/*
* OHCI HCD (Host Controller Driver) for USB.
*
* (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
* (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
* (C) Copyright 2002 Hewlett-Packard Company
*
* Bus Glue for pxa27x
*
* Written by Christopher Hoover <ch@hpl.hp.com>
* Based on fragments of previous driver by Russell King et al.
*
* Modified for LH7A404 from ohci-sa1111.c
* by Durgesh Pattamatta <pattamattad@sharpsec.com>
*
* Modified for pxa27x from ohci-lh7a404.c
* by Nick Bane <nick@cecomputing.co.uk> 26-8-2004
*
* This file is licenced under the GPL.
*/
#include <linux/device.h>
#include <asm/mach-types.h>
#include <asm/hardware.h>
#include <asm/arch/pxa-regs.h>
#define PMM_NPS_MODE 1
#define PMM_GLOBAL_MODE 2
#define PMM_PERPORT_MODE 3
#define PXA_UHC_MAX_PORTNUM 3
#define UHCRHPS(x) __REG2( 0x4C000050, (x)<<2 )
static int pxa27x_ohci_pmm_state;
/*
PMM_NPS_MODE -- PMM Non-power switching mode
Ports are powered continuously.
PMM_GLOBAL_MODE -- PMM global switching mode
All ports are powered at the same time.
PMM_PERPORT_MODE -- PMM per port switching mode
Ports are powered individually.
*/
static int pxa27x_ohci_select_pmm( int mode )
{
pxa27x_ohci_pmm_state = mode;
switch ( mode ) {
case PMM_NPS_MODE:
UHCRHDA |= RH_A_NPS;
break;
case PMM_GLOBAL_MODE:
UHCRHDA &= ~(RH_A_NPS & RH_A_PSM);
break;
case PMM_PERPORT_MODE:
UHCRHDA &= ~(RH_A_NPS);
UHCRHDA |= RH_A_PSM;
/* Set port power control mask bits, only 3 ports. */
UHCRHDB |= (0x7<<17);
break;
default:
printk( KERN_ERR
"Invalid mode %d, set to non-power switch mode.\n",
mode );
pxa27x_ohci_pmm_state = PMM_NPS_MODE;
UHCRHDA |= RH_A_NPS;
}
return 0;
}
extern int usb_disabled(void);
/*-------------------------------------------------------------------------*/
static void pxa27x_start_hc(struct platform_device *dev)
{
pxa_set_cken(CKEN10_USBHOST, 1);
UHCHR |= UHCHR_FHR;
udelay(11);
UHCHR &= ~UHCHR_FHR;
UHCHR |= UHCHR_FSBIR;
while (UHCHR & UHCHR_FSBIR)
cpu_relax();
/* This could be properly abstracted away through the
device data the day more machines are supported and
their differences can be figured out correctly. */
if (machine_is_mainstone()) {
/* setup Port1 GPIO pin. */
pxa_gpio_mode( 88 | GPIO_ALT_FN_1_IN); /* USBHPWR1 */
pxa_gpio_mode( 89 | GPIO_ALT_FN_2_OUT); /* USBHPEN1 */
/* Set the Power Control Polarity Low and Power Sense
Polarity Low to active low. Supply power to USB ports. */
UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE);
pxa27x_ohci_pmm_state = PMM_PERPORT_MODE;
}
UHCHR &= ~UHCHR_SSE;
UHCHIE = (UHCHIE_UPRIE | UHCHIE_RWIE);
/* Clear any OTG Pin Hold */
if (PSSR & PSSR_OTGPH)
PSSR |= PSSR_OTGPH;
}
static void pxa27x_stop_hc(struct platform_device *dev)
{
UHCHR |= UHCHR_FHR;
udelay(11);
UHCHR &= ~UHCHR_FHR;
UHCCOMS |= 1;
udelay(10);
pxa_set_cken(CKEN10_USBHOST, 0);
}
/*-------------------------------------------------------------------------*/
/* configure so an HC device and id are always provided */
/* always called with process context; sleeping is OK */
/**
* usb_hcd_pxa27x_probe - initialize pxa27x-based HCDs
* Context: !in_interrupt()
*
* Allocates basic resources for this USB host controller, and
* then invokes the start() method for the HCD associated with it
* through the hotplug entry's driver_data.
*
*/
int usb_hcd_pxa27x_probe (const struct hc_driver *driver,
struct platform_device *dev)
{
int retval;
struct usb_hcd *hcd;
if (dev->resource[1].flags != IORESOURCE_IRQ) {
pr_debug ("resource[1] is not IORESOURCE_IRQ");
return -ENOMEM;
}
hcd = usb_create_hcd (driver, &dev->dev, "pxa27x");
if (!hcd)
return -ENOMEM;
hcd->rsrc_start = dev->resource[0].start;
hcd->rsrc_len = dev->resource[0].end - dev->resource[0].start + 1;
if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
pr_debug("request_mem_region failed");
retval = -EBUSY;
goto err1;
}
hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
if (!hcd->regs) {
pr_debug("ioremap failed");
retval = -ENOMEM;
goto err2;
}
pxa27x_start_hc(dev);
/* Select Power Management Mode */
pxa27x_ohci_select_pmm(pxa27x_ohci_pmm_state);
ohci_hcd_init(hcd_to_ohci(hcd));
retval = usb_add_hcd(hcd, dev->resource[1].start, SA_INTERRUPT);
if (retval == 0)
return retval;
pxa27x_stop_hc(dev);
iounmap(hcd->regs);
err2:
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
err1:
usb_put_hcd(hcd);
return retval;
}
/* may be called without controller electrically present */
/* may be called with controller, bus, and devices active */
/**
* usb_hcd_pxa27x_remove - shutdown processing for pxa27x-based HCDs
* @dev: USB Host Controller being removed
* Context: !in_interrupt()
*
* Reverses the effect of usb_hcd_pxa27x_probe(), first invoking
* the HCD's stop() method. It is always called from a thread
* context, normally "rmmod", "apmd", or something similar.
*
*/
void usb_hcd_pxa27x_remove (struct usb_hcd *hcd, struct platform_device *dev)
{
usb_remove_hcd(hcd);
pxa27x_stop_hc(dev);
iounmap(hcd->regs);
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
usb_put_hcd(hcd);
}
/*-------------------------------------------------------------------------*/
static int __devinit
ohci_pxa27x_start (struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
int ret;
ohci_dbg (ohci, "ohci_pxa27x_start, ohci:%p", ohci);
/* The value of NDP in roothub_a is incorrect on this hardware */
ohci->num_ports = 3;
if ((ret = ohci_init(ohci)) < 0)
return ret;
if ((ret = ohci_run (ohci)) < 0) {
err ("can't start %s", hcd->self.bus_name);
ohci_stop (hcd);
return ret;
}
return 0;
}
/*-------------------------------------------------------------------------*/
static const struct hc_driver ohci_pxa27x_hc_driver = {
.description = hcd_name,
.product_desc = "PXA27x OHCI",
.hcd_priv_size = sizeof(struct ohci_hcd),
/*
* generic hardware linkage
*/
.irq = ohci_irq,
.flags = HCD_USB11 | HCD_MEMORY,
/*
* basic lifecycle operations
*/
.start = ohci_pxa27x_start,
.stop = ohci_stop,
/*
* managing i/o requests and associated device resources
*/
.urb_enqueue = ohci_urb_enqueue,
.urb_dequeue = ohci_urb_dequeue,
.endpoint_disable = ohci_endpoint_disable,
/*
* scheduling support
*/
.get_frame_number = ohci_get_frame,
/*
* root hub support
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
#ifdef CONFIG_USB_SUSPEND
.hub_suspend = ohci_hub_suspend,
.hub_resume = ohci_hub_resume,
#endif
};
/*-------------------------------------------------------------------------*/
static int ohci_hcd_pxa27x_drv_probe(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
int ret;
pr_debug ("In ohci_hcd_pxa27x_drv_probe");
if (usb_disabled())
return -ENODEV;
ret = usb_hcd_pxa27x_probe(&ohci_pxa27x_hc_driver, pdev);
return ret;
}
static int ohci_hcd_pxa27x_drv_remove(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct usb_hcd *hcd = dev_get_drvdata(dev);
usb_hcd_pxa27x_remove(hcd, pdev);
return 0;
}
static int ohci_hcd_pxa27x_drv_suspend(struct device *dev, pm_message_t state, u32 level)
{
// struct platform_device *pdev = to_platform_device(dev);
// struct usb_hcd *hcd = dev_get_drvdata(dev);
printk("%s: not implemented yet\n", __FUNCTION__);
return 0;
}
static int ohci_hcd_pxa27x_drv_resume(struct device *dev, u32 level)
{
// struct platform_device *pdev = to_platform_device(dev);
// struct usb_hcd *hcd = dev_get_drvdata(dev);
printk("%s: not implemented yet\n", __FUNCTION__);
return 0;
}
static struct device_driver ohci_hcd_pxa27x_driver = {
.name = "pxa27x-ohci",
.bus = &platform_bus_type,
.probe = ohci_hcd_pxa27x_drv_probe,
.remove = ohci_hcd_pxa27x_drv_remove,
.suspend = ohci_hcd_pxa27x_drv_suspend,
.resume = ohci_hcd_pxa27x_drv_resume,
};
static int __init ohci_hcd_pxa27x_init (void)
{
pr_debug (DRIVER_INFO " (pxa27x)");
pr_debug ("block sizes: ed %d td %d\n",
sizeof (struct ed), sizeof (struct td));
return driver_register(&ohci_hcd_pxa27x_driver);
}
static void __exit ohci_hcd_pxa27x_cleanup (void)
{
driver_unregister(&ohci_hcd_pxa27x_driver);
}
module_init (ohci_hcd_pxa27x_init);
module_exit (ohci_hcd_pxa27x_cleanup);
