/*
* linux/drivers/video/skeletonfb.c -- Skeleton for a frame buffer device
*
* Modified to new api Jan 2001 by James Simmons (jsimmons@transvirtual.com)
*
* Created 28 Dec 1997 by Geert Uytterhoeven
*
*
* I have started rewriting this driver as a example of the upcoming new API
* The primary goal is to remove the console code from fbdev and place it
* into fbcon.c. This reduces the code and makes writing a new fbdev driver
* easy since the author doesn't need to worry about console internals. It
* also allows the ability to run fbdev without a console/tty system on top
* of it.
*
* First the roles of struct fb_info and struct display have changed. Struct
* display will go away. The way the the new framebuffer console code will
* work is that it will act to translate data about the tty/console in
* struct vc_data to data in a device independent way in struct fb_info. Then
* various functions in struct fb_ops will be called to store the device
* dependent state in the par field in struct fb_info and to change the
* hardware to that state. This allows a very clean separation of the fbdev
* layer from the console layer. It also allows one to use fbdev on its own
* which is a bounus for embedded devices. The reason this approach works is
* for each framebuffer device when used as a tty/console device is allocated
* a set of virtual terminals to it. Only one virtual terminal can be active
* per framebuffer device. We already have all the data we need in struct
* vc_data so why store a bunch of colormaps and other fbdev specific data
* per virtual terminal.
*
* As you can see doing this makes the con parameter pretty much useless
* for struct fb_ops functions, as it should be. Also having struct
* fb_var_screeninfo and other data in fb_info pretty much eliminates the
* need for get_fix and get_var. Once all drivers use the fix, var, and cmap
* fbcon can be written around these fields. This will also eliminate the
* need to regenerate struct fb_var_screeninfo, struct fb_fix_screeninfo
* struct fb_cmap every time get_var, get_fix, get_cmap functions are called
* as many drivers do now.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive for
* more details.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/pci.h>
/*
* This is just simple sample code.
*
* No warranty that it actually compiles.
* Even less warranty that it actually works :-)
*/
/*
* Driver data
*/
static char *mode_option __devinitdata;
/*
* If your driver supports multiple boards, you should make the
* below data types arrays, or allocate them dynamically (using kmalloc()).
*/
/*
* This structure defines the hardware state of the graphics card. Normally
* you place this in a header file in linux/include/video. This file usually
* also includes register information. That allows other driver subsystems
* and userland applications the ability to use the same header file to
* avoid duplicate work and easy porting of software.
*/
struct xxx_par;
/*
* Here we define the default structs fb_fix_screeninfo and fb_var_screeninfo
* if we don't use modedb. If we do use modedb see xxxfb_init how to use it
* to get a fb_var_screeninfo. Otherwise define a default var as well.
*/
static struct fb_fix_screeninfo xxxfb_fix __initdata = {
.id = "FB's name",
.type = FB_TYPE_PACKED_PIXELS,
.visual = FB_VISUAL_PSEUDOCOLOR,
.xpanstep = 1,
.ypanstep = 1,
.ywrapstep = 1,
.accel = FB_ACCEL_NONE,
};
/*
* Modern graphical hardware not only supports pipelines but some
* also support multiple monitors where each display can have its
* its own unique data. In this case each display could be
* represented by a separate framebuffer device thus a separate
* struct fb_info. Now the struct xxx_par represents the graphics
* hardware state thus only one exist per card. In this case the
* struct xxx_par for each graphics card would be shared between
* every struct fb_info that represents a framebuffer on that card.
* This allows when one display changes it video resolution (info->var)
* the other displays know instantly. Each display can always be
* aware of the entire hardware state that affects it because they share
* the same xxx_par struct. The other side of the coin is multiple
* graphics cards that pass data around until it is finally displayed
* on one monitor. Such examples are the voodoo 1 cards and high end
* NUMA graphics servers. For this case we have a bunch of pars, each
* one that represents a graphics state, that belong to one struct
* fb_info. Their you would want to have *par point to a array of device
* states and have each struct fb_ops function deal with all those
* states. I hope this covers every possible hardware design. If not
* feel free to send your ideas at jsimmons@users.sf.net
*/
/*
* If your driver supports multiple boards or it supports multiple
* framebuffers, you should make these arrays, or allocate them
* dynamically using framebuffer_alloc() and free them with
* framebuffer_release().
*/
static struct fb_info info;
/*
* Each one represents the state of the hardware. Most hardware have
* just one hardware state. These here represent the default state(s).
*/
static struct xxx_par __initdata current_par;
int xxxfb_init(void);
int xxxfb_setup(char*);
/**
* xxxfb_open - Optional function. Called when the framebuffer is
* first accessed.
* @info: frame buffer structure that represents a single frame buffer
* @user: tell us if the userland (value=1) or the console is accessing
* the framebuffer.
*
* This function is the first function called in the framebuffer api.
* Usually you don't need to provide this function. The case where it
* is used is to change from a text mode hardware state to a graphics
* mode state.
*
* Returns negative errno on error, or zero on success.
*/
static int xxxfb_open(const struct fb_info *info, int user)
{
return 0;
}
/**
* xxxfb_release - Optional function. Called when the framebuffer
* device is closed.
* @info: frame buffer structure that represents a single frame buffer
* @user: tell us if the userland (value=1) or the console is accessing
* the framebuffer.
*
* Thus function is called when we close /dev/fb or the framebuffer
* console system is released. Usually you don't need this function.
* The case where it is usually used is to go from a graphics state
* to a text mode state.
*
* Returns negative errno on error, or zero on success.
*/
static int xxxfb_release(const struct fb_info *info, int user)
{
return 0;
}
/**
* xxxfb_check_var - Optional function. Validates a var passed in.
* @var: frame buffer variable screen structure
* @info: frame buffer structure that represents a single frame buffer
*
* Checks to see if the hardware supports the state requested by
* var passed in. This function does not alter the hardware state!!!
* This means the data stored in struct fb_info and struct xxx_par do
* not change. This includes the var inside of struct fb_info.
* Do NOT change these. This function can be called on its own if we
* intent to only test a mode and not actually set it. The stuff in
* modedb.c is a example of this. If the var passed in is slightly
* off by what the hardware can support then we alter the var PASSED in
* to what we can do.
*
* For values that are off, this function must round them _up_ to the
* next value that is supported by the hardware. If the value is
* greater than the highest value supported by the hardware, then this
* function must return -EINVAL.
*
* Exception to the above rule: Some drivers have a fixed mode, ie,
* the hardware is already set at boot up, and cannot be changed. In
* this case, it is more acceptable that this function just return
* a copy of the currently working var (info->var). Better is to not
* implement this function, as the upper layer will do the copying
* of the current var for you.
*
* Note: This is the only function where the contents of var can be
* freely adjusted after the driver has been registered. If you find
* that you have code outside of this function that alters the content
* of var, then you are doing something wrong. Note also that the
* contents of info->var must be left untouched at all times after
* driver registration.
*
* Returns negative errno on error, or zero on success.
*/
static int xxxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
{
/* ... */
return 0;
}
/**
* xxxfb_set_par - Optional function. Alters the hardware state.
* @info: frame buffer structure that represents a single frame buffer
*
* Using the fb_var_screeninfo in fb_info we set the resolution of the
* this particular framebuffer. This function alters the par AND the
* fb_fix_screeninfo stored in fb_info. It doesn't not alter var in
* fb_info since we are using that data. This means we depend on the
* data in var inside fb_info to be supported by the hardware.
*
* This function is also used to recover/restore the hardware to a
* known working state.
*
* xxxfb_check_var is always called before xxxfb_set_par to ensure that
* the contents of var is always valid.
*
* Again if you can't change the resolution you don't need this function.
*
* However, even if your hardware does not support mode changing,
* a set_par might be needed to at least initialize the hardware to
* a known working state, especially if it came back from another
* process that also modifies the same hardware, such as X.
*
* If this is the case, a combination such as the following should work:
*
* static int xxxfb_check_var(struct fb_var_screeninfo *var,
* struct fb_info *info)
* {
* *var = info->var;
* return 0;
* }
*
* static int xxxfb_set_par(struct fb_info *info)
* {
* init your hardware here
* }
*
* Returns negative errno on error, or zero on success.
*/
static int xxxfb_set_par(struct fb_info *info)
{
struct xxx_par *par = info->par;
/* ... */
return 0;
}
/**
* xxxfb_setcolreg - Optional function. Sets a color register.
* @regno: Which register in the CLUT we are programming
* @red: The red value which can be up to 16 bits wide
* @green: The green value which can be up to 16 bits wide
* @blue: The blue value which can be up to 16 bits wide.
* @transp: If supported, the alpha value which can be up to 16 bits wide.
* @info: frame buffer info structure
*
* Set a single color register. The values supplied have a 16 bit
* magnitude which needs to be scaled in this function for the hardware.
* Things to take into consideration are how many color registers, if
* any, are supported with the current color visual. With truecolor mode
* no color palettes are supported. Here a pseudo palette is created
* which we store the value in pseudo_palette in struct fb_info. For
* pseudocolor mode we have a limited color palette. To deal with this
* we can program what color is displayed for a particular pixel value.
* DirectColor is similar in that we can program each color field. If
* we have a static colormap we don't need to implement this function.
*
* Returns negative errno on error, or zero on success.
*/
static int xxxfb_setcolreg(unsigned regno, unsigned red, unsigned green,
unsigned blue, unsigned transp,
struct fb_info *info)
{
if (regno >= 256) /* no. of hw registers */
return -EINVAL;
/*
* Program hardware... do anything you want with transp
*/
/* grayscale works only partially under directcolor */
if (info->var.grayscale) {
/* grayscale = 0.30*R + 0.59*G + 0.11*B */
red = green = blue = (red * 77 + green * 151 + blue * 28) >> 8;
}
/* Directcolor:
* var->{color}.offset contains start of bitfield
* var->{color}.length contains length of bitfield
* {hardwarespecific} contains width of DAC
* pseudo_palette[X] is programmed to (X << red.offset) |
* (X << green.offset) |
* (X << blue.offset)
* RAMDAC[X] is programmed to (red, green, blue)
* color depth = SUM(var->{color}.length)
*
* Pseudocolor:
* var->{color}.offset is 0
* var->{color}.length contains width of DAC or the number of unique
* colors available (color depth)
* pseudo_palette is not used
* RAMDAC[X] is programmed to (red, green, blue)
* color depth = var->{color}.length
*
* Static pseudocolor:
* same as Pseudocolor, but the RAMDAC is not programmed (read-only)
*
* Mono01/Mono10:
* Has only 2 values, black on white or white on black (fg on bg),
* var->{color}.offset is 0
* white = (1 << var->{color}.length) - 1, black = 0
* pseudo_palette is not used
* RAMDAC does not exist
* color depth is always 2
*
* Truecolor:
* does not use RAMDAC (usually has 3 of them).
* var->{color}.offset contains start of bitfield
* var->{color}.length contains length of bitfield
* pseudo_palette is programmed to (red << red.offset) |
* (green << green.offset) |
* (blue << blue.offset) |
* (transp << transp.offset)
* RAMDAC does not exist
* color depth = SUM(var->{color}.length})
*
* The color depth is used by fbcon for choosing the logo and also
* for color palette transformation if color depth < 4
*
* As can be seen from the above, the field bits_per_pixel is _NOT_
* a criteria for describing the color visual.
*
* A common mistake is assuming that bits_per_pixel <= 8 is pseudocolor,
* and higher than that, true/directcolor. This is incorrect, one needs
* to look at the fix->visual.
*
* Another common mistake is using bits_per_pixel to calculate the color
* depth. The bits_per_pixel field does not directly translate to color
* depth. You have to compute for the color depth (using the color
* bitfields) and fix->visual as seen above.
*/
/*
* This is the point where the color is converted to something that
* is acceptable by the hardware.
*/
#define CNVT_TOHW(val,width) ((((val)<<(width))+0x7FFF-(val))>>16)
red = CNVT_TOHW(red, info->var.red.length);
green = CNVT_TOHW(green, info->var.green.length);
blue = CNVT_TOHW(blue, info->var.blue.length);
transp = CNVT_TOHW(transp, info->var.transp.length);
#undef CNVT_TOHW
/*
* This is the point where the function feeds the color to the hardware
* palette after converting the colors to something acceptable by
* the hardware. Note, only FB_VISUAL_DIRECTCOLOR and
* FB_VISUAL_PSEUDOCOLOR visuals need to write to the hardware palette.
* If you have code that writes to the hardware CLUT, and it's not
* any of the above visuals, then you are doing something wrong.
*/
if (info->fix.visual == FB_VISUAL_DIRECTCOLOR ||
info->fix.visual == FB_VISUAL_TRUECOLOR)
write_{red|green|blue|transp}_to_clut();
/* This is the point were you need to fill up the contents of
* info->pseudo_palette. This structure is used _only_ by fbcon, thus
* it only contains 16 entries to match the number of colors supported
* by the console. The pseudo_palette is used only if the visual is
* in directcolor or truecolor mode. With other visuals, the
* pseudo_palette is not used. (This might change in the future.)
*
* The contents of the pseudo_palette is in raw pixel format. Ie, each
* entry can be written directly to the framebuffer without any conversion.
* The pseudo_palette is (void *). However, if using the generic
* drawing functions (cfb_imageblit, cfb_fillrect), the pseudo_palette
* must be casted to (u32 *) _regardless_ of the bits per pixel. If the
* driver is using its own drawing functions, then it can use whatever
* size it wants.
*/
if (info->fix.visual == FB_VISUAL_TRUECOLOR ||
info->fix.visual == FB_VISUAL_DIRECTCOLOR) {
u32 v;
if (regno >= 16)
return -EINVAL;
v = (red << info->var.red.offset) |
(green << info->var.green.offset) |
(blue << info->var.blue.offset) |
(transp << info->var.transp.offset);
((u32*)(info->pseudo_palette))[regno] = v;
}
/* ... */
return 0;
}
/**
* xxxfb_pan_display - NOT a required function. Pans the display.
* @var: frame buffer variable screen structure
* @info: frame buffer structure that represents a single frame buffer
*
* Pan (or wrap, depending on the `vmode' field) the display using the
* `xoffset' and `yoffset' fields of the `var' structure.
* If the values don't fit, return -EINVAL.
*
* Returns negative errno on error, or zero on success.
*/
static int xxxfb_pan_display(struct fb_var_screeninfo *var,
struct fb_info *info)
{
/*
* If your hardware does not support panning, _do_ _not_ implement this
* function. Creating a dummy function will just confuse user apps.
*/
/*
* Note that even if this function is fully functional, a setting of
* 0 in both xpanstep and ypanstep means that this function will never
* get called.
*/
/* ... */
return 0;
}
/**
* xxxfb_blank - NOT a required function. Blanks the display.
* @blank_mode: the blank mode we want.
* @info: frame buffer structure that represents a single frame buffer
*
* Blank the screen if blank_mode != FB_BLANK_UNBLANK, else unblank.
* Return 0 if blanking succeeded, != 0 if un-/blanking failed due to
* e.g. a video mode which doesn't support it.
*
* Implements VESA suspend and powerdown modes on hardware that supports
* disabling hsync/vsync:
*
* FB_BLANK_NORMAL = display is blanked, syncs are on.
* FB_BLANK_HSYNC_SUSPEND = hsync off
* FB_BLANK_VSYNC_SUSPEND = vsync off
* FB_BLANK_POWERDOWN = hsync and vsync off
*
* If implementing this function, at least support FB_BLANK_UNBLANK.
* Return !0 for any modes that are unimplemented.
*
*/
static int xxxfb_blank(int blank_mode, struct fb_info *info)
{
/* ... */
return 0;
}
/* ------------ Accelerated Functions --------------------- */
/*
* We provide our own functions if we have hardware acceleration
* or non packed pixel format layouts. If we have no hardware
* acceleration, we can use a generic unaccelerated function. If using
* a pack pixel format just use the functions in cfb_*.c. Each file
* has one of the three different accel functions we support.
*/
/**
* xxxfb_fillrect - REQUIRED function. Can use generic routines if
* non acclerated hardware and packed pixel based.
* Draws a rectangle on the screen.
*
* @info: frame buffer structure that represents a single frame buffer
* @region: The structure representing the rectangular region we
* wish to draw to.
*
* This drawing operation places/removes a retangle on the screen
* depending on the rastering operation with the value of color which
* is in the current color depth format.
*/
void xxxfb_fillrect(struct fb_info *p, const struct fb_fillrect *region)
{
/* Meaning of struct fb_fillrect
*
* @dx: The x and y corrdinates of the upper left hand corner of the
* @dy: area we want to draw to.
* @width: How wide the rectangle is we want to draw.
* @height: How tall the rectangle is we want to draw.
* @color: The color to fill in the rectangle with.
* @rop: The raster operation. We can draw the rectangle with a COPY
* of XOR which provides erasing effect.
*/
}
/**
* xxxfb_copyarea - REQUIRED function. Can use generic routines if
* non acclerated hardware and packed pixel based.
* Copies one area of the screen to another area.
*
* @info: frame buffer structure that represents a single frame buffer
* @area: Structure providing the data to copy the framebuffer contents
* from one region to another.
*
* This drawing operation copies a rectangular area from one area of the
* screen to another area.
*/
void xxxfb_copyarea(struct fb_info *p, const struct fb_copyarea *area)
{
/*
* @dx: The x and y coordinates of the upper left hand corner of the
* @dy: destination area on the screen.
* @width: How wide the rectangle is we want to copy.
* @height: How tall the rectangle is we want to copy.
* @sx: The x and y coordinates of the upper left hand corner of the
* @sy: source area on the screen.
*/
}
/**
* xxxfb_imageblit - REQUIRED function. Can use generic routines if
* non acclerated hardware and packed pixel based.
* Copies a image from system memory to the screen.
*
* @info: frame buffer structure that represents a single frame buffer
* @image: structure defining the image.
*
* This drawing operation draws a image on the screen. It can be a
* mono image (needed for font handling) or a color image (needed for
* tux).
*/
void xxxfb_imageblit(struct fb_info *p, const struct fb_image *image)
{
/*
* @dx: The x and y coordinates of the upper left hand corner of the
* @dy: destination area to place the image on the screen.
* @width: How wide the image is we want to copy.
* @height: How tall the image is we want to copy.
* @fg_color: For mono bitmap images this is color data for
* @bg_color: the foreground and background of the image to
* write directly to the frmaebuffer.
* @depth: How many bits represent a single pixel for this image.
* @data: The actual data used to construct the image on the display.
* @cmap: The colormap used for color images.
*/
/*
* The generic function, cfb_imageblit, expects that the bitmap scanlines are
* padded to the next byte. Most hardware accelerators may require padding to
* the next u16 or the next u32. If that is the case, the driver can specify
* this by setting info->pixmap.scan_align = 2 or 4. See a more
* comprehensive description of the pixmap below.
*/
}
/**
* xxxfb_cursor - OPTIONAL. If your hardware lacks support
* for a cursor, leave this field NULL.
*
* @info: frame buffer structure that represents a single frame buffer
* @cursor: structure defining the cursor to draw.
*
* This operation is used to set or alter the properities of the
* cursor.
*
* Returns negative errno on error, or zero on success.
*/
int xxxfb_cursor(struct fb_info *info, struct fb_cursor *cursor)
{
/*
* @set: Which fields we are altering in struct fb_cursor
* @enable: Disable or enable the cursor
* @rop: The bit operation we want to do.
* @mask: This is the cursor mask bitmap.
* @dest: A image of the area we are going to display the cursor.
* Used internally by the driver.
* @hot: The hot spot.
* @image: The actual data for the cursor image.
*
* NOTES ON FLAGS (cursor->set):
*
* FB_CUR_SETIMAGE - the cursor image has changed (cursor->image.data)
* FB_CUR_SETPOS - the cursor position has changed (cursor->image.dx|dy)
* FB_CUR_SETHOT - the cursor hot spot has changed (cursor->hot.dx|dy)
* FB_CUR_SETCMAP - the cursor colors has changed (cursor->fg_color|bg_color)
* FB_CUR_SETSHAPE - the cursor bitmask has changed (cursor->mask)
* FB_CUR_SETSIZE - the cursor size has changed (cursor->width|height)
* FB_CUR_SETALL - everything has changed
*
* NOTES ON ROPs (cursor->rop, Raster Operation)
*
* ROP_XOR - cursor->image.data XOR cursor->mask
* ROP_COPY - curosr->image.data AND cursor->mask
*
* OTHER NOTES:
*
* - fbcon only supports a 2-color cursor (cursor->image.depth = 1)
* - The fb_cursor structure, @cursor, _will_ always contain valid
* fields, whether any particular bitfields in cursor->set is set
* or not.
*/
}
/**
* xxxfb_rotate - NOT a required function. If your hardware
* supports rotation the whole screen then
* you would provide a hook for this.
*
* @info: frame buffer structure that represents a single frame buffer
* @angle: The angle we rotate the screen.
*
* This operation is used to set or alter the properities of the
* cursor.
*/
void xxxfb_rotate(struct fb_info *info, int angle)
{
/* Will be deprecated */
}
/**
* xxxfb_poll - NOT a required function. The purpose of this
* function is to provide a way for some process
* to wait until a specific hardware event occurs
* for the framebuffer device.
*
* @info: frame buffer structure that represents a single frame buffer
* @wait: poll table where we store process that await a event.
*/
void xxxfb_poll(struct fb_info *info, poll_table *wait)
{
}
/**
* xxxfb_sync - NOT a required function. Normally the accel engine
* for a graphics card take a specific amount of time.
* Often we have to wait for the accelerator to finish
* its operation before we can write to the framebuffer
* so we can have consistent display output.
*
* @info: frame buffer structure that represents a single frame buffer
*
* If the driver has implemented its own hardware-based drawing function,
* implementing this function is highly recommended.
*/
int xxxfb_sync(struct fb_info *info)
{
return 0;
}
/*
* Frame buffer operations
*/
static struct fb_ops xxxfb_ops = {
.owner = THIS_MODULE,
.fb_open = xxxfb_open,
.fb_read = xxxfb_read,
.fb_write = xxxfb_write,
.fb_release = xxxfb_release,
.fb_check_var = xxxfb_check_var,
.fb_set_par = xxxfb_set_par,
.fb_setcolreg = xxxfb_setcolreg,
.fb_blank = xxxfb_blank,
.fb_pan_display = xxxfb_pan_display,
.fb_fillrect = xxxfb_fillrect, /* Needed !!! */
.fb_copyarea = xxxfb_copyarea, /* Needed !!! */
.fb_imageblit = xxxfb_imageblit, /* Needed !!! */
.fb_cursor = xxxfb_cursor, /* Optional !!! */
.fb_rotate = xxxfb_rotate,
.fb_poll = xxxfb_poll,
.fb_sync = xxxfb_sync,
.fb_ioctl = xxxfb_ioctl,
.fb_mmap = xxxfb_mmap,
};
/* ------------------------------------------------------------------------- */
/*
* Initialization
*/
/* static int __init xxfb_probe (struct device *device) -- for platform devs */
static int __devinit xxxfb_probe(struct pci_dev *dev,
const_struct pci_device_id *ent)
{
struct fb_info *info;
struct xxx_par *par;
struct device* device = &dev->dev; /* for pci drivers */
int cmap_len, retval;
/*
* Dynamically allocate info and par
*/
info = framebuffer_alloc(sizeof(struct xxx_par), device);
if (!info) {
/* goto error path */
}
par = info->par;
/*
* Here we set the screen_base to the virtual memory address
* for the framebuffer. Usually we obtain the resource address
* from the bus layer and then translate it to virtual memory
* space via ioremap. Consult ioport.h.
*/
info->screen_base = framebuffer_virtual_memory;
info->fbops = &xxxfb_ops;
info->fix = xxxfb_fix; /* this will be the only time xxxfb_fix will be
* used, so mark it as __initdata
*/
info->pseudo_palette = pseudo_palette; /* The pseudopalette is an
* 16-member array
*/
/*
* Set up flags to indicate what sort of acceleration your
* driver can provide (pan/wrap/copyarea/etc.) and whether it
* is a module -- see FBINFO_* in include/linux/fb.h
*
* If your hardware can support any of the hardware accelerated functions
* fbcon performance will improve if info->flags is set properly.
*
* FBINFO_HWACCEL_COPYAREA - hardware moves
* FBINFO_HWACCEL_FILLRECT - hardware fills
* FBINFO_HWACCEL_IMAGEBLIT - hardware mono->color expansion
* FBINFO_HWACCEL_YPAN - hardware can pan display in y-axis
* FBINFO_HWACCEL_YWRAP - hardware can wrap display in y-axis
* FBINFO_HWACCEL_DISABLED - supports hardware accels, but disabled
* FBINFO_READS_FAST - if set, prefer moves over mono->color expansion
* FBINFO_MISC_TILEBLITTING - hardware can do tile blits
*
* NOTE: These are for fbcon use only.
*/
info->flags = FBINFO_DEFAULT;
/********************* This stage is optional ******************************/
/*
* The struct pixmap is a scratch pad for the drawing functions. This
* is where the monochrome bitmap is constructed by the higher layers
* and then passed to the accelerator. For drivers that uses
* cfb_imageblit, you can skip this part. For those that have a more
* rigorous requirement, this stage is needed
*/
/* PIXMAP_SIZE should be small enough to optimize drawing, but not
* large enough that memory is wasted. A safe size is
* (max_xres * max_font_height/8). max_xres is driver dependent,
* max_font_height is 32.
*/
info->pixmap.addr = kmalloc(PIXMAP_SIZE, GFP_KERNEL);
if (!info->pixmap.addr) {
/* goto error */
}
info->pixmap.size = PIXMAP_SIZE;
/*
* FB_PIXMAP_SYSTEM - memory is in system ram
* FB_PIXMAP_IO - memory is iomapped
* FB_PIXMAP_SYNC - if set, will call fb_sync() per access to pixmap,
* usually if FB_PIXMAP_IO is set.
*
* Currently, FB_PIXMAP_IO is unimplemented.
*/
info->pixmap.flags = FB_PIXMAP_SYSTEM;
/*
* scan_align is the number of padding for each scanline. It is in bytes.
* Thus for accelerators that need padding to the next u32, put 4 here.
*/
info->pixmap.scan_align = 4;
/*
* buf_align is the amount to be padded for the buffer. For example,
* the i810fb needs a scan_align of 2 but expects it to be fed with
* dwords, so a buf_align = 4 is required.
*/
info->pixmap.buf_align = 4;
/* access_align is how many bits can be accessed from the framebuffer
* ie. some epson cards allow 16-bit access only. Most drivers will
* be safe with u32 here.
*
* NOTE: This field is currently unused.
*/
info->pixmap.scan_align = 32;
/***************************** End optional stage ***************************/
/*
* This should give a reasonable default video mode. The following is
* done when we can set a video mode.
*/
if (!mode_option)
mode_option = "640x480@60";
retval = fb_find_mode(&info->var, info, mode_option, NULL, 0, NULL, 8);
if (!retval || retval == 4)
return -EINVAL;
/* This has to been done !!! */
fb_alloc_cmap(&info->cmap, cmap_len, 0);
/*
* The following is done in the case of having hardware with a static
* mode. If we are setting the mode ourselves we don't call this.
*/
info->var = xxxfb_var;
/*
* For drivers that can...
*/
xxxfb_check_var(&info->var, info);
/*
* Does a call to fb_set_par() before register_framebuffer needed? This
* will depend on you and the hardware. If you are sure that your driver
* is the only device in the system, a call to fb_set_par() is safe.
*
* Hardware in x86 systems has a VGA core. Calling set_par() at this
* point will corrupt the VGA console, so it might be safer to skip a
* call to set_par here and just allow fbcon to do it for you.
*/
/* xxxfb_set_par(info); */
if (register_framebuffer(info) < 0)
return -EINVAL;
printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node,
info->fix.id);
pci_set_drvdata(dev, info); /* or dev_set_drvdata(device, info) */
return 0;
}
/*
* Cleanup
*/
/* static void __devexit xxxfb_remove(struct device *device) */
static void __devexit xxxfb_remove(struct pci_dev *dev)
{
struct fb_info *info = pci_get_drvdata(dev);
/* or dev_get_drvdata(device); */
if (info) {
unregister_framebuffer(info);
fb_dealloc_cmap(&info->cmap);
/* ... */
framebuffer_release(info);
}
return 0;
}
#ifdef CONFIG_PCI
#ifdef CONFIG_PM
/**
* xxxfb_suspend - Optional but recommended function. Suspend the device.
* @dev: PCI device
* @msg: the suspend event code.
*
* See Documentation/power/devices.txt for more information
*/
static int xxxfb_suspend(struct pci_dev *dev, pm_message_t msg)
{
struct fb_info *info = pci_get_drvdata(dev);
struct xxxfb_par *par = info->par;
/* suspend here */
return 0;
}
/**
* xxxfb_resume - Optional but recommended function. Resume the device.
* @dev: PCI device
*
* See Documentation/power/devices.txt for more information
*/
static int xxxfb_resume(struct pci_dev *dev)
{
struct fb_info *info = pci_get_drvdata(dev);
struct xxxfb_par *par = info->par;
/* resume here */
return 0;
}
#else
#define xxxfb_suspend NULL
#define xxxfb_resume NULL
#endif /* CONFIG_PM */
static struct pci_device_id xxxfb_id_table[] = {
{ PCI_VENDOR_ID_XXX, PCI_DEVICE_ID_XXX,
PCI_ANY_ID, PCI_ANY_ID, PCI_BASE_CLASS_DISPLAY << 16,
ADDR, 0 },
{ 0, }
};
/* For PCI drivers */
static struct pci_driver xxxfb_driver = {
.name = "xxxfb",
.id_table = xxxfb_id_table,
.probe = xxxfb_probe,
.remove = __devexit_p(xxxfb_remove),
.suspend = xxxfb_suspend, /* optional but recommended */
.resume = xxxfb_resume, /* optional but recommended */
};
int __init xxxfb_init(void)
{
/*
* For kernel boot options (in 'video=xxxfb:<options>' format)
*/
#ifndef MODULE
char *option = NULL;
if (fb_get_options("xxxfb", &option))
return -ENODEV;
xxxfb_setup(option);
#endif
return pci_register_driver(&xxxfb_driver);
}
static void __exit xxxfb_exit(void)
{
pci_unregister_driver(&xxxfb_driver);
}
#else /* non PCI, platform drivers */
#include <linux/platform_device.h>
/* for platform devices */
#ifdef CONFIG_PM
/**
* xxxfb_suspend - Optional but recommended function. Suspend the device.
* @dev: platform device
* @msg: the suspend event code.
*
* See Documentation/power/devices.txt for more information
*/
static int xxxfb_suspend(struct platform_device *dev, pm_message_t msg)
{
struct fb_info *info = platform_get_drvdata(dev);
struct xxxfb_par *par = info->par;
/* suspend here */
return 0;
}
/**
* xxxfb_resume - Optional but recommended function. Resume the device.
* @dev: platform device
*
* See Documentation/power/devices.txt for more information
*/
static int xxxfb_resume(struct platform_dev *dev)
{
struct fb_info *info = platform_get_drvdata(dev);
struct xxxfb_par *par = info->par;
/* resume here */
return 0;
}
#else
#define xxxfb_suspend NULL
#define xxxfb_resume NULL
#endif /* CONFIG_PM */
static struct device_driver xxxfb_driver = {
.name = "xxxfb",
.bus = &platform_bus_type,
.probe = xxxfb_probe,
.remove = xxxfb_remove,
.suspend = xxxfb_suspend, /* optional but recommended */
.resume = xxxfb_resume, /* optional but recommended */
};
static struct platform_device xxxfb_device = {
.name = "xxxfb",
};
static int __init xxxfb_init(void)
{
int ret;
/*
* For kernel boot options (in 'video=xxxfb:<options>' format)
*/
#ifndef MODULE
char *option = NULL;
if (fb_get_options("xxxfb", &option))
return -ENODEV;
xxxfb_setup(option);
#endif
ret = driver_register(&xxxfb_driver);
if (!ret) {
ret = platform_device_register(&xxxfb_device);
if (ret)
driver_unregister(&xxxfb_driver);
}
return ret;
}
static void __exit xxxfb_exit(void)
{
platform_device_unregister(&xxxfb_device);
driver_unregister(&xxxfb_driver);
}
#endif /* CONFIG_PCI */
#ifdef MODULE
/*
* Setup
*/
/*
* Only necessary if your driver takes special options,
* otherwise we fall back on the generic fb_setup().
*/
int __init xxxfb_setup(char *options)
{
/* Parse user speficied options (`video=xxxfb:') */
}
#endif /* MODULE *?
/* ------------------------------------------------------------------------- */
/*
* Modularization
*/
module_init(xxxfb_init);
module_exit(xxxfb_remove);
MODULE_LICENSE("GPL");
