_STATMASK_SIGNAL))
iwe.u.qual.updated |= IW_QUAL_QUAL_INVALID;
start = iwe_stream_add_event(start, stop, &iwe, IW_EV_QUAL_LEN);
iwe.cmd = IWEVCUSTOM;
p = custom;
iwe.u.data.length = p - custom;
if (iwe.u.data.length)
start = iwe_stream_add_point(start, stop, &iwe, custom);
if (ieee->wpa_enabled && network->wpa_ie_len){
char buf[MAX_WPA_IE_LEN * 2 + 30];
u8 *p = buf;
p += sprintf(p, "wpa_ie=");
for (i = 0; i < network->wpa_ie_len; i++) {
p += sprintf(p, "%02x", network->wpa_ie[i]);
}
memset(&iwe, 0, sizeof(iwe));
iwe.cmd = IWEVCUSTOM;
iwe.u.data.length = strlen(buf);
start = iwe_stream_add_point(start, stop, &iwe, buf);
}
if (ieee->wpa_enabled && network->rsn_ie_len){
char buf[MAX_WPA_IE_LEN * 2 + 30];
u8 *p = buf;
p += sprintf(p, "rsn_ie=");
for (i = 0; i < network->rsn_ie_len; i++) {
p += sprintf(p, "%02x", network->rsn_ie[i]);
}
memset(&iwe, 0, sizeof(iwe));
iwe.cmd = IWEVCUSTOM;
iwe.u.data.length = strlen(buf);
start = iwe_stream_add_point(start, stop, &iwe, buf);
}
/* Add EXTRA: Age to display seconds since last beacon/probe response
* for given network. */
iwe.cmd = IWEVCUSTOM;
p = custom;
p += snprintf(p, MAX_CUSTOM_LEN - (p - custom),
" Last beacon: %lums ago", (jiffies - network->last_scanned) / (HZ / 100));
iwe.u.data.length = p - custom;
if (iwe.u.data.length)
start = iwe_stream_add_point(start, stop, &iwe, custom);
return start;
}
int ieee80211_wx_get_scan(struct ieee80211_device *ieee,
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
struct ieee80211_network *network;
unsigned long flags;
char *ev = extra;
char *stop = ev + IW_SCAN_MAX_DATA;
int i = 0;
IEEE80211_DEBUG_WX("Getting scan\n");
spin_lock_irqsave(&ieee->lock, flags);
list_for_each_entry(network, &ieee->network_list, list) {
i++;
if (ieee->scan_age == 0 ||
time_after(network->last_scanned + ieee->scan_age, jiffies))
ev = ipw2100_translate_scan(ieee, ev, stop, network);
else
IEEE80211_DEBUG_SCAN(
"Not showing network '%s ("
MAC_FMT ")' due to age (%lums).\n",
escape_essid(network->ssid,
network->ssid_len),
MAC_ARG(network->bssid),
(jiffies - network->last_scanned) / (HZ / 100));
}
spin_unlock_irqrestore(&ieee->lock, flags);
wrqu->data.length = ev - extra;
wrqu->data.flags = 0;
IEEE80211_DEBUG_WX("exit: %d networks returned.\n", i);
return 0;
}
int ieee80211_wx_set_encode(struct ieee80211_device *ieee,
struct iw_request_info *info,
union iwreq_data *wrqu, char *keybuf)
{
struct iw_point *erq = &(wrqu->encoding);
struct net_device *dev = ieee->dev;
struct ieee80211_security sec = {
.flags = 0
};
int i, key, key_provided, len;
struct ieee80211_crypt_data **crypt;
IEEE80211_DEBUG_WX("SET_ENCODE\n");
key = erq->flags & IW_ENCODE_INDEX;
if (key) {
if (key > WEP_KEYS)
return -EINVAL;
key--;
key_provided = 1;
} else {
key_provided = 0;
key = ieee->tx_keyidx;
}
IEEE80211_DEBUG_WX("Key: %d [%s]\n", key, key_provided ?
"provided" : "default");
crypt = &ieee->crypt[key];
if (erq->flags & IW_ENCODE_DISABLED) {
if (key_provided && *crypt) {
IEEE80211_DEBUG_WX("Disabling encryption on key %d.\n",
key);
ieee80211_crypt_delayed_deinit(ieee, crypt);
} else
IEEE80211_DEBUG_WX("Disabling encryption.\n");
/* Check all the keys to see if any are still configured,
* and if no key index was provided, de-init them all */
for (i = 0; i < WEP_KEYS; i++) {
if (ieee->crypt[i] != NULL) {
if (key_provided)
break;
ieee80211_crypt_delayed_deinit(
ieee, &ieee->crypt[i]);
}
}
if (i == WEP_KEYS) {
sec.enabled = 0;
sec.level = SEC_LEVEL_0;
sec.flags |= SEC_ENABLED | SEC_LEVEL;
}
goto done;
}
sec.enabled = 1;
sec.flags |= SEC_ENABLED;
if (*crypt != NULL && (*crypt)->ops != NULL &&
strcmp((*crypt)->ops->name, "WEP") != 0) {
/* changing to use WEP; deinit previously used algorithm
* on this key */
ieee80211_crypt_delayed_deinit(ieee, crypt);
}
if (*crypt == NULL) {
struct ieee80211_crypt_data *new_crypt;
/* take WEP into use */
new_crypt = kmalloc(sizeof(struct ieee80211_crypt_data),
GFP_KERNEL);
if (new_crypt == NULL)
return -ENOMEM;
memset(new_crypt, 0, sizeof(struct ieee80211_crypt_data));
new_crypt->ops = ieee80211_get_crypto_ops("WEP");
if (!new_crypt->ops) {
request_module("ieee80211_crypt_wep");
new_crypt->ops = ieee80211_get_crypto_ops("WEP");
}
if (new_crypt->ops && try_module_get(new_crypt->ops->owner))
new_crypt->priv = new_crypt->ops->init(key);
if (!new_crypt->ops || !new_crypt->priv) {
kfree(new_crypt);
new_crypt = NULL;
printk(KERN_WARNING "%s: could not initialize WEP: "
"load module ieee80211_crypt_wep\n",
dev->name);
return -EOPNOTSUPP;
}
*crypt = new_crypt;
}
/* If a new key was provided, set it up */
if (erq->length > 0) {
len = erq->length <= 5 ? 5 : 13;
memcpy(sec.keys[key], keybuf, erq->length);
if (len > erq->length)
memset(sec.keys[key] + erq->length, 0,
len - erq->length);
IEEE80211_DEBUG_WX("Setting key %d to '%s' (%d:%d bytes)\n",
key, escape_essid(sec.keys[key], len),
erq->length, len);
sec.key_sizes[key] = len;
(*crypt)->ops->set_key(sec.keys[key], len, NULL,
(*crypt)->priv);
sec.flags |= (1 << key);
/* This ensures a key will be activated if no key is
* explicitely set */
if (key == sec.active_key)
sec.flags |= SEC_ACTIVE_KEY;
} else {
len = (*crypt)->ops->get_key(sec.keys[key], WEP_KEY_LEN,
NULL, (*crypt)->priv);
if (len == 0) {
/* Set a default key of all 0 */
IEEE80211_DEBUG_WX("Setting key %d to all zero.\n",
key);
memset(sec.keys[key], 0, 13);
(*crypt)->ops->set_key(sec.keys[key], 13, NULL,
(*crypt)->priv);
sec.key_sizes[key] = 13;
sec.flags |= (1 << key);
}
/* No key data - just set the default TX key index */
if (key_provided) {
IEEE80211_DEBUG_WX(
"Setting key %d to default Tx key.\n", key);
ieee->tx_keyidx = key;
sec.active_key = key;
sec.flags |= SEC_ACTIVE_KEY;
}
}
done:
ieee->open_wep = !(erq->flags & IW_ENCODE_RESTRICTED);
sec.auth_mode = ieee->open_wep ? WLAN_AUTH_OPEN : WLAN_AUTH_SHARED_KEY;
sec.flags |= SEC_AUTH_MODE;
IEEE80211_DEBUG_WX("Auth: %s\n", sec.auth_mode == WLAN_AUTH_OPEN ?
"OPEN" : "SHARED KEY");
/* For now we just support WEP, so only set that security level...
* TODO: When WPA is added this is one place that needs to change */
sec.flags |= SEC_LEVEL;
sec.level = SEC_LEVEL_1; /* 40 and 104 bit WEP */
if (ieee->set_security)
ieee->set_security(dev, &sec);
/* Do not reset port if card is in Managed mode since resetting will
* generate new IEEE 802.11 authentication which may end up in looping
* with IEEE 802.1X. If your hardware requires a reset after WEP
* configuration (for example... Prism2), implement the reset_port in
* the callbacks structures used to initialize the 802.11 stack. */
if (ieee->reset_on_keychange &&
ieee->iw_mode != IW_MODE_INFRA &&
ieee->reset_port && ieee->reset_port(dev)) {
printk(KERN_DEBUG "%s: reset_port failed\n", dev->name);
return -EINVAL;
}
return 0;
}
int ieee80211_wx_get_encode(struct ieee80211_device *ieee,
struct iw_request_info *info,
union iwreq_data *wrqu, char *keybuf)
{
struct iw_point *erq = &(wrqu->encoding);
int len, key;
struct ieee80211_crypt_data *crypt;
IEEE80211_DEBUG_WX("GET_ENCODE\n");
key = erq->flags & IW_ENCODE_INDEX;
if (key) {
if (key > WEP_KEYS)
return -EINVAL;
key--;
} else
key = ieee->tx_keyidx;
crypt = ieee->crypt[key];
erq->flags = key + 1;
if (crypt == NULL || crypt->ops == NULL) {
erq->length = 0;
erq->flags |= IW_ENCODE_DISABLED;
return 0;
}
if (strcmp(crypt->ops->name, "WEP") != 0) {
/* only WEP is supported with wireless extensions, so just
* report that encryption is used */
erq->length = 0;
erq->flags |= IW_ENCODE_ENABLED;
return 0;
}
len = crypt->ops->get_key(keybuf, WEP_KEY_LEN, NULL, crypt->priv);
erq->length = (len >= 0 ? len : 0);
erq->flags |= IW_ENCODE_ENABLED;
if (ieee->open_wep)
erq->flags |= IW_ENCODE_OPEN;
else
erq->flags |= IW_ENCODE_RESTRICTED;
return 0;
}
EXPORT_SYMBOL(ieee80211_wx_get_scan);
EXPORT_SYMBOL(ieee80211_wx_set_encode);
EXPORT_SYMBOL(ieee80211_wx_get_encode);
