/******************************************************************************
*
* Name: skgeinit.h
* Project: Gigabit Ethernet Adapters, Common Modules
* Version: $Revision: 1.83 $
* Date: $Date: 2003/09/16 14:07:37 $
* Purpose: Structures and prototypes for the GE Init Module
*
******************************************************************************/
/******************************************************************************
*
* (C)Copyright 1998-2002 SysKonnect.
* (C)Copyright 2002-2003 Marvell.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* The information in this file is provided "AS IS" without warranty.
*
******************************************************************************/
#ifndef __INC_SKGEINIT_H_
#define __INC_SKGEINIT_H_
#ifdef __cplusplus
extern "C" {
#endif /* __cplusplus */
/* defines ********************************************************************/
#define SK_TEST_VAL 0x11335577UL
/* modifying Link LED behaviour (used with SkGeLinkLED()) */
#define SK_LNK_OFF LED_OFF
#define SK_LNK_ON (LED_ON | LED_BLK_OFF | LED_SYNC_OFF)
#define SK_LNK_BLINK (LED_ON | LED_BLK_ON | LED_SYNC_ON)
#define SK_LNK_PERM (LED_ON | LED_BLK_OFF | LED_SYNC_ON)
#define SK_LNK_TST (LED_ON | LED_BLK_ON | LED_SYNC_OFF)
/* parameter 'Mode' when calling SK_HWAC_LINK_LED() */
#define SK_LED_OFF LED_OFF
#define SK_LED_ACTIVE (LED_ON | LED_BLK_OFF | LED_SYNC_OFF)
#define SK_LED_STANDBY (LED_ON | LED_BLK_ON | LED_SYNC_OFF)
/* addressing LED Registers in SkGeXmitLED() */
#define XMIT_LED_INI 0
#define XMIT_LED_CNT (RX_LED_VAL - RX_LED_INI)
#define XMIT_LED_CTRL (RX_LED_CTRL- RX_LED_INI)
#define XMIT_LED_TST (RX_LED_TST - RX_LED_INI)
/* parameter 'Mode' when calling SkGeXmitLED() */
#define SK_LED_DIS 0
#define SK_LED_ENA 1
#define SK_LED_TST 2
/* Counter and Timer constants, for a host clock of 62.5 MHz */
#define SK_XMIT_DUR 0x002faf08UL /* 50 ms */
#define SK_BLK_DUR 0x01dcd650UL /* 500 ms */
#define SK_DPOLL_DEF 0x00ee6b28UL /* 250 ms at 62.5 MHz */
#define SK_DPOLL_MAX 0x00ffffffUL /* 268 ms at 62.5 MHz */
/* 215 ms at 78.12 MHz */
#define SK_FACT_62 100 /* is given in percent */
#define SK_FACT_53 85 /* on GENESIS: 53.12 MHz */
#define SK_FACT_78 125 /* on YUKON: 78.12 MHz */
/* Timeout values */
#define SK_MAC_TO_53 72 /* MAC arbiter timeout */
#define SK_PKT_TO_53 0x2000 /* Packet arbiter timeout */
#define SK_PKT_TO_MAX 0xffff /* Maximum value */
#define SK_RI_TO_53 36 /* RAM interface timeout */
#define SK_PHY_ACC_TO 600000 /* PHY access timeout */
/* RAM Buffer High Pause Threshold values */
#define SK_RB_ULPP ( 8 * 1024) /* Upper Level in kB/8 */
#define SK_RB_LLPP_S (10 * 1024) /* Lower Level for small Queues */
#define SK_RB_LLPP_B (16 * 1024) /* Lower Level for big Queues */
#ifndef SK_BMU_RX_WM
#define SK_BMU_RX_WM 0x600 /* BMU Rx Watermark */
#endif
#ifndef SK_BMU_TX_WM
#define SK_BMU_TX_WM 0x600 /* BMU Tx Watermark */
#endif
/* XMAC II Rx High Watermark */
#define SK_XM_RX_HI_WM 0x05aa /* 1450 */
/* XMAC II Tx Threshold */
#define SK_XM_THR_REDL 0x01fb /* .. for redundant link usage */
#define SK_XM_THR_SL 0x01fb /* .. for single link adapters */
#define SK_XM_THR_MULL 0x01fb /* .. for multiple link usage */
#define SK_XM_THR_JUMBO 0x03fc /* .. for jumbo frame usage */
/* values for GIPortUsage */
#define SK_RED_LINK 1 /* redundant link usage */
#define SK_MUL_LINK 2 /* multiple link usage */
#define SK_JUMBO_LINK 3 /* driver uses jumbo frames */
/* Minimum RAM Buffer Rx Queue Size */
#define SK_MIN_RXQ_SIZE 16 /* 16 kB */
/* Minimum RAM Buffer Tx Queue Size */
#define SK_MIN_TXQ_SIZE 16 /* 16 kB */
/* Queue Size units */
#define QZ_UNITS 0x7
#define QZ_STEP 8
/* Percentage of queue size from whole memory */
/* 80 % for receive */
#define RAM_QUOTA_RX 80L
/* 0% for sync transfer */
#define RAM_QUOTA_SYNC 0L
/* the rest (20%) is taken for async transfer */
/* Get the rounded queue size in Bytes in 8k steps */
#define ROUND_QUEUE_SIZE(SizeInBytes) \
((((unsigned long) (SizeInBytes) + (QZ_STEP*1024L)-1) / 1024) & \
~(QZ_STEP-1))
/* Get the rounded queue size in KBytes in 8k steps */
#define ROUND_QUEUE_SIZE_KB(Kilobytes) \
ROUND_QUEUE_SIZE((Kilobytes) * 1024L)
/* Types of RAM Buffer Queues */
#define SK_RX_SRAM_Q 1 /* small receive queue */
#define SK_RX_BRAM_Q 2 /* big receive queue */
#define SK_TX_RAM_Q 3 /* small or big transmit queue */
/* parameter 'Dir' when calling SkGeStopPort() */
#define SK_STOP_TX 1 /* Stops the transmit path, resets the XMAC */
#define SK_STOP_RX 2 /* Stops the receive path */
#define SK_STOP_ALL 3 /* Stops Rx and Tx path, resets the XMAC */
/* parameter 'RstMode' when calling SkGeStopPort() */
#define SK_SOFT_RST 1 /* perform a software reset */
#define SK_HARD_RST 2 /* perform a hardware reset */
/* Init Levels */
#define SK_INIT_DATA 0 /* Init level 0: init data structures */
#define SK_INIT_IO 1 /* Init level 1: init with IOs */
#define SK_INIT_RUN 2 /* Init level 2: init for run time */
/* Link Mode Parameter */
#define SK_LMODE_HALF 1 /* Half Duplex Mode */
#define SK_LMODE_FULL 2 /* Full Duplex Mode */
#define SK_LMODE_AUTOHALF 3 /* AutoHalf Duplex Mode */
#define SK_LMODE_AUTOFULL 4 /* AutoFull Duplex Mode */
#define SK_LMODE_AUTOBOTH 5 /* AutoBoth Duplex Mode */
#define SK_LMODE_AUTOSENSE 6 /* configured mode auto sensing */
#define SK_LMODE_INDETERMINATED 7 /* indeterminated */
/* Auto-negotiation timeout in 100ms granularity */
#define SK_AND_MAX_TO 6 /* Wait 600 msec before link comes up */
/* Auto-negotiation error codes */
#define SK_AND_OK 0 /* no error */
#define SK_AND_OTHER 1 /* other error than below */
#define SK_AND_DUP_CAP 2 /* Duplex capabilities error */
/* Link Speed Capabilities */
#define SK_LSPEED_CAP_AUTO (1<<0) /* Automatic resolution */
#define SK_LSPEED_CAP_10MBPS (1<<1) /* 10 Mbps */
#define SK_LSPEED_CAP_100MBPS (1<<2) /* 100 Mbps */
#define SK_LSPEED_CAP_1000MBPS (1<<3) /* 1000 Mbps */
#define SK_LSPEED_CAP_INDETERMINATED (1<<4) /* indeterminated */
/* Link Speed Parameter */
#define SK_LSPEED_AUTO 1 /* Automatic resolution */
#define SK_LSPEED_10MBPS 2 /* 10 Mbps */
#define SK_LSPEED_100MBPS 3 /* 100 Mbps */
#define SK_LSPEED_1000MBPS 4 /* 1000 Mbps */
#define SK_LSPEED_INDETERMINATED 5 /* indeterminated */
/* Link Speed Current State */
#define SK_LSPEED_STAT_UNKNOWN 1
#define SK_LSPEED_STAT_10MBPS 2
#define SK_LSPEED_STAT_100MBPS 3
#define SK_LSPEED_STAT_1000MBPS 4
#define SK_LSPEED_STAT_INDETERMINATED 5
/* Link Capability Parameter */
#define SK_LMODE_CAP_HALF (1<<0) /* Half Duplex Mode */
#define SK_LMODE_CAP_FULL (1<<1) /* Full Duplex Mode */
#define SK_LMODE_CAP_AUTOHALF (1<<2) /* AutoHalf Duplex Mode */
#define SK_LMODE_CAP_AUTOFULL (1<<3) /* AutoFull Duplex Mode */
#define SK_LMODE_CAP_INDETERMINATED (1<<4) /* indeterminated */
/* Link Mode Current State */
#define SK_LMODE_STAT_UNKNOWN 1 /* Unknown Duplex Mode */
#define SK_LMODE_STAT_HALF 2 /* Half Duplex Mode */
#define SK_LMODE_STAT_FULL 3 /* Full Duplex Mode */
#define SK_LMODE_STAT_AUTOHALF 4 /* Half Duplex Mode obtained by Auto-Neg */
#define SK_LMODE_STAT_AUTOFULL 5 /* Full Duplex Mode obtained by Auto-Neg */
#define SK_LMODE_STAT_INDETERMINATED 6 /* indeterminated */
/* Flow Control Mode Parameter (and capabilities) */
#define SK_FLOW_MODE_NONE 1 /* No Flow-Control */
#define SK_FLOW_MODE_LOC_SEND 2 /* Local station sends PAUSE */
#define SK_FLOW_MODE_SYMMETRIC 3 /* Both stations may send PAUSE */
#define SK_FLOW_MODE_SYM_OR_REM 4 /* Both stations may send PAUSE or
* just the remote station may send PAUSE
*/
#define SK_FLOW_MODE_INDETERMINATED 5 /* indeterminated */
/* Flow Control Status Parameter */
#define SK_FLOW_STAT_NONE 1 /* No Flow Control */
#define SK_FLOW_STAT_REM_SEND 2 /* Remote Station sends PAUSE */
#define SK_FLOW_STAT_LOC_SEND 3 /* Local station sends PAUSE */
#define SK_FLOW_STAT_SYMMETRIC 4 /* Both station may send PAUSE */
#define SK_FLOW_STAT_INDETERMINATED 5 /* indeterminated */
/* Master/Slave Mode Capabilities */
#define SK_MS_CAP_AUTO (1<<0) /* Automatic resolution */
#define SK_MS_CAP_MASTER (1<<1) /* This station is master */
#define SK_MS_CAP_SLAVE (1<<2) /* This station is slave */
#define SK_MS_CAP_INDETERMINATED (1<<3) /* indeterminated */
/* Set Master/Slave Mode Parameter (and capabilities) */
#define SK_MS_MODE_AUTO 1 /* Automatic resolution */
#define SK_MS_MODE_MASTER 2 /* This station is master */
#define SK_MS_MODE_SLAVE 3 /* This station is slave */
#define SK_MS_MODE_INDETERMINATED 4 /* indeterminated */
/* Master/Slave Status Parameter */
#define SK_MS_STAT_UNSET 1 /* The M/S status is not set */
#define SK_MS_STAT_MASTER 2 /* This station is master */
#define SK_MS_STAT_SLAVE 3 /* This station is slave */
#define SK_MS_STAT_FAULT 4 /* M/S resolution failed */
#define SK_MS_STAT_INDETERMINATED 5 /* indeterminated */
/* parameter 'Mode' when calling SkXmSetRxCmd() */
#define SK_STRIP_FCS_ON (1<<0) /* Enable FCS stripping of Rx frames */
#define SK_STRIP_FCS_OFF (1<<1) /* Disable FCS stripping of Rx frames */
#define SK_STRIP_PAD_ON (1<<2) /* Enable pad byte stripping of Rx fr */
#define SK_STRIP_PAD_OFF (1<<3) /* Disable pad byte stripping of Rx fr */
#define SK_LENERR_OK_ON (1<<4) /* Don't chk fr for in range len error */
#define SK_LENERR_OK_OFF (1<<5) /* Check frames for in range len error */
#define SK_BIG_PK_OK_ON (1<<6) /* Don't set Rx Error bit for big frames */
#define SK_BIG_PK_OK_OFF (1<<7) /* Set Rx Error bit for big frames */
#define SK_SELF_RX_ON (1<<8) /* Enable Rx of own packets */
#define SK_SELF_RX_OFF (1<<9) /* Disable Rx of own packets */
/* parameter 'Para' when calling SkMacSetRxTxEn() */
#define SK_MAC_LOOPB_ON (1<<0) /* Enable MAC Loopback Mode */
#define SK_MAC_LOOPB_OFF (1<<1) /* Disable MAC Loopback Mode */
#define SK_PHY_LOOPB_ON (1<<2) /* Enable PHY Loopback Mode */
#define SK_PHY_LOOPB_OFF (1<<3) /* Disable PHY Loopback Mode */
#define SK_PHY_FULLD_ON (1<<4) /* Enable GMII Full Duplex */
#define SK_PHY_FULLD_OFF (1<<5) /* Disable GMII Full Duplex */
/* States of PState */
#define SK_PRT_RESET 0 /* the port is reset */
#define SK_PRT_STOP 1 /* the port is stopped (similar to SW reset) */
#define SK_PRT_INIT 2 /* the port is initialized */
#define SK_PRT_RUN 3 /* the port has an active link */
/* PHY power down modes */
#define PHY_PM_OPERATIONAL_MODE 0 /* PHY operational mode */
#define PHY_PM_DEEP_SLEEP 1 /* coma mode --> minimal power */
#define PHY_PM_IEEE_POWER_DOWN 2 /* IEEE 22.2.4.1.5 compl. power down */
#define PHY_PM_ENERGY_DETECT 3 /* energy detect */
#define PHY_PM_ENERGY_DETECT_PLUS 4 /* energy detect plus */
/* Default receive frame limit for Workaround of XMAC Errata */
#define SK_DEF_RX_WA_LIM SK_CONSTU64(100)
/* values for GILedBlinkCtrl (LED Blink Control) */
#define SK_ACT_LED_BLINK (1<<0) /* Active LED blinking */
#define SK_DUP_LED_NORMAL (1<<1) /* Duplex LED normal */
#define SK_LED_LINK100_ON (1<<2) /* Link 100M LED on */
/* Link Partner Status */
#define SK_LIPA_UNKNOWN 0 /* Link partner is in unknown state */
#define SK_LIPA_MANUAL 1 /* Link partner is in detected manual state */
#define SK_LIPA_AUTO 2 /* Link partner is in auto-negotiation state */
/* Maximum Restarts before restart is ignored (3Com WA) */
#define SK_MAX_LRESTART 3 /* Max. 3 times the link is restarted */
/* Max. Auto-neg. timeouts before link detection in sense mode is reset */
#define SK_MAX_ANEG_TO 10 /* Max. 10 times the sense mode is reset */
/* structures *****************************************************************/
/*
* MAC specific functions
*/
typedef struct s_GeMacFunc {
int (*pFnMacUpdateStats)(SK_AC *pAC, SK_IOC IoC, unsigned int Port);
int (*pFnMacStatistic)(SK_AC *pAC, SK_IOC IoC, unsigned int Port,
SK_U16 StatAddr, SK_U32 SK_FAR *pVal);
int (*pFnMacResetCounter)(SK_AC *pAC, SK_IOC IoC, unsigned int Port);
int (*pFnMacOverflow)(SK_AC *pAC, SK_IOC IoC, unsigned int Port,
SK_U16 IStatus, SK_U64 SK_FAR *pVal);
} SK_GEMACFUNC;
/*
* Port Structure
*/
typedef struct s_GePort {
#ifndef SK_DIAG
SK_TIMER PWaTimer; /* Workaround Timer */
SK_TIMER HalfDupChkTimer;
#endif /* SK_DIAG */
SK_U32 PPrevShorts; /* Previous Short Counter checking */
SK_U32 PPrevFcs; /* Previous FCS Error Counter checking */
SK_U64 PPrevRx; /* Previous RxOk Counter checking */
SK_U64 PRxLim; /* Previous RxOk Counter checking */
SK_U64 LastOctets; /* For half duplex hang check */
int PLinkResCt; /* Link Restart Counter */
int PAutoNegTimeOut;/* Auto-negotiation timeout current value */
int PAutoNegTOCt; /* Auto-negotiation Timeout Counter */
int PRxQSize; /* Port Rx Queue Size in kB */
int PXSQSize; /* Port Synchronous Transmit Queue Size in kB */
int PXAQSize; /* Port Asynchronous Transmit Queue Size in kB */
SK_U32 PRxQRamStart; /* Receive Queue RAM Buffer Start Address */
SK_U32 PRxQRamEnd; /* Receive Queue RAM Buffer End Address */
SK_U32 PXsQRamStart; /* Sync Tx Queue RAM Buffer Start Address */
SK_U32 PXsQRamEnd; /* Sync Tx Queue RAM Buffer End Address */
SK_U32 PXaQRamStart; /* Async Tx Queue RAM Buffer Start Address */
SK_U32 PXaQRamEnd; /* Async Tx Queue RAM Buffer End Address */
SK_U32 PRxOverCnt; /* Receive Overflow Counter */
int PRxQOff; /* Rx Queue Address Offset */
int PXsQOff; /* Synchronous Tx Queue Address Offset */
int PXaQOff; /* Asynchronous Tx Queue Address Offset */
int PhyType; /* PHY used on this port */
int PState; /* Port status (reset, stop, init, run) */
SK_U16 PhyId1; /* PHY Id1 on this port */
SK_U16 PhyAddr; /* MDIO/MDC PHY address */
SK_U16 PIsave; /* Saved Interrupt status word */
SK_U16 PSsave; /* Saved PHY status word */
SK_U16 PGmANegAdv; /* Saved GPhy AutoNegAdvertisment register */
SK_BOOL PHWLinkUp; /* The hardware Link is up (wiring) */
SK_BOOL PLinkBroken; /* Is Link broken ? */
SK_BOOL PCheckPar; /* Do we check for parity errors ? */
SK_BOOL HalfDupTimerActive;
SK_U8 PLinkCap; /* Link Capabilities */
SK_U8 PLinkModeConf; /* Link Mode configured */
SK_U8 PLinkMode; /* Link Mode currently used */
SK_U8 PLinkModeStatus;/* Link Mode Status */
SK_U8 PLinkSpeedCap; /* Link Speed Capabilities(10/100/1000 Mbps) */
SK_U8 PLinkSpeed; /* configured Link Speed (10/100/1000 Mbps) */
SK_U8 PLinkSpeedUsed; /* current Link Speed (10/100/1000 Mbps) */
SK_U8 PFlowCtrlCap; /* Flow Control Capabilities */
SK_U8 PFlowCtrlMode; /* Flow Control Mode */
SK_U8 PFlowCtrlStatus;/* Flow Control Status */
SK_U8 PMSCap; /* Master/Slave Capabilities */
SK_U8 PMSMode; /* Master/Slave Mode */
SK_U8 PMSStatus; /* Master/Slave Status */
SK_BOOL PAutoNegFail; /* Auto-negotiation fail flag */
SK_U8 PLipaAutoNeg; /* Auto-negotiation possible with Link Partner */
SK_U8 PCableLen; /* Cable Length */
SK_U8 PMdiPairLen[4]; /* MDI[0..3] Pair Length */
SK_U8 PMdiPairSts[4]; /* MDI[0..3] Pair Diagnostic Status */
SK_U8 PPhyPowerState; /* PHY current power state */
int PMacColThres; /* MAC Collision Threshold */
int PMacJamLen; /* MAC Jam length */
int PMacJamIpgVal; /* MAC Jam IPG */
int PMacJamIpgData; /* MAC IPG Jam to Data */
int PMacIpgData; /* MAC Data IPG */
SK_BOOL PMacLimit4; /* reset collision counter and backoff algorithm */
} SK_GEPORT;
/*
* Gigabit Ethernet Initialization Struct
* (has to be included in the adapter context)
*/
typedef struct s_GeInit {
int GIChipId; /* Chip Identification Number */
int GIChipRev; /* Chip Revision Number */
SK_U8 GIPciHwRev; /* PCI HW Revision Number */
SK_BOOL GIGenesis; /* Genesis adapter ? */
SK_BOOL GIYukon; /* YUKON-A1/Bx chip */
SK_BOOL GIYukonLite; /* YUKON-Lite chip */
SK_BOOL GICopperType; /* Copper Type adapter ? */
SK_BOOL GIPciSlot64; /* 64-bit PCI Slot */
SK_BOOL GIPciClock66; /* 66 MHz PCI Clock */
SK_BOOL GIVauxAvail; /* VAUX available (YUKON) */
SK_BOOL GIYukon32Bit; /* 32-Bit YUKON adapter */
SK_U16 GILedBlinkCtrl; /* LED Blink Control */
int GIMacsFound; /* Number of MACs found on this adapter */
int GIMacType; /* MAC Type used on this adapter */
int GIHstClkFact; /* Host Clock Factor (62.5 / HstClk * 100) */
int GIPortUsage; /* Driver Port Usage */
int GILevel; /* Initialization Level completed */
int GIRamSize; /* The RAM size of the adapter in kB */
int GIWolOffs; /* WOL Register Offset (HW-Bug in Rev. A) */
SK_U32 GIRamOffs; /* RAM Address Offset for addr calculation */
SK_U32 GIPollTimerVal; /* Descr. Poll Timer Init Val (HstClk ticks) */
SK_U32 GIValIrqMask; /* Value for Interrupt Mask */
SK_U32 GITimeStampCnt; /* Time Stamp High Counter (YUKON only) */
SK_GEPORT GP[SK_MAX_MACS];/* Port Dependent Information */
SK_GEMACFUNC GIFunc; /* MAC depedent functions */
} SK_GEINIT;
/*
* Error numbers and messages for skxmac2.c and skgeinit.c
*/
#define SKERR_HWI_E001 (SK_ERRBASE_HWINIT)
#define SKERR_HWI_E001MSG "SkXmClrExactAddr() has got illegal parameters"
#define SKERR_HWI_E002 (SKERR_HWI_E001+1)
#define SKERR_HWI_E002MSG "SkGeInit(): Level 1 call missing"
#define SKERR_HWI_E003 (SKERR_HWI_E002+1)
#define SKERR_HWI_E003MSG "SkGeInit() called with illegal init Level"
#define SKERR_HWI_E004 (SKERR_HWI_E003+1)
#define SKERR_HWI_E004MSG "SkGeInitPort(): Queue Size illegal configured"
#define SKERR_HWI_E005 (SKERR_HWI_E004+1)
#define SKERR_HWI_E005MSG "SkGeInitPort(): cannot init running ports"
#define SKERR_HWI_E006 (SKERR_HWI_E005+1)
#define SKERR_HWI_E006MSG "SkGeMacInit(): PState does not match HW state"
#define SKERR_HWI_E007 (SKERR_HWI_E006+1)
#define SKERR_HWI_E007MSG "SkXmInitDupMd() called with invalid Dup Mode"
#define SKERR_HWI_E008 (SKERR_HWI_E007+1)
#define SKERR_HWI_E008MSG "SkXmSetRxCmd() called with invalid Mode"
#define SKERR_HWI_E009 (SKERR_HWI_E008+1)
#define SKERR_HWI_E009MSG "SkGeCfgSync() called although PXSQSize zero"
#define SKERR_HWI_E010 (SKERR_HWI_E009+1)
#define SKERR_HWI_E010MSG "SkGeCfgSync() called with invalid parameters"
#define SKERR_HWI_E011 (SKERR_HWI_E010+1)
#define SKERR_HWI_E011MSG "SkGeInitPort(): Receive Queue Size too small"
#define SKERR_HWI_E012 (SKERR_HWI_E011+1)
#define SKERR_HWI_E012MSG "SkGeInitPort(): invalid Queue Size specified"
#define SKERR_HWI_E013 (SKERR_HWI_E012+1)
#define SKERR_HWI_E013MSG "SkGeInitPort(): cfg changed for running queue"
#define SKERR_HWI_E014 (SKERR_HWI_E013+1)
#define SKERR_HWI_E014MSG "SkGeInitPort(): unknown GIPortUsage specified"
#define SKERR_HWI_E015 (SKERR_HWI_E014+1)
#define SKERR_HWI_E015MSG "Illegal Link mode parameter"
#define SKERR_HWI_E016 (SKERR_HWI_E015+1)
#define SKERR_HWI_E016MSG "Illegal Flow control mode parameter"
#define SKERR_HWI_E017 (SKERR_HWI_E016+1)
#define SKERR_HWI_E017MSG "Illegal value specified for GIPollTimerVal"
#define SKERR_HWI_E018 (SKERR_HWI_E017+1)
#define SKERR_HWI_E018MSG "FATAL: SkGeStopPort() does not terminate (Tx)"
#define SKERR_HWI_E019 (SKERR_HWI_E018+1)
#define SKERR_HWI_E019MSG "Illegal Speed parameter"
#define SKERR_HWI_E020 (SKERR_HWI_E019+1)
#define SKERR_HWI_E020MSG "Illegal Master/Slave parameter"
#define SKERR_HWI_E021 (SKERR_HWI_E020+1)
#define SKERR_HWI_E021MSG "MacUpdateStats(): cannot update statistic counter"
#define SKERR_HWI_E022 (SKERR_HWI_E021+1)
#define SKERR_HWI_E022MSG "MacStatistic(): illegal statistic base address"
#define SKERR_HWI_E023 (SKERR_HWI_E022+1)
#define SKERR_HWI_E023MSG "SkGeInitPort(): Transmit Queue Size too small"
#define SKERR_HWI_E024 (SKERR_HWI_E023+1)
#define SKERR_HWI_E024MSG "FATAL: SkGeStopPort() does not terminate (Rx)"
#define SKERR_HWI_E025 (SKERR_HWI_E024+1)
#define SKERR_HWI_E025MSG ""
/* function prototypes ********************************************************/
#ifndef SK_KR_PROTO
/*
* public functions in skgeinit.c
*/
extern void SkGePollTxD(
SK_AC *pAC,
SK_IOC IoC,
int Port,
SK_BOOL PollTxD);
extern void SkGeYellowLED(
SK_AC *pAC,
SK_IOC IoC,
int State);
extern int SkGeCfgSync(
SK_AC *pAC,
SK_IOC IoC,
int Port,
SK_U32 IntTime,
SK_U32 LimCount,
int SyncMode);
extern void SkGeLoadLnkSyncCnt(
SK_AC *pAC,
SK_IOC IoC,
int Port,
SK_U32 CntVal);
extern void SkGeStopPort(
SK_AC *pAC,
SK_IOC IoC,
int Port,
int Dir,
int RstMode);
extern int SkGeInit(
SK_AC *pAC,
SK_IOC IoC,
int Level);
extern void SkGeDeInit(
SK_AC *pAC,
SK_IOC IoC);
extern int SkGeInitPort(
SK_AC *pAC,
SK_IOC IoC,
int Port);
extern void SkGeXmitLED(
SK_AC *pAC,
SK_IOC IoC,
int Led,
int Mode);
extern int SkGeInitAssignRamToQueues(
SK_AC *pAC,
int ActivePort,
SK_BOOL DualNet);
/*
* public functions in skxmac2.c
*/
extern void SkMacRxTxDisable(
SK_AC *pAC,
SK_IOC IoC,
int Port);
extern void SkMacSoftRst(
SK_AC *pAC,
SK_IOC IoC,
int Port);
extern void SkMacHardRst(
SK_AC *pAC,
SK_IOC IoC,
int Port);
extern void SkXmInitMac(
SK_AC *pAC,
SK_IOC IoC,
int Port);
extern void SkGmInitMac(
SK_AC *pAC,
SK_IOC IoC,
int Port);
extern void SkMacInitPhy(
SK_AC *pAC,
SK_IOC IoC,
int Port,
SK_BOOL DoLoop);
extern void SkMacIrqDisable(
SK_AC *pAC,
SK_IOC IoC,
int Port);
extern void SkMacFlushTxFifo(
SK_AC *pAC,
SK_IOC IoC,
int Port);
extern void SkMacIrq(
SK_AC *pAC,
SK_IOC IoC,
int Port);
extern int SkMacAutoNegDone(
SK_AC *pAC,
SK_IOC IoC,
int Port);
extern void SkMacAutoNegLipaPhy(
SK_AC *pAC,
SK_IOC IoC,
int Port,
SK_U16 IStatus);
extern int SkMacRxTxEnable(
SK_AC *pAC,
SK_IOC IoC,
int Port);
extern void SkMacPromiscMode(
SK_AC *pAC,
SK_IOC IoC,
int Port,
SK_BOOL Enable);
extern void SkMacHashing(
SK_AC *pAC,
SK_IOC IoC,
int Port,
SK_BOOL Enable);
extern void SkXmPhyRead(
SK_AC *pAC,
SK_IOC IoC,
int Port,
int Addr,
SK_U16 SK_FAR *pVal);
extern void SkXmPhyWrite(
SK_AC *pAC,
SK_IOC IoC,
int Port,
int Addr,
SK_U16 Val);
extern void SkGmPhyRead(
SK_AC *pAC,
SK_IOC IoC,
int Port,
int Addr,
SK_U16 SK_FAR *pVal);
extern void SkGmPhyWrite(
SK_AC *pAC,
SK_IOC IoC,
int Port,
int Addr,
SK_U16 Val);
extern void SkXmClrExactAddr(
SK_AC *pAC,
SK_IOC IoC,
int Port,
int StartNum,
int StopNum);
extern void SkXmAutoNegLipaXmac(
SK_AC *pAC,
SK_IOC IoC,
int Port,
SK_U16 IStatus);
extern int SkXmUpdateStats(
SK_AC *pAC,
SK_IOC IoC,
unsigned int Port);
extern int SkGmUpdateStats(
SK_AC *pAC,
SK_IOC IoC,
unsigned int Port);
extern int SkXmMacStatistic(
SK_AC *pAC,
SK_IOC IoC,
unsigned int Port,
SK_U16 StatAddr,
SK_U32 SK_FAR *pVal);
extern int SkGmMacStatistic(
SK_AC *pAC,
SK_IOC IoC,
unsigned int Port,
SK_U16 StatAddr,
SK_U32 SK_FAR *pVal);
extern int SkXmResetCounter(
SK_AC *pAC,
SK_IOC IoC,
unsigned int Port);
extern int SkGmResetCounter(
SK_AC *pAC,
SK_IOC IoC,
unsigned int Port);
extern int SkXmOverflowStatus(
SK_AC *pAC,
SK_IOC IoC,
unsigned int Port,
SK_U16 IStatus,
SK_U64 SK_FAR *pStatus);
extern int SkGmOverflowStatus(
SK_AC *pAC,
SK_IOC IoC,
unsigned int Port,
SK_U16 MacStatus,
SK_U64 SK_FAR *pStatus);
extern int SkGmCableDiagStatus(
SK_AC *pAC,
SK_IOC IoC,
int Port,
SK_BOOL StartTest);
#ifdef SK_DIAG
extern void SkGePhyRead(
SK_AC *pAC,
SK_IOC IoC,
int Port,
int Addr,
SK_U16 *pVal);
extern void SkGePhyWrite(
SK_AC *pAC,
SK_IOC IoC,
int Port,
int Addr,
SK_U16 Val);
extern void SkMacSetRxCmd(
SK_AC *pAC,
SK_IOC IoC,
int Port,
int Mode);
extern void SkMacCrcGener(
SK_AC *pAC,
SK_IOC IoC,
int Port,
SK_BOOL Enable);
extern void SkMacTimeStamp(
SK_AC *pAC,
SK_IOC IoC,
int Port,
SK_BOOL Enable);
extern void SkXmSendCont(
SK_AC *pAC,
SK_IOC IoC,
int Port,
SK_BOOL Enable);
#endif /* SK_DIAG */
#else /* SK_KR_PROTO */
/*
* public functions in skgeinit.c
*/
extern void SkGePollTxD();
extern void SkGeYellowLED();
extern int SkGeCfgSync();
extern void SkGeLoadLnkSyncCnt();
extern void SkGeStopPort();
extern int SkGeInit();
extern void SkGeDeInit();
extern int SkGeInitPort();
extern void SkGeXmitLED();
extern int SkGeInitAssignRamToQueues();
/*
* public functions in skxmac2.c
*/
extern void SkMacRxTxDisable();
extern void SkMacSoftRst();
extern void SkMacHardRst();
extern void SkMacInitPhy();
extern int SkMacRxTxEnable();
extern void SkMacPromiscMode();
extern void SkMacHashing();
extern void SkMacIrqDisable();
extern void SkMacFlushTxFifo();
extern void SkMacIrq();
extern int SkMacAutoNegDone();
extern void SkMacAutoNegLipaPhy();
extern void SkXmInitMac();
extern void SkXmPhyRead();
extern void SkXmPhyWrite();
extern void SkGmInitMac();
extern void SkGmPhyRead();
extern void SkGmPhyWrite();
extern void SkXmClrExactAddr();
extern void SkXmAutoNegLipaXmac();
extern int SkXmUpdateStats();
extern int SkGmUpdateStats();
extern int SkXmMacStatistic();
extern int SkGmMacStatistic();
extern int SkXmResetCounter();
extern int SkGmResetCounter();
extern int SkXmOverflowStatus();
extern int SkGmOverflowStatus();
extern int SkGmCableDiagStatus();
#ifdef SK_DIAG
extern void SkGePhyRead();
extern void SkGePhyWrite();
extern void SkMacSetRxCmd();
extern void SkMacCrcGener();
extern void SkMacTimeStamp();
extern void SkXmSendCont();
#endif /* SK_DIAG */
#endif /* SK_KR_PROTO */
#ifdef __cplusplus
}
#endif /* __cplusplus */
#endif /* __INC_SKGEINIT_H_ */
