/*
* include/asm-arm/arch-s3c2410/entry-macro.S
*
* Low-level IRQ helper macros for S3C2410-based platforms
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
* Modifications:
* 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
*/
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
mov \tmp, #S3C24XX_VA_IRQ
ldr \irqnr, [ \tmp, #0x14 ] @ get irq no
30000:
teq \irqnr, #4
teqne \irqnr, #5
beq 1002f @ external irq reg
@ debug check to see if interrupt reported is the same
@ as the offset....
teq \irqnr, #0
beq 20002f
ldr \irqstat, [ \tmp, #0x10 ] @ INTPND
mov \irqstat, \irqstat, lsr \irqnr
tst \irqstat, #1
bne 20002f
/* debug/warning if we get an invalud response from the
* INTOFFSET register */
#if 1
stmfd r13!, { r0 - r4 , r8-r12, r14 }
ldr r1, [ \tmp, #0x14 ] @ INTOFFSET
ldr r2, [ \tmp, #0x10 ] @ INTPND
ldr r3, [ \tmp, #0x00 ] @ SRCPND
adr r0, 20003f
bl printk
b 20004f
20003:
.ascii "<7>irq: err - bad offset %d, intpnd=%08x, srcpnd=%08x\n"
.byte 0
.align 4
20004:
mov r1, #1
mov \tmp, #S3C24XX_VA_IRQ
ldmfd r13!, { r0 - r4 , r8-r12, r14 }
#endif
@ try working out interrupt number for ourselves
mov \irqnr, #0
ldr \irqstat, [ \tmp, #0x10 ] @ INTPND
10021:
movs \irqstat, \irqstat, lsr#1
bcs 30000b @ try and re-start the proccess
add \irqnr, \irqnr, #1
cmp \irqnr, #32
ble 10021b
@ found no interrupt, set Z flag and leave
movs \irqnr, #0
b 1001f
20005:
20002: @ exit
@ we base the s3c2410x interrupts at 16 and above to allow
@ isa peripherals to have their standard interrupts, also
@ ensure that Z flag is un-set on exit
@ note, we cannot be sure if we get IRQ_EINT0 (0) that
@ there is simply no interrupt pending, so in all other
@ cases we jump to say we have found something, otherwise
@ we check to see if the interrupt really is assrted
adds \irqnr, \irqnr, #IRQ_EINT0
teq \irqnr, #IRQ_EINT0
bne 1001f @ exit
ldr \irqstat, [ \tmp, #0x10 ] @ INTPND
teq \irqstat, #0
moveq \irqnr, #0
b 1001f
@ we get here from no main or external interrupts pending
1002:
add \tmp, \tmp, #S3C24XX_VA_GPIO - S3C24XX_VA_IRQ
ldr \irqstat, [ \tmp, # 0xa8 ] @ EXTINTPEND
ldr \irqnr, [ \tmp, # 0xa4 ] @ EXTINTMASK
bic \irqstat, \irqstat, \irqnr @ clear masked irqs
mov \irqnr, #IRQ_EINT4 @ start extint nos
mov \irqstat, \irqstat, lsr#4 @ ignore bottom 4 bits
10021:
movs \irqstat, \irqstat, lsr#1
bcs 1004f
add \irqnr, \irqnr, #1
cmp \irqnr, #IRQ_EINT23
ble 10021b
@ found no interrupt, set Z flag and leave
movs \irqnr, #0
1004: @ ensure Z flag clear in case our MOVS shifted out the last bit
teq \irqnr, #0
1001:
@ exit irq routine
.endm
/* currently don't need an disable_fiq macro */
.macro disable_fiq
.endm
