#ifndef BCM43xx_H_
#define BCM43xx_H_
#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/stringify.h>
#include <linux/pci.h>
#include <net/ieee80211.h>
#include <net/ieee80211softmac.h>
#include <asm/atomic.h>
#include <asm/io.h>
#include "bcm43xx_debugfs.h"
#include "bcm43xx_leds.h"
#include "bcm43xx_sysfs.h"
#define PFX KBUILD_MODNAME ": "
#define BCM43xx_SWITCH_CORE_MAX_RETRIES 50
#define BCM43xx_IRQWAIT_MAX_RETRIES 50
#define BCM43xx_IO_SIZE 8192
/* Active Core PCI Configuration Register. */
#define BCM43xx_PCICFG_ACTIVE_CORE 0x80
/* SPROM control register. */
#define BCM43xx_PCICFG_SPROMCTL 0x88
/* Interrupt Control PCI Configuration Register. (Only on PCI cores with rev >= 6) */
#define BCM43xx_PCICFG_ICR 0x94
/* MMIO offsets */
#define BCM43xx_MMIO_DMA1_REASON 0x20
#define BCM43xx_MMIO_DMA1_IRQ_MASK 0x24
#define BCM43xx_MMIO_DMA2_REASON 0x28
#define BCM43xx_MMIO_DMA2_IRQ_MASK 0x2C
#define BCM43xx_MMIO_DMA3_REASON 0x30
#define BCM43xx_MMIO_DMA3_IRQ_MASK 0x34
#define BCM43xx_MMIO_DMA4_REASON 0x38
#define BCM43xx_MMIO_DMA4_IRQ_MASK 0x3C
#define BCM43xx_MMIO_STATUS_BITFIELD 0x120
#define BCM43xx_MMIO_STATUS2_BITFIELD 0x124
#define BCM43xx_MMIO_GEN_IRQ_REASON 0x128
#define BCM43xx_MMIO_GEN_IRQ_MASK 0x12C
#define BCM43xx_MMIO_RAM_CONTROL 0x130
#define BCM43xx_MMIO_RAM_DATA 0x134
#define BCM43xx_MMIO_PS_STATUS 0x140
#define BCM43xx_MMIO_RADIO_HWENABLED_HI 0x158
#define BCM43xx_MMIO_SHM_CONTROL 0x160
#define BCM43xx_MMIO_SHM_DATA 0x164
#define BCM43xx_MMIO_SHM_DATA_UNALIGNED 0x166
#define BCM43xx_MMIO_XMITSTAT_0 0x170
#define BCM43xx_MMIO_XMITSTAT_1 0x174
#define BCM43xx_MMIO_REV3PLUS_TSF_LOW 0x180 /* core rev >= 3 only */
#define BCM43xx_MMIO_REV3PLUS_TSF_HIGH 0x184 /* core rev >= 3 only */
#define BCM43xx_MMIO_DMA1_BASE 0x200
#define BCM43xx_MMIO_DMA2_BASE 0x220
#define BCM43xx_MMIO_DMA3_BASE 0x240
#define BCM43xx_MMIO_DMA4_BASE 0x260
#define BCM43xx_MMIO_PIO1_BASE 0x300
#define BCM43xx_MMIO_PIO2_BASE 0x310
#define BCM43xx_MMIO_PIO3_BASE 0x320
#define BCM43xx_MMIO_PIO4_BASE 0x330
#define BCM43xx_MMIO_PHY_VER 0x3E0
#define BCM43xx_MMIO_PHY_RADIO 0x3E2
#define BCM43xx_MMIO_ANTENNA 0x3E8
#define BCM43xx_MMIO_CHANNEL 0x3F0
#define BCM43xx_MMIO_CHANNEL_EXT 0x3F4
#define BCM43xx_MMIO_RADIO_CONTROL 0x3F6
#define BCM43xx_MMIO_RADIO_DATA_HIGH 0x3F8
#define BCM43xx_MMIO_RADIO_DATA_LOW 0x3FA
#define BCM43xx_MMIO_PHY_CONTROL 0x3FC
#define BCM43xx_MMIO_PHY_DATA 0x3FE
#define BCM43xx_MMIO_MACFILTER_CONTROL 0x420
#define BCM43xx_MMIO_MACFILTER_DATA 0x422
#define BCM43xx_MMIO_RADIO_HWENABLED_LO 0x49A
#define BCM43xx_MMIO_GPIO_CONTROL 0x49C
#define BCM43xx_MMIO_GPIO_MASK 0x49E
#define BCM43xx_MMIO_TSF_0 0x632 /* core rev < 3 only */
#define BCM43xx_MMIO_TSF_1 0x634 /* core rev < 3 only */
#define BCM43xx_MMIO_TSF_2 0x636 /* core rev < 3 only */
#define BCM43xx_MMIO_TSF_3 0x638 /* core rev < 3 only */
#define BCM43xx_MMIO_POWERUP_DELAY 0x6A8
/* SPROM offsets. */
#define BCM43xx_SPROM_BASE 0x1000
#define BCM43xx_SPROM_BOARDFLAGS2 0x1c
#define BCM43xx_SPROM_IL0MACADDR 0x24
#define BCM43xx_SPROM_ET0MACADDR 0x27
#define BCM43xx_SPROM_ET1MACADDR 0x2a
#define BCM43xx_SPROM_ETHPHY 0x2d
#define BCM43xx_SPROM_BOARDREV 0x2e
#define BCM43xx_SPROM_PA0B0 0x2f
#define BCM43xx_SPROM_PA0B1 0x30
#define BCM43xx_SPROM_PA0B2 0x31
#define BCM43xx_SPROM_WL0GPIO0 0x32
#define BCM43xx_SPROM_WL0GPIO2 0x33
#define BCM43xx_SPROM_MAXPWR 0x34
#define BCM43xx_SPROM_PA1B0 0x35
#define BCM43xx_SPROM_PA1B1 0x36
#define BCM43xx_SPROM_PA1B2 0x37
#define BCM43xx_SPROM_IDL_TSSI_TGT 0x38
#define BCM43xx_SPROM_BOARDFLAGS 0x39
#define BCM43xx_SPROM_ANTENNA_GAIN 0x3a
#define BCM43xx_SPROM_VERSION 0x3f
/* BCM43xx_SPROM_BOARDFLAGS values */
#define BCM43xx_BFL_BTCOEXIST 0x0001 /* implements Bluetooth coexistance */
#define BCM43xx_BFL_PACTRL 0x0002 /* GPIO 9 controlling the PA */
#define BCM43xx_BFL_AIRLINEMODE 0x0004 /* implements GPIO 13 radio disable indication */
#define BCM43xx_BFL_RSSI 0x0008 /* software calculates nrssi slope. */
#define BCM43xx_BFL_ENETSPI 0x0010 /* has ephy roboswitch spi */
#define BCM43xx_BFL_XTAL_NOSLOW 0x0020 /* no slow clock available */
#define BCM43xx_BFL_CCKHIPWR 0x0040 /* can do high power CCK transmission */
#define BCM43xx_BFL_ENETADM 0x0080 /* has ADMtek switch */
#define BCM43xx_BFL_ENETVLAN 0x0100 /* can do vlan */
#define BCM43xx_BFL_AFTERBURNER 0x0200 /* supports Afterburner mode */
#define BCM43xx_BFL_NOPCI 0x0400 /* leaves PCI floating */
#define BCM43xx_BFL_FEM 0x0800 /* supports the Front End Module */
#define BCM43xx_BFL_EXTLNA 0x1000 /* has an external LNA */
#define BCM43xx_BFL_HGPA 0x2000 /* had high gain PA */
#define BCM43xx_BFL_BTCMOD 0x4000 /* BFL_BTCOEXIST is given in alternate GPIOs */
#define BCM43xx_BFL_ALTIQ 0x8000 /* alternate I/Q settings */
/* GPIO register offset, in both ChipCommon and PCI core. */
#define BCM43xx_GPIO_CONTROL 0x6c
/* SHM Routing */
#define BCM43xx_SHM_SHARED 0x0001
#define BCM43xx_SHM_WIRELESS 0x0002
#define BCM43xx_SHM_PCM 0x0003
#define BCM43xx_SHM_HWMAC 0x0004
#define BCM43xx_SHM_UCODE 0x0300
/* MacFilter offsets. */
#define BCM43xx_MACFILTER_SELF 0x0000
#define BCM43xx_MACFILTER_ASSOC 0x0003
/* Chipcommon registers. */
#define BCM43xx_CHIPCOMMON_CAPABILITIES 0x04
#define BCM43xx_CHIPCOMMON_PLLONDELAY 0xB0
#define BCM43xx_CHIPCOMMON_FREFSELDELAY 0xB4
#define BCM43xx_CHIPCOMMON_SLOWCLKCTL 0xB8
#define BCM43xx_CHIPCOMMON_SYSCLKCTL 0xC0
/* PCI core specific registers. */
#define BCM43xx_PCICORE_BCAST_ADDR 0x50
#define BCM43xx_PCICORE_BCAST_DATA 0x54
#define BCM43xx_PCICORE_SBTOPCI2 0x108
/* SBTOPCI2 values. */
#define BCM43xx_SBTOPCI2_PREFETCH 0x4
#define BCM43xx_SBTOPCI2_BURST 0x8
/* Chipcommon capabilities. */
#define BCM43xx_CAPABILITIES_PCTL 0x00040000
#define BCM43xx_CAPABILITIES_PLLMASK 0x00030000
#define BCM43xx_CAPABILITIES_PLLSHIFT 16
#define BCM43xx_CAPABILITIES_FLASHMASK 0x00000700
#define BCM43xx_CAPABILITIES_FLASHSHIFT 8
#define BCM43xx_CAPABILITIES_EXTBUSPRESENT 0x00000040
#define BCM43xx_CAPABILITIES_UARTGPIO 0x00000020
#define BCM43xx_CAPABILITIES_UARTCLOCKMASK 0x00000018
#define BCM43xx_CAPABILITIES_UARTCLOCKSHIFT 3
#define BCM43xx_CAPABILITIES_MIPSBIGENDIAN 0x00000004
#define BCM43xx_CAPABILITIES_NRUARTSMASK 0x00000003
/* PowerControl */
#define BCM43xx_PCTL_IN 0xB0
#define BCM43xx_PCTL_OUT 0xB4
#define BCM43xx_PCTL_OUTENABLE 0xB8
#define BCM43xx_PCTL_XTAL_POWERUP 0x40
#define BCM43xx_PCTL_PLL_POWERDOWN 0x80
/* PowerControl Clock Modes */
#define BCM43xx_PCTL_CLK_FAST 0x00
#define BCM43xx_PCTL_CLK_SLOW 0x01
#define BCM43xx_PCTL_CLK_DYNAMIC 0x02
#define BCM43xx_PCTL_FORCE_SLOW 0x0800
#define BCM43xx_PCTL_FORCE_PLL 0x1000
#define BCM43xx_PCTL_DYN_XTAL 0x2000
/* COREIDs */
#define BCM43xx_COREID_CHIPCOMMON 0x800
#define BCM43xx_COREID_ILINE20 0x801
#define BCM43xx_COREID_SDRAM 0x803
#define BCM43xx_COREID_PCI 0x804
#define BCM43xx_COREID_MIPS 0x805
#define BCM43xx_COREID_ETHERNET 0x806
#define BCM43xx_COREID_V90 0x807
#define BCM43xx_COREID_USB11_HOSTDEV 0x80a
#define BCM43xx_COREID_IPSEC 0x80b
#define BCM43xx_COREID_PCMCIA 0x80d
#define BCM43xx_COREID_EXT_IF 0x80f
#define BCM43xx_COREID_80211 0x812
#define BCM43xx_COREID_MIPS_3302 0x816
#define BCM43xx_COREID_USB11_HOST 0x817
#define BCM43xx_COREID_USB11_DEV 0x818
#define BCM43xx_COREID_USB20_HOST 0x819
#define BCM43xx_COREID_USB20_DEV 0x81a
#define BCM43xx_COREID_SDIO_HOST 0x81b
/* Core Information Registers */
#define BCM43xx_CIR_BASE 0xf00
#define BCM43xx_CIR_SBTPSFLAG (BCM43xx_CIR_BASE + 0x18)
#define BCM43xx_CIR_SBIMSTATE (BCM43xx_CIR_BASE + 0x90)
#define BCM43xx_CIR_SBINTVEC (BCM43xx_CIR_BASE + 0x94)
#define BCM43xx_CIR_SBTMSTATELOW (BCM43xx_CIR_BASE + 0x98)
#define BCM43xx_CIR_SBTMSTATEHIGH (BCM43xx_CIR_BASE + 0x9c)
#define BCM43xx_CIR_SBIMCONFIGLOW (BCM43xx_CIR_BASE + 0xa8)
#define BCM43xx_CIR_SB_ID_HI (BCM43xx_CIR_BASE + 0xfc)
/* Mask to get the Backplane Flag Number from SBTPSFLAG. */
#define BCM43xx_BACKPLANE_FLAG_NR_MASK 0x3f
/* SBIMCONFIGLOW values/masks. */
#define BCM43xx_SBIMCONFIGLOW_SERVICE_TOUT_MASK 0x00000007
#define BCM43xx_SBIMCONFIGLOW_SERVICE_TOUT_SHIFT 0
#define BCM43xx_SBIMCONFIGLOW_REQUEST_TOUT_MASK 0x00000070
#define BCM43xx_SBIMCONFIGLOW_REQUEST_TOUT_SHIFT 4
#define BCM43xx_SBIMCONFIGLOW_CONNID_MASK 0x00ff0000
#define BCM43xx_SBIMCONFIGLOW_CONNID_SHIFT 16
/* sbtmstatelow state flags */
#define BCM43xx_SBTMSTATELOW_RESET 0x01
#define BCM43xx_SBTMSTATELOW_REJECT 0x02
#define BCM43xx_SBTMSTATELOW_CLOCK 0x10000
#define BCM43xx_SBTMSTATELOW_FORCE_GATE_CLOCK 0x20000
/* sbtmstatehigh state flags */
#define BCM43xx_SBTMSTATEHIGH_SERROR 0x1
#define BCM43xx_SBTMSTATEHIGH_BUSY 0x4
/* sbimstate flags */
#define BCM43xx_SBIMSTATE_IB_ERROR 0x20000
#define BCM43xx_SBIMSTATE_TIMEOUT 0x40000
/* PHYVersioning */
#define BCM43xx_PHYTYPE_A 0x00
#define BCM43xx_PHYTYPE_B 0x01
#define BCM43xx_PHYTYPE_G 0x02
/* PHYRegisters */
#define BCM43xx_PHY_ILT_A_CTRL 0x0072
#define BCM43xx_PHY_ILT_A_DATA1 0x0073
#define BCM43xx_PHY_ILT_A_DATA2 0x0074
#define BCM43xx_PHY_G_LO_CONTROL 0x0810
#define BCM43xx_PHY_ILT_G_CTRL 0x0472
#define BCM43xx_PHY_ILT_G_DATA1 0x0473
#define BCM43xx_PHY_ILT_G_DATA2 0x0474
#define BCM43xx_PHY_A_PCTL 0x007B
#define BCM43xx_PHY_G_PCTL 0x0029
#define BCM43xx_PHY_A_CRS 0x0029
#define BCM43xx_PHY_RADIO_BITFIELD 0x0401
#define BCM43xx_PHY_G_CRS 0x0429
#define BCM43xx_PHY_NRSSILT_CTRL 0x0803
#define BCM43xx_PHY_NRSSILT_DATA 0x0804
/* RadioRegisters */
#define BCM43xx_RADIOCTL_ID 0x01
/* StatusBitField */
#define BCM43xx_SBF_MAC_ENABLED 0x00000001
#define BCM43xx_SBF_2 0x00000002 /*FIXME: fix name*/
#define BCM43xx_SBF_CORE_READY 0x00000004
#define BCM43xx_SBF_400 0x00000400 /*FIXME: fix name*/
#define BCM43xx_SBF_4000 0x00004000 /*FIXME: fix name*/
#define BCM43xx_SBF_8000 0x00008000 /*FIXME: fix name*/
#define BCM43xx_SBF_XFER_REG_BYTESWAP 0x00010000
#define BCM43xx_SBF_MODE_NOTADHOC 0x00020000
#define BCM43xx_SBF_MODE_AP 0x00040000
#define BCM43xx_SBF_RADIOREG_LOCK 0x00080000
#define BCM43xx_SBF_MODE_MONITOR 0x00400000
#define BCM43xx_SBF_MODE_PROMISC 0x01000000
#define BCM43xx_SBF_PS1 0x02000000
#define BCM43xx_SBF_PS2 0x04000000
#define BCM43xx_SBF_NO_SSID_BCAST 0x08000000
#define BCM43xx_SBF_TIME_UPDATE 0x10000000
#define BCM43xx_SBF_80000000 0x80000000 /*FIXME: fix name*/
/* MicrocodeFlagsBitfield (addr + lo-word values?)*/
#define BCM43xx_UCODEFLAGS_OFFSET 0x005E
#define BCM43xx_UCODEFLAG_AUTODIV 0x0001
#define BCM43xx_UCODEFLAG_UNKBGPHY 0x0002
#define BCM43xx_UCODEFLAG_UNKBPHY 0x0004
#define BCM43xx_UCODEFLAG_UNKGPHY 0x0020
#define BCM43xx_UCODEFLAG_UNKPACTRL 0x0040
#define BCM43xx_UCODEFLAG_JAPAN 0x0080
/* Generic-Interrupt reasons. */
#define BCM43xx_IRQ_READY (1 << 0)
#define BCM43xx_IRQ_BEACON (1 << 1)
#define BCM43xx_IRQ_PS (1 << 2)
#define BCM43xx_IRQ_REG124 (1 << 5)
#define BCM43xx_IRQ_PMQ (1 << 6)
#define BCM43xx_IRQ_PIO_WORKAROUND (1 << 8)
#define BCM43xx_IRQ_XMIT_ERROR (1 << 11)
#define BCM43xx_IRQ_RX (1 << 15)
#define BCM43xx_IRQ_SCAN (1 << 16)
#define BCM43xx_IRQ_NOISE (1 << 18)
#define BCM43xx_IRQ_XMIT_STATUS (1 << 29)
#define BCM43xx_IRQ_ALL 0xffffffff
#define BCM43xx_IRQ_INITIAL (BCM43xx_IRQ_PS | \
BCM43xx_IRQ_REG124 | \
BCM43xx_IRQ_PMQ | \
BCM43xx_IRQ_XMIT_ERROR | \
BCM43xx_IRQ_RX | \
BCM43xx_IRQ_SCAN | \
BCM43xx_IRQ_NOISE | \
BCM43xx_IRQ_XMIT_STATUS)
/* Initial default iw_mode */
#define BCM43xx_INITIAL_IWMODE IW_MODE_INFRA
/* Bus type PCI. */
#define BCM43xx_BUSTYPE_PCI 0
/* Bus type Silicone Backplane Bus. */
#define BCM43xx_BUSTYPE_SB 1
/* Bus type PCMCIA. */
#define BCM43xx_BUSTYPE_PCMCIA 2
/* Threshold values. */
#define BCM43xx_MIN_RTS_THRESHOLD 1U
#define BCM43xx_MAX_RTS_THRESHOLD 2304U
#define BCM43xx_DEFAULT_RTS_THRESHOLD BCM43xx_MAX_RTS_THRESHOLD
#define BCM43xx_DEFAULT_SHORT_RETRY_LIMIT 7
#define BCM43xx_DEFAULT_LONG_RETRY_LIMIT 4
/* Max size of a security key */
#define BCM43xx_SEC_KEYSIZE 16
/* Security algorithms. */
enum {
BCM43xx_SEC_ALGO_NONE = 0, /* unencrypted, as of TX header. */
BCM43xx_SEC_ALGO_WEP,
BCM43xx_SEC_ALGO_UNKNOWN,
BCM43xx_SEC_ALGO_AES,
BCM43xx_SEC_ALGO_WEP104,
BCM43xx_SEC_ALGO_TKIP,
};
#ifdef assert
# undef assert
#endif
#ifdef CONFIG_BCM43XX_DEBUG
#define assert(expr) \
do { \
if (unlikely(!(expr))) { \
printk(KERN_ERR PFX "ASSERTION FAILED (%s) at: %s:%d:%s()\n", \
#expr, __FILE__, __LINE__, __FUNCTION__); \
} \
} while (0)
#else
#define assert(expr) do { /* nothing */ } while (0)
#endif
/* rate limited printk(). */
#ifdef printkl
# undef printkl
#endif
#define printkl(f, x...) do { if (printk_ratelimit()) printk(f ,##x); } while (0)
/* rate limited printk() for debugging */
#ifdef dprintkl
# undef dprintkl
#endif
#ifdef CONFIG_BCM43XX_DEBUG
# define dprintkl printkl
#else
# define dprintkl(f, x...) do { /* nothing */ } while (0)
#endif
/* Helper macro for if branches.
* An if branch marked with this macro is only taken in DEBUG mode.
* Example:
* if (DEBUG_ONLY(foo == bar)) {
* do something
* }
* In DEBUG mode, the branch will be taken if (foo == bar).
* In non-DEBUG mode, the branch will never be taken.
*/
#ifdef DEBUG_ONLY
# undef DEBUG_ONLY
#endif
#ifdef CONFIG_BCM43XX_DEBUG
# define DEBUG_ONLY(x) (x)
#else
# define DEBUG_ONLY(x) 0
#endif
/* debugging printk() */
#ifdef dprintk
# undef dprintk
#endif
#ifdef CONFIG_BCM43XX_DEBUG
# define dprintk(f, x...) do { printk(f ,##x); } while (0)
#else
# define dprintk(f, x...) do { /* nothing */ } while (0)
#endif
struct net_device;
struct pci_dev;
struct bcm43xx_dmaring;
struct bcm43xx_pioqueue;
struct bcm43xx_initval {
u16 offset;
u16 size;
u32 value;
} __attribute__((__packed__));
/* Values for bcm430x_sprominfo.locale */
enum {
BCM43xx_LOCALE_WORLD = 0,
BCM43xx_LOCALE_THAILAND,
BCM43xx_LOCALE_ISRAEL,
BCM43xx_LOCALE_JORDAN,
BCM43xx_LOCALE_CHINA,
BCM43xx_LOCALE_JAPAN,
BCM43xx_LOCALE_USA_CANADA_ANZ,
BCM43xx_LOCALE_EUROPE,
BCM43xx_LOCALE_USA_LOW,
BCM43xx_LOCALE_JAPAN_HIGH,
BCM43xx_LOCALE_ALL,
BCM43xx_LOCALE_NONE,
};
#define BCM43xx_SPROM_SIZE 64 /* in 16-bit words. */
struct bcm43xx_sprominfo {
u16 boardflags2;
u8 il0macaddr[6];
u8 et0macaddr[6];
u8 et1macaddr[6];
u8 et0phyaddr:5;
u8 et1phyaddr:5;
u8 et0mdcport:1;
u8 et1mdcport:1;
u8 boardrev;
u8 locale:4;
u8 antennas_aphy:2;
u8 antennas_bgphy:2;
u16 pa0b0;
u16 pa0b1;
u16 pa0b2;
u8 wl0gpio0;
u8 wl0gpio1;
u8 wl0gpio2;
u8 wl0gpio3;
u8 maxpower_aphy;
u8 maxpower_bgphy;
u16 pa1b0;
u16 pa1b1;
u16 pa1b2;
u8 idle_tssi_tgt_aphy;
u8 idle_tssi_tgt_bgphy;
u16 boardflags;
u16 antennagain_aphy;
u16 antennagain_bgphy;
};
/* Value pair to measure the LocalOscillator. */
struct bcm43xx_lopair {
s8 low;
s8 high;
u8 used:1;
};
#define BCM43xx_LO_COUNT (14*4)
struct bcm43xx_phyinfo {
/* Hardware Data */
u8 version;
u8 type;
u8 rev;
u16 antenna_diversity;
u16 savedpctlreg;
u16 minlowsig[2];
u16 minlowsigpos[2];
u8 connected:1,
calibrated:1,
is_locked:1, /* used in bcm43xx_phy_{un}lock() */
dyn_tssi_tbl:1; /* used in bcm43xx_phy_init_tssi2dbm_table() */
/* LO Measurement Data.
* Use bcm43xx_get_lopair() to get a value.
*/
struct bcm43xx_lopair *_lo_pairs;
/* TSSI to dBm table in use */
const s8 *tssi2dbm;
/* idle TSSI value */
s8 idle_tssi;
/* Values from bcm43xx_calc_loopback_gain() */
u16 loopback_gain[2];
/* PHY lock for core.rev < 3
* This lock is only used by bcm43xx_phy_{un}lock()
*/
spinlock_t lock;
};
struct bcm43xx_radioinfo {
u16 manufact;
u16 version;
u8 revision;
/* Desired TX power in dBm Q5.2 */
u16 txpower_desired;
/* TX Power control values. */
union {
/* B/G PHY */
struct {
u16 baseband_atten;
u16 radio_atten;
u16 txctl1;
u16 txctl2;
};
/* A PHY */
struct {
u16 txpwr_offset;
};
};
/* Current Interference Mitigation mode */
int interfmode;
/* Stack of saved values from the Interference Mitigation code.
* Each value in the stack is layed out as follows:
* bit 0-11: offset
* bit 12-15: register ID
* bit 16-32: value
* register ID is: 0x1 PHY, 0x2 Radio, 0x3 ILT
*/
#define BCM43xx_INTERFSTACK_SIZE 26
u32 interfstack[BCM43xx_INTERFSTACK_SIZE];
/* Saved values from the NRSSI Slope calculation */
s16 nrssi[2];
s32 nrssislope;
/* In memory nrssi lookup table. */
s8 nrssi_lt[64];
/* current channel */
u8 channel;
u8 initial_channel;
u16 lofcal;
u16 initval;
u8 enabled:1;
/* ACI (adjacent channel interference) flags. */
u8 aci_enable:1,
aci_wlan_automatic:1,
aci_hw_rssi:1;
};
/* Data structures for DMA transmission, per 80211 core. */
struct bcm43xx_dma {
struct bcm43xx_dmaring *tx_ring0;
struct bcm43xx_dmaring *tx_ring1;
struct bcm43xx_dmaring *tx_ring2;
struct bcm43xx_dmaring *tx_ring3;
struct bcm43xx_dmaring *rx_ring0;
struct bcm43xx_dmaring *rx_ring1; /* only available on core.rev < 5 */
};
/* Data structures for PIO transmission, per 80211 core. */
struct bcm43xx_pio {
struct bcm43xx_pioqueue *queue0;
struct bcm43xx_pioqueue *queue1;
struct bcm43xx_pioqueue *queue2;
struct bcm43xx_pioqueue *queue3;
};
#define BCM43xx_MAX_80211_CORES 2
#ifdef CONFIG_BCM947XX
#define core_offset(bcm) (bcm)->current_core_offset
#else
#define core_offset(bcm) 0
#endif
/* Generic information about a core. */
struct bcm43xx_coreinfo {
u8 available:1,
enabled:1,
initialized:1;
/** core_id ID number */
u16 id;
/** core_rev revision number */
u8 rev;
/** Index number for _switch_core() */
u8 index;
};
/* Additional information for each 80211 core. */
struct bcm43xx_coreinfo_80211 {
/* PHY device. */
struct bcm43xx_phyinfo phy;
/* Radio device. */
struct bcm43xx_radioinfo radio;
union {
/* DMA context. */
struct bcm43xx_dma dma;
/* PIO context. */
struct bcm43xx_pio pio;
};
};
/* Context information for a noise calculation (Link Quality). */
struct bcm43xx_noise_calculation {
struct bcm43xx_coreinfo *core_at_start;
u8 channel_at_start;
u8 calculation_running:1;
u8 nr_samples;
s8 samples[8][4];
};
struct bcm43xx_stats {
u8 link_quality;
u8 noise;
struct iw_statistics wstats;
/* Store the last TX/RX times here for updating the leds. */
unsigned long last_tx;
unsigned long last_rx;
};
struct bcm43xx_key {
u8 enabled:1;
u8 algorithm;
};
struct bcm43xx_private {
struct bcm43xx_sysfs sysfs;
struct ieee80211_device *ieee;
struct ieee80211softmac_device *softmac;
struct net_device *net_dev;
struct pci_dev *pci_dev;
unsigned int irq;
void __iomem *mmio_addr;
unsigned int mmio_len;
/* Do not use the lock directly. Use the bcm43xx_lock* helper
* functions, to be MMIO-safe. */
spinlock_t _lock;
/* Driver status flags. */
u32 initialized:1, /* init_board() succeed */
was_initialized:1, /* for PCI suspend/resume. */
shutting_down:1, /* free_board() in progress */
__using_pio:1, /* Internal, use bcm43xx_using_pio(). */
bad_frames_preempt:1, /* Use "Bad Frames Preemption" (default off) */
reg124_set_0x4:1, /* Some variable to keep track of IRQ stuff. */
powersaving:1, /* TRUE if we are in PowerSaving mode. FALSE otherwise. */
short_preamble:1, /* TRUE, if short preamble is enabled. */
firmware_norelease:1; /* Do not release the firmware. Used on suspend. */
struct bcm43xx_stats stats;
/* Bus type we are connected to.
* This is currently always BCM43xx_BUSTYPE_PCI
*/
u8 bustype;
u16 board_vendor;
u16 board_type;
u16 board_revision;
u16 chip_id;
u8 chip_rev;
u8 chip_package;
struct bcm43xx_sprominfo sprom;
#define BCM43xx_NR_LEDS 4
struct bcm43xx_led leds[BCM43xx_NR_LEDS];
/* The currently active core. */
struct bcm43xx_coreinfo *current_core;
#ifdef CONFIG_BCM947XX
/** current core memory offset */
u32 current_core_offset;
#endif
struct bcm43xx_coreinfo *active_80211_core;
/* coreinfo structs for all possible cores follow.
* Note that a core might not exist.
* So check the coreinfo flags before using it.
*/
struct bcm43xx_coreinfo core_chipcommon;
struct bcm43xx_coreinfo core_pci;
struct bcm43xx_coreinfo core_80211[ BCM43xx_MAX_80211_CORES ];
/* Additional information, specific to the 80211 cores. */
struct bcm43xx_coreinfo_80211 core_80211_ext[ BCM43xx_MAX_80211_CORES ];
/* Index of the current 80211 core. If current_core is not
* an 80211 core, this is -1.
*/
int current_80211_core_idx;
/* Number of available 80211 cores. */
int nr_80211_available;
u32 chipcommon_capabilities;
/* Reason code of the last interrupt. */
u32 irq_reason;
u32 dma_reason[4];
/* saved irq enable/disable state bitfield. */
u32 irq_savedstate;
/* Link Quality calculation context. */
struct bcm43xx_noise_calculation noisecalc;
/* Threshold values. */
//TODO: The RTS thr has to be _used_. Currently, it is only set via WX.
u32 rts_threshold;
/* Interrupt Service Routine tasklet (bottom-half) */
struct tasklet_struct isr_tasklet;
/* Periodic tasks */
struct timer_list periodic_tasks;
unsigned int periodic_state;
struct work_struct restart_work;
/* Informational stuff. */
char nick[IW_ESSID_MAX_SIZE + 1];
/* encryption/decryption */
u16 security_offset;
struct bcm43xx_key key[54];
u8 default_key_idx;
/* Firmware. */
const struct firmware *ucode;
const struct firmware *pcm;
const struct firmware *initvals0;
const struct firmware *initvals1;
/* Debugging stuff follows. */
#ifdef CONFIG_BCM43XX_DEBUG
struct bcm43xx_dfsentry *dfsentry;
#endif
};
/* bcm43xx_(un)lock() protect struct bcm43xx_private.
* Note that _NO_ MMIO writes are allowed. If you want to
* write to the device through MMIO in the critical section, use
* the *_mmio lock functions.
* MMIO read-access is allowed, though.
*/
#define bcm43xx_lock(bcm, flags) spin_lock_irqsave(&(bcm)->_lock, flags)
#define bcm43xx_unlock(bcm, flags) spin_unlock_irqrestore(&(bcm)->_lock, flags)
/* bcm43xx_(un)lock_mmio() protect struct bcm43xx_private and MMIO.
* MMIO write-access to the device is allowed.
* All MMIO writes are flushed on unlock, so it is guaranteed to not
* interfere with other threads writing MMIO registers.
*/
#define bcm43xx_lock_mmio(bcm, flags) bcm43xx_lock(bcm, flags)
#define bcm43xx_unlock_mmio(bcm, flags) do { mmiowb(); bcm43xx_unlock(bcm, flags); } while (0)
static inline
struct bcm43xx_private * bcm43xx_priv(struct net_device *dev)
{
return ieee80211softmac_priv(dev);
}
/* Helper function, which returns a boolean.
* TRUE, if PIO is used; FALSE, if DMA is used.
*/
#if defined(CONFIG_BCM43XX_DMA) && defined(CONFIG_BCM43XX_PIO)
static inline
int bcm43xx_using_pio(struct bcm43xx_private *bcm)
{
return bcm->__using_pio;
}
#elif defined(CONFIG_BCM43XX_DMA)
static inline
int bcm43xx_using_pio(struct bcm43xx_private *bcm)
{
return 0;
}
#elif defined(CONFIG_BCM43XX_PIO)
static inline
int bcm43xx_using_pio(struct bcm43xx_private *bcm)
{
return 1;
}
#else
# error "Using neither DMA nor PIO? Confused..."
#endif
/* Helper functions to access data structures private to the 80211 cores.
* Note that we _must_ have an 80211 core mapped when calling
* any of these functions.
*/
static inline
struct bcm43xx_pio * bcm43xx_current_pio(struct bcm43xx_private *bcm)
{
assert(bcm43xx_using_pio(bcm));
assert(bcm->current_80211_core_idx >= 0);
assert(bcm->current_80211_core_idx < BCM43xx_MAX_80211_CORES);
return &(bcm->core_80211_ext[bcm->current_80211_core_idx].pio);
}
static inline
struct bcm43xx_dma * bcm43xx_current_dma(struct bcm43xx_private *bcm)
{
assert(!bcm43xx_using_pio(bcm));
assert(bcm->current_80211_core_idx >= 0);
assert(bcm->current_80211_core_idx < BCM43xx_MAX_80211_CORES);
return &(bcm->core_80211_ext[bcm->current_80211_core_idx].dma);
}
static inline
struct bcm43xx_phyinfo * bcm43xx_current_phy(struct bcm43xx_private *bcm)
{
assert(bcm->current_80211_core_idx >= 0);
assert(bcm->current_80211_core_idx < BCM43xx_MAX_80211_CORES);
return &(bcm->core_80211_ext[bcm->current_80211_core_idx].phy);
}
static inline
struct bcm43xx_radioinfo * bcm43xx_current_radio(struct bcm43xx_private *bcm)
{
assert(bcm->current_80211_core_idx >= 0);
assert(bcm->current_80211_core_idx < BCM43xx_MAX_80211_CORES);
return &(bcm->core_80211_ext[bcm->current_80211_core_idx].radio);
}
/* Are we running in init_board() context? */
static inline
int bcm43xx_is_initializing(struct bcm43xx_private *bcm)
{
if (bcm->initialized)
return 0;
if (bcm->shutting_down)
return 0;
return 1;
}
static inline
struct bcm43xx_lopair * bcm43xx_get_lopair(struct bcm43xx_phyinfo *phy,
u16 radio_attenuation,
u16 baseband_attenuation)
{
return phy->_lo_pairs + (radio_attenuation + 14 * (baseband_attenuation / 2));
}
static inline
u16 bcm43xx_read16(struct bcm43xx_private *bcm, u16 offset)
{
return ioread16(bcm->mmio_addr + core_offset(bcm) + offset);
}
static inline
void bcm43xx_write16(struct bcm43xx_private *bcm, u16 offset, u16 value)
{
iowrite16(value, bcm->mmio_addr + core_offset(bcm) + offset);
}
static inline
u32 bcm43xx_read32(struct bcm43xx_private *bcm, u16 offset)
{
return ioread32(bcm->mmio_addr + core_offset(bcm) + offset);
}
static inline
void bcm43xx_write32(struct bcm43xx_private *bcm, u16 offset, u32 value)
{
iowrite32(value, bcm->mmio_addr + core_offset(bcm) + offset);
}
static inline
int bcm43xx_pci_read_config16(struct bcm43xx_private *bcm, int offset, u16 *value)
{
return pci_read_config_word(bcm->pci_dev, offset, value);
}
static inline
int bcm43xx_pci_read_config32(struct bcm43xx_private *bcm, int offset, u32 *value)
{
return pci_read_config_dword(bcm->pci_dev, offset, value);
}
static inline
int bcm43xx_pci_write_config16(struct bcm43xx_private *bcm, int offset, u16 value)
{
return pci_write_config_word(bcm->pci_dev, offset, value);
}
static inline
int bcm43xx_pci_write_config32(struct bcm43xx_private *bcm, int offset, u32 value)
{
return pci_write_config_dword(bcm->pci_dev, offset, value);
}
/** Limit a value between two limits */
#ifdef limit_value
# undef limit_value
#endif
#define limit_value(value, min, max) \
({ \
typeof(value) __value = (value); \
typeof(value) __min = (min); \
typeof(value) __max = (max); \
if (__value < __min) \
__value = __min; \
else if (__value > __max) \
__value = __max; \
__value; \
})
/** Helpers to print MAC addresses. */
#define BCM43xx_MACFMT "%02x:%02x:%02x:%02x:%02x:%02x"
#define BCM43xx_MACARG(x) ((u8*)(x))[0], ((u8*)(x))[1], \
((u8*)(x))[2], ((u8*)(x))[3], \
((u8*)(x))[4], ((u8*)(x))[5]
#endif /* BCM43xx_H_ */
