/*
* include/asm-arm/arch-lh7a40x/entry-macro.S
*
* Low-level IRQ helper macros for LH7A40x platforms
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <asm/hardware.h>
#include <asm/arch/irqs.h>
/* In order to allow there to be support for both of the processor
classes at the same time, we make a hack here that isn't very
pretty. At startup, the link pointed to with the
branch_irq_lh7a400 symbol is replaced with a NOP when the CPU is
detected as a lh7a404.
*** FIXME: we should clean this up so that there is only one
implementation for each CPU's design.
*/
#if defined (CONFIG_ARCH_LH7A400) && defined (CONFIG_ARCH_LH7A404)
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
branch_irq_lh7a400: b 1000f
@ Implementation of the LH7A404 get_irqnr_and_base.
mov \irqnr, #0 @ VIC1 irq base
mov \base, #io_p2v(0x80000000) @ APB registers
add \base, \base, #0x8000
ldr \tmp, [\base, #0x0030] @ VIC1_VECTADDR
tst \tmp, #VA_VECTORED @ Direct vectored
bne 1002f
tst \tmp, #VA_VIC1DEFAULT @ Default vectored VIC1
ldrne \irqstat, [\base, #0] @ VIC1_IRQSTATUS
bne 1001f
add \base, \base, #(0xa000 - 0x8000)
ldr \tmp, [\base, #0x0030] @ VIC2_VECTADDR
tst \tmp, #VA_VECTORED @ Direct vectored
bne 1002f
ldr \irqstat, [\base, #0] @ VIC2_IRQSTATUS
mov \irqnr, #32 @ VIC2 irq base
1001: movs \irqstat, \irqstat, lsr #1 @ Shift into carry
bcs 1008f @ Bit set; irq found
add \irqnr, \irqnr, #1
bne 1001b @ Until no bits
b 1009f @ Nothing? Hmm.
1002: and \irqnr, \tmp, #0x3f @ Mask for valid bits
1008: movs \irqstat, #1 @ Force !Z
str \tmp, [\base, #0x0030] @ Clear vector
b 1009f
@ Implementation of the LH7A400 get_irqnr_and_base.
1000: mov \irqnr, #0
mov \base, #io_p2v(0x80000000) @ APB registers
ldr \irqstat, [\base, #0x500] @ PIC INTSR
1001: movs \irqstat, \irqstat, lsr #1 @ Shift into carry
bcs 1008f @ Bit set; irq found
add \irqnr, \irqnr, #1
bne 1001b @ Until no bits
b 1009f @ Nothing? Hmm.
1008: movs \irqstat, #1 @ Force !Z
1009:
.endm
#elif defined (CONFIG_ARCH_LH7A400)
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
mov \irqnr, #0
mov \base, #io_p2v(0x80000000) @ APB registers
ldr \irqstat, [\base, #0x500] @ PIC INTSR
1001: movs \irqstat, \irqstat, lsr #1 @ Shift into carry
bcs 1008f @ Bit set; irq found
add \irqnr, \irqnr, #1
bne 1001b @ Until no bits
b 1009f @ Nothing? Hmm.
1008: movs \irqstat, #1 @ Force !Z
1009:
.endm
#elif defined(CONFIG_ARCH_LH7A404)
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
mov \irqnr, #0 @ VIC1 irq base
mov \base, #io_p2v(0x80000000) @ APB registers
add \base, \base, #0x8000
ldr \tmp, [\base, #0x0030] @ VIC1_VECTADDR
tst \tmp, #VA_VECTORED @ Direct vectored
bne 1002f
tst \tmp, #VA_VIC1DEFAULT @ Default vectored VIC1
ldrne \irqstat, [\base, #0] @ VIC1_IRQSTATUS
bne 1001f
add \base, \base, #(0xa000 - 0x8000)
ldr \tmp, [\base, #0x0030] @ VIC2_VECTADDR
tst \tmp, #VA_VECTORED @ Direct vectored
bne 1002f
ldr \irqstat, [\base, #0] @ VIC2_IRQSTATUS
mov \irqnr, #32 @ VIC2 irq base
1001: movs \irqstat, \irqstat, lsr #1 @ Shift into carry
bcs 1008f @ Bit set; irq found
add \irqnr, \irqnr, #1
bne 1001b @ Until no bits
b 1009f @ Nothing? Hmm.
1002: and \irqnr, \tmp, #0x3f @ Mask for valid bits
1008: movs \irqstat, #1 @ Force !Z
str \tmp, [\base, #0x0030] @ Clear vector
1009:
.endm
#endif
