/*-*- linux-c -*-
* linux/drivers/video/i810fb_main.h -- Intel 810 frame buffer device
* main header file
*
* Copyright (C) 2001 Antonino Daplas<adaplas@pol.net>
* All Rights Reserved
*
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive for
* more details.
*/
#ifndef __I810_MAIN_H__
#define __I810_MAIN_H__
static int __devinit i810fb_init_pci (struct pci_dev *dev,
const struct pci_device_id *entry);
static void __exit i810fb_remove_pci(struct pci_dev *dev);
static int i810fb_resume(struct pci_dev *dev);
static int i810fb_suspend(struct pci_dev *dev, pm_message_t state);
/*
* voffset - framebuffer offset in MiB from aperture start address. In order for
* the driver to work with X, we must try to use memory holes left untouched by X. The
* following table lists where X's different surfaces start at.
*
* ---------------------------------------------
* : : 64 MiB : 32 MiB :
* ----------------------------------------------
* : FrontBuffer : 0 : 0 :
* : DepthBuffer : 48 : 16 :
* : BackBuffer : 56 : 24 :
* ----------------------------------------------
*
* So for chipsets with 64 MiB Aperture sizes, 32 MiB for v_offset is okay, allowing up to
* 15 + 1 MiB of Framebuffer memory. For 32 MiB Aperture sizes, a v_offset of 8 MiB should
* work, allowing 7 + 1 MiB of Framebuffer memory.
* Note, the size of the hole may change depending on how much memory you allocate to X,
* and how the memory is split up between these surfaces.
*
* Note: Anytime the DepthBuffer or FrontBuffer is overlapped, X would still run but with
* DRI disabled. But if the Frontbuffer is overlapped, X will fail to load.
*
* Experiment with v_offset to find out which works best for you.
*/
static u32 v_offset_default __initdata; /* For 32 MiB Aper size, 8 should be the default */
static u32 voffset __initdata = 0;
static int i810fb_cursor(struct fb_info *info, struct fb_cursor *cursor);
/* Chipset Specific Functions */
static int i810fb_set_par (struct fb_info *info);
static int i810fb_getcolreg (u8 regno, u8 *red, u8 *green, u8 *blue,
u8 *transp, struct fb_info *info);
static int i810fb_setcolreg (unsigned regno, unsigned red, unsigned green, unsigned blue,
unsigned transp, struct fb_info *info);
static int i810fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info);
static int i810fb_blank (int blank_mode, struct fb_info *info);
/* Initialization */
static void i810fb_release_resource (struct fb_info *info, struct i810fb_par *par);
extern int __init agp_intel_init(void);
/* Video Timings */
extern void round_off_xres (u32 *xres);
extern void round_off_yres (u32 *xres, u32 *yres);
extern u32 i810_get_watermark (const struct fb_var_screeninfo *var,
struct i810fb_par *par);
extern void i810fb_encode_registers(const struct fb_var_screeninfo *var,
struct i810fb_par *par, u32 xres, u32 yres);
extern void i810fb_fill_var_timings(struct fb_var_screeninfo *var);
/* Accelerated Functions */
extern void i810fb_fillrect (struct fb_info *p,
const struct fb_fillrect *rect);
extern void i810fb_copyarea (struct fb_info *p,
const struct fb_copyarea *region);
extern void i810fb_imageblit(struct fb_info *p, const struct fb_image *image);
extern int i810fb_sync (struct fb_info *p);
extern void i810fb_init_ringbuffer(struct fb_info *info);
extern void i810fb_load_front (u32 offset, struct fb_info *info);
#ifdef CONFIG_FB_I810_I2C
/* I2C */
extern int i810_probe_i2c_connector(struct fb_info *info, u8 **out_edid,
int conn);
extern void i810_create_i2c_busses(struct i810fb_par *par);
extern void i810_delete_i2c_busses(struct i810fb_par *par);
#else
static inline int i810_probe_i2c_connector(struct fb_info *info, u8 **out_edid,
int conn)
{
return 1;
}
static inline void i810_create_i2c_busses(struct i810fb_par *par) { }
static inline void i810_delete_i2c_busses(struct i810fb_par *par) { }
#endif
/* Conditionals */
#ifdef CONFIG_X86
inline void flush_cache(void)
{
asm volatile ("wbinvd":::"memory");
}
#else
#define flush_cache() do { } while(0)
#endif
#ifdef CONFIG_MTRR
#define KERNEL_HAS_MTRR 1
static inline void __devinit set_mtrr(struct i810fb_par *par)
{
par->mtrr_reg = mtrr_add((u32) par->aperture.physical,
par->aperture.size, MTRR_TYPE_WRCOMB, 1);
if (par->mtrr_reg < 0) {
printk(KERN_ERR "set_mtrr: unable to set MTRR\n");
return;
}
par->dev_flags |= HAS_MTRR;
}
static inline void unset_mtrr(struct i810fb_par *par)
{
if (par->dev_flags & HAS_MTRR)
mtrr_del(par->mtrr_reg, (u32) par->aperture.physical,
par->aperture.size);
}
#else
#define KERNEL_HAS_MTRR 0
#define set_mtrr(x) printk("set_mtrr: MTRR is disabled in the kernel\n")
#define unset_mtrr(x) do { } while (0)
#endif /* CONFIG_MTRR */
#ifdef CONFIG_FB_I810_GTF
#define IS_DVT (0)
#else
#define IS_DVT (1)
#endif
#endif /* __I810_MAIN_H__ */
