/****************************************************************************** * * Module Name: dsfield - Dispatcher field routines * *****************************************************************************/ /* * Copyright (C) 2000 - 2008, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification. * 2. Redistributions in binary form must reproduce at minimum a disclaimer * substantially similar to the "NO WARRANTY" disclaimer below * ("Disclaimer") and any redistribution must be conditioned upon * including a substantially similar Disclaimer requirement for further * binary redistribution. * 3. Neither the names of the above-listed copyright holders nor the names * of any contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * Alternatively, this software may be distributed under the terms of the * GNU General Public License ("GPL") version 2 as published by the Free * Software Foundation. * * NO WARRANTY * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGES. */ #include #include "accommon.h" #include "amlcode.h" #include "acdispat.h" #include "acinterp.h" #include "acnamesp.h" #include "acparser.h" #define _COMPONENT ACPI_DISPATCHER ACPI_MODULE_NAME("dsfield") /* Local prototypes */ static acpi_status acpi_ds_get_field_names(struct acpi_create_field_info *info, struct acpi_walk_state *walk_state, union acpi_parse_object *arg); /******************************************************************************* * * FUNCTION: acpi_ds_create_buffer_field * * PARAMETERS: Op - Current parse op (create_xXField) * walk_state - Current state * * RETURN: Status * * DESCRIPTION: Execute the create_field operators: * create_bit_field_op, * create_byte_field_op, * create_word_field_op, * create_dword_field_op, * create_qword_field_op, * create_field_op (all of which define a field in a buffer) * ******************************************************************************/ acpi_status acpi_ds_create_buffer_field(union acpi_parse_object *op, struct acpi_walk_state *walk_state) { union acpi_parse_object *arg; struct acpi_namespace_node *node; acpi_status status; union acpi_operand_object *obj_desc; union acpi_operand_object *second_desc = NULL; u32 flags; ACPI_FUNCTION_TRACE(ds_create_buffer_field); /* * Get the name_string argument (name of the new buffer_field) */ if (op->common.aml_opcode == AML_CREATE_FIELD_OP) { /* For create_field, name is the 4th argument */ arg = acpi_ps_get_arg(op, 3); } else { /* For all other create_xXXField operators, name is the 3rd argument */ arg = acpi_ps_get_arg(op, 2); } if (!arg) { return_ACPI_STATUS(AE_AML_NO_OPERAND); } if (walk_state->deferred_node) { node = walk_state->deferred_node; status = AE_OK; } else { /* Execute flag should always be set when this function is entered */ if (!(walk_state->parse_flags & ACPI_PARSE_EXECUTE)) { return_ACPI_STATUS(AE_AML_INTERNAL); } /* Creating new namespace node, should not already exist */ flags = ACPI_NS_NO_UPSEARCH | ACPI_NS_DONT_OPEN_SCOPE | ACPI_NS_ERROR_IF_FOUND; /* Mark node temporary if we are executing a method */ if (walk_state->method_node) { flags |= ACPI_NS_TEMPORARY; } /* Enter the name_string into the namespace */ status = acpi_ns_lookup(walk_state->scope_info, arg->common.value.string, ACPI_TYPE_ANY, ACPI_IMODE_LOAD_PASS1, flags, walk_state, &node); if (ACPI_FAILURE(status)) { ACPI_ERROR_NAMESPACE(arg->common.value.string, status); return_ACPI_STATUS(status); } } /* * We could put the returned object (Node) on the object stack for later, * but for now, we will put it in the "op" object that the parser uses, * so we can get it again at the end of this scope. */ op->common.node = node; /* * If there is no object attached to the node, this node was just created * and we need to create the field object. Otherwise, this was a lookup * of an existing node and we don't want to create the field object again. */ obj_desc = acpi_ns_get_attached_object(node); if (obj_desc) { return_ACPI_STATUS(AE_OK); } /* * The Field definition is not fully parsed at this time. * (We must save the address of the AML for the buffer and index operands) */ /* Create the buffer field object */ obj_desc = acpi_ut_create_internal_object(ACPI_TYPE_BUFFER_FIELD); if (!obj_desc) { status = AE_NO_MEMORY; goto cleanup; } /* * Remember location in AML stream of the field unit opcode and operands -- * since the buffer and index operands must be evaluated. */ second_desc = obj_desc->common.next_object; second_desc->extra.aml_start = op->named.data; second_desc->extra.aml_length = op->named.length; obj_desc->buffer_field.node = node; /* Attach constructed field descriptors to parent node */ status = acpi_ns_attach_object(node, obj_desc, ACPI_TYPE_BUFFER_FIELD); if (ACPI_FAILURE(status)) { goto cleanup; } cleanup: /* Remove local reference to the object */ acpi_ut_remove_reference(obj_desc); return_ACPI_STATUS(status); } /******************************************************************************* * * FUNCTION: acpi_ds_get_field_names * * PARAMETERS: Info - create_field info structure * ` walk_state - Current method state * Arg - First parser arg for the field name list * * RETURN: Status * * DESCRIPTION: Process all named fields in a field declaration. Names are * entered into the namespace. * ******************************************************************************/ static acpi_status acpi_ds_get_field_names(struct acpi_create_field_info *info, struct acpi_walk_state *walk_state, union acpi_parse_object *arg) { acpi_status status; acpi_integer position; ACPI_FUNCTION_TRACE_PTR(ds_get_field_names, info); /* First field starts at bit zero */ info->field_bit_position = 0; /* Process all elements in the field list (of parse nodes) */ while (arg) { /* * Three types of field elements are handled: * 1) Offset - specifies a bit offset * 2) access_as - changes the access mode * 3) Name - Enters a new named field into the namespace */ switch (arg->common.aml_opcode) { case AML_INT_RESERVEDFIELD_OP: position = (acpi_integer) info->field_bit_position + (acpi_integer) arg->common.value.size; if (position > ACPI_UINT32_MAX) { ACPI_ERROR((AE_INFO, "Bit offset within field too large (> 0xFFFFFFFF)")); return_ACPI_STATUS(AE_SUPPORT); } info->field_bit_position = (u32) position; break; case AML_INT_ACCESSFIELD_OP: /* * Get a new access_type and access_attribute -- to be used for all * field units that follow, until field end or another access_as * keyword. * * In field_flags, preserve the flag bits other than the * ACCESS_TYPE bits */ info->field_flags = (u8) ((info-> field_flags & ~(AML_FIELD_ACCESS_TYPE_MASK)) | ((u8) ((u32) arg->common.value.integer >> 8))); info->attribute = (u8) (arg->common.value.integer); break; case AML_INT_NAMEDFIELD_OP: /* Lookup the name, it should already exist */ status = acpi_ns_lookup(walk_state->scope_info, (char *)&arg->named.name, info->field_type, ACPI_IMODE_EXECUTE, ACPI_NS_DONT_OPEN_SCOPE, walk_state, &info->field_node); if (ACPI_FAILURE(status)) { ACPI_ERROR_NAMESPACE((char *)&arg->named.name, status); return_ACPI_STATUS(status); } else { arg->common.node = info->field_node; info->field_bit_length = arg->common.value.size; /* * If there is no object attached to the node, this node was * just created and we need to create the field object. * Otherwise, this was a lookup of an existing node and we * don't want to create the field object again. */ if (!acpi_ns_get_attached_object (info->field_node)) { status = acpi_ex_prep_field_value(info); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } } } /* Keep track of bit position for the next field */ position = (acpi_integer) info->field_bit_position + (acpi_integer) arg->common.value.size; if (position > ACPI_UINT32_MAX) { ACPI_ERROR((AE_INFO, "Field [%4.4s] bit offset too large (> 0xFFFFFFFF)", ACPI_CAST_PTR(char, &info->field_node-> name))); return_ACPI_STATUS(AE_SUPPORT); } info->field_bit_position += info->field_bit_length; break; default: ACPI_ERROR((AE_INFO, "Invalid opcode in field list: %X", arg->common.aml_opcode)); return_ACPI_STATUS(AE_AML_BAD_OPCODE); } arg = arg->common.next; } return_ACPI_STATUS(AE_OK); } /******************************************************************************* * * FUNCTION: acpi_ds_create_field * * PARAMETERS: Op - Op containing the Field definition and args * region_node - Object for the containing Operation Region * ` walk_state - Current method state * * RETURN: Status * * DESCRIPTION: Create a new field in the specified operation region * ******************************************************************************/ acpi_status acpi_ds_create_field(union acpi_parse_object *op, struct acpi_namespace_node *region_node, struct acpi_walk_state *walk_state) { acpi_status status; union acpi_parse_object *arg; struct acpi_create_field_info info; ACPI_FUNCTION_TRACE_PTR(ds_create_field, op); /* First arg is the name of the parent op_region (must already exist) */ arg = op->common.value.arg; if (!region_node) { status = acpi_ns_lookup(walk_state->scope_info, arg->common.value.name, ACPI_TYPE_REGION, ACPI_IMODE_EXECUTE, ACPI_NS_SEARCH_PARENT, walk_state, ®ion_node); if (ACPI_FAILURE(status)) { ACPI_ERROR_NAMESPACE(arg->common.value.name, status); return_ACPI_STATUS(status); } } /* Second arg is the field flags */ arg = arg->common.next; info.field_flags = (u8) arg->common.value.integer; info.attribute = 0; /* Each remaining arg is a Named Field */ info.field_type = ACPI_TYPE_LOCAL_REGION_FIELD; info.region_node = region_node; status = acpi_ds_get_field_names(&info, walk_state, arg->common.next); return_ACPI_STATUS(status); } /******************************************************************************* * * FUNCTION: acpi_ds_init_field_objects * * PARAMETERS: Op - Op containing the Field definition and args * ` walk_state - Current method state * * RETURN: Status * * DESCRIPTION: For each "Field Unit" name in the argument list that is * part of the field declaration, enter the name into the * namespace. * ******************************************************************************/ acpi_status acpi_ds_init_field_objects(union acpi_parse_object *op, struct acpi_walk_state *walk_state) { acpi_status status; union acpi_parse_object *arg = NULL; struct acpi_namespace_node *node; u8 type = 0; u32 flags; ACPI_FUNCTION_TRACE_PTR(ds_init_field_objects, op); /* Execute flag should always be set when this function is entered */ if (!(walk_state->parse_flags & ACPI_PARSE_EXECUTE)) { if (walk_state->parse_flags & ACPI_PARSE_DEFERRED_OP) { /* bank_field Op is deferred, just return OK */ return_ACPI_STATUS(AE_OK); } return_ACPI_STATUS(AE_AML_INTERNAL); } /* * Get the field_list argument for this opcode. This is the start of the * list of field elements. */ switch (walk_state->opcode) { case AML_FIELD_OP: arg = acpi_ps_get_arg(op, 2); type = ACPI_TYPE_LOCAL_REGION_FIELD; break; case AML_BANK_FIELD_OP: arg = acpi_ps_get_arg(op, 4); type = ACPI_TYPE_LOCAL_BANK_FIELD; break; case AML_INDEX_FIELD_OP: arg = acpi_ps_get_arg(op, 3); type = ACPI_TYPE_LOCAL_INDEX_FIELD; break; default: return_ACPI_STATUS(AE_BAD_PARAMETER); } /* Creating new namespace node(s), should not already exist */ flags = ACPI_NS_NO_UPSEARCH | ACPI_NS_DONT_OPEN_SCOPE | ACPI_NS_ERROR_IF_FOUND; /* Mark node(s) temporary if we are executing a method */ if (walk_state->method_node) { flags |= ACPI_NS_TEMPORARY; } /* * Walk the list of entries in the field_list * Note: field_list can be of zero length. In this case, Arg will be NULL. */ while (arg) { /* * Ignore OFFSET and ACCESSAS terms here; we are only interested in the * field names in order to enter them into the namespace. */ if (arg->common.aml_opcode == AML_INT_NAMEDFIELD_OP) { status = acpi_ns_lookup(walk_state->scope_info, (char *)&arg->named.name, type, ACPI_IMODE_LOAD_PASS1, flags, walk_state, &node); if (ACPI_FAILURE(status)) { ACPI_ERROR_NAMESPACE((char *)&arg->named.name, status); if (status != AE_ALREADY_EXISTS) { return_ACPI_STATUS(status); } /* Name already exists, just ignore this error */ status = AE_OK; } arg->common.node = node; } /* Get the next field element in the list */ arg = arg->common.next; } return_ACPI_STATUS(AE_OK); } /******************************************************************************* * * FUNCTION: acpi_ds_create_bank_field * * PARAMETERS: Op - Op containing the Field definition and args * region_node - Object for the containing Operation Region * walk_state - Current method state * * RETURN: Status * * DESCRIPTION: Create a new bank field in the specified operation region * ******************************************************************************/ acpi_status acpi_ds_create_bank_field(union acpi_parse_object *op, struct acpi_namespace_node *region_node, struct acpi_walk_state *walk_state) { acpi_status status; union acpi_parse_object *arg; struct acpi_create_field_info info; ACPI_FUNCTION_TRACE_PTR(ds_create_bank_field, op); /* First arg is the name of the parent op_region (must already exist) */ arg = op->common.value.arg; if (!region_node) { status = acpi_ns_lookup(walk_state->scope_info, arg->common.value.name, ACPI_TYPE_REGION, ACPI_IMODE_EXECUTE, ACPI_NS_SEARCH_PARENT, walk_state, ®ion_node); if (ACPI_FAILURE(status)) { ACPI_ERROR_NAMESPACE(arg->common.value.name, status); return_ACPI_STATUS(status); } } /* Second arg is the Bank Register (Field) (must already exist) */ arg = arg->common.next; status = acpi_ns_lookup(walk_state->scope_info, arg->common.value.string, ACPI_TYPE_ANY, ACPI_IMODE_EXECUTE, ACPI_NS_SEARCH_PARENT, walk_state, &info.register_node); if (ACPI_FAILURE(status)) { ACPI_ERROR_NAMESPACE(arg->common.value.string, status); return_ACPI_STATUS(status); } /* * Third arg is the bank_value * This arg is a term_arg, not a constant * It will be evaluated later, by acpi_ds_eval_bank_field_operands */ arg = arg->common.next; /* Fourth arg is the field flags */ arg = arg->common.next; info.field_flags = (u8) arg->common.value.integer; /* Each remaining arg is a Named Field */ info.field_type = ACPI_TYPE_LOCAL_BANK_FIELD; info.region_node = region_node; /* * Use Info.data_register_node to store bank_field Op * It's safe because data_register_node will never be used when create bank field * We store aml_start and aml_length in the bank_field Op for late evaluation * Used in acpi_ex_prep_field_value(Info) * * TBD: Or, should we add a field in struct acpi_create_field_info, like "void *ParentOp"? */ info.data_register_node = (struct acpi_namespace_node *)op; status = acpi_ds_get_field_names(&info, walk_state, arg->common.next); return_ACPI_STATUS(status); } /******************************************************************************#ifndef __ASMCRIS_ELF_H #define __ASMCRIS_ELF_H /* * ELF register definitions.. */ #include <asm/arch/elf.h> #include <asm/user.h> #define R_CRIS_NONE 0 #define R_CRIS_8 1 #define R_CRIS_16 2 #define R_CRIS_32 3 #define R_CRIS_8_PCREL 4 #define R_CRIS_16_PCREL 5 #define R_CRIS_32_PCREL 6 #define R_CRIS_GNU_VTINHERIT 7 #define R_CRIS_GNU_VTENTRY 8 #define R_CRIS_COPY 9 #define R_CRIS_GLOB_DAT 10 #define R_CRIS_JUMP_SLOT 11 #define R_CRIS_RELATIVE 12 #define R_CRIS_16_GOT 13 #define R_CRIS_32_GOT 14 #define R_CRIS_16_GOTPLT 15 #define R_CRIS_32_GOTPLT 16 #define R_CRIS_32_GOTREL 17 #define R_CRIS_32_PLT_GOTREL 18 #define R_CRIS_32_PLT_PCREL 19 typedef unsigned long elf_greg_t; /* Note that NGREG is defined to ELF_NGREG in include/linux/elfcore.h, and is thus exposed to user-space. */ #define E