/* $Id: cosa.c,v 1.31 2000/03/08 17:47:16 kas Exp $ */
/*
* Copyright (C) 1995-1997 Jan "Yenya" Kasprzak <kas@fi.muni.cz>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
* The driver for the SRP and COSA synchronous serial cards.
*
* HARDWARE INFO
*
* Both cards are developed at the Institute of Computer Science,
* Masaryk University (http://www.ics.muni.cz/). The hardware is
* developed by Jiri Novotny <novotny@ics.muni.cz>. More information
* and the photo of both cards is available at
* http://www.pavoucek.cz/cosa.html. The card documentation, firmwares
* and other goods can be downloaded from ftp://ftp.ics.muni.cz/pub/cosa/.
* For Linux-specific utilities, see below in the "Software info" section.
* If you want to order the card, contact Jiri Novotny.
*
* The SRP (serial port?, the Czech word "srp" means "sickle") card
* is a 2-port intelligent (with its own 8-bit CPU) synchronous serial card
* with V.24 interfaces up to 80kb/s each.
*
* The COSA (communication serial adapter?, the Czech word "kosa" means
* "scythe") is a next-generation sync/async board with two interfaces
* - currently any of V.24, X.21, V.35 and V.36 can be selected.
* It has a 16-bit SAB80166 CPU and can do up to 10 Mb/s per channel.
* The 8-channels version is in development.
*
* Both types have downloadable firmware and communicate via ISA DMA.
* COSA can be also a bus-mastering device.
*
* SOFTWARE INFO
*
* The homepage of the Linux driver is at http://www.fi.muni.cz/~kas/cosa/.
* The CVS tree of Linux driver can be viewed there, as well as the
* firmware binaries and user-space utilities for downloading the firmware
* into the card and setting up the card.
*
* The Linux driver (unlike the present *BSD drivers :-) can work even
* for the COSA and SRP in one computer and allows each channel to work
* in one of the three modes (character device, Cisco HDLC, Sync PPP).
*
* AUTHOR
*
* The Linux driver was written by Jan "Yenya" Kasprzak <kas@fi.muni.cz>.
*
* You can mail me bugfixes and even success reports. I am especially
* interested in the SMP and/or muliti-channel success/failure reports
* (I wonder if I did the locking properly :-).
*
* THE AUTHOR USED THE FOLLOWING SOURCES WHEN PROGRAMMING THE DRIVER
*
* The COSA/SRP NetBSD driver by Zdenek Salvet and Ivos Cernohlavek
* The skeleton.c by Donald Becker
* The SDL Riscom/N2 driver by Mike Natale
* The Comtrol Hostess SV11 driver by Alan Cox
* The Sync PPP/Cisco HDLC layer (syncppp.c) ported to Linux by Alan Cox
*/
/*
* 5/25/1999 : Marcelo Tosatti <marcelo@conectiva.com.br>
* fixed a deadlock in cosa_sppp_open
*/
/* ---------- Headers, macros, data structures ---------- */
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/poll.h>
#include <linux/fs.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/ioport.h>
#include <linux/netdevice.h>
#include <linux/spinlock.h>
#include <linux/device.h>
#undef COSA_SLOW_IO /* for testing purposes only */
#include <asm/io.h>
#include <asm/dma.h>
#include <asm/byteorder.h>
#include <net/syncppp.h>
#include "cosa.h"
/* Maximum length of the identification string. */
#define COSA_MAX_ID_STRING 128
/* Maximum length of the channel name */
#define COSA_MAX_NAME (sizeof("cosaXXXcXXX")+1)
/* Per-channel data structure */
struct channel_data {
void *if_ptr; /* General purpose pointer (used by SPPP) */
int usage; /* Usage count; >0 for chrdev, -1 for netdev */
int num; /* Number of the channel */
struct cosa_data *cosa; /* Pointer to the per-card structure */
int txsize; /* Size of transmitted data */
char *txbuf; /* Transmit buffer */
char name[COSA_MAX_NAME]; /* channel name */
/* The HW layer interface */
/* routine called from the RX interrupt */
char *(*setup_rx)(struct channel_data *channel, int size);
/* routine called when the RX is done (from the EOT interrupt) */
int (*rx_done)(struct channel_data *channel);
/* routine called when the TX is done (from the EOT interrupt) */
int (*tx_done)(struct channel_data *channel, int size);
/* Character device parts */
struct semaphore rsem, wsem;
char *rxdata;
int rxsize;
wait_queue_head_t txwaitq, rxwaitq;
int tx_status, rx_status;
/* SPPP/HDLC device parts */
struct ppp_device pppdev;
struct sk_buff *rx_skb, *tx_skb;
struct net_device_stats stats;
};
/* cosa->firmware_status bits */
#define COSA_FW_RESET (1<<0) /* Is the ROM monitor active? */
#define COSA_FW_DOWNLOAD (1<<1) /* Is the microcode downloaded? */
#define COSA_FW_START (1<<2) /* Is the microcode running? */
struct cosa_data {
int num; /* Card number */
char name[COSA_MAX_NAME]; /* Card name - e.g "cosa0" */
unsigned int datareg, statusreg; /* I/O ports */
unsigned short irq, dma; /* IRQ and DMA number */
unsigned short startaddr; /* Firmware start address */
unsigned short busmaster; /* Use busmastering? */
int nchannels; /* # of channels on this card */
int driver_status; /* For communicating with firmware */
int firmware_status; /* Downloaded, reseted, etc. */
long int rxbitmap, txbitmap; /* Bitmap of channels who are willing to send/receive data */
long int rxtx; /* RX or TX in progress? */
int enabled;
int usage; /* usage count */
int txchan, txsize, rxsize;
struct channel_data *rxchan;
char *bouncebuf;
char *txbuf, *rxbuf;
struct channel_data *chan;
spinlock_t lock; /* For exclusive operations on this structure */
char id_string[COSA_MAX_ID_STRING]; /* ROM monitor ID string */
char *type; /* card type */
};
/*
* Define this if you want all the possible ports to be autoprobed.
* It is here but it probably is not a good idea to use this.
*/
/* #define COSA_ISA_AUTOPROBE 1 */
/*
* Character device major number. 117 was allocated for us.
* The value of 0 means to allocate a first free one.
*/
static int cosa_major = 117;
/*
* Encoding of the minor numbers:
* The lowest CARD_MINOR_BITS bits means the channel on the single card,
* the highest bits means the card number.
*/
#define CARD_MINOR_BITS 4 /* How many bits in minor number are reserved
* for the single card */
/*
* The following depends on CARD_MINOR_BITS. Unfortunately, the "MODULE_STRING"
* macro doesn't like anything other than the raw number as an argument :-(
*/
#define MAX_CARDS 16
/* #define MAX_CARDS (1 << (8-CARD_MINOR_BITS)) */
#define DRIVER_RX_READY 0x0001
#define DRIVER_TX_READY 0x0002
#define DRIVER_TXMAP_SHIFT 2
#define DRIVER_TXMAP_MASK 0x0c /* FIXME: 0xfc for 8-channel version */
/*
* for cosa->rxtx - indicates whether either transmit or receive is
* in progress. These values are mean number of the bit.
*/
#define TXBIT 0
#define RXBIT 1
#define IRQBIT 2
#define COSA_MTU 2000 /* FIXME: I don't know this exactly */
#undef DEBUG_DATA //1 /* Dump the data read or written to the channel */
#undef DEBUG_IRQS //1 /* Print the message when the IRQ is received */
#undef DEBUG_IO //1 /* Dump the I/O traffic */
#define TX_TIMEOUT (5*HZ)
/* Maybe the following should be allocated dynamically */
static struct cosa_data cosa_cards[MAX_CARDS];
static int nr_cards;
#ifdef COSA_ISA_AUTOPROBE
static int io[MAX_CARDS+1] = { 0x220, 0x228, 0x210, 0x218, 0, };
/* NOTE: DMA is not autoprobed!!! */
static int dma[MAX_CARDS+1] = { 1, 7, 1, 7, 1, 7, 1, 7, 0, };
#else
static int io[MAX_CARDS+1];
static int dma[MAX_CARDS+1];
#endif
/* IRQ can be safely autoprobed */
static int irq[MAX_CARDS+1] = { -1, -1, -1, -1, -1, -1, 0, };
/* for class stuff*/
static struct class *cosa_class;
#ifdef MODULE
module_param_array(io, int, NULL, 0);
MODULE_PARM_DESC(io, "The I/O bases of the COSA or SRP cards");
module_param_array(irq, int, NULL, 0);
MODULE_PARM_DESC(irq, "The IRQ lines of the COSA or SRP cards");
module_param_array(dma, int, NULL, 0);
MODULE_PARM_DESC(dma, "The DMA channels of the COSA or SRP cards");
MODULE_AUTHOR("Jan \"Yenya\" Kasprzak, <kas@fi.muni.cz>");
MODULE_DESCRIPTION("Modular driver for the COSA or SRP synchronous card");
MODULE_LICENSE("GPL");
#endif
/* I use this mainly for testing purposes */
#ifdef COSA_SLOW_IO
#define cosa_outb outb_p
#define cosa_outw outw_p
#define cosa_inb inb_p
#define cosa_inw inw_p
#else
#define cosa_outb outb
#define cosa_outw outw
#define cosa_inb inb
#define cosa_inw inw
#endif
#define is_8bit(cosa) (!(cosa->datareg & 0x08))
#define cosa_getstatus(cosa) (cosa_inb(cosa->statusreg))
#define cosa_putstatus(cosa, stat) (cosa_outb(stat, cosa->statusreg))
#define cosa_getdata16(cosa) (cosa_inw(cosa->datareg))
#define cosa_getdata8(cosa) (cosa_inb(cosa->datareg))
#define cosa_putdata16(cosa, dt) (cosa_outw(dt, cosa->datareg))
#define cosa_putdata8(cosa, dt) (cosa_outb(dt, cosa->datareg))
/* Initialization stuff */
static int cosa_probe(int ioaddr, int irq, int dma);
/* HW interface */
static void cosa_enable_rx(struct channel_data *chan);
static void cosa_disable_rx(struct channel_data *chan);
static int cosa_start_tx(struct channel_data *channel, char *buf, int size);
static void cosa_kick(struct cosa_data *cosa);
static int cosa_dma_able(struct channel_data *chan, char *buf, int data);
/* SPPP/HDLC stuff */
static void sppp_channel_init(struct channel_data *chan);
static void sppp_channel_delete(struct channel_data *chan);
static int cosa_sppp_open(struct net_device *d);
static int cosa_sppp_close(struct net_device *d);
static void cosa_sppp_timeout(struct net_device *d);
static int cosa_sppp_tx(struct sk_buff *skb, struct net_device *d);
static char *sppp_setup_rx(struct channel_data *channel, int size);
static int sppp_rx_done(struct channel_data *channel);
static int sppp_tx_done(struct channel_data *channel, int size);
static int cosa_sppp_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
static struct net_device_stats *cosa_net_stats(struct net_device *dev);
/* Character device */
static void chardev_channel_init(struct channel_data *chan);
static char *chrdev_setup_rx(struct channel_data *channel, int size);
static int chrdev_rx_done(struct channel_data *channel);
static int chrdev_tx_done(struct channel_data *channel, int size);
static ssize_t cosa_read(struct file *file,
char __user *buf, size_t count, loff_t *ppos);
static ssize_t cosa_write(struct file *file,
const char __user *buf, size_t count, loff_t *ppos);
static unsigned int cosa_poll(struct file *file, poll_table *poll);
static int cosa_open(struct inode *inode, struct file *file);
static int cosa_release(struct inode *inode, struct file *file);
static int cosa_chardev_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg);
#ifdef COSA_FASYNC_WORKING
static int cosa_fasync(struct inode *inode, struct file *file, int on);
#endif
static const struct file_operations cosa_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.read = cosa_read,
.write = cosa_write,
.poll = cosa_poll,
.ioctl = cosa_chardev_ioctl,
.open = cosa_open,
.release = cosa_release,
#ifdef COSA_FASYNC_WORKING
.fasync = cosa_fasync,
#endif
};
/* Ioctls */
static int cosa_start(struct cosa_data *cosa, int address);
static int cosa_reset(struct cosa_data *cosa);
static int cosa_download(struct cosa_data *cosa, void __user *a);
static int cosa_readmem(struct cosa_data *cosa, void __user *a);
/* COSA/SRP ROM monitor */
static int download(struct cosa_data *cosa, const char __user *data, int addr, int len);
static int startmicrocode(struct cosa_data *cosa, int address);
static int readmem(struct cosa_data *cosa, char __user *data, int addr, int len);
static int cosa_reset_and_read_id(struct cosa_data *cosa, char *id);
/* Auxilliary functions */
static int get_wait_data(struct cosa_data *cosa);
static int put_wait_data(struct cosa_data *cosa, int data);
static int puthexnumber(struct cosa_data *cosa, int number);
static void put_driver_status(struct cosa_data *cosa);
static void put_driver_status_nolock(struct cosa_data *cosa);
/* Interrupt handling */
static irqreturn_t cosa_interrupt(int irq, void *cosa);
/* I/O ops debugging */
#ifdef DEBUG_IO
static void debug_data_in(struct cosa_data *cosa, int data);
static void debug_data_out(struct cosa_data *cosa, int data);
static void debug_data_cmd(struct cosa_data *cosa, int data);
static void debug_status_in(struct cosa_data *cosa, int status);
static void debug_status_out(struct cosa_data *cosa, int status);
#endif
/* ---------- Initialization stuff ---------- */
static int __init cosa_init(void)
{
int i, err = 0;
printk(KERN_INFO "cosa v1.08 (c) 1997-2000 Jan Kasprzak <kas@fi.muni.cz>\n");
#ifdef CONFIG_SMP
printk(KERN_INFO "cosa: SMP found. Please mail any success/failure reports to the author.\n");
#endif
if (cosa_major > 0) {
if (register_chrdev(cosa_major, "cosa", &cosa_fops)) {
printk(KERN_WARNING "cosa: unable to get major %d\n",
cosa_major);
err = -EIO;
goto out;
}
} else {
if (!(cosa_major=register_chrdev(0, "cosa", &cosa_fops))) {
printk(KERN_WARNING "cosa: unable to register chardev\n");
err = -EIO;
goto out;
}
}
for (i=0; i<MAX_CARDS; i++)
cosa_cards[i].num = -1;
for (i=0; io[i] != 0 && i < MAX_CARDS; i++)
cosa_probe(io[i], irq[i], dma[i]);
if (!nr_cards) {
printk(KERN_WARNING "cosa: no devices found.\n");
unregister_chrdev(cosa_major, "cosa");
err = -ENODEV;
goto out;
}
cosa_class = class_create(THIS_MODULE, "cosa");
if (IS_ERR(cosa_class)) {
err = PTR_ERR(cosa_class);
goto out_chrdev;
}
for (i=0; i<nr_cards; i++) {
class_device_create(cosa_class, NULL, MKDEV(cosa_major, i),
NULL, "cosa%d", i);
}
err = 0;
goto out;
out_chrdev:
unregister_chrdev(cosa_major, "cosa");
out:
return err;
}
module_init(cosa_init);
static void __exit cosa_exit(void)
{
struct cosa_data *cosa;
int i;
printk(KERN_INFO "Unloading the cosa module\n");
for (i=0; i<nr_cards; i++)
class_device_destroy(cosa_class, MKDEV(cosa_major, i));
class_destroy(cosa_class);
for (cosa=cosa_cards; nr_cards--; cosa++) {
/* Clean up the per-channel data */
for (i=0; i<cosa->nchannels; i++) {
/* Chardev driver has no alloc'd per-channel data */
sppp_channel_delete(cosa->chan+i);
}
/* Clean up the per-card data */
kfree(cosa->chan);
kfree(cosa->bouncebuf);
free_irq(cosa->irq, cosa);
free_dma(cosa->dma);
release_region(cosa->datareg,is_8bit(cosa)?2:4);
}
unregister_chrdev(cosa_major, "cosa");
}
module_exit(cosa_exit);
/*
* This function should register all the net devices needed for the
* single channel.
*/
static __inline__ void channel_init(struct channel_data *chan)
{
sprintf(chan->name, "cosa%dc%d", chan->cosa->num, chan->num);
/* Initialize the chardev data structures */
chardev_channel_init(chan);
/* Register the sppp interface */
sppp_channel_init(chan);
}
static int cosa_probe(int base, int irq, int dma)
{
struct cosa_data *cosa = cosa_cards+nr_cards;
int i, err = 0;
memset(cosa, 0, sizeof(struct cosa_data));
/* Checking validity of parameters: */
/* IRQ should be 2-7 or 10-15; negative IRQ means autoprobe */
if ((irq >= 0 && irq < 2) || irq > 15 || (irq < 10 && irq > 7)) {
printk (KERN_INFO "cosa_probe: invalid IRQ %d\n", irq);
return -1;
}
/* I/O address should be between 0x100 and 0x3ff and should be
* multiple of 8. */
if (base < 0x100 || base > 0x3ff || base & 0x7) {
printk (KERN_INFO "cosa_probe: invalid I/O address 0x%x\n",
base);
return -1;
}
/* DMA should be 0,1 or 3-7 */
if (dma < 0 || dma == 4 || dma > 7) {
printk (KERN_INFO "cosa_probe: invalid DMA %d\n", dma);
return -1;
}
/* and finally, on 16-bit COSA DMA should be 4-7 and
* I/O base should not be multiple of 0x10 */
if (((base & 0x8) && dma < 4) || (!(base & 0x8) && dma > 3)) {
printk (KERN_INFO "cosa_probe: 8/16 bit base and DMA mismatch"
" (base=0x%x, dma=%d)\n", base, dma);
return -1;
}
cosa->dma = dma;
cosa->datareg = base;
cosa->statusreg = is_8bit(cosa)?base+1:base+2;
spin_lock_init(&cosa->lock);
if (!request_region(base, is_8bit(cosa)?2:4,"cosa"))
return -1;
if (cosa_reset_and_read_id(cosa, cosa->id_string) < 0) {
printk(KERN_DEBUG "cosa: probe at 0x%x failed.\n", base);
err = -1;
goto err_out;
}
/* Test the validity of identification string */
if (!strncmp(cosa->id_string, "SRP", 3))
cosa->type = "srp";
else if (!strncmp(cosa->id_string, "COSA", 4))
cosa->type = is_8bit(cosa)? "cosa8": "cosa16";
else {
/* Print a warning only if we are not autoprobing */
#ifndef COSA_ISA_AUTOPROBE
printk(KERN_INFO "cosa: valid signature not found at 0x%x.\n",
base);
#endif
err = -1;
goto err_out;
}
/* Update the name of the region now we know the type of card */
release_region(base, is_8bit(cosa)?2:4);
if (!request_region(base, is_8bit(cosa)?2:4, cosa->type)) {
printk(KERN_DEBUG "cosa: changing name at 0x%x failed.\n", base);
return -1;
}
/* Now do IRQ autoprobe */
if (irq < 0) {
unsigned long irqs;
/* printk(KERN_INFO "IRQ autoprobe\n"); */
irqs = probe_irq_on();
/*
* Enable interrupt on tx buffer empty (it sure is)
* really sure ?
* FIXME: When this code is not used as module, we should
* probably call udelay() instead of the interruptible sleep.
*/
set_current_state(TASK_INTERRUPTIBLE);
cosa_putstatus(cosa, SR_TX_INT_ENA);
schedule_timeout(30);
irq = probe_irq_off(irqs);
/* Disable all IRQs from the card */
cosa_putstatus(cosa, 0);
/* Empty the received data register */
cosa_getdata8(cosa);
if (irq < 0) {
printk (KERN_INFO "cosa IRQ autoprobe: multiple interrupts obtained (%d, board at 0x%x)\n",
irq, cosa->datareg);
err = -1;
goto err_out;
}
if (irq == 0) {
printk (KERN_INFO "cosa IRQ autoprobe: no interrupt obtained (board at 0x%x)\n",
cosa->datareg);
/* return -1; */
}
}
cosa->irq = irq;
cosa->num = nr_cards;
cosa->usage = 0;
cosa->nchannels = 2; /* FIXME: how to determine this? */
if (request_irq(cosa->irq, cosa_interrupt, 0, cosa->type, cosa)) {
err = -1;
goto err_out;
}
if (request_dma(cosa->dma, cosa->type)) {
err = -1;
goto err_out1;
}
cosa->bouncebuf = kmalloc(COSA_MTU, GFP_KERNEL|GFP_DMA);
if (!cosa->bouncebuf) {
err = -ENOMEM;
goto err_out2;
}
sprintf(cosa->name, "cosa%d", cosa->num);
/* Initialize the per-channel data */
cosa->chan = kcalloc(cosa->nchannels, sizeof(struct channel_data), GFP_KERNEL);
if (!cosa->chan) {
err = -ENOMEM;
goto err_out3;
}
for (i=0; i<cosa->nchannels; i++) {
cosa->chan[i].cosa = cosa;
cosa->chan[i].num = i;
channel_init(cosa->chan+i);
}
printk (KERN_INFO "cosa%d: %s (%s at 0x%x irq %d dma %d), %d channels\n",
cosa->num, cosa->id_string, cosa->type,
cosa->datareg, cosa->irq, cosa->dma, cosa->nchannels);
return nr_cards++;
err_out3:
kfree(cosa->bouncebuf);
err_out2:
free_dma(cosa->dma);
err_out1:
free_irq(cosa->irq, cosa);
err_out:
release_region(cosa->datareg,is_8bit(cosa)?2:4);
printk(KERN_NOTICE "cosa%d: allocating resources failed\n",
cosa->num);
return err;
}
/*---------- SPPP/HDLC netdevice ---------- */
static void cosa_setup(struct net_device *d)
{
d->open = cosa_sppp_open;
d->stop = cosa_sppp_close;
d->hard_start_xmit = cosa_sppp_tx;
d->do_ioctl = cosa_sppp_ioctl;
d->get_stats = cosa_net_stats;
d->tx_timeout = cosa_sppp_timeout;
d->watchdog_timeo = TX_TIMEOUT;
}
static void sppp_channel_init(struct channel_data *chan)
{
struct net_device *d;
chan->if_ptr = &chan->pppdev;
d = alloc_netdev(0, chan->name, cosa_setup);
if (!d) {
printk(KERN_WARNING "%s: alloc_netdev failed.\n", chan->name);
return;
}
chan->pppdev.dev = d;
d->base_addr = chan->cosa->datareg;
d->irq = chan->cosa->irq;
d->dma = chan->cosa->dma;
d->priv = chan;
sppp_attach(&chan->pppdev);
if (register_netdev(d)) {
printk(KERN_WARNING "%s: register_netdev failed.\n", d->name);
sppp_detach(d);
free_netdev(d);
chan->pppdev.dev = NULL;
return;
}
}
static void sppp_channel_delete(struct channel_data *chan)
{
unregister_netdev(chan->pppdev.dev);
sppp_detach(chan->pppdev.dev);
free_netdev(chan->pppdev.dev);
chan->pppdev.dev = NULL;
}
static int cosa_sppp_open(struct net_device *d)
{
struct channel_data *chan = d->priv;
int err;
unsigned long flags;
if (!(chan->cosa->firmware_status & COSA_FW_START)) {
printk(KERN_NOTICE "%s: start the firmware first (status %d)\n",
chan->cosa->name, chan->cosa->firmware_status);
return -EPERM;
}
spin_lock_irqsave(&chan->cosa->lock, flags);
if (chan->usage != 0) {
printk(KERN_WARNING "%s: sppp_open called with usage count %d\n",
chan->name, chan->usage);
spin_unlock_irqrestore(&chan->cosa->lock, flags);
return -EBUSY;
}
chan->setup_rx = sppp_setup_rx;
chan->tx_done = sppp_tx_done;
chan->rx_done = sppp_rx_done;
chan->usage=-1;
chan->cosa->usage++;
spin_unlock_irqrestore(&chan->cosa->lock, flags);
err = sppp_open(d);
if (err) {
spin_lock_irqsave(&chan->cosa->lock, flags);
chan->usage=0;
chan->cosa->usage--;
spin_unlock_irqrestore(&chan->cosa->lock, flags);
return err;
}
netif_start_queue(d);
cosa_enable_rx(chan);
return 0;
}
static int cosa_sppp_tx(struct sk_buff *skb, struct net_device *dev)
{
struct channel_data *chan = dev->priv;
netif_stop_queue(dev);
chan->tx_skb = skb;
cosa_start_tx(chan, skb->data, skb->len);
return 0;
}
static void cosa_sppp_timeout(struct net_device *dev)
{
struct channel_data *chan = dev->priv;
if (test_bit(RXBIT, &chan->cosa->rxtx)) {
chan->stats.rx_errors++;
chan->stats.rx_missed_errors++;
} else {
chan->stats.tx_errors++;
chan->stats.tx_aborted_errors++;
}
cosa_kick(chan->cosa);
if (chan->tx_skb) {
dev_kfree_skb(chan->tx_skb);
chan->tx_skb = NULL;
}
netif_wake_queue(dev);
}
static int cosa_sppp_close(struct net_device *d)
{
struct channel_data *chan = d->priv;
unsigned long flags;
netif_stop_queue(d);
sppp_close(d);
cosa_disable_rx(chan);
spin_lock_irqsave(&chan->cosa->lock, flags);
if (chan->rx_skb) {
kfree_skb(chan->rx_skb);
chan->rx_skb = NULL;
}
if (chan->tx_skb) {
kfree_skb(chan->tx_skb);
chan->tx_skb = NULL;
}
chan->usage=0;
chan->cosa->usage--;
spin_unlock_irqrestore(&chan->cosa->lock, flags);
return 0;
}
static char *sppp_setup_rx(struct channel_data *chan, int size)
{
/*
* We can safely fall back to non-dma-able memory, because we have
* the cosa->bouncebuf pre-allocated.
*/
if (chan->rx_skb)
kfree_skb(chan->rx_skb);
chan->rx_skb = dev_alloc_skb(size);
if (chan->rx_skb == NULL) {
printk(KERN_NOTICE "%s: Memory squeeze, dropping packet\n",
chan->name);
chan->stats.rx_dropped++;
return NULL;
}
chan->pppdev.dev->trans_start = jiffies;
return skb_put(chan->rx_skb, size);
}
static int sppp_rx_done(struct channel_data *chan)
{
if (!chan->rx_skb) {
printk(KERN_WARNING "%s: rx_done with empty skb!\n",
chan->name);
chan->stats.rx_errors++;
chan->stats.rx_frame_errors++;
return 0;
}
chan->rx_skb->protocol = htons(ETH_P_WAN_PPP);
chan->rx_skb->dev = chan->pppdev.dev;
skb_reset_mac_header(chan->rx_skb);
chan->stats.rx_packets++;
chan->stats.rx_bytes += chan->cosa->rxsize;
netif_rx(chan->rx_skb);
chan->rx_skb = NULL;
chan->pppdev.dev->last_rx = jiffies;
return 0;
}
/* ARGSUSED */
static int sppp_tx_done(struct channel_data *chan, int size)
{
if (!chan->tx_skb) {
printk(KERN_WARNING "%s: tx_done with empty skb!\n",
chan->name);
chan->stats.tx_errors++;
chan->stats.tx_aborted_errors++;
return 1;
}
dev_kfree_skb_irq(chan->tx_skb);
chan->tx_skb = NULL;
chan->stats.tx_packets++;
chan->stats.tx_bytes += size;
netif_wake_queue(chan->pppdev.dev);
return 1;
}
static struct net_device_stats *cosa_net_stats(struct net_device *dev)
{
struct channel_data *chan = dev->priv;
return &chan->stats;
}
/*---------- Character device ---------- */
static void chardev_channel_init(struct channel_data *chan)
{
init_MUTEX(&chan->rsem);
init_MUTEX(&chan->wsem);
}
static ssize_t cosa_read(struct file *file,
char __user *buf, size_t count, loff_t *ppos)
{
DECLARE_WAITQUEUE(wait, current);
unsigned long flags;
struct channel_data *chan = file->private_data;
struct cosa_data *cosa = chan->cosa;
char *kbuf;
if (!(cosa->firmware_status & COSA_FW_START)) {
printk(KERN_NOTICE "%s: start the firmware first (status %d)\n",
cosa->name, cosa->firmware_status);
return -EPERM;
}
if (down_interruptible(&chan->rsem))
return -ERESTARTSYS;
if ((chan->rxdata = kmalloc(COSA_MTU, GFP_DMA|GFP_KERNEL)) == NULL) {
printk(KERN_INFO "%s: cosa_read() - OOM\n", cosa->name);
up(&chan->rsem);
return -ENOMEM;
}
chan->rx_status = 0;
cosa_enable_rx(chan);
spin_lock_irqsave(&cosa->lock, flags);
add_wait_queue(&chan->rxwaitq, &wait);
while(!chan->rx_status) {
current->state = TASK_INTERRUPTIBLE;
spin_unlock_irqrestore(&cosa->lock, flags);
schedule();
spin_lock_irqsave(&cosa->lock, flags);
if (signal_pending(current) && chan->rx_status == 0) {
chan->rx_status = 1;
remove_wait_queue(&chan->rxwaitq, &wait);
current->state = TASK_RUNNING;
spin_unlock_irqrestore(&cosa->lock, flags);
up(&chan->rsem);
return -ERESTARTSYS;
}
}
remove_wait_queue(&chan->rxwaitq, &wait);
current->state = TASK_RUNNING;
kbuf = chan->rxdata;
count = chan->rxsize;
spin_unlock_irqrestore(&cosa->lock, flags);
up(&chan->rsem);
if (copy_to_user(buf, kbuf, count)) {
kfree(kbuf);
return -EFAULT;
}
kfree(kbuf);
return count;
}
static char *chrdev_setup_rx(struct channel_data *chan, int size)
{
/* Expect size <= COSA_MTU */
chan->rxsize = size;
return chan->rxdata;
}
static int chrdev_rx_done(struct channel_data *chan)
{
if (chan->rx_status) { /* Reader has died */
kfree(chan->rxdata);
up(&chan->wsem);
}
chan->rx_status = 1;
wake_up_interruptible(&chan->rxwaitq);
return 1;
}
static ssize_t cosa_write(struct file *file,
const char __user *buf, size_t count, loff_t *ppos)
{
DECLARE_WAITQUEUE(wait, current);
struct channel_data *chan = file->private_data;
struct cosa_data *cosa = chan->cosa;
unsigned long flags;
char *kbuf;
if (!(cosa->firmware_status & COSA_FW_START)) {
printk(KERN_NOTICE "%s: start the firmware first (status %d)\n",
cosa->name, cosa->firmware_status);
return -EPERM;
}
if (down_interruptible(&chan->wsem))
return -ERESTARTSYS;
if (count > COSA_MTU)
count = COSA_MTU;
/* Allocate the buffer */
if ((kbuf = kmalloc(count, GFP_KERNEL|GFP_DMA)) == NULL) {
printk(KERN_NOTICE "%s: cosa_write() OOM - dropping packet\n",
cosa->name);
up(&chan->wsem);
return -ENOMEM;
}
if (copy_from_user(kbuf, buf, count)) {
up(&chan->wsem);
kfree(kbuf);
return -EFAULT;
}
chan->tx_status=0;
cosa_start_tx(chan, kbuf, count);
spin_lock_irqsave(&cosa->lock, flags);
add_wait_queue(&chan->txwaitq, &wait);
while(!chan->tx_status) {
current->state = TASK_INTERRUPTIBLE;
spin_unlock_irqrestore(&cosa->lock, flags);
schedule();
spin_lock_irqsave(&cosa->lock, flags);
if (signal_pending(current) && chan->tx_status == 0) {
chan->tx_status = 1;
remove_wait_queue(&chan->txwaitq, &wait);
current->state = TASK_RUNNING;
chan->tx_status = 1;
spin_unlock_irqrestore(&cosa->lock, flags);
return -ERESTARTSYS;
}
}
remove_wait_queue(&chan->txwaitq, &wait);
current->state = TASK_RUNNING;
up(&chan->wsem);
spin_unlock_irqrestore(&cosa->lock, flags);
kfree(kbuf);
return count;
}
static int chrdev_tx_done(struct channel_data *chan, int size)
{
if (chan->tx_status) { /* Writer was interrupted */
kfree(chan->txbuf);
up(&chan->wsem);
}
chan->tx_status = 1;
wake_up_interruptible(&chan->txwaitq);
return 1;
}
static unsigned int cosa_poll(struct file *file, poll_table *poll)
{
printk(KERN_INFO "cosa_poll is here\n");
return 0;
}
static int cosa_open(struct inode *inode, struct file *file)
{
struct cosa_data *cosa;
struct channel_data *chan;
unsigned long flags;
int n;
if ((n=iminor(file->f_path.dentry->d_inode)>>CARD_MINOR_BITS)
>= nr_cards)
return -ENODEV;
cosa = cosa_cards+n;
if ((n=iminor(file->f_path.dentry->d_inode)
& ((1<<CARD_MINOR_BITS)-1)) >= cosa->nchannels)
return -ENODEV;
chan = cosa->chan + n;
file->private_data = chan;
spin_lock_irqsave(&cosa->lock, flags);
if (chan->usage < 0) { /* in netdev mode */
spin_unlock_irqrestore(&cosa->lock, flags);
return -EBUSY;
}
cosa->usage++;
chan->usage++;
chan->tx_done = chrdev_tx_done;
chan->setup_rx = chrdev_setup_rx;
chan->rx_done = chrdev_rx_done;
spin_unlock_irqrestore(&cosa->lock, flags);
return 0;
}
static int cosa_release(struct inode *inode, struct file *file)
{
struct channel_data *channel = file->private_data;
struct cosa_data *cosa;
unsigned long flags;
cosa = channel->cosa;
spin_lock_irqsave(&cosa->lock, flags);
cosa->usage--;
channel->usage--;
spin_unlock_irqrestore(&cosa->lock, flags);
return 0;
}
#ifdef COSA_FASYNC_WORKING
static struct fasync_struct *fasync[256] = { NULL, };
/* To be done ... */
static int cosa_fasync(struct inode *inode, struct file *file, int on)
{
int port = iminor(inode);
int rv = fasync_helper(inode, file, on, &fasync[port]);
return rv < 0 ? rv : 0;
}
#endif
/* ---------- Ioctls ---------- */
/*
* Ioctl subroutines can safely be made inline, because they are called
* only from cosa_ioctl().
*/
static inline int cosa_reset(struct cosa_data *cosa)
{
char idstring[COSA_MAX_ID_STRING];
if (cosa->usage > 1)
printk(KERN_INFO "cosa%d: WARNING: reset requested with cosa->usage > 1 (%d). Odd things may happen.\n",
cosa->num, cosa->usage);
cosa->firmware_status &= ~(COSA_FW_RESET|COSA_FW_START);
if (cosa_reset_and_read_id(cosa, idstring) < 0) {
printk(KERN_NOTICE "cosa%d: reset failed\n", cosa->num);
return -EIO;
}
printk(KERN_INFO "cosa%d: resetting device: %s\n", cosa->num,
idstring);
cosa->firmware_status |= COSA_FW_RESET;
return 0;
}
/* High-level function to download data into COSA memory. Calls download() */
static inline int cosa_download(struct cosa_data *cosa, void __user *arg)
{
struct cosa_download d;
int i;
if (cosa->usage > 1)
printk(KERN_INFO "%s: WARNING: download of microcode requested with cosa->usage > 1 (%d). Odd things may happen.\n",
cosa->name, cosa->usage);
if (!(cosa->firmware_status & COSA_FW_RESET)) {
printk(KERN_NOTICE "%s: reset the card first (status %d).\n",
cosa->name, cosa->firmware_status);
return -EPERM;
}
if (copy_from_user(&d, arg, sizeof(d)))
return -EFAULT;
if (d.addr < 0 || d.addr > COSA_MAX_FIRMWARE_SIZE)
return -EINVAL;
if (d.len < 0 || d.len > COSA_MAX_FIRMWARE_SIZE)
return -EINVAL;
/* If something fails, force the user to reset the card */
cosa->firmware_status &= ~(COSA_FW_RESET|COSA_FW_DOWNLOAD);
i = download(cosa, d.code, d.len, d.addr);
if (i < 0) {
printk(KERN_NOTICE "cosa%d: microcode download failed: %d\n",
cosa->num, i);
return -EIO;
}
printk(KERN_INFO "cosa%d: downloading microcode - 0x%04x bytes at 0x%04x\n",
cosa->num, d.len, d.addr);
cosa->firmware_status |= COSA_FW_RESET|COSA_FW_DOWNLOAD;
return 0;
}
/* High-level function to read COSA memory. Calls readmem() */
static inline int cosa_readmem(struct cosa_data *cosa, void __user *arg)
{
struct cosa_download d;
int i;
if (cosa->usage > 1)
printk(KERN_INFO "cosa%d: WARNING: readmem requested with "
"cosa->usage > 1 (%d). Odd things may happen.\n",
cosa->num, cosa->usage);
if (!(cosa->firmware_status & COSA_FW_RESET)) {
printk(KERN_NOTICE "%s: reset the card first (status %d).\n",
cosa->name, cosa->firmware_status);
return -EPERM;
}
if (copy_from_user(&d, arg, sizeof(d)))
return -EFAULT;
/* If something fails, force the user to reset the card */
cosa->firmware_status &= ~COSA_FW_RESET;
i = readmem(cosa, d.code, d.len, d.addr);
if (i < 0) {
printk(KERN_NOTICE "cosa%d: reading memory failed: %d\n",
cosa->num, i);
return -EIO;
}
printk(KERN_INFO "cosa%d: reading card memory - 0x%04x bytes at 0x%04x\n",
cosa->num, d.len, d.addr);
cosa->firmware_status |= COSA_FW_RESET;
return 0;
}
/* High-level function to start microcode. Calls startmicrocode(). */
static inline int cosa_start(struct cosa_data *cosa, int address)
{
int i;
if (cosa->usage > 1)
printk(KERN_INFO "cosa%d: WARNING: start microcode requested with cosa->usage > 1 (%d). Odd things may happen.\n",
cosa->num, cosa->usage);
if ((cosa->firmware_status & (COSA_FW_RESET|COSA_FW_DOWNLOAD))
!= (COSA_FW_RESET|COSA_FW_DOWNLOAD)) {
printk(KERN_NOTICE "%s: download the microcode and/or reset the card first (status %d).\n",
cosa->name, cosa->firmware_status);
return -EPERM;
}
cosa->firmware_status &= ~COSA_FW_RESET;
if ((i=startmicrocode(cosa, address)) < 0) {
printk(KERN_NOTICE "cosa%d: start microcode at 0x%04x failed: %d\n",
cosa->num, address, i);
return -EIO;
}
printk(KERN_INFO "cosa%d: starting microcode at 0x%04x\n",
cosa->num, address);
cosa->startaddr = address;
cosa->firmware_status |= COSA_FW_START;
return 0;
}
/* Buffer of size at least COSA_MAX_ID_STRING is expected */
static inline int cosa_getidstr(struct cosa_data *cosa, char __user *string)
{
int l = strlen(cosa->id_string)+1;
if (copy_to_user(string, cosa->id_string, l))
return -EFAULT;
return l;
}
/* Buffer of size at least COSA_MAX_ID_STRING is expected */
static inline int cosa_gettype(struct cosa_data *cosa, char __user *string)
{
int l = strlen(cosa->type)+1;
if (copy_to_user(string, cosa->type, l))
return -EFAULT;
return l;
}
static int cosa_ioctl_common(struct cosa_data *cosa,
struct channel_data *channel, unsigned int cmd, unsigned long arg)
{
void __user *argp = (void __user *)arg;
switch(cmd) {
case COSAIORSET: /* Reset the device */
if (!capable(CAP_NET_ADMIN))
return -EACCES;
return cosa_reset(cosa);
case COSAIOSTRT: /* Start the firmware */
if (!capable(CAP_SYS_RAWIO))
return -EACCES;
return cosa_start(cosa, arg);
case COSAIODOWNLD: /* Download the firmware */
if (!capable(CAP_SYS_RAWIO))
return -EACCES;
return cosa_download(cosa, argp);
case COSAIORMEM:
if (!capable(CAP_SYS_RAWIO))
return -EACCES;
return cosa_readmem(cosa, argp);
case COSAIORTYPE:
return cosa_gettype(cosa, argp);
case COSAIORIDSTR:
return cosa_getidstr(cosa, argp);
case COSAIONRCARDS:
return nr_cards;
case COSAIONRCHANS:
return cosa->nchannels;
case COSAIOBMSET:
if (!capable(CAP_SYS_RAWIO))
return -EACCES;
if (is_8bit(cosa))
return -EINVAL;
if (arg != COSA_BM_OFF && arg != COSA_BM_ON)
return -EINVAL;
cosa->busmaster = arg;
return 0;
case COSAIOBMGET:
return cosa->busmaster;
}
return -ENOIOCTLCMD;
}
static int cosa_sppp_ioctl(struct net_device *dev, struct ifreq *ifr,
int cmd)
{
int rv;
struct channel_data *chan = dev->priv;
rv = cosa_ioctl_common(chan->cosa, chan, cmd, (unsigned long)ifr->ifr_data);
if (rv == -ENOIOCTLCMD) {
return sppp_do_ioctl(dev, ifr, cmd);
}
return rv;
}
static int cosa_chardev_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
{
struct channel_data *channel = file->private_data;
struct cosa_data *cosa = channel->cosa;
return cosa_ioctl_common(cosa, channel, cmd, arg);
}
/*---------- HW layer interface ---------- */
/*
* The higher layer can bind itself to the HW layer by setting the callbacks
* in the channel_data structure and by using these routines.
*/
static void cosa_enable_rx(struct channel_data *chan)
{
struct cosa_data *cosa = chan->cosa;
if (!test_and_set_bit(chan->num, &cosa->rxbitmap))
put_driver_status(cosa);
}
static void cosa_disable_rx(struct channel_data *chan)
{
struct cosa_data *cosa = chan->cosa;
if (test_and_clear_bit(chan->num, &cosa->rxbitmap))
put_driver_status(cosa);
}
/*
* FIXME: This routine probably should check for cosa_start_tx() called when
* the previous transmit is still unfinished. In this case the non-zero
* return value should indicate to the caller that the queuing(sp?) up
* the transmit has failed.
*/
static int cosa_start_tx(struct channel_data *chan, char *buf, int len)
{
struct cosa_data *cosa = chan->cosa;
unsigned long flags;
#ifdef DEBUG_DATA
int i;
printk(KERN_INFO "cosa%dc%d: starting tx(0x%x)", chan->cosa->num,
chan->num, len);
for (i=0; i<len; i++)
printk(" %02x", buf[i]&0xff);
printk("\n");
#endif
spin_lock_irqsave(&cosa->lock, flags);
chan->txbuf = buf;
chan->txsize = len;
if (len > COSA_MTU)
chan->txsize = COSA_MTU;
spin_unlock_irqrestore(&cosa->lock, flags);
/* Tell the firmware we are ready */
set_bit(chan->num, &cosa->txbitmap);
put_driver_status(cosa);
return 0;
}
static void put_driver_status(struct cosa_data *cosa)
{
unsigned long flags;
int status;
spin_lock_irqsave(&cosa->lock, flags);
status = (cosa->rxbitmap ? DRIVER_RX_READY : 0)
| (cosa->txbitmap ? DRIVER_TX_READY : 0)
| (cosa->txbitmap? ~(cosa->txbitmap<<DRIVER_TXMAP_SHIFT)
&DRIVER_TXMAP_MASK : 0);
if (!cosa->rxtx) {
if (cosa->rxbitmap|cosa->txbitmap) {
if (!cosa->enabled) {
cosa_putstatus(cosa, SR_RX_INT_ENA);
#ifdef DEBUG_IO
debug_status_out(cosa, SR_RX_INT_ENA);
#endif
cosa->enabled = 1;
}
} else if (cosa->enabled) {
cosa->enabled = 0;
cosa_putstatus(cosa, 0);
#ifdef DEBUG_IO
debug_status_out(cosa, 0);
#endif
}
cosa_putdata8(cosa, status);
#ifdef DEBUG_IO
debug_data_cmd(cosa, status);
#endif
}
spin_unlock_irqrestore(&cosa->lock, flags);
}
static void put_driver_status_nolock(struct cosa_data *cosa)
{
int status;
status = (cosa->rxbitmap ? DRIVER_RX_READY : 0)
| (cosa->txbitmap ? DRIVER_TX_READY : 0)
| (cosa->txbitmap? ~(cosa->txbitmap<<DRIVER_TXMAP_SHIFT)
&DRIVER_TXMAP_MASK : 0);
if (cosa->rxbitmap|cosa->txbitmap) {
cosa_putstatus(cosa, SR_RX_INT_ENA);
#ifdef DEBUG_IO
debug_status_out(cosa, SR_RX_INT_ENA);
#endif
cosa->enabled = 1;
} else {
cosa_putstatus(cosa, 0);
#ifdef DEBUG_IO
debug_status_out(cosa, 0);
#endif
cosa->enabled = 0;
}
cosa_putdata8(cosa, status);
#ifdef DEBUG_IO
debug_data_cmd(cosa, status);
#endif
}
/*
* The "kickme" function: When the DMA times out, this is called to
* clean up the driver status.
* FIXME: Preliminary support, the interface is probably wrong.
*/
static void cosa_kick(struct cosa_data *cosa)
{
unsigned long flags, flags1;
char *s = "(probably) IRQ";
if (test_bit(RXBIT, &cosa->rxtx))
s = "RX DMA";
if (test_bit(TXBIT, &cosa->rxtx))
s = "TX DMA";
printk(KERN_INFO "%s: %s timeout - restarting.\n", cosa->name, s);
spin_lock_irqsave(&cosa->lock, flags);
cosa->rxtx = 0;
flags1 = claim_dma_lock();
disable_dma(cosa->dma);
clear_dma_ff(cosa->dma);
release_dma_lock(flags1);
/* FIXME: Anything else? */
udelay(100);
cosa_putstatus(cosa, 0);
udelay(100);
(void) cosa_getdata8(cosa);
udelay(100);
cosa_putdata8(cosa, 0);
udelay(100);
put_driver_status_nolock(cosa);
spin_unlock_irqrestore(&cosa->lock, flags);
}
/*
* Check if the whole buffer is DMA-able. It means it is below the 16M of
* physical memory and doesn't span the 64k boundary. For now it seems
* SKB's never do this, but we'll check this anyway.
*/
static int cosa_dma_able(struct channel_data *chan, char *buf, int len)
{
static int count;
unsigned long b = (unsigned long)buf;
if (b+len >= MAX_DMA_ADDRESS)
return 0;
if ((b^ (b+len)) & 0x10000) {
if (count++ < 5)
printk(KERN_INFO "%s: packet spanning a 64k boundary\n",
chan->name);
return 0;
}
return 1;
}
/* ---------- The SRP/COSA ROM monitor functions ---------- */
/*
* Downloading SRP microcode: say "w" to SRP monitor, it answers by "w=",
* drivers need to say 4-digit hex number meaning start address of the microcode
* separated by a single space. Monitor replies by saying " =". Now driver
* has to write 4-digit hex number meaning the last byte address ended
* by a single space. Monitor has to reply with a space. Now the download
* begins. After the download monitor replies with "\r\n." (CR LF dot).
*/
static int download(struct cosa_data *cosa, const char __user *microcode, int length, int address)
{
int i;
if (put_wait_data(cosa, 'w') == -1) return -1;
if ((i=get_wait_data(cosa)) != 'w') { printk("dnld: 0x%04x\n",i); return -2;}
if (get_wait_data(cosa) != '=') return -3;
if (puthexnumber(cosa, address) < 0) return -4;
if (put_wait_data(cosa, ' ') == -1) return -10;
if (get_wait_data(cosa) != ' ') return -11;
if (get_wait_data(cosa) != '=') return -12;
if (puthexnumber(cosa, address+length-1) < 0) return -13;
if (put_wait_data(cosa, ' ') == -1) return -18;
if (get_wait_data(cosa) != ' ') return -19;
while (length--) {
char c;
#ifndef SRP_DOWNLOAD_AT_BOOT
if (get_user(c, microcode))
return -23; /* ??? */
#else
c = *microcode;
#endif
if (put_wait_data(cosa, c) == -1)
return -20;
microcode++;
}
if (get_wait_data(cosa) != '\r') return -21;
if (get_wait_data(cosa) != '\n') return -22;
if (get_wait_data(cosa) != '.') return -23;
#if 0
printk(KERN_DEBUG "cosa%d: download completed.\n", cosa->num);
#endif
return 0;
}
/*
* Starting microcode is done via the "g" command of the SRP monitor.
* The chat should be the following: "g" "g=" "<addr><CR>"
* "<CR><CR><LF><CR><LF>".
*/
static int startmicrocode(struct cosa_data *cosa, int address)
{
if (put_wait_data(cosa, 'g') == -1) return -1;
if (get_wait_data(cosa) != 'g') return -2;
if (get_wait_data(cosa) != '=') return -3;
if (puthexnumber(cosa, address) < 0) return -4;
if (put_wait_data(cosa, '\r') == -1) return -5;
if (get_wait_data(cosa) != '\r') return -6;
if (get_wait_data(cosa) != '\r') return -7;
if (get_wait_data(cosa) != '\n') return -8;
if (get_wait_data(cosa) != '\r') return -9;
if (get_wait_data(cosa) != '\n') return -10;
#if 0
printk(KERN_DEBUG "cosa%d: microcode started\n", cosa->num);
#endif
return 0;
}
/*
* Reading memory is done via the "r" command of the SRP monitor.
* The chat is the following "r" "r=" "<addr> " " =" "<last_byte> " " "
* Then driver can read the data and the conversation is finished
* by SRP monitor sending "<CR><LF>." (dot at the end).
*
* This routine is not needed during the normal operation and serves
* for debugging purposes only.
*/
static int readmem(struct cosa_data *cosa, char __user *microcode, int length, int address)
{
if (put_wait_data(cosa, 'r') == -1) return -1;
if ((get_wait_data(cosa)) != 'r') return -2;
if ((get_wait_data(cosa)) != '=') return -3;
if (puthexnumber(cosa, address) < 0) return -4;
if (put_wait_data(cosa, ' ') == -1) return -5;
if (get_wait_data(cosa) != ' ') return -6;
if (get_wait_data(cosa) != '=') return -7;
if (puthexnumber(cosa, address+length-1) < 0) return -8;
if (put_wait_data(cosa, ' ') == -1) return -9;
if (get_wait_data(cosa) != ' ') return -10;
while (length--) {
char c;
int i;
if ((i=get_wait_data(cosa)) == -1) {
printk (KERN_INFO "cosa: 0x%04x bytes remaining\n",
length);
return -11;
}
c=i;
#if 1
if (put_user(c, microcode))
return -23; /* ??? */
#else
*microcode = c;
#endif
microcode++;
}
if (get_wait_data(cosa) != '\r') return -21;
if (get_wait_data(cosa) != '\n') return -22;
if (get_wait_data(cosa) != '.') return -23;
#if 0
printk(KERN_DEBUG "cosa%d: readmem completed.\n", cosa->num);
#endif
return 0;
}
/*
* This function resets the device and reads the initial prompt
* of the device's ROM monitor.
*/
static int cosa_reset_and_read_id(struct cosa_data *cosa, char *idstring)
{
int i=0, id=0, prev=0, curr=0;
/* Reset the card ... */
cosa_putstatus(cosa, 0);
cosa_getdata8(cosa);
cosa_putstatus(cosa, SR_RST);
#ifdef MODULE
msleep(500);
#else
udelay(5*100000);
#endif
/* Disable all IRQs from the card */
cosa_putstatus(cosa, 0);
/*
* Try to read the ID string. The card then prints out the
* identification string ended by the "\n\x2e".
*
* The following loop is indexed through i (instead of id)
* to avoid looping forever when for any reason
* the port returns '\r', '\n' or '\x2e' permanently.
*/
for (i=0; i<COSA_MAX_ID_STRING-1; i++, prev=curr) {
if ((curr = get_wait_data(cosa)) == -1) {
return -1;
}
curr &= 0xff;
if (curr != '\r' && curr != '\n' && curr != 0x2e)
idstring[id++] = curr;
if (curr == 0x2e && prev == '\n')
break;
}
/* Perhaps we should fail when i==COSA_MAX_ID_STRING-1 ? */
idstring[id] = '\0';
return id;
}
/* ---------- Auxiliary routines for COSA/SRP monitor ---------- */
/*
* This routine gets the data byte from the card waiting for the SR_RX_RDY
* bit to be set in a loop. It should be used in the exceptional cases
* only (for example when resetting the card or downloading the firmware.
*/
static int get_wait_data(struct cosa_data *cosa)
{
int retries = 1000;
while (--retries) {
/* read data and return them */
if (cosa_getstatus(cosa) & SR_RX_RDY) {
short r;
r = cosa_getdata8(cosa);
#if 0
printk(KERN_INFO "cosa: get_wait_data returning after %d retries\n", 999-retries);
#endif
return r;
}
/* sleep if not ready to read */
schedule_timeout_interruptible(1);
}
printk(KERN_INFO "cosa: timeout in get_wait_data (status 0x%x)\n",
cosa_getstatus(cosa));
return -1;
}
/*
* This routine puts the data byte to the card waiting for the SR_TX_RDY
* bit to be set in a loop. It should be used in the exceptional cases
* only (for example when resetting the card or downloading the firmware).
*/
static int put_wait_data(struct cosa_data *cosa, int data)
{
int retries = 1000;
while (--retries) {
/* read data and return them */
if (cosa_getstatus(cosa) & SR_TX_RDY) {
cosa_putdata8(cosa, data);
#if 0
printk(KERN_INFO "Putdata: %d retries\n", 999-retries);
#endif
return 0;
}
#if 0
/* sleep if not ready to read */
schedule_timeout_interruptible(1);
#endif
}
printk(KERN_INFO "cosa%d: timeout in put_wait_data (status 0x%x)\n",
cosa->num, cosa_getstatus(cosa));
return -1;
}
/*
* The following routine puts the hexadecimal number into the SRP monitor
* and verifies the proper echo of the sent bytes. Returns 0 on success,
* negative number on failure (-1,-3,-5,-7) means that put_wait_data() failed,
* (-2,-4,-6,-8) means that reading echo failed.
*/
static int puthexnumber(struct cosa_data *cosa, int number)
{
char temp[5];
int i;
/* Well, I should probably replace this by something faster. */
sprintf(temp, "%04X", number);
for (i=0; i<4; i++) {
if (put_wait_data(cosa, temp[i]) == -1) {
printk(KERN_NOTICE "cosa%d: puthexnumber failed to write byte %d\n",
cosa->num, i);
return -1-2*i;
}
if (get_wait_data(cosa) != temp[i]) {
printk(KERN_NOTICE "cosa%d: puthexhumber failed to read echo of byte %d\n",
cosa->num, i);
return -2-2*i;
}
}
return 0;
}
/* ---------- Interrupt routines ---------- */
/*
* There are three types of interrupt:
* At the beginning of transmit - this handled is in tx_interrupt(),
* at the beginning of receive - it is in rx_interrupt() and
* at the end of transmit/receive - it is the eot_interrupt() function.
* These functions are multiplexed by cosa_interrupt() according to the
* COSA status byte. I have moved the rx/tx/eot interrupt handling into
* separate functions to make it more readable. These functions are inline,
* so there should be no overhead of function call.
*
* In the COSA bus-master mode, we need to tell the card the address of a
* buffer. Unfortunately, COSA may be too slow for us, so we must busy-wait.
* It's time to use the bottom half :-(
*/
/*
* Transmit interrupt routine - called when COSA is willing to obtain
* data from the OS. The most tricky part of the routine is selection
* of channel we (OS) want to send packet for. For SRP we should probably
* use the round-robin approach. The newer COSA firmwares have a simple
* flow-control - in the status word has bits 2 and 3 set to 1 means that the
* channel 0 or 1 doesn't want to receive data.
*
* It seems there is a bug in COSA firmware (need to trace it further):
* When the driver status says that the kernel has no more data for transmit
* (e.g. at the end of TX DMA) and then the kernel changes its mind
* (e.g. new packet is queued to hard_start_xmit()), the card issues
* the TX interrupt but does not mark the channel as ready-to-transmit.
* The fix seems to be to push the packet to COSA despite its request.
* We first try to obey the card's opinion, and then fall back to forced TX.
*/
static inline void tx_interrupt(struct cosa_data *cosa, int status)
{
unsigned long flags, flags1;
#ifdef DEBUG_IRQS
printk(KERN_INFO "cosa%d: SR_DOWN_REQUEST status=0x%04x\n",
cosa->num, status);
#endif
spin_lock_irqsave(&cosa->lock, flags);
set_bit(TXBIT, &cosa->rxtx);
if (!test_bit(IRQBIT, &cosa->rxtx)) {
/* flow control, see the comment above */
int i=0;
if (!cosa->txbitmap) {
printk(KERN_WARNING "%s: No channel wants data "
"in TX IRQ. Expect DMA timeout.",
cosa->name);
put_driver_status_nolock(cosa);
clear_bit(TXBIT, &cosa->rxtx);
spin_unlock_irqrestore(&cosa->lock, flags);
return;
}
while(1) {
cosa->txchan++;
i++;
if (cosa->txchan >= cosa->nchannels)
cosa->txchan = 0;
if (!(cosa->txbitmap & (1<<cosa->txchan)))
continue;
if (~status & (1 << (cosa->txchan+DRIVER_TXMAP_SHIFT)))
break;
/* in second pass, accept first ready-to-TX channel */
if (i > cosa->nchannels) {
/* Can be safely ignored */
#ifdef DEBUG_IRQS
printk(KERN_DEBUG "%s: Forcing TX "
"to not-ready channel %d\n",
cosa->name, cosa->txchan);
#endif
break;
}
}
cosa->txsize = cosa->chan[cosa->txchan].txsize;
if (cosa_dma_able(cosa->chan+cosa->txchan,
cosa->chan[cosa->txchan].txbuf, cosa->txsize)) {
cosa->txbuf = cosa->chan[cosa->txchan].txbuf;
} else {
memcpy(cosa->bouncebuf, cosa->chan[cosa->txchan].txbuf,
cosa->txsize);
cosa->txbuf = cosa->bouncebuf;
}
}
if (is_8bit(cosa)) {
if (!test_bit(IRQBIT, &cosa->rxtx)) {
cosa_putstatus(cosa, SR_TX_INT_ENA);
cosa_putdata8(cosa, ((cosa->txchan << 5) & 0xe0)|
((cosa->txsize >> 8) & 0x1f));
#ifdef DEBUG_IO
debug_status_out(cosa, SR_TX_INT_ENA);
debug_data_out(cosa, ((cosa->txchan << 5) & 0xe0)|
((cosa->txsize >> 8) & 0x1f));
debug_data_in(cosa, cosa_getdata8(cosa));
#else
cosa_getdata8(cosa);
#endif
set_bit(IRQBIT, &cosa->rxtx);
spin_unlock_irqrestore(&cosa->lock, flags);
return;
} else {
clear_bit(IRQBIT, &cosa->rxtx);
cosa_putstatus(cosa, 0);
cosa_putdata8(cosa, cosa->txsize&0xff);
#ifdef DEBUG_IO
debug_status_out(cosa, 0);
debug_data_out(cosa, cosa->txsize&0xff);
#endif
}
} else {
cosa_putstatus(cosa, SR_TX_INT_ENA);
cosa_putdata16(cosa, ((cosa->txchan<<13) & 0xe000)
| (cosa->txsize & 0x1fff));
#ifdef DEBUG_IO
debug_status_out(cosa, SR_TX_INT_ENA);
debug_data_out(cosa, ((cosa->txchan<<13) & 0xe000)
| (cosa->txsize & 0x1fff));
debug_data_in(cosa, cosa_getdata8(cosa));
debug_status_out(cosa, 0);
#else
cosa_getdata8(cosa);
#endif
cosa_putstatus(cosa, 0);
}
if (cosa->busmaster) {
unsigned long addr = virt_to_bus(cosa->txbuf);
int count=0;
printk(KERN_INFO "busmaster IRQ\n");
while (!(cosa_getstatus(cosa)&SR_TX_RDY)) {
count++;
udelay(10);
if (count > 1000) break;
}
printk(KERN_INFO "status %x\n", cosa_getstatus(cosa));
printk(KERN_INFO "ready after %d loops\n", count);
cosa_putdata16(cosa, (addr >> 16)&0xffff);
count = 0;
while (!(cosa_getstatus(cosa)&SR_TX_RDY)) {
count++;
if (count > 1000) break;
udelay(10);
}
printk(KERN_INFO "ready after %d loops\n", count);
cosa_putdata16(cosa, addr &0xffff);
flags1 = claim_dma_lock();
set_dma_mode(cosa->dma, DMA_MODE_CASCADE);
enable_dma(cosa->dma);
release_dma_lock(flags1);
} else {
/* start the DMA */
flags1 = claim_dma_lock();
disable_dma(cosa->dma);
clear_dma_ff(cosa->dma);
set_dma_mode(cosa->dma, DMA_MODE_WRITE);
set_dma_addr(cosa->dma, virt_to_bus(cosa->txbuf));
set_dma_count(cosa->dma, cosa->txsize);
enable_dma(cosa->dma);
release_dma_lock(flags1);
}
cosa_putstatus(cosa, SR_TX_DMA_ENA|SR_USR_INT_ENA);
#ifdef DEBUG_IO
debug_status_out(cosa, SR_TX_DMA_ENA|SR_USR_INT_ENA);
#endif
spin_unlock_irqrestore(&cosa->lock, flags);
}
static inline void rx_interrupt(struct cosa_data *cosa, int status)
{
unsigned long flags;
#ifdef DEBUG_IRQS
printk(KERN_INFO "cosa%d: SR_UP_REQUEST\n", cosa->num);
#endif
spin_lock_irqsave(&cosa->lock, flags);
set_bit(RXBIT, &cosa->rxtx);
if (is_8bit(cosa)) {
if (!test_bit(IRQBIT, &cosa->rxtx)) {
set_bit(IRQBIT, &cosa->rxtx);
put_driver_status_nolock(cosa);
cosa->rxsize = cosa_getdata8(cosa) <<8;
#ifdef DEBUG_IO
debug_data_in(cosa, cosa->rxsize >> 8);
#endif
spin_unlock_irqrestore(&cosa->lock, flags);
return;
} else {
clear_bit(IRQBIT, &cosa->rxtx);
cosa->rxsize |= cosa_getdata8(cosa) & 0xff;
#ifdef DEBUG_IO
debug_data_in(cosa, cosa->rxsize & 0xff);
#endif
#if 0
printk(KERN_INFO "cosa%d: receive rxsize = (0x%04x).\n",
cosa->num, cosa->rxsize);
#endif
}
} else {
cosa->rxsize = cosa_getdata16(cosa);
#ifdef DEBUG_IO
debug_data_in(cosa, cosa->rxsize);
#endif
#if 0
printk(KERN_INFO "cosa%d: receive rxsize = (0x%04x).\n",
cosa->num, cosa->rxsize);
#endif
}
if (((cosa->rxsize & 0xe000) >> 13) >= cosa->nchannels) {
printk(KERN_WARNING "%s: rx for unknown channel (0x%04x)\n",
cosa->name, cosa->rxsize);
spin_unlock_irqrestore(&cosa->lock, flags);
goto reject;
}
cosa->rxchan = cosa->chan + ((cosa->rxsize & 0xe000) >> 13);
cosa->rxsize &= 0x1fff;
spin_unlock_irqrestore(&cosa->lock, flags);
cosa->rxbuf = NULL;
if (cosa->rxchan->setup_rx)
cosa->rxbuf = cosa->rxchan->setup_rx(cosa->rxchan, cosa->rxsize);
if (!cosa->rxbuf) {
reject: /* Reject the packet */
printk(KERN_INFO "cosa%d: rejecting packet on channel %d\n",
cosa->num, cosa->rxchan->num);
cosa->rxbuf = cosa->bouncebuf;
}
/* start the DMA */
flags = claim_dma_lock();
disable_dma(cosa->dma);
clear_dma_ff(cosa->dma);
set_dma_mode(cosa->dma, DMA_MODE_READ);
if (cosa_dma_able(cosa->rxchan, cosa->rxbuf, cosa->rxsize & 0x1fff)) {
set_dma_addr(cosa->dma, virt_to_bus(cosa->rxbuf));
} else {
set_dma_addr(cosa->dma, virt_to_bus(cosa->bouncebuf));
}
set_dma_count(cosa->dma, (cosa->rxsize&0x1fff));
enable_dma(cosa->dma);
release_dma_lock(flags);
spin_lock_irqsave(&cosa->lock, flags);
cosa_putstatus(cosa, SR_RX_DMA_ENA|SR_USR_INT_ENA);
if (!is_8bit(cosa) && (status & SR_TX_RDY))
cosa_putdata8(cosa, DRIVER_RX_READY);
#ifdef DEBUG_IO
debug_status_out(cosa, SR_RX_DMA_ENA|SR_USR_INT_ENA);
if (!is_8bit(cosa) && (status & SR_TX_RDY))
debug_data_cmd(cosa, DRIVER_RX_READY);
#endif
spin_unlock_irqrestore(&cosa->lock, flags);
}
static inline void eot_interrupt(struct cosa_data *cosa, int status)
{
unsigned long flags, flags1;
spin_lock_irqsave(&cosa->lock, flags);
flags1 = claim_dma_lock();
disable_dma(cosa->dma);
clear_dma_ff(cosa->dma);
release_dma_lock(flags1);
if (test_bit(TXBIT, &cosa->rxtx)) {
struct channel_data *chan = cosa->chan+cosa->txchan;
if (chan->tx_done)
if (chan->tx_done(chan, cosa->txsize))
clear_bit(chan->num, &cosa->txbitmap);
} else if (test_bit(RXBIT, &cosa->rxtx)) {
#ifdef DEBUG_DATA
{
int i;
printk(KERN_INFO "cosa%dc%d: done rx(0x%x)", cosa->num,
cosa->rxchan->num, cosa->rxsize);
for (i=0; i<cosa->rxsize; i++)
printk (" %02x", cosa->rxbuf[i]&0xff);
printk("\n");
}
#endif
/* Packet for unknown channel? */
if (cosa->rxbuf == cosa->bouncebuf)
goto out;
if (!cosa_dma_able(cosa->rxchan, cosa->rxbuf, cosa->rxsize))
memcpy(cosa->rxbuf, cosa->bouncebuf, cosa->rxsize);
if (cosa->rxchan->rx_done)
if (cosa->rxchan->rx_done(cosa->rxchan))
clear_bit(cosa->rxchan->num, &cosa->rxbitmap);
} else {
printk(KERN_NOTICE "cosa%d: unexpected EOT interrupt\n",
cosa->num);
}
/*
* Clear the RXBIT, TXBIT and IRQBIT (the latest should be
* cleared anyway). We should do it as soon as possible
* so that we can tell the COSA we are done and to give it a time
* for recovery.
*/
out:
cosa->rxtx = 0;
put_driver_status_nolock(cosa);
spin_unlock_irqrestore(&cosa->lock, flags);
}
static irqreturn_t cosa_interrupt(int irq, void *cosa_)
{
unsigned status;
int count = 0;
struct cosa_data *cosa = cosa_;
again:
status = cosa_getstatus(cosa);
#ifdef DEBUG_IRQS
printk(KERN_INFO "cosa%d: got IRQ, status 0x%02x\n", cosa->num,
status & 0xff);
#endif
#ifdef DEBUG_IO
debug_status_in(cosa, status);
#endif
switch (status & SR_CMD_FROM_SRP_MASK) {
case SR_DOWN_REQUEST:
tx_interrupt(cosa, status);
break;
case SR_UP_REQUEST:
rx_interrupt(cosa, status);
break;
case SR_END_OF_TRANSFER:
eot_interrupt(cosa, status);
break;
default:
/* We may be too fast for SRP. Try to wait a bit more. */
if (count++ < 100) {
udelay(100);
goto again;
}
printk(KERN_INFO "cosa%d: unknown status 0x%02x in IRQ after %d retries\n",
cosa->num, status & 0xff, count);
}
#ifdef DEBUG_IRQS
if (count)
printk(KERN_INFO "%s: %d-times got unknown status in IRQ\n",
cosa->name, count);
else
printk(KERN_INFO "%s: returning from IRQ\n", cosa->name);
#endif
return IRQ_HANDLED;
}
/* ---------- I/O debugging routines ---------- */
/*
* These routines can be used to monitor COSA/SRP I/O and to printk()
* the data being transferred on the data and status I/O port in a
* readable way.
*/
#ifdef DEBUG_IO
static void debug_status_in(struct cosa_data *cosa, int status)
{
char *s;
switch(status & SR_CMD_FROM_SRP_MASK) {
case SR_UP_REQUEST:
s = "RX_REQ";
break;
case SR_DOWN_REQUEST:
s = "TX_REQ";
break;
case SR_END_OF_TRANSFER:
s = "ET_REQ";
break;
default:
s = "NO_REQ";
break;
}
printk(KERN_INFO "%s: IO: status -> 0x%02x (%s%s%s%s)\n",
cosa->name,
status,
status & SR_USR_RQ ? "USR_RQ|":"",
status & SR_TX_RDY ? "TX_RDY|":"",
status & SR_RX_RDY ? "RX_RDY|":"",
s);
}
static void debug_status_out(struct cosa_data *cosa, int status)
{
printk(KERN_INFO "%s: IO: status <- 0x%02x (%s%s%s%s%s%s)\n",
cosa->name,
status,
status & SR_RX_DMA_ENA ? "RXDMA|":"!rxdma|",
status & SR_TX_DMA_ENA ? "TXDMA|":"!txdma|",
status & SR_RST ? "RESET|":"",
status & SR_USR_INT_ENA ? "USRINT|":"!usrint|",
status & SR_TX_INT_ENA ? "TXINT|":"!txint|",
status & SR_RX_INT_ENA ? "RXINT":"!rxint");
}
static void debug_data_in(struct cosa_data *cosa, int data)
{
printk(KERN_INFO "%s: IO: data -> 0x%04x\n", cosa->name, data);
}
static void debug_data_out(struct cosa_data *cosa, int data)
{
printk(KERN_INFO "%s: IO: data <- 0x%04x\n", cosa->name, data);
}
static void debug_data_cmd(struct cosa_data *cosa, int data)
{
printk(KERN_INFO "%s: IO: data <- 0x%04x (%s|%s)\n",
cosa->name, data,
data & SR_RDY_RCV ? "RX_RDY" : "!rx_rdy",
data & SR_RDY_SND ? "TX_RDY" : "!tx_rdy");
}
#endif
/* EOF -- this file has not been truncated */
