/*
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
* The full GNU General Public License is included in this distribution
* in the file called LICENSE.GPL.
*
* BSD LICENSE
*
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include "intel_sas.h"
#include "intel_ata.h"
#include "isci.h"
#include "port.h"
#include "remote_device.h"
#include "request.h"
#include "scic_controller.h"
#include "scic_io_request.h"
#include "scic_phy.h"
#include "scic_port.h"
#include "scic_sds_controller.h"
#include "scic_sds_phy.h"
#include "scic_sds_port.h"
#include "remote_node_context.h"
#include "scic_sds_request.h"
#include "sci_environment.h"
#include "sci_util.h"
#include "scu_event_codes.h"
#include "task.h"
/**
* isci_remote_device_change_state() - This function gets the status of the
* remote_device object.
* @isci_device: This parameter points to the isci_remote_device object
*
* status of the object as a isci_status enum.
*/
void isci_remote_device_change_state(
struct isci_remote_device *isci_device,
enum isci_status status)
{
unsigned long flags;
spin_lock_irqsave(&isci_device->state_lock, flags);
isci_device->status = status;
spin_unlock_irqrestore(&isci_device->state_lock, flags);
}
/**
* isci_remote_device_not_ready() - This function is called by the scic when
* the remote device is not ready. We mark the isci device as ready (not
* "ready_for_io") and signal the waiting proccess.
* @isci_host: This parameter specifies the isci host object.
* @isci_device: This parameter specifies the remote device
*
*/
static void isci_remote_device_not_ready(struct isci_host *ihost,
struct isci_remote_device *idev, u32 reason)
{
dev_dbg(&ihost->pdev->dev,
"%s: isci_device = %p\n", __func__, idev);
if (reason == SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED)
isci_remote_device_change_state(idev, isci_stopping);
else
/* device ready is actually a "not ready for io" state. */
isci_remote_device_change_state(idev, isci_ready);
}
/**
* isci_remote_device_ready() - This function is called by the scic when the
* remote device is ready. We mark the isci device as ready and signal the
* waiting proccess.
* @ihost: our valid isci_host
* @idev: remote device
*
*/
static void isci_remote_device_ready(struct isci_host *ihost, struct isci_remote_device *idev)
{
dev_dbg(&ihost->pdev->dev,
"%s: idev = %p\n", __func__, idev);
isci_remote_device_change_state(idev, isci_ready_for_io);
if (test_and_clear_bit(IDEV_START_PENDING, &idev->flags))
wake_up(&ihost->eventq);
}
enum sci_status scic_remote_device_stop(
struct scic_sds_remote_device *sci_dev,
u32 timeout)
{
return sci_dev->state_handlers->stop_handler(sci_dev);
}
enum sci_status scic_remote_device_reset(
struct scic_sds_remote_device *sci_dev)
{
return sci_dev->state_handlers->reset_handler(sci_dev);
}
enum sci_status scic_remote_device_reset_complete(
struct scic_sds_remote_device *sci_dev)
{
return sci_dev->state_handlers->reset_complete_handler(sci_dev);
}
#define SCIC_SDS_REMOTE_DEVICE_MINIMUM_TIMER_COUNT (0)
#define SCIC_SDS_REMOTE_DEVICE_MAXIMUM_TIMER_COUNT (SCI_MAX_REMOTE_DEVICES)
/**
*
* @sci_dev: The remote device for which the suspend is being requested.
*
* This method invokes the remote device suspend state handler. enum sci_status
*/
enum sci_status scic_sds_remote_device_suspend(
struct scic_sds_remote_device *sci_dev,
u32 suspend_type)
{
return sci_dev->state_handlers->suspend_handler(sci_dev, suspend_type);
}
/**
*
* @sci_dev: The remote device for which the event handling is being
* requested.
* @frame_index: This is the frame index that is being processed.
*
* This method invokes the frame handler for the remote device state machine
* enum sci_status
*/
enum sci_status scic_sds_remote_device_frame_handler(
struct scic_sds_remote_device *sci_dev,
u32 frame_index)
{
return sci_dev->state_handlers->frame_handler(sci_dev, frame_index);
}
/**
*
* @sci_dev: The remote device for which the event handling is being
* requested.
* @event_code: This is the event code that is to be processed.
*
* This method invokes the remote device event handler. enum sci_status
*/
enum sci_status scic_sds_remote_device_event_handler(
struct scic_sds_remote_device *sci_dev,
u32 event_code)
{
return sci_dev->state_handlers->event_handler(sci_dev, event_code);
}
/**
*
* @controller: The controller that is starting the io request.
* @sci_dev: The remote device for which the start io handling is being
* requested.
* @io_request: The io request that is being started.
*
* This method invokes the remote device start io handler. enum sci_status
*/
enum sci_status scic_sds_remote_device_start_io(
struct scic_sds_controller *controller,
struct scic_sds_remote_device *sci_dev,
struct scic_sds_request *io_request)
{
return sci_dev->state_handlers->start_io_handler(
sci_dev, io_request);
}
/**
*
* @controller: The controller that is completing the io request.
* @sci_dev: The remote device for which the complete io handling is being
* requested.
* @io_request: The io request that is being completed.
*
* This method invokes the remote device complete io handler. enum sci_status
*/
enum sci_status scic_sds_remote_device_complete_io(
struct scic_sds_controller *controller,
struct scic_sds_remote_device *sci_dev,
struct scic_sds_request *io_request)
{
return sci_dev->state_handlers->complete_io_handler(
sci_dev, io_request);
}
/**
*
* @controller: The controller that is starting the task request.
* @sci_dev: The remote device for which the start task handling is being
* requested.
* @io_request: The task request that is being started.
*
* This method invokes the remote device start task handler. enum sci_status
*/
enum sci_status scic_sds_remote_device_start_task(
struct scic_sds_controller *controller,
struct scic_sds_remote_device *sci_dev,
struct scic_sds_request *io_request)
{
return sci_dev->state_handlers->start_task_handler(
sci_dev, io_request);
}
/**
*
* @sci_dev:
* @request:
*
* This method takes the request and bulids an appropriate SCU context for the
* request and then requests the controller to post the request. none
*/
void scic_sds_remote_device_post_request(
struct scic_sds_remote_device *sci_dev,
u32 request)
{
u32 context;
context = scic_sds_remote_device_build_command_context(sci_dev, request);
scic_sds_controller_post_request(
scic_sds_remote_device_get_controller(sci_dev),
context
);
}
/* called once the remote node context is ready to be freed.
* The remote device can now report that its stop operation is complete. none
*/
static void scic_sds_cb_remote_device_rnc_destruct_complete(void *_dev)
{
struct scic_sds_remote_device *sci_dev = _dev;
BUG_ON(sci_dev->started_request_count != 0);
sci_base_state_machine_change_state(&sci_dev->state_machine,
SCI_BASE_REMOTE_DEVICE_STATE_STOPPED);
}
/* called once the remote node context has transisitioned to a
* ready state. This is the indication that the remote device object can also
* transition to ready.
*/
static void remote_device_resume_done(void *_dev)
{
struct scic_sds_remote_device *sci_dev = _dev;
enum scic_sds_remote_device_states state;
state = sci_dev->state_machine.current_state_id;
switch (state) {
case SCI_BASE_REMOTE_DEVICE_STATE_READY:
case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE:
case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD:
case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ:
case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR:
case SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET:
case SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE:
case SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD:
break;
default:
/* go 'ready' if we are not already in a ready state */
sci_base_state_machine_change_state(&sci_dev->state_machine,
SCI_BASE_REMOTE_DEVICE_STATE_READY);
break;
}
}
/**
*
* @device: This parameter specifies the device for which the request is being
* started.
* @request: This parameter specifies the request being started.
* @status: This parameter specifies the current start operation status.
*
* This method will perform the STP request start processing common to IO
* requests and task requests of all types. none
*/
static void scic_sds_remote_device_start_request(
struct scic_sds_remote_device *sci_dev,
struct scic_sds_request *sci_req,
enum sci_status status)
{
/* We still have a fault in starting the io complete it on the port */
if (status == SCI_SUCCESS)
scic_sds_remote_device_increment_request_count(sci_dev);
else{
sci_dev->owning_port->state_handlers->complete_io_handler(
sci_dev->owning_port, sci_dev, sci_req
);
}
}
/**
*
* @request: This parameter specifies the request being continued.
*
* This method will continue to post tc for a STP request. This method usually
* serves as a callback when RNC gets resumed during a task management
* sequence. none
*/
static void scic_sds_remote_device_continue_request(void *dev)
{
struct scic_sds_remote_device *sci_dev = dev;
/* we need to check if this request is still valid to continue. */
if (sci_dev->working_request)
scic_controller_continue_io(sci_dev->working_request);
}
/**
* This method will terminate all of the IO requests in the controllers IO
* request table that were targeted for this device.
* @sci_dev: This parameter specifies the remote device for which to
* attempt to terminate all requests.
*
* This method returns an indication as to whether all requests were
* successfully terminated. If a single request fails to be terminated, then
* this method will return the failure.
*/
static enum sci_status scic_sds_remote_device_terminate_requests(
struct scic_sds_remote_device *sci_dev)
{
enum sci_status status = SCI_SUCCESS;
enum sci_status terminate_status = SCI_SUCCESS;
struct scic_sds_request *sci_req;
u32 index;
u32 request_count = sci_dev->started_request_count;
for (index = 0;
(index < SCI_MAX_IO_REQUESTS) && (request_count > 0);
index++) {
sci_req = sci_dev->owning_port->owning_controller->io_request_table[index];
if ((sci_req != NULL) && (sci_req->target_device == sci_dev)) {
terminate_status = scic_controller_terminate_request(
sci_dev->owning_port->owning_controller,
sci_dev,
sci_req
);
if (terminate_status != SCI_SUCCESS)
status = terminate_status;
request_count--;
}
}
return status;
}
static enum sci_status
default_device_handler(struct scic_sds_remote_device *sci_dev,
const char *func)
{
dev_warn(scirdev_to_dev(sci_dev),
"%s: in wrong state: %d\n", func,
sci_base_state_machine_get_state(&sci_dev->state_machine));
return SCI_FAILURE_INVALID_STATE;
}
static enum sci_status scic_sds_remote_device_default_stop_handler(
struct scic_sds_remote_device *sci_dev)
{
return default_device_handler(sci_dev, __func__);
}
static enum sci_status scic_sds_remote_device_default_fail_handler(
struct scic_sds_remote_device *sci_dev)
{
return default_device_handler(sci_dev, __func__);
}
static enum sci_status scic_sds_remote_device_default_destruct_handler(
struct scic_sds_remote_device *sci_dev)
{
return default_device_handler(sci_dev, __func__);
}
static enum sci_status scic_sds_remote_device_default_reset_handler(
struct scic_sds_remote_device *sci_dev)
{
return default_device_handler(sci_dev, __func__);
}
static enum sci_status scic_sds_remote_device_default_reset_complete_handler(
struct scic_sds_remote_device *sci_dev)
{
return default_device_handler(sci_dev, __func__);
}
static enum sci_status scic_sds_remote_device_default_suspend_handler(
struct scic_sds_remote_device *sci_dev, u32 suspend_type)
{
return default_device_handler(sci_dev, __func__);
}
static enum sci_status scic_sds_remote_device_default_resume_handler(
struct scic_sds_remote_device *sci_dev)
{
return default_device_handler(sci_dev, __func__);
}
/**
*
* @device: The struct scic_sds_remote_device which is then cast into a
* struct scic_sds_remote_device.
* @event_code: The event code that the struct scic_sds_controller wants the device
* object to process.
*
* This method is the default event handler. It will call the RNC state
* machine handler for any RNC events otherwise it will log a warning and
* returns a failure. enum sci_status SCI_FAILURE_INVALID_STATE
*/
static enum sci_status scic_sds_remote_device_core_event_handler(
struct scic_sds_remote_device *sci_dev,
u32 event_code,
bool is_ready_state)
{
enum sci_status status;
switch (scu_get_event_type(event_code)) {
case SCU_EVENT_TYPE_RNC_OPS_MISC:
case SCU_EVENT_TYPE_RNC_SUSPEND_TX:
case SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX:
status = scic_sds_remote_node_context_event_handler(&sci_dev->rnc, event_code);
break;
case SCU_EVENT_TYPE_PTX_SCHEDULE_EVENT:
if (scu_get_event_code(event_code) == SCU_EVENT_IT_NEXUS_TIMEOUT) {
status = SCI_SUCCESS;
/* Suspend the associated RNC */
scic_sds_remote_node_context_suspend(&sci_dev->rnc,
SCI_SOFTWARE_SUSPENSION,
NULL, NULL);
dev_dbg(scirdev_to_dev(sci_dev),
"%s: device: %p event code: %x: %s\n",
__func__, sci_dev, event_code,
(is_ready_state)
? "I_T_Nexus_Timeout event"
: "I_T_Nexus_Timeout event in wrong state");
break;
}
/* Else, fall through and treat as unhandled... */
default:
dev_dbg(scirdev_to_dev(sci_dev),
"%s: device: %p event code: %x: %s\n",
__func__, sci_dev, event_code,
(is_ready_state)
? "unexpected event"
: "unexpected event in wrong state");
status = SCI_FAILURE_INVALID_STATE;
break;
}
return status;
}
/**
*
* @device: The struct scic_sds_remote_device which is then cast into a
* struct scic_sds_remote_device.
* @event_code: The event code that the struct scic_sds_controller wants the device
* object to process.
*
* This method is the default event handler. It will call the RNC state
* machine handler for any RNC events otherwise it will log a warning and
* returns a failure. enum sci_status SCI_FAILURE_INVALID_STATE
*/
static enum sci_status scic_sds_remote_device_default_event_handler(
struct scic_sds_remote_device *sci_dev,
u32 event_code)
{
return scic_sds_remote_device_core_event_handler(sci_dev,
event_code,
false);
}
/**
*
* @device: The struct scic_sds_remote_device which is then cast into a
* struct scic_sds_remote_device.
* @frame_index: The frame index for which the struct scic_sds_controller wants this
* device object to process.
*
* This method is the default unsolicited frame handler. It logs a warning,
* releases the frame and returns a failure. enum sci_status
* SCI_FAILURE_INVALID_STATE
*/
static enum sci_status scic_sds_remote_device_default_frame_handler(
struct scic_sds_remote_device *sci_dev,
u32 frame_index)
{
dev_warn(scirdev_to_dev(sci_dev),
"%s: SCIC Remote Device requested to handle frame %x "
"while in wrong state %d\n",
__func__,
frame_index,
sci_base_state_machine_get_state(
&sci_dev->state_machine));
/* Return the frame back to the controller */
scic_sds_controller_release_frame(
scic_sds_remote_device_get_controller(sci_dev), frame_index
);
return SCI_FAILURE_INVALID_STATE;
}
static enum sci_status scic_sds_remote_device_default_start_request_handler(
struct scic_sds_remote_device *sci_dev,
struct scic_sds_request *request)
{
return default_device_handler(sci_dev, __func__);
}
static enum sci_status scic_sds_remote_device_default_complete_request_handler(
struct scic_sds_remote_device *sci_dev,
struct scic_sds_request *request)
{
return default_device_handler(sci_dev, __func__);
}
static enum sci_status scic_sds_remote_device_default_continue_request_handler(
struct scic_sds_remote_device *sci_dev,
struct scic_sds_request *request)
{
return default_device_handler(sci_dev, __func__);
}
/**
*
* @device: The struct scic_sds_remote_device which is then cast into a
* struct scic_sds_remote_device.
* @frame_index: The frame index for which the struct scic_sds_controller wants this
* device object to process.
*
* This method is a general ssp frame handler. In most cases the device object
* needs to route the unsolicited frame processing to the io request object.
* This method decodes the tag for the io request object and routes the
* unsolicited frame to that object. enum sci_status SCI_FAILURE_INVALID_STATE
*/
static enum sci_status scic_sds_remote_device_general_frame_handler(
struct scic_sds_remote_device *sci_dev,
u32 frame_index)
{
enum sci_status result;
struct sci_ssp_frame_header *frame_header;
struct scic_sds_request *io_request;
result = scic_sds_unsolicited_frame_control_get_header(
&(scic_sds_remote_device_get_controller(sci_dev)->uf_control),
frame_index,
(void **)&frame_header
);
if (SCI_SUCCESS == result) {
io_request = scic_sds_controller_get_io_request_from_tag(
scic_sds_remote_device_get_controller(sci_dev), frame_header->tag);
if ((io_request == NULL)
|| (io_request->target_device != sci_dev)) {
/*
* We could not map this tag to a valid IO request
* Just toss the frame and continue */
scic_sds_controller_release_frame(
scic_sds_remote_device_get_controller(sci_dev), frame_index
);
} else {
/* The IO request is now in charge of releasing the frame */
result = io_request->state_handlers->frame_handler(
io_request, frame_index);
}
}
return result;
}
/**
*
* @[in]: sci_dev This is the device object that is receiving the event.
* @[in]: event_code The event code to process.
*
* This is a common method for handling events reported to the remote device
* from the controller object. enum sci_status
*/
static enum sci_status scic_sds_remote_device_general_event_handler(
struct scic_sds_remote_device *sci_dev,
u32 event_code)
{
return scic_sds_remote_device_core_event_handler(sci_dev,
event_code,
true);
}
static enum sci_status scic_sds_remote_device_stopped_state_stop_handler(
struct scic_sds_remote_device *sci_dev)
{
return SCI_SUCCESS;
}
/**
*
* @sci_dev: The struct scic_sds_remote_device which is cast into a
* struct scic_sds_remote_device.
*
* This method will destruct a struct scic_sds_remote_device that is in a stopped
* state. This is the only state from which a destruct request will succeed.
* The RNi for this struct scic_sds_remote_device is returned to the free pool and the
* device object transitions to the SCI_BASE_REMOTE_DEVICE_STATE_FINAL.
* enum sci_status SCI_SUCCESS
*/
static enum sci_status scic_sds_remote_device_stopped_state_destruct_handler(
struct scic_sds_remote_device *sci_dev)
{
struct scic_sds_controller *scic;
scic = scic_sds_remote_device_get_controller(sci_dev);
scic_sds_controller_free_remote_node_context(scic, sci_dev,
sci_dev->rnc.remote_node_index);
sci_dev->rnc.remote_node_index = SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX;
sci_base_state_machine_change_state(&sci_dev->state_machine,
SCI_BASE_REMOTE_DEVICE_STATE_FINAL);
return SCI_SUCCESS;
}
/*
* *****************************************************************************
* * STARTING STATE HANDLERS
* ***************************************************************************** */
static enum sci_status scic_sds_remote_device_starting_state_stop_handler(
struct scic_sds_remote_device *sci_dev)
{
/*
* This device has not yet started so there had better be no IO requests
*/
BUG_ON(sci_dev->started_request_count != 0);
/*
* Destroy the remote node context
*/
scic_sds_remote_node_context_destruct(&sci_dev->rnc,
scic_sds_cb_remote_device_rnc_destruct_complete, sci_dev);
/*
* Transition to the stopping state and wait for the remote node to
* complete being posted and invalidated.
*/
sci_base_state_machine_change_state(&sci_dev->state_machine,
SCI_BASE_REMOTE_DEVICE_STATE_STOPPING);
return SCI_SUCCESS;
}
static enum sci_status scic_sds_remote_device_ready_state_stop_handler(
struct scic_sds_remote_device *sci_dev)
{
enum sci_status status = SCI_SUCCESS;
/* Request the parent state machine to transition to the stopping state */
sci_base_state_machine_change_state(&sci_dev->state_machine,
SCI_BASE_REMOTE_DEVICE_STATE_STOPPING);
if (sci_dev->started_request_count == 0) {
scic_sds_remote_node_context_destruct(&sci_dev->rnc,
scic_sds_cb_remote_device_rnc_destruct_complete,
sci_dev);
} else
status = scic_sds_remote_device_terminate_requests(sci_dev);
return status;
}
/**
*
* @device: The struct scic_sds_remote_device object which is cast to a
* struct scic_sds_remote_device object.
*
* This is the ready state device reset handler enum sci_status
*/
static enum sci_status scic_sds_remote_device_ready_state_reset_handler(
struct scic_sds_remote_device *sci_dev)
{
/* Request the parent state machine to transition to the stopping state */
sci_base_state_machine_change_state(&sci_dev->state_machine,
SCI_BASE_REMOTE_DEVICE_STATE_RESETTING);
return SCI_SUCCESS;
}
/*
* This method will attempt to start a task request for this device object. The
* remote device object will issue the start request for the task and if
* successful it will start the request for the port object then increment its
* own requet count. enum sci_status SCI_SUCCESS if the task request is started for
* this device object. SCI_FAILURE_INSUFFICIENT_RESOURCES if the io request
* object could not get the resources to start.
*/
static enum sci_status scic_sds_remote_device_ready_state_start_task_handler(
struct scic_sds_remote_device *sci_dev,
struct scic_sds_request *request)
{
enum sci_status result;
/* See if the port is in a state where we can start the IO request */
result = scic_sds_port_start_io(
scic_sds_remote_device_get_port(sci_dev), sci_dev, request);
if (result == SCI_SUCCESS) {
result = scic_sds_remote_node_context_start_task(&sci_dev->rnc,
request);
if (result == SCI_SUCCESS)
result = scic_sds_request_start(request);
scic_sds_remote_device_start_request(sci_dev, request, result);
}
return result;
}
/*
* This method will attempt to start an io request for this device object. The
* remote device object will issue the start request for the io and if
* successful it will start the request for the port object then increment its
* own requet count. enum sci_status SCI_SUCCESS if the io request is started for
* this device object. SCI_FAILURE_INSUFFICIENT_RESOURCES if the io request
* object could not get the resources to start.
*/
static enum sci_status scic_sds_remote_device_ready_state_start_io_handler(
struct scic_sds_remote_device *sci_dev,
struct scic_sds_request *request)
{
enum sci_status result;
/* See if the port is in a state where we can start the IO request */
result = scic_sds_port_start_io(
scic_sds_remote_device_get_port(sci_dev), sci_dev, request);
if (result == SCI_SUCCESS) {
result = scic_sds_remote_node_context_start_io(&sci_dev->rnc, request);
if (result == SCI_SUCCESS)
result = scic_sds_request_start(request);
scic_sds_remote_device_start_request(sci_dev, request, result);
}
return result;
}
/*
* This method will complete the request for the remote device object. The
* method will call the completion handler for the request object and if
* successful it will complete the request on the port object then decrement
* its own started_request_count. enum sci_status
*/
static enum sci_status scic_sds_remote_device_ready_state_complete_request_handler(
struct scic_sds_remote_device *sci_dev,
struct scic_sds_request *request)
{
enum sci_status result;
result = scic_sds_request_complete(request);
if (result != SCI_SUCCESS)
return result;
/* See if the port is in a state
* where we can start the IO request */
result = scic_sds_port_complete_io(
scic_sds_remote_device_get_port(sci_dev),
sci_dev, request);
if (result == SCI_SUCCESS)
scic_sds_remote_device_decrement_request_count(sci_dev);
return result;
}
/*
* *****************************************************************************
* * STOPPING STATE HANDLERS
* ***************************************************************************** */
/**
*
* @sci_dev: The struct scic_sds_remote_device which is cast into a
* struct scic_sds_remote_device.
*
* This method will stop a struct scic_sds_remote_device that is already in the
* SCI_BASE_REMOTE_DEVICE_STATE_STOPPING state. This is not considered an error
* since we allow a stop request on a device that is alreay stopping or
* stopped. enum sci_status SCI_SUCCESS
*/
static enum sci_status scic_sds_remote_device_stopping_state_stop_handler(
struct scic_sds_remote_device *device)
{
/*
* All requests should have been terminated, but if there is an
* attempt to stop a device already in the stopping state, then
* try again to terminate. */
return scic_sds_remote_device_terminate_requests(device);
}
/**
*
* @device: The device object for which the request is completing.
* @request: The task request that is being completed.
*
* This method completes requests for this struct scic_sds_remote_device while it is
* in the SCI_BASE_REMOTE_DEVICE_STATE_STOPPING state. This method calls the
* complete method for the request object and if that is successful the port
* object is called to complete the task request. Then the device object itself
* completes the task request. If struct scic_sds_remote_device started_request_count
* goes to 0 and the invalidate RNC request has completed the device object can
* transition to the SCI_BASE_REMOTE_DEVICE_STATE_STOPPED. enum sci_status
*/
static enum sci_status scic_sds_remote_device_stopping_state_complete_request_handler(
struct scic_sds_remote_device *sci_dev,
struct scic_sds_request *request)
{
enum sci_status status = SCI_SUCCESS;
status = scic_sds_request_complete(request);
if (status != SCI_SUCCESS)
return status;
status = scic_sds_port_complete_io(scic_sds_remote_device_get_port(sci_dev),
sci_dev, request);
if (status != SCI_SUCCESS)
return status;
scic_sds_remote_device_decrement_request_count(sci_dev);
if (scic_sds_remote_device_get_request_count(sci_dev) == 0)
scic_sds_remote_node_context_destruct(&sci_dev->rnc,
scic_sds_cb_remote_device_rnc_destruct_complete,
sci_dev);
return SCI_SUCCESS;
}
static enum sci_status scic_sds_remote_device_resetting_state_reset_complete_handler(
struct scic_sds_remote_device *sci_dev)
{
sci_base_state_machine_change_state(&sci_dev->state_machine,
SCI_BASE_REMOTE_DEVICE_STATE_READY);
return SCI_SUCCESS;
}
static enum sci_status scic_sds_remote_device_resetting_state_stop_handler(
struct scic_sds_remote_device *sci_dev)
{
sci_base_state_machine_change_state(
&sci_dev->state_machine,
SCI_BASE_REMOTE_DEVICE_STATE_STOPPING
);
return SCI_SUCCESS;
}
/* complete requests for this device while it is in the
* SCI_BASE_REMOTE_DEVICE_STATE_RESETTING state. This method calls the complete
* method for the request object and if that is successful the port object is
* called to complete the task request. Then the device object itself completes
* the task request. enum sci_status
*/
static enum sci_status scic_sds_remote_device_resetting_state_complete_request_handler(
struct scic_sds_remote_device *sci_dev,
struct scic_sds_request *request)
{
enum sci_status status = SCI_SUCCESS;
status = scic_sds_request_complete(request);
if (status == SCI_SUCCESS) {
status = scic_sds_port_complete_io(
scic_sds_remote_device_get_port(sci_dev),
sci_dev, request);
if (status == SCI_SUCCESS) {
scic_sds_remote_device_decrement_request_count(sci_dev);
}
}
return status;
}
static enum sci_status scic_sds_stp_remote_device_complete_request(struct scic_sds_remote_device *sci_dev,
struct scic_sds_request *sci_req)
{
enum sci_status status;
status = scic_sds_io_request_complete(sci_req);
if (status != SCI_SUCCESS)
goto out;
status = scic_sds_port_complete_io(sci_dev->owning_port, sci_dev, sci_req);
if (status != SCI_SUCCESS)
goto out;
scic_sds_remote_device_decrement_request_count(sci_dev);
if (sci_req->sci_status == SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED) {
/* This request causes hardware error, device needs to be Lun Reset.
* So here we force the state machine to IDLE state so the rest IOs
* can reach RNC state handler, these IOs will be completed by RNC with
* status of "DEVICE_RESET_REQUIRED", instead of "INVALID STATE".
*/
sci_base_state_machine_change_state(&sci_dev->state_machine,
SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET);
} else if (scic_sds_remote_device_get_request_count(sci_dev) == 0)
sci_base_state_machine_change_state(&sci_dev->state_machine,
SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE);
out:
if (status != SCI_SUCCESS)
dev_err(scirdev_to_dev(sci_dev),
"%s: Port:0x%p Device:0x%p Request:0x%p Status:0x%x "
"could not complete\n", __func__, sci_dev->owning_port,
sci_dev, sci_req, status);
return status;
}
/* scic_sds_stp_remote_device_ready_substate_start_request_handler - start stp
* @device: The target device a task management request towards to.
* @request: The task request.
*
* This is the READY NCQ substate handler to start task management request. In
* this routine, we suspend and resume the RNC. enum sci_status Always return
* SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS status to let
* controller_start_task_handler know that the controller can't post TC for
* task request yet, instead, when RNC gets resumed, a controller_continue_task
* callback will be called.
*/
static enum sci_status scic_sds_stp_remote_device_ready_substate_start_request_handler(
struct scic_sds_remote_device *device,
struct scic_sds_request *request)
{
enum sci_status status;
/* Will the port allow the io request to start? */
status = device->owning_port->state_handlers->start_io_handler(
device->owning_port, device, request);
if (status != SCI_SUCCESS)
return status;
status = scic_sds_remote_node_context_start_task(&device->rnc, request);
if (status != SCI_SUCCESS)
goto out;
status = request->state_handlers->start_handler(request);
if (status != SCI_SUCCESS)
goto out;
/*
* Note: If the remote device state is not IDLE this will replace
* the request that probably resulted in the task management request.
*/
device->working_request = request;
sci_base_state_machine_change_state(&device->state_machine,
SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD);
/*
* The remote node context must cleanup the TCi to NCQ mapping table.
* The only way to do this correctly is to either write to the TLCR
* register or to invalidate and repost the RNC. In either case the
* remote node context state machine will take the correct action when
* the remote node context is suspended and later resumed.
*/
scic_sds_remote_node_context_suspend(&device->rnc,
SCI_SOFTWARE_SUSPENSION, NULL, NULL);
scic_sds_remote_node_context_resume(&device->rnc,
scic_sds_remote_device_continue_request,
device);
out:
scic_sds_remote_device_start_request(device, request, status);
/*
* We need to let the controller start request handler know that it can't
* post TC yet. We will provide a callback function to post TC when RNC gets
* resumed.
*/
return SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS;
}
/* handle the start io operation for a sata device that is in the command idle
* state. - Evalute the type of IO request to be started - If its an NCQ
* request change to NCQ substate - If its any other command change to the CMD
* substate
*
* If this is a softreset we may want to have a different substate.
*/
static enum sci_status scic_sds_stp_remote_device_ready_idle_substate_start_io_handler(
struct scic_sds_remote_device *sci_dev,
struct scic_sds_request *request)
{
enum sci_status status;
struct isci_request *isci_request = request->ireq;
enum scic_sds_remote_device_states new_state;
/* Will the port allow the io request to start? */
status = sci_dev->owning_port->state_handlers->start_io_handler(
sci_dev->owning_port, sci_dev, request);
if (status != SCI_SUCCESS)
return status;
status = scic_sds_remote_node_context_start_io(&sci_dev->rnc, request);
if (status != SCI_SUCCESS)
goto out;
status = request->state_handlers->start_handler(request);
if (status != SCI_SUCCESS)
goto out;
if (isci_sata_get_sat_protocol(isci_request) == SAT_PROTOCOL_FPDMA)
new_state = SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ;
else {
sci_dev->working_request = request;
new_state = SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD;
}
sci_base_state_machine_change_state(&sci_dev->state_machine, new_state);
out:
scic_sds_remote_device_start_request(sci_dev, request, status);
return status;
}
static enum sci_status scic_sds_stp_remote_device_ready_idle_substate_event_handler(
struct scic_sds_remote_device *sci_dev,
u32 event_code)
{
enum sci_status status;
status = scic_sds_remote_device_general_event_handler(sci_dev, event_code);
if (status != SCI_SUCCESS)
return status;
/* We pick up suspension events to handle specifically to this state. We
* resume the RNC right away. enum sci_status
*/
if (scu_get_event_type(event_code) == SCU_EVENT_TYPE_RNC_SUSPEND_TX ||
scu_get_event_type(event_code) == SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX)
status = scic_sds_remote_node_context_resume(&sci_dev->rnc, NULL, NULL);
return status;
}
static enum sci_status scic_sds_stp_remote_device_ready_ncq_substate_start_io_handler(
struct scic_sds_remote_device *sci_dev,
struct scic_sds_request *request)
{
enum sci_status status;
struct isci_request *isci_request = request->ireq;
scic_sds_port_io_request_handler_t start_io;
if (isci_sata_get_sat_protocol(isci_request) == SAT_PROTOCOL_FPDMA) {
start_io = sci_dev->owning_port->state_handlers->start_io_handler;
status = start_io(sci_dev->owning_port, sci_dev, request);
if (status != SCI_SUCCESS)
return status;
status = scic_sds_remote_node_context_start_io(&sci_dev->rnc, request);
if (status == SCI_SUCCESS)
status = request->state_handlers->start_handler(request);
scic_sds_remote_device_start_request(sci_dev, request, status);
} else
status = SCI_FAILURE_INVALID_STATE;
return status;
}
static enum sci_status scic_sds_stp_remote_device_ready_ncq_substate_frame_handler(struct scic_sds_remote_device *sci_dev,
u32 frame_index)
{
enum sci_status status;
struct sata_fis_header *frame_header;
struct scic_sds_controller *scic = sci_dev->owning_port->owning_controller;
status = scic_sds_unsolicited_frame_control_get_header(&scic->uf_control,
frame_index,
(void **)&frame_header);
if (status != SCI_SUCCESS)
return status;
if (frame_header->fis_type == SATA_FIS_TYPE_SETDEVBITS &&
(frame_header->status & ATA_STATUS_REG_ERROR_BIT)) {
sci_dev->not_ready_reason = SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED;
/* TODO Check sactive and complete associated IO if any. */
sci_base_state_machine_change_state(&sci_dev->state_machine,
SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR);
} else if (frame_header->fis_type == SATA_FIS_TYPE_REGD2H &&
(frame_header->status & ATA_STATUS_REG_ERROR_BIT)) {
/*
* Some devices return D2H FIS when an NCQ error is detected.
* Treat this like an SDB error FIS ready reason.
*/
sci_dev->not_ready_reason = SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED;
sci_base_state_machine_change_state(&sci_dev->state_machine,
SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR);
} else
status = SCI_FAILURE;
scic_sds_controller_release_frame(scic, frame_index);
return status;
}
static enum sci_status scic_sds_stp_remote_device_ready_cmd_substate_start_io_handler(
struct scic_sds_remote_device *device,
struct scic_sds_request *request)
{
/* device is already handling a command it can not accept new commands
* until this one is complete.
*/
return SCI_FAILURE_INVALID_STATE;
}
static enum sci_status scic_sds_stp_remote_device_ready_cmd_substate_suspend_handler(
struct scic_sds_remote_device *sci_dev,
u32 suspend_type)
{
enum sci_status status;
status = scic_sds_remote_node_context_suspend(&sci_dev->rnc,
suspend_type, NULL, NULL);
return status;
}
static enum sci_status scic_sds_stp_remote_device_ready_cmd_substate_frame_handler(
struct scic_sds_remote_device *sci_dev,
u32 frame_index)
{
/* The device doe not process any UF received from the hardware while
* in this state. All unsolicited frames are forwarded to the io
* request object.
*/
return scic_sds_io_request_frame_handler(sci_dev->working_request,
frame_index);
}
static enum sci_status scic_sds_stp_remote_device_ready_await_reset_substate_start_io_handler(
struct scic_sds_remote_device *device,
struct scic_sds_request *request)
{
return SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED;
}
static enum sci_status scic_sds_stp_remote_device_ready_await_reset_substate_complete_request_handler(
struct scic_sds_remote_device *device,
struct scic_sds_request *request)
{
struct scic_sds_request *sci_req = request;
enum sci_status status;
status = scic_sds_io_request_complete(sci_req);
if (status != SCI_SUCCESS)
goto out;
status = scic_sds_port_complete_io(device->owning_port, device, sci_req);
if (status != SCI_SUCCESS)
goto out;
scic_sds_remote_device_decrement_request_count(device);
out:
if (status != SCI_SUCCESS)
dev_err(scirdev_to_dev(device),
"%s: Port:0x%p Device:0x%p Request:0x%p Status:0x%x "
"could not complete\n",
__func__, device->owning_port, device, sci_req, status);
return status;
}
static void scic_sds_stp_remote_device_ready_idle_substate_resume_complete_handler(void *_dev)
{
struct scic_sds_remote_device *sci_dev = _dev;
struct isci_remote_device *idev = sci_dev_to_idev(sci_dev);
struct scic_sds_controller *scic = sci_dev->owning_port->owning_controller;
/* For NCQ operation we do not issue a isci_remote_device_not_ready().
* As a result, avoid sending the ready notification.
*/
if (sci_dev->state_machine.previous_state_id != SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ)
isci_remote_device_ready(scic->ihost, idev);
}
static enum sci_status scic_sds_smp_remote_device_ready_idle_substate_start_io_handler(
struct scic_sds_remote_device *sci_dev,
struct scic_sds_request *sci_req)
{
enum sci_status status;
/* Will the port allow the io request to start? */
status = sci_dev->owning_port->state_handlers->start_io_handler(
sci_dev->owning_port, sci_dev, sci_req);
if (status != SCI_SUCCESS)
return status;
status = scic_sds_remote_node_context_start_io(&sci_dev->rnc, sci_req);
if (status != SCI_SUCCESS)
goto out;
status = scic_sds_request_start(sci_req);
if (status != SCI_SUCCESS)
goto out;
sci_dev->working_request = sci_req;
sci_base_state_machine_change_state(&sci_dev->state_machine,
SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD);
out:
scic_sds_remote_device_start_request(sci_dev, sci_req, status);
return status;
}
static enum sci_status scic_sds_smp_remote_device_ready_cmd_substate_start_io_handler(
struct scic_sds_remote_device *device,
struct scic_sds_request *request)
{
/* device is already handling a command it can not accept new commands
* until this one is complete.
*/
return SCI_FAILURE_INVALID_STATE;
}
static enum sci_status
scic_sds_smp_remote_device_ready_cmd_substate_complete_io_handler(struct scic_sds_remote_device *sci_dev,
struct scic_sds_request *sci_req)
{
enum sci_status status;
status = scic_sds_io_request_complete(sci_req);
if (status != SCI_SUCCESS)
return status;
status = scic_sds_port_complete_io(sci_dev->owning_port, sci_dev, sci_req);
if (status != SCI_SUCCESS) {
dev_err(scirdev_to_dev(sci_dev),
"%s: SCIC SDS Remote Device 0x%p io request "
"0x%p could not be completd on the port 0x%p "
"failed with status %d.\n", __func__, sci_dev, sci_req,
sci_dev->owning_port, status);
return status;
}
scic_sds_remote_device_decrement_request_count(sci_dev);
sci_base_state_machine_change_state(&sci_dev->state_machine,
SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE);
return status;
}
static enum sci_status scic_sds_smp_remote_device_ready_cmd_substate_frame_handler(
struct scic_sds_remote_device *sci_dev,
u32 frame_index)
{
enum sci_status status;
/* The device does not process any UF received from the hardware while
* in this state. All unsolicited frames are forwarded to the io request
* object.
*/
status = scic_sds_io_request_frame_handler(
sci_dev->working_request,
frame_index
);
return status;
}
static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_state_handler_table[] = {
[SCI_BASE_REMOTE_DEVICE_STATE_INITIAL] = {
.stop_handler = scic_sds_remote_device_default_stop_handler,
.fail_handler = scic_sds_remote_device_default_fail_handler,
.destruct_handler = scic_sds_remote_device_default_destruct_handler,
.reset_handler = scic_sds_remote_device_default_reset_handler,
.reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler,
.start_io_handler = scic_sds_remote_device_default_start_request_handler,
.complete_io_handler = scic_sds_remote_device_default_complete_request_handler,
.continue_io_handler = scic_sds_remote_device_default_continue_request_handler,
.start_task_handler = scic_sds_remote_device_default_start_request_handler,
.complete_task_handler = scic_sds_remote_device_default_complete_request_handler,
.suspend_handler = scic_sds_remote_device_default_suspend_handler,
.resume_handler = scic_sds_remote_device_default_resume_handler,
.event_handler = scic_sds_remote_device_default_event_handler,
.frame_handler = scic_sds_remote_device_default_frame_handler
},
[SCI_BASE_REMOTE_DEVICE_STATE_STOPPED] = {
.stop_handler = scic_sds_remote_device_stopped_state_stop_handler,
.fail_handler = scic_sds_remote_device_default_fail_handler,
.destruct_handler = scic_sds_remote_device_stopped_state_destruct_handler,
.reset_handler = scic_sds_remote_device_default_reset_handler,
.reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler,
.start_io_handler = scic_sds_remote_device_default_start_request_handler,
.complete_io_handler = scic_sds_remote_device_default_complete_request_handler,
.continue_io_handler = scic_sds_remote_device_default_continue_request_handler,
.start_task_handler = scic_sds_remote_device_default_start_request_handler,
.complete_task_handler = scic_sds_remote_device_default_complete_request_handler,
.suspend_handler = scic_sds_remote_device_default_suspend_handler,
.resume_handler = scic_sds_remote_device_default_resume_handler,
.event_handler = scic_sds_remote_device_default_event_handler,
.frame_handler = scic_sds_remote_device_default_frame_handler
},
[SCI_BASE_REMOTE_DEVICE_STATE_STARTING] = {
.stop_handler = scic_sds_remote_device_starting_state_stop_handler,
.fail_handler = scic_sds_remote_device_default_fail_handler,
.destruct_handler = scic_sds_remote_device_default_destruct_handler,
.reset_handler = scic_sds_remote_device_default_reset_handler,
.reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler,
.start_io_handler = scic_sds_remote_device_default_start_request_handler,
.complete_io_handler = scic_sds_remote_device_default_complete_request_handler,
.continue_io_handler = scic_sds_remote_device_default_continue_request_handler,
.start_task_handler = scic_sds_remote_device_default_start_request_handler,
.complete_task_handler = scic_sds_remote_device_default_complete_request_handler,
.suspend_handler = scic_sds_remote_device_default_suspend_handler,
.resume_handler = scic_sds_remote_device_default_resume_handler,
.event_handler = scic_sds_remote_device_general_event_handler,
.frame_handler = scic_sds_remote_device_default_frame_handler
},
[SCI_BASE_REMOTE_DEVICE_STATE_READY] = {
.stop_handler = scic_sds_remote_device_ready_state_stop_handler,
.fail_handler = scic_sds_remote_device_default_fail_handler,
.destruct_handler = scic_sds_remote_device_default_destruct_handler,
.reset_handler = scic_sds_remote_device_ready_state_reset_handler,
.reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler,
.start_io_handler = scic_sds_remote_device_ready_state_start_io_handler,
.complete_io_handler = scic_sds_remote_device_ready_state_complete_request_handler,
.continue_io_handler = scic_sds_remote_device_default_continue_request_handler,
.start_task_handler = scic_sds_remote_device_ready_state_start_task_handler,
.complete_task_handler = scic_sds_remote_device_ready_state_complete_request_handler,
.suspend_handler = scic_sds_remote_device_default_suspend_handler,
.resume_handler = scic_sds_remote_device_default_resume_handler,
.event_handler = scic_sds_remote_device_general_event_handler,
.frame_handler = scic_sds_remote_device_general_frame_handler,
},
[SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = {
.stop_handler = scic_sds_remote_device_ready_state_stop_handler,
.fail_handler = scic_sds_remote_device_default_fail_handler,
.destruct_handler = scic_sds_remote_device_default_destruct_handler,
.reset_handler = scic_sds_remote_device_ready_state_reset_handler,
.reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler,
.start_io_handler = scic_sds_stp_remote_device_ready_idle_substate_start_io_handler,
.complete_io_handler = scic_sds_remote_device_default_complete_request_handler,
.continue_io_handler = scic_sds_remote_device_default_continue_request_handler,
.start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler,
.complete_task_handler = scic_sds_remote_device_default_complete_request_handler,
.suspend_handler = scic_sds_remote_device_default_suspend_handler,
.resume_handler = scic_sds_remote_device_default_resume_handler,
.event_handler = scic_sds_stp_remote_device_ready_idle_substate_event_handler,
.frame_handler = scic_sds_remote_device_default_frame_handler
},
[SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = {
.stop_handler = scic_sds_remote_device_ready_state_stop_handler,
.fail_handler = scic_sds_remote_device_default_fail_handler,
.destruct_handler = scic_sds_remote_device_default_destruct_handler,
.reset_handler = scic_sds_remote_device_ready_state_reset_handler,
.reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler,
.start_io_handler = scic_sds_stp_remote_device_ready_cmd_substate_start_io_handler,
.complete_io_handler = scic_sds_stp_remote_device_complete_request,
.continue_io_handler = scic_sds_remote_device_default_continue_request_handler,
.start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler,
.complete_task_handler = scic_sds_stp_remote_device_complete_request,
.suspend_handler = scic_sds_stp_remote_device_ready_cmd_substate_suspend_handler,
.resume_handler = scic_sds_remote_device_default_resume_handler,
.event_handler = scic_sds_remote_device_general_event_handler,
.frame_handler = scic_sds_stp_remote_device_ready_cmd_substate_frame_handler
},
[SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ] = {
.stop_handler = scic_sds_remote_device_ready_state_stop_handler,
.fail_handler = scic_sds_remote_device_default_fail_handler,
.destruct_handler = scic_sds_remote_device_default_destruct_handler,
.reset_handler = scic_sds_remote_device_ready_state_reset_handler,
.reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler,
.start_io_handler = scic_sds_stp_remote_device_ready_ncq_substate_start_io_handler,
.complete_io_handler = scic_sds_stp_remote_device_complete_request,
.continue_io_handler = scic_sds_remote_device_default_continue_request_handler,
.start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler,
.complete_task_handler = scic_sds_stp_remote_device_complete_request,
.suspend_handler = scic_sds_remote_device_default_suspend_handler,
.resume_handler = scic_sds_remote_device_default_resume_handler,
.event_handler = scic_sds_remote_device_general_event_handler,
.frame_handler = scic_sds_stp_remote_device_ready_ncq_substate_frame_handler
},
[SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR] = {
.stop_handler = scic_sds_remote_device_ready_state_stop_handler,
.fail_handler = scic_sds_remote_device_default_fail_handler,
.destruct_handler = scic_sds_remote_device_default_destruct_handler,
.reset_handler = scic_sds_remote_device_ready_state_reset_handler,
.reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler,
.start_io_handler = scic_sds_remote_device_default_start_request_handler,
.complete_io_handler = scic_sds_stp_remote_device_complete_request,
.continue_io_handler = scic_sds_remote_device_default_continue_request_handler,
.start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler,
.complete_task_handler = scic_sds_stp_remote_device_complete_request,
.suspend_handler = scic_sds_remote_device_default_suspend_handler,
.resume_handler = scic_sds_remote_device_default_resume_handler,
.event_handler = scic_sds_remote_device_general_event_handler,
.frame_handler = scic_sds_remote_device_general_frame_handler
},
[SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET] = {
.stop_handler = scic_sds_remote_device_ready_state_stop_handler,
.fail_handler = scic_sds_remote_device_default_fail_handler,
.destruct_handler = scic_sds_remote_device_default_destruct_handler,
.reset_handler = scic_sds_remote_device_ready_state_reset_handler,
.reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler,
.start_io_handler = scic_sds_stp_remote_device_ready_await_reset_substate_start_io_handler,
.complete_io_handler = scic_sds_stp_remote_device_ready_await_reset_substate_complete_request_handler,
.continue_io_handler = scic_sds_remote_device_default_continue_request_handler,
.start_task_handler = scic_sds_stp_remote_device_ready_substate_start_request_handler,
.complete_task_handler = scic_sds_stp_remote_device_complete_request,
.suspend_handler = scic_sds_remote_device_default_suspend_handler,
.resume_handler = scic_sds_remote_device_default_resume_handler,
.event_handler = scic_sds_remote_device_general_event_handler,
.frame_handler = scic_sds_remote_device_general_frame_handler
},
[SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = {
.stop_handler = scic_sds_remote_device_ready_state_stop_handler,
.fail_handler = scic_sds_remote_device_default_fail_handler,
.destruct_handler = scic_sds_remote_device_default_destruct_handler,
.reset_handler = scic_sds_remote_device_default_reset_handler,
.reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler,
.start_io_handler = scic_sds_smp_remote_device_ready_idle_substate_start_io_handler,
.complete_io_handler = scic_sds_remote_device_default_complete_request_handler,
.continue_io_handler = scic_sds_remote_device_default_continue_request_handler,
.start_task_handler = scic_sds_remote_device_default_start_request_handler,
.complete_task_handler = scic_sds_remote_device_default_complete_request_handler,
.suspend_handler = scic_sds_remote_device_default_suspend_handler,
.resume_handler = scic_sds_remote_device_default_resume_handler,
.event_handler = scic_sds_remote_device_general_event_handler,
.frame_handler = scic_sds_remote_device_default_frame_handler
},
[SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = {
.stop_handler = scic_sds_remote_device_ready_state_stop_handler,
.fail_handler = scic_sds_remote_device_default_fail_handler,
.destruct_handler = scic_sds_remote_device_default_destruct_handler,
.reset_handler = scic_sds_remote_device_default_reset_handler,
.reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler,
.start_io_handler = scic_sds_smp_remote_device_ready_cmd_substate_start_io_handler,
.complete_io_handler = scic_sds_smp_remote_device_ready_cmd_substate_complete_io_handler,
.continue_io_handler = scic_sds_remote_device_default_continue_request_handler,
.start_task_handler = scic_sds_remote_device_default_start_request_handler,
.complete_task_handler = scic_sds_remote_device_default_complete_request_handler,
.suspend_handler = scic_sds_remote_device_default_suspend_handler,
.resume_handler = scic_sds_remote_device_default_resume_handler,
.event_handler = scic_sds_remote_device_general_event_handler,
.frame_handler = scic_sds_smp_remote_device_ready_cmd_substate_frame_handler
},
[SCI_BASE_REMOTE_DEVICE_STATE_STOPPING] = {
.stop_handler = scic_sds_remote_device_stopping_state_stop_handler,
.fail_handler = scic_sds_remote_device_default_fail_handler,
.destruct_handler = scic_sds_remote_device_default_destruct_handler,
.reset_handler = scic_sds_remote_device_default_reset_handler,
.reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler,
.start_io_handler = scic_sds_remote_device_default_start_request_handler,
.complete_io_handler = scic_sds_remote_device_stopping_state_complete_request_handler,
.continue_io_handler = scic_sds_remote_device_default_continue_request_handler,
.start_task_handler = scic_sds_remote_device_default_start_request_handler,
.complete_task_handler = scic_sds_remote_device_stopping_state_complete_request_handler,
.suspend_handler = scic_sds_remote_device_default_suspend_handler,
.resume_handler = scic_sds_remote_device_default_resume_handler,
.event_handler = scic_sds_remote_device_general_event_handler,
.frame_handler = scic_sds_remote_device_general_frame_handler
},
[SCI_BASE_REMOTE_DEVICE_STATE_FAILED] = {
.stop_handler = scic_sds_remote_device_default_stop_handler,
.fail_handler = scic_sds_remote_device_default_fail_handler,
.destruct_handler = scic_sds_remote_device_default_destruct_handler,
.reset_handler = scic_sds_remote_device_default_reset_handler,
.reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler,
.start_io_handler = scic_sds_remote_device_default_start_request_handler,
.complete_io_handler = scic_sds_remote_device_default_complete_request_handler,
.continue_io_handler = scic_sds_remote_device_default_continue_request_handler,
.start_task_handler = scic_sds_remote_device_default_start_request_handler,
.complete_task_handler = scic_sds_remote_device_default_complete_request_handler,
.suspend_handler = scic_sds_remote_device_default_suspend_handler,
.resume_handler = scic_sds_remote_device_default_resume_handler,
.event_handler = scic_sds_remote_device_default_event_handler,
.frame_handler = scic_sds_remote_device_general_frame_handler
},
[SCI_BASE_REMOTE_DEVICE_STATE_RESETTING] = {
.stop_handler = scic_sds_remote_device_resetting_state_stop_handler,
.fail_handler = scic_sds_remote_device_default_fail_handler,
.destruct_handler = scic_sds_remote_device_default_destruct_handler,
.reset_handler = scic_sds_remote_device_default_reset_handler,
.reset_complete_handler = scic_sds_remote_device_resetting_state_reset_complete_handler,
.start_io_handler = scic_sds_remote_device_default_start_request_handler,
.complete_io_handler = scic_sds_remote_device_resetting_state_complete_request_handler,
.continue_io_handler = scic_sds_remote_device_default_continue_request_handler,
.start_task_handler = scic_sds_remote_device_default_start_request_handler,
.complete_task_handler = scic_sds_remote_device_resetting_state_complete_request_handler,
.suspend_handler = scic_sds_remote_device_default_suspend_handler,
.resume_handler = scic_sds_remote_device_default_resume_handler,
.event_handler = scic_sds_remote_device_default_event_handler,
.frame_handler = scic_sds_remote_device_general_frame_handler
},
[SCI_BASE_REMOTE_DEVICE_STATE_FINAL] = {
.stop_handler = scic_sds_remote_device_default_stop_handler,
.fail_handler = scic_sds_remote_device_default_fail_handler,
.destruct_handler = scic_sds_remote_device_default_destruct_handler,
.reset_handler = scic_sds_remote_device_default_reset_handler,
.reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler,
.start_io_handler = scic_sds_remote_device_default_start_request_handler,
.complete_io_handler = scic_sds_remote_device_default_complete_request_handler,
.continue_io_handler = scic_sds_remote_device_default_continue_request_handler,
.start_task_handler = scic_sds_remote_device_default_start_request_handler,
.complete_task_handler = scic_sds_remote_device_default_complete_request_handler,
.suspend_handler = scic_sds_remote_device_default_suspend_handler,
.resume_handler = scic_sds_remote_device_default_resume_handler,
.event_handler = scic_sds_remote_device_default_event_handler,
.frame_handler = scic_sds_remote_device_default_frame_handler
}
};
static void scic_sds_remote_device_initial_state_enter(void *object)
{
struct scic_sds_remote_device *sci_dev = object;
SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table,
SCI_BASE_REMOTE_DEVICE_STATE_INITIAL);
/* Initial state is a transitional state to the stopped state */
sci_base_state_machine_change_state(&sci_dev->state_machine,
SCI_BASE_REMOTE_DEVICE_STATE_STOPPED);
}
/**
* scic_remote_device_destruct() - free remote node context and destruct
* @remote_device: This parameter specifies the remote device to be destructed.
*
* Remote device objects are a limited resource. As such, they must be
* protected. Thus calls to construct and destruct are mutually exclusive and
* non-reentrant. The return value shall indicate if the device was
* successfully destructed or if some failure occurred. enum sci_status This value
* is returned if the device is successfully destructed.
* SCI_FAILURE_INVALID_REMOTE_DEVICE This value is returned if the supplied
* device isn't valid (e.g. it's already been destoryed, the handle isn't
* valid, etc.).
*/
static enum sci_status scic_remote_device_destruct(struct scic_sds_remote_device *sci_dev)
{
return sci_dev->state_handlers->destruct_handler(sci_dev);
}
/**
* isci_remote_device_deconstruct() - This function frees an isci_remote_device.
* @ihost: This parameter specifies the isci host object.
* @idev: This parameter specifies the remote device to be freed.
*
*/
static void isci_remote_device_deconstruct(struct isci_host *ihost, struct isci_remote_device *idev)
{
dev_dbg(&ihost->pdev->dev,
"%s: isci_device = %p\n", __func__, idev);
/* There should not be any outstanding io's. All paths to
* here should go through isci_remote_device_nuke_requests.
* If we hit this condition, we will need a way to complete
* io requests in process */
while (!list_empty(&idev->reqs_in_process)) {
dev_err(&ihost->pdev->dev,
"%s: ** request list not empty! **\n", __func__);
BUG();
}
scic_remote_device_destruct(&idev->sci);
idev->domain_dev->lldd_dev = NULL;
idev->domain_dev = NULL;
idev->isci_port = NULL;
list_del_init(&idev->node);
clear_bit(IDEV_START_PENDING, &idev->flags);
clear_bit(IDEV_STOP_PENDING, &idev->flags);
wake_up(&ihost->eventq);
}
/**
* isci_remote_device_stop_complete() - This function is called by the scic
* when the remote device stop has completed. We mark the isci device as not
* ready and remove the isci remote device.
* @ihost: This parameter specifies the isci host object.
* @idev: This parameter specifies the remote device.
* @status: This parameter specifies status of the completion.
*
*/
static void isci_remote_device_stop_complete(struct isci_host *ihost,
struct isci_remote_device *idev)
{
dev_dbg(&ihost->pdev->dev, "%s: complete idev = %p\n", __func__, idev);
isci_remote_device_change_state(idev, isci_stopped);
/* after stop, we can tear down resources. */
isci_remote_device_deconstruct(ihost, idev);
}
static void scic_sds_remote_device_stopped_state_enter(void *object)
{
struct scic_sds_remote_device *sci_dev = object;
struct scic_sds_controller *scic;
struct isci_remote_device *idev;
struct isci_host *ihost;
u32 prev_state;
scic = scic_sds_remote_device_get_controller(sci_dev);
ihost = scic->ihost;
idev = sci_dev_to_idev(sci_dev);
SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table,
SCI_BASE_REMOTE_DEVICE_STATE_STOPPED);
/* If we are entering from the stopping state let the SCI User know that
* the stop operation has completed.
*/
prev_state = sci_dev->state_machine.previous_state_id;
if (prev_state == SCI_BASE_REMOTE_DEVICE_STATE_STOPPING)
isci_remote_device_stop_complete(ihost, idev);
scic_sds_controller_remote_device_stopped(scic, sci_dev);
}
static void scic_sds_remote_device_starting_state_enter(void *object)
{
struct scic_sds_remote_device *sci_dev = object;
struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev);
struct isci_host *ihost = scic->ihost;
struct isci_remote_device *idev = sci_dev_to_idev(sci_dev);
SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table,
SCI_BASE_REMOTE_DEVICE_STATE_STARTING);
isci_remote_device_not_ready(ihost, idev,
SCIC_REMOTE_DEVICE_NOT_READY_START_REQUESTED);
}
static void scic_sds_remote_device_ready_state_enter(void *object)
{
struct scic_sds_remote_device *sci_dev = object;
struct scic_sds_controller *scic = sci_dev->owning_port->owning_controller;
struct domain_device *dev = sci_dev_to_domain(sci_dev);
SET_STATE_HANDLER(sci_dev,
scic_sds_remote_device_state_handler_table,
SCI_BASE_REMOTE_DEVICE_STATE_READY);
scic->remote_device_sequence[sci_dev->rnc.remote_node_index]++;
if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_SATA)) {
sci_base_state_machine_change_state(&sci_dev->state_machine,
SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE);
} else if (dev_is_expander(dev)) {
sci_base_state_machine_change_state(&sci_dev->state_machine,
SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE);
} else
isci_remote_device_ready(scic->ihost, sci_dev_to_idev(sci_dev));
}
static void scic_sds_remote_device_ready_state_exit(void *object)
{
struct scic_sds_remote_device *sci_dev = object;
struct domain_device *dev = sci_dev_to_domain(sci_dev);
if (dev->dev_type == SAS_END_DEV) {
struct scic_sds_controller *scic = sci_dev->owning_port->owning_controller;
struct isci_remote_device *idev = sci_dev_to_idev(sci_dev);
isci_remote_device_not_ready(scic->ihost, idev,
SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED);
}
}
static void scic_sds_remote_device_stopping_state_enter(void *object)
{
struct scic_sds_remote_device *sci_dev = object;
SET_STATE_HANDLER(
sci_dev,
scic_sds_remote_device_state_handler_table,
SCI_BASE_REMOTE_DEVICE_STATE_STOPPING
);
}
static void scic_sds_remote_device_failed_state_enter(void *object)
{
struct scic_sds_remote_device *sci_dev = object;
SET_STATE_HANDLER(
sci_dev,
scic_sds_remote_device_state_handler_table,
SCI_BASE_REMOTE_DEVICE_STATE_FAILED
);
}
static void scic_sds_remote_device_resetting_state_enter(void *object)
{
struct scic_sds_remote_device *sci_dev = object;
SET_STATE_HANDLER(
sci_dev,
scic_sds_remote_device_state_handler_table,
SCI_BASE_REMOTE_DEVICE_STATE_RESETTING
);
scic_sds_remote_node_context_suspend(
&sci_dev->rnc, SCI_SOFTWARE_SUSPENSION, NULL, NULL);
}
static void scic_sds_remote_device_resetting_state_exit(void *object)
{
struct scic_sds_remote_device *sci_dev = object;
scic_sds_remote_node_context_resume(&sci_dev->rnc, NULL, NULL);
}
static void scic_sds_remote_device_final_state_enter(void *object)
{
struct scic_sds_remote_device *sci_dev = object;
SET_STATE_HANDLER(
sci_dev,
scic_sds_remote_device_state_handler_table,
SCI_BASE_REMOTE_DEVICE_STATE_FINAL
);
}
static void scic_sds_stp_remote_device_ready_idle_substate_enter(void *object)
{
struct scic_sds_remote_device *sci_dev = object;
SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table,
SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE);
sci_dev->working_request = NULL;
if (scic_sds_remote_node_context_is_ready(&sci_dev->rnc)) {
/*
* Since the RNC is ready, it's alright to finish completion
* processing (e.g. signal the remote device is ready). */
scic_sds_stp_remote_device_ready_idle_substate_resume_complete_handler(sci_dev);
} else {
scic_sds_remote_node_context_resume(&sci_dev->rnc,
scic_sds_stp_remote_device_ready_idle_substate_resume_complete_handler,
sci_dev);
}
}
static void scic_sds_stp_remote_device_ready_cmd_substate_enter(void *object)
{
struct scic_sds_remote_device *sci_dev = object;
struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev);
BUG_ON(sci_dev->working_request == NULL);
SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table,
SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD);
isci_remote_device_not_ready(scic->ihost, sci_dev_to_idev(sci_dev),
SCIC_REMOTE_DEVICE_NOT_READY_SATA_REQUEST_STARTED);
}
static void scic_sds_stp_remote_device_ready_ncq_substate_enter(void *object)
{
struct scic_sds_remote_device *sci_dev = object;
SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table,
SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ);
}
static void scic_sds_stp_remote_device_ready_ncq_error_substate_enter(void *object)
{
struct scic_sds_remote_device *sci_dev = object;
struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev);
struct isci_remote_device *idev = sci_dev_to_idev(sci_dev);
SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table,
SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR);
if (sci_dev->not_ready_reason == SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED)
isci_remote_device_not_ready(scic->ihost, idev,
sci_dev->not_ready_reason);
}
static void scic_sds_stp_remote_device_ready_await_reset_substate_enter(void *object)
{
struct scic_sds_remote_device *sci_dev = object;
SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table,
SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET);
}
static void scic_sds_smp_remote_device_ready_idle_substate_enter(void *object)
{
struct scic_sds_remote_device *sci_dev = object;
struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev);
SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table,
SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE);
isci_remote_device_ready(scic->ihost, sci_dev_to_idev(sci_dev));
}
static void scic_sds_smp_remote_device_ready_cmd_substate_enter(void *object)
{
struct scic_sds_remote_device *sci_dev = object;
struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev);
BUG_ON(sci_dev->working_request == NULL);
SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table,
SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD);
isci_remote_device_not_ready(scic->ihost, sci_dev_to_idev(sci_dev),
SCIC_REMOTE_DEVICE_NOT_READY_SMP_REQUEST_STARTED);
}
static void scic_sds_smp_remote_device_ready_cmd_substate_exit(void *object)
{
struct scic_sds_remote_device *sci_dev = object;
sci_dev->working_request = NULL;
}
static const struct sci_base_state scic_sds_remote_device_state_table[] = {
[SCI_BASE_REMOTE_DEVICE_STATE_INITIAL] = {
.enter_state = scic_sds_remote_device_initial_state_enter,
},
[SCI_BASE_REMOTE_DEVICE_STATE_STOPPED] = {
.enter_state = scic_sds_remote_device_stopped_state_enter,
},
[SCI_BASE_REMOTE_DEVICE_STATE_STARTING] = {
.enter_state = scic_sds_remote_device_starting_state_enter,
},
[SCI_BASE_REMOTE_DEVICE_STATE_READY] = {
.enter_state = scic_sds_remote_device_ready_state_enter,
.exit_state = scic_sds_remote_device_ready_state_exit
},
[SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = {
.enter_state = scic_sds_stp_remote_device_ready_idle_substate_enter,
},
[SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = {
.enter_state = scic_sds_stp_remote_device_ready_cmd_substate_enter,
},
[SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ] = {
.enter_state = scic_sds_stp_remote_device_ready_ncq_substate_enter,
},
[SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR] = {
.enter_state = scic_sds_stp_remote_device_ready_ncq_error_substate_enter,
},
[SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET] = {
.enter_state = scic_sds_stp_remote_device_ready_await_reset_substate_enter,
},
[SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE] = {
.enter_state = scic_sds_smp_remote_device_ready_idle_substate_enter,
},
[SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD] = {
.enter_state = scic_sds_smp_remote_device_ready_cmd_substate_enter,
.exit_state = scic_sds_smp_remote_device_ready_cmd_substate_exit,
},
[SCI_BASE_REMOTE_DEVICE_STATE_STOPPING] = {
.enter_state = scic_sds_remote_device_stopping_state_enter,
},
[SCI_BASE_REMOTE_DEVICE_STATE_FAILED] = {
.enter_state = scic_sds_remote_device_failed_state_enter,
},
[SCI_BASE_REMOTE_DEVICE_STATE_RESETTING] = {
.enter_state = scic_sds_remote_device_resetting_state_enter,
.exit_state = scic_sds_remote_device_resetting_state_exit
},
[SCI_BASE_REMOTE_DEVICE_STATE_FINAL] = {
.enter_state = scic_sds_remote_device_final_state_enter,
},
};
/**
* scic_remote_device_construct() - common construction
* @sci_port: SAS/SATA port through which this device is accessed.
* @sci_dev: remote device to construct
*
* This routine just performs benign initialization and does not
* allocate the remote_node_context which is left to
* scic_remote_device_[de]a_construct(). scic_remote_device_destruct()
* frees the remote_node_context(s) for the device.
*/
static void scic_remote_device_construct(struct scic_sds_port *sci_port,
struct scic_sds_remote_device *sci_dev)
{
sci_dev->owning_port = sci_port;
sci_dev->started_request_count = 0;
sci_base_state_machine_construct(
&sci_dev->state_machine,
sci_dev,
scic_sds_remote_device_state_table,
SCI_BASE_REMOTE_DEVICE_STATE_INITIAL
);
sci_base_state_machine_start(
&sci_dev->state_machine
);
scic_sds_remote_node_context_construct(&sci_dev->rnc,
SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX);
}
/**
* scic_remote_device_da_construct() - construct direct attached device.
*
* The information (e.g. IAF, Signature FIS, etc.) necessary to build
* the device is known to the SCI Core since it is contained in the
* scic_phy object. Remote node context(s) is/are a global resource
* allocated by this routine, freed by scic_remote_device_destruct().
*
* Returns:
* SCI_FAILURE_DEVICE_EXISTS - device has already been constructed.
* SCI_FAILURE_UNSUPPORTED_PROTOCOL - e.g. sas device attached to
* sata-only controller instance.
* SCI_FAILURE_INSUFFICIENT_RESOURCES - remote node contexts exhausted.
*/
static enum sci_status scic_remote_device_da_construct(struct scic_sds_port *sci_port,
struct scic_sds_remote_device *sci_dev)
{
enum sci_status status;
struct domain_device *dev = sci_dev_to_domain(sci_dev);
scic_remote_device_construct(sci_port, sci_dev);
/*
* This information is request to determine how many remote node context
* entries will be needed to store the remote node.
*/
sci_dev->is_direct_attached = true;
status = scic_sds_controller_allocate_remote_node_context(sci_port->owning_controller,
sci_dev,
&sci_dev->rnc.remote_node_index);
if (status != SCI_SUCCESS)
return status;
if (dev->dev_type == SAS_END_DEV || dev->dev_type == SATA_DEV ||
(dev->tproto & SAS_PROTOCOL_STP) || dev_is_expander(dev))
/* pass */;
else
return SCI_FAILURE_UNSUPPORTED_PROTOCOL;
sci_dev->connection_rate = scic_sds_port_get_max_allowed_speed(sci_port);
/* / @todo Should I assign the port width by reading all of the phys on the port? */
sci_dev->device_port_width = 1;
return SCI_SUCCESS;
}
/**
* scic_remote_device_ea_construct() - construct expander attached device
*
* Remote node context(s) is/are a global resource allocated by this
* routine, freed by scic_remote_device_destruct().
*
* Returns:
* SCI_FAILURE_DEVICE_EXISTS - device has already been constructed.
* SCI_FAILURE_UNSUPPORTED_PROTOCOL - e.g. sas device attached to
* sata-only controller instance.
* SCI_FAILURE_INSUFFICIENT_RESOURCES - remote node contexts exhausted.
*/
static enum sci_status scic_remote_device_ea_construct(struct scic_sds_port *sci_port,
struct scic_sds_remote_device *sci_dev)
{
struct domain_device *dev = sci_dev_to_domain(sci_dev);
enum sci_status status;
scic_remote_device_construct(sci_port, sci_dev);
status = scic_sds_controller_allocate_remote_node_context(sci_port->owning_controller,
sci_dev,
&sci_dev->rnc.remote_node_index);
if (status != SCI_SUCCESS)
return status;
if (dev->dev_type == SAS_END_DEV || dev->dev_type == SATA_DEV ||
(dev->tproto & SAS_PROTOCOL_STP) || dev_is_expander(dev))
/* pass */;
else
return SCI_FAILURE_UNSUPPORTED_PROTOCOL;
/*
* For SAS-2 the physical link rate is actually a logical link
* rate that incorporates multiplexing. The SCU doesn't
* incorporate multiplexing and for the purposes of the
* connection the logical link rate is that same as the
* physical. Furthermore, the SAS-2 and SAS-1.1 fields overlay
* one another, so this code works for both situations. */
sci_dev->connection_rate = min_t(u16, scic_sds_port_get_max_allowed_speed(sci_port),
dev->linkrate);
/* / @todo Should I assign the port width by reading all of the phys on the port? */
sci_dev->device_port_width = 1;
return SCI_SUCCESS;
}
/**
* scic_remote_device_start() - This method will start the supplied remote
* device. This method enables normal IO requests to flow through to the
* remote device.
* @remote_device: This parameter specifies the device to be started.
* @timeout: This parameter specifies the number of milliseconds in which the
* start operation should complete.
*
* An indication of whether the device was successfully started. SCI_SUCCESS
* This value is returned if the device was successfully started.
* SCI_FAILURE_INVALID_PHY This value is returned if the user attempts to start
* the device when there have been no phys added to it.
*/
static enum sci_status scic_remote_device_start(struct scic_sds_remote_device *sci_dev,
u32 timeout)
{
struct sci_base_state_machine *sm = &sci_dev->state_machine;
enum scic_sds_remote_device_states state = sm->current_state_id;
enum sci_status status;
if (state != SCI_BASE_REMOTE_DEVICE_STATE_STOPPED) {
dev_warn(scirdev_to_dev(sci_dev), "%s: in wrong state: %d\n",
__func__, state);
return SCI_FAILURE_INVALID_STATE;
}
status = scic_sds_remote_node_context_resume(&sci_dev->rnc,
remote_device_resume_done,
sci_dev);
if (status != SCI_SUCCESS)
return status;
sci_base_state_machine_change_state(sm, SCI_BASE_REMOTE_DEVICE_STATE_STARTING);
return SCI_SUCCESS;
}
static enum sci_status isci_remote_device_construct(struct isci_port *iport,
struct isci_remote_device *idev)
{
struct scic_sds_port *sci_port = iport->sci_port_handle;
struct isci_host *ihost = iport->isci_host;
struct domain_device *dev = idev->domain_dev;
enum sci_status status;
if (dev->parent && dev_is_expander(dev->parent))
status = scic_remote_device_ea_construct(sci_port, &idev->sci);
else
status = scic_remote_device_da_construct(sci_port, &idev->sci);
if (status != SCI_SUCCESS) {
dev_dbg(&ihost->pdev->dev, "%s: construct failed: %d\n",
__func__, status);
return status;
}
/* start the device. */
status = scic_remote_device_start(&idev->sci, ISCI_REMOTE_DEVICE_START_TIMEOUT);
if (status != SCI_SUCCESS)
dev_warn(&ihost->pdev->dev, "remote device start failed: %d\n",
status);
return status;
}
void isci_remote_device_nuke_requests(struct isci_host *ihost, struct isci_remote_device *idev)
{
DECLARE_COMPLETION_ONSTACK(aborted_task_completion);
dev_dbg(&ihost->pdev->dev,
"%s: idev = %p\n", __func__, idev);
/* Cleanup all requests pending for this device. */
isci_terminate_pending_requests(ihost, idev, terminating);
dev_dbg(&ihost->pdev->dev,
"%s: idev = %p, done\n", __func__, idev);
}
/**
* This function builds the isci_remote_device when a libsas dev_found message
* is received.
* @isci_host: This parameter specifies the isci host object.
* @port: This parameter specifies the isci_port conected to this device.
*
* pointer to new isci_remote_device.
*/
static struct isci_remote_device *
isci_remote_device_alloc(struct isci_host *ihost, struct isci_port *iport)
{
struct isci_remote_device *idev;
int i;
for (i = 0; i < SCI_MAX_REMOTE_DEVICES; i++) {
idev = &ihost->devices[i];
if (!test_and_set_bit(IDEV_ALLOCATED, &idev->flags))
break;
}
if (i >= SCI_MAX_REMOTE_DEVICES) {
dev_warn(&ihost->pdev->dev, "%s: failed\n", __func__);
return NULL;
}
if (WARN_ONCE(!list_empty(&idev->reqs_in_process), "found requests in process\n"))
return NULL;
if (WARN_ONCE(!list_empty(&idev->node), "found non-idle remote device\n"))
return NULL;
isci_remote_device_change_state(idev, isci_freed);
return idev;
}
/**
* isci_remote_device_stop() - This function is called internally to stop the
* remote device.
* @isci_host: This parameter specifies the isci host object.
* @isci_device: This parameter specifies the remote device.
*
* The status of the scic request to stop.
*/
enum sci_status isci_remote_device_stop(struct isci_host *ihost, struct isci_remote_device *idev)
{
enum sci_status status;
unsigned long flags;
dev_dbg(&ihost->pdev->dev,
"%s: isci_device = %p\n", __func__, idev);
isci_remote_device_change_state(idev, isci_stopping);
/* Kill all outstanding requests. */
isci_remote_device_nuke_requests(ihost, idev);
set_bit(IDEV_STOP_PENDING, &idev->flags);
spin_lock_irqsave(&ihost->scic_lock, flags);
status = scic_remote_device_stop(&idev->sci, 50);
spin_unlock_irqrestore(&ihost->scic_lock, flags);
/* Wait for the stop complete callback. */
if (status == SCI_SUCCESS) {
wait_for_device_stop(ihost, idev);
clear_bit(IDEV_ALLOCATED, &idev->flags);
}
dev_dbg(&ihost->pdev->dev,
"%s: idev = %p - after completion wait\n",
__func__, idev);
return status;
}
/**
* isci_remote_device_gone() - This function is called by libsas when a domain
* device is removed.
* @domain_device: This parameter specifies the libsas domain device.
*
*/
void isci_remote_device_gone(struct domain_device *dev)
{
struct isci_host *ihost = dev_to_ihost(dev);
struct isci_remote_device *idev = dev->lldd_dev;
dev_dbg(&ihost->pdev->dev,
"%s: domain_device = %p, isci_device = %p, isci_port = %p\n",
__func__, dev, idev, idev->isci_port);
isci_remote_device_stop(ihost, idev);
}
/**
* isci_remote_device_found() - This function is called by libsas when a remote
* device is discovered. A remote device object is created and started. the
* function then sleeps until the sci core device started message is
* received.
* @domain_device: This parameter specifies the libsas domain device.
*
* status, zero indicates success.
*/
int isci_remote_device_found(struct domain_device *domain_dev)
{
struct isci_host *isci_host = dev_to_ihost(domain_dev);
struct isci_port *isci_port;
struct isci_phy *isci_phy;
struct asd_sas_port *sas_port;
struct asd_sas_phy *sas_phy;
struct isci_remote_device *isci_device;
enum sci_status status;
dev_dbg(&isci_host->pdev->dev,
"%s: domain_device = %p\n", __func__, domain_dev);
wait_for_start(isci_host);
sas_port = domain_dev->port;
sas_phy = list_first_entry(&sas_port->phy_list, struct asd_sas_phy,
port_phy_el);
isci_phy = to_isci_phy(sas_phy);
isci_port = isci_phy->isci_port;
/* we are being called for a device on this port,
* so it has to come up eventually
*/
wait_for_completion(&isci_port->start_complete);
if ((isci_stopping == isci_port_get_state(isci_port)) ||
(isci_stopped == isci_port_get_state(isci_port)))
return -ENODEV;
isci_device = isci_remote_device_alloc(isci_host, isci_port);
if (!isci_device)
return -ENODEV;
INIT_LIST_HEAD(&isci_device->node);
domain_dev->lldd_dev = isci_device;
isci_device->domain_dev = domain_dev;
isci_device->isci_port = isci_port;
isci_remote_device_change_state(isci_device, isci_starting);
spin_lock_irq(&isci_host->scic_lock);
list_add_tail(&isci_device->node, &isci_port->remote_dev_list);
set_bit(IDEV_START_PENDING, &isci_device->flags);
status = isci_remote_device_construct(isci_port, isci_device);
spin_unlock_irq(&isci_host->scic_lock);
dev_dbg(&isci_host->pdev->dev,
"%s: isci_device = %p\n",
__func__, isci_device);
if (status != SCI_SUCCESS) {
spin_lock_irq(&isci_host->scic_lock);
isci_remote_device_deconstruct(
isci_host,
isci_device
);
spin_unlock_irq(&isci_host->scic_lock);
return -ENODEV;
}
/* wait for the device ready callback. */
wait_for_device_start(isci_host, isci_device);
return 0;
}
/**
* isci_device_is_reset_pending() - This function will check if there is any
* pending reset condition on the device.
* @request: This parameter is the isci_device object.
*
* true if there is a reset pending for the device.
*/
bool isci_device_is_reset_pending(
struct isci_host *isci_host,
struct isci_remote_device *isci_device)
{
struct isci_request *isci_request;
struct isci_request *tmp_req;
bool reset_is_pending = false;
unsigned long flags;
dev_dbg(&isci_host->pdev->dev,
"%s: isci_device = %p\n", __func__, isci_device);
spin_lock_irqsave(&isci_host->scic_lock, flags);
/* Check for reset on all pending requests. */
list_for_each_entry_safe(isci_request, tmp_req,
&isci_device->reqs_in_process, dev_node) {
dev_dbg(&isci_host->pdev->dev,
"%s: isci_device = %p request = %p\n",
__func__, isci_device, isci_request);
if (isci_request->ttype == io_task) {
struct sas_task *task = isci_request_access_task(
isci_request);
spin_lock(&task->task_state_lock);
if (task->task_state_flags & SAS_TASK_NEED_DEV_RESET)
reset_is_pending = true;
spin_unlock(&task->task_state_lock);
}
}
spin_unlock_irqrestore(&isci_host->scic_lock, flags);
dev_dbg(&isci_host->pdev->dev,
"%s: isci_device = %p reset_is_pending = %d\n",
__func__, isci_device, reset_is_pending);
return reset_is_pending;
}
/**
* isci_device_clear_reset_pending() - This function will clear if any pending
* reset condition flags on the device.
* @request: This parameter is the isci_device object.
*
* true if there is a reset pending for the device.
*/
void isci_device_clear_reset_pending(struct isci_host *ihost, struct isci_remote_device *idev)
{
struct isci_request *isci_request;
struct isci_request *tmp_req;
unsigned long flags = 0;
dev_dbg(&ihost->pdev->dev, "%s: idev=%p, ihost=%p\n",
__func__, idev, ihost);
spin_lock_irqsave(&ihost->scic_lock, flags);
/* Clear reset pending on all pending requests. */
list_for_each_entry_safe(isci_request, tmp_req,
&idev->reqs_in_process, dev_node) {
dev_dbg(&ihost->pdev->dev, "%s: idev = %p request = %p\n",
__func__, idev, isci_request);
if (isci_request->ttype == io_task) {
unsigned long flags2;
struct sas_task *task = isci_request_access_task(
isci_request);
spin_lock_irqsave(&task->task_state_lock, flags2);
task->task_state_flags &= ~SAS_TASK_NEED_DEV_RESET;
spin_unlock_irqrestore(&task->task_state_lock, flags2);
}
}
spin_unlock_irqrestore(&ihost->scic_lock, flags);
}
