/*
* This file is part of UBIFS.
*
* Copyright (C) 2006-2008 Nokia Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc., 51
* Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
* Authors: Artem Bityutskiy (Битюцкий Артём)
* Adrian Hunter
*/
/*
* This file implements VFS file and inode operations of regular files, device
* nodes and symlinks as well as address space operations.
*
* UBIFS uses 2 page flags: PG_private and PG_checked. PG_private is set if the
* page is dirty and is used for budgeting purposes - dirty pages should not be
* budgeted. The PG_checked flag is set if full budgeting is required for the
* page e.g., when it corresponds to a file hole or it is just beyond the file
* size. The budgeting is done in 'ubifs_write_begin()', because it is OK to
* fail in this function, and the budget is released in 'ubifs_write_end()'. So
* the PG_private and PG_checked flags carry the information about how the page
* was budgeted, to make it possible to release the budget properly.
*
* A thing to keep in mind: inode's 'i_mutex' is locked in most VFS operations
* we implement. However, this is not true for '->writepage()', which might be
* called with 'i_mutex' unlocked. For example, when pdflush is performing
* write-back, it calls 'writepage()' with unlocked 'i_mutex', although the
* inode has 'I_LOCK' flag in this case. At "normal" work-paths 'i_mutex' is
* locked in '->writepage', e.g. in "sys_write -> alloc_pages -> direct reclaim
* path'. So, in '->writepage()' we are only guaranteed that the page is
* locked.
*
* Similarly, 'i_mutex' does not have to be locked in readpage(), e.g.,
* readahead path does not have it locked ("sys_read -> generic_file_aio_read
* -> ondemand_readahead -> readpage"). In case of readahead, 'I_LOCK' flag is
* not set as well. However, UBIFS disables readahead.
*
* This, for example means that there might be 2 concurrent '->writepage()'
* calls for the same inode, but different inode dirty pages.
*/
#include "ubifs.h"
#include <linux/mount.h>
#include <linux/namei.h>
static int read_block(struct inode *inode, void *addr, unsigned int block,
struct ubifs_data_node *dn)
{
struct ubifs_info *c = inode->i_sb->s_fs_info;
int err, len, out_len;
union ubifs_key key;
unsigned int dlen;
data_key_init(c, &key, inode->i_ino, block);
err = ubifs_tnc_lookup(c, &key, dn);
if (err) {
if (err == -ENOENT)
/* Not found, so it must be a hole */
memset(addr, 0, UBIFS_BLOCK_SIZE);
return err;
}
ubifs_assert(dn->ch.sqnum > ubifs_inode(inode)->creat_sqnum);
len = le32_to_cpu(dn->size);
if (len <= 0 || len > UBIFS_BLOCK_SIZE)
goto dump;
dlen = le32_to_cpu(dn->ch.len) - UBIFS_DATA_NODE_SZ;
out_len = UBIFS_BLOCK_SIZE;
err = ubifs_decompress(&dn->data, dlen, addr, &out_len,
le16_to_cpu(dn->compr_type));
if (err || len != out_len)
goto dump;
/*
* Data length can be less than a full block, even for blocks that are
* not the last in the file (e.g., as a result of making a hole and
* appending data). Ensure that the remainder is zeroed out.
*/
if (len < UBIFS_BLOCK_SIZE)
memset(addr + len, 0, UBIFS_BLOCK_SIZE - len);
return 0;
dump:
ubifs_err("bad data node (block %u, inode %lu)",
block, inode->i_ino);
dbg_dump_node(c, dn);
return -EINVAL;
}
static int do_readpage(struct page *page)
{
void *addr;
int err = 0, i;
unsigned int block, beyond;
struct ubifs_data_node *dn;
struct inode *inode = page->mapping->host;
loff_t i_size = i_size_read(inode);
dbg_gen("ino %lu, pg %lu, i_size %lld, flags %#lx",
inode->i_ino, page->index, i_size, page->flags);
ubifs_assert(!PageChecked(page));
ubifs_assert(!PagePrivate(page));
addr = kmap(page);
block = page->index << UBIFS_BLOCKS_PER_PAGE_SHIFT;
beyond = (i_size + UBIFS_BLOCK_SIZE - 1) >> UBIFS_BLOCK_SHIFT;
if (block >= beyond) {
/* Reading beyond inode */
SetPageChecked(page);
memset(addr, 0, PAGE_CACHE_SIZE);
goto out;
}
dn = kmalloc(UBIFS_MAX_DATA_NODE_SZ, GFP_NOFS);
if (!dn) {
err = -ENOMEM;
goto error;
}
i = 0;
while (1) {
int ret;
if (block >= beyond) {
/* Reading beyond inode */
err = -ENOENT;
memset(addr, 0, UBIFS_BLOCK_SIZE);
} else {
ret = read_block(inode, addr, block, dn);
if (ret) {
err = ret;
if (err != -ENOENT)
break;
}
}
if (++i >= UBIFS_BLOCKS_PER_PAGE)
break;
block += 1;
addr += UBIFS_BLOCK_SIZE;
}
if (err) {
if (err == -ENOENT) {
/* Not found, so it must be a hole */
SetPageChecked(page);
dbg_gen("hole");
goto out_free;
}
ubifs_err("cannot read page %lu of inode %lu, error %d",
page->index, inode->i_ino, err);
goto error;
}
out_free:
kfree(dn);
out:
SetPageUptodate(page);
ClearPageError(page);
flush_dcache_page(page);
kunmap(page);
return 0;
error:
kfree(dn);
ClearPageUptodate(page);
SetPageError(page);
flush_dcache_page(page);
kunmap(page);
return err;
}
/**
* release_new_page_budget - release budget of a new page.
* @c: UBIFS file-system description object
*
* This is a helper function which releases budget corresponding to the budget
* of one new page of data.
*/
static void release_new_page_budget(struct ubifs_info *c)
{
struct ubifs_budget_req req = { .recalculate = 1, .new_page = 1 };
ubifs_release_budget(c, &req);
}
/**
* release_existing_page_budget - release budget of an existing page.
* @c: UBIFS file-system description object
*
* This is a helper function which releases budget corresponding to the budget
* of changing one one page of data which already exists on the flash media.
*/
static void release_existing_page_budget(struct ubifs_info *c)
{
struct ubifs_budget_req req = { .dd_growth = c->page_budget};
ubifs_release_budget(c, &req);
}
static int write_begin_slow(struct address_space *mapping,
loff_t pos, unsigned len, struct page **pagep)
{
struct inode *inode = mapping->host;
struct ubifs_info *c = inode->i_sb->s_fs_info;
pgoff_t index = pos >> PAGE_CACHE_SHIFT;
struct ubifs_budget_req req = { .new_page = 1 };
int uninitialized_var(err), appending = !!(pos + len > inode->i_size);
struct page *page;
dbg_gen("ino %lu, pos %llu, len %u, i_size %lld",
inode->i_ino, pos, len, inode->i_size);
/*
* At the slow path we have to budget before locking the page, because
* budgeting may force write-back, which would wait on locked pages and
* deadlock if we had the page locked. At this point we do not know
* anything about the page, so assume that this is a new page which is
* written to a hole. This corresponds to largest budget. Later the
* budget will be amended if this is not true.
*/
if (appending)
/* We are appending data, budget for inode change */
req.dirtied_ino = 1;
err = ubifs_budget_space(c, &req);
if (unlikely(err))
return err;
page = __grab_cache_page(mapping, index);
if (unlikely(!page)) {
ubifs_release_budget(c, &req);
return -ENOMEM;
}
if (!PageUptodate(page)) {
if (!(pos & PAGE_CACHE_MASK) && len == PAGE_CACHE_SIZE)
SetPageChecked(page);
else {
err = do_readpage(page);
if (err) {
unlock_page(page);
page_cache_release(page);
return err;
}
}
SetPageUptodate(page);
ClearPageError(page);
}
if (PagePrivate(page))
/*
* The page is dirty, which means it was budgeted twice:
* o first time the budget was allocated by the task which
* made the page dirty and set the PG_private flag;
* o and then we budgeted for it for the second time at the
* very beginning of this function.
*
* So what we have to do is to release the page budget we
* allocated.
*/
release_new_page_budget(c);
else if (!PageChecked(page))
/*
* We are changing a page which already exists on the media.
* This means that changing the page does not make the amount
* of indexing information larger, and this part of the budget
* which we have already acquired may be released.
*/
ubifs_convert_page_budget(c);
if (appending) {
struct ubifs_inode *ui = ubifs_inode(inode);
/*
* 'ubifs_write_end()' is optimized from the fast-path part of
* 'ubifs_write_begin()' and expects the @ui_mutex to be locked
* if data is appended.
*/
mutex_lock(&ui->ui_mutex);
if (ui->dirty)
/*
* The inode is dirty already, so we may free the
* budget we allocated.
*/
ubifs_release_dirty_inode_budget(c, ui);
}
*pagep = page;
return 0;
}
/**
* allocate_budget - allocate budget for 'ubifs_write_begin()'.
* @c: UBIFS file-system description object
* @page: page to allocate budget for
* @ui: UBIFS inode object the page belongs to
* @appending: non-zero if the page is appended
*
* This is a helper function for 'ubifs_write_begin()' which allocates budget
* for the operation. The budget is allocated differently depending on whether
* this is appending, whether the page is dirty or not, and so on. This
* function leaves the @ui->ui_mutex locked in case of appending. Returns zero
* in case of success and %-ENOSPC in case of failure.
*/
static int allocate_budget(struct ubifs_info *c, struct page *page,
struct ubifs_inode *ui, int appending)
{
struct ubifs_budget_req req = { .fast = 1 };
if (PagePrivate(page)) {
if (!appending)
/*
* The page is dirty and we are not appending, which
* means no budget is needed at all.
*/
return 0;
mutex_lock(&ui->ui_mutex);
if (ui->dirty)
/*
* The page is dirty and we are appending, so the inode
* has to be marked as dirty. However, it is already
* dirty, so we do not need any budget. We may return,
* but @ui->ui_mutex hast to be left locked because we
* should prevent write-back from flushing the inode
* and freeing the budget. The lock will be released in
* 'ubifs_write_end()'.
*/
return 0;
/*
* The page is dirty, we are appending, the inode is clean, so
* we need to budget the inode change.
*/
req.dirtied_ino = 1;
} else {
if (PageChecked(page))
/*
* The page corresponds to a hole and does not
* exist on the media. So changing it makes
* make the amount of indexing information
* larger, and we have to budget for a new
* page.
*/
req.new_page = 1;
else
/*
* Not a hole, the change will not add any new
* indexing information, budget for page
* change.
*/
req.dirtied_page = 1;
if (appending) {
mutex_lock(&ui->ui_mutex);
if (!ui->dirty)
/*
* The inode is clean but we will have to mark
* it as dirty because we are appending. This
* needs a budget.
*/
req.dirtied_ino = 1;
}
}
return ubifs_budget_space(c, &req);
}
/*
* This function is called when a page of data is going to be written. Since
* the page of data will not necessarily go to the flash straight away, UBIFS
* has to reserve space on the media for it, which is done by means of
* budgeting.
*
* This is the hot-path of the file-system and we are trying to optimize it as
* much as possible. For this reasons it is split on 2 parts - slow and fast.
*
* There many budgeting cases:
* o a new page is appended - we have to budget for a new page and for
* changing the inode; however, if the inode is already dirty, there is
* no need to budget for it;
* o an existing clean page is changed - we have budget for it; if the page
* does not exist on the media (a hole), we have to budget for a new
* page; otherwise, we may budget for changing an existing page; the
* difference between these cases is that changing an existing page does
* not introduce anything new to the FS indexing information, so it does
* not grow, and smaller budget is acquired in this case;
* o an existing dirty page is changed - no need to budget at all, because
* the page budget has been acquired by earlier, when the page has been
* marked dirty.
*
* UBIFS budgeting sub-system may force write-back if it thinks there is no
* space to reserve. This imposes some locking restrictions and makes it
* impossible to take into account the above cases, and makes it impossible to
* optimize budgeting.
*
* The solution for this is that the fast path of 'ubifs_write_begin()' assumes
* there is a plenty of flash space and the budget will be acquired quickly,
* without forcing write-back. The slow path does not make this assumption.
*/
static int ubifs_write_begin(struct file *file, struct address_space *mapping,
loff_t pos, unsigned len, unsigned flags,
struct page **pagep, void **fsdata)
{
struct inode *inode = mapping->host;
struct ubifs_info *c = inode->i_sb->s_fs_info;
struct ubifs_inode *ui = ubifs_inode(inode);
pgoff_t index = pos >> PAGE_CACHE_SHIFT;
int uninitialized_var(err), appending = !!(pos + len > inode->i_size);
struct page *page;
ubifs_assert(ubifs_inode(inode)->ui_size == inode->i_size);
if (unlikely(c->ro_media))
return -EROFS;
/* Try out the fast-path part first */
page = __grab_cache_page(mapping, index);
if (unlikely(!page))
return -ENOMEM;
if (!PageUptodate(page)) {
/* The page is not loaded from the flash */
if (!(pos & PAGE_CACHE_MASK) && len == PAGE_CACHE_SIZE)
/*
* We change whole page so no need to load it. But we
* have to set the @PG_checked flag to make the further
* code the page is new. This might be not true, but it
* is better to budget more that to read the page from
* the media.
*/
SetPageChecked(page);
else {
err = do_readpage(page);
if (err) {
unlock_page(page);
page_cache_release(page);
return err;
}
}
SetPageUptodate(page);
ClearPageError(page);
}
err = allocate_budget(c, page, ui, appending);
if (unlikely(err)) {
ubifs_assert(err == -ENOSPC);
/*
* Budgeting failed which means it would have to force
* write-back but didn't, because we set the @fast flag in the
* request. Write-back cannot be done now, while we have the
* page locked, because it would deadlock. Unlock and free
* everything and fall-back to slow-path.
*/
if (appending) {
ubifs_assert(mutex_is_locked(&ui->ui_mutex));
mutex_unlock(&ui->ui_mutex);
}
unlock_page(page);
page_cache_release(page);
return write_begin_slow(mapping, pos, len, pagep);
}
/*
* Whee, we aquired budgeting quickly - without involving
* garbage-collection, committing or forceing write-back. We return
* with @ui->ui_mutex locked if we are appending pages, and unlocked
* otherwise. This is an optimization (slightly hacky though).
*/
*pagep = page;
return 0;
}
/**
* cancel_budget - cancel budget.
* @c: UBIFS file-system description object
* @page: page to cancel budget for
* @ui: UBIFS inode object the page belongs to
* @appending: non-zero if the page is appended
*
* This is a helper function for a page write operation. It unlocks the
* @ui->ui_mutex in case of appending.
*/
static void cancel_budget(struct ubifs_info *c, struct page *page,
struct ubifs_inode *ui, int appending)
{
if (appending) {
if (!ui->dirty)
ubifs_release_dirty_inode_budget(c, ui);
mutex_unlock(&ui->ui_mutex);
}
if (!PagePrivate(page)) {
if (PageChecked(page))
release_new_page_budget(c);
else
release_existing_page_budget(c);
}
}
static int ubifs_write_end(struct file *file, struct address_space *mapping,
loff_t pos, unsigned len, unsigned copied,
struct page *page, void *fsdata)
{
struct inode *inode = mapping->host;
struct ubifs_inode *ui = ubifs_inode(inode);
struct ubifs_info *c = inode->i_sb->s_fs_info;
loff_t end_pos = pos + len;
int appending = !!(end_pos > inode->i_size);
dbg_gen("ino %lu, pos %llu, pg %lu, len %u, copied %d, i_size %lld",
inode->i_ino, pos, page->index, len, copied, inode->i_size);
if (unlikely(copied < len && len == PAGE_CACHE_SIZE)) {
/*
* VFS copied less data to the page that it intended and
* declared in its '->write_begin()' call via the @len
* argument. If the page was not up-to-date, and @len was
* @PAGE_CACHE_SIZE, the 'ubifs_write_begin()' function did
* not load it from the media (for optimization reasons). This
* means that part of the page contains garbage. So read the
* page now.
*/
dbg_gen("copied %d instead of %d, read page and repeat",
copied, len);
cancel_budget(c, page, ui, appending);
/*
* Return 0 to force VFS to repeat the whole operation, or the
* error code if 'do_readpage()' failes.
*/
copied = do_readpage(page);
goto out;
}
if (!PagePrivate(page)) {
SetPagePrivate(page);
atomic_long_inc(&c->dirty_pg_cnt);
__set_page_dirty_nobuffers(page);
}
if (appending) {
i_size_write(inode, end_pos);
ui->ui_size = end_pos;
/*
* Note, we do not set @I_DIRTY_PAGES (which means that the
* inode has dirty pages), this has been done in
* '__set_page_dirty_nobuffers()'.
*/
__mark_inode_dirty(inode, I_DIRTY_DATASYNC);
ubifs_assert(mutex_is_locked(&ui->ui_mutex));
mutex_unlock(&ui->ui_mutex);
}
out:
unlock_page(page);
page_cache_release(page);
return copied;
}
static int ubifs_readpage(struct file *file, struct page *page)
{
do_readpage(page);
unlock_page(page);
return 0;
}
static int do_writepage(struct page *page, int len)
{
int err = 0, i, blen;
unsigned int block;
void *addr;
union ubifs_key key;
struct inode *inode = page->mapping->host;
struct ubifs_info *c = inode->i_sb->s_fs_info;
#ifdef UBIFS_DEBUG
spin_lock(&ui->ui_lock);
ubifs_assert(page->index <= ui->synced_i_size << PAGE_CACHE_SIZE);
spin_unlock(&ui->ui_lock);
#endif
/* Update radix tree tags */
set_page_writeback(page);
addr = kmap(page);
block = page->index << UBIFS_BLOCKS_PER_PAGE_SHIFT;
i = 0;
while (len) {
blen = min_t(int, len, UBIFS_BLOCK_SIZE);
data_key_init(c, &key, inode->i_ino, block);
err = ubifs_jnl_write_data(c, inode, &key, addr, blen);
if (err)
break;
if (++i >= UBIFS_BLOCKS_PER_PAGE)
break;
block += 1;
addr += blen;
len -= blen;
}
if (err) {
SetPageError(page);
ubifs_err("cannot write page %lu of inode %lu, error %d",
page->index, inode->i_ino, err);
ubifs_ro_mode(c, err);
}
ubifs_assert(PagePrivate(page));
if (PageChecked(page))
release_new_page_budget(c);
else
release_existing_page_budget(c);
atomic_long_dec(&c->dirty_pg_cnt);
ClearPagePrivate(page);
ClearPageChecked(page);
kunmap(page);
unlock_page(page);
end_page_writeback(page);
return err;
}
/*
* When writing-back dirty inodes, VFS first writes-back pages belonging to the
* inode, then the inode itself. For UBIFS this may cause a problem. Consider a
* situation when a we have an inode with size 0, then a megabyte of data is
* appended to the inode, then write-back starts and flushes some amount of the
* dirty pages, the journal becomes full, commit happens and finishes, and then
* an unclean reboot happens. When the file system is mounted next time, the
* inode size would still be 0, but there would be many pages which are beyond
* the inode size, they would be indexed and consume flash space. Because the
* journal has been committed, the replay would not be able to detect this
* situation and correct the inode size. This means UBIFS would have to scan
* whole index and correct all inode sizes, which is long an unacceptable.
*
* To prevent situations like this, UBIFS writes pages back only if they are
* within last synchronized inode size, i.e. the the size which has been
* written to the flash media last time. Otherwise, UBIFS forces inode
* write-back, thus making sure the on-flash inode contains current inode size,
* and then keeps writing pages back.
*
* Some locking issues explanation. 'ubifs_writepage()' first is called with
* the page locked, and it locks @ui_mutex. However, write-back does take inode
* @i_mutex, which means other VFS operations may be run on this inode at the
* same time. And the problematic one is truncation to smaller size, from where
* we have to call 'vmtruncate()', which first changes @inode->i_size, then
* drops the truncated pages. And while dropping the pages, it takes the page
* lock. This means that 'do_truncation()' cannot call 'vmtruncate()' with
* @ui_mutex locked, because it would deadlock with 'ubifs_writepage()'. This
* means that @inode->i_size is changed while @ui_mutex is unlocked.
*
* But in 'ubifs_writepage()' we have to guarantee that we do not write beyond
* inode size. How do we do this if @inode->i_size may became smaller while we
* are in the middle of 'ubifs_writepage()'? The UBIFS solution is the
* @ui->ui_isize "shadow" field which UBIFS uses instead of @inode->i_size
* internally and updates it under @ui_mutex.
*
* Q: why we do not worry that if we race with truncation, we may end up with a
* situation when the inode is truncated while we are in the middle of
* 'do_writepage()', so we do write beyond inode size?
* A: If we are in the middle of 'do_writepage()', truncation would be locked
* on the page lock and it would not write the truncated inode node to the
* journal before we have finished.
*/
static int ubifs_writepage(struct page *page, struct writeback_control *wbc)
{
struct inode *inode = page->mapping->host;
struct ubifs_inode *ui = ubifs_inode(inode);
loff_t i_size = i_size_read(inode), synced_i_size;
pgoff_t end_index = i_size >> PAGE_CACHE_SHIFT;
int err, len = i_size & (PAGE_CACHE_SIZE - 1);
void *kaddr;
dbg_gen("ino %lu, pg %lu, pg flags %#lx",
inode->i_ino, page->index, page->flags);
ubifs_assert(PagePrivate(page));
/* Is the page fully outside @i_size? (truncate in progress) */
if (page->index > end_index || (page->index == end_index && !len)) {
err = 0;
goto out_unlock;
}
spin_lock(&ui->ui_lock);
synced_i_size = ui->synced_i_size;
spin_unlock(&ui->ui_lock);
/* Is the page fully inside @i_size? */
if (page->index < end_index) {
if (page->index >= synced_i_size >> PAGE_CACHE_SHIFT) {
err = inode->i_sb->s_op->write_inode(inode, 1);
if (err)
goto out_unlock;
/*
* The inode has been written, but the write-buffer has
* not been synchronized, so in case of an unclean
* reboot we may end up with some pages beyond inode
* size, but they would be in the journal (because
* commit flushes write buffers) and recovery would deal
* with this.
*/
}
return do_writepage(page, PAGE_CACHE_SIZE);
}
/*
* The page straddles @i_size. It must be zeroed out on each and every
* writepage invocation because it may be mmapped. "A file is mapped
* in multiples of the page size. For a file that is not a multiple of
* the page size, the remaining memory is zeroed when mapped, and
* writes to that region are not written out to the file."
*/
kaddr = kmap_atomic(page, KM_USER0);
memset(kaddr + len, 0, PAGE_CACHE_SIZE - len);
flush_dcache_page(page);
kunmap_atomic(kaddr, KM_USER0);
if (i_size > synced_i_size) {
err = inode->i_sb->s_op->write_inode(inode, 1);
if (err)
goto out_unlock;
}
return do_writepage(page, len);
out_unlock:
unlock_page(page);
return err;
}
/**
* do_attr_changes - change inode attributes.
* @inode: inode to change attributes for
* @attr: describes attributes to change
*/
static void do_attr_changes(struct inode *inode, const struct iattr *attr)
{
if (attr->ia_valid & ATTR_UID)
inode->i_uid = attr->ia_uid;
if (attr->ia_valid & ATTR_GID)
inode->i_gid = attr->ia_gid;
if (attr->ia_valid & ATTR_ATIME)
inode->i_atime = timespec_trunc(attr->ia_atime,
inode->i_sb->s_time_gran);
if (attr->ia_valid & ATTR_MTIME)
inode->i_mtime = timespec_trunc(attr->ia_mtime,
inode->i_sb->s_time_gran);
if (attr->ia_valid & ATTR_CTIME)
inode->i_ctime = timespec_trunc(attr->ia_ctime,
inode->i_sb->s_time_gran);
if (attr->ia_valid & ATTR_MODE) {
umode_t mode = attr->ia_mode;
if (!in_group_p(inode->i_gid) && !capable(CAP_FSETID))
mode &= ~S_ISGID;
inode->i_mode = mode;
}
}
/**
* do_truncation - truncate an inode.
* @c: UBIFS file-system description object
* @inode: inode to truncate
* @attr: inode attribute changes description
*
* This function implements VFS '->setattr()' call when the inode is truncated
* to a smaller size. Returns zero in case of success and a negative error code
* in case of failure.
*/
static int do_truncation(struct ubifs_info *c, struct inode *inode,
const struct iattr *attr)
{
int err;
struct ubifs_budget_req req;
loff_t old_size = inode->i_size, new_size = attr->ia_size;
int offset = new_size & (UBIFS_BLOCK_SIZE - 1), budgeted = 1;
struct ubifs_inode *ui = ubifs_inode(inode);
dbg_gen("ino %lu, size %lld -> %lld", inode->i_ino, old_size, new_size);
memset(&req, 0, sizeof(struct ubifs_budget_req));
/*
* If this is truncation to a smaller size, and we do not truncate on a
* block boundary, budget for changing one data block, because the last
* block will be re-written.
*/
if (new_size & (UBIFS_BLOCK_SIZE - 1))
req.dirtied_page = 1;
req.dirtied_ino = 1;
/* A funny way to budget for truncation node */
req.dirtied_ino_d = UBIFS_TRUN_NODE_SZ;
err = ubifs_budget_space(c, &req);
if (err) {
/*
* Treat truncations to zero as deletion and always allow them,
* just like we do for '->unlink()'.
*/
if (new_size || err != -ENOSPC)
return err;
budgeted = 0;
}
err = vmtruncate(inode, new_size);
if (err)
goto out_budg;
if (offset) {
pgoff_t index = new_size >> PAGE_CACHE_SHIFT;
struct page *page;
page = find_lock_page(inode->i_mapping, index);
if (page) {
if (PageDirty(page)) {
/*
* 'ubifs_jnl_truncate()' will try to truncate
* the last data node, but it contains
* out-of-date data because the page is dirty.
* Write the page now, so that
* 'ubifs_jnl_truncate()' will see an already
* truncated (and up to date) data node.
*/
ubifs_assert(PagePrivate(page));
clear_page_dirty_for_io(page);
if (UBIFS_BLOCKS_PER_PAGE_SHIFT)
offset = new_size &
(PAGE_CACHE_SIZE - 1);
err = do_writepage(page, offset);
page_cache_release(page);
if (err)
goto out_budg;
/*
* We could now tell 'ubifs_jnl_truncate()' not
* to read the last block.
*/
} else {
/*
* We could 'kmap()' the page and pass the data
* to 'ubifs_jnl_truncate()' to save it from
* having to read it.
*/
unlock_page(page);
page_cache_release(page);
}
}
}
mutex_lock(&ui->ui_mutex);
ui->ui_size = inode->i_size;
/* Truncation changes inode [mc]time */
inode->i_mtime = inode->i_ctime = ubifs_current_time(inode);
/* The other attributes may be changed at the same time as well */
do_attr_changes(inode, attr);
err = ubifs_jnl_truncate(c, inode, old_size, new_size);
mutex_unlock(&ui->ui_mutex);
out_budg:
if (budgeted)
ubifs_release_budget(c, &req);
else {
c->nospace = c->nospace_rp = 0;
smp_wmb();
}
return err;
}
/**
* do_setattr - change inode attributes.
* @c: UBIFS file-system description object
* @inode: inode to change attributes for
* @attr: inode attribute changes description
*
* This function implements VFS '->setattr()' call for all cases except
* truncations to smaller size. Returns zero in case of success and a negative
* error code in case of failure.
*/
static int do_setattr(struct ubifs_info *c, struct inode *inode,
const struct iattr *attr)
{
int err, release;
loff_t new_size = attr->ia_size;
struct ubifs_inode *ui = ubifs_inode(inode);
struct ubifs_budget_req req = { .dirtied_ino = 1,
.dirtied_ino_d = ALIGN(ui->data_len, 8) };
err = ubifs_budget_space(c, &req);
if (err)
return err;
if (attr->ia_valid & ATTR_SIZE) {
dbg_gen("size %lld -> %lld", inode->i_size, new_size);
err = vmtruncate(inode, new_size);
if (err)
goto out;
}
mutex_lock(&ui->ui_mutex);
if (attr->ia_valid & ATTR_SIZE) {
/* Truncation changes inode [mc]time */
inode->i_mtime = inode->i_ctime = ubifs_current_time(inode);
/* 'vmtruncate()' changed @i_size, update @ui_size */
ui->ui_size = inode->i_size;
}
do_attr_changes(inode, attr);
release = ui->dirty;
if (attr->ia_valid & ATTR_SIZE)
/*
* Inode length changed, so we have to make sure
* @I_DIRTY_DATASYNC is set.
*/
__mark_inode_dirty(inode, I_DIRTY_SYNC | I_DIRTY_DATASYNC);
else
mark_inode_dirty_sync(inode);
mutex_unlock(&ui->ui_mutex);
if (release)
ubifs_release_budget(c, &req);
if (IS_SYNC(inode))
err = inode->i_sb->s_op->write_inode(inode, 1);
return err;
out:
ubifs_release_budget(c, &req);
return err;
}
int ubifs_setattr(struct dentry *dentry, struct iattr *attr)
{
int err;
struct inode *inode = dentry->d_inode;
struct ubifs_info *c = inode->i_sb->s_fs_info;
dbg_gen("ino %lu, mode %#x, ia_valid %#x",
inode->i_ino, inode->i_mode, attr->ia_valid);
err = inode_change_ok(inode, attr);
if (err)
return err;
err = dbg_check_synced_i_size(inode);
if (err)
return err;
if ((attr->ia_valid & ATTR_SIZE) && attr->ia_size < inode->i_size)
/* Truncation to a smaller size */
err = do_truncation(c, inode, attr);
else
err = do_setattr(c, inode, attr);
return err;
}
static void ubifs_invalidatepage(struct page *page, unsigned long offset)
{
struct inode *inode = page->mapping->host;
struct ubifs_info *c = inode->i_sb->s_fs_info;
ubifs_assert(PagePrivate(page));
if (offset)
/* Partial page remains dirty */
return;
if (PageChecked(page))
release_new_page_budget(c);
else
release_existing_page_budget(c);
atomic_long_dec(&c->dirty_pg_cnt);
ClearPagePrivate(page);
ClearPageChecked(page);
}
static void *ubifs_follow_link(struct dentry *dentry, struct nameidata *nd)
{
struct ubifs_inode *ui = ubifs_inode(dentry->d_inode);
nd_set_link(nd, ui->data);
return NULL;
}
int ubifs_fsync(struct file *file, struct dentry *dentry, int datasync)
{
struct inode *inode = dentry->d_inode;
struct ubifs_info *c = inode->i_sb->s_fs_info;
int err;
dbg_gen("syncing inode %lu", inode->i_ino);
/*
* VFS has already synchronized dirty pages for this inode. Synchronize
* the inode unless this is a 'datasync()' call.
*/
if (!datasync || (inode->i_state & I_DIRTY_DATASYNC)) {
err = inode->i_sb->s_op->write_inode(inode, 1);
if (err)
return err;
}
/*
* Nodes related to this inode may still sit in a write-buffer. Flush
* them.
*/
err = ubifs_sync_wbufs_by_inode(c, inode);
if (err)
return err;
return 0;
}
/**
* mctime_update_needed - check if mtime or ctime update is needed.
* @inode: the inode to do the check for
* @now: current time
*
* This helper function checks if the inode mtime/ctime should be updated or
* not. If current values of the time-stamps are within the UBIFS inode time
* granularity, they are not updated. This is an optimization.
*/
static inline int mctime_update_needed(const struct inode *inode,
const struct timespec *now)
{
if (!timespec_equal(&inode->i_mtime, now) ||
!timespec_equal(&inode->i_ctime, now))
return 1;
return 0;
}
/**
* update_ctime - update mtime and ctime of an inode.
* @c: UBIFS file-system description object
* @inode: inode to update
*
* This function updates mtime and ctime of the inode if it is not equivalent to
* current time. Returns zero in case of success and a negative error code in
* case of failure.
*/
static int update_mctime(struct ubifs_info *c, struct inode *inode)
{
struct timespec now = ubifs_current_time(inode);
struct ubifs_inode *ui = ubifs_inode(inode);
if (mctime_update_needed(inode, &now)) {
int err, release;
struct ubifs_budget_req req = { .dirtied_ino = 1,
.dirtied_ino_d = ALIGN(ui->data_len, 8) };
err = ubifs_budget_space(c, &req);
if (err)
return err;
mutex_lock(&ui->ui_mutex);
inode->i_mtime = inode->i_ctime = ubifs_current_time(inode);
release = ui->dirty;
mark_inode_dirty_sync(inode);
mutex_unlock(&ui->ui_mutex);
if (release)
ubifs_release_budget(c, &req);
}
return 0;
}
static ssize_t ubifs_aio_write(struct kiocb *iocb, const struct iovec *iov,
unsigned long nr_segs, loff_t pos)
{
int err;
ssize_t ret;
struct inode *inode = iocb->ki_filp->f_mapping->host;
struct ubifs_info *c = inode->i_sb->s_fs_info;
err = update_mctime(c, inode);
if (err)
return err;
ret = generic_file_aio_write(iocb, iov, nr_segs, pos);
if (ret < 0)
return ret;
if (ret > 0 && (IS_SYNC(inode) || iocb->ki_filp->f_flags & O_SYNC)) {
err = ubifs_sync_wbufs_by_inode(c, inode);
if (err)
return err;
}
return ret;
}
static int ubifs_set_page_dirty(struct page *page)
{
int ret;
ret = __set_page_dirty_nobuffers(page);
/*
* An attempt to dirty a page without budgeting for it - should not
* happen.
*/
ubifs_assert(ret == 0);
return ret;
}
static int ubifs_releasepage(struct page *page, gfp_t unused_gfp_flags)
{
/*
* An attempt to release a dirty page without budgeting for it - should
* not happen.
*/
if (PageWriteback(page))
return 0;
ubifs_assert(PagePrivate(page));
ubifs_assert(0);
ClearPagePrivate(page);
ClearPageChecked(page);
return 1;
}
/*
* mmap()d file has taken write protection fault and is being made
* writable. UBIFS must ensure page is budgeted for.
*/
static int ubifs_vm_page_mkwrite(struct vm_area_struct *vma, struct page *page)
{
struct inode *inode = vma->vm_file->f_path.dentry->d_inode;
struct ubifs_info *c = inode->i_sb->s_fs_info;
struct timespec now = ubifs_current_time(inode);
struct ubifs_budget_req req = { .new_page = 1 };
int err, update_time;
dbg_gen("ino %lu, pg %lu, i_size %lld", inode->i_ino, page->index,
i_size_read(inode));
ubifs_assert(!(inode->i_sb->s_flags & MS_RDONLY));
if (unlikely(c->ro_media))
return -EROFS;
/*
* We have not locked @page so far so we may budget for changing the
* page. Note, we cannot do this after we locked the page, because
* budgeting may cause write-back which would cause deadlock.
*
* At the moment we do not know whether the page is dirty or not, so we
* assume that it is not and budget for a new page. We could look at
* the @PG_private flag and figure this out, but we may race with write
* back and the page state may change by the time we lock it, so this
* would need additional care. We do not bother with this at the
* moment, although it might be good idea to do. Instead, we allocate
* budget for a new page and amend it later on if the page was in fact
* dirty.
*
* The budgeting-related logic of this function is similar to what we
* do in 'ubifs_write_begin()' and 'ubifs_write_end()'. Glance there
* for more comments.
*/
update_time = mctime_update_needed(inode, &now);
if (update_time)
/*
* We have to change inode time stamp which requires extra
* budgeting.
*/
req.dirtied_ino = 1;
err = ubifs_budget_space(c, &req);
if (unlikely(err)) {
if (err == -ENOSPC)
ubifs_warn("out of space for mmapped file "
"(inode number %lu)", inode->i_ino);
return err;
}
lock_page(page);
if (unlikely(page->mapping != inode->i_mapping ||
page_offset(page) > i_size_read(inode))) {
/* Page got truncated out from underneath us */
err = -EINVAL;
goto out_unlock;
}
if (PagePrivate(page))
release_new_page_budget(c);
else {
if (!PageChecked(page))
ubifs_convert_page_budget(c);
SetPagePrivate(page);
atomic_long_inc(&c->dirty_pg_cnt);
__set_page_dirty_nobuffers(page);
}
if (update_time) {
int release;
struct ubifs_inode *ui = ubifs_inode(inode);
mutex_lock(&ui->ui_mutex);
inode->i_mtime = inode->i_ctime = ubifs_current_time(inode);
release = ui->dirty;
mark_inode_dirty_sync(inode);
mutex_unlock(&ui->ui_mutex);
if (release)
ubifs_release_dirty_inode_budget(c, ui);
}
unlock_page(page);
return 0;
out_unlock:
unlock_page(page);
ubifs_release_budget(c, &req);
return err;
}
static struct vm_operations_struct ubifs_file_vm_ops = {
.fault = filemap_fault,
.page_mkwrite = ubifs_vm_page_mkwrite,
};
static int ubifs_file_mmap(struct file *file, struct vm_area_struct *vma)
{
int err;
/* 'generic_file_mmap()' takes care of NOMMU case */
err = generic_file_mmap(file, vma);
if (err)
return err;
vma->vm_ops = &ubifs_file_vm_ops;
return 0;
}
struct address_space_operations ubifs_file_address_operations = {
.readpage = ubifs_readpage,
.writepage = ubifs_writepage,
.write_begin = ubifs_write_begin,
.write_end = ubifs_write_end,
.invalidatepage = ubifs_invalidatepage,
.set_page_dirty = ubifs_set_page_dirty,
.releasepage = ubifs_releasepage,
};
struct inode_operations ubifs_file_inode_operations = {
.setattr = ubifs_setattr,
.getattr = ubifs_getattr,
#ifdef CONFIG_UBIFS_FS_XATTR
.setxattr = ubifs_setxattr,
.getxattr = ubifs_getxattr,
.listxattr = ubifs_listxattr,
.removexattr = ubifs_removexattr,
#endif
};
struct inode_operations ubifs_symlink_inode_operations = {
.readlink = generic_readlink,
.follow_link = ubifs_follow_link,
.setattr = ubifs_setattr,
.getattr = ubifs_getattr,
};
struct file_operations ubifs_file_operations = {
.llseek = generic_file_llseek,
.read = do_sync_read,
.write = do_sync_write,
.aio_read = generic_file_aio_read,
.aio_write = ubifs_aio_write,
.mmap = ubifs_file_mmap,
.fsync = ubifs_fsync,
.unlocked_ioctl = ubifs_ioctl,
.splice_read = generic_file_splice_read,
.splice_write = generic_file_splice_write,
#ifdef CONFIG_COMPAT
.compat_ioctl = ubifs_compat_ioctl,
#endif
};
