/*
* copyright (C) 1999/2000 by Henning Zabel <henning@uni-paderborn.de>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software Foundation,
* Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
* USB-Kernel Driver for the Mustek MDC800 Digital Camera
* (c) 1999/2000 Henning Zabel <henning@uni-paderborn.de>
*
*
* The driver brings the USB functions of the MDC800 to Linux.
* To use the Camera you must support the USB Protocol of the camera
* to the Kernel Node.
* The Driver uses a misc device Node. Create it with :
* mknod /dev/mustek c 180 32
*
* The driver supports only one camera.
*
* Fix: mdc800 used sleep_on and slept with io_lock held.
* Converted sleep_on to waitqueues with schedule_timeout and made io_lock
* a semaphore from a spinlock.
* by Oliver Neukum <oliver@neukum.name>
* (02/12/2001)
*
* Identify version on module load.
* (08/04/2001) gb
*
* version 0.7.5
* Fixed potential SMP races with Spinlocks.
* Thanks to Oliver Neukum <oliver@neukum.name> who
* noticed the race conditions.
* (30/10/2000)
*
* Fixed: Setting urb->dev before submitting urb.
* by Greg KH <greg@kroah.com>
* (13/10/2000)
*
* version 0.7.3
* bugfix : The mdc800->state field gets set to READY after the
* the diconnect function sets it to NOT_CONNECTED. This makes the
* driver running like the camera is connected and causes some
* hang ups.
*
* version 0.7.1
* MOD_INC and MOD_DEC are changed in usb_probe to prevent load/unload
* problems when compiled as Module.
* (04/04/2000)
*
* The mdc800 driver gets assigned the USB Minor 32-47. The Registration
* was updated to use these values.
* (26/03/2000)
*
* The Init und Exit Module Function are updated.
* (01/03/2000)
*
* version 0.7.0
* Rewrite of the driver : The driver now uses URB's. The old stuff
* has been removed.
*
* version 0.6.0
* Rewrite of this driver: The Emulation of the rs232 protocoll
* has been removed from the driver. A special executeCommand function
* for this driver is included to gphoto.
* The driver supports two kind of communication to bulk endpoints.
* Either with the dev->bus->ops->bulk... or with callback function.
* (09/11/1999)
*
* version 0.5.0:
* first Version that gets a version number. Most of the needed
* functions work.
* (20/10/1999)
*/
#include <linux/sched.h>
#include <linux/signal.h>
#include <linux/spinlock.h>
#include <linux/errno.h>
#include <linux/random.h>
#include <linux/poll.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/smp_lock.h>
#include <linux/wait.h>
#include <linux/usb.h>
#include <linux/fs.h>
/*
* Version Information
*/
#define DRIVER_VERSION "v0.7.5 (30/10/2000)"
#define DRIVER_AUTHOR "Henning Zabel <henning@uni-paderborn.de>"
#define DRIVER_DESC "USB Driver for Mustek MDC800 Digital Camera"
/* Vendor and Product Information */
#define MDC800_VENDOR_ID 0x055f
#define MDC800_PRODUCT_ID 0xa800
/* Timeouts (msec) */
#define TO_DOWNLOAD_GET_READY 1500
#define TO_DOWNLOAD_GET_BUSY 1500
#define TO_WRITE_GET_READY 1000
#define TO_DEFAULT_COMMAND 5000
#define TO_READ_FROM_IRQ TO_DEFAULT_COMMAND
#define TO_GET_READY TO_DEFAULT_COMMAND
/* Minor Number of the device (create with mknod /dev/mustek c 180 32) */
#define MDC800_DEVICE_MINOR_BASE 32
/**************************************************************************
Data and structs
***************************************************************************/
typedef enum {
NOT_CONNECTED, READY, WORKING, DOWNLOAD
} mdc800_state;
/* Data for the driver */
struct mdc800_data
{
struct usb_device * dev; // Device Data
mdc800_state state;
unsigned int endpoint [4];
struct urb * irq_urb;
wait_queue_head_t irq_wait;
int irq_woken;
char* irq_urb_buffer;
int camera_busy; // is camera busy ?
int camera_request_ready; // Status to synchronize with irq
char camera_response [8]; // last Bytes send after busy
struct urb * write_urb;
char* write_urb_buffer;
wait_queue_head_t write_wait;
int written;
struct urb * download_urb;
char* download_urb_buffer;
wait_queue_head_t download_wait;
int downloaded;
int download_left; // Bytes left to download ?
/* Device Data */
char out [64]; // Answer Buffer
int out_ptr; // Index to the first not readen byte
int out_count; // Bytes in the buffer
int open; // Camera device open ?
struct semaphore io_lock; // IO -lock
char in [8]; // Command Input Buffer
int in_count;
int pic_index; // Cache for the Imagesize (-1 for nothing cached )
int pic_len;
int minor;
};
/* Specification of the Endpoints */
static struct usb_endpoint_descriptor mdc800_ed [4] =
{
{
.bLength = 0,
.bDescriptorType = 0,
.bEndpointAddress = 0x01,
.bmAttributes = 0x02,
.wMaxPacketSize = __constant_cpu_to_le16(8),
.bInterval = 0,
.bRefresh = 0,
.bSynchAddress = 0,
},
{
.bLength = 0,
.bDescriptorType = 0,
.bEndpointAddress = 0x82,
.bmAttributes = 0x03,
.wMaxPacketSize = __constant_cpu_to_le16(8),
.bInterval = 0,
.bRefresh = 0,
.bSynchAddress = 0,
},
{
.bLength = 0,
.bDescriptorType = 0,
.bEndpointAddress = 0x03,
.bmAttributes = 0x02,
.wMaxPacketSize = __constant_cpu_to_le16(64),
.bInterval = 0,
.bRefresh = 0,
.bSynchAddress = 0,
},
{
.bLength = 0,
.bDescriptorType = 0,
.bEndpointAddress = 0x84,
.bmAttributes = 0x02,
.wMaxPacketSize = __constant_cpu_to_le16(64),
.bInterval = 0,
.bRefresh = 0,
.bSynchAddress = 0,
},
};
/* The Variable used by the driver */
static struct mdc800_data* mdc800;
/***************************************************************************
The USB Part of the driver
****************************************************************************/
static int mdc800_endpoint_equals (struct usb_endpoint_descriptor *a,struct usb_endpoint_descriptor *b)
{
return (
( a->bEndpointAddress == b->bEndpointAddress )
&& ( a->bmAttributes == b->bmAttributes )
&& ( a->wMaxPacketSize == b->wMaxPacketSize )
);
}
/*
* Checks whether the camera responds busy
*/
static int mdc800_isBusy (char* ch)
{
int i=0;
while (i<8)
{
if (ch [i] != (char)0x99)
return 0;
i++;
}
return 1;
}
/*
* Checks whether the Camera is ready
*/
static int mdc800_isReady (char *ch)
{
int i=0;
while (i<8)
{
if (ch [i] != (char)0xbb)
return 0;
i++;
}
return 1;
}
/*
* USB IRQ Handler for InputLine
*/
static void mdc800_usb_irq (struct urb *urb, struct pt_regs *res)
{
int data_received=0, wake_up;
unsigned char* b=urb->transfer_buffer;
struct mdc800_data* mdc800=urb->context;
if (urb->status >= 0)
{
//dbg ("%i %i %i %i %i %i %i %i \n",b[0],b[1],b[2],b[3],b[4],b[5],b[6],b[7]);
if (mdc800_isBusy (b))
{
if (!mdc800->camera_busy)
{
mdc800->camera_busy=1;
dbg ("gets busy");
}
}
else
{
if (mdc800->camera_busy && mdc800_isReady (b))
{
mdc800->camera_busy=0;
dbg ("gets ready");
}
}
if (!(mdc800_isBusy (b) || mdc800_isReady (b)))
{
/* Store Data in camera_answer field */
dbg ("%i %i %i %i %i %i %i %i ",b[0],b[1],b[2],b[3],b[4],b[5],b[6],b[7]);
memcpy (mdc800->camera_response,b,8);
data_received=1;
}
}
wake_up= ( mdc800->camera_request_ready > 0 )
&&
(
((mdc800->camera_request_ready == 1) && (!mdc800->camera_busy))
||
((mdc800->camera_request_ready == 2) && data_received)
||
((mdc800->camera_request_ready == 3) && (mdc800->camera_busy))
||
(urb->status < 0)
);
if (wake_up)
{
mdc800->camera_request_ready=0;
mdc800->irq_woken=1;
wake_up (&mdc800->irq_wait);
}
}
/*
* Waits a while until the irq responds that camera is ready
*
* mode : 0: Wait for camera gets ready
* 1: Wait for receiving data
* 2: Wait for camera gets busy
*
* msec: Time to wait
*/
static int mdc800_usb_waitForIRQ (int mode, int msec)
{
mdc800->camera_request_ready=1+mode;
wait_event_timeout(mdc800->irq_wait, mdc800->irq_woken, msec*HZ/1000);
mdc800->irq_woken = 0;
if (mdc800->camera_request_ready>0)
{
mdc800->camera_request_ready=0;
err ("timeout waiting for camera.");
return -1;
}
if (mdc800->state == NOT_CONNECTED)
{
warn ("Camera gets disconnected during waiting for irq.");
mdc800->camera_request_ready=0;
return -2;
}
return 0;
}
/*
* The write_urb callback function
*/
static void mdc800_usb_write_notify (struct urb *urb, struct pt_regs *res)
{
struct mdc800_data* mdc800=urb->context;
if (urb->status != 0)
{
err ("writing command fails (status=%i)", urb->status);
}
else
{
mdc800->state=READY;
}
mdc800->written = 1;
wake_up (&mdc800->write_wait);
}
/*
* The download_urb callback function
*/
static void mdc800_usb_download_notify (struct urb *urb, struct pt_regs *res)
{
struct mdc800_data* mdc800=urb->context;
if (urb->status == 0)
{
/* Fill output buffer with these data */
memcpy (mdc800->out, urb->transfer_buffer, 64);
mdc800->out_count=64;
mdc800->out_ptr=0;
mdc800->download_left-=64;
if (mdc800->download_left == 0)
{
mdc800->state=READY;
}
}
else
{
err ("request bytes fails (status:%i)", urb->status);
}
mdc800->downloaded = 1;
wake_up (&mdc800->download_wait);
}
/***************************************************************************
Probing for the Camera
***************************************************************************/
static struct usb_driver mdc800_usb_driver;
static struct file_operations mdc800_device_ops;
static struct usb_class_driver mdc800_class = {
.name = "usb/mdc800%d",
.fops = &mdc800_device_ops,
.mode = S_IFCHR | S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP,
.minor_base = MDC800_DEVICE_MINOR_BASE,
};
/*
* Callback to search the Mustek MDC800 on the USB Bus
*/
static int mdc800_usb_probe (struct usb_interface *intf,
const struct usb_device_id *id)
{
int i,j;
struct usb_host_interface *intf_desc;
struct usb_device *dev = interface_to_usbdev (intf);
int irq_interval=0;
int retval;
dbg ("(mdc800_usb_probe) called.");
if (mdc800->dev != NULL)
{
warn ("only one Mustek MDC800 is supported.");
return -ENODEV;
}
if (dev->descriptor.bNumConfigurations != 1)
{
err ("probe fails -> wrong Number of Configuration");
return -ENODEV;
}
intf_desc = intf->cur_altsetting;
if (
( intf_desc->desc.bInterfaceClass != 0xff )
|| ( intf_desc->desc.bInterfaceSubClass != 0 )
|| ( intf_desc->desc.bInterfaceProtocol != 0 )
|| ( intf_desc->desc.bNumEndpoints != 4)
)
{
err ("probe fails -> wrong Interface");
return -ENODEV;
}
/* Check the Endpoints */
for (i=0; i<4; i++)
{
mdc800->endpoint[i]=-1;
for (j=0; j<4; j++)
{
if (mdc800_endpoint_equals (&intf_desc->endpoint [j].desc,&mdc800_ed [i]))
{
mdc800->endpoint[i]=intf_desc->endpoint [j].desc.bEndpointAddress ;
if (i==1)
{
irq_interval=intf_desc->endpoint [j].desc.bInterval;
}
continue;
}
}
if (mdc800->endpoint[i] == -1)
{
err ("probe fails -> Wrong Endpoints.");
return -ENODEV;
}
}
info ("Found Mustek MDC800 on USB.");
down (&mdc800->io_lock);
retval = usb_register_dev(intf, &mdc800_class);
if (retval) {
err ("Not able to get a minor for this device.");
return -ENODEV;
}
mdc800->dev=dev;
mdc800->open=0;
/* Setup URB Structs */
usb_fill_int_urb (
mdc800->irq_urb,
mdc800->dev,
usb_rcvintpipe (mdc800->dev,mdc800->endpoint [1]),
mdc800->irq_urb_buffer,
8,
mdc800_usb_irq,
mdc800,
irq_interval
);
usb_fill_bulk_urb (
mdc800->write_urb,
mdc800->dev,
usb_sndbulkpipe (mdc800->dev, mdc800->endpoint[0]),
mdc800->write_urb_buffer,
8,
mdc800_usb_write_notify,
mdc800
);
usb_fill_bulk_urb (
mdc800->download_urb,
mdc800->dev,
usb_rcvbulkpipe (mdc800->dev, mdc800->endpoint [3]),
mdc800->download_urb_buffer,
64,
mdc800_usb_download_notify,
mdc800
);
mdc800->state=READY;
up (&mdc800->io_lock);
usb_set_intfdata(intf, mdc800);
return 0;
}
/*
* Disconnect USB device (maybe the MDC800)
*/
static void mdc800_usb_disconnect (struct usb_interface *intf)
{
struct mdc800_data* mdc800 = usb_get_intfdata(intf);
dbg ("(mdc800_usb_disconnect) called");
if (mdc800) {
if (mdc800->state == NOT_CONNECTED)
return;
usb_deregister_dev(intf, &mdc800_class);
mdc800->state=NOT_CONNECTED;
usb_kill_urb(mdc800->irq_urb);
usb_kill_urb(mdc800->write_urb);
usb_kill_urb(mdc800->download_urb);
mdc800->dev = NULL;
usb_set_intfdata(intf, NULL);
}
info ("Mustek MDC800 disconnected from USB.");
}
/***************************************************************************
The Misc device Part (file_operations)
****************************************************************************/
/*
* This Function calc the Answersize for a command.
*/
static int mdc800_getAnswerSize (char command)
{
switch ((unsigned char) command)
{
case 0x2a:
case 0x49:
case 0x51:
case 0x0d:
case 0x20:
case 0x07:
case 0x01:
case 0x25:
case 0x00:
return 8;
case 0x05:
case 0x3e:
return mdc800->pic_len;
case 0x09:
return 4096;
default:
return 0;
}
}
/*
* Init the device: (1) alloc mem (2) Increase MOD Count ..
*/
static int mdc800_device_open (struct inode* inode, struct file *file)
{
int retval=0;
int errn=0;
down (&mdc800->io_lock);
if (mdc800->state == NOT_CONNECTED)
{
errn=-EBUSY;
goto error_out;
}
if (mdc800->open)
{
errn=-EBUSY;
goto error_out;
}
mdc800->in_count=0;
mdc800->out_count=0;
mdc800->out_ptr=0;
mdc800->pic_index=0;
mdc800->pic_len=-1;
mdc800->download_left=0;
mdc800->camera_busy=0;
mdc800->camera_request_ready=0;
retval=0;
mdc800->irq_urb->dev = mdc800->dev;
if (usb_submit_urb (mdc800->irq_urb, GFP_KERNEL))
{
err ("request USB irq fails (submit_retval=%i urb_status=%i).",retval, mdc800->irq_urb->status);
errn = -EIO;
goto error_out;
}
mdc800->open=1;
dbg ("Mustek MDC800 device opened.");
error_out:
up (&mdc800->io_lock);
return errn;
}
/*
* Close the Camera and release Memory
*/
static int mdc800_device_release (struct inode* inode, struct file *file)
{
int retval=0;
dbg ("Mustek MDC800 device closed.");
down (&mdc800->io_lock);
if (mdc800->open && (mdc800->state != NOT_CONNECTED))
{
usb_kill_urb(mdc800->irq_urb);
usb_kill_urb(mdc800->write_urb);
usb_kill_urb(mdc800->download_urb);
mdc800->open=0;
}
else
{
retval=-EIO;
}
up(&mdc800->io_lock);
return retval;
}
/*
* The Device read callback Function
*/
static ssize_t mdc800_device_read (struct file *file, char __user *buf, size_t len, loff_t *pos)
{
size_t left=len, sts=len; /* single transfer size */
char __user *ptr = buf;
down (&mdc800->io_lock);
if (mdc800->state == NOT_CONNECTED)
{
up (&mdc800->io_lock);
return -EBUSY;
}
if (mdc800->state == WORKING)
{
warn ("Illegal State \"working\" reached during read ?!");
up (&mdc800->io_lock);
return -EBUSY;
}
if (!mdc800->open)
{
up (&mdc800->io_lock);
return -EBUSY;
}
while (left)
{
if (signal_pending (current))
{
up (&mdc800->io_lock);
return -EINTR;
}
sts=left > (mdc800->out_count-mdc800->out_ptr)?mdc800->out_count-mdc800->out_ptr:left;
if (sts <= 0)
{
/* Too less Data in buffer */
if (mdc800->state == DOWNLOAD)
{
mdc800->out_count=0;
mdc800->out_ptr=0;
/* Download -> Request new bytes */
mdc800->download_urb->dev = mdc800->dev;
if (usb_submit_urb (mdc800->download_urb, GFP_KERNEL))
{
err ("Can't submit download urb (status=%i)",mdc800->download_urb->status);
up (&mdc800->io_lock);
return len-left;
}
wait_event_timeout(mdc800->download_wait, mdc800->downloaded,
TO_DOWNLOAD_GET_READY*HZ/1000);
mdc800->downloaded = 0;
if (mdc800->download_urb->status != 0)
{
err ("request download-bytes fails (status=%i)",mdc800->download_urb->status);
up (&mdc800->io_lock);
return len-left;
}
}
else
{
/* No more bytes -> that's an error*/
up (&mdc800->io_lock);
return -EIO;
}
}
else
{
/* Copy Bytes */
if (copy_to_user(ptr, &mdc800->out [mdc800->out_ptr],
sts)) {
up(&mdc800->io_lock);
return -EFAULT;
}
ptr+=sts;
left-=sts;
mdc800->out_ptr+=sts;
}
}
up (&mdc800->io_lock);
return len-left;
}
/*
* The Device write callback Function
* If a 8Byte Command is received, it will be send to the camera.
* After this the driver initiates the request for the answer or
* just waits until the camera becomes ready.
*/
static ssize_t mdc800_device_write (struct file *file, const char __user *buf, size_t len, loff_t *pos)
{
size_t i=0;
down (&mdc800->io_lock);
if (mdc800->state != READY)
{
up (&mdc800->io_lock);
return -EBUSY;
}
if (!mdc800->open )
{
up (&mdc800->io_lock);
return -EBUSY;
}
while (i<len)
{
unsigned char c;
if (signal_pending (current))
{
up (&mdc800->io_lock);
return -EINTR;
}
if(get_user(c, buf+i))
{
up(&mdc800->io_lock);
return -EFAULT;
}
/* check for command start */
if (c == 0x55)
{
mdc800->in_count=0;
mdc800->out_count=0;
mdc800->out_ptr=0;
mdc800->download_left=0;
}
/* save command byte */
if (mdc800->in_count < 8)
{
mdc800->in[mdc800->in_count] = c;
mdc800->in_count++;
}
else
{
up (&mdc800->io_lock);
return -EIO;
}
/* Command Buffer full ? -> send it to camera */
if (mdc800->in_count == 8)
{
int answersize;
if (mdc800_usb_waitForIRQ (0,TO_GET_READY))
{
err ("Camera didn't get ready.\n");
up (&mdc800->io_lock);
return -EIO;
}
answersize=mdc800_getAnswerSize (mdc800->in[1]);
mdc800->state=WORKING;
memcpy (mdc800->write_urb->transfer_buffer, mdc800->in,8);
mdc800->write_urb->dev = mdc800->dev;
if (usb_submit_urb (mdc800->write_urb, GFP_KERNEL))
{
err ("submitting write urb fails (status=%i)", mdc800->write_urb->status);
up (&mdc800->io_lock);
return -EIO;
}
wait_event_timeout(mdc800->write_wait, mdc800->written, TO_WRITE_GET_READY*HZ/1000);
mdc800->written = 0;
if (mdc800->state == WORKING)
{
usb_kill_urb(mdc800->write_urb);
up (&mdc800->io_lock);
return -EIO;
}
switch ((unsigned char) mdc800->in[1])
{
case 0x05: /* Download Image */
case 0x3e: /* Take shot in Fine Mode (WCam Mode) */
if (mdc800->pic_len < 0)
{
err ("call 0x07 before 0x05,0x3e");
mdc800->state=READY;
up (&mdc800->io_lock);
return -EIO;
}
mdc800->pic_len=-1;
case 0x09: /* Download Thumbnail */
mdc800->download_left=answersize+64;
mdc800->state=DOWNLOAD;
mdc800_usb_waitForIRQ (0,TO_DOWNLOAD_GET_BUSY);
break;
default:
if (answersize)
{
if (mdc800_usb_waitForIRQ (1,TO_READ_FROM_IRQ))
{
err ("requesting answer from irq fails");
up (&mdc800->io_lock);
return -EIO;
}
/* Write dummy data, (this is ugly but part of the USB Protocol */
/* if you use endpoint 1 as bulk and not as irq) */
memcpy (mdc800->out, mdc800->camera_response,8);
/* This is the interpreted answer */
memcpy (&mdc800->out[8], mdc800->camera_response,8);
mdc800->out_ptr=0;
mdc800->out_count=16;
/* Cache the Imagesize, if command was getImageSize */
if (mdc800->in [1] == (char) 0x07)
{
mdc800->pic_len=(int) 65536*(unsigned char) mdc800->camera_response[0]+256*(unsigned char) mdc800->camera_response[1]+(unsigned char) mdc800->camera_response[2];
dbg ("cached imagesize = %i",mdc800->pic_len);
}
}
else
{
if (mdc800_usb_waitForIRQ (0,TO_DEFAULT_COMMAND))
{
err ("Command Timeout.");
up (&mdc800->io_lock);
return -EIO;
}
}
mdc800->state=READY;
break;
}
}
i++;
}
up (&mdc800->io_lock);
return i;
}
/***************************************************************************
Init and Cleanup this driver (Structs and types)
****************************************************************************/
/* File Operations of this drivers */
static struct file_operations mdc800_device_ops =
{
.owner = THIS_MODULE,
.read = mdc800_device_read,
.write = mdc800_device_write,
.open = mdc800_device_open,
.release = mdc800_device_release,
};
static struct usb_device_id mdc800_table [] = {
{ USB_DEVICE(MDC800_VENDOR_ID, MDC800_PRODUCT_ID) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE (usb, mdc800_table);
/*
* USB Driver Struct for this device
*/
static struct usb_driver mdc800_usb_driver =
{
.owner = THIS_MODULE,
.name = "mdc800",
.probe = mdc800_usb_probe,
.disconnect = mdc800_usb_disconnect,
.id_table = mdc800_table
};
/************************************************************************
Init and Cleanup this driver (Main Functions)
*************************************************************************/
#define try(A) if (!(A)) goto cleanup_on_fail;
static int __init usb_mdc800_init (void)
{
int retval = -ENODEV;
/* Allocate Memory */
try (mdc800=kmalloc (sizeof (struct mdc800_data), GFP_KERNEL));
memset(mdc800, 0, sizeof(struct mdc800_data));
mdc800->dev = NULL;
mdc800->open=0;
mdc800->state=NOT_CONNECTED;
init_MUTEX (&mdc800->io_lock);
init_waitqueue_head (&mdc800->irq_wait);
init_waitqueue_head (&mdc800->write_wait);
init_waitqueue_head (&mdc800->download_wait);
mdc800->irq_woken = 0;
mdc800->downloaded = 0;
mdc800->written = 0;
try (mdc800->irq_urb_buffer=kmalloc (8, GFP_KERNEL));
try (mdc800->write_urb_buffer=kmalloc (8, GFP_KERNEL));
try (mdc800->download_urb_buffer=kmalloc (64, GFP_KERNEL));
try (mdc800->irq_urb=usb_alloc_urb (0, GFP_KERNEL));
try (mdc800->download_urb=usb_alloc_urb (0, GFP_KERNEL));
try (mdc800->write_urb=usb_alloc_urb (0, GFP_KERNEL));
/* Register the driver */
retval = usb_register(&mdc800_usb_driver);
if (retval)
goto cleanup_on_fail;
info (DRIVER_VERSION ":" DRIVER_DESC);
return 0;
/* Clean driver up, when something fails */
cleanup_on_fail:
if (mdc800 != NULL)
{
err ("can't alloc memory!");
kfree(mdc800->download_urb_buffer);
kfree(mdc800->write_urb_buffer);
kfree(mdc800->irq_urb_buffer);
usb_free_urb(mdc800->write_urb);
usb_free_urb(mdc800->download_urb);
usb_free_urb(mdc800->irq_urb);
kfree (mdc800);
}
mdc800 = NULL;
return retval;
}
static void __exit usb_mdc800_cleanup (void)
{
usb_deregister (&mdc800_usb_driver);
usb_free_urb (mdc800->irq_urb);
usb_free_urb (mdc800->download_urb);
usb_free_urb (mdc800->write_urb);
kfree (mdc800->irq_urb_buffer);
kfree (mdc800->write_urb_buffer);
kfree (mdc800->download_urb_buffer);
kfree (mdc800);
mdc800 = NULL;
}
module_init (usb_mdc800_init);
module_exit (usb_mdc800_cleanup);
MODULE_AUTHOR( DRIVER_AUTHOR );
MODULE_DESCRIPTION( DRIVER_DESC );
MODULE_LICENSE("GPL");
