/* linux/include/asm-arm/arch-s3c2410/dma.h
*
* Copyright (C) 2003,2004,2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* Samsung S3C241XX DMA support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_DMA_H
#define __ASM_ARCH_DMA_H __FILE__
#include <linux/sysdev.h>
#include <asm/hardware.h>
/*
* This is the maximum DMA address(physical address) that can be DMAd to.
*
*/
#define MAX_DMA_ADDRESS 0x40000000
#define MAX_DMA_TRANSFER_SIZE 0x100000 /* Data Unit is half word */
/* We use `virtual` dma channels to hide the fact we have only a limited
* number of DMA channels, and not of all of them (dependant on the device)
* can be attached to any DMA source. We therefore let the DMA core handle
* the allocation of hardware channels to clients.
*/
enum dma_ch {
DMACH_XD0,
DMACH_XD1,
DMACH_SDI,
DMACH_SPI0,
DMACH_SPI1,
DMACH_UART0,
DMACH_UART1,
DMACH_UART2,
DMACH_TIMER,
DMACH_I2S_IN,
DMACH_I2S_OUT,
DMACH_PCM_IN,
DMACH_PCM_OUT,
DMACH_MIC_IN,
DMACH_USB_EP1,
DMACH_USB_EP2,
DMACH_USB_EP3,
DMACH_USB_EP4,
DMACH_UART0_SRC2, /* s3c2412 second uart sources */
DMACH_UART1_SRC2,
DMACH_UART2_SRC2,
DMACH_UART3, /* s3c2443 has extra uart */
DMACH_UART3_SRC2,
DMACH_MAX, /* the end entry */
};
#define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */
/* we have 4 dma channels */
#ifndef CONFIG_CPU_S3C2443
#define S3C2410_DMA_CHANNELS (4)
#else
#define S3C2410_DMA_CHANNELS (6)
#endif
/* types */
enum s3c2410_dma_state {
S3C2410_DMA_IDLE,
S3C2410_DMA_RUNNING,
S3C2410_DMA_PAUSED
};
/* enum s3c2410_dma_loadst
*
* This represents the state of the DMA engine, wrt to the loaded / running
* transfers. Since we don't have any way of knowing exactly the state of
* the DMA transfers, we need to know the state to make decisions on wether
* we can
*
* S3C2410_DMA_NONE
*
* There are no buffers loaded (the channel should be inactive)
*
* S3C2410_DMA_1LOADED
*
* There is one buffer loaded, however it has not been confirmed to be
* loaded by the DMA engine. This may be because the channel is not
* yet running, or the DMA driver decided that it was too costly to
* sit and wait for it to happen.
*
* S3C2410_DMA_1RUNNING
*
* The buffer has been confirmed running, and not finisged
*
* S3C2410_DMA_1LOADED_1RUNNING
*
* There is a buffer waiting to be loaded by the DMA engine, and one
* currently running.
*/
enum s3c2410_dma_loadst {
S3C2410_DMALOAD_NONE,
S3C2410_DMALOAD_1LOADED,
S3C2410_DMALOAD_1RUNNING,
S3C2410_DMALOAD_1LOADED_1RUNNING,
};
enum s3c2410_dma_buffresult {
S3C2410_RES_OK,
S3C2410_RES_ERR,
S3C2410_RES_ABORT
};
enum s3c2410_dmasrc {
S3C2410_DMASRC_HW, /* source is memory */
S3C2410_DMASRC_MEM /* source is hardware */
};
/* enum s3c2410_chan_op
*
* operation codes passed to the DMA code by the user, and also used
* to inform the current channel owner of any changes to the system state
*/
enum s3c2410_chan_op {
S3C2410_DMAOP_START,
S3C2410_DMAOP_STOP,
S3C2410_DMAOP_PAUSE,
S3C2410_DMAOP_RESUME,
S3C2410_DMAOP_FLUSH,
S3C2410_DMAOP_TIMEOUT, /* internal signal to handler */
S3C2410_DMAOP_STARTED, /* indicate channel started */
};
/* flags */
#define S3C2410_DMAF_SLOW (1<<0) /* slow, so don't worry about
* waiting for reloads */
#define S3C2410_DMAF_AUTOSTART (1<<1) /* auto-start if buffer queued */
/* dma buffer */
struct s3c2410_dma_client {
char *name;
};
/* s3c2410_dma_buf_s
*
* internally used buffer structure to describe a queued or running
* buffer.
*/
struct s3c2410_dma_buf;
struct s3c2410_dma_buf {
struct s3c2410_dma_buf *next;
int magic; /* magic */
int size; /* buffer size in bytes */
dma_addr_t data; /* start of DMA data */
dma_addr_t ptr; /* where the DMA got to [1] */
void *id; /* client's id */
};
/* [1] is this updated for both recv/send modes? */
struct s3c2410_dma_chan;
/* s3c2410_dma_cbfn_t
*
* buffer callback routine type
*/
typedef void (*s3c2410_dma_cbfn_t)(struct s3c2410_dma_chan *,
void *buf, int size,
enum s3c2410_dma_buffresult result);
typedef int (*s3c2410_dma_opfn_t)(struct s3c2410_dma_chan *,
enum s3c2410_chan_op );
struct s3c2410_dma_stats {
unsigned long loads;
unsigned long timeout_longest;
unsigned long timeout_shortest;
unsigned long timeout_avg;
unsigned long timeout_failed;
};
struct s3c2410_dma_map;
/* struct s3c2410_dma_chan
*
* full state information for each DMA channel
*/
struct s3c2410_dma_chan {
/* channel state flags and information */
unsigned char number; /* number of this dma channel */
unsigned char in_use; /* channel allocated */
unsigned char irq_claimed; /* irq claimed for channel */
unsigned char irq_enabled; /* irq enabled for channel */
unsigned char xfer_unit; /* size of an transfer */
/* channel state */
enum s3c2410_dma_state state;
enum s3c2410_dma_loadst load_state;
struct s3c2410_dma_client *client;
/* channel configuration */
enum s3c2410_dmasrc source;
unsigned long dev_addr;
unsigned long load_timeout;
unsigned int flags; /* channel flags */
struct s3c24xx_dma_map *map; /* channel hw maps */
/* channel's hardware position and configuration */
void __iomem *regs; /* channels registers */
void __iomem *addr_reg; /* data address register */
unsigned int irq; /* channel irq */
unsigned long dcon; /* default value of DCON */
/* driver handles */
s3c2410_dma_cbfn_t callback_fn; /* buffer done callback */
s3c2410_dma_opfn_t op_fn; /* channel op callback */
/* stats gathering */
struct s3c2410_dma_stats *stats;
struct s3c2410_dma_stats stats_store;
/* buffer list and information */
struct s3c2410_dma_buf *curr; /* current dma buffer */
struct s3c2410_dma_buf *next; /* next buffer to load */
struct s3c2410_dma_buf *end; /* end of queue */
/* system device */
struct sys_device dev;
};
/* the currently allocated channel information */
extern struct s3c2410_dma_chan s3c2410_chans[];
/* note, we don't really use dma_device_t at the moment */
typedef unsigned long dma_device_t;
/* functions --------------------------------------------------------------- */
/* s3c2410_dma_request
*
* request a dma channel exclusivley
*/
extern int s3c2410_dma_request(dmach_t channel,
struct s3c2410_dma_client *, void *dev);
/* s3c2410_dma_ctrl
*
* change the state of the dma channel
*/
extern int s3c2410_dma_ctrl(dmach_t channel, enum s3c2410_chan_op op);
/* s3c2410_dma_setflags
*
* set the channel's flags to a given state
*/
extern int s3c2410_dma_setflags(dmach_t channel,
unsigned int flags);
/* s3c2410_dma_free
*
* free the dma channel (will also abort any outstanding operations)
*/
extern int s3c2410_dma_free(dmach_t channel, struct s3c2410_dma_client *);
/* s3c2410_dma_enqueue
*
* place the given buffer onto the queue of operations for the channel.
* The buffer must be allocated from dma coherent memory, or the Dcache/WB
* drained before the buffer is given to the DMA system.
*/
extern int s3c2410_dma_enqueue(dmach_t channel, void *id,
dma_addr_t data, int size);
/* s3c2410_dma_config
*
* configure the dma channel
*/
extern int s3c2410_dma_config(dmach_t channel, int xferunit, int dcon);
/* s3c2410_dma_devconfig
*
* configure the device we're talking to
*/
extern int s3c2410_dma_devconfig(int channel, enum s3c2410_dmasrc source,
int hwcfg, unsigned long devaddr);
/* s3c2410_dma_getposition
*
* get the position that the dma transfer is currently at
*/
extern int s3c2410_dma_getposition(dmach_t channel,
dma_addr_t *src, dma_addr_t *dest);
extern int s3c2410_dma_set_opfn(dmach_t, s3c2410_dma_opfn_t rtn);
extern int s3c2410_dma_set_buffdone_fn(dmach_t, s3c2410_dma_cbfn_t rtn);
/* DMA Register definitions */
#define S3C2410_DMA_DISRC (0x00)
#define S3C2410_DMA_DISRCC (0x04)
#define S3C2410_DMA_DIDST (0x08)
#define S3C2410_DMA_DIDSTC (0x0C)
#define S3C2410_DMA_DCON (0x10)
#define S3C2410_DMA_DSTAT (0x14)
#define S3C2410_DMA_DCSRC (0x18)
#define S3C2410_DMA_DCDST (0x1C)
#define S3C2410_DMA_DMASKTRIG (0x20)
#define S3C2412_DMA_DMAREQSEL (0x24)
#define S3C2443_DMA_DMAREQSEL (0x24)
#define S3C2410_DISRCC_INC (1<<0)
#define S3C2410_DISRCC_APB (1<<1)
#define S3C2410_DMASKTRIG_STOP (1<<2)
#define S3C2410_DMASKTRIG_ON (1<<1)
#define S3C2410_DMASKTRIG_SWTRIG (1<<0)
#define S3C2410_DCON_DEMAND (0<<31)
#define S3C2410_DCON_HANDSHAKE (1<<31)
#define S3C2410_DCON_SYNC_PCLK (0<<30)
#define S3C2410_DCON_SYNC_HCLK (1<<30)
#define S3C2410_DCON_INTREQ (1<<29)
#define S3C2410_DCON_CH0_XDREQ0 (0<<24)
#define S3C2410_DCON_CH0_UART0 (1<<24)
#define S3C2410_DCON_CH0_SDI (2<<24)
#define S3C2410_DCON_CH0_TIMER (3<<24)
#define S3C2410_DCON_CH0_USBEP1 (4<<24)
#define S3C2410_DCON_CH1_XDREQ1 (0<<24)
#define S3C2410_DCON_CH1_UART1 (1<<24)
#define S3C2410_DCON_CH1_I2SSDI (2<<24)
#define S3C2410_DCON_CH1_SPI (3<<24)
#define S3C2410_DCON_CH1_USBEP2 (4<<24)
#define S3C2410_DCON_CH2_I2SSDO (0<<24)
#define S3C2410_DCON_CH2_I2SSDI (1<<24)
#define S3C2410_DCON_CH2_SDI (2<<24)
#define S3C2410_DCON_CH2_TIMER (3<<24)
#define S3C2410_DCON_CH2_USBEP3 (4<<24)
#define S3C2410_DCON_CH3_UART2 (0<<24)
#define S3C2410_DCON_CH3_SDI (1<<24)
#define S3C2410_DCON_CH3_SPI (2<<24)
#define S3C2410_DCON_CH3_TIMER (3<<24)
#define S3C2410_DCON_CH3_USBEP4 (4<<24)
#define S3C2410_DCON_SRCSHIFT (24)
#define S3C2410_DCON_SRCMASK (7<<24)
#define S3C2410_DCON_BYTE (0<<20)
#define S3C2410_DCON_HALFWORD (1<<20)
#define S3C2410_DCON_WORD (2<<20)
#define S3C2410_DCON_AUTORELOAD (0<<22)
#define S3C2410_DCON_NORELOAD (1<<22)
#define S3C2410_DCON_HWTRIG (1<<23)
#ifdef CONFIG_CPU_S3C2440
#define S3C2440_DIDSTC_CHKINT (1<<2)
#define S3C2440_DCON_CH0_I2SSDO (5<<24)
#define S3C2440_DCON_CH0_PCMIN (6<<24)
#define S3C2440_DCON_CH1_PCMOUT (5<<24)
#define S3C2440_DCON_CH1_SDI (6<<24)
#define S3C2440_DCON_CH2_PCMIN (5<<24)
#define S3C2440_DCON_CH2_MICIN (6<<24)
#define S3C2440_DCON_CH3_MICIN (5<<24)
#define S3C2440_DCON_CH3_PCMOUT (6<<24)
#endif
#ifdef CONFIG_CPU_S3C2412
#define S3C2412_DMAREQSEL_SRC(x) ((x)<<1)
#define S3C2412_DMAREQSEL_HW (1)
#define S3C2412_DMAREQSEL_SPI0TX S3C2412_DMAREQSEL_SRC(0)
#define S3C2412_DMAREQSEL_SPI0RX S3C2412_DMAREQSEL_SRC(1)
#define S3C2412_DMAREQSEL_SPI1TX S3C2412_DMAREQSEL_SRC(2)
#define S3C2412_DMAREQSEL_SPI1RX S3C2412_DMAREQSEL_SRC(3)
#define S3C2412_DMAREQSEL_I2STX S3C2412_DMAREQSEL_SRC(4)
#define S3C2412_DMAREQSEL_I2SRX S3C2412_DMAREQSEL_SRC(5)
#define S3C2412_DMAREQSEL_TIMER S3C2412_DMAREQSEL_SRC(9)
#define S3C2412_DMAREQSEL_SDI S3C2412_DMAREQSEL_SRC(10)
#define S3C2412_DMAREQSEL_USBEP1 S3C2412_DMAREQSEL_SRC(13)
#define S3C2412_DMAREQSEL_USBEP2 S3C2412_DMAREQSEL_SRC(14)
#define S3C2412_DMAREQSEL_USBEP3 S3C2412_DMAREQSEL_SRC(15)
#define S3C2412_DMAREQSEL_USBEP4 S3C2412_DMAREQSEL_SRC(16)
#define S3C2412_DMAREQSEL_XDREQ0 S3C2412_DMAREQSEL_SRC(17)
#define S3C2412_DMAREQSEL_XDREQ1 S3C2412_DMAREQSEL_SRC(18)
#define S3C2412_DMAREQSEL_UART0_0 S3C2412_DMAREQSEL_SRC(19)
#define S3C2412_DMAREQSEL_UART0_1 S3C2412_DMAREQSEL_SRC(20)
#define S3C2412_DMAREQSEL_UART1_0 S3C2412_DMAREQSEL_SRC(21)
#define S3C2412_DMAREQSEL_UART1_1 S3C2412_DMAREQSEL_SRC(22)
#define S3C2412_DMAREQSEL_UART2_0 S3C2412_DMAREQSEL_SRC(23)
#define S3C2412_DMAREQSEL_UART2_1 S3C2412_DMAREQSEL_SRC(24)
#endif
#define S3C2443_DMAREQSEL_SRC(x) ((x)<<1)
#define S3C2443_DMAREQSEL_HW (1)
#define S3C2443_DMAREQSEL_SPI0TX S3C2443_DMAREQSEL_SRC(0)
#define S3C2443_DMAREQSEL_SPI0RX S3C2443_DMAREQSEL_SRC(1)
#define S3C2443_DMAREQSEL_SPI1TX S3C2443_DMAREQSEL_SRC(2)
#define S3C2443_DMAREQSEL_SPI1RX S3C2443_DMAREQSEL_SRC(3)
#define S3C2443_DMAREQSEL_I2STX S3C2443_DMAREQSEL_SRC(4)
#define S3C2443_DMAREQSEL_I2SRX S3C2443_DMAREQSEL_SRC(5)
#define S3C2443_DMAREQSEL_TIMER S3C2443_DMAREQSEL_SRC(9)
#define S3C2443_DMAREQSEL_SDI S3C2443_DMAREQSEL_SRC(10)
#define S3C2443_DMAREQSEL_XDREQ0 S3C2443_DMAREQSEL_SRC(17)
#define S3C2443_DMAREQSEL_XDREQ1 S3C2443_DMAREQSEL_SRC(18)
#define S3C2443_DMAREQSEL_UART0_0 S3C2443_DMAREQSEL_SRC(19)
#define S3C2443_DMAREQSEL_UART0_1 S3C2443_DMAREQSEL_SRC(20)
#define S3C2443_DMAREQSEL_UART1_0 S3C2443_DMAREQSEL_SRC(21)
#define S3C2443_DMAREQSEL_UART1_1 S3C2443_DMAREQSEL_SRC(22)
#define S3C2443_DMAREQSEL_UART2_0 S3C2443_DMAREQSEL_SRC(23)
#define S3C2443_DMAREQSEL_UART2_1 S3C2443_DMAREQSEL_SRC(24)
#define S3C2443_DMAREQSEL_UART3_0 S3C2443_DMAREQSEL_SRC(25)
#define S3C2443_DMAREQSEL_UART3_1 S3C2443_DMAREQSEL_SRC(26)
#define S3C2443_DMAREQSEL_PCMOUT S3C2443_DMAREQSEL_SRC(27)
#define S3C2443_DMAREQSEL_PCMIN S3C2443_DMAREQSEL_SRC(28)
#define S3C2443_DMAREQSEL_MICIN S3C2443_DMAREQSEL_SRC(29)
#endif /* __ASM_ARCH_DMA_H */