/*
* USB ATI Remote support
*
* Version 2.2.0 Copyright (c) 2004 Torrey Hoffman <thoffman@arnor.net>
* Version 2.1.1 Copyright (c) 2002 Vladimir Dergachev
*
* This 2.2.0 version is a rewrite / cleanup of the 2.1.1 driver, including
* porting to the 2.6 kernel interfaces, along with other modification
* to better match the style of the existing usb/input drivers. However, the
* protocol and hardware handling is essentially unchanged from 2.1.1.
*
* The 2.1.1 driver was derived from the usbati_remote and usbkbd drivers by
* Vojtech Pavlik.
*
* Changes:
*
* Feb 2004: Torrey Hoffman <thoffman@arnor.net>
* Version 2.2.0
* Jun 2004: Torrey Hoffman <thoffman@arnor.net>
* Version 2.2.1
* Added key repeat support contributed by:
* Vincent Vanackere <vanackere@lif.univ-mrs.fr>
* Added support for the "Lola" remote contributed by:
* Seth Cohn <sethcohn@yahoo.com>
*
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
*
* Hardware & software notes
*
* These remote controls are distributed by ATI as part of their
* "All-In-Wonder" video card packages. The receiver self-identifies as a
* "USB Receiver" with manufacturer "X10 Wireless Technology Inc".
*
* The "Lola" remote is available from X10. See:
* http://www.x10.com/products/lola_sg1.htm
* The Lola is similar to the ATI remote but has no mouse support, and slightly
* different keys.
*
* It is possible to use multiple receivers and remotes on multiple computers
* simultaneously by configuring them to use specific channels.
*
* The RF protocol used by the remote supports 16 distinct channels, 1 to 16.
* Actually, it may even support more, at least in some revisions of the
* hardware.
*
* Each remote can be configured to transmit on one channel as follows:
* - Press and hold the "hand icon" button.
* - When the red LED starts to blink, let go of the "hand icon" button.
* - When it stops blinking, input the channel code as two digits, from 01
* to 16, and press the hand icon again.
*
* The timing can be a little tricky. Try loading the module with debug=1
* to have the kernel print out messages about the remote control number
* and mask. Note: debugging prints remote numbers as zero-based hexadecimal.
*
* The driver has a "channel_mask" parameter. This bitmask specifies which
* channels will be ignored by the module. To mask out channels, just add
* all the 2^channel_number values together.
*
* For instance, set channel_mask = 2^4 = 16 (binary 10000) to make ati_remote
* ignore signals coming from remote controls transmitting on channel 4, but
* accept all other channels.
*
* Or, set channel_mask = 65533, (0xFFFD), and all channels except 1 will be
* ignored.
*
* The default is 0 (respond to all channels). Bit 0 and bits 17-32 of this
* parameter are unused.
*
*/
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/input.h>
#include <linux/usb.h>
#include <linux/wait.h>
/*
* Module and Version Information, Module Parameters
*/
#define ATI_REMOTE_VENDOR_ID 0x0bc7
#define ATI_REMOTE_PRODUCT_ID 0x004
#define LOLA_REMOTE_PRODUCT_ID 0x002
#define MEDION_REMOTE_PRODUCT_ID 0x006
#define DRIVER_VERSION "2.2.1"
#define DRIVER_AUTHOR "Torrey Hoffman <thoffman@arnor.net>"
#define DRIVER_DESC "ATI/X10 RF USB Remote Control"
#define NAME_BUFSIZE 80 /* size of product name, path buffers */
#define DATA_BUFSIZE 63 /* size of URB data buffers */
#define ATI_INPUTNUM 1 /* Which input device to register as */
static unsigned long channel_mask;
module_param(channel_mask, ulong, 0444);
MODULE_PARM_DESC(channel_mask, "Bitmask of remote control channels to ignore");
static int debug;
module_param(debug, int, 0444);
MODULE_PARM_DESC(debug, "Enable extra debug messages and information");
#define dbginfo(dev, format, arg...) do { if (debug) dev_info(dev , format , ## arg); } while (0)
#undef err
#define err(format, arg...) printk(KERN_ERR format , ## arg)
static struct usb_device_id ati_remote_table[] = {
{ USB_DEVICE(ATI_REMOTE_VENDOR_ID, ATI_REMOTE_PRODUCT_ID) },
{ USB_DEVICE(ATI_REMOTE_VENDOR_ID, LOLA_REMOTE_PRODUCT_ID) },
{ USB_DEVICE(ATI_REMOTE_VENDOR_ID, MEDION_REMOTE_PRODUCT_ID) },
{} /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, ati_remote_table);
/* Get hi and low bytes of a 16-bits int */
#define HI(a) ((unsigned char)((a) >> 8))
#define LO(a) ((unsigned char)((a) & 0xff))
#define SEND_FLAG_IN_PROGRESS 1
#define SEND_FLAG_COMPLETE 2
/* Device initialization strings */
static char init1[] = { 0x01, 0x00, 0x20, 0x14 };
static char init2[] = { 0x01, 0x00, 0x20, 0x14, 0x20, 0x20, 0x20 };
/* Acceleration curve for directional control pad */
static char accel[] = { 1, 2, 4, 6, 9, 13, 20 };
/* Duplicate event filtering time.
* Sequential, identical KIND_FILTERED inputs with less than
* FILTER_TIME jiffies between them are considered as repeat
* events. The hardware generates 5 events for the first keypress
* and we have to take this into account for an accurate repeat
* behaviour.
* (HZ / 20) == 50 ms and works well for me.
*/
#define FILTER_TIME (HZ / 20)
static DECLARE_MUTEX(disconnect_sem);
struct ati_remote {
struct input_dev idev;
struct usb_device *udev;
struct usb_interface *interface;
struct urb *irq_urb;
struct urb *out_urb;
struct usb_endpoint_descriptor *endpoint_in;
struct usb_endpoint_descriptor *endpoint_out;
unsigned char *inbuf;
unsigned char *outbuf;
dma_addr_t inbuf_dma;
dma_addr_t outbuf_dma;
unsigned char old_data[2]; /* Detect duplicate events */
unsigned long old_jiffies;
unsigned long acc_jiffies; /* handle acceleration */
unsigned int repeat_count;
char name[NAME_BUFSIZE];
char phys[NAME_BUFSIZE];
wait_queue_head_t wait;
int send_flags;
};
/* "Kinds" of messages sent from the hardware to the driver. */
#define KIND_END 0
#define KIND_LITERAL 1 /* Simply pass to input system */
#define KIND_FILTERED 2 /* Add artificial key-up events, drop keyrepeats */
#define KIND_LU 3 /* Directional keypad diagonals - left up, */
#define KIND_RU 4 /* right up, */
#define KIND_LD 5 /* left down, */
#define KIND_RD 6 /* right down */
#define KIND_ACCEL 7 /* Directional keypad - left, right, up, down.*/
/* Translation table from hardware messages to input events. */
static struct
{
short kind;
unsigned char data1, data2;
int type;
unsigned int code;
int value;
} ati_remote_tbl[] =
{
/* Directional control pad axes */
{KIND_ACCEL, 0x35, 0x70, EV_REL, REL_X, -1}, /* left */
{KIND_ACCEL, 0x36, 0x71, EV_REL, REL_X, 1}, /* right */
{KIND_ACCEL, 0x37, 0x72, EV_REL, REL_Y, -1}, /* up */
{KIND_ACCEL, 0x38, 0x73, EV_REL, REL_Y, 1}, /* down */
/* Directional control pad diagonals */
{KIND_LU, 0x39, 0x74, EV_REL, 0, 0}, /* left up */
{KIND_RU, 0x3a, 0x75, EV_REL, 0, 0}, /* right up */
{KIND_LD, 0x3c, 0x77, EV_REL, 0, 0}, /* left down */
{KIND_RD, 0x3b, 0x76, EV_REL, 0, 0}, /* right down */
/* "Mouse button" buttons */
{KIND_LITERAL, 0x3d, 0x78, EV_KEY, BTN_LEFT, 1}, /* left btn down */
{KIND_LITERAL, 0x3e, 0x79, EV_KEY, BTN_LEFT, 0}, /* left btn up */
{KIND_LITERAL, 0x41, 0x7c, EV_KEY, BTN_RIGHT, 1},/* right btn down */
{KIND_LITERAL, 0x42, 0x7d, EV_KEY, BTN_RIGHT, 0},/* right btn up */
/* Artificial "doubleclick" events are generated by the hardware.
* They are mapped to the "side" and "extra" mouse buttons here. */
{KIND_FILTERED, 0x3f, 0x7a, EV_KEY, BTN_SIDE, 1}, /* left dblclick */
{KIND_FILTERED, 0x43, 0x7e, EV_KEY, BTN_EXTRA, 1},/* right dblclick */
/* keyboard. */
{KIND_FILTERED, 0xd2, 0x0d, EV_KEY, KEY_1, 1},
{KIND_FILTERED, 0xd3, 0x0e, EV_KEY, KEY_2, 1},
{KIND_FILTERED, 0xd4, 0x0f, EV_KEY, KEY_3, 1},
{KIND_FILTERED, 0xd5, 0x10, EV_KEY, KEY_4, 1},
{KIND_FILTERED, 0xd6, 0x11, EV_KEY, KEY_5, 1},
{KIND_FILTERED, 0xd7, 0x12, EV_KEY, KEY_6, 1},
{KIND_FILTERED, 0xd8, 0x13, EV_KEY, KEY_7, 1},
{KIND_FILTERED, 0xd9, 0x14, EV_KEY, KEY_8, 1},
{KIND_FILTERED, 0xda, 0x15, EV_KEY, KEY_9, 1},
{KIND_FILTERED, 0xdc, 0x17, EV_KEY, KEY_0, 1},
{KIND_FILTERED, 0xc5, 0x00, EV_KEY, KEY_A, 1},
{KIND_FILTERED, 0xc6, 0x01, EV_KEY, KEY_B, 1},
{KIND_FILTERED, 0xde, 0x19, EV_KEY, KEY_C, 1},
{KIND_FILTERED, 0xe0, 0x1b, EV_KEY, KEY_D, 1},
{KIND_FILTERED, 0xe6, 0x21, EV_KEY, KEY_E, 1},
{KIND_FILTERED, 0xe8, 0x23, EV_KEY, KEY_F, 1},
/* "special" keys */
{KIND_FILTERED, 0xdd, 0x18, EV_KEY, KEY_KPENTER, 1}, /* "check" */
{KIND_FILTERED, 0xdb, 0x16, EV_KEY, KEY_MENU, 1}, /* "menu" */
{KIND_FILTERED, 0xc7, 0x02, EV_KEY, KEY_POWER, 1}, /* Power */
{KIND_FILTERED, 0xc8, 0x03, EV_KEY, KEY_TV, 1}, /* TV */
{KIND_FILTERED, 0xc9, 0x04, EV_KEY, KEY_DVD, 1}, /* DVD */
{KIND_FILTERED, 0xca, 0x05, EV_KEY, KEY_WWW, 1}, /* WEB */
{KIND_FILTERED, 0xcb, 0x06, EV_KEY, KEY_BOOKMARKS, 1}, /* "book" */
{KIND_FILTERED, 0xcc, 0x07, EV_KEY, KEY_EDIT, 1}, /* "hand" */
{KIND_FILTERED, 0xe1, 0x1c, EV_KEY, KEY_COFFEE, 1}, /* "timer" */
{KIND_FILTERED, 0xe5, 0x20, EV_KEY, KEY_FRONT, 1}, /* "max" */
{KIND_FILTERED, 0xe2, 0x1d, EV_KEY, KEY_LEFT, 1}, /* left */
{KIND_FILTERED, 0xe4, 0x1f, EV_KEY, KEY_RIGHT, 1}, /* right */
{KIND_FILTERED, 0xe7, 0x22, EV_KEY, KEY_DOWN, 1}, /* down */
{KIND_FILTERED, 0xdf, 0x1a, EV_KEY, KEY_UP, 1}, /* up */
{KIND_FILTERED, 0xe3, 0x1e, EV_KEY, KEY_OK, 1}, /* "OK" */
{KIND_FILTERED, 0xce, 0x09, EV_KEY, KEY_VOLUMEDOWN, 1}, /* VOL + */
{KIND_FILTERED, 0xcd, 0x08, EV_KEY, KEY_VOLUMEUP, 1}, /* VOL - */
{KIND_FILTERED, 0xcf, 0x0a, EV_KEY, KEY_MUTE, 1}, /* MUTE */
{KIND_FILTERED, 0xd0, 0x0b, EV_KEY, KEY_CHANNELUP, 1}, /* CH + */
{KIND_FILTERED, 0xd1, 0x0c, EV_KEY, KEY_CHANNELDOWN, 1},/* CH - */
{KIND_FILTERED, 0xec, 0x27, EV_KEY, KEY_RECORD, 1}, /* ( o) red */
{KIND_FILTERED, 0xea, 0x25, EV_KEY, KEY_PLAY, 1}, /* ( >) */
{KIND_FILTERED, 0xe9, 0x24, EV_KEY, KEY_REWIND, 1}, /* (<<) */
{KIND_FILTERED, 0xeb, 0x26, EV_KEY, KEY_FORWARD, 1}, /* (>>) */
{KIND_FILTERED, 0xed, 0x28, EV_KEY, KEY_STOP, 1}, /* ([]) */
{KIND_FILTERED, 0xee, 0x29, EV_KEY, KEY_PAUSE, 1}, /* ('') */
{KIND_FILTERED, 0xf0, 0x2b, EV_KEY, KEY_PREVIOUS, 1}, /* (<-) */
{KIND_FILTERED, 0xef, 0x2a, EV_KEY, KEY_NEXT, 1}, /* (>+) */
{KIND_FILTERED, 0xf2, 0x2D, EV_KEY, KEY_INFO, 1}, /* PLAYING */
{KIND_FILTERED, 0xf3, 0x2E, EV_KEY, KEY_HOME, 1}, /* TOP */
{KIND_FILTERED, 0xf4, 0x2F, EV_KEY, KEY_END, 1}, /* END */
{KIND_FILTERED, 0xf5, 0x30, EV_KEY, KEY_SELECT, 1}, /* SELECT */
{KIND_END, 0x00, 0x00, EV_MAX + 1, 0, 0}
};
/* Local function prototypes */
static void ati_remote_dump (unsigned char *data, unsigned int actual_length);
static void ati_remote_delete (struct ati_remote *dev);
static int ati_remote_open (struct input_dev *inputdev);
static void ati_remote_close (struct input_dev *inputdev);
static int ati_remote_sendpacket (struct ati_remote *ati_remote, u16 cmd, unsigned char *data);
static void ati_remote_irq_out (struct urb *urb, struct pt_regs *regs);
static void ati_remote_irq_in (struct urb *urb, struct pt_regs *regs);
static void ati_remote_input_report (struct urb *urb, struct pt_regs *regs);
static int ati_remote_initialize (struct ati_remote *ati_remote);
static int ati_remote_probe (struct usb_interface *interface, const struct usb_device_id *id);
static void ati_remote_disconnect (struct usb_interface *interface);
/* usb specific object to register with the usb subsystem */
static struct usb_driver ati_remote_driver = {
.owner = THIS_MODULE,
.name = "ati_remote",
.probe = ati_remote_probe,
.disconnect = ati_remote_disconnect,
.id_table = ati_remote_table,
};
/*
* ati_remote_dump_input
*/
static void ati_remote_dump(unsigned char *data, unsigned int len)
{
if ((len == 1) && (data[0] != (unsigned char)0xff) && (data[0] != 0x00))
warn("Weird byte 0x%02x", data[0]);
else if (len == 4)
warn("Weird key %02x %02x %02x %02x",
data[0], data[1], data[2], data[3]);
else
warn("Weird data, len=%d %02x %02x %02x %02x %02x %02x ...",
len, data[0], data[1], data[2], data[3], data[4], data[5]);
}
/*
* ati_remote_open
*/
static int ati_remote_open(struct input_dev *inputdev)
{
struct ati_remote *ati_remote = inputdev->private;
/* On first open, submit the read urb which was set up previously. */
ati_remote->irq_urb->dev = ati_remote->udev;
if (usb_submit_urb(ati_remote->irq_urb, GFP_KERNEL)) {
dev_err(&ati_remote->interface->dev,
"%s: usb_submit_urb failed!\n", __FUNCTION__);
return -EIO;
}
return 0;
}
/*
* ati_remote_close
*/
static void ati_remote_close(struct input_dev *inputdev)
{
struct ati_remote *ati_remote = inputdev->private;
usb_kill_urb(ati_remote->irq_urb);
}
/*
* ati_remote_irq_out
*/
static void ati_remote_irq_out(struct urb *urb, struct pt_regs *regs)
{
struct ati_remote *ati_remote = urb->context;
if (urb->status) {
dev_dbg(&ati_remote->interface->dev, "%s: status %d\n",
__FUNCTION__, urb->status);
return;
}
ati_remote->send_flags |= SEND_FLAG_COMPLETE;
wmb();
wake_up(&ati_remote->wait);
}
/*
* ati_remote_sendpacket
*
* Used to send device initialization strings
*/
static int ati_remote_sendpacket(struct ati_remote *ati_remote, u16 cmd, unsigned char *data)
{
int retval = 0;
/* Set up out_urb */
memcpy(ati_remote->out_urb->transfer_buffer + 1, data, LO(cmd));
((char *) ati_remote->out_urb->transfer_buffer)[0] = HI(cmd);
ati_remote->out_urb->transfer_buffer_length = LO(cmd) + 1;
ati_remote->out_urb->dev = ati_remote->udev;
ati_remote->send_flags = SEND_FLAG_IN_PROGRESS;
retval = usb_submit_urb(ati_remote->out_urb, GFP_ATOMIC);
if (retval) {
dev_dbg(&ati_remote->interface->dev,
"sendpacket: usb_submit_urb failed: %d\n", retval);
return retval;
}
wait_event_timeout(ati_remote->wait,
((ati_remote->out_urb->status != -EINPROGRESS) ||
(ati_remote->send_flags & SEND_FLAG_COMPLETE)),
HZ);
usb_kill_urb(ati_remote->out_urb);
return retval;
}
/*
* ati_remote_event_lookup
*/
static int ati_remote_event_lookup(int rem, unsigned char d1, unsigned char d2)
{
int i;
for (i = 0; ati_remote_tbl[i].kind != KIND_END; i++) {
/*
* Decide if the table entry matches the remote input.
*/
if ((((ati_remote_tbl[i].data1 & 0x0f) == (d1 & 0x0f))) &&
((((ati_remote_tbl[i].data1 >> 4) -
(d1 >> 4) + rem) & 0x0f) == 0x0f) &&
(ati_remote_tbl[i].data2 == d2))
return i;
}
return -1;
}
/*
* ati_remote_report_input
*/
static void ati_remote_input_report(struct urb *urb, struct pt_regs *regs)
{
struct ati_remote *ati_remote = urb->context;
unsigned char *data= ati_remote->inbuf;
struct input_dev *dev = &ati_remote->idev;
int index, acc;
int remote_num;
/* Deal with strange looking inputs */
if ( (urb->actual_length != 4) || (data[0] != 0x14) ||
((data[3] & 0x0f) != 0x00) ) {
ati_remote_dump(data, urb->actual_length);
return;
}
/* Mask unwanted remote channels. */
/* note: remote_num is 0-based, channel 1 on remote == 0 here */
remote_num = (data[3] >> 4) & 0x0f;
if (channel_mask & (1 << (remote_num + 1))) {
dbginfo(&ati_remote->interface->dev,
"Masked input from channel 0x%02x: data %02x,%02x, mask= 0x%02lx\n",
remote_num, data[1], data[2], channel_mask);
return;
}
/* Look up event code index in translation table */
index = ati_remote_event_lookup(remote_num, data[1], data[2]);
if (index < 0) {
dev_warn(&ati_remote->interface->dev,
"Unknown input from channel 0x%02x: data %02x,%02x\n",
remote_num, data[1], data[2]);
return;
}
dbginfo(&ati_remote->interface->dev,
"channel 0x%02x; data %02x,%02x; index %d; keycode %d\n",
remote_num, data[1], data[2], index, ati_remote_tbl[index].code);
if (ati_remote_tbl[index].kind == KIND_LITERAL) {
input_regs(dev, regs);
input_event(dev, ati_remote_tbl[index].type,
ati_remote_tbl[index].code,
ati_remote_tbl[index].value);
input_sync(dev);
ati_remote->old_jiffies = jiffies;
return;
}
if (ati_remote_tbl[index].kind == KIND_FILTERED) {
/* Filter duplicate events which happen "too close" together. */
if ((ati_remote->old_data[0] == data[1]) &&
(ati_remote->old_data[1] == data[2]) &&
((ati_remote->old_jiffies + FILTER_TIME) > jiffies)) {
ati_remote->repeat_count++;
} else {
ati_remote->repeat_count = 0;
}
ati_remote->old_data[0] = data[1];
ati_remote->old_data[1] = data[2];
ati_remote->old_jiffies = jiffies;
if ((ati_remote->repeat_count > 0)
&& (ati_remote->repeat_count < 5))
return;
input_regs(dev, regs);
input_event(dev, ati_remote_tbl[index].type,
ati_remote_tbl[index].code, 1);
input_event(dev, ati_remote_tbl[index].type,
ati_remote_tbl[index].code, 0);
input_sync(dev);
return;
}
/*
* Other event kinds are from the directional control pad, and have an
* acceleration factor applied to them. Without this acceleration, the
* control pad is mostly unusable.
*
* If elapsed time since last event is > 1/4 second, user "stopped",
* so reset acceleration. Otherwise, user is probably holding the control
* pad down, so we increase acceleration, ramping up over two seconds to
* a maximum speed. The acceleration curve is #defined above.
*/
if ((jiffies - ati_remote->old_jiffies) > (HZ >> 2)) {
acc = 1;
ati_remote->acc_jiffies = jiffies;
}
else if ((jiffies - ati_remote->acc_jiffies) < (HZ >> 3)) acc = accel[0];
else if ((jiffies - ati_remote->acc_jiffies) < (HZ >> 2)) acc = accel[1];
else if ((jiffies - ati_remote->acc_jiffies) < (HZ >> 1)) acc = accel[2];
else if ((jiffies - ati_remote->acc_jiffies) < HZ ) acc = accel[3];
else if ((jiffies - ati_remote->acc_jiffies) < HZ+(HZ>>1)) acc = accel[4];
else if ((jiffies - ati_remote->acc_jiffies) < (HZ << 1)) acc = accel[5];
else acc = accel[6];
input_regs(dev, regs);
switch (ati_remote_tbl[index].kind) {
case KIND_ACCEL:
input_event(dev, ati_remote_tbl[index].type,
ati_remote_tbl[index].code,
ati_remote_tbl[index].value * acc);
break;
case KIND_LU:
input_report_rel(dev, REL_X, -acc);
input_report_rel(dev, REL_Y, -acc);
break;
case KIND_RU:
input_report_rel(dev, REL_X, acc);
input_report_rel(dev, REL_Y, -acc);
break;
case KIND_LD:
input_report_rel(dev, REL_X, -acc);
input_report_rel(dev, REL_Y, acc);
break;
case KIND_RD:
input_report_rel(dev, REL_X, acc);
input_report_rel(dev, REL_Y, acc);
break;
default:
dev_dbg(&ati_remote->interface->dev, "ati_remote kind=%d\n",
ati_remote_tbl[index].kind);
}
input_sync(dev);
ati_remote->old_jiffies = jiffies;
ati_remote->old_data[0] = data[1];
ati_remote->old_data[1] = data[2];
}
/*
* ati_remote_irq_in
*/
static void ati_remote_irq_in(struct urb *urb, struct pt_regs *regs)
{
struct ati_remote *ati_remote = urb->context;
int retval;
switch (urb->status) {
case 0: /* success */
ati_remote_input_report(urb, regs);
break;
case -ECONNRESET: /* unlink */
case -ENOENT:
case -ESHUTDOWN:
dev_dbg(&ati_remote->interface->dev, "%s: urb error status, unlink? \n",
__FUNCTION__);
return;
default: /* error */
dev_dbg(&ati_remote->interface->dev, "%s: Nonzero urb status %d\n",
__FUNCTION__, urb->status);
}
retval = usb_submit_urb(urb, SLAB_ATOMIC);
if (retval)
dev_err(&ati_remote->interface->dev, "%s: usb_submit_urb()=%d\n",
__FUNCTION__, retval);
}
/*
* ati_remote_delete
*/
static void ati_remote_delete(struct ati_remote *ati_remote)
{
if (ati_remote->irq_urb)
usb_kill_urb(ati_remote->irq_urb);
if (ati_remote->out_urb)
usb_kill_urb(ati_remote->out_urb);
input_unregister_device(&ati_remote->idev);
if (ati_remote->inbuf)
usb_buffer_free(ati_remote->udev, DATA_BUFSIZE,
ati_remote->inbuf, ati_remote->inbuf_dma);
if (ati_remote->outbuf)
usb_buffer_free(ati_remote->udev, DATA_BUFSIZE,
ati_remote->outbuf, ati_remote->outbuf_dma);
if (ati_remote->irq_urb)
usb_free_urb(ati_remote->irq_urb);
if (ati_remote->out_urb)
usb_free_urb(ati_remote->out_urb);
kfree(ati_remote);
}
static void ati_remote_input_init(struct ati_remote *ati_remote)
{
struct input_dev *idev = &(ati_remote->idev);
int i;
idev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
idev->keybit[LONG(BTN_MOUSE)] = ( BIT(BTN_LEFT) | BIT(BTN_RIGHT) |
BIT(BTN_SIDE) | BIT(BTN_EXTRA) );
idev->relbit[0] = BIT(REL_X) | BIT(REL_Y);
for (i = 0; ati_remote_tbl[i].kind != KIND_END; i++)
if (ati_remote_tbl[i].type == EV_KEY)
set_bit(ati_remote_tbl[i].code, idev->keybit);
idev->private = ati_remote;
idev->open = ati_remote_open;
idev->close = ati_remote_close;
idev->name = ati_remote->name;
idev->phys = ati_remote->phys;
idev->id.bustype = BUS_USB;
idev->id.vendor = le16_to_cpu(ati_remote->udev->descriptor.idVendor);
idev->id.product = le16_to_cpu(ati_remote->udev->descriptor.idProduct);
idev->id.version = le16_to_cpu(ati_remote->udev->descriptor.bcdDevice);
idev->dev = &(ati_remote->udev->dev);
}
static int ati_remote_initialize(struct ati_remote *ati_remote)
{
struct usb_device *udev = ati_remote->udev;
int pipe, maxp;
init_waitqueue_head(&ati_remote->wait);
/* Set up irq_urb */
pipe = usb_rcvintpipe(udev, ati_remote->endpoint_in->bEndpointAddress);
maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
maxp = (maxp > DATA_BUFSIZE) ? DATA_BUFSIZE : maxp;
usb_fill_int_urb(ati_remote->irq_urb, udev, pipe, ati_remote->inbuf,
maxp, ati_remote_irq_in, ati_remote,
ati_remote->endpoint_in->bInterval);
ati_remote->irq_urb->transfer_dma = ati_remote->inbuf_dma;
ati_remote->irq_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
/* Set up out_urb */
pipe = usb_sndintpipe(udev, ati_remote->endpoint_out->bEndpointAddress);
maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
maxp = (maxp > DATA_BUFSIZE) ? DATA_BUFSIZE : maxp;
usb_fill_int_urb(ati_remote->out_urb, udev, pipe, ati_remote->outbuf,
maxp, ati_remote_irq_out, ati_remote,
ati_remote->endpoint_out->bInterval);
ati_remote->out_urb->transfer_dma = ati_remote->outbuf_dma;
ati_remote->out_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
/* send initialization strings */
if ((ati_remote_sendpacket(ati_remote, 0x8004, init1)) ||
(ati_remote_sendpacket(ati_remote, 0x8007, init2))) {
dev_err(&ati_remote->interface->dev,
"Initializing ati_remote hardware failed.\n");
return 1;
}
return 0;
}
/*
* ati_remote_probe
*/
static int ati_remote_probe(struct usb_interface *interface, const struct usb_device_id *id)
{
struct usb_device *udev = interface_to_usbdev(interface);
struct ati_remote *ati_remote = NULL;
struct usb_host_interface *iface_host;
int retval = -ENOMEM;
char path[64];
/* Allocate and clear an ati_remote struct */
if (!(ati_remote = kmalloc(sizeof (struct ati_remote), GFP_KERNEL)))
return -ENOMEM;
memset(ati_remote, 0x00, sizeof (struct ati_remote));
iface_host = interface->cur_altsetting;
if (iface_host->desc.bNumEndpoints != 2) {
err("%s: Unexpected desc.bNumEndpoints\n", __FUNCTION__);
retval = -ENODEV;
goto error;
}
ati_remote->endpoint_in = &(iface_host->endpoint[0].desc);
ati_remote->endpoint_out = &(iface_host->endpoint[1].desc);
ati_remote->udev = udev;
ati_remote->interface = interface;
if (!(ati_remote->endpoint_in->bEndpointAddress & 0x80)) {
err("%s: Unexpected endpoint_in->bEndpointAddress\n", __FUNCTION__);
retval = -ENODEV;
goto error;
}
if ((ati_remote->endpoint_in->bmAttributes & 3) != 3) {
err("%s: Unexpected endpoint_in->bmAttributes\n", __FUNCTION__);
retval = -ENODEV;
goto error;
}
if (le16_to_cpu(ati_remote->endpoint_in->wMaxPacketSize) == 0) {
err("%s: endpoint_in message size==0? \n", __FUNCTION__);
retval = -ENODEV;
goto error;
}
/* Allocate URB buffers, URBs */
ati_remote->inbuf = usb_buffer_alloc(udev, DATA_BUFSIZE, SLAB_ATOMIC,
&ati_remote->inbuf_dma);
if (!ati_remote->inbuf)
goto error;
ati_remote->outbuf = usb_buffer_alloc(udev, DATA_BUFSIZE, SLAB_ATOMIC,
&ati_remote->outbuf_dma);
if (!ati_remote->outbuf)
goto error;
ati_remote->irq_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!ati_remote->irq_urb)
goto error;
ati_remote->out_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!ati_remote->out_urb)
goto error;
usb_make_path(udev, path, NAME_BUFSIZE);
sprintf(ati_remote->phys, "%s/input%d", path, ATI_INPUTNUM);
if (udev->manufacturer)
strcat(ati_remote->name, udev->manufacturer);
if (udev->product)
sprintf(ati_remote->name, "%s %s", ati_remote->name, udev->product);
if (!strlen(ati_remote->name))
sprintf(ati_remote->name, DRIVER_DESC "(%04x,%04x)",
le16_to_cpu(ati_remote->udev->descriptor.idVendor),
le16_to_cpu(ati_remote->udev->descriptor.idProduct));
/* Device Hardware Initialization - fills in ati_remote->idev from udev. */
retval = ati_remote_initialize(ati_remote);
if (retval)
goto error;
/* Set up and register input device */
ati_remote_input_init(ati_remote);
input_register_device(&ati_remote->idev);
dev_info(&ati_remote->interface->dev, "Input registered: %s on %s\n",
ati_remote->name, path);
usb_set_intfdata(interface, ati_remote);
error:
if (retval)
ati_remote_delete(ati_remote);
return retval;
}
/*
* ati_remote_disconnect
*/
static void ati_remote_disconnect(struct usb_interface *interface)
{
struct ati_remote *ati_remote;
ati_remote = usb_get_intfdata(interface);
usb_set_intfdata(interface, NULL);
if (!ati_remote) {
warn("%s - null device?\n", __FUNCTION__);
return;
}
ati_remote_delete(ati_remote);
}
/*
* ati_remote_init
*/
static int __init ati_remote_init(void)
{
int result;
result = usb_register(&ati_remote_driver);
if (result)
err("usb_register error #%d\n", result);
else
info("Registered USB driver " DRIVER_DESC " v. " DRIVER_VERSION);
return result;
}
/*
* ati_remote_exit
*/
static void __exit ati_remote_exit(void)
{
usb_deregister(&ati_remote_driver);
}
/*
* module specification
*/
module_init(ati_remote_init);
module_exit(ati_remote_exit);
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
