#ifndef _INPUT_H
#define _INPUT_H
/*
* Copyright (c) 1999-2002 Vojtech Pavlik
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
#ifdef __KERNEL__
#include <linux/time.h>
#include <linux/list.h>
#else
#include <sys/time.h>
#include <sys/ioctl.h>
#include <sys/types.h>
#include <asm/types.h>
#endif
/*
* The event structure itself
*/
struct input_event {
struct timeval time;
__u16 type;
__u16 code;
__s32 value;
};
/*
* Protocol version.
*/
#define EV_VERSION 0x010000
/*
* IOCTLs (0x00 - 0x7f)
*/
struct input_id {
__u16 bustype;
__u16 vendor;
__u16 product;
__u16 version;
};
struct input_absinfo {
__s32 value;
__s32 minimum;
__s32 maximum;
__s32 fuzz;
__s32 flat;
};
#define EVIOCGVERSION _IOR('E', 0x01, int) /* get driver version */
#define EVIOCGID _IOR('E', 0x02, struct input_id) /* get device ID */
#define EVIOCGREP _IOR('E', 0x03, int[2]) /* get repeat settings */
#define EVIOCSREP _IOW('E', 0x03, int[2]) /* set repeat settings */
#define EVIOCGKEYCODE _IOR('E', 0x04, int[2]) /* get keycode */
#define EVIOCSKEYCODE _IOW('E', 0x04, int[2]) /* set keycode */
#define EVIOCGNAME(len) _IOC(_IOC_READ, 'E', 0x06, len) /* get device name */
#define EVIOCGPHYS(len) _IOC(_IOC_READ, 'E', 0x07, len) /* get physical location */
#define EVIOCGUNIQ(len) _IOC(_IOC_READ, 'E', 0x08, len) /* get unique identifier */
#define EVIOCGKEY(len) _IOC(_IOC_READ, 'E', 0x18, len) /* get global keystate */
#define EVIOCGLED(len) _IOC(_IOC_READ, 'E', 0x19, len) /* get all LEDs */
#define EVIOCGSND(len) _IOC(_IOC_READ, 'E', 0x1a, len) /* get all sounds status */
#define EVIOCGSW(len) _IOC(_IOC_READ, 'E', 0x1b, len) /* get all switch states */
#define EVIOCGBIT(ev,len) _IOC(_IOC_READ, 'E', 0x20 + ev, len) /* get event bits */
#define EVIOCGABS(abs) _IOR('E', 0x40 + abs, struct input_absinfo) /* get abs value/limits */
#define EVIOCSABS(abs) _IOW('E', 0xc0 + abs, struct input_absinfo) /* set abs value/limits */
#define EVIOCSFF _IOC(_IOC_WRITE, 'E', 0x80, sizeof(struct ff_effect)) /* send a force effect to a force feedback device */
#define EVIOCRMFF _IOW('E', 0x81, int) /* Erase a force effect */
#define EVIOCGEFFECTS _IOR('E', 0x84, int) /* Report number of effects playable at the same time */
#define EVIOCGRAB _IOW('E', 0x90, int) /* Grab/Release device */
/*
* Event types
*/
#define EV_SYN 0x00
#define EV_KEY 0x01
#define EV_REL 0x02
#define EV_ABS 0x03
#define EV_MSC 0x04
#define EV_SW 0x05
#define EV_LED 0x11
#define EV_SND 0x12
#define EV_REP 0x14
#define EV_FF 0x15
#define EV_PWR 0x16
#define EV_FF_STATUS 0x17
#define EV_MAX 0x1f
#define EV_CNT (EV_MAX+1)
/*
* Synchronization events.
*/
#define SYN_REPORT 0
#define SYN_CONFIG 1
/*
* Keys and buttons
*
* Most of the keys/buttons are modeled after USB HUT 1.12
* (see http://www.usb.org/developers/hidpage).
* Abbreviations in the comments:
* AC - Application Control
* AL - Application Launch Button
* SC - System Control
*/
#define KEY_RESERVED 0
#define KEY_ESC 1
#define KEY_1 2
#define KEY_2 3
#define KEY_3 4
#define KEY_4 5
#define KEY_5 6
#define KEY_6 7
#define KEY_7 8
#define KEY_8 9
#define KEY_9 10
#define KEY_0 11
#define KEY_MINUS 12
#define KEY_EQUAL 13
#define KEY_BACKSPACE 14
#define KEY_TAB 15
#define KEY_Q 16
#define KEY_W 17
#define KEY_E 18
#define KEY_R 19
#define KEY_T 20
#define KEY_Y 21
#define KEY_U 22
#define KEY_I 23
#define KEY_O 24
#define KEY_P 25
#define KEY_LEFTBRACE 26
#define KEY_RIGHTBRACE 27
#define KEY_ENTER 28
#define KEY_LEFTCTRL 29
#define KEY_A 30
#define KEY_S 31
#define KEY_D 32
#define KEY_F 33
#define KEY_G 34
#define KEY_H 35
#define KEY_J 36
#define KEY_K 37
#define KEY_L 38
#define KEY_SEMICOLON 39
#define KEY_APOSTROPHE 40
#define KEY_GRAVE 41
#define KEY_LEFTSHIFT 42
#define KEY_BACKSLASH 43
#define KEY_Z 44
#define KEY_X 45
#define KEY_C 46
#define KEY_V 47
#define KEY_B 48
#define KEY_N 49
#define KEY_M 50
#define KEY_COMMA 51
#define KEY_DOT 52
#define KEY_SLASH 53
#define KEY_RIGHTSHIFT 54
#define KEY_KPASTERISK 55
#define KEY_LEFTALT 56
#define KEY_SPACE 57
#define KEY_CAPSLOCK 58
#define KEY_F1 59
#define KEY_F2 60
#define KEY_F3 61
#define KEY_F4 62
#define KEY_F5 63
#define KEY_F6 64
#define KEY_F7 65
#define KEY_F8 66
#define KEY_F9 67
#define KEY_F10 68
#define KEY_NUMLOCK 69
#define KEY_SCROLLLOCK 70
#define KEY_KP7 71
#define KEY_KP8 72
#define KEY_KP9 73
#define KEY_KPMINUS 74
#define KEY_KP4 75
#define KEY_KP5 76
#define KEY_KP6 77
#define KEY_KPPLUS 78
#define KEY_KP1 79
#define KEY_KP2 80
#define KEY_KP3 81
#define KEY_KP0 82
#define KEY_KPDOT 83
#define KEY_ZENKAKUHANKAKU 85
#define KEY_102ND 86
#define KEY_F11 87
#define KEY_F12 88
#define KEY_RO 89
#define KEY_KATAKANA 90
#define KEY_HIRAGANA 91
#define KEY_HENKAN 92
#define KEY_KATAKANAHIRAGANA 93
#define KEY_MUHENKAN 94
#define KEY_KPJPCOMMA 95
#define KEY_KPENTER 96
#define KEY_RIGHTCTRL 97
#define KEY_KPSLASH 98
#define KEY_SYSRQ 99
#define KEY_RIGHTALT 100
#define KEY_LINEFEED 101
#define KEY_HOME 102
#define KEY_UP 103
#define KEY_PAGEUP 104
#define KEY_LEFT 105
#define KEY_RIGHT 106
#define KEY_END 107
#define KEY_DOWN 108
#define KEY_PAGEDOWN 109
#define KEY_INSERT 110
#define KEY_DELETE 111
#define KEY_MACRO 112
#define KEY_MUTE 113
#define KEY_VOLUMEDOWN 114
#define KEY_VOLUMEUP 115
#define KEY_POWER 116 /* SC System Power Down */
#define KEY_KPEQUAL 117
#define KEY_KPPLUSMINUS 118
#define KEY_PAUSE 119
#define KEY_KPCOMMA 121
#define KEY_HANGEUL 122
#define KEY_HANGUEL KEY_HANGEUL
#define KEY_HANJA 123
#define KEY_YEN 124
#define KEY_LEFTMETA 125
#define KEY_RIGHTMETA 126
#define KEY_COMPOSE 127
#define KEY_STOP 128 /* AC Stop */
#define KEY_AGAIN 129
#define KEY_PROPS 130 /* AC Properties */
#define KEY_UNDO 131 /* AC Undo */
#define KEY_FRONT 132
#define KEY_COPY 133 /* AC Copy */
#define KEY_OPEN 134 /* AC Open */
#define KEY_PASTE 135 /* AC Paste */
#define KEY_FIND 136 /* AC Search */
#define KEY_CUT 137 /* AC Cut */
#define KEY_HELP 138 /* AL Integrated Help Center */
#define KEY_MENU 139 /* Menu (show menu) */
#define KEY_CALC 140 /* AL Calculator */
#define KEY_SETUP 141
#define KEY_SLEEP 142 /* SC System Sleep */
#define KEY_WAKEUP 143 /* System Wake Up */
#define KEY_FILE 144 /* AL Local Machine Browser */
#define KEY_SENDFILE 145
#define KEY_DELETEFILE 146
#define KEY_XFER 147
#define KEY_PROG1 148
#define KEY_PROG2 149
#define KEY_WWW 150 /* AL Internet Browser */
#define KEY_MSDOS 151
#define KEY_COFFEE 152 /* AL Terminal Lock/Screensaver */
#define KEY_SCREENLOCK KEY_COFFEE
#define KEY_DIRECTION 153
#define KEY_CYCLEWINDOWS 154
#define KEY_MAIL 155
#define KEY_BOOKMARKS 156 /* AC Bookmarks */
#define KEY_COMPUTER 157
#define KEY_BACK 158 /* AC Back */
#define KEY_FORWARD 159 /* AC Forward */
#define KEY_CLOSECD 160
#define KEY_EJECTCD 161
#define KEY_EJECTCLOSECD 162
#define KEY_NEXTSONG 163
#define KEY_PLAYPAUSE 164
#define KEY_PREVIOUSSONG 165
#define KEY_STOPCD 166
#define KEY_RECORD 167
#define KEY_REWIND 168
#define KEY_PHONE 169 /* Media Select Telephone */
#define KEY_ISO 170
#define KEY_CONFIG 171 /* AL Consumer Control Configuration */
#define KEY_HOMEPAGE 172 /* AC Home */
#define KEY_REFRESH 173 /* AC Refresh */
#define KEY_EXIT 174 /* AC Exit */
#define KEY_MOVE 175
#define KEY_EDIT 176
#define KEY_SCROLLUP 177
#define KEY_SCROLLDOWN 178
#define KEY_KPLEFTPAREN 179
#define KEY_KPRIGHTPAREN 180
#define KEY_NEW 181 /* AC New */
#define KEY_REDO 182 /* AC Redo/Repeat */
#define KEY_F13 183
#define KEY_F14 184
#define KEY_F15 185
#define KEY_F16 186
#define KEY_F17 187
#define KEY_F18 188
#define KEY_F19 189
#define KEY_F20 190
#define KEY_F21 191
#define KEY_F22 192
#define KEY_F23 193
#define KEY_F24 194
#define KEY_PLAYCD 200
#define KEY_PAUSECD 201
#define KEY_PROG3 202
#define KEY_PROG4 203
#define KEY_SUSPEND 205
#define KEY_CLOSE 206 /* AC Close */
#define KEY_PLAY 207
#define KEY_FASTFORWARD 208
#define KEY_BASSBOOST 209
#define KEY_PRINT 210 /* AC Print */
#define KEY_HP 211
#define KEY_CAMERA 212
#define KEY_SOUND 213
#define KEY_QUESTION 214
#define KEY_EMAIL 215
#define KEY_CHAT 216
#define KEY_SEARCH 217
#define KEY_CONNECT 218
#define KEY_FINANCE 219 /* AL Checkbook/Finance */
#define KEY_SPORT 220
#define KEY_SHOP 221
#define KEY_ALTERASE 222
#define KEY_CANCEL 223 /* AC Cancel */
#define KEY_BRIGHTNESSDOWN 224
#define KEY_BRIGHTNESSUP 225
#define KEY_MEDIA 226
#define KEY_SWITCHVIDEOMODE 227 /* Cycle between available video
outputs (Monitor/LCD/TV-out/etc) */
#define KEY_KBDILLUMTOGGLE 228
#define KEY_KBDILLUMDOWN 229
#define KEY_KBDILLUMUP 230
#define KEY_SEND 231 /* AC Send */
#define KEY_REPLY 232 /* AC Reply */
#define KEY_FORWARDMAIL 233 /* AC Forward Msg */
#define KEY_SAVE 234 /* AC Save */
#define KEY_DOCUMENTS 235
#define KEY_BATTERY 236
#define KEY_BLUETOOTH 237
#define KEY_WLAN 238
#define KEY_UWB 239
#define KEY_UNKNOWN 240
#define KEY_VIDEO_NEXT 241 /* drive next video source */
#define KEY_VIDEO_PREV 242 /* drive previous video source */
#define KEY_BRIGHTNESS_CYCLE 243 /* brightness up, after max is min */
#define KEY_BRIGHTNESS_ZERO 244 /* brightness off, use ambient */
#define KEY_DISPLAY_OFF 245 /* display device to off state */
#define KEY_WIMAX 246
#define BTN_MISC 0x100
#define BTN_0 0x100
#define BTN_1 0x101
#define BTN_2 0x102
#define BTN_3 0x103
#define BTN_4 0x104
#define BTN_5 0x105
#define BTN_6 0x106
#define BTN_7 0x107
#define BTN_8 0x108
#define BTN_9 0x109
#define BTN_MOUSE 0x110
#define BTN_LEFT 0x110
#define BTN_RIGHT 0x111
#define BTN_MIDDLE 0x112
#define BTN_SIDE 0x113
#define BTN_EXTRA 0x114
#define BTN_FORWARD 0x115
#define BTN_BACK 0x116
#define BTN_TASK 0x117
#define BTN_JOYSTICK 0x120
#define BTN_TRIGGER 0x120
#define BTN_THUMB 0x121
#define BTN_THUMB2 0x122
#define BTN_TOP 0x123
#define BTN_TOP2 0x124
#define BTN_PINKIE 0x125
#define BTN_BASE 0x126
#define BTN_BASE2 0x127
#define BTN_BASE3 0x128
#define BTN_BASE4 0x129
#define BTN_BASE5 0x12a
#define BTN_BASE6 0x12b
#define BTN_DEAD 0x12f
#define BTN_GAMEPAD 0x130
#define BTN_A 0x130
#define BTN_B 0x131
#define BTN_C 0x132
#define BTN_X 0x133
#define BTN_Y 0x134
#define BTN_Z 0x135
#define BTN_TL 0x136
#define BTN_TR 0x137
#define BTN_TL2 0x138
#define BTN_TR2 0x139
#define BTN_SELECT 0x13a
#define BTN_START 0x13b
#define BTN_MODE 0x13c
#define BTN_THUMBL 0x13d
#define BTN_THUMBR 0x13e
#define BTN_DIGI 0x140
#define BTN_TOOL_PEN 0x140
#define BTN_TOOL_RUBBER 0x141
#define BTN_TOOL_BRUSH 0x142
#define BTN_TOOL_PENCIL 0x143
#define BTN_TOOL_AIRBRUSH 0x144
#define BTN_TOOL_FINGER 0x145
#define BTN_TOOL_MOUSE 0x146
#define BTN_TOOL_LENS 0x147
#define BTN_TOUCH 0x14a
#define BTN_STYLUS 0x14b
#define BTN_STYLUS2 0x14c
#define BTN_TOOL_DOUBLETAP 0x14d
#define BTN_TOOL_TRIPLETAP 0x14e
#define BTN_WHEEL 0x150
#define BTN_GEAR_DOWN 0x150
#define BTN_GEAR_UP 0x151
#define KEY_OK 0x160
#define KEY_SELECT 0x161
#define KEY_GOTO 0x162
#define KEY_CLEAR 0x163
#define KEY_POWER2 0x164
#define KEY_OPTION 0x165
#define KEY_INFO 0x166 /* AL OEM Features/Tips/Tutorial */
#define KEY_TIME 0x167
#define KEY_VENDOR 0x168
#define KEY_ARCHIVE 0x169
#define KEY_PROGRAM 0x16a /* Media Select Program Guide */
#define KEY_CHANNEL 0x16b
#define KEY_FAVORITES 0x16c
#define KEY_EPG 0x16d
#define KEY_PVR 0x16e /* Media Select Home */
#define KEY_MHP 0x16f
#define KEY_LANGUAGE 0x170
#define KEY_TITLE 0x171
#define KEY_SUBTITLE 0x172
#define KEY_ANGLE 0x173
#define KEY_ZOOM 0x174
#define KEY_MODE 0x175
#define KEY_KEYBOARD 0x176
#define KEY_SCREEN 0x177
#define KEY_PC 0x178 /* Media Select Computer */
#define KEY_TV 0x179 /* Media Select TV */
#define KEY_TV2 0x17a /* Media Select Cable */
#define KEY_VCR 0x17b /* Media Select VCR */
#define KEY_VCR2 0x17c /* VCR Plus */
#define KEY_SAT 0x17d /* Media Select Satellite */
#define KEY_SAT2 0x17e
#define KEY_CD 0x17f /* Media Select CD */
#define KEY_TAPE 0x180 /* Media Select Tape */
#define KEY_RADIO 0x181
#define KEY_TUNER 0x182 /* Media Select Tuner */
#define KEY_PLAYER 0x183
#define KEY_TEXT 0x184
#define KEY_DVD 0x185 /* Media Select DVD */
#define KEY_AUX 0x186
#define KEY_MP3 0x187
#define KEY_AUDIO 0x188
#define KEY_VIDEO 0x189
#define KEY_DIRECTORY 0x18a
#define KEY_LIST 0x18b
#define KEY_MEMO 0x18c /* Media Select Messages */
#define KEY_CALENDAR 0x18d
#define KEY_RED 0x18e
#define KEY_GREEN 0x18f
#define KEY_YELLOW 0x190
#define KEY_BLUE 0x191
#define KEY_CHANNELUP 0x192 /* Channel Increment */
#define KEY_CHANNELDOWN 0x193 /* Channel Decrement */
#define KEY_FIRST 0x194
#define KEY_LAST 0x195 /* Recall Last */
#define KEY_AB 0x196
#define KEY_NEXT 0x197
#define KEY_RESTART 0x198
#define KEY_SLOW 0x199
#define KEY_SHUFFLE 0x19a
#define KEY_BREAK 0x19b
#define KEY_PREVIOUS 0x19c
#define KEY_DIGITS 0x19d
#define KEY_TEEN 0x19e
#define KEY_TWEN 0x19f
#define KEY_VIDEOPHONE 0x1a0 /* Media Select Video Phone */
#define KEY_GAMES 0x1a1 /* Media Select Games */
#define KEY_ZOOMIN 0x1a2 /* AC Zoom In */
#define KEY_ZOOMOUT 0x1a3 /* AC Zoom Out */
#define KEY_ZOOMRESET 0x1a4 /* AC Zoom */
#define KEY_WORDPROCESSOR 0x1a5 /* AL Word Processor */
#define KEY_EDITOR 0x1a6 /* AL Text Editor */
#define KEY_SPREADSHEET 0x1a7 /* AL Spreadsheet */
#define KEY_GRAPHICSEDITOR 0x1a8 /* AL Graphics Editor */
#define KEY_PRESENTATION 0x1a9 /* AL Presentation App */
#define KEY_DATABASE 0x1aa /* AL Database App */
#define KEY_NEWS 0x1ab /* AL Newsreader */
#define KEY_VOICEMAIL 0x1ac /* AL Voicemail */
#define KEY_ADDRESSBOOK 0x1ad /* AL Contacts/Address Book */
#define KEY_MESSENGER 0x1ae /* AL Instant Messaging */
#define KEY_DISPLAYTOGGLE 0x1af /* Turn display (LCD) on and off */
#define KEY_SPELLCHECK 0x1b0 /* AL Spell Check */
#define KEY_LOGOFF 0x1b1 /* AL Logoff */
#define KEY_DOLLAR 0x1b2
#define KEY_EURO 0x1b3
#define KEY_FRAMEBACK 0x1b4 /* Consumer - transport controls */
#define KEY_FRAMEFORWARD 0x1b5
#define KEY_CONTEXT_MENU 0x1b6 /* GenDesc - system context menu */
#define KEY_DEL_EOL 0x1c0
#define KEY_DEL_EOS 0x1c1
#define KEY_INS_LINE 0x1c2
#define KEY_DEL_LINE 0x1c3
#define KEY_FN 0x1d0
#define KEY_FN_ESC 0x1d1
#define KEY_FN_F1 0x1d2
#define KEY_FN_F2 0x1d3
#define KEY_FN_F3 0x1d4
#define KEY_FN_F4 0x1d5
#define KEY_FN_F5 0x1d6
#define KEY_FN_F6 0x1d7
#define KEY_FN_F7 0x1d8
#define KEY_FN_F8 0x1d9
#define KEY_FN_F9 0x1da
#define KEY_FN_F10 0x1db
#define KEY_FN_F11 0x1dc
#define KEY_FN_F12 0x1dd
#define KEY_FN_1 0x1de
#define KEY_FN_2 0x1df
#define KEY_FN_D 0x1e0
#define KEY_FN_E 0x1e1
#define KEY_FN_F 0x1e2
#define KEY_FN_S 0x1e3
#define KEY_FN_B 0x1e4
#define KEY_BRL_DOT1 0x1f1
#define KEY_BRL_DOT2 0x1f2
#define KEY_BRL_DOT3 0x1f3
#define KEY_BRL_DOT4 0x1f4
#define KEY_BRL_DOT5 0x1f5
#define KEY_BRL_DOT6 0x1f6
#define KEY_BRL_DOT7 0x1f7
#define KEY_BRL_DOT8 0x1f8
#define KEY_BRL_DOT9 0x1f9
#define KEY_BRL_DOT10 0x1fa
/* We avoid low common keys in module aliases so they don't get huge. */
#define KEY_MIN_INTERESTING KEY_MUTE
#define KEY_MAX 0x1ff
#define KEY_CNT (KEY_MAX+1)
/*
* Relative axes
*/
#define REL_X 0x00
#define REL_Y 0x01
#define REL_Z 0x02
#define REL_RX 0x03
#define REL_RY 0x04
#define REL_RZ 0x05
#define REL_HWHEEL 0x06
#define REL_DIAL 0x07
#define REL_WHEEL 0x08
#define REL_MISC 0x09
#define REL_MAX 0x0f
#define REL_CNT (REL_MAX+1)
/*
* Absolute axes
*/
#define ABS_X 0x00
#define ABS_Y 0x01
#define ABS_Z 0x02
#define ABS_RX 0x03
#define ABS_RY 0x04
#define ABS_RZ 0x05
#define ABS_THROTTLE 0x06
#define ABS_RUDDER 0x07
#define ABS_WHEEL 0x08
#define ABS_GAS 0x09
#define ABS_BRAKE 0x0a
#define ABS_HAT0X 0x10
#define ABS_HAT0Y 0x11
#define ABS_HAT1X 0x12
#define ABS_HAT1Y 0x13
#define ABS_HAT2X 0x14
#define ABS_HAT2Y 0x15
#define ABS_HAT3X 0x16
#define ABS_HAT3Y 0x17
#define ABS_PRESSURE 0x18
#define ABS_DISTANCE 0x19
#define ABS_TILT_X 0x1a
#define ABS_TILT_Y 0x1b
#define ABS_TOOL_WIDTH 0x1c
#define ABS_VOLUME 0x20
#define ABS_MISC 0x28
#define ABS_MAX 0x3f
#define ABS_CNT (ABS_MAX+1)
/*
* Switch events
*/
#define SW_LID 0x00 /* set = lid shut */
#define SW_TABLET_MODE 0x01 /* set = tablet mode */
#define SW_HEADPHONE_INSERT 0x02 /* set = inserted */
#define SW_RADIO 0x03 /* set = radio enabled */
#define SW_MAX 0x0f
#define SW_CNT (SW_MAX+1)
/*
* Misc events
*/
#define MSC_SERIAL 0x00
#define MSC_PULSELED 0x01
#define MSC_GESTURE 0x02
#define MSC_RAW 0x03
#define MSC_SCAN 0x04
#define MSC_MAX 0x07
#define MSC_CNT (MSC_MAX+1)
/*
* LEDs
*/
#define LED_NUML 0x00
#define LED_CAPSL 0x01
#define LED_SCROLLL 0x02
#define LED_COMPOSE 0x03
#define LED_KANA 0x04
#define LED_SLEEP 0x05
#define LED_SUSPEND 0x06
#define LED_MUTE 0x07
#define LED_MISC 0x08
#define LED_MAIL 0x09
#define LED_CHARGING 0x0a
#define LED_MAX 0x0f
#define LED_CNT (LED_MAX+1)
/*
* Autorepeat values
*/
#define REP_DELAY 0x00
#define REP_PERIOD 0x01
#define REP_MAX 0x01
/*
* Sounds
*/
#define SND_CLICK 0x00
#define SND_BELL 0x01
#define SND_TONE 0x02
#define SND_MAX 0x07
#define SND_CNT (SND_MAX+1)
/*
* IDs.
*/
#define ID_BUS 0
#define ID_VENDOR 1
#define ID_PRODUCT 2
#define ID_VERSION 3
#define BUS_PCI 0x01
#define BUS_ISAPNP 0x02
#define BUS_USB 0x03
#define BUS_HIL 0x04
#define BUS_BLUETOOTH 0x05
#define BUS_VIRTUAL 0x06
#define BUS_ISA 0x10
#define BUS_I8042 0x11
#define BUS_XTKBD 0x12
#define BUS_RS232 0x13
#define BUS_GAMEPORT 0x14
#define BUS_PARPORT 0x15
#define BUS_AMIGA 0x16
#define BUS_ADB 0x17
#define BUS_I2C 0x18
#define BUS_HOST 0x19
#define BUS_GSC 0x1A
#define BUS_ATARI 0x1B
/*
* Values describing the status of a force-feedback effect
*/
#define FF_STATUS_STOPPED 0x00
#define FF_STATUS_PLAYING 0x01
#define FF_STATUS_MAX 0x01
/*
* Structures used in ioctls to upload effects to a device
* They are pieces of a bigger structure (called ff_effect)
*/
/*
* All duration values are expressed in ms. Values above 32767 ms (0x7fff)
* should not be used and have unspecified results.
*/
/**
* struct ff_replay - defines scheduling of the force-feedback effect
* @length: duration of the effect
* @delay: delay before effect should start playing
*/
struct ff_replay {
__u16 length;
__u16 delay;
};
/**
* struct ff_trigger - defines what triggers the force-feedback effect
* @button: number of the button triggering the effect
* @interval: controls how soon the effect can be re-triggered
*/
struct ff_trigger {
__u16 button;
__u16 interval;
};
/**
* struct ff_envelope - generic force-feedback effect envelope
* @attack_length: duration of the attack (ms)
* @attack_level: level at the beginning of the attack
* @fade_length: duration of fade (ms)
* @fade_level: level at the end of fade
*
* The @attack_level and @fade_level are absolute values; when applying
* envelope force-feedback core will convert to positive/negative
* value based on polarity of the default level of the effect.
* Valid range for the attack and fade levels is 0x0000 - 0x7fff
*/
struct ff_envelope {
__u16 attack_length;
__u16 attack_level;
__u16 fade_length;
__u16 fade_level;
};
/**
* struct ff_constant_effect - defines parameters of a constant force-feedback effect
* @level: strength of the effect; may be negative
* @envelope: envelope data
*/
struct ff_constant_effect {
__s16 level;
struct ff_envelope envelope;
};
/**
* struct ff_ramp_effect - defines parameters of a ramp force-feedback effect
* @start_level: beginning strength of the effect; may be negative
* @end_level: final strength of the effect; may be negative
* @envelope: envelope data
*/
struct ff_ramp_effect {
__s16 start_level;
__s16 end_level;
struct ff_envelope envelope;
};
/**
* struct ff_condition_effect - defines a spring or friction force-feedback effect
* @right_saturation: maximum level when joystick moved all way to the right
* @left_saturation: same for the left side
* @right_coeff: controls how fast the force grows when the joystick moves
* to the right
* @left_coeff: same for the left side
* @deadband: size of the dead zone, where no force is produced
* @center: position of the dead zone
*/
struct ff_condition_effect {
__u16 right_saturation;
__u16 left_saturation;
__s16 right_coeff;
__s16 left_coeff;
__u16 deadband;
__s16 center;
};
/**
* struct ff_periodic_effect - defines parameters of a periodic force-feedback effect
* @waveform: kind of the effect (wave)
* @period: period of the wave (ms)
* @magnitude: peak value
* @offset: mean value of the wave (roughly)
* @phase: 'horizontal' shift
* @envelope: envelope data
* @custom_len: number of samples (FF_CUSTOM only)
* @custom_data: buffer of samples (FF_CUSTOM only)
*
* Known waveforms - FF_SQUARE, FF_TRIANGLE, FF_SINE, FF_SAW_UP,
* FF_SAW_DOWN, FF_CUSTOM. The exact syntax FF_CUSTOM is undefined
* for the time being as no driver supports it yet.
*
* Note: the data pointed by custom_data is copied by the driver.
* You can therefore dispose of the memory after the upload/update.
*/
struct ff_periodic_effect {
__u16 waveform;
__u16 period;
__s16 magnitude;
__s16 offset;
__u16 phase;
struct ff_envelope envelope;
__u32 custom_len;
__s16 *custom_data;
};
/**
* struct ff_rumble_effect - defines parameters of a periodic force-feedback effect
* @strong_magnitude: magnitude of the heavy motor
* @weak_magnitude: magnitude of the light one
*
* Some rumble pads have two motors of different weight. Strong_magnitude
* represents the magnitude of the vibration generated by the heavy one.
*/
struct ff_rumble_effect {
__u16 strong_magnitude;
__u16 weak_magnitude;
};
/**
* struct ff_effect - defines force feedback effect
* @type: type of the effect (FF_CONSTANT, FF_PERIODIC, FF_RAMP, FF_SPRING,
* FF_FRICTION, FF_DAMPER, FF_RUMBLE, FF_INERTIA, or FF_CUSTOM)
* @id: an unique id assigned to an effect
* @direction: direction of the effect
* @trigger: trigger conditions (struct ff_trigger)
* @replay: scheduling of the effect (struct ff_replay)
* @u: effect-specific structure (one of ff_constant_effect, ff_ramp_effect,
* ff_periodic_effect, ff_condition_effect, ff_rumble_effect) further
* defining effect parameters
*
* This structure is sent through ioctl from the application to the driver.
* To create a new effect application should set its @id to -1; the kernel
* will return assigned @id which can later be used to update or delete
* this effect.
*
* Direction of the effect is encoded as follows:
* 0 deg -> 0x0000 (down)
* 90 deg -> 0x4000 (left)
* 180 deg -> 0x8000 (up)
* 270 deg -> 0xC000 (right)
*/
struct ff_effect {
__u16 type;
__s16 id;
__u16 direction;
struct ff_trigger trigger;
struct ff_replay replay;
union {
struct ff_constant_effect constant;
struct ff_ramp_effect ramp;
struct ff_periodic_effect periodic;
struct ff_condition_effect condition[2]; /* One for each axis */
struct ff_rumble_effect rumble;
} u;
};
/*
* Force feedback effect types
*/
#define FF_RUMBLE 0x50
#define FF_PERIODIC 0x51
#define FF_CONSTANT 0x52
#define FF_SPRING 0x53
#define FF_FRICTION 0x54
#define FF_DAMPER 0x55
#define FF_INERTIA 0x56
#define FF_RAMP 0x57
#define FF_EFFECT_MIN FF_RUMBLE
#define FF_EFFECT_MAX FF_RAMP
/*
* Force feedback periodic effect types
*/
#define FF_SQUARE 0x58
#define FF_TRIANGLE 0x59
#define FF_SINE 0x5a
#define FF_SAW_UP 0x5b
#define FF_SAW_DOWN 0x5c
#define FF_CUSTOM 0x5d
#define FF_WAVEFORM_MIN FF_SQUARE
#define FF_WAVEFORM_MAX FF_CUSTOM
/*
* Set ff device properties
*/
#define FF_GAIN 0x60
#define FF_AUTOCENTER 0x61
#define FF_MAX 0x7f
#define FF_CNT (FF_MAX+1)
#ifdef __KERNEL__
/*
* In-kernel definitions.
*/
#include <linux/device.h>
#include <linux/fs.h>
#include <linux/timer.h>
#include <linux/mod_devicetable.h>
/**
* struct input_dev - represents an input device
* @name: name of the device
* @phys: physical path to the device in the system hierarchy
* @uniq: unique identification code for the device (if device has it)
* @id: id of the device (struct input_id)
* @evbit: bitmap of types of events supported by the device (EV_KEY,
* EV_REL, etc.)
* @keybit: bitmap of keys/buttons this device has
* @relbit: bitmap of relative axes for the device
* @absbit: bitmap of absolute axes for the device
* @mscbit: bitmap of miscellaneous events supported by the device
* @ledbit: bitmap of leds present on the device
* @sndbit: bitmap of sound effects supported by the device
* @ffbit: bitmap of force feedback effects supported by the device
* @swbit: bitmap of switches present on the device
* @keycodemax: size of keycode table
* @keycodesize: size of elements in keycode table
* @keycode: map of scancodes to keycodes for this device
* @setkeycode: optional method to alter current keymap, used to implement
* sparse keymaps. If not supplied default mechanism will be used
* @getkeycode: optional method to retrieve current keymap. If not supplied
* default mechanism will be used
* @ff: force feedback structure associated with the device if device
* supports force feedback effects
* @repeat_key: stores key code of the last key pressed; used to implement
* software autorepeat
* @timer: timer for software autorepeat
* @sync: set to 1 when there were no new events since last EV_SYNC
* @abs: current values for reports from absolute axes
* @rep: current values for autorepeat parameters (delay, rate)
* @key: reflects current state of device's keys/buttons
* @led: reflects current state of device's LEDs
* @snd: reflects current state of sound effects
* @sw: reflects current state of device's switches
* @absmax: maximum values for events coming from absolute axes
* @absmin: minimum values for events coming from absolute axes
* @absfuzz: describes noisiness for axes
* @absflat: size of the center flat position (used by joydev)
* @open: this method is called when the very first user calls
* input_open_device(). The driver must prepare the device
* to start generating events (start polling thread,
* request an IRQ, submit URB, etc.)
* @close: this method is called when the very last user calls
* input_close_device().
* @flush: purges the device. Most commonly used to get rid of force
* feedback effects loaded into the device when disconnecting
* from it
* @event: event handler for events sent _to_ the device, like EV_LED
* or EV_SND. The device is expected to carry out the requested
* action (turn on a LED, play sound, etc.) The call is protected
* by @event_lock and must not sleep
* @grab: input handle that currently has the device grabbed (via
* EVIOCGRAB ioctl). When a handle grabs a device it becomes sole
* recipient for all input events coming from the device
* @event_lock: this spinlock is is taken when input core receives
* and processes a new event for the device (in input_event()).
* Code that accesses and/or modifies parameters of a device
* (such as keymap or absmin, absmax, absfuzz, etc.) after device
* has been registered with input core must take this lock.
* @mutex: serializes calls to open(), close() and flush() methods
* @users: stores number of users (input handlers) that opened this
* device. It is used by input_open_device() and input_close_device()
* to make sure that dev->open() is only called when the first
* user opens device and dev->close() is called when the very
* last user closes the device
* @going_away: marks devices that are in a middle of unregistering and
* causes input_open_device*() fail with -ENODEV.
* @dev: driver model's view of this device
* @h_list: list of input handles associated with the device. When
* accessing the list dev->mutex must be held
* @node: used to place the device onto input_dev_list
*/
struct input_dev {
const char *name;
const char *phys;
const char *uniq;
struct input_id id;
unsigned long evbit[BITS_TO_LONGS(EV_CNT)];
unsigned long keybit[BITS_TO_LONGS(KEY_CNT)];
unsigned long relbit[BITS_TO_LONGS(REL_CNT)];
unsigned long absbit[BITS_TO_LONGS(ABS_CNT)];
unsigned long mscbit[BITS_TO_LONGS(MSC_CNT)];
unsigned long ledbit[BITS_TO_LONGS(LED_CNT)];
unsigned long sndbit[BITS_TO_LONGS(SND_CNT)];
unsigned long ffbit[BITS_TO_LONGS(FF_CNT)];
unsigned long swbit[BITS_TO_LONGS(SW_CNT)];
unsigned int keycodemax;
unsigned int keycodesize;
void *keycode;
int (*setkeycode)(struct input_dev *dev, int scancode, int keycode);
int (*getkeycode)(struct input_dev *dev, int scancode, int *keycode);
struct ff_device *ff;
unsigned int repeat_key;
struct timer_list timer;
int sync;
int abs[ABS_MAX + 1];
int rep[REP_MAX + 1];
unsigned long key[BITS_TO_LONGS(KEY_CNT)];
unsigned long led[BITS_TO_LONGS(LED_CNT)];
unsigned long snd[BITS_TO_LONGS(SND_CNT)];
unsigned long sw[BITS_TO_LONGS(SW_CNT)];
int absmax[ABS_MAX + 1];
int absmin[ABS_MAX + 1];
int absfuzz[ABS_MAX + 1];
int absflat[ABS_MAX + 1];
int (*open)(struct input_dev *dev);
void (*close)(struct input_dev *dev);
int (*flush)(struct input_dev *dev, struct file *file);
int (*event)(struct input_dev *dev, unsigned int type, unsigned int code, int value);
struct input_handle *grab;
spinlock_t event_lock;
struct mutex mutex;
unsigned int users;
int going_away;
struct device dev;
struct list_head h_list;
struct list_head node;
};
#define to_input_dev(d) container_of(d, struct input_dev, dev)
/*
* Verify that we are in sync with input_device_id mod_devicetable.h #defines
*/
#if EV_MAX != INPUT_DEVICE_ID_EV_MAX
#error "EV_MAX and INPUT_DEVICE_ID_EV_MAX do not match"
#endif
#if KEY_MIN_INTERESTING != INPUT_DEVICE_ID_KEY_MIN_INTERESTING
#error "KEY_MIN_INTERESTING and INPUT_DEVICE_ID_KEY_MIN_INTERESTING do not match"
#endif
#if KEY_MAX != INPUT_DEVICE_ID_KEY_MAX
#error "KEY_MAX and INPUT_DEVICE_ID_KEY_MAX do not match"
#endif
#if REL_MAX != INPUT_DEVICE_ID_REL_MAX
#error "REL_MAX and INPUT_DEVICE_ID_REL_MAX do not match"
#endif
#if ABS_MAX != INPUT_DEVICE_ID_ABS_MAX
#error "ABS_MAX and INPUT_DEVICE_ID_ABS_MAX do not match"
#endif
#if MSC_MAX != INPUT_DEVICE_ID_MSC_MAX
#error "MSC_MAX and INPUT_DEVICE_ID_MSC_MAX do not match"
#endif
#if LED_MAX != INPUT_DEVICE_ID_LED_MAX
#error "LED_MAX and INPUT_DEVICE_ID_LED_MAX do not match"
#endif
#if SND_MAX != INPUT_DEVICE_ID_SND_MAX
#error "SND_MAX and INPUT_DEVICE_ID_SND_MAX do not match"
#endif
#if FF_MAX != INPUT_DEVICE_ID_FF_MAX
#error "FF_MAX and INPUT_DEVICE_ID_FF_MAX do not match"
#endif
#if SW_MAX != INPUT_DEVICE_ID_SW_MAX
#error "SW_MAX and INPUT_DEVICE_ID_SW_MAX do not match"
#endif
#define INPUT_DEVICE_ID_MATCH_DEVICE \
(INPUT_DEVICE_ID_MATCH_BUS | INPUT_DEVICE_ID_MATCH_VENDOR | INPUT_DEVICE_ID_MATCH_PRODUCT)
#define INPUT_DEVICE_ID_MATCH_DEVICE_AND_VERSION \
(INPUT_DEVICE_ID_MATCH_DEVICE | INPUT_DEVICE_ID_MATCH_VERSION)
struct input_handle;
/**
* struct input_handler - implements one of interfaces for input devices
* @private: driver-specific data
* @event: event handler. This method is being called by input core with
* interrupts disabled and dev->event_lock spinlock held and so
* it may not sleep
* @connect: called when attaching a handler to an input device
* @disconnect: disconnects a handler from input device
* @start: starts handler for given handle. This function is called by
* input core right after connect() method and also when a process
* that "grabbed" a device releases it
* @fops: file operations this driver implements
* @minor: beginning of range of 32 minors for devices this driver
* can provide
* @name: name of the handler, to be shown in /proc/bus/input/handlers
* @id_table: pointer to a table of input_device_ids this driver can
* handle
* @blacklist: pointer to a table of input_device_ids this driver should
* ignore even if they match @id_table
* @h_list: list of input handles associated with the handler
* @node: for placing the driver onto input_handler_list
*
* Input handlers attach to input devices and create input handles. There
* are likely several handlers attached to any given input device at the
* same time. All of them will get their copy of input event generated by
* the device.
*
* Note that input core serializes calls to connect() and disconnect()
* methods.
*/
struct input_handler {
void *private;
void (*event)(struct input_handle *handle, unsigned int type, unsigned int code, int value);
int (*connect)(struct input_handler *handler, struct input_dev *dev, const struct input_device_id *id);
void (*disconnect)(struct input_handle *handle);
void (*start)(struct input_handle *handle);
const struct file_operations *fops;
int minor;
const char *name;
const struct input_device_id *id_table;
const struct input_device_id *blacklist;
struct list_head h_list;
struct list_head node;
};
/**
* struct input_handle - links input device with an input handler
* @private: handler-specific data
* @open: counter showing whether the handle is 'open', i.e. should deliver
* events from its device
* @name: name given to the handle by handler that created it
* @dev: input device the handle is attached to
* @handler: handler that works with the device through this handle
* @d_node: used to put the handle on device's list of attached handles
* @h_node: used to put the handle on handler's list of handles from which
* it gets events
*/
struct input_handle {
void *private;
int open;
const char *name;
struct input_dev *dev;
struct input_handler *handler;
struct list_head d_node;
struct list_head h_node;
};
#define to_dev(n) container_of(n, struct input_dev, node)
#define to_handler(n) container_of(n, struct input_handler, node)
#define to_handle(n) container_of(n, struct input_handle, d_node)
#define to_handle_h(n) container_of(n, struct input_handle, h_node)
struct input_dev *input_allocate_device(void);
void input_free_device(struct input_dev *dev);
static inline struct input_dev *input_get_device(struct input_dev *dev)
{
return dev ? to_input_dev(get_device(&dev->dev)) : NULL;
}
static inline void input_put_device(struct input_dev *dev)
{
if (dev)
put_device(&dev->dev);
}
static inline void *input_get_drvdata(struct input_dev *dev)
{
return dev_get_drvdata(&dev->dev);
}
static inline void input_set_drvdata(struct input_dev *dev, void *data)
{
dev_set_drvdata(&dev->dev, data);
}
int __must_check input_register_device(struct input_dev *);
void input_unregister_device(struct input_dev *);
int __must_check input_register_handler(struct input_handler *);
void input_unregister_handler(struct input_handler *);
int input_register_handle(struct input_handle *);
void input_unregister_handle(struct input_handle *);
int input_grab_device(struct input_handle *);
void input_release_device(struct input_handle *);
int input_open_device(struct input_handle *);
void input_close_device(struct input_handle *);
int input_flush_device(struct input_handle* handle, struct file* file);
void input_event(struct input_dev *dev, unsigned int type, unsigned int code, int value);
void input_inject_event(struct input_handle *handle, unsigned int type, unsigned int code, int value);
static inline void input_report_key(struct input_dev *dev, unsigned int code, int value)
{
input_event(dev, EV_KEY, code, !!value);
}
static inline void input_report_rel(struct input_dev *dev, unsigned int code, int value)
{
input_event(dev, EV_REL, code, value);
}
static inline void input_report_abs(struct input_dev *dev, unsigned int code, int value)
{
input_event(dev, EV_ABS, code, value);
}
static inline void input_report_ff_status(struct input_dev *dev, unsigned int code, int value)
{
input_event(dev, EV_FF_STATUS, code, value);
}
static inline void input_report_switch(struct input_dev *dev, unsigned int code, int value)
{
input_event(dev, EV_SW, code, !!value);
}
static inline void input_sync(struct input_dev *dev)
{
input_event(dev, EV_SYN, SYN_REPORT, 0);
}
void input_set_capability(struct input_dev *dev, unsigned int type, unsigned int code);
static inline void input_set_abs_params(struct input_dev *dev, int axis, int min, int max, int fuzz, int flat)
{
dev->absmin[axis] = min;
dev->absmax[axis] = max;
dev->absfuzz[axis] = fuzz;
dev->absflat[axis] = flat;
dev->absbit[BIT_WORD(axis)] |= BIT_MASK(axis);
}
int input_get_keycode(struct input_dev *dev, int scancode, int *keycode);
int input_set_keycode(struct input_dev *dev, int scancode, int keycode);
extern struct class input_class;
/**
* struct ff_device - force-feedback part of an input device
* @upload: Called to upload an new effect into device
* @erase: Called to erase an effect from device
* @playback: Called to request device to start playing specified effect
* @set_gain: Called to set specified gain
* @set_autocenter: Called to auto-center device
* @destroy: called by input core when parent input device is being
* destroyed
* @private: driver-specific data, will be freed automatically
* @ffbit: bitmap of force feedback capabilities truly supported by
* device (not emulated like ones in input_dev->ffbit)
* @mutex: mutex for serializing access to the device
* @max_effects: maximum number of effects supported by device
* @effects: pointer to an array of effects currently loaded into device
* @effect_owners: array of effect owners; when file handle owning
* an effect gets closed the effect is automatically erased
*
* Every force-feedback device must implement upload() and playback()
* methods; erase() is optional. set_gain() and set_autocenter() need
* only be implemented if driver sets up FF_GAIN and FF_AUTOCENTER
* bits.
*/
struct ff_device {
int (*upload)(struct input_dev *dev, struct ff_effect *effect,
struct ff_effect *old);
int (*erase)(struct input_dev *dev, int effect_id);
int (*playback)(struct input_dev *dev, int effect_id, int value);
void (*set_gain)(struct input_dev *dev, u16 gain);
void (*set_autocenter)(struct input_dev *dev, u16 magnitude);
void (*destroy)(struct ff_device *);
void *private;
unsigned long ffbit[BITS_TO_LONGS(FF_CNT)];
struct mutex mutex;
int max_effects;
struct ff_effect *effects;
struct file *effect_owners[];
};
int input_ff_create(struct input_dev *dev, int max_effects);
void input_ff_destroy(struct input_dev *dev);
int input_ff_event(struct input_dev *dev, unsigned int type, unsigned int code, int value);
int input_ff_upload(struct input_dev *dev, struct ff_effect *effect, struct file *file);
int input_ff_erase(struct input_dev *dev, int effect_id, struct file *file);
int input_ff_create_memless(struct input_dev *dev, void *data,
int (*play_effect)(struct input_dev *, void *, struct ff_effect *));
#endif
#endif
