/*
* HDMI PHY
*
* Copyright (C) 2013 Texas Instruments Incorporated
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/platform_device.h>
#include <video/omapdss.h>
#include "dss.h"
#include "hdmi.h"
void hdmi_phy_dump(struct hdmi_phy_data *phy, struct seq_file *s)
{
#define DUMPPHY(r) seq_printf(s, "%-35s %08x\n", #r,\
hdmi_read_reg(phy->base, r))
DUMPPHY(HDMI_TXPHY_TX_CTRL);
DUMPPHY(HDMI_TXPHY_DIGITAL_CTRL);
DUMPPHY(HDMI_TXPHY_POWER_CTRL);
DUMPPHY(HDMI_TXPHY_PAD_CFG_CTRL);
}
static irqreturn_t hdmi_irq_handler(int irq, void *data)
{
struct hdmi_wp_data *wp = data;
u32 irqstatus;
irqstatus = hdmi_wp_get_irqstatus(wp);
hdmi_wp_set_irqstatus(wp, irqstatus);
if ((irqstatus & HDMI_IRQ_LINK_CONNECT) &&
irqstatus & HDMI_IRQ_LINK_DISCONNECT) {
/*
* If we get both connect and disconnect interrupts at the same
* time, turn off the PHY, clear interrupts, and restart, which
* raises connect interrupt if a cable is connected, or nothing
* if cable is not connected.
*/
hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_OFF);
hdmi_wp_set_irqstatus(wp, HDMI_IRQ_LINK_CONNECT |
HDMI_IRQ_LINK_DISCONNECT);
hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_LDOON);
} else if (irqstatus & HDMI_IRQ_LINK_CONNECT) {
hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_TXON);
} else if (irqstatus & HDMI_IRQ_LINK_DISCONNECT) {
hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_LDOON);
}
return IRQ_HANDLED;
}
int hdmi_phy_enable(struct hdmi_phy_data *phy, struct hdmi_wp_data *wp,
struct hdmi_config *cfg)
{
u16 r = 0;
u32 irqstatus;
hdmi_wp_clear_irqenable(wp, 0xffffffff);
irqstatus = hdmi_wp_get_irqstatus(wp);
hdmi_wp_set_irqstatus(wp, irqstatus);
r = hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_LDOON);
if (r)
return r;
/*
* Read address 0 in order to get the SCP reset done completed
* Dummy access performed to make sure reset is done
*/
hdmi_read_reg(phy->base, HDMI_TXPHY_TX_CTRL);
/*
* Write to phy address 0 to configure the clock
* use HFBITCLK write HDMI_TXPHY_TX_CONTROL_FREQOUT field
*/
REG_FLD_MOD(phy->base, HDMI_TXPHY_TX_CTRL, 0x1, 31, 30);
/* Write to phy address 1 to start HDMI line (TXVALID and TMDSCLKEN) */
hdmi_write_reg(phy->base, HDMI_TXPHY_DIGITAL_CTRL, 0xF0000000);
/* Setup max LDO voltage */
REG_FLD_MOD(phy->base, HDMI_TXPHY_POWER_CTRL, 0xB, 3, 0);
/* Write to phy address 3 to change the polarity control */
REG_FLD_MOD(phy->base, HDMI_TXPHY_PAD_CFG_CTRL, 0x1, 27, 27);
r = request_threaded_irq(phy->irq, NULL, hdmi_irq_handler,
IRQF_ONESHOT, "OMAP HDMI", wp);
if (r) {
DSSERR("HDMI IRQ request failed\n");
hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_OFF);
return r;
}
hdmi_wp_set_irqenable(wp,
HDMI_IRQ_LINK_CONNECT | HDMI_IRQ_LINK_DISCONNECT);
return 0;
}
void hdmi_phy_disable(struct hdmi_phy_data *phy, struct hdmi_wp_data *wp)
{
free_irq(phy->irq, wp);
hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_OFF);
}
#define PHY_OFFSET 0x300
#define PHY_SIZE 0x100
int hdmi_phy_init(struct platform_device *pdev, struct hdmi_phy_data *phy)
{
struct resource *res;
struct resource temp_res;
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy");
if (!res) {
DSSDBG("can't get PHY mem resource by name\n");
/*
* if hwmod/DT doesn't have the memory resource information
* split into HDMI sub blocks by name, we try again by getting
* the platform's first resource. this code will be removed when
* the driver can get the mem resources by name
*/
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
DSSERR("can't get PHY mem resource\n");
return -EINVAL;
}
temp_res.start = res->start + PHY_OFFSET;
temp_res.end = temp_res.start + PHY_SIZE - 1;
res = &temp_res;
}
phy->base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
if (!phy->base) {
DSSERR("can't ioremap TX PHY\n");
return -ENOMEM;
}
phy->irq = platform_get_irq(pdev, 0);
if (phy->irq < 0) {
DSSERR("platform_get_irq failed\n");
return -ENODEV;
}
return 0;
}
