/*
* Backlight control code for Sharp Zaurus SL-5500
*
* Copyright 2005 John Lenz <lenz@cs.wisc.edu>
* Maintainer: Pavel Machek <pavel@suse.cz> (unless John wants to :-)
* GPL v2
*
* This driver assumes single CPU. That's okay, because collie is
* slightly old hardware, and noone is going to retrofit second CPU to
* old PDA.
*/
/* LCD power functions */
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/interrupt.h>
#include <linux/fb.h>
#include <linux/backlight.h>
#include <asm/hardware/locomo.h>
#include <asm/irq.h>
#include <asm/mach/sharpsl_param.h>
#include <asm/mach-types.h>
#include "../../../arch/arm/mach-sa1100/generic.h"
static struct backlight_device *locomolcd_bl_device;
static struct locomo_dev *locomolcd_dev;
static unsigned long locomolcd_flags;
#define LOCOMOLCD_SUSPENDED 0x01
static void locomolcd_on(int comadj)
{
locomo_gpio_set_dir(locomolcd_dev, LOCOMO_GPIO_LCD_VSHA_ON, 0);
locomo_gpio_write(locomolcd_dev, LOCOMO_GPIO_LCD_VSHA_ON, 1);
mdelay(2);
locomo_gpio_set_dir(locomolcd_dev, LOCOMO_GPIO_LCD_VSHD_ON, 0);
locomo_gpio_write(locomolcd_dev, LOCOMO_GPIO_LCD_VSHD_ON, 1);
mdelay(2);
locomo_m62332_senddata(locomolcd_dev, comadj, 0);
mdelay(5);
locomo_gpio_set_dir(locomolcd_dev, LOCOMO_GPIO_LCD_VEE_ON, 0);
locomo_gpio_write(locomolcd_dev, LOCOMO_GPIO_LCD_VEE_ON, 1);
mdelay(10);
/* TFTCRST | CPSOUT=0 | CPSEN */
locomo_writel(0x01, locomolcd_dev->mapbase + LOCOMO_TC);
/* Set CPSD */
locomo_writel(6, locomolcd_dev->mapbase + LOCOMO_CPSD);
/* TFTCRST | CPSOUT=0 | CPSEN */
locomo_writel((0x04 | 0x01), locomolcd_dev->mapbase + LOCOMO_TC);
mdelay(10);
locomo_gpio_set_dir(locomolcd_dev, LOCOMO_GPIO_LCD_MOD, 0);
locomo_gpio_write(locomolcd_dev, LOCOMO_GPIO_LCD_MOD, 1);
}
static void locomolcd_off(int comadj)
{
/* TFTCRST=1 | CPSOUT=1 | CPSEN = 0 */
locomo_writel(0x06, locomolcd_dev->mapbase + LOCOMO_TC);
mdelay(1);
locomo_gpio_write(locomolcd_dev, LOCOMO_GPIO_LCD_VSHA_ON, 0);
mdelay(110);
locomo_gpio_write(locomolcd_dev, LOCOMO_GPIO_LCD_VEE_ON, 0);
mdelay(700);
/* TFTCRST=0 | CPSOUT=0 | CPSEN = 0 */
locomo_writel(0, locomolcd_dev->mapbase + LOCOMO_TC);
locomo_gpio_write(locomolcd_dev, LOCOMO_GPIO_LCD_MOD, 0);
locomo_gpio_write(locomolcd_dev, LOCOMO_GPIO_LCD_VSHD_ON, 0);
}
void locomolcd_power(int on)
{
int comadj = sharpsl_param.comadj;
unsigned long flags;
local_irq_save(flags);
if (!locomolcd_dev) {
local_irq_restore(flags);
return;
}
/* read comadj */
if (comadj == -1 && machine_is_collie())
comadj = 128;
if (comadj == -1 && machine_is_poodle())
comadj = 118;
if (on)
locomolcd_on(comadj);
else
locomolcd_off(comadj);
local_irq_restore(flags);
}
EXPORT_SYMBOL(locomolcd_power);
static int current_intensity;
static int locomolcd_set_intensity(struct backlight_device *bd)
{
int intensity = bd->props->brightness;
if (bd->props->power != FB_BLANK_UNBLANK)
intensity = 0;
if (bd->props->fb_blank != FB_BLANK_UNBLANK)
intensity = 0;
if (locomolcd_flags & LOCOMOLCD_SUSPENDED)
intensity = 0;
switch (intensity) {
/* AC and non-AC are handled differently, but produce same results in sharp code? */
case 0: locomo_frontlight_set(locomolcd_dev, 0, 0, 161); break;
case 1: locomo_frontlight_set(locomolcd_dev, 117, 0, 161); break;
case 2: locomo_frontlight_set(locomolcd_dev, 163, 0, 148); break;
case 3: locomo_frontlight_set(locomolcd_dev, 194, 0, 161); break;
case 4: locomo_frontlight_set(locomolcd_dev, 194, 1, 161); break;
default:
return -ENODEV;
}
current_intensity = intensity;
return 0;
}
static int locomolcd_get_intensity(struct backlight_device *bd)
{
return current_intensity;
}
static struct backlight_properties locomobl_data = {
.owner = THIS_MODULE,
.get_brightness = locomolcd_get_intensity,
.update_status = locomolcd_set_intensity,
.max_brightness = 4,
};
#ifdef CONFIG_PM
static int locomolcd_suspend(struct locomo_dev *dev, pm_message_t state)
{
locomolcd_flags |= LOCOMOLCD_SUSPENDED;
locomolcd_set_intensity(locomolcd_bl_device);
return 0;
}
static int locomolcd_resume(struct locomo_dev *dev)
{
locomolcd_flags &= ~LOCOMOLCD_SUSPENDED;
locomolcd_set_intensity(locomolcd_bl_device);
return 0;
}
#else
#define locomolcd_suspend NULL
#define locomolcd_resume NULL
#endif
static int locomolcd_probe(struct locomo_dev *dev)
{
unsigned long flags;
local_irq_save(flags);
locomolcd_dev = dev;
locomo_gpio_set_dir(dev, LOCOMO_GPIO_FL_VR, 0);
/* the poodle_lcd_power function is called for the first time
* from fs_initcall, which is before locomo is activated.
* We need to recall poodle_lcd_power here*/
if (machine_is_poodle())
locomolcd_power(1);
local_irq_restore(flags);
locomolcd_bl_device = backlight_device_register("locomo-bl", NULL, &locomobl_data);
if (IS_ERR (locomolcd_bl_device))
return PTR_ERR (locomolcd_bl_device);
/* Set up frontlight so that screen is readable */
locomobl_data.brightness = 2;
locomolcd_set_intensity(locomolcd_bl_device);
return 0;
}
static int locomolcd_remove(struct locomo_dev *dev)
{
unsigned long flags;
backlight_device_unregister(locomolcd_bl_device);
local_irq_save(flags);
locomolcd_dev = NULL;
local_irq_restore(flags);
return 0;
}
static struct locomo_driver poodle_lcd_driver = {
.drv = {
.name = "locomo-backlight",
},
.devid = LOCOMO_DEVID_BACKLIGHT,
.probe = locomolcd_probe,
.remove = locomolcd_remove,
.suspend = locomolcd_suspend,
.resume = locomolcd_resume,
};
static int __init locomolcd_init(void)
{
int ret = locomo_driver_register(&poodle_lcd_driver);
if (ret)
return ret;
#ifdef CONFIG_SA1100_COLLIE
sa1100fb_lcd_power = locomolcd_power;
#endif
return 0;
}
static void __exit locomolcd_exit(void)
{
locomo_driver_unregister(&poodle_lcd_driver);
}
module_init(locomolcd_init);
module_exit(locomolcd_exit);
MODULE_AUTHOR("John Lenz <lenz@cs.wisc.edu>, Pavel Machek <pavel@suse.cz>");
MODULE_DESCRIPTION("Collie LCD driver");
MODULE_LICENSE("GPL");
