#
# PCCARD (PCMCIA/CardBus) bus subsystem configuration
#
menu "PCCARD (PCMCIA/CardBus) support"
config PCCARD
tristate "PCCard (PCMCIA/CardBus) support"
select HOTPLUG
---help---
Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
computer. These are credit-card size devices such as network cards,
modems or hard drives often used with laptops computers. There are
actually two varieties of these cards: 16 bit PCMCIA and 32 bit
CardBus cards.
To compile this driver as modules, choose M here: the
module will be called pcmcia_core.
if PCCARD
config PCMCIA_DEBUG
bool "Enable PCCARD debugging"
help
Say Y here to enable PCMCIA subsystem debugging. You
will need to choose the debugging level either via the
kernel command line, or module options depending whether
you build the PCMCIA as modules.
The kernel command line options are:
pcmcia_core.pc_debug=N
pcmcia.pc_debug=N
sa11xx_core.pc_debug=N
The module option is called pc_debug=N
In all the above examples, N is the debugging verbosity
level.
config PCMCIA
tristate "16-bit PCMCIA support"
select CRC32
default y
---help---
This option enables support for 16-bit PCMCIA cards. Most older
PC-cards are such 16-bit PCMCIA cards, so unless you know you're
only using 32-bit CardBus cards, say Y or M here.
To use 16-bit PCMCIA cards, you will need supporting software in
most cases. (see the file <file:Documentation/Changes> for
location and details).
To compile this driver as modules, choose M here: the
module will be called pcmcia.
If unsure, say Y.
config PCMCIA_LOAD_CIS
bool "Load CIS updates from userspace (EXPERIMENTAL)"
depends on PCMCIA && EXPERIMENTAL
select FW_LOADER
default y
help
Some PCMCIA cards require an updated Card Information Structure (CIS)
to be loaded from userspace to work correctly. If you say Y here,
and your userspace is arranged correctly, this will be loaded
automatically using the in-kernel firmware loader and the hotplug
subsystem, instead of relying on cardmgr from pcmcia-cs to do so.
If unsure, say Y.
config PCMCIA_IOCTL
bool "PCMCIA control ioctl (obsolete)"
depends on PCMCIA
default y
help
If you say Y here, the deprecated ioctl interface to the PCMCIA
subsystem will be built. It is needed by cardmgr and cardctl
(pcmcia-cs) to function properly.
You should use the new pcmciautils package instead (see
<file:Documentation/Changes> for location and details).
If unsure, say Y.
config CARDBUS
bool "32-bit CardBus support"
depends on PCI
default y
---help---
CardBus is a bus mastering architecture for PC-cards, which allows
for 32 bit PC-cards (the original PCMCIA standard specifies only
a 16 bit wide bus). Many newer PC-cards are actually CardBus cards.
To use 32 bit PC-cards, you also need a CardBus compatible host
bridge. Virtually all modern PCMCIA bridges do this, and most of
them are "yenta-compatible", so say Y or M there, too.
If unsure, say Y.
comment "PC-card bridges"
config YENTA
tristate "CardBus yenta-compatible bridge support"
depends on PCI
select CARDBUS if !EMBEDDED
select PCCARD_NONSTATIC
---help---
This option enables support for CardBus host bridges. Virtually
all modern PCMCIA bridges are CardBus compatible. A "bridge" is
the hardware inside your computer that PCMCIA cards are plugged
into.
To compile this driver as modules, choose M here: the
module will be called yenta_socket.
If unsure, say Y.
config PD6729
tristate "Cirrus PD6729 compatible bridge support"
depends on PCMCIA && PCI
select PCCARD_NONSTATIC
help
This provides support for the Cirrus PD6729 PCI-to-PCMCIA bridge
device, found in some older laptops and PCMCIA card readers.
config I82092
tristate "i82092 compatible bridge support"
depends on PCMCIA && PCI
select PCCARD_NONSTATIC
help
This provides support for the Intel I82092AA PCI-to-PCMCIA bridge device,
found in some older laptops and more commonly in evaluation boards for the
chip.
config I82365
tristate "i82365 compatible bridge support"
depends on PCMCIA && ISA
select PCCARD_NONSTATIC
help
Say Y here to include support for ISA-bus PCMCIA host bridges that
are register compatible with the Intel i82365. These are found on
older laptops and ISA-bus card readers for desktop systems. A
"bridge" is the hardware inside your computer that PCMCIA cards are
plugged into. If unsure, say N.
config TCIC
tristate "Databook TCIC host bridge support"
depends on PCMCIA && ISA
select PCCARD_NONSTATIC
help
Say Y here to include support for the Databook TCIC family of PCMCIA
host bridges. These are only found on a handful of old systems.
"Bridge" is the name used for the hardware inside your computer that
PCMCIA cards are plugged into. If unsure, say N.
config HD64465_PCMCIA
tristate "HD64465 host bridge support"
depends on HD64465 && PCMCIA
config PCMCIA_AU1X00
tristate "Au1x00 pcmcia support"
depends on SOC_AU1X00 && PCMCIA
config PCMCIA_SA1100
tristate "SA1100 support"
depends on ARM && ARCH_SA1100 && PCMCIA
help
Say Y here to include support for SA11x0-based PCMCIA or CF
sockets, found on HP iPAQs, Yopy, and other StrongARM(R)/
Xscale(R) embedded machines.
This driver is also available as a module called sa1100_cs.
config PCMCIA_SA1111
tristate "SA1111 support"
depends on ARM && ARCH_SA1100 && SA1111 && PCMCIA
help
Say Y here to include support for SA1111-based PCMCIA or CF
sockets, found on the Jornada 720, Graphicsmaster and other
StrongARM(R)/Xscale(R) embedded machines.
This driver is also available as a module called sa1111_cs.
config PCMCIA_PXA2XX
tristate "PXA2xx support"
depends on ARM && ARCH_PXA && PCMCIA
help
Say Y here to include support for the PXA2xx PCMCIA controller
config PCMCIA_PROBE
bool
default y if ISA && !ARCH_SA1100 && !ARCH_CLPS711X
config M32R_PCC
bool "M32R PCMCIA I/F"
depends on M32R && CHIP_M32700 && PCMCIA
select PCCARD_NONSTATIC
help
Say Y here to use the M32R PCMCIA controller.
config M32R_CFC
bool "M32R CF I/F Controller"
depends on M32R && (PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_MAPPI3 || PLAT_OPSPUT)
select PCCARD_NONSTATIC
help
Say Y here to use the M32R CompactFlash controller.
config M32R_CFC_NUM
int "M32R CF I/F number"
depends on M32R_CFC
default "1" if PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_MAPPI3 || PLAT_OPSPUT
help
Set the number of M32R CF slots.
config PCMCIA_VRC4171
tristate "NEC VRC4171 Card Controllers support"
depends on VRC4171 && PCMCIA
config PCMCIA_VRC4173
tristate "NEC VRC4173 CARDU support"
depends on CPU_VR41XX && PCI && PCMCIA
config OMAP_CF
tristate "OMAP CompactFlash Controller"
depends on PCMCIA && ARCH_OMAP16XX
help
Say Y here to support the CompactFlash controller on OMAP.
Note that this doesn't support "True IDE" mode.
config PCCARD_NONSTATIC
tristate
endif # PCCARD
endmenu
