/*
* linux/drivers/usb/gadget/pxa2xx_udc.h
* Intel PXA2xx on-chip full speed USB device controller
*
* Copyright (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
* Copyright (C) 2003 David Brownell
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __LINUX_USB_GADGET_PXA2XX_H
#define __LINUX_USB_GADGET_PXA2XX_H
#include <linux/types.h>
/*-------------------------------------------------------------------------*/
/* pxa2xx has this (move to include/asm-arm/arch-pxa/pxa-regs.h) */
#define UFNRH_SIR (1 << 7) /* SOF interrupt request */
#define UFNRH_SIM (1 << 6) /* SOF interrupt mask */
#define UFNRH_IPE14 (1 << 5) /* ISO packet error, ep14 */
#define UFNRH_IPE9 (1 << 4) /* ISO packet error, ep9 */
#define UFNRH_IPE4 (1 << 3) /* ISO packet error, ep4 */
/* pxa255 has this (move to include/asm-arm/arch-pxa/pxa-regs.h) */
#define UDCCFR UDC_RES2 /* UDC Control Function Register */
#define UDCCFR_AREN (1 << 7) /* ACK response enable (now) */
#define UDCCFR_ACM (1 << 2) /* ACK control mode (wait for AREN) */
/* latest pxa255 errata define new "must be one" bits in UDCCFR */
#define UDCCFR_MB1 (0xff & ~(UDCCFR_AREN|UDCCFR_ACM))
/*-------------------------------------------------------------------------*/
struct pxa2xx_udc;
struct pxa2xx_ep {
struct usb_ep ep;
struct pxa2xx_udc *dev;
const struct usb_endpoint_descriptor *desc;
struct list_head queue;
unsigned long pio_irqs;
unsigned long dma_irqs;
short dma;
unsigned short fifo_size;
u8 bEndpointAddress;
u8 bmAttributes;
unsigned stopped : 1;
unsigned dma_fixup : 1;
/* UDCCS = UDC Control/Status for this EP
* UBCR = UDC Byte Count Remaining (contents of OUT fifo)
* UDDR = UDC Endpoint Data Register (the fifo)
* DRCM = DMA Request Channel Map
*/
volatile unsigned long *reg_udccs;
volatile unsigned long *reg_ubcr;
volatile unsigned long *reg_uddr;
#ifdef USE_DMA
volatile unsigned long *reg_drcmr;
#define drcmr(n) .reg_drcmr = & DRCMR ## n ,
#else
#define drcmr(n)
#endif
};
struct pxa2xx_request {
struct usb_request req;
struct list_head queue;
};
enum ep0_state {
EP0_IDLE,
EP0_IN_DATA_PHASE,
EP0_OUT_DATA_PHASE,
EP0_END_XFER,
EP0_STALL,
};
#define EP0_FIFO_SIZE ((unsigned)16)
#define BULK_FIFO_SIZE ((unsigned)64)
#define ISO_FIFO_SIZE ((unsigned)256)
#define INT_FIFO_SIZE ((unsigned)8)
struct udc_stats {
struct ep0stats {
unsigned long ops;
unsigned long bytes;
} read, write;
unsigned long irqs;
};
#ifdef CONFIG_USB_PXA2XX_SMALL
/* when memory's tight, SMALL config saves code+data. */
#undef USE_DMA
#define PXA_UDC_NUM_ENDPOINTS 3
#endif
#ifndef PXA_UDC_NUM_ENDPOINTS
#define PXA_UDC_NUM_ENDPOINTS 16
#endif
struct pxa2xx_udc {
struct usb_gadget gadget;
struct usb_gadget_driver *driver;
enum ep0_state ep0state;
struct udc_stats stats;
unsigned got_irq : 1,
vbus : 1,
pullup : 1,
has_cfr : 1,
req_pending : 1,
req_std : 1,
req_config : 1;
#define start_watchdog(dev) mod_timer(&dev->timer, jiffies + (HZ/200))
struct timer_list timer;
struct device *dev;
struct pxa2xx_udc_mach_info *mach;
u64 dma_mask;
struct pxa2xx_ep ep [PXA_UDC_NUM_ENDPOINTS];
};
/*-------------------------------------------------------------------------*/
#ifdef CONFIG_ARCH_LUBBOCK
#include <asm/arch/lubbock.h>
/* lubbock can also report usb connect/disconnect irqs */
#ifdef DEBUG
#define HEX_DISPLAY(n) if (machine_is_lubbock()) { LUB_HEXLED = (n); }
#endif
#endif
/*-------------------------------------------------------------------------*/
/* LEDs are only for debug */
#ifndef HEX_DISPLAY
#define HEX_DISPLAY(n) do {} while(0)
#endif
#ifdef DEBUG
#include <asm/leds.h>
#define LED_CONNECTED_ON leds_event(led_green_on)
#define LED_CONNECTED_OFF do { \
leds_event(led_green_off); \
HEX_DISPLAY(0); \
} while(0)
#endif
#ifndef LED_CONNECTED_ON
#define LED_CONNECTED_ON do {} while(0)
#define LED_CONNECTED_OFF do {} while(0)
#endif
/*-------------------------------------------------------------------------*/
static struct pxa2xx_udc *the_controller;
/* one GPIO should be used to detect VBUS from the host */
static inline int is_vbus_present(void)
{
if (!the_controller->mach->udc_is_connected)
return 1;
return the_controller->mach->udc_is_connected();
}
/* one GPIO should control a D+ pullup, so host sees this device (or not) */
static inline void pullup_off(void)
{
if (!the_controller->mach->udc_command)
return;
the_controller->mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT);
}
static inline void pullup_on(void)
{
if (!the_controller->mach->udc_command)
return;
the_controller->mach->udc_command(PXA2XX_UDC_CMD_CONNECT);
}
/*-------------------------------------------------------------------------*/
/*
* Debugging support vanishes in non-debug builds. DBG_NORMAL should be
* mostly silent during normal use/testing, with no timing side-effects.
*/
#define DBG_NORMAL 1 /* error paths, device state transitions */
#define DBG_VERBOSE 2 /* add some success path trace info */
#define DBG_NOISY 3 /* ... even more: request level */
#define DBG_VERY_NOISY 4 /* ... even more: packet level */
#ifdef DEBUG
static const char *state_name[] = {
"EP0_IDLE",
"EP0_IN_DATA_PHASE", "EP0_OUT_DATA_PHASE",
"EP0_END_XFER", "EP0_STALL"
};
#define DMSG(stuff...) printk(KERN_DEBUG "udc: " stuff)
#ifdef VERBOSE
# define UDC_DEBUG DBG_VERBOSE
#else
# define UDC_DEBUG DBG_NORMAL
#endif
static void __attribute__ ((__unused__))
dump_udccr(const char *label)
{
u32 udccr = UDCCR;
DMSG("%s %02X =%s%s%s%s%s%s%s%s\n",
label, udccr,
(udccr & UDCCR_REM) ? " rem" : "",
(udccr & UDCCR_RSTIR) ? " rstir" : "",
(udccr & UDCCR_SRM) ? " srm" : "",
(udccr & UDCCR_SUSIR) ? " susir" : "",
(udccr & UDCCR_RESIR) ? " resir" : "",
(udccr & UDCCR_RSM) ? " rsm" : "",
(udccr & UDCCR_UDA) ? " uda" : "",
(udccr & UDCCR_UDE) ? " ude" : "");
}
static void __attribute__ ((__unused__))
dump_udccs0(const char *label)
{
u32 udccs0 = UDCCS0;
DMSG("%s %s %02X =%s%s%s%s%s%s%s%s\n",
label, state_name[the_controller->ep0state], udccs0,
(udccs0 & UDCCS0_SA) ? " sa" : "",
(udccs0 & UDCCS0_RNE) ? " rne" : "",
(udccs0 & UDCCS0_FST) ? " fst" : "",
(udccs0 & UDCCS0_SST) ? " sst" : "",
(udccs0 & UDCCS0_DRWF) ? " dwrf" : "",
(udccs0 & UDCCS0_FTF) ? " ftf" : "",
(udccs0 & UDCCS0_IPR) ? " ipr" : "",
(udccs0 & UDCCS0_OPR) ? " opr" : "");
}
static void __attribute__ ((__unused__))
dump_state(struct pxa2xx_udc *dev)
{
u32 tmp;
unsigned i;
DMSG("%s %s, uicr %02X.%02X, usir %02X.%02x, ufnr %02X.%02X\n",
is_usb_connected() ? "host " : "disconnected",
state_name[dev->ep0state],
UICR1, UICR0, USIR1, USIR0, UFNRH, UFNRL);
dump_udccr("udccr");
if (dev->has_cfr) {
tmp = UDCCFR;
DMSG("udccfr %02X =%s%s\n", tmp,
(tmp & UDCCFR_AREN) ? " aren" : "",
(tmp & UDCCFR_ACM) ? " acm" : "");
}
if (!dev->driver) {
DMSG("no gadget driver bound\n");
return;
} else
DMSG("ep0 driver '%s'\n", dev->driver->driver.name);
if (!is_usb_connected())
return;
dump_udccs0 ("udccs0");
DMSG("ep0 IN %lu/%lu, OUT %lu/%lu\n",
dev->stats.write.bytes, dev->stats.write.ops,
dev->stats.read.bytes, dev->stats.read.ops);
for (i = 1; i < PXA_UDC_NUM_ENDPOINTS; i++) {
if (dev->ep [i].desc == 0)
continue;
DMSG ("udccs%d = %02x\n", i, *dev->ep->reg_udccs);
}
}
#else
#define DMSG(stuff...) do{}while(0)
#define dump_udccr(x) do{}while(0)
#define dump_udccs0(x) do{}while(0)
#define dump_state(x) do{}while(0)
#define UDC_DEBUG ((unsigned)0)
#endif
#define DBG(lvl, stuff...) do{if ((lvl) <= UDC_DEBUG) DMSG(stuff);}while(0)
#define WARN(stuff...) printk(KERN_WARNING "udc: " stuff)
#define INFO(stuff...) printk(KERN_INFO "udc: " stuff)
#endif /* __LINUX_USB_GADGET_PXA2XX_H */
