aboutsummaryrefslogblamecommitdiffstats
path: root/include/linux/8250_pci.h
blob: 3209dd46ea7d98ce0f846d07aad0222e39764606 (plain) (tree)




































                                                                         
/*
 * Definitions for PCI support.
 */
#define FL_BASE_MASK		0x0007
#define FL_BASE0		0x0000
#define FL_BASE1		0x0001
#define FL_BASE2		0x0002
#define FL_BASE3		0x0003
#define FL_BASE4		0x0004
#define FL_GET_BASE(x)		(x & FL_BASE_MASK)

/* Use successive BARs (PCI base address registers),
   else use offset into some specified BAR */
#define FL_BASE_BARS		0x0008

/* do not assign an irq */
#define FL_NOIRQ		0x0080

/* Use the Base address register size to cap number of ports */
#define FL_REGION_SZ_CAP	0x0100

struct pciserial_board {
	unsigned int flags;
	unsigned int num_ports;
	unsigned int base_baud;
	unsigned int uart_offset;
	unsigned int reg_shift;
	unsigned int first_offset;
};

struct serial_private;

struct serial_private *
pciserial_init_ports(struct pci_dev *dev, struct pciserial_board *board);
void pciserial_remove_ports(struct serial_private *priv);
void pciserial_suspend_ports(struct serial_private *priv);
void pciserial_resume_ports(struct serial_private *priv);
24'>324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481
/* hermes.h
 *
 * Driver core for the "Hermes" wireless MAC controller, as used in
 * the Lucent Orinoco and Cabletron RoamAbout cards. It should also
 * work on the hfa3841 and hfa3842 MAC controller chips used in the
 * Prism I & II chipsets.
 *
 * This is not a complete driver, just low-level access routines for
 * the MAC controller itself.
 *
 * Based on the prism2 driver from Absolute Value Systems' linux-wlan
 * project, the Linux wvlan_cs driver, Lucent's HCF-Light
 * (wvlan_hcf.c) library, and the NetBSD wireless driver.
 *
 * Copyright (C) 2000, David Gibson, Linuxcare Australia.
 * (C) Copyright David Gibson, IBM Corp. 2001-2003.
 *
 * Portions taken from hfa384x.h, Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved.
 *
 * This file distributed under the GPL, version 2.
 */

#ifndef _HERMES_H
#define _HERMES_H

/* Notes on locking:
 *
 * As a module of low level hardware access routines, there is no
 * locking. Users of this module should ensure that they serialize
 * access to the hermes_t structure, and to the hardware
*/

#include <linux/delay.h>
#include <linux/if_ether.h>
#include <asm/byteorder.h>

/*
 * Limits and constants
 */
#define		HERMES_ALLOC_LEN_MIN		(4)
#define		HERMES_ALLOC_LEN_MAX		(2400)
#define		HERMES_LTV_LEN_MAX		(34)
#define		HERMES_BAP_DATALEN_MAX		(4096)
#define		HERMES_BAP_OFFSET_MAX		(4096)
#define		HERMES_PORTID_MAX		(7)
#define		HERMES_NUMPORTS_MAX		(HERMES_PORTID_MAX+1)
#define		HERMES_PDR_LEN_MAX		(260)	/* in bytes, from EK */
#define		HERMES_PDA_RECS_MAX		(200)	/* a guess */
#define		HERMES_PDA_LEN_MAX		(1024)	/* in bytes, from EK */
#define		HERMES_SCANRESULT_MAX		(35)
#define		HERMES_CHINFORESULT_MAX		(8)
#define		HERMES_MAX_MULTICAST		(16)
#define		HERMES_MAGIC			(0x7d1f)

/*
 * Hermes register offsets
 */
#define		HERMES_CMD			(0x00)
#define		HERMES_PARAM0			(0x02)
#define		HERMES_PARAM1			(0x04)
#define		HERMES_PARAM2			(0x06)
#define		HERMES_STATUS			(0x08)
#define		HERMES_RESP0			(0x0A)
#define		HERMES_RESP1			(0x0C)
#define		HERMES_RESP2			(0x0E)
#define		HERMES_INFOFID			(0x10)
#define		HERMES_RXFID			(0x20)
#define		HERMES_ALLOCFID			(0x22)
#define		HERMES_TXCOMPLFID		(0x24)
#define		HERMES_SELECT0			(0x18)
#define		HERMES_OFFSET0			(0x1C)
#define		HERMES_DATA0			(0x36)
#define		HERMES_SELECT1			(0x1A)
#define		HERMES_OFFSET1			(0x1E)
#define		HERMES_DATA1			(0x38)
#define		HERMES_EVSTAT			(0x30)
#define		HERMES_INTEN			(0x32)
#define		HERMES_EVACK			(0x34)
#define		HERMES_CONTROL			(0x14)
#define		HERMES_SWSUPPORT0		(0x28)
#define		HERMES_SWSUPPORT1		(0x2A)
#define		HERMES_SWSUPPORT2		(0x2C)
#define		HERMES_AUXPAGE			(0x3A)
#define		HERMES_AUXOFFSET		(0x3C)
#define		HERMES_AUXDATA			(0x3E)

/*
 * CMD register bitmasks
 */
#define		HERMES_CMD_BUSY			(0x8000)
#define		HERMES_CMD_AINFO		(0x7f00)
#define		HERMES_CMD_MACPORT		(0x0700)
#define		HERMES_CMD_RECL			(0x0100)
#define		HERMES_CMD_WRITE		(0x0100)
#define		HERMES_CMD_PROGMODE		(0x0300)
#define		HERMES_CMD_CMDCODE		(0x003f)

/*
 * STATUS register bitmasks
 */
#define		HERMES_STATUS_RESULT		(0x7f00)
#define		HERMES_STATUS_CMDCODE		(0x003f)

/*
 * OFFSET register bitmasks
 */
#define		HERMES_OFFSET_BUSY		(0x8000)
#define		HERMES_OFFSET_ERR		(0x4000)
#define		HERMES_OFFSET_DATAOFF		(0x0ffe)

/*
 * Event register bitmasks (INTEN, EVSTAT, EVACK)
 */
#define		HERMES_EV_TICK			(0x8000)
#define		HERMES_EV_WTERR			(0x4000)
#define		HERMES_EV_INFDROP		(0x2000)
#define		HERMES_EV_INFO			(0x0080)
#define		HERMES_EV_DTIM			(0x0020)
#define		HERMES_EV_CMD			(0x0010)
#define		HERMES_EV_ALLOC			(0x0008)
#define		HERMES_EV_TXEXC			(0x0004)
#define		HERMES_EV_TX			(0x0002)
#define		HERMES_EV_RX			(0x0001)

/*
 * Command codes
 */
/*--- Controller Commands ----------------------------*/
#define		HERMES_CMD_INIT			(0x0000)
#define		HERMES_CMD_ENABLE		(0x0001)
#define		HERMES_CMD_DISABLE		(0x0002)
#define		HERMES_CMD_DIAG			(0x0003)

/*--- Buffer Mgmt Commands ---------------------------*/
#define		HERMES_CMD_ALLOC		(0x000A)
#define		HERMES_CMD_TX			(0x000B)

/*--- Regulate Commands ------------------------------*/
#define		HERMES_CMD_NOTIFY		(0x0010)
#define		HERMES_CMD_INQUIRE		(0x0011)

/*--- Configure Commands -----------------------------*/
#define		HERMES_CMD_ACCESS		(0x0021)
#define		HERMES_CMD_DOWNLD		(0x0022)

/*--- Serial I/O Commands ----------------------------*/
#define		HERMES_CMD_READMIF		(0x0030)
#define		HERMES_CMD_WRITEMIF		(0x0031)

/*--- Debugging Commands -----------------------------*/
#define 	HERMES_CMD_TEST			(0x0038)


/* Test command arguments */
#define		HERMES_TEST_SET_CHANNEL		0x0800
#define		HERMES_TEST_MONITOR		0x0b00
#define		HERMES_TEST_STOP		0x0f00

/* Authentication algorithms */
#define		HERMES_AUTH_OPEN		1
#define		HERMES_AUTH_SHARED_KEY		2

/* WEP settings */
#define		HERMES_WEP_PRIVACY_INVOKED	0x0001
#define		HERMES_WEP_EXCL_UNENCRYPTED	0x0002
#define		HERMES_WEP_HOST_ENCRYPT		0x0010
#define		HERMES_WEP_HOST_DECRYPT		0x0080

/* Symbol hostscan options */
#define		HERMES_HOSTSCAN_SYMBOL_5SEC	0x0001
#define		HERMES_HOSTSCAN_SYMBOL_ONCE	0x0002
#define		HERMES_HOSTSCAN_SYMBOL_PASSIVE	0x0040
#define		HERMES_HOSTSCAN_SYMBOL_BCAST	0x0080

/*
 * Frame structures and constants
 */

#define HERMES_DESCRIPTOR_OFFSET	0
#define HERMES_802_11_OFFSET		(14)
#define HERMES_802_3_OFFSET		(14+32)
#define HERMES_802_2_OFFSET		(14+32+14)

#define HERMES_RXSTAT_ERR		(0x0003)
#define	HERMES_RXSTAT_BADCRC		(0x0001)
#define	HERMES_RXSTAT_UNDECRYPTABLE	(0x0002)
#define	HERMES_RXSTAT_MACPORT		(0x0700)
#define HERMES_RXSTAT_PCF		(0x1000)	/* Frame was received in CF period */
#define	HERMES_RXSTAT_MSGTYPE		(0xE000)
#define	HERMES_RXSTAT_1042		(0x2000)	/* RFC-1042 frame */
#define	HERMES_RXSTAT_TUNNEL		(0x4000)	/* bridge-tunnel encoded frame */
#define	HERMES_RXSTAT_WMP		(0x6000)	/* Wavelan-II Management Protocol frame */

struct hermes_tx_descriptor {
	u16 status;
	u16 reserved1;
	u16 reserved2;
	u32 sw_support;
	u8 retry_count;
	u8 tx_rate;
	u16 tx_control;	
} __attribute__ ((packed));

#define HERMES_TXSTAT_RETRYERR		(0x0001)
#define HERMES_TXSTAT_AGEDERR		(0x0002)
#define HERMES_TXSTAT_DISCON		(0x0004)
#define HERMES_TXSTAT_FORMERR		(0x0008)

#define HERMES_TXCTRL_TX_OK		(0x0002)	/* ?? interrupt on Tx complete */
#define HERMES_TXCTRL_TX_EX		(0x0004)	/* ?? interrupt on Tx exception */
#define HERMES_TXCTRL_802_11		(0x0008)	/* We supply 802.11 header */
#define HERMES_TXCTRL_ALT_RTRY		(0x0020)

/* Inquiry constants and data types */

#define HERMES_INQ_TALLIES		(0xF100)
#define HERMES_INQ_SCAN			(0xF101)
#define HERMES_INQ_CHANNELINFO		(0xF102)
#define HERMES_INQ_HOSTSCAN		(0xF103)
#define HERMES_INQ_HOSTSCAN_SYMBOL	(0xF104)
#define HERMES_INQ_LINKSTATUS		(0xF200)
#define HERMES_INQ_SEC_STAT_AGERE	(0xF202)

struct hermes_tallies_frame {
	u16 TxUnicastFrames;
	u16 TxMulticastFrames;
	u16 TxFragments;
	u16 TxUnicastOctets;
	u16 TxMulticastOctets;
	u16 TxDeferredTransmissions;
	u16 TxSingleRetryFrames;
	u16 TxMultipleRetryFrames;
	u16 TxRetryLimitExceeded;
	u16 TxDiscards;
	u16 RxUnicastFrames;
	u16 RxMulticastFrames;
	u16 RxFragments;
	u16 RxUnicastOctets;
	u16 RxMulticastOctets;
	u16 RxFCSErrors;
	u16 RxDiscards_NoBuffer;
	u16 TxDiscardsWrongSA;
	u16 RxWEPUndecryptable;
	u16 RxMsgInMsgFragments;
	u16 RxMsgInBadMsgFragments;
	/* Those last are probably not available in very old firmwares */
	u16 RxDiscards_WEPICVError;
	u16 RxDiscards_WEPExcluded;
} __attribute__ ((packed));

/* Grabbed from wlan-ng - Thanks Mark... - Jean II
 * This is the result of a scan inquiry command */
/* Structure describing info about an Access Point */
struct prism2_scan_apinfo {
	u16 channel;		/* Channel where the AP sits */
	u16 noise;		/* Noise level */
	u16 level;		/* Signal level */
	u8 bssid[ETH_ALEN];	/* MAC address of the Access Point */
	u16 beacon_interv;	/* Beacon interval */
	u16 capabilities;	/* Capabilities */
	u16 essid_len;		/* ESSID length */
	u8 essid[32];		/* ESSID of the network */
	u8 rates[10];		/* Bit rate supported */
	u16 proberesp_rate;	/* Data rate of the response frame */
	u16 atim;		/* ATIM window time, Kus (hostscan only) */
} __attribute__ ((packed));

/* Same stuff for the Lucent/Agere card.
 * Thanks to h1kari <h1kari AT dachb0den.com> - Jean II */
struct agere_scan_apinfo {
	u16 channel;		/* Channel where the AP sits */
	u16 noise;		/* Noise level */
	u16 level;		/* Signal level */
	u8 bssid[ETH_ALEN];	/* MAC address of the Access Point */
	u16 beacon_interv;	/* Beacon interval */
	u16 capabilities;	/* Capabilities */
	/* bits: 0-ess, 1-ibss, 4-privacy [wep] */
	u16 essid_len;		/* ESSID length */
	u8 essid[32];		/* ESSID of the network */
} __attribute__ ((packed));

/* Moustafa: Scan structure for Symbol cards */
struct symbol_scan_apinfo {
	u8 channel;		/* Channel where the AP sits */
	u8 unknown1;		/* 8 in 2.9x and 3.9x f/w, 0 otherwise */
	u16 noise;		/* Noise level */
	u16 level;		/* Signal level */
	u8 bssid[ETH_ALEN];	/* MAC address of the Access Point */
	u16 beacon_interv;	/* Beacon interval */
	u16 capabilities;	/* Capabilities */
	/* bits: 0-ess, 1-ibss, 4-privacy [wep] */
	u16 essid_len;		/* ESSID length */
	u8 essid[32];		/* ESSID of the network */
    	u16 rates[5];		/* Bit rate supported */
	u16 basic_rates;	/* Basic rates bitmask */
	u8 unknown2[6];		/* Always FF:FF:FF:FF:00:00 */
	u8 unknown3[8];		/* Always 0, appeared in f/w 3.91-68 */
} __attribute__ ((packed));

union hermes_scan_info {
	struct agere_scan_apinfo	a;
	struct prism2_scan_apinfo	p;
	struct symbol_scan_apinfo	s;
};

#define HERMES_LINKSTATUS_NOT_CONNECTED   (0x0000)  
#define HERMES_LINKSTATUS_CONNECTED       (0x0001)
#define HERMES_LINKSTATUS_DISCONNECTED    (0x0002)
#define HERMES_LINKSTATUS_AP_CHANGE       (0x0003)
#define HERMES_LINKSTATUS_AP_OUT_OF_RANGE (0x0004)
#define HERMES_LINKSTATUS_AP_IN_RANGE     (0x0005)
#define HERMES_LINKSTATUS_ASSOC_FAILED    (0x0006)
  
struct hermes_linkstatus {
	u16 linkstatus;         /* Link status */
} __attribute__ ((packed));

struct hermes_response {
	u16 status, resp0, resp1, resp2;
};

/* "ID" structure - used for ESSID and station nickname */
struct hermes_idstring {
	u16 len;
	u16 val[16];
} __attribute__ ((packed));

struct hermes_multicast {
	u8 addr[HERMES_MAX_MULTICAST][ETH_ALEN];
} __attribute__ ((packed));

// #define HERMES_DEBUG_BUFFER 1
#define HERMES_DEBUG_BUFSIZE 4096
struct hermes_debug_entry {
	int bap;
	u16 id, offset;
	int cycles;
};

#ifdef __KERNEL__

/* Timeouts */
#define HERMES_BAP_BUSY_TIMEOUT (10000) /* In iterations of ~1us */

/* Basic control structure */
typedef struct hermes {
	void __iomem *iobase;
	int reg_spacing;
#define HERMES_16BIT_REGSPACING	0
#define HERMES_32BIT_REGSPACING	1

	u16 inten; /* Which interrupts should be enabled? */

#ifdef HERMES_DEBUG_BUFFER
	struct hermes_debug_entry dbuf[HERMES_DEBUG_BUFSIZE];
	unsigned long dbufp;
	unsigned long profile[HERMES_BAP_BUSY_TIMEOUT+1];
#endif
} hermes_t;

/* Register access convenience macros */
#define hermes_read_reg(hw, off) \
	(ioread16((hw)->iobase + ( (off) << (hw)->reg_spacing )))
#define hermes_write_reg(hw, off, val) \
	(iowrite16((val), (hw)->iobase + ((off) << (hw)->reg_spacing)))
#define hermes_read_regn(hw, name) hermes_read_reg((hw), HERMES_##name)
#define hermes_write_regn(hw, name, val) hermes_write_reg((hw), HERMES_##name, (val))

/* Function prototypes */
void hermes_struct_init(hermes_t *hw, void __iomem *address, int reg_spacing);
int hermes_init(hermes_t *hw);
int hermes_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0,
		      struct hermes_response *resp);
int hermes_allocate(hermes_t *hw, u16 size, u16 *fid);

int hermes_bap_pread(hermes_t *hw, int bap, void *buf, unsigned len,
		       u16 id, u16 offset);
int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, unsigned len,
			u16 id, u16 offset);
int hermes_read_ltv(hermes_t *hw, int bap, u16 rid, unsigned buflen,
		    u16 *length, void *buf);
int hermes_write_ltv(hermes_t *hw, int bap, u16 rid,
		      u16 length, const void *value);

/* Inline functions */

static inline int hermes_present(hermes_t *hw)
{
	return hermes_read_regn(hw, SWSUPPORT0) == HERMES_MAGIC;
}

static inline void hermes_set_irqmask(hermes_t *hw, u16 events)
{
	hw->inten = events;
	hermes_write_regn(hw, INTEN, events);
}

static inline int hermes_enable_port(hermes_t *hw, int port)
{
	return hermes_docmd_wait(hw, HERMES_CMD_ENABLE | (port << 8),
				 0, NULL);
}

static inline int hermes_disable_port(hermes_t *hw, int port)
{
	return hermes_docmd_wait(hw, HERMES_CMD_DISABLE | (port << 8), 
				 0, NULL);
}

/* Initiate an INQUIRE command (tallies or scan).  The result will come as an
 * information frame in __orinoco_ev_info() */
static inline int hermes_inquire(hermes_t *hw, u16 rid)
{
	return hermes_docmd_wait(hw, HERMES_CMD_INQUIRE, rid, NULL);
}

#define HERMES_BYTES_TO_RECLEN(n) ( (((n)+1)/2) + 1 )
#define HERMES_RECLEN_TO_BYTES(n) ( ((n)-1) * 2 )

/* Note that for the next two, the count is in 16-bit words, not bytes */
static inline void hermes_read_words(struct hermes *hw, int off, void *buf, unsigned count)
{
	off = off << hw->reg_spacing;
	ioread16_rep(hw->iobase + off, buf, count);
}

static inline void hermes_write_words(struct hermes *hw, int off, const void *buf, unsigned count)
{
	off = off << hw->reg_spacing;
	iowrite16_rep(hw->iobase + off, buf, count);
}

static inline void hermes_clear_words(struct hermes *hw, int off, unsigned count)
{
	unsigned i;

	off = off << hw->reg_spacing;

	for (i = 0; i < count; i++)
		iowrite16(0, hw->iobase + off);
}

#define HERMES_READ_RECORD(hw, bap, rid, buf) \
	(hermes_read_ltv((hw),(bap),(rid), sizeof(*buf), NULL, (buf)))
#define HERMES_WRITE_RECORD(hw, bap, rid, buf) \
	(hermes_write_ltv((hw),(bap),(rid),HERMES_BYTES_TO_RECLEN(sizeof(*buf)),(buf)))

static inline int hermes_read_wordrec(hermes_t *hw, int bap, u16 rid, u16 *word)
{
	u16 rec;
	int err;

	err = HERMES_READ_RECORD(hw, bap, rid, &rec);
	*word = le16_to_cpu(rec);
	return err;
}

static inline int hermes_write_wordrec(hermes_t *hw, int bap, u16 rid, u16 word)
{
	u16 rec = cpu_to_le16(word);
	return HERMES_WRITE_RECORD(hw, bap, rid, &rec);
}

#else /* ! __KERNEL__ */

/* These are provided for the benefit of userspace drivers and testing programs
   which use ioperm() or iopl() */

#define hermes_read_reg(base, off) (inw((base) + (off)))
#define hermes_write_reg(base, off, val) (outw((val), (base) + (off)))

#define hermes_read_regn(base, name) (hermes_read_reg((base), HERMES_##name))
#define hermes_write_regn(base, name, val) (hermes_write_reg((base), HERMES_##name, (val)))

/* Note that for the next two, the count is in 16-bit words, not bytes */
#define hermes_read_data(base, off, buf, count) (insw((base) + (off), (buf), (count)))
#define hermes_write_data(base, off, buf, count) (outsw((base) + (off), (buf), (count)))

#endif /* ! __KERNEL__ */

#endif  /* _HERMES_H */