/*
* PCI HotPlug Core Functions
*
* Copyright (C) 1995,2001 Compaq Computer Corporation
* Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
* Copyright (C) 2001 IBM Corp.
*
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
* NON INFRINGEMENT. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <kristen.c.accardi@intel.com>
*
*/
#ifndef _PCI_HOTPLUG_H
#define _PCI_HOTPLUG_H
/* These values come from the PCI Hotplug Spec */
enum pci_bus_speed {
PCI_SPEED_33MHz = 0x00,
PCI_SPEED_66MHz = 0x01,
PCI_SPEED_66MHz_PCIX = 0x02,
PCI_SPEED_100MHz_PCIX = 0x03,
PCI_SPEED_133MHz_PCIX = 0x04,
PCI_SPEED_66MHz_PCIX_ECC = 0x05,
PCI_SPEED_100MHz_PCIX_ECC = 0x06,
PCI_SPEED_133MHz_PCIX_ECC = 0x07,
PCI_SPEED_66MHz_PCIX_266 = 0x09,
PCI_SPEED_100MHz_PCIX_266 = 0x0a,
PCI_SPEED_133MHz_PCIX_266 = 0x0b,
PCI_SPEED_66MHz_PCIX_533 = 0x11,
PCI_SPEED_100MHz_PCIX_533 = 0x12,
PCI_SPEED_133MHz_PCIX_533 = 0x13,
PCI_SPEED_UNKNOWN = 0xff,
};
/* These values come from the PCI Express Spec */
enum pcie_link_width {
PCIE_LNK_WIDTH_RESRV = 0x00,
PCIE_LNK_X1 = 0x01,
PCIE_LNK_X2 = 0x02,
PCIE_LNK_X4 = 0x04,
PCIE_LNK_X8 = 0x08,
PCIE_LNK_X12 = 0x0C,
PCIE_LNK_X16 = 0x10,
PCIE_LNK_X32 = 0x20,
PCIE_LNK_WIDTH_UNKNOWN = 0xFF,
};
enum pcie_link_speed {
PCIE_2PT5GB = 0x14,
PCIE_LNK_SPEED_UNKNOWN = 0xFF,
};
struct hotplug_slot;
struct hotplug_slot_attribute {
struct attribute attr;
ssize_t (*show)(struct hotplug_slot *, char *);
ssize_t (*store)(struct hotplug_slot *, const char *, size_t);
};
#define to_hotplug_attr(n) container_of(n, struct hotplug_slot_attribute, attr);
/**
* struct hotplug_slot_ops -the callbacks that the hotplug pci core can use
* @owner: The module owner of this structure
* @enable_slot: Called when the user wants to enable a specific pci slot
* @disable_slot: Called when the user wants to disable a specific pci slot
* @set_attention_status: Called to set the specific slot's attention LED to
* the specified value
* @hardware_test: Called to run a specified hardware test on the specified
* slot.
* @get_power_status: Called to get the current power status of a slot.
* If this field is NULL, the value passed in the struct hotplug_slot_info
* will be used when this value is requested by a user.
* @get_attention_status: Called to get the current attention status of a slot.
* If this field is NULL, the value passed in the struct hotplug_slot_info
* will be used when this value is requested by a user.
* @get_latch_status: Called to get the current latch status of a slot.
* If this field is NULL, the value passed in the struct hotplug_slot_info
* will be used when this value is requested by a user.
* @get_adapter_status: Called to get see if an adapter is present in the slot or not.
* If this field is NULL, the value passed in the struct hotplug_slot_info
* will be used when this value is requested by a user.
* @get_max_bus_speed: Called to get the max bus speed for a slot.
* If this field is NULL, the value passed in the struct hotplug_slot_info
* will be used when this value is requested by a user.
* @get_cur_bus_speed: Called to get the current bus speed for a slot.
* If this field is NULL, the value passed in the struct hotplug_slot_info
* will be used when this value is requested by a user.
*
* The table of function pointers that is passed to the hotplug pci core by a
* hotplug pci driver. These functions are called by the hotplug pci core when
* the user wants to do something to a specific slot (query it for information,
* set an LED, enable / disable power, etc.)
*/
struct hotplug_slot_ops {
struct module *owner;
int (*enable_slot) (struct hotplug_slot *slot);
int (*disable_slot) (struct hotplug_slot *slot);
int (*set_attention_status) (struct hotplug_slot *slot, u8 value);
int (*hardware_test) (struct hotplug_slot *slot, u32 value);
int (*get_power_status) (struct hotplug_slot *slot, u8 *value);
int (*get_attention_status) (struct hotplug_slot *slot, u8 *value);
int (*get_latch_status) (struct hotplug_slot *slot, u8 *value);
int (*get_adapter_status) (struct hotplug_slot *slot, u8 *value);
int (*get_max_bus_speed) (struct hotplug_slot *slot, enum pci_bus_speed *value);
int (*get_cur_bus_speed) (struct hotplug_slot *slot, enum pci_bus_speed *value);
};
/**
* struct hotplug_slot_info - used to notify the hotplug pci core of the state of the slot
* @power: if power is enabled or not (1/0)
* @attention_status: if the attention light is enabled or not (1/0)
* @latch_status: if the latch (if any) is open or closed (1/0)
* @adapter_present: if there is a pci board present in the slot or not (1/0)
* @address: (domain << 16 | bus << 8 | dev)
*
* Used to notify the hotplug pci core of the status of a specific slot.
*/
struct hotplug_slot_info {
u8 power_status;
u8 attention_status;
u8 latch_status;
u8 adapter_status;
enum pci_bus_speed max_bus_speed;
enum pci_bus_speed cur_bus_speed;
};
/**
* struct hotplug_slot - used to register a physical slot with the hotplug pci core
* @ops: pointer to the &struct hotplug_slot_ops to be used for this slot
* @info: pointer to the &struct hotplug_slot_info for the initial values for
* this slot.
* @release: called during pci_hp_deregister to free memory allocated in a
* hotplug_slot structure.
* @private: used by the hotplug pci controller driver to store whatever it
* needs.
*/
struct hotplug_slot {
struct hotplug_slot_ops *ops;
struct hotplug_slot_info *info;
void (*release) (struct hotplug_slot *slot);
void *private;
/* Variables below this are for use only by the hotplug pci core. */
struct list_head slot_list;
struct pci_slot *pci_slot;
};
#define to_hotplug_slot(n) container_of(n, struct hotplug_slot, kobj)
static inline const char *hotplug_slot_name(const struct hotplug_slot *slot)
{
return pci_slot_name(slot->pci_slot);
}
extern int pci_hp_register(struct hotplug_slot *, struct pci_bus *, int nr,
const char *name);
extern int pci_hp_deregister(struct hotplug_slot *slot);
extern int __must_check pci_hp_change_slot_info (struct hotplug_slot *slot,
struct hotplug_slot_info *info);
/* PCI Setting Record (Type 0) */
struct hpp_type0 {
u32 revision;
u8 cache_line_size;
u8 latency_timer;
u8 enable_serr;
u8 enable_perr;
};
/* PCI-X Setting Record (Type 1) */
struct hpp_type1 {
u32 revision;
u8 max_mem_read;
u8 avg_max_split;
u16 tot_max_split;
};
/* PCI Express Setting Record (Type 2) */
struct hpp_type2 {
u32 revision;
u32 unc_err_mask_and;
u32 unc_err_mask_or;
u32 unc_err_sever_and;
u32 unc_err_sever_or;
u32 cor_err_mask_and;
u32 cor_err_mask_or;
u32 adv_err_cap_and;
u32 adv_err_cap_or;
u16 pci_exp_devctl_and;
u16 pci_exp_devctl_or;
u16 pci_exp_lnkctl_and;
u16 pci_exp_lnkctl_or;
u32 sec_unc_err_sever_and;
u32 sec_unc_err_sever_or;
u32 sec_unc_err_mask_and;
u32 sec_unc_err_mask_or;
};
struct hotplug_params {
struct hpp_type0 *t0; /* Type0: NULL if not available */
struct hpp_type1 *t1; /* Type1: NULL if not available */
struct hpp_type2 *t2; /* Type2: NULL if not available */
struct hpp_type0 type0_data;
struct hpp_type1 type1_data;
struct hpp_type2 type2_data;
};
#ifdef CONFIG_ACPI
#include <acpi/acpi.h>
#include <acpi/acpi_bus.h>
#include <acpi/actypes.h>
extern acpi_status acpi_get_hp_params_from_firmware(struct pci_bus *bus,
struct hotplug_params *hpp);
int acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev, u32 flags);
int acpi_root_bridge(acpi_handle handle);
int acpi_pci_check_ejectable(struct pci_bus *pbus, acpi_handle handle);
int acpi_pci_detect_ejectable(struct pci_bus *pbus);
#endif
#endif
