/*
* This file is part of wl1251
*
* Copyright (c) 1998-2007 Texas Instruments Incorporated
* Copyright (C) 2008 Nokia Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*
*/
#ifndef __WL1251_TX_H__
#define __WL1251_TX_H__
#include <linux/bitops.h>
#include "acx.h"
/*
*
* TX PATH
*
* The Tx path uses a double buffer and a tx_control structure, each located
* at a fixed address in the device's memory. On startup, the host retrieves
* the pointers to these addresses. A double buffer allows for continuous data
* flow towards the device. The host keeps track of which buffer is available
* and alternates between these two buffers on a per packet basis.
*
* The size of each of the two buffers is large enough to hold the longest
* 802.3 packet - maximum size Ethernet packet + header + descriptor.
* TX complete indication will be received a-synchronously in a TX done cyclic
* buffer which is composed of 16 tx_result descriptors structures and is used
* in a cyclic manner.
*
* The TX (HOST) procedure is as follows:
* 1. Read the Tx path status, that will give the data_out_count.
* 2. goto 1, if not possible.
* i.e. if data_in_count - data_out_count >= HwBuffer size (2 for double
* buffer).
* 3. Copy the packet (preceded by double_buffer_desc), if possible.
* i.e. if data_in_count - data_out_count < HwBuffer size (2 for double
* buffer).
* 4. increment data_in_count.
* 5. Inform the firmware by generating a firmware internal interrupt.
* 6. FW will increment data_out_count after it reads the buffer.
*
* The TX Complete procedure:
* 1. To get a TX complete indication the host enables the tx_complete flag in
* the TX descriptor Structure.
* 2. For each packet with a Tx Complete field set, the firmware adds the
* transmit results to the cyclic buffer (txDoneRing) and sets both done_1
* and done_2 to 1 to indicate driver ownership.
* 3. The firmware sends a Tx Complete interrupt to the host to trigger the
* host to process the new data. Note: interrupt will be send per packet if
* TX complete indication was requested in tx_control or per crossing
* aggregation threshold.
* 4. After receiving the Tx Complete interrupt, the host reads the
* TxDescriptorDone information in a cyclic manner and clears both done_1
* and done_2 fields.
*
*/
#define TX_COMPLETE_REQUIRED_BIT 0x80
#define TX_STATUS_DATA_OUT_COUNT_MASK 0xf
#define WL1251_TX_ALIGN_TO 4
#define WL1251_TX_ALIGN(len) (((len) + WL1251_TX_ALIGN_TO - 1) & \
~(WL1251_TX_ALIGN_TO - 1))
#define WL1251_TKIP_IV_SPACE 4
struct tx_control {
/* Rate Policy (class) index */
unsigned rate_policy:3;
/* When set, no ack policy is expected */
unsigned ack_policy:1;
/*
* Packet type:
* 0 -> 802.11
* 1 -> 802.3
* 2 -> IP
* 3 -> raw codec
*/
unsigned packet_type:2;
/* If set, this is a QoS-Null or QoS-Data frame */
unsigned qos:1;
/*
* If set, the target triggers the tx complete INT
* upon frame sending completion.
*/
unsigned tx_complete:1;
/* 2 bytes padding before packet header */
unsigned xfer_pad:1;
unsigned reserved:7;
} __packed;
struct tx_double_buffer_desc {
/* Length of payload, including headers. */
__le16 length;
/*
* A bit mask that specifies the initial rate to be used
* Possible values are:
* 0x0001 - 1Mbits
* 0x0002 - 2Mbits
* 0x0004 - 5.5Mbits
* 0x0008 - 6Mbits
* 0x0010 - 9Mbits
* 0x0020 - 11Mbits
* 0x0040 - 12Mbits
* 0x0080 - 18Mbits
* 0x0100 - 22Mbits
* 0x0200 - 24Mbits
* 0x0400 - 36Mbits
* 0x0800 - 48Mbits
* 0x1000 - 54Mbits
*/
__le16 rate;
/* Time in us that a packet can spend in the target */
__le32 expiry_time;
/* index of the TX queue used for this packet */
u8 xmit_queue;
/* Used to identify a packet */
u8 id;
struct tx_control control;
/*
* The FW should cut the packet into fragments
* of this size.
*/
__le16 frag_threshold;
/* Numbers of HW queue blocks to be allocated */
u8 num_mem_blocks;
u8 reserved;
} __packed;
enum {
TX_SUCCESS = 0,
TX_DMA_ERROR = BIT(7),
TX_DISABLED = BIT(6),
TX_RETRY_EXCEEDED = BIT(5),
TX_TIMEOUT = BIT(4),
TX_KEY_NOT_FOUND = BIT(3),
TX_ENCRYPT_FAIL = BIT(2),
TX_UNAVAILABLE_PRIORITY = BIT(1),
};
struct tx_result {
/*
* Ownership synchronization between the host and
* the firmware. If done_1 and done_2 are cleared,
* owned by the FW (no info ready).
*/
u8 done_1;
/* same as double_buffer_desc->id */
u8 id;
/*
* Total air access duration consumed by this
* packet, including all retries and overheads.
*/
u16 medium_usage;
/* Total media delay (from 1st EDCA AIFS counter until TX Complete). */
u32 medium_delay;
/* Time between host xfer and tx complete */
u32 fw_hnadling_time;
/* The LS-byte of the last TKIP sequence number. */
u8 lsb_seq_num;
/* Retry count */
u8 ack_failures;
/* At which rate we got a ACK */
u16 rate;
u16 reserved;
/* TX_* */
u8 status;
/* See done_1 */
u8 done_2;
} __packed;
static inline int wl1251_tx_get_queue(int queue)
{
switch (queue) {
case 0:
return QOS_AC_VO;
case 1:
return QOS_AC_VI;
case 2:
return QOS_AC_BE;
case 3:
return QOS_AC_BK;
default:
return QOS_AC_BE;
}
}
void wl1251_tx_work(struct work_struct *work);
void wl1251_tx_complete(struct wl1251 *wl);
void wl1251_tx_flush(struct wl1251 *wl);
#endif
