/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1995 - 1998 by Andreas Busse and Ralf Baechle
*/
#ifndef __ASM_JAZZ_H
#define __ASM_JAZZ_H
/*
* The addresses below are virtual address. The mappings are
* created on startup via wired entries in the tlb. The Mips
* Magnum R3000 and R4000 machines are similar in many aspects,
* but many hardware register are accessible at 0xb9000000 in
* instead of 0xe0000000.
*/
#define JAZZ_LOCAL_IO_SPACE 0xe0000000
/*
* Revision numbers in PICA_ASIC_REVISION
*
* 0xf0000000 - Rev1
* 0xf0000001 - Rev2
* 0xf0000002 - Rev3
*/
#define PICA_ASIC_REVISION 0xe0000008
/*
* The segments of the seven segment LED are mapped
* to the control bits as follows:
*
* (7)
* ---------
* | |
* (2) | | (6)
* | (1) |
* ---------
* | |
* (3) | | (5)
* | (4) |
* --------- . (0)
*/
#define PICA_LED 0xe000f000
/*
* Some characters for the LED control registers
* The original Mips machines seem to have a LED display
* with integrated decoder while the Acer machines can
* control each of the seven segments and the dot independently.
* It's only a toy, anyway...
*/
#define LED_DOT 0x01
#define LED_SPACE 0x00
#define LED_0 0xfc
#define LED_1 0x60
#define LED_2 0xda
#define LED_3 0xf2
#define LED_4 0x66
#define LED_5 0xb6
#define LED_6 0xbe
#define LED_7 0xe0
#define LED_8 0xfe
#define LED_9 0xf6
#define LED_A 0xee
#define LED_b 0x3e
#define LED_C 0x9c
#define LED_d 0x7a
#define LED_E 0x9e
#define LED_F 0x8e
#ifndef __ASSEMBLY__
static __inline__ void pica_set_led(unsigned int bits)
{
volatile unsigned int *led_register = (unsigned int *) PICA_LED;
*led_register = bits;
}
#endif /* !__ASSEMBLY__ */
/*
* Base address of the Sonic Ethernet adapter in Jazz machines.
*/
#define JAZZ_ETHERNET_BASE 0xe0001000
/*
* Base address of the 53C94 SCSI hostadapter in Jazz machines.
*/
#define JAZZ_SCSI_BASE 0xe0002000
/*
* i8042 keyboard controller for JAZZ and PICA chipsets.
* This address is just a guess and seems to differ from
* other mips machines such as RC3xxx...
*/
#define JAZZ_KEYBOARD_ADDRESS 0xe0005000
#define JAZZ_KEYBOARD_DATA 0xe0005000
#define JAZZ_KEYBOARD_COMMAND 0xe0005001
#ifndef __ASSEMBLY__
typedef struct {
unsigned char data;
unsigned char command;
} jazz_keyboard_hardware;
#define jazz_kh ((keyboard_hardware *) JAZZ_KEYBOARD_ADDRESS)
typedef struct {
unsigned char pad0[3];
unsigned char data;
unsigned char pad1[3];
unsigned char command;
} mips_keyboard_hardware;
/*
* For now. Needs to be changed for RC3xxx support. See below.
*/
#define keyboard_hardware jazz_keyboard_hardware
#endif /* !__ASSEMBLY__ */
/*
* i8042 keyboard controller for most other Mips machines.
*/
#define MIPS_KEYBOARD_ADDRESS 0xb9005000
#define MIPS_KEYBOARD_DATA 0xb9005003
#define MIPS_KEYBOARD_COMMAND 0xb9005007
/*
* Serial and parallel ports (WD 16C552) on the Mips JAZZ
*/
#define JAZZ_SERIAL1_BASE (unsigned int)0xe0006000
#define JAZZ_SERIAL2_BASE (unsigned int)0xe0007000
#define JAZZ_PARALLEL_BASE (unsigned int)0xe0008000
/*
* Dummy Device Address. Used in jazzdma.c
*/
#define JAZZ_DUMMY_DEVICE 0xe000d000
/*
* JAZZ timer registers and interrupt no.
* Note that the hardware timer interrupt is actually on
* cpu level 6, but to keep compatibility with PC stuff
* it is remapped to vector 0. See arch/mips/kernel/entry.S.
*/
#define JAZZ_TIMER_INTERVAL 0xe0000228
#define JAZZ_TIMER_REGISTER 0xe0000230
/*
* DRAM configuration register
*/
#ifndef __ASSEMBLY__
#ifdef __MIPSEL__
typedef struct {
unsigned int bank2 : 3;
unsigned int bank1 : 3;
unsigned int mem_bus_width : 1;
unsigned int reserved2 : 1;
unsigned int page_mode : 1;
unsigned int reserved1 : 23;
} dram_configuration;
#else /* defined (__MIPSEB__) */
typedef struct {
unsigned int reserved1 : 23;
unsigned int page_mode : 1;
unsigned int reserved2 : 1;
unsigned int mem_bus_width : 1;
unsigned int bank1 : 3;
unsigned int bank2 : 3;
} dram_configuration;
#endif
#endif /* !__ASSEMBLY__ */
#define PICA_DRAM_CONFIG 0xe00fffe0
/*
* JAZZ interrupt control registers
*/
#define JAZZ_IO_IRQ_SOURCE 0xe0010000
#define JAZZ_IO_IRQ_ENABLE 0xe0010002
/*
* JAZZ interrupt enable bits
*/
#define JAZZ_IE_PARALLEL (1 << 0)
#define JAZZ_IE_FLOPPY (1 << 1)
#define JAZZ_IE_SOUND (1 << 2)
#define JAZZ_IE_VIDEO (1 << 3)
#define JAZZ_IE_ETHERNET (1 << 4)
#define JAZZ_IE_SCSI (1 << 5)
#define JAZZ_IE_KEYBOARD (1 << 6)
#define JAZZ_IE_MOUSE (1 << 7)
#define JAZZ_IE_SERIAL1 (1 << 8)
#define JAZZ_IE_SERIAL2 (1 << 9)
/*
* JAZZ Interrupt Level definitions
*
* This is somewhat broken. For reasons which nobody can remember anymore
* we remap the Jazz interrupts to the usual ISA style interrupt numbers.
*/
#define JAZZ_PARALLEL_IRQ 16
#define JAZZ_FLOPPY_IRQ 17
#define JAZZ_SOUND_IRQ 18
#define JAZZ_VIDEO_IRQ 19
#define JAZZ_ETHERNET_IRQ 20
#define JAZZ_SCSI_IRQ 21
#define JAZZ_KEYBOARD_IRQ 22
#define JAZZ_MOUSE_IRQ 23
#define JAZZ_SERIAL1_IRQ 24
#define JAZZ_SERIAL2_IRQ 25
#define JAZZ_TIMER_IRQ 31
/*
* JAZZ DMA Channels
* Note: Channels 4...7 are not used with respect to the Acer PICA-61
* chipset which does not provide these DMA channels.
*/
#define JAZZ_SCSI_DMA 0 /* SCSI */
#define JAZZ_FLOPPY_DMA 1 /* FLOPPY */
#define JAZZ_AUDIOL_DMA 2 /* AUDIO L */
#define JAZZ_AUDIOR_DMA 3 /* AUDIO R */
/*
* JAZZ R4030 MCT_ADR chip (DMA controller)
* Note: Virtual Addresses !
*/
#define JAZZ_R4030_CONFIG 0xE0000000 /* R4030 config register */
#define JAZZ_R4030_REVISION 0xE0000008 /* same as PICA_ASIC_REVISION */
#define JAZZ_R4030_INV_ADDR 0xE0000010 /* Invalid Address register */
#define JAZZ_R4030_TRSTBL_BASE 0xE0000018 /* Translation Table Base */
#define JAZZ_R4030_TRSTBL_LIM 0xE0000020 /* Translation Table Limit */
#define JAZZ_R4030_TRSTBL_INV 0xE0000028 /* Translation Table Invalidate */
#define JAZZ_R4030_CACHE_MTNC 0xE0000030 /* Cache Maintenance */
#define JAZZ_R4030_R_FAIL_ADDR 0xE0000038 /* Remote Failed Address */
#define JAZZ_R4030_M_FAIL_ADDR 0xE0000040 /* Memory Failed Address */
#define JAZZ_R4030_CACHE_PTAG 0xE0000048 /* I/O Cache Physical Tag */
#define JAZZ_R4030_CACHE_LTAG 0xE0000050 /* I/O Cache Logical Tag */
#define JAZZ_R4030_CACHE_BMASK 0xE0000058 /* I/O Cache Byte Mask */
#define JAZZ_R4030_CACHE_BWIN 0xE0000060 /* I/O Cache Buffer Window */
/*
* Remote Speed Registers.
*
* 0: free, 1: Ethernet, 2: SCSI, 3: Floppy,
* 4: RTC, 5: Kb./Mouse 6: serial 1, 7: serial 2,
* 8: parallel, 9: NVRAM, 10: CPU, 11: PROM,
* 12: reserved, 13: free, 14: 7seg LED, 15: ???
*/
#define JAZZ_R4030_REM_SPEED 0xE0000070 /* 16 Remote Speed Registers */
/* 0xE0000070,78,80... 0xE00000E8 */
#define JAZZ_R4030_IRQ_ENABLE 0xE00000E8 /* Internal Interrupt Enable */
#define JAZZ_R4030_INVAL_ADDR 0xE0000010 /* Invalid address Register */
#define JAZZ_R4030_IRQ_SOURCE 0xE0000200 /* Interrupt Source Register */
#define JAZZ_R4030_I386_ERROR 0xE0000208 /* i386/EISA Bus Error */
/*
* Virtual (E)ISA controller address
*/
#define JAZZ_EISA_IRQ_ACK 0xE0000238 /* EISA interrupt acknowledge */
/*
* Access the R4030 DMA and I/O Controller
*/
#ifndef __ASSEMBLY__
static inline void r4030_delay(void)
{
__asm__ __volatile__(
".set\tnoreorder\n\t"
"nop\n\t"
"nop\n\t"
"nop\n\t"
"nop\n\t"
".set\treorder");
}
static inline unsigned short r4030_read_reg16(unsigned long addr)
{
unsigned short ret = *((volatile unsigned short *)addr);
r4030_delay();
return ret;
}
static inline unsigned int r4030_read_reg32(unsigned long addr)
{
unsigned int ret = *((volatile unsigned int *)addr);
r4030_delay();
return ret;
}
static inline void r4030_write_reg16(unsigned long addr, unsigned val)
{
*((volatile unsigned short *)addr) = val;
r4030_delay();
}
static inline void r4030_write_reg32(unsigned long addr, unsigned val)
{
*((volatile unsigned int *)addr) = val;
r4030_delay();
}
#endif /* !__ASSEMBLY__ */
#define JAZZ_FDC_BASE 0xe0003000
#define JAZZ_RTC_BASE 0xe0004000
#define JAZZ_PORT_BASE 0xe2000000
#define JAZZ_EISA_BASE 0xe3000000
#endif /* __ASM_JAZZ_H */
