/*
Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
Copyright (C) 2004 - 2009 Gertjan van Wingerde <gwingerde@gmail.com>
<http://rt2x00.serialmonkey.com>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the
Free Software Foundation, Inc.,
59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
/*
Module: rt2x00
Abstract: rt2x00 global information.
*/
#ifndef RT2X00_H
#define RT2X00_H
#include <linux/bitops.h>
#include <linux/skbuff.h>
#include <linux/workqueue.h>
#include <linux/firmware.h>
#include <linux/leds.h>
#include <linux/mutex.h>
#include <linux/etherdevice.h>
#include <linux/input-polldev.h>
#include <net/mac80211.h>
#include "rt2x00debug.h"
#include "rt2x00leds.h"
#include "rt2x00reg.h"
#include "rt2x00queue.h"
/*
* Module information.
*/
#define DRV_VERSION "2.3.0"
#define DRV_PROJECT "http://rt2x00.serialmonkey.com"
/*
* Debug definitions.
* Debug output has to be enabled during compile time.
*/
#define DEBUG_PRINTK_MSG(__dev, __kernlvl, __lvl, __msg, __args...) \
printk(__kernlvl "%s -> %s: %s - " __msg, \
wiphy_name((__dev)->hw->wiphy), __func__, __lvl, ##__args)
#define DEBUG_PRINTK_PROBE(__kernlvl, __lvl, __msg, __args...) \
printk(__kernlvl "%s -> %s: %s - " __msg, \
KBUILD_MODNAME, __func__, __lvl, ##__args)
#ifdef CONFIG_RT2X00_DEBUG
#define DEBUG_PRINTK(__dev, __kernlvl, __lvl, __msg, __args...) \
DEBUG_PRINTK_MSG(__dev, __kernlvl, __lvl, __msg, ##__args);
#else
#define DEBUG_PRINTK(__dev, __kernlvl, __lvl, __msg, __args...) \
do { } while (0)
#endif /* CONFIG_RT2X00_DEBUG */
/*
* Various debug levels.
* The debug levels PANIC and ERROR both indicate serious problems,
* for this reason they should never be ignored.
* The special ERROR_PROBE message is for messages that are generated
* when the rt2x00_dev is not yet initialized.
*/
#define PANIC(__dev, __msg, __args...) \
DEBUG_PRINTK_MSG(__dev, KERN_CRIT, "Panic", __msg, ##__args)
#define ERROR(__dev, __msg, __args...) \
DEBUG_PRINTK_MSG(__dev, KERN_ERR, "Error", __msg, ##__args)
#define ERROR_PROBE(__msg, __args...) \
DEBUG_PRINTK_PROBE(KERN_ERR, "Error", __msg, ##__args)
#define WARNING(__dev, __msg, __args...) \
DEBUG_PRINTK(__dev, KERN_WARNING, "Warning", __msg, ##__args)
#define NOTICE(__dev, __msg, __args...) \
DEBUG_PRINTK(__dev, KERN_NOTICE, "Notice", __msg, ##__args)
#define INFO(__dev, __msg, __args...) \
DEBUG_PRINTK(__dev, KERN_INFO, "Info", __msg, ##__args)
#define DEBUG(__dev, __msg, __args...) \
DEBUG_PRINTK(__dev, KERN_DEBUG, "Debug", __msg, ##__args)
#define EEPROM(__dev, __msg, __args...) \
DEBUG_PRINTK(__dev, KERN_DEBUG, "EEPROM recovery", __msg, ##__args)
/*
* Duration calculations
* The rate variable passed is: 100kbs.
* To convert from bytes to bits we multiply size with 8,
* then the size is multiplied with 10 to make the
* real rate -> rate argument correction.
*/
#define GET_DURATION(__size, __rate) (((__size) * 8 * 10) / (__rate))
#define GET_DURATION_RES(__size, __rate)(((__size) * 8 * 10) % (__rate))
/*
* Determine the number of L2 padding bytes required between the header and
* the payload.
*/
#define L2PAD_SIZE(__hdrlen) (-(__hdrlen) & 3)
/*
* Determine the alignment requirement,
* to make sure the 802.11 payload is padded to a 4-byte boundrary
* we must determine the address of the payload and calculate the
* amount of bytes needed to move the data.
*/
#define ALIGN_SIZE(__skb, __header) \
( ((unsigned long)((__skb)->data + (__header))) & 3 )
/*
* Constants for extra TX headroom for alignment purposes.
*/
#define RT2X00_ALIGN_SIZE 4 /* Only whole frame needs alignment */
#define RT2X00_L2PAD_SIZE 8 /* Both header & payload need alignment */
/*
* Standard timing and size defines.
* These values should follow the ieee80211 specifications.
*/
#define ACK_SIZE 14
#define IEEE80211_HEADER 24
#define PLCP 48
#define BEACON 100
#define PREAMBLE 144
#define SHORT_PREAMBLE 72
#define SLOT_TIME 20
#define SHORT_SLOT_TIME 9
#define SIFS 10
#define PIFS ( SIFS + SLOT_TIME )
#define SHORT_PIFS ( SIFS + SHORT_SLOT_TIME )
#define DIFS ( PIFS + SLOT_TIME )
#define SHORT_DIFS ( SHORT_PIFS + SHORT_SLOT_TIME )
#define EIFS ( SIFS + DIFS + \
GET_DURATION(IEEE80211_HEADER + ACK_SIZE, 10) )
#define SHORT_EIFS ( SIFS + SHORT_DIFS + \
GET_DURATION(IEEE80211_HEADER + ACK_SIZE, 10) )
/*
* Structure for average calculation
* The avg field contains the actual average value,
* but avg_weight is internally used during calculations
* to prevent rounding errors.
*/
struct avg_val {
int avg;
int avg_weight;
};
enum rt2x00_chip_intf {
RT2X00_CHIP_INTF_PCI,
RT2X00_CHIP_INTF_USB,
RT2X00_CHIP_INTF_SOC,
};
/*
* Chipset identification
* The chipset on the device is composed of a RT and RF chip.
* The chipset combination is important for determining device capabilities.
*/
struct rt2x00_chip {
u16 rt;
#define RT2460 0x2460
#define RT2560 0x2560
#define RT2570 0x2570
#define RT2661 0x2661
#define RT2573 0x2573
#define RT2860 0x2860 /* 2.4GHz PCI/CB */
#define RT2870 0x2870
#define RT2872 0x2872
#define RT2880 0x2880 /* WSOC */
#define RT2883 0x2883 /* WSOC */
#define RT2890 0x2890 /* 2.4GHz PCIe */
#define RT3052 0x3052 /* WSOC */
#define RT3070 0x3070
#define RT3071 0x3071
#define RT3090 0x3090 /* 2.4GHz PCIe */
#define RT3390 0x3390
#define RT3572 0x3572
u16 rf;
u16 rev;
enum rt2x00_chip_intf intf;
};
/*
* RF register values that belong to a particular channel.
*/
struct rf_channel {
int channel;
u32 rf1;
u32 rf2;
u32 rf3;
u32 rf4;
};
/*
* Channel information structure
*/
struct channel_info {
unsigned int flags;
#define GEOGRAPHY_ALLOWED 0x00000001
short tx_power1;
short tx_power2;
};
/*
* Antenna setup values.
*/
struct antenna_setup {
enum antenna rx;
enum antenna tx;
};
/*
* Quality statistics about the currently active link.
*/
struct link_qual {
/*
* Statistics required for Link tuning by driver
* The rssi value is provided by rt2x00lib during the
* link_tuner() callback function.
* The false_cca field is filled during the link_stats()
* callback function and could be used during the
* link_tuner() callback function.
*/
int rssi;
int false_cca;
/*
* VGC levels
* Hardware driver will tune the VGC level during each call
* to the link_tuner() callback function. This vgc_level is
* is determined based on the link quality statistics like
* average RSSI and the false CCA count.
*
* In some cases the drivers need to differentiate between
* the currently "desired" VGC level and the level configured
* in the hardware. The latter is important to reduce the
* number of BBP register reads to reduce register access
* overhead. For this reason we store both values here.
*/
u8 vgc_level;
u8 vgc_level_reg;
/*
* Statistics required for Signal quality calculation.
* These fields might be changed during the link_stats()
* callback function.
*/
int rx_success;
int rx_failed;
int tx_success;
int tx_failed;
};
/*
* Antenna settings about the currently active link.
*/
struct link_ant {
/*
* Antenna flags
*/
unsigned int flags;
#define ANTENNA_RX_DIVERSITY 0x00000001
#define ANTENNA_TX_DIVERSITY 0x00000002
#define ANTENNA_MODE_SAMPLE 0x00000004
/*
* Currently active TX/RX antenna setup.
* When software diversity is used, this will indicate
* which antenna is actually used at this time.
*/
struct antenna_setup active;
/*
* RSSI history information for the antenna.
* Used to determine when to switch antenna
* when using software diversity.
*/
int rssi_history;
/*
* Current RSSI average of the currently active antenna.
* Similar to the avg_rssi in the link_qual structure
* this value is updated by using the walking average.
*/
struct avg_val rssi_ant;
};
/*
* To optimize the quality of the link we need to store
* the quality of received frames and periodically
* optimize the link.
*/
struct link {
/*
* Link tuner counter
* The number of times the link has been tuned
* since the radio has been switched on.
*/
u32 count;
/*
* Quality measurement values.
*/
struct link_qual qual;
/*
* TX/RX antenna setup.
*/
struct link_ant ant;
/*
* Currently active average RSSI value
*/
struct avg_val avg_rssi;
/*
* Work structure for scheduling periodic link tuning.
*/
struct delayed_work work;
};
/*
* Interface structure
* Per interface configuration details, this structure
* is allocated as the private data for ieee80211_vif.
*/
struct rt2x00_intf {
/*
* All fields within the rt2x00_intf structure
* must be protected with a spinlock.
*/
spinlock_t lock;
/*
* MAC of the device.
*/
u8 mac[ETH_ALEN];
/*
* BBSID of the AP to associate with.
*/
u8 bssid[ETH_ALEN];
/*
* beacon->skb must be protected with the mutex.
*/
struct mutex beacon_skb_mutex;
/*
* Entry in the beacon queue which belongs to
* this interface. Each interface has its own
* dedicated beacon entry.
*/
struct queue_entry *beacon;
/*
* Actions that needed rescheduling.
*/
unsigned int delayed_flags;
#define DELAYED_UPDATE_BEACON 0x00000001
/*
* Software sequence counter, this is only required
* for hardware which doesn't support hardware
* sequence counting.
*/
spinlock_t seqlock;
u16 seqno;
};
static inline struct rt2x00_intf* vif_to_intf(struct ieee80211_vif *vif)
{
return (struct rt2x00_intf *)vif->drv_priv;
}
/**
* struct hw_mode_spec: Hardware specifications structure
*
* Details about the supported modes, rates and channels
* of a particular chipset. This is used by rt2x00lib
* to build the ieee80211_hw_mode array for mac80211.
*
* @supported_bands: Bitmask contained the supported bands (2.4GHz, 5.2GHz).
* @supported_rates: Rate types which are supported (CCK, OFDM).
* @num_channels: Number of supported channels. This is used as array size
* for @tx_power_a, @tx_power_bg and @channels.
* @channels: Device/chipset specific channel values (See &struct rf_channel).
* @channels_info: Additional information for channels (See &struct channel_info).
* @ht: Driver HT Capabilities (See &ieee80211_sta_ht_cap).
*/
struct hw_mode_spec {
unsigned int supported_bands;
#define SUPPORT_BAND_2GHZ 0x00000001
#define SUPPORT_BAND_5GHZ 0x00000002
unsigned int supported_rates;
#define SUPPORT_RATE_CCK 0x00000001
#define SUPPORT_RATE_OFDM 0x00000002
unsigned int num_channels;
const struct rf_channel *channels;
const struct channel_info *channels_info;
struct ieee80211_sta_ht_cap ht;
};
/*
* Configuration structure wrapper around the
* mac80211 configuration structure.
* When mac80211 configures the driver, rt2x00lib
* can precalculate values which are equal for all
* rt2x00 drivers. Those values can be stored in here.
*/
struct rt2x00lib_conf {
struct ieee80211_conf *conf;
struct rf_channel rf;
struct channel_info channel;
};
/*
* Configuration structure for erp settings.
*/
struct rt2x00lib_erp {
int short_preamble;
int cts_protection;
u32 basic_rates;
int slot_time;
short sifs;
short pifs;
short difs;
short eifs;
u16 beacon_int;
};
/*
* Configuration structure for hardware encryption.
*/
struct rt2x00lib_crypto {
enum cipher cipher;
enum set_key_cmd cmd;
const u8 *address;
u32 bssidx;
u32 aid;
u8 key[16];
u8 tx_mic[8];
u8 rx_mic[8];
};
/*
* Configuration structure wrapper around the
* rt2x00 interface configuration handler.
*/
struct rt2x00intf_conf {
/*
* Interface type
*/
enum nl80211_iftype type;
/*
* TSF sync value, this is dependant on the operation type.
*/
enum tsf_sync sync;
/*
* The MAC and BSSID addressess are simple array of bytes,
* these arrays are little endian, so when sending the addressess
* to the drivers, copy the it into a endian-signed variable.
*
* Note that all devices (except rt2500usb) have 32 bits
* register word sizes. This means that whatever variable we
* pass _must_ be a multiple of 32 bits. Otherwise the device
* might not accept what we are sending to it.
* This will also make it easier for the driver to write
* the data to the device.
*/
__le32 mac[2];
__le32 bssid[2];
};
/*
* rt2x00lib callback functions.
*/
struct rt2x00lib_ops {
/*
* Interrupt handlers.
*/
irq_handler_t irq_handler;
/*
* Device init handlers.
*/
int (*probe_hw) (struct rt2x00_dev *rt2x00dev);
char *(*get_firmware_name) (struct rt2x00_dev *rt2x00dev);
int (*check_firmware) (struct rt2x00_dev *rt2x00dev,
const u8 *data, const size_t len);
int (*load_firmware) (struct rt2x00_dev *rt2x00dev,
const u8 *data, const size_t len);
/*
* Device initialization/deinitialization handlers.
*/
int (*initialize) (struct rt2x00_dev *rt2x00dev);
void (*uninitialize) (struct rt2x00_dev *rt2x00dev);
/*
* queue initialization handlers
*/
bool (*get_entry_state) (struct queue_entry *entry);
void (*clear_entry) (struct queue_entry *entry);
/*
* Radio control handlers.
*/
int (*set_device_state) (struct rt2x00_dev *rt2x00dev,
enum dev_state state);
int (*rfkill_poll) (struct rt2x00_dev *rt2x00dev);
void (*link_stats) (struct rt2x00_dev *rt2x00dev,
struct link_qual *qual);
void (*reset_tuner) (struct rt2x00_dev *rt2x00dev,
struct link_qual *qual);
void (*link_tuner) (struct rt2x00_dev *rt2x00dev,
struct link_qual *qual, const u32 count);
/*
* TX control handlers
*/
void (*write_tx_desc) (struct rt2x00_dev *rt2x00dev,
struct sk_buff *skb,
struct txentry_desc *txdesc);
int (*write_tx_data) (struct queue_entry *entry);
void (*write_beacon) (struct queue_entry *entry);
int (*get_tx_data_len) (struct queue_entry *entry);
void (*kick_tx_queue) (struct rt2x00_dev *rt2x00dev,
const enum data_queue_qid queue);
void (*kill_tx_queue) (struct rt2x00_dev *rt2x00dev,
const enum data_queue_qid queue);
/*
* RX control handlers
*/
void (*fill_rxdone) (struct queue_entry *entry,
struct rxdone_entry_desc *rxdesc);
/*
* Configuration handlers.
*/
int (*config_shared_key) (struct rt2x00_dev *rt2x00dev,
struct rt2x00lib_crypto *crypto,
struct ieee80211_key_conf *key);
int (*config_pairwise_key) (struct rt2x00_dev *rt2x00dev,
struct rt2x00lib_crypto *crypto,
struct ieee80211_key_conf *key);
void (*config_filter) (struct rt2x00_dev *rt2x00dev,
const unsigned int filter_flags);
void (*config_intf) (struct rt2x00_dev *rt2x00dev,
struct rt2x00_intf *intf,
struct rt2x00intf_conf *conf,
const unsigned int flags);
#define CONFIG_UPDATE_TYPE ( 1 << 1 )
#define CONFIG_UPDATE_MAC ( 1 << 2 )
#define CONFIG_UPDATE_BSSID ( 1 << 3 )
void (*config_erp) (struct rt2x00_dev *rt2x00dev,
struct rt2x00lib_erp *erp);
void (*config_ant) (struct rt2x00_dev *rt2x00dev,
struct antenna_setup *ant);
void (*config) (struct rt2x00_dev *rt2x00dev,
struct rt2x00lib_conf *libconf,
const unsigned int changed_flags);
};
/*
* rt2x00 driver callback operation structure.
*/
struct rt2x00_ops {
const char *name;
const unsigned int max_sta_intf;
const unsigned int max_ap_intf;
const unsigned int eeprom_size;
const unsigned int rf_size;
const unsigned int tx_queues;
const unsigned int extra_tx_headroom;
const struct data_queue_desc *rx;
const struct data_queue_desc *tx;
const struct data_queue_desc *bcn;
const struct data_queue_desc *atim;
const struct rt2x00lib_ops *lib;
const struct ieee80211_ops *hw;
#ifdef CONFIG_RT2X00_LIB_DEBUGFS
const struct rt2x00debug *debugfs;
#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
};
/*
* rt2x00 device flags
*/
enum rt2x00_flags {
/*
* Device state flags
*/
DEVICE_STATE_PRESENT,
DEVICE_STATE_REGISTERED_HW,
DEVICE_STATE_INITIALIZED,
DEVICE_STATE_STARTED,
DEVICE_STATE_ENABLED_RADIO,
/*
* Driver requirements
*/
DRIVER_REQUIRE_FIRMWARE,
DRIVER_REQUIRE_BEACON_GUARD,
DRIVER_REQUIRE_ATIM_QUEUE,
DRIVER_REQUIRE_DMA,
DRIVER_REQUIRE_COPY_IV,
DRIVER_REQUIRE_L2PAD,
/*
* Driver features
*/
CONFIG_SUPPORT_HW_BUTTON,
CONFIG_SUPPORT_HW_CRYPTO,
DRIVER_SUPPORT_CONTROL_FILTERS,
DRIVER_SUPPORT_CONTROL_FILTER_PSPOLL,
/*
* Driver configuration
*/
CONFIG_FRAME_TYPE,
CONFIG_RF_SEQUENCE,
CONFIG_EXTERNAL_LNA_A,
CONFIG_EXTERNAL_LNA_BG,
CONFIG_DOUBLE_ANTENNA,
CONFIG_DISABLE_LINK_TUNING,
CONFIG_CHANNEL_HT40,
};
/*
* rt2x00 device structure.
*/
struct rt2x00_dev {
/*
* Device structure.
* The structure stored in here depends on the
* system bus (PCI or USB).
* When accessing this variable, the rt2x00dev_{pci,usb}
* macros should be used for correct typecasting.
*/
struct device *dev;
/*
* Callback functions.
*/
const struct rt2x00_ops *ops;
/*
* IEEE80211 control structure.
*/
struct ieee80211_hw *hw;
struct ieee80211_supported_band bands[IEEE80211_NUM_BANDS];
enum ieee80211_band curr_band;
/*
* If enabled, the debugfs interface structures
* required for deregistration of debugfs.
*/
#ifdef CONFIG_RT2X00_LIB_DEBUGFS
struct rt2x00debug_intf *debugfs_intf;
#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
/*
* LED structure for changing the LED status
* by mac8011 or the kernel.
*/
#ifdef CONFIG_RT2X00_LIB_LEDS
struct rt2x00_led led_radio;
struct rt2x00_led led_assoc;
struct rt2x00_led led_qual;
u16 led_mcu_reg;
#endif /* CONFIG_RT2X00_LIB_LEDS */
/*
* Device flags.
* In these flags the current status and some
* of the device capabilities are stored.
*/
unsigned long flags;
/*
* Device information, Bus IRQ and name (PCI, SoC)
*/
int irq;
const char *name;
/*
* Chipset identification.
*/
struct rt2x00_chip chip;
/*
* hw capability specifications.
*/
struct hw_mode_spec spec;
/*
* This is the default TX/RX antenna setup as indicated
* by the device's EEPROM.
*/
struct antenna_setup default_ant;
/*
* Register pointers
* csr.base: CSR base register address. (PCI)
* csr.cache: CSR cache for usb_control_msg. (USB)
*/
union csr {
void __iomem *base;
void *cache;
} csr;
/*
* Mutex to protect register accesses.
* For PCI and USB devices it protects against concurrent indirect
* register access (BBP, RF, MCU) since accessing those
* registers require multiple calls to the CSR registers.
* For USB devices it also protects the csr_cache since that
* field is used for normal CSR access and it cannot support
* multiple callers simultaneously.
*/
struct mutex csr_mutex;
/*
* Current packet filter configuration for the device.
* This contains all currently active FIF_* flags send
* to us by mac80211 during configure_filter().
*/
unsigned int packet_filter;
/*
* Interface details:
* - Open ap interface count.
* - Open sta interface count.
* - Association count.
*/
unsigned int intf_ap_count;
unsigned int intf_sta_count;
unsigned int intf_associated;
/*
* Link quality
*/
struct link link;
/*
* EEPROM data.
*/
__le16 *eeprom;
/*
* Active RF register values.
* These are stored here so we don't need
* to read the rf registers and can directly
* use this value instead.
* This field should be accessed by using
* rt2x00_rf_read() and rt2x00_rf_write().
*/
u32 *rf;
/*
* LNA gain
*/
short lna_gain;
/*
* Current TX power value.
*/
u16 tx_power;
/*
* Current retry values.
*/
u8 short_retry;
u8 long_retry;
/*
* Rssi <-> Dbm offset
*/
u8 rssi_offset;
/*
* Frequency offset (for rt61pci & rt73usb).
*/
u8 freq_offset;
/*
* Calibration information (for rt2800usb & rt2800pci).
* [0] -> BW20
* [1] -> BW40
*/
u8 calibration[2];
/*
* Beacon interval.
*/
u16 beacon_int;
/*
* Low level statistics which will have
* to be kept up to date while device is running.
*/
struct ieee80211_low_level_stats low_level_stats;
/*
* RX configuration information.
*/
struct ieee80211_rx_status rx_status;
/*
* Scheduled work.
* NOTE: intf_work will use ieee80211_iterate_active_interfaces()
* which means it cannot be placed on the hw->workqueue
* due to RTNL locking requirements.
*/
struct work_struct intf_work;
/*
* Data queue arrays for RX, TX and Beacon.
* The Beacon array also contains the Atim queue
* if that is supported by the device.
*/
unsigned int data_queues;
struct data_queue *rx;
struct data_queue *tx;
struct data_queue *bcn;
/*
* Firmware image.
*/
const struct firmware *fw;
/*
* Driver specific data.
*/
void *priv;
};
/*
* Register defines.
* Some registers require multiple attempts before success,
* in those cases REGISTER_BUSY_COUNT attempts should be
* taken with a REGISTER_BUSY_DELAY interval.
*/
#define REGISTER_BUSY_COUNT 5
#define REGISTER_BUSY_DELAY 100
/*
* Generic RF access.
* The RF is being accessed by word index.
*/
static inline void rt2x00_rf_read(struct rt2x00_dev *rt2x00dev,
const unsigned int word, u32 *data)
{
BUG_ON(word < 1 || word > rt2x00dev->ops->rf_size / sizeof(u32));
*data = rt2x00dev->rf[word - 1];
}
static inline void rt2x00_rf_write(struct rt2x00_dev *rt2x00dev,
const unsigned int word, u32 data)
{
BUG_ON(word < 1 || word > rt2x00dev->ops->rf_size / sizeof(u32));
rt2x00dev->rf[word - 1] = data;
}
/*
* Generic EEPROM access.
* The EEPROM is being accessed by word index.
*/
static inline void *rt2x00_eeprom_addr(struct rt2x00_dev *rt2x00dev,
const unsigned int word)
{
return (void *)&rt2x00dev->eeprom[word];
}
static inline void rt2x00_eeprom_read(struct rt2x00_dev *rt2x00dev,
const unsigned int word, u16 *data)
{
*data = le16_to_cpu(rt2x00dev->eeprom[word]);
}
static inline void rt2x00_eeprom_write(struct rt2x00_dev *rt2x00dev,
const unsigned int word, u16 data)
{
rt2x00dev->eeprom[word] = cpu_to_le16(data);
}
/*
* Chipset handlers
*/
static inline void rt2x00_set_chip(struct rt2x00_dev *rt2x00dev,
const u16 rt, const u16 rf, const u16 rev)
{
rt2x00dev->chip.rt = rt;
rt2x00dev->chip.rf = rf;
rt2x00dev->chip.rev = rev;
INFO(rt2x00dev,
"Chipset detected - rt: %04x, rf: %04x, rev: %04x.\n",
rt2x00dev->chip.rt, rt2x00dev->chip.rf, rt2x00dev->chip.rev);
}
static inline char rt2x00_rt(struct rt2x00_dev *rt2x00dev, const u16 rt)
{
return (rt2x00dev->chip.rt == rt);
}
static inline char rt2x00_rf(struct rt2x00_dev *rt2x00dev, const u16 rf)
{
return (rt2x00dev->chip.rf == rf);
}
static inline u16 rt2x00_rev(struct rt2x00_dev *rt2x00dev)
{
return rt2x00dev->chip.rev;
}
static inline void rt2x00_set_chip_intf(struct rt2x00_dev *rt2x00dev,
enum rt2x00_chip_intf intf)
{
rt2x00dev->chip.intf = intf;
}
static inline bool rt2x00_intf(struct rt2x00_dev *rt2x00dev,
enum rt2x00_chip_intf intf)
{
return (rt2x00dev->chip.intf == intf);
}
static inline bool rt2x00_is_pci(struct rt2x00_dev *rt2x00dev)
{
return rt2x00_intf(rt2x00dev, RT2X00_CHIP_INTF_PCI);
}
static inline bool rt2x00_is_usb(struct rt2x00_dev *rt2x00dev)
{
return rt2x00_intf(rt2x00dev, RT2X00_CHIP_INTF_USB);
}
static inline bool rt2x00_is_soc(struct rt2x00_dev *rt2x00dev)
{
return rt2x00_intf(rt2x00dev, RT2X00_CHIP_INTF_SOC);
}
/**
* rt2x00queue_map_txskb - Map a skb into DMA for TX purposes.
* @rt2x00dev: Pointer to &struct rt2x00_dev.
* @skb: The skb to map.
*/
void rt2x00queue_map_txskb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb);
/**
* rt2x00queue_get_queue - Convert queue index to queue pointer
* @rt2x00dev: Pointer to &struct rt2x00_dev.
* @queue: rt2x00 queue index (see &enum data_queue_qid).
*/
struct data_queue *rt2x00queue_get_queue(struct rt2x00_dev *rt2x00dev,
const enum data_queue_qid queue);
/**
* rt2x00queue_get_entry - Get queue entry where the given index points to.
* @queue: Pointer to &struct data_queue from where we obtain the entry.
* @index: Index identifier for obtaining the correct index.
*/
struct queue_entry *rt2x00queue_get_entry(struct data_queue *queue,
enum queue_index index);
/*
* Interrupt context handlers.
*/
void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev);
void rt2x00lib_txdone(struct queue_entry *entry,
struct txdone_entry_desc *txdesc);
void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev,
struct queue_entry *entry);
/*
* mac80211 handlers.
*/
int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb);
int rt2x00mac_start(struct ieee80211_hw *hw);
void rt2x00mac_stop(struct ieee80211_hw *hw);
int rt2x00mac_add_interface(struct ieee80211_hw *hw,
struct ieee80211_vif *vif);
void rt2x00mac_remove_interface(struct ieee80211_hw *hw,
struct ieee80211_vif *vif);
int rt2x00mac_config(struct ieee80211_hw *hw, u32 changed);
void rt2x00mac_configure_filter(struct ieee80211_hw *hw,
unsigned int changed_flags,
unsigned int *total_flags,
u64 multicast);
int rt2x00mac_set_tim(struct ieee80211_hw *hw, struct ieee80211_sta *sta,
bool set);
#ifdef CONFIG_RT2X00_LIB_CRYPTO
int rt2x00mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
struct ieee80211_vif *vif, struct ieee80211_sta *sta,
struct ieee80211_key_conf *key);
#else
#define rt2x00mac_set_key NULL
#endif /* CONFIG_RT2X00_LIB_CRYPTO */
int rt2x00mac_get_stats(struct ieee80211_hw *hw,
struct ieee80211_low_level_stats *stats);
void rt2x00mac_bss_info_changed(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_bss_conf *bss_conf,
u32 changes);
int rt2x00mac_conf_tx(struct ieee80211_hw *hw, u16 queue,
const struct ieee80211_tx_queue_params *params);
void rt2x00mac_rfkill_poll(struct ieee80211_hw *hw);
/*
* Driver allocation handlers.
*/
int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev);
void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev);
#ifdef CONFIG_PM
int rt2x00lib_suspend(struct rt2x00_dev *rt2x00dev, pm_message_t state);
int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev);
#endif /* CONFIG_PM */
#endif /* RT2X00_H */
