/******************************************************************************
*
* Name: skgehw.h
* Project: Gigabit Ethernet Adapters, Common Modules
* Version: $Revision: 1.56 $
* Date: $Date: 2003/09/23 09:01:00 $
* Purpose: Defines and Macros for the Gigabit Ethernet Adapter Product Family
*
******************************************************************************/
/******************************************************************************
*
* (C)Copyright 1998-2002 SysKonnect.
* (C)Copyright 2002-2003 Marvell.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* The information in this file is provided "AS IS" without warranty.
*
******************************************************************************/
#ifndef __INC_SKGEHW_H
#define __INC_SKGEHW_H
#ifdef __cplusplus
extern "C" {
#endif /* __cplusplus */
/* defines ********************************************************************/
#define BIT_31 (1UL << 31)
#define BIT_30 (1L << 30)
#define BIT_29 (1L << 29)
#define BIT_28 (1L << 28)
#define BIT_27 (1L << 27)
#define BIT_26 (1L << 26)
#define BIT_25 (1L << 25)
#define BIT_24 (1L << 24)
#define BIT_23 (1L << 23)
#define BIT_22 (1L << 22)
#define BIT_21 (1L << 21)
#define BIT_20 (1L << 20)
#define BIT_19 (1L << 19)
#define BIT_18 (1L << 18)
#define BIT_17 (1L << 17)
#define BIT_16 (1L << 16)
#define BIT_15 (1L << 15)
#define BIT_14 (1L << 14)
#define BIT_13 (1L << 13)
#define BIT_12 (1L << 12)
#define BIT_11 (1L << 11)
#define BIT_10 (1L << 10)
#define BIT_9 (1L << 9)
#define BIT_8 (1L << 8)
#define BIT_7 (1L << 7)
#define BIT_6 (1L << 6)
#define BIT_5 (1L << 5)
#define BIT_4 (1L << 4)
#define BIT_3 (1L << 3)
#define BIT_2 (1L << 2)
#define BIT_1 (1L << 1)
#define BIT_0 1L
#define BIT_15S (1U << 15)
#define BIT_14S (1 << 14)
#define BIT_13S (1 << 13)
#define BIT_12S (1 << 12)
#define BIT_11S (1 << 11)
#define BIT_10S (1 << 10)
#define BIT_9S (1 << 9)
#define BIT_8S (1 << 8)
#define BIT_7S (1 << 7)
#define BIT_6S (1 << 6)
#define BIT_5S (1 << 5)
#define BIT_4S (1 << 4)
#define BIT_3S (1 << 3)
#define BIT_2S (1 << 2)
#define BIT_1S (1 << 1)
#define BIT_0S 1
#define SHIFT31(x) ((x) << 31)
#define SHIFT30(x) ((x) << 30)
#define SHIFT29(x) ((x) << 29)
#define SHIFT28(x) ((x) << 28)
#define SHIFT27(x) ((x) << 27)
#define SHIFT26(x) ((x) << 26)
#define SHIFT25(x) ((x) << 25)
#define SHIFT24(x) ((x) << 24)
#define SHIFT23(x) ((x) << 23)
#define SHIFT22(x) ((x) << 22)
#define SHIFT21(x) ((x) << 21)
#define SHIFT20(x) ((x) << 20)
#define SHIFT19(x) ((x) << 19)
#define SHIFT18(x) ((x) << 18)
#define SHIFT17(x) ((x) << 17)
#define SHIFT16(x) ((x) << 16)
#define SHIFT15(x) ((x) << 15)
#define SHIFT14(x) ((x) << 14)
#define SHIFT13(x) ((x) << 13)
#define SHIFT12(x) ((x) << 12)
#define SHIFT11(x) ((x) << 11)
#define SHIFT10(x) ((x) << 10)
#define SHIFT9(x) ((x) << 9)
#define SHIFT8(x) ((x) << 8)
#define SHIFT7(x) ((x) << 7)
#define SHIFT6(x) ((x) << 6)
#define SHIFT5(x) ((x) << 5)
#define SHIFT4(x) ((x) << 4)
#define SHIFT3(x) ((x) << 3)
#define SHIFT2(x) ((x) << 2)
#define SHIFT1(x) ((x) << 1)
#define SHIFT0(x) ((x) << 0)
/*
* Configuration Space header
* Since this module is used for different OS', those may be
* duplicate on some of them (e.g. Linux). But to keep the
* common source, we have to live with this...
*/
#define PCI_VENDOR_ID 0x00 /* 16 bit Vendor ID */
#define PCI_DEVICE_ID 0x02 /* 16 bit Device ID */
#define PCI_COMMAND 0x04 /* 16 bit Command */
#define PCI_STATUS 0x06 /* 16 bit Status */
#define PCI_REV_ID 0x08 /* 8 bit Revision ID */
#define PCI_CLASS_CODE 0x09 /* 24 bit Class Code */
#define PCI_CACHE_LSZ 0x0c /* 8 bit Cache Line Size */
#define PCI_LAT_TIM 0x0d /* 8 bit Latency Timer */
#define PCI_HEADER_T 0x0e /* 8 bit Header Type */
#define PCI_BIST 0x0f /* 8 bit Built-in selftest */
#define PCI_BASE_1ST 0x10 /* 32 bit 1st Base address */
#define PCI_BASE_2ND 0x14 /* 32 bit 2nd Base address */
/* Byte 0x18..0x2b: reserved */
#define PCI_SUB_VID 0x2c /* 16 bit Subsystem Vendor ID */
#define PCI_SUB_ID 0x2e /* 16 bit Subsystem ID */
#define PCI_BASE_ROM 0x30 /* 32 bit Expansion ROM Base Address */
#define PCI_CAP_PTR 0x34 /* 8 bit Capabilities Ptr */
/* Byte 0x35..0x3b: reserved */
#define PCI_IRQ_LINE 0x3c /* 8 bit Interrupt Line */
#define PCI_IRQ_PIN 0x3d /* 8 bit Interrupt Pin */
#define PCI_MIN_GNT 0x3e /* 8 bit Min_Gnt */
#define PCI_MAX_LAT 0x3f /* 8 bit Max_Lat */
/* Device Dependent Region */
#define PCI_OUR_REG_1 0x40 /* 32 bit Our Register 1 */
#define PCI_OUR_REG_2 0x44 /* 32 bit Our Register 2 */
/* Power Management Region */
#define PCI_PM_CAP_ID 0x48 /* 8 bit Power Management Cap. ID */
#define PCI_PM_NITEM 0x49 /* 8 bit Next Item Ptr */
#define PCI_PM_CAP_REG 0x4a /* 16 bit Power Management Capabilities */
#define PCI_PM_CTL_STS 0x4c /* 16 bit Power Manag. Control/Status */
/* Byte 0x4e: reserved */
#define PCI_PM_DAT_REG 0x4f /* 8 bit Power Manag. Data Register */
/* VPD Region */
#define PCI_VPD_CAP_ID 0x50 /* 8 bit VPD Cap. ID */
#define PCI_VPD_NITEM 0x51 /* 8 bit Next Item Ptr */
#define PCI_VPD_ADR_REG 0x52 /* 16 bit VPD Address Register */
#define PCI_VPD_DAT_REG 0x54 /* 32 bit VPD Data Register */
/* Byte 0x58..0x59: reserved */
#define PCI_SER_LD_CTRL 0x5a /* 16 bit SEEPROM Loader Ctrl (YUKON only) */
/* Byte 0x5c..0xff: reserved */
/*
* I2C Address (PCI Config)
*
* Note: The temperature and voltage sensors are relocated on a different
* I2C bus.
*/
#define I2C_ADDR_VPD 0xa0 /* I2C address for the VPD EEPROM */
/*
* Define Bits and Values of the registers
*/
/* PCI_COMMAND 16 bit Command */
/* Bit 15..11: reserved */
#define PCI_INT_DIS BIT_10S /* Interrupt INTx# disable (PCI 2.3) */
#define PCI_FBTEN BIT_9S /* Fast Back-To-Back enable */
#define PCI_SERREN BIT_8S /* SERR enable */
#define PCI_ADSTEP BIT_7S /* Address Stepping */
#define PCI_PERREN BIT_6S /* Parity Report Response enable */
#define PCI_VGA_SNOOP BIT_5S /* VGA palette snoop */
#define PCI_MWIEN BIT_4S /* Memory write an inv cycl ena */
#define PCI_SCYCEN BIT_3S /* Special Cycle enable */
#define PCI_BMEN BIT_2S /* Bus Master enable */
#define PCI_MEMEN BIT_1S /* Memory Space Access enable */
#define PCI_IOEN BIT_0S /* I/O Space Access enable */
#define PCI_COMMAND_VAL (PCI_FBTEN | PCI_SERREN | PCI_PERREN | PCI_MWIEN |\
PCI_BMEN | PCI_MEMEN | PCI_IOEN)
/* PCI_STATUS 16 bit Status */
#define PCI_PERR BIT_15S /* Parity Error */
#define PCI_SERR BIT_14S /* Signaled SERR */
#define PCI_RMABORT BIT_13S /* Received Master Abort */
#define PCI_RTABORT BIT_12S /* Received Target Abort */
/* Bit 11: reserved */
#define PCI_DEVSEL (3<<9) /* Bit 10.. 9: DEVSEL Timing */
#define PCI_DEV_FAST (0<<9) /* fast */
#define PCI_DEV_MEDIUM (1<<9) /* medium */
#define PCI_DEV_SLOW (2<<9) /* slow */
#define PCI_DATAPERR BIT_8S /* DATA Parity error detected */
#define PCI_FB2BCAP BIT_7S /* Fast Back-to-Back Capability */
#define PCI_UDF BIT_6S /* User Defined Features */
#define PCI_66MHZCAP BIT_5S /* 66 MHz PCI bus clock capable */
#define PCI_NEWCAP BIT_4S /* New cap. list implemented */
#define PCI_INT_STAT BIT_3S /* Interrupt INTx# Status (PCI 2.3) */
/* Bit 2.. 0: reserved */
#define PCI_ERRBITS (PCI_PERR | PCI_SERR | PCI_RMABORT | PCI_RTABORT |\
PCI_DATAPERR)
/* PCI_CLASS_CODE 24 bit Class Code */
/* Byte 2: Base Class (02) */
/* Byte 1: SubClass (00) */
/* Byte 0: Programming Interface (00) */
/* PCI_CACHE_LSZ 8 bit Cache Line Size */
/* Possible values: 0,2,4,8,16,32,64,128 */
/* PCI_HEADER_T 8 bit Header Type */
#define PCI_HD_MF_DEV BIT_7S /* 0= single, 1= multi-func dev */
#define PCI_HD_TYPE 0x7f /* Bit 6..0: Header Layout 0= normal */
/* PCI_BIST 8 bit Built-in selftest */
/* Built-in Self test not supported (optional) */
/* PCI_BASE_1ST 32 bit 1st Base address */
#define PCI_MEMSIZE 0x4000L /* use 16 kB Memory Base */
#define PCI_MEMBASE_MSK 0xffffc000L /* Bit 31..14: Memory Base Address */
#define PCI_MEMSIZE_MSK 0x00003ff0L /* Bit 13.. 4: Memory Size Req. */
#define PCI_PREFEN BIT_3 /* Prefetchable */
#define PCI_MEM_TYP (3L<<2) /* Bit 2.. 1: Memory Type */
#define PCI_MEM32BIT (0L<<1) /* Base addr anywhere in 32 Bit range */
#define PCI_MEM1M (1L<<1) /* Base addr below 1 MegaByte */
#define PCI_MEM64BIT (2L<<1) /* Base addr anywhere in 64 Bit range */
#define PCI_MEMSPACE BIT_0 /* Memory Space Indicator */
/* PCI_BASE_2ND 32 bit 2nd Base address */
#define PCI_IOBASE 0xffffff00L /* Bit 31.. 8: I/O Base address */
#define PCI_IOSIZE 0x000000fcL /* Bit 7.. 2: I/O Size Requirements */
/* Bit 1: reserved */
#define PCI_IOSPACE BIT_0 /* I/O Space Indicator */
/* PCI_BASE_ROM 32 bit Expansion ROM Base Address */
#define PCI_ROMBASE_MSK 0xfffe0000L /* Bit 31..17: ROM Base address */
#define PCI_ROMBASE_SIZ (0x1cL<<14) /* Bit 16..14: Treat as Base or Size */
#define PCI_ROMSIZE (0x38L<<11) /* Bit 13..11: ROM Size Requirements */
/* Bit 10.. 1: reserved */
#define PCI_ROMEN BIT_0 /* Address Decode enable */
/* Device Dependent Region */
/* PCI_OUR_REG_1 32 bit Our Register 1 */
/* Bit 31..29: reserved */
#define PCI_PHY_COMA BIT_28 /* Set PHY to Coma Mode (YUKON only) */
#define PCI_TEST_CAL BIT_27 /* Test PCI buffer calib. (YUKON only) */
#define PCI_EN_CAL BIT_26 /* Enable PCI buffer calib. (YUKON only) */
#define PCI_VIO BIT_25 /* PCI I/O Voltage, 0 = 3.3V, 1 = 5V */
#define PCI_DIS_BOOT BIT_24 /* Disable BOOT via ROM */
#define PCI_EN_IO BIT_23 /* Mapping to I/O space */
#define PCI_EN_FPROM BIT_22 /* Enable FLASH mapping to memory */
/* 1 = Map Flash to memory */
/* 0 = Disable addr. dec */
#define PCI_PAGESIZE (3L<<20) /* Bit 21..20: FLASH Page Size */
#define PCI_PAGE_16 (0L<<20) /* 16 k pages */
#define PCI_PAGE_32K (1L<<20) /* 32 k pages */
#define PCI_PAGE_64K (2L<<20) /* 64 k pages */
#define PCI_PAGE_128K (3L<<20) /* 128 k pages */
/* Bit 19: reserved */
#define PCI_PAGEREG (7L<<16) /* Bit 18..16: Page Register */
#define PCI_NOTAR BIT_15 /* No turnaround cycle */
#define PCI_FORCE_BE BIT_14 /* Assert all BEs on MR */
#define PCI_DIS_MRL BIT_13 /* Disable Mem Read Line */
#define PCI_DIS_MRM BIT_12 /* Disable Mem Read Multiple */
#define PCI_DIS_MWI BIT_11 /* Disable Mem Write & Invalidate */
#define PCI_DISC_CLS BIT_10 /* Disc: cacheLsz bound */
#define PCI_BURST_DIS BIT_9 /* Burst Disable */
#define PCI_DIS_PCI_CLK BIT_8 /* Disable PCI clock driving */
#define PCI_SKEW_DAS (0xfL<<4) /* Bit 7.. 4: Skew Ctrl, DAS Ext */
#define PCI_SKEW_BASE 0xfL /* Bit 3.. 0: Skew Ctrl, Base */
/* PCI_OUR_REG_2 32 bit Our Register 2 */
#define PCI_VPD_WR_THR (0xffL<<24) /* Bit 31..24: VPD Write Threshold */
#define PCI_DEV_SEL (0x7fL<<17) /* Bit 23..17: EEPROM Device Select */
#define PCI_VPD_ROM_SZ (7L<<14) /* Bit 16..14: VPD ROM Size */
/* Bit 13..12: reserved */
#define PCI_PATCH_DIR (0xfL<<8) /* Bit 11.. 8: Ext Patches dir 3..0 */
#define PCI_PATCH_DIR_3 BIT_11
#define PCI_PATCH_DIR_2 BIT_10
#define PCI_PATCH_DIR_1 BIT_9
#define PCI_PATCH_DIR_0 BIT_8
#define PCI_EXT_PATCHS (0xfL<<4) /* Bit 7.. 4: Extended Patches 3..0 */
#define PCI_EXT_PATCH_3 BIT_7
#define PCI_EXT_PATCH_2 BIT_6
#define PCI_EXT_PATCH_1 BIT_5
#define PCI_EXT_PATCH_0 BIT_4
#define PCI_EN_DUMMY_RD BIT_3 /* Enable Dummy Read */
#define PCI_REV_DESC BIT_2 /* Reverse Desc. Bytes */
/* Bit 1: reserved */
#define PCI_USEDATA64 BIT_0 /* Use 64Bit Data bus ext */
/* Power Management Region */
/* PCI_PM_CAP_REG 16 bit Power Management Capabilities */
#define PCI_PME_SUP_MSK (0x1f<<11) /* Bit 15..11: PM Event Support Mask */
#define PCI_PME_D3C_SUP BIT_15S /* PME from D3cold Support (if Vaux) */
#define PCI_PME_D3H_SUP BIT_14S /* PME from D3hot Support */
#define PCI_PME_D2_SUP BIT_13S /* PME from D2 Support */
#define PCI_PME_D1_SUP BIT_12S /* PME from D1 Support */
#define PCI_PME_D0_SUP BIT_11S /* PME from D0 Support */
#define PCI_PM_D2_SUP BIT_10S /* D2 Support in 33 MHz mode */
#define PCI_PM_D1_SUP BIT_9S /* D1 Support */
/* Bit 8.. 6: reserved */
#define PCI_PM_DSI BIT_5S /* Device Specific Initialization */
#define PCI_PM_APS BIT_4S /* Auxialiary Power Source */
#define PCI_PME_CLOCK BIT_3S /* PM Event Clock */
#define PCI_PM_VER_MSK 7 /* Bit 2.. 0: PM PCI Spec. version */
/* PCI_PM_CTL_STS 16 bit Power Management Control/Status */
#define PCI_PME_STATUS BIT_15S /* PME Status (YUKON only) */
#define PCI_PM_DAT_SCL (3<<13) /* Bit 14..13: Data Reg. scaling factor */
#define PCI_PM_DAT_SEL (0xf<<9) /* Bit 12.. 9: PM data selector field */
#define PCI_PME_EN BIT_8S /* Enable PME# generation (YUKON only) */
/* Bit 7.. 2: reserved */
#define PCI_PM_STATE_MSK 3 /* Bit 1.. 0: Power Management State */
#define PCI_PM_STATE_D0 0 /* D0: Operational (default) */
#define PCI_PM_STATE_D1 1 /* D1: (YUKON only) */
#define PCI_PM_STATE_D2 2 /* D2: (YUKON only) */
#define PCI_PM_STATE_D3 3 /* D3: HOT, Power Down and Reset */
/* VPD Region */
/* PCI_VPD_ADR_REG 16 bit VPD Address Register */
#define PCI_VPD_FLAG BIT_15S /* starts VPD rd/wr cycle */
#define PCI_VPD_ADR_MSK 0x7fffL /* Bit 14.. 0: VPD address mask */
/* Control Register File (Address Map) */
/*
* Bank 0
*/
#define B0_RAP 0x0000 /* 8 bit Register Address Port */
/* 0x0001 - 0x0003: reserved */
#define B0_CTST 0x0004 /* 16 bit Control/Status register */
#define B0_LED 0x0006 /* 8 Bit LED register */
#define B0_POWER_CTRL 0x0007 /* 8 Bit Power Control reg (YUKON only) */
#define B0_ISRC 0x0008 /* 32 bit Interrupt Source Register */
#define B0_IMSK 0x000c /* 32 bit Interrupt Mask Register */
#define B0_HWE_ISRC 0x0010 /* 32 bit HW Error Interrupt Src Reg */
#define B0_HWE_IMSK 0x0014 /* 32 bit HW Error Interrupt Mask Reg */
#define B0_SP_ISRC 0x0018 /* 32 bit Special Interrupt Source Reg */
/* 0x001c: reserved */
/* B0 XMAC 1 registers (GENESIS only) */
#define B0_XM1_IMSK 0x0020 /* 16 bit r/w XMAC 1 Interrupt Mask Register*/
/* 0x0022 - 0x0027: reserved */
#define B0_XM1_ISRC 0x0028 /* 16 bit ro XMAC 1 Interrupt Status Reg */
/* 0x002a - 0x002f: reserved */
#define B0_XM1_PHY_ADDR 0x0030 /* 16 bit r/w XMAC 1 PHY Address Register */
/* 0x0032 - 0x0033: reserved */
#define B0_XM1_PHY_DATA 0x0034 /* 16 bit r/w XMAC 1 PHY Data Register */
/* 0x0036 - 0x003f: reserved */
/* B0 XMAC 2 registers (GENESIS only) */
#define B0_XM2_IMSK 0x0040 /* 16 bit r/w XMAC 2 Interrupt Mask Register*/
/* 0x0042 - 0x0047: reserved */
#define B0_XM2_ISRC 0x0048 /* 16 bit ro XMAC 2 Interrupt Status Reg */
/* 0x004a - 0x004f: reserved */
#define B0_XM2_PHY_ADDR 0x0050 /* 16 bit r/w XMAC 2 PHY Address Register */
/* 0x0052 - 0x0053: reserved */
#define B0_XM2_PHY_DATA 0x0054 /* 16 bit r/w XMAC 2 PHY Data Register */
/* 0x0056 - 0x005f: reserved */
/* BMU Control Status Registers */
#define B0_R1_CSR 0x0060 /* 32 bit BMU Ctrl/Stat Rx Queue 1 */
#define B0_R2_CSR 0x0064 /* 32 bit BMU Ctrl/Stat Rx Queue 2 */
#define B0_XS1_CSR 0x0068 /* 32 bit BMU Ctrl/Stat Sync Tx Queue 1 */
#define B0_XA1_CSR 0x006c /* 32 bit BMU Ctrl/Stat Async Tx Queue 1*/
#define B0_XS2_CSR 0x0070 /* 32 bit BMU Ctrl/Stat Sync Tx Queue 2 */
#define B0_XA2_CSR 0x0074 /* 32 bit BMU Ctrl/Stat Async Tx Queue 2*/
/* 0x0078 - 0x007f: reserved */
/*
* Bank 1
* - completely empty (this is the RAP Block window)
* Note: if RAP = 1 this page is reserved
*/
/*
* Bank 2
*/
/* NA reg = 48 bit Network Address Register, 3x16 or 8x8 bit readable */
#define B2_MAC_1 0x0100 /* NA reg MAC Address 1 */
/* 0x0106 - 0x0107: reserved */
#define B2_MAC_2 0x0108 /* NA reg MAC Address 2 */
/* 0x010e - 0x010f: reserved */
#define B2_MAC_3 0x0110 /* NA reg MAC Address 3 */
/* 0x0116 - 0x0117: reserved */
#define B2_CONN_TYP 0x0118 /* 8 bit Connector type */
#define B2_PMD_TYP 0x0119 /* 8 bit PMD type */
#define B2_MAC_CFG 0x011a /* 8 bit MAC Configuration / Chip Revision */
#define B2_CHIP_ID 0x011b /* 8 bit Chip Identification Number */
/* Eprom registers are currently of no use */
#define B2_E_0 0x011c /* 8 bit EPROM Byte 0 (ext. SRAM size */
#define B2_E_1 0x011d /* 8 bit EPROM Byte 1 (PHY type) */
#define B2_E_2 0x011e /* 8 bit EPROM Byte 2 */
#define B2_E_3 0x011f /* 8 bit EPROM Byte 3 */
#define B2_FAR 0x0120 /* 32 bit Flash-Prom Addr Reg/Cnt */
#define B2_FDP 0x0124 /* 8 bit Flash-Prom Data Port */
/* 0x0125 - 0x0127: reserved */
#define B2_LD_CTRL 0x0128 /* 8 bit EPROM loader control register */
#define B2_LD_TEST 0x0129 /* 8 bit EPROM loader test register */
/* 0x012a - 0x012f: reserved */
#define B2_TI_INI 0x0130 /* 32 bit Timer Init Value */
#define B2_TI_VAL 0x0134 /* 32 bit Timer Value */
#define B2_TI_CTRL 0x0138 /* 8 bit Timer Control */
#define B2_TI_TEST 0x0139 /* 8 Bit Timer Test */
/* 0x013a - 0x013f: reserved */
#define B2_IRQM_INI 0x0140 /* 32 bit IRQ Moderation Timer Init Reg.*/
#define B2_IRQM_VAL 0x0144 /* 32 bit IRQ Moderation Timer Value */
#define B2_IRQM_CTRL 0x0148 /* 8 bit IRQ Moderation Timer Control */
#define B2_IRQM_TEST 0x0149 /* 8 bit IRQ Moderation Timer Test */
#define B2_IRQM_MSK 0x014c /* 32 bit IRQ Moderation Mask */
#define B2_IRQM_HWE_MSK 0x0150 /* 32 bit IRQ Moderation HW Error Mask */
/* 0x0154 - 0x0157: reserved */
#define B2_TST_CTRL1 0x0158 /* 8 bit Test Control Register 1 */
#define B2_TST_CTRL2 0x0159 /* 8 bit Test Control Register 2 */
/* 0x015a - 0x015b: reserved */
#define B2_GP_IO 0x015c /* 32 bit General Purpose I/O Register */
#define B2_I2C_CTRL 0x0160 /* 32 bit I2C HW Control Register */
#define B2_I2C_DATA 0x0164 /* 32 bit I2C HW Data Register */
#define B2_I2C_IRQ 0x0168 /* 32 bit I2C HW IRQ Register */
#define B2_I2C_SW 0x016c /* 32 bit I2C SW Port Register */
/* Blink Source Counter (GENESIS only) */
#define B2_BSC_INI 0x0170 /* 32 bit Blink Source Counter Init Val */
#define B2_BSC_VAL 0x0174 /* 32 bit Blink Source Counter Value */
#define B2_BSC_CTRL 0x0178 /* 8 bit Blink Source Counter Control */
#define B2_BSC_STAT 0x0179 /* 8 bit Blink Source Counter Status */
#define B2_BSC_TST 0x017a /* 16 bit Blink Source Counter Test Reg */
/* 0x017c - 0x017f: reserved */
/*
* Bank 3
*/
/* RAM Random Registers */
#define B3_RAM_ADDR 0x0180 /* 32 bit RAM Address, to read or write */
#define B3_RAM_DATA_LO 0x0184 /* 32 bit RAM Data Word (low dWord) */
#define B3_RAM_DATA_HI 0x0188 /* 32 bit RAM Data Word (high dWord) */
/* 0x018c - 0x018f: reserved */
/* RAM Interface Registers */
/*
* The HW-Spec. calls this registers Timeout Value 0..11. But this names are
* not usable in SW. Please notice these are NOT real timeouts, these are
* the number of qWords transferred continuously.
*/
#define B3_RI_WTO_R1 0x0190 /* 8 bit WR Timeout Queue R1 (TO0) */
#define B3_RI_WTO_XA1 0x0191 /* 8 bit WR Timeout Queue XA1 (TO1) */
#define B3_RI_WTO_XS1 0x0192 /* 8 bit WR Timeout Queue XS1 (TO2) */
#define B3_RI_RTO_R1 0x0193 /* 8 bit RD Timeout Queue R1 (TO3) */
#define B3_RI_RTO_XA1 0x0194 /* 8 bit RD Timeout Queue XA1 (TO4) */
#define B3_RI_RTO_XS1 0x0195 /* 8 bit RD Timeout Queue XS1 (TO5) */
#define B3_RI_WTO_R2 0x0196 /* 8 bit WR Timeout Queue R2 (TO6) */
#define B3_RI_WTO_XA2 0x0197 /* 8 bit WR Timeout Queue XA2 (TO7) */
#define B3_RI_WTO_XS2 0x0198 /* 8 bit WR Timeout Queue XS2 (TO8) */
#define B3_RI_RTO_R2 0x0199 /* 8 bit RD Timeout Queue R2 (TO9) */
#define B3_RI_RTO_XA2 0x019a /* 8 bit RD Timeout Queue XA2 (TO10)*/
#define B3_RI_RTO_XS2 0x019b /* 8 bit RD Timeout Queue XS2 (TO11)*/
#define B3_RI_TO_VAL 0x019c /* 8 bit Current Timeout Count Val */
/* 0x019d - 0x019f: reserved */
#define B3_RI_CTRL 0x01a0 /* 16 bit RAM Interface Control Register */
#define B3_RI_TEST 0x01a2 /* 8 bit RAM Interface Test Register */
/* 0x01a3 - 0x01af: reserved */
/* MAC Arbiter Registers (GENESIS only) */
/* these are the no. of qWord transferred continuously and NOT real timeouts */
#define B3_MA_TOINI_RX1 0x01b0 /* 8 bit Timeout Init Val Rx Path MAC 1 */
#define B3_MA_TOINI_RX2 0x01b1 /* 8 bit Timeout Init Val Rx Path MAC 2 */
#define B3_MA_TOINI_TX1 0x01b2 /* 8 bit Timeout Init Val Tx Path MAC 1 */
#define B3_MA_TOINI_TX2 0x01b3 /* 8 bit Timeout Init Val Tx Path MAC 2 */
#define B3_MA_TOVAL_RX1 0x01b4 /* 8 bit Timeout Value Rx Path MAC 1 */
#define B3_MA_TOVAL_RX2 0x01b5 /* 8 bit Timeout Value Rx Path MAC 1 */
#define B3_MA_TOVAL_TX1 0x01b6 /* 8 bit Timeout Value Tx Path MAC 2 */
#define B3_MA_TOVAL_TX2 0x01b7 /* 8 bit Timeout Value Tx Path MAC 2 */
#define B3_MA_TO_CTRL 0x01b8 /* 16 bit MAC Arbiter Timeout Ctrl Reg */
#define B3_MA_TO_TEST 0x01ba /* 16 bit MAC Arbiter Timeout Test Reg */
/* 0x01bc - 0x01bf: reserved */
#define B3_MA_RCINI_RX1 0x01c0 /* 8 bit Recovery Init Val Rx Path MAC 1 */
#define B3_MA_RCINI_RX2 0x01c1 /* 8 bit Recovery Init Val Rx Path MAC 2 */
#define B3_MA_RCINI_TX1 0x01c2 /* 8 bit Recovery Init Val Tx Path MAC 1 */
#define B3_MA_RCINI_TX2 0x01c3 /* 8 bit Recovery Init Val Tx Path MAC 2 */
#define B3_MA_RCVAL_RX1 0x01c4 /* 8 bit Recovery Value Rx Path MAC 1 */
#define B3_MA_RCVAL_RX2 0x01c5 /* 8 bit Recovery Value Rx Path MAC 1 */
#define B3_MA_RCVAL_TX1 0x01c6 /* 8 bit Recovery Value Tx Path MAC 2 */
#define B3_MA_RCVAL_TX2 0x01c7 /* 8 bit Recovery Value Tx Path MAC 2 */
#define B3_MA_RC_CTRL 0x01c8 /* 16 bit MAC Arbiter Recovery Ctrl Reg */
#define B3_MA_RC_TEST 0x01ca /* 16 bit MAC Arbiter Recovery Test Reg */
/* 0x01cc - 0x01cf: reserved */
/* Packet Arbiter Registers (GENESIS only) */
/* these are real timeouts */
#define B3_PA_TOINI_RX1 0x01d0 /* 16 bit Timeout Init Val Rx Path MAC 1 */
/* 0x01d2 - 0x01d3: reserved */
#define B3_PA_TOINI_RX2 0x01d4 /* 16 bit Timeout Init Val Rx Path MAC 2 */
/* 0x01d6 - 0x01d7: reserved */
#define B3_PA_TOINI_TX1 0x01d8 /* 16 bit Timeout Init Val Tx Path MAC 1 */
/* 0x01da - 0x01db: reserved */
#define B3_PA_TOINI_TX2 0x01dc /* 16 bit Timeout Init Val Tx Path MAC 2 */
/* 0x01de - 0x01df: reserved */
#define B3_PA_TOVAL_RX1 0x01e0 /* 16 bit Timeout Val Rx Path MAC 1 */
/* 0x01e2 - 0x01e3: reserved */
#define B3_PA_TOVAL_RX2 0x01e4 /* 16 bit Timeout Val Rx Path MAC 2 */
/* 0x01e6 - 0x01e7: reserved */
#define B3_PA_TOVAL_TX1 0x01e8 /* 16 bit Timeout Val Tx Path MAC 1 */
/* 0x01ea - 0x01eb: reserved */
#define B3_PA_TOVAL_TX2 0x01ec /* 16 bit Timeout Val Tx Path MAC 2 */
/* 0x01ee - 0x01ef: reserved */
#define B3_PA_CTRL 0x01f0 /* 16 bit Packet Arbiter Ctrl Register */
#define B3_PA_TEST 0x01f2 /* 16 bit Packet Arbiter Test Register */
/* 0x01f4 - 0x01ff: reserved */
/*
* Bank 4 - 5
*/
/* Transmit Arbiter Registers MAC 1 and 2, use MR_ADDR() to access */
#define TXA_ITI_INI 0x0200 /* 32 bit Tx Arb Interval Timer Init Val*/
#define TXA_ITI_VAL 0x0204 /* 32 bit Tx Arb Interval Timer Value */
#define TXA_LIM_INI 0x0208 /* 32 bit Tx Arb Limit Counter Init Val */
#define TXA_LIM_VAL 0x020c /* 32 bit Tx Arb Limit Counter Value */
#define TXA_CTRL 0x0210 /* 8 bit Tx Arbiter Control Register */
#define TXA_TEST 0x0211 /* 8 bit Tx Arbiter Test Register */
#define TXA_STAT 0x0212 /* 8 bit Tx Arbiter Status Register */
/* 0x0213 - 0x027f: reserved */
/* 0x0280 - 0x0292: MAC 2 */
/* 0x0213 - 0x027f: reserved */
/*
* Bank 6
*/
/* External registers (GENESIS only) */
#define B6_EXT_REG 0x0300
/*
* Bank 7
*/
/* This is a copy of the Configuration register file (lower half) */
#define B7_CFG_SPC 0x0380
/*
* Bank 8 - 15
*/
/* Receive and Transmit Queue Registers, use Q_ADDR() to access */
#define B8_Q_REGS 0x0400
/* Queue Register Offsets, use Q_ADDR() to access */
#define Q_D 0x00 /* 8*32 bit Current Descriptor */
#define Q_DA_L 0x20 /* 32 bit Current Descriptor Address Low dWord */
#define Q_DA_H 0x24 /* 32 bit Current Descriptor Address High dWord */
#define Q_AC_L 0x28 /* 32 bit Current Address Counter Low dWord */
#define Q_AC_H 0x2c /* 32 bit Current Address Counter High dWord */
#define Q_BC 0x30 /* 32 bit Current Byte Counter */
#define Q_CSR 0x34 /* 32 bit BMU Control/Status Register */
#define Q_F 0x38 /* 32 bit Flag Register */
#define Q_T1 0x3c /* 32 bit Test Register 1 */
#define Q_T1_TR 0x3c /* 8 bit Test Register 1 Transfer SM */
#define Q_T1_WR 0x3d /* 8 bit Test Register 1 Write Descriptor SM */
#define Q_T1_RD 0x3e /* 8 bit Test Register 1 Read Descriptor SM */
#define Q_T1_SV 0x3f /* 8 bit Test Register 1 Supervisor SM */
#define Q_T2 0x40 /* 32 bit Test Register 2 */
#define Q_T3 0x44 /* 32 bit Test Register 3 */
/* 0x48 - 0x7f: reserved */
/*
* Bank 16 - 23
*/
/* RAM Buffer Registers */
#define B16_RAM_REGS 0x0800
/* RAM Buffer Register Offsets, use RB_ADDR() to access */
#define RB_START 0x00 /* 32 bit RAM Buffer Start Address */
#define RB_END 0x04 /* 32 bit RAM Buffer End Address */
#define RB_WP 0x08 /* 32 bit RAM Buffer Write Pointer */
#define RB_RP 0x0c /* 32 bit RAM Buffer Read Pointer */
#define RB_RX_UTPP 0x10 /* 32 bit Rx Upper Threshold, Pause Pack */
#define RB_RX_LTPP 0x14 /* 32 bit Rx Lower Threshold, Pause Pack */
#define RB_RX_UTHP 0x18 /* 32 bit Rx Upper Threshold, High Prio */
#define RB_RX_LTHP 0x1c /* 32 bit Rx Lower Threshold, High Prio */
/* 0x10 - 0x1f: reserved at Tx RAM Buffer Registers */
#define RB_PC 0x20 /* 32 bit RAM Buffer Packet Counter */
#define RB_LEV 0x24 /* 32 bit RAM Buffer Level Register */
#define RB_CTRL 0x28 /* 8 bit RAM Buffer Control Register */
#define RB_TST1 0x29 /* 8 bit RAM Buffer Test Register 1 */
#define RB_TST2 0x2A /* 8 bit RAM Buffer Test Register 2 */
/* 0x2c - 0x7f: reserved */
/*
* Bank 24
*/
/*
* Receive MAC FIFO, Receive LED, and Link_Sync regs (GENESIS only)
* use MR_ADDR() to access
*/
#define RX_MFF_EA 0x0c00 /* 32 bit Receive MAC FIFO End Address */
#define RX_MFF_WP 0x0c04 /* 32 bit Receive MAC FIFO Write Pointer */
/* 0x0c08 - 0x0c0b: reserved */
#define RX_MFF_RP 0x0c0c /* 32 bit Receive MAC FIFO Read Pointer */
#define RX_MFF_PC 0x0c10 /* 32 bit Receive MAC FIFO Packet Cnt */
#define RX_MFF_LEV 0x0c14 /* 32 bit Receive MAC FIFO Level */
#define RX_MFF_CTRL1 0x0c18 /* 16 bit Receive MAC FIFO Control Reg 1*/
#define RX_MFF_STAT_TO 0x0c1a /* 8 bit Receive MAC Status Timeout */
#define RX_MFF_TIST_TO 0x0c1b /* 8 bit Receive MAC Time Stamp Timeout */
#define RX_MFF_CTRL2 0x0c1c /* 8 bit Receive MAC FIFO Control Reg 2*/
#define RX_MFF_TST1 0x0c1d /* 8 bit Receive MAC FIFO Test Reg 1 */
#define RX_MFF_TST2 0x0c1e /* 8 bit Receive MAC FIFO Test Reg 2 */
/* 0x0c1f: reserved */
#define RX_LED_INI 0x0c20 /* 32 bit Receive LED Cnt Init Value */
#define RX_LED_VAL 0x0c24 /* 32 bit Receive LED Cnt Current Value */
#define RX_LED_CTRL 0x0c28 /* 8 bit Receive LED Cnt Control Reg */
#define RX_LED_TST 0x0c29 /* 8 bit Receive LED Cnt Test Register */
/* 0x0c2a - 0x0c2f: reserved */
#define LNK_SYNC_INI 0x0c30 /* 32 bit Link Sync Cnt Init Value */
#define LNK_SYNC_VAL 0x0c34 /* 32 bit Link Sync Cnt Current Value */
#define LNK_SYNC_CTRL 0x0c38 /* 8 bit Link Sync Cnt Control Register */
#define LNK_SYNC_TST 0x0c39 /* 8 bit Link Sync Cnt Test Register */
/* 0x0c3a - 0x0c3b: reserved */
#define LNK_LED_REG 0x0c3c /* 8 bit Link LED Register */
/* 0x0c3d - 0x0c3f: reserved */
/* Receive GMAC FIFO (YUKON only), use MR_ADDR() to access */
#define RX_GMF_EA 0x0c40 /* 32 bit Rx GMAC FIFO End Address */
#define RX_GMF_AF_THR 0x0c44 /* 32 bit Rx GMAC FIFO Almost Full Thresh. */
#define RX_GMF_CTRL_T 0x0c48 /* 32 bit Rx GMAC FIFO Control/Test */
#define RX_GMF_FL_MSK 0x0c4c /* 32 bit Rx GMAC FIFO Flush Mask */
#define RX_GMF_FL_THR 0x0c50 /* 32 bit Rx GMAC FIFO Flush Threshold */
/* 0x0c54 - 0x0c5f: reserved */
#define RX_GMF_WP 0x0c60 /* 32 bit Rx GMAC FIFO Write Pointer */
/* 0x0c64 - 0x0c67: reserved */
#define RX_GMF_WLEV 0x0c68 /* 32 bit Rx GMAC FIFO Write Level */
/* 0x0c6c - 0x0c6f: reserved */
#define RX_GMF_RP 0x0c70 /* 32 bit Rx GMAC FIFO Read Pointer */
/* 0x0c74 - 0x0c77: reserved */
#define RX_GMF_RLEV 0x0c78 /* 32 bit Rx GMAC FIFO Read Level */
/* 0x0c7c - 0x0c7f: reserved */
/*
* Bank 25
*/
/* 0x0c80 - 0x0cbf: MAC 2 */
/* 0x0cc0 - 0x0cff: reserved */
/*
* Bank 26
*/
/*
* Transmit MAC FIFO and Transmit LED Registers (GENESIS only),
* use MR_ADDR() to access
*/
#define TX_MFF_EA 0x0d00 /* 32 bit Transmit MAC FIFO End Address */
#define TX_MFF_WP 0x0d04 /* 32 bit Transmit MAC FIFO WR Pointer */
#define TX_MFF_WSP 0x0d08 /* 32 bit Transmit MAC FIFO WR Shadow Ptr */
#define TX_MFF_RP 0x0d0c /* 32 bit Transmit MAC FIFO RD Pointer */
#define TX_MFF_PC 0x0d10 /* 32 bit Transmit MAC FIFO Packet Cnt */
#define TX_MFF_LEV 0x0d14 /* 32 bit Transmit MAC FIFO Level */
#define TX_MFF_CTRL1 0x0d18 /* 16 bit Transmit MAC FIFO Ctrl Reg 1 */
#define TX_MFF_WAF 0x0d1a /* 8 bit Transmit MAC Wait after flush */
/* 0x0c1b: reserved */
#define TX_MFF_CTRL2 0x0d1c /* 8 bit Transmit MAC FIFO Ctrl Reg 2 */
#define TX_MFF_TST1 0x0d1d /* 8 bit Transmit MAC FIFO Test Reg 1 */
#define TX_MFF_TST2 0x0d1e /* 8 bit Transmit MAC FIFO Test Reg 2 */
/* 0x0d1f: reserved */
#define TX_LED_INI 0x0d20 /* 32 bit Transmit LED Cnt Init Value */
#define TX_LED_VAL 0x0d24 /* 32 bit Transmit LED Cnt Current Val */
#define TX_LED_CTRL 0x0d28 /* 8 bit Transmit LED Cnt Control Reg */
#define TX_LED_TST 0x0d29 /* 8 bit Transmit LED Cnt Test Reg */
/* 0x0d2a - 0x0d3f: reserved */
/* Transmit GMAC FIFO (YUKON only), use MR_ADDR() to access */
#define TX_GMF_EA 0x0d40 /* 32 bit Tx GMAC FIFO End Address */
#define TX_GMF_AE_THR 0x0d44 /* 32 bit Tx GMAC FIFO Almost Empty Thresh.*/
#define TX_GMF_CTRL_T 0x0d48 /* 32 bit Tx GMAC FIFO Control/Test */
/* 0x0d4c - 0x0d5f: reserved */
#define TX_GMF_WP 0x0d60 /* 32 bit Tx GMAC FIFO Write Pointer */
#define TX_GMF_WSP 0x0d64 /* 32 bit Tx GMAC FIFO Write Shadow Ptr. */
#define TX_GMF_WLEV 0x0d68 /* 32 bit Tx GMAC FIFO Write Level */
/* 0x0d6c - 0x0d6f: reserved */
#define TX_GMF_RP 0x0d70 /* 32 bit Tx GMAC FIFO Read Pointer */
#define TX_GMF_RSTP 0x0d74 /* 32 bit Tx GMAC FIFO Restart Pointer */
#define TX_GMF_RLEV 0x0d78 /* 32 bit Tx GMAC FIFO Read Level */
/* 0x0d7c - 0x0d7f: reserved */
/*
* Bank 27
*/
/* 0x0d80 - 0x0dbf: MAC 2 */
/* 0x0daa - 0x0dff: reserved */
/*
* Bank 28
*/
/* Descriptor Poll Timer Registers */
#define B28_DPT_INI 0x0e00 /* 24 bit Descriptor Poll Timer Init Val */
#define B28_DPT_VAL 0x0e04 /* 24 bit Descriptor Poll Timer Curr Val */
#define B28_DPT_CTRL 0x0e08 /* 8 bit Descriptor Poll Timer Ctrl Reg */
/* 0x0e09: reserved */
#define B28_DPT_TST 0x0e0a /* 8 bit Descriptor Poll Timer Test Reg */
/* 0x0e0b: reserved */
/* Time Stamp Timer Registers (YUKON only) */
/* 0x0e10: reserved */
#define GMAC_TI_ST_VAL 0x0e14 /* 32 bit Time Stamp Timer Curr Val */
#define GMAC_TI_ST_CTRL 0x0e18 /* 8 bit Time Stamp Timer Ctrl Reg */
/* 0x0e19: reserved */
#define GMAC_TI_ST_TST 0x0e1a /* 8 bit Time Stamp Timer Test Reg */
/* 0x0e1b - 0x0e7f: reserved */
/*
* Bank 29
*/
/* 0x0e80 - 0x0efc: reserved */
/*
* Bank 30
*/
/* GMAC and GPHY Control Registers (YUKON only) */
#define GMAC_CTRL 0x0f00 /* 32 bit GMAC Control Reg */
#define GPHY_CTRL 0x0f04 /* 32 bit GPHY Control Reg */
#define GMAC_IRQ_SRC 0x0f08 /* 8 bit GMAC Interrupt Source Reg */
/* 0x0f09 - 0x0f0b: reserved */
#define GMAC_IRQ_MSK 0x0f0c /* 8 bit GMAC Interrupt Mask Reg */
/* 0x0f0d - 0x0f0f: reserved */
#define GMAC_LINK_CTRL 0x0f10 /* 16 bit Link Control Reg */
/* 0x0f14 - 0x0f1f: reserved */
/* Wake-up Frame Pattern Match Control Registers (YUKON only) */
#define WOL_REG_OFFS 0x20 /* HW-Bug: Address is + 0x20 against spec. */
#define WOL_CTRL_STAT 0x0f20 /* 16 bit WOL Control/Status Reg */
#define WOL_MATCH_CTL 0x0f22 /* 8 bit WOL Match Control Reg */
#define WOL_MATCH_RES 0x0f23 /* 8 bit WOL Match Result Reg */
#define WOL_MAC_ADDR_LO 0x0f24 /* 32 bit WOL MAC Address Low */
#define WOL_MAC_ADDR_HI 0x0f28 /* 16 bit WOL MAC Address High */
#define WOL_PATT_RPTR 0x0f2c /* 8 bit WOL Pattern Read Ptr */
/* use this macro to access above registers */
#define WOL_REG(Reg) ((Reg) + (pAC->GIni.GIWolOffs))
/* WOL Pattern Length Registers (YUKON only) */
#define WOL_PATT_LEN_LO 0x0f30 /* 32 bit WOL Pattern Length 3..0 */
#define WOL_PATT_LEN_HI 0x0f34 /* 24 bit WOL Pattern Length 6..4 */
/* WOL Pattern Counter Registers (YUKON only) */
#define WOL_PATT_CNT_0 0x0f38 /* 32 bit WOL Pattern Counter 3..0 */
#define WOL_PATT_CNT_4 0x0f3c /* 24 bit WOL Pattern Counter 6..4 */
/* 0x0f40 - 0x0f7f: reserved */
/*
* Bank 31
*/
/* 0x0f80 - 0x0fff: reserved */
/*
* Bank 32 - 33
*/
#define WOL_PATT_RAM_1 0x1000 /* WOL Pattern RAM Link 1 */
/*
* Bank 0x22 - 0x3f
*/
/* 0x1100 - 0x1fff: reserved */
/*
* Bank 0x40 - 0x4f
*/
#define BASE_XMAC_1 0x2000 /* XMAC 1 registers */
/*
* Bank 0x50 - 0x5f
*/
#define BASE_GMAC_1 0x2800 /* GMAC 1 registers */
/*
* Bank 0x60 - 0x6f
*/
#define BASE_XMAC_2 0x3000 /* XMAC 2 registers */
/*
* Bank 0x70 - 0x7f
*/
#define BASE_GMAC_2 0x3800 /* GMAC 2 registers */
/*
* Control Register Bit Definitions:
*/
/* B0_RAP 8 bit Register Address Port */
/* Bit 7: reserved */
#define RAP_RAP 0x3f /* Bit 6..0: 0 = block 0,..,6f = block 6f */
/* B0_CTST 16 bit Control/Status register */
/* Bit 15..14: reserved */
#define CS_CLK_RUN_HOT BIT_13S /* CLK_RUN hot m. (YUKON-Lite only) */
#define CS_CLK_RUN_RST BIT_12S /* CLK_RUN reset (YUKON-Lite only) */
#define CS_CLK_RUN_ENA BIT_11S /* CLK_RUN enable (YUKON-Lite only) */
#define CS_VAUX_AVAIL BIT_10S /* VAUX available (YUKON only) */
#define CS_BUS_CLOCK BIT_9S /* Bus Clock 0/1 = 33/66 MHz */
#define CS_BUS_SLOT_SZ BIT_8S /* Slot Size 0/1 = 32/64 bit slot */
#define CS_ST_SW_IRQ BIT_7S /* Set IRQ SW Request */
#define CS_CL_SW_IRQ BIT_6S /* Clear IRQ SW Request */
#define CS_STOP_DONE BIT_5S /* Stop Master is finished */
#define CS_STOP_MAST BIT_4S /* Command Bit to stop the master */
#define CS_MRST_CLR BIT_3S /* Clear Master reset */
#define CS_MRST_SET BIT_2S /* Set Master reset */
#define CS_RST_CLR BIT_1S /* Clear Software reset */
#define CS_RST_SET BIT_0S /* Set Software reset */
/* B0_LED 8 Bit LED register */
/* Bit 7.. 2: reserved */
#define LED_STAT_ON BIT_1S /* Status LED on */
#define LED_STAT_OFF BIT_0S /* Status LED off */
/* B0_POWER_CTRL 8 Bit Power Control reg (YUKON only) */
#define PC_VAUX_ENA BIT_7 /* Switch VAUX Enable */
#define PC_VAUX_DIS BIT_6 /* Switch VAUX Disable */
#define PC_VCC_ENA BIT_5 /* Switch VCC Enable */
#define PC_VCC_DIS BIT_4 /* Switch VCC Disable */
#define PC_VAUX_ON BIT_3 /* Switch VAUX On */
#define PC_VAUX_OFF BIT_2 /* Switch VAUX Off */
#define PC_VCC_ON BIT_1 /* Switch VCC On */
#define PC_VCC_OFF BIT_0 /* Switch VCC Off */
/* B0_ISRC 32 bit Interrupt Source Register */
/* B0_IMSK 32 bit Interrupt Mask Register */
/* B0_SP_ISRC 32 bit Special Interrupt Source Reg */
/* B2_IRQM_MSK 32 bit IRQ Moderation Mask */
#define IS_ALL_MSK 0xbfffffffUL /* All Interrupt bits */
#define IS_HW_ERR BIT_31 /* Interrupt HW Error */
/* Bit 30: reserved */
#define IS_PA_TO_RX1 BIT_29 /* Packet Arb Timeout Rx1 */
#define IS_PA_TO_RX2 BIT_28 /* Packet Arb Timeout Rx2 */
#define IS_PA_TO_TX1 BIT_27 /* Packet Arb Timeout Tx1 */
#define IS_PA_TO_TX2 BIT_26 /* Packet Arb Timeout Tx2 */
#define IS_I2C_READY BIT_25 /* IRQ on end of I2C Tx */
#define IS_IRQ_SW BIT_24 /* SW forced IRQ */
#define IS_EXT_REG BIT_23 /* IRQ from LM80 or PHY (GENESIS only) */
/* IRQ from PHY (YUKON only) */
#define IS_TIMINT BIT_22 /* IRQ from Timer */
#define IS_MAC1 BIT_21 /* IRQ from MAC 1 */
#define IS_LNK_SYNC_M1 BIT_20 /* Link Sync Cnt wrap MAC 1 */
#define IS_MAC2 BIT_19 /* IRQ from MAC 2 */
#define IS_LNK_SYNC_M2 BIT_18 /* Link Sync Cnt wrap MAC 2 */
/* Receive Queue 1 */
#define IS_R1_B BIT_17 /* Q_R1 End of Buffer */
#define IS_R1_F BIT_16 /* Q_R1 End of Frame */
#define IS_R1_C BIT_15 /* Q_R1 Encoding Error */
/* Receive Queue 2 */
#define IS_R2_B BIT_14 /* Q_R2 End of Buffer */
#define IS_R2_F BIT_13 /* Q_R2 End of Frame */
#define IS_R2_C BIT_12 /* Q_R2 Encoding Error */
/* Synchronous Transmit Queue 1 */
#define IS_XS1_B BIT_11 /* Q_XS1 End of Buffer */
#define IS_XS1_F BIT_10 /* Q_XS1 End of Frame */
#define IS_XS1_C BIT_9 /* Q_XS1 Encoding Error */
/* Asynchronous Transmit Queue 1 */
#define IS_XA1_B BIT_8 /* Q_XA1 End of Buffer */
#define IS_XA1_F BIT_7 /* Q_XA1 End of Frame */
#define IS_XA1_C BIT_6 /* Q_XA1 Encoding Error */
/* Synchronous Transmit Queue 2 */
#define IS_XS2_B BIT_5 /* Q_XS2 End of Buffer */
#define IS_XS2_F BIT_4 /* Q_XS2 End of Frame */
#define IS_XS2_C BIT_3 /* Q_XS2 Encoding Error */
/* Asynchronous Transmit Queue 2 */
#define IS_XA2_B BIT_2 /* Q_XA2 End of Buffer */
#define IS_XA2_F BIT_1 /* Q_XA2 End of Frame */
#define IS_XA2_C BIT_0 /* Q_XA2 Encoding Error */
/* B0_HWE_ISRC 32 bit HW Error Interrupt Src Reg */
/* B0_HWE_IMSK 32 bit HW Error Interrupt Mask Reg */
/* B2_IRQM_HWE_MSK 32 bit IRQ Moderation HW Error Mask */
#define IS_ERR_MSK 0x00000fffL /* All Error bits */
/* Bit 31..14: reserved */
#define IS_IRQ_TIST_OV BIT_13 /* Time Stamp Timer Overflow (YUKON only) */
#define IS_IRQ_SENSOR BIT_12 /* IRQ from Sensor (YUKON only) */
#define IS_IRQ_MST_ERR BIT_11 /* IRQ master error detected */
#define IS_IRQ_STAT BIT_10 /* IRQ status exception */
#define IS_NO_STAT_M1 BIT_9 /* No Rx Status from MAC 1 */
#define IS_NO_STAT_M2 BIT_8 /* No Rx Status from MAC 2 */
#define IS_NO_TIST_M1 BIT_7 /* No Time Stamp from MAC 1 */
#define IS_NO_TIST_M2 BIT_6 /* No Time Stamp from MAC 2 */
#define IS_RAM_RD_PAR BIT_5 /* RAM Read Parity Error */
#define IS_RAM_WR_PAR BIT_4 /* RAM Write Parity Error */
#define IS_M1_PAR_ERR BIT_3 /* MAC 1 Parity Error */
#define IS_M2_PAR_ERR BIT_2 /* MAC 2 Parity Error */
#define IS_R1_PAR_ERR BIT_1 /* Queue R1 Parity Error */
#define IS_R2_PAR_ERR BIT_0 /* Queue R2 Parity Error */
/* B2_CONN_TYP 8 bit Connector type */
/* B2_PMD_TYP 8 bit PMD type */
/* Values of connector and PMD type comply to SysKonnect internal std */
/* B2_MAC_CFG 8 bit MAC Configuration / Chip Revision */
#define CFG_CHIP_R_MSK (0xf<<4) /* Bit 7.. 4: Chip Revision */
/* Bit 3.. 2: reserved */
#define CFG_DIS_M2_CLK BIT_1S /* Disable Clock for 2nd MAC */
#define CFG_SNG_MAC BIT_0S /* MAC Config: 0=2 MACs / 1=1 MAC*/
/* B2_CHIP_ID 8 bit Chip Identification Number */
#define CHIP_ID_GENESIS 0x0a /* Chip ID for GENESIS */
#define CHIP_ID_YUKON 0xb0 /* Chip ID for YUKON */
#define CHIP_ID_YUKON_LITE 0xb1 /* Chip ID for YUKON-Lite (Rev. A1-A3) */
#define CHIP_ID_YUKON_LP 0xb2 /* Chip ID for YUKON-LP */
#define CHIP_REV_YU_LITE_A1 3 /* Chip Rev. for YUKON-Lite A1,A2 */
#define CHIP_REV_YU_LITE_A3 7 /* Chip Rev. for YUKON-Lite A3 */
/* B2_FAR 32 bit Flash-Prom Addr Reg/Cnt */
#define FAR_ADDR 0x1ffffL /* Bit 16.. 0: FPROM Address mask */
/* B2_LD_CTRL 8 bit EPROM loader control register */
/* Bits are currently reserved */
/* B2_LD_TEST 8 bit EPROM loader test register */
/* Bit 7.. 4: reserved */
#define LD_T_ON BIT_3S /* Loader Test mode on */
#define LD_T_OFF BIT_2S /* Loader Test mode off */
#define LD_T_STEP BIT_1S /* Decrement FPROM addr. Counter */
#define LD_START BIT_0S /* Start loading FPROM */
/*
* Timer Section
*/
/* B2_TI_CTRL 8 bit Timer control */
/* B2_IRQM_CTRL 8 bit IRQ Moderation Timer Control */
/* Bit 7.. 3: reserved */
#define TIM_START BIT_2S /* Start Timer */
#define TIM_STOP BIT_1S /* Stop Timer */
#define TIM_CLR_IRQ BIT_0S /* Clear Timer IRQ (!IRQM) */
/* B2_TI_TEST 8 Bit Timer Test */
/* B2_IRQM_TEST 8 bit IRQ Moderation Timer Test */
/* B28_DPT_TST 8 bit Descriptor Poll Timer Test Reg */
/* Bit 7.. 3: reserved */
#define TIM_T_ON BIT_2S /* Test mode on */
#define TIM_T_OFF BIT_1S /* Test mode off */
#define TIM_T_STEP BIT_0S /* Test step */
/* B28_DPT_INI 32 bit Descriptor Poll Timer Init Val */
/* B28_DPT_VAL 32 bit Descriptor Poll Timer Curr Val */
/* Bit 31..24: reserved */
#define DPT_MSK 0x00ffffffL /* Bit 23.. 0: Desc Poll Timer Bits */
/* B28_DPT_CTRL 8 bit Descriptor Poll Timer Ctrl Reg */
/* Bit 7.. 2: reserved */
#define DPT_START BIT_1S /* Start Descriptor Poll Timer */
#define DPT_STOP BIT_0S /* Stop Descriptor Poll Timer */
/* B2_E_3 8 bit lower 4 bits used for HW self test result */
#define B2_E3_RES_MASK 0x0f
/* B2_TST_CTRL1 8 bit Test Control Register 1 */
#define TST_FRC_DPERR_MR BIT_7S /* force DATAPERR on MST RD */
#define TST_FRC_DPERR_MW BIT_6S /* force DATAPERR on MST WR */
#define TST_FRC_DPERR_TR BIT_5S /* force DATAPERR on TRG RD */
#define TST_FRC_DPERR_TW BIT_4S /* force DATAPERR on TRG WR */
#define TST_FRC_APERR_M BIT_3S /* force ADDRPERR on MST */
#define TST_FRC_APERR_T BIT_2S /* force ADDRPERR on TRG */
#define TST_CFG_WRITE_ON BIT_1S /* Enable Config Reg WR */
#define TST_CFG_WRITE_OFF BIT_0S /* Disable Config Reg WR */
/* B2_TST_CTRL2 8 bit Test Control Register 2 */
/* Bit 7.. 4: reserved */
/* force the following error on the next master read/write */
#define TST_FRC_DPERR_MR64 BIT_3S /* DataPERR RD 64 */
#define TST_FRC_DPERR_MW64 BIT_2S /* DataPERR WR 64 */
#define TST_FRC_APERR_1M64 BIT_1S /* AddrPERR on 1. phase */
#define TST_FRC_APERR_2M64 BIT_0S /* AddrPERR on 2. phase */
/* B2_GP_IO 32 bit General Purpose I/O Register */
/* Bit 31..26: reserved */
#define GP_DIR_9 BIT_25 /* IO_9 direct, 0=In/1=Out */
#define GP_DIR_8 BIT_24 /* IO_8 direct, 0=In/1=Out */
#define GP_DIR_7 BIT_23 /* IO_7 direct, 0=In/1=Out */
#define GP_DIR_6 BIT_22 /* IO_6 direct, 0=In/1=Out */
#define GP_DIR_5 BIT_21 /* IO_5 direct, 0=In/1=Out */
#define GP_DIR_4 BIT_20 /* IO_4 direct, 0=In/1=Out */
#define GP_DIR_3 BIT_19 /* IO_3 direct, 0=In/1=Out */
#define GP_DIR_2 BIT_18 /* IO_2 direct, 0=In/1=Out */
#define GP_DIR_1 BIT_17 /* IO_1 direct, 0=In/1=Out */
#define GP_DIR_0 BIT_16 /* IO_0 direct, 0=In/1=Out */
/* Bit 15..10: reserved */
#define GP_IO_9 BIT_9 /* IO_9 pin */
#define GP_IO_8 BIT_8 /* IO_8 pin */
#define GP_IO_7 BIT_7 /* IO_7 pin */
#define GP_IO_6 BIT_6 /* IO_6 pin */
#define GP_IO_5 BIT_5 /* IO_5 pin */
#define GP_IO_4 BIT_4 /* IO_4 pin */
#define GP_IO_3 BIT_3 /* IO_3 pin */
#define GP_IO_2 BIT_2 /* IO_2 pin */
#define GP_IO_1 BIT_1 /* IO_1 pin */
#define GP_IO_0 BIT_0 /* IO_0 pin */
/* B2_I2C_CTRL 32 bit I2C HW Control Register */
#define I2C_FLAG BIT_31 /* Start read/write if WR */
#define I2C_ADDR (0x7fffL<<16) /* Bit 30..16: Addr to be RD/WR */
#define I2C_DEV_SEL (0x7fL<<9) /* Bit 15.. 9: I2C Device Select */
/* Bit 8.. 5: reserved */
#define I2C_BURST_LEN BIT_4 /* Burst Len, 1/4 bytes */
#define I2C_DEV_SIZE (7<<1) /* Bit 3.. 1: I2C Device Size */
#define I2C_025K_DEV (0<<1) /* 0: 256 Bytes or smal. */
#define I2C_05K_DEV (1<<1) /* 1: 512 Bytes */
#define I2C_1K_DEV (2<<1) /* 2: 1024 Bytes */
#define I2C_2K_DEV (3<<1) /* 3: 2048 Bytes */
#define I2C_4K_DEV (4<<1) /* 4: 4096 Bytes */
#define I2C_8K_DEV (5<<1) /* 5: 8192 Bytes */
#define I2C_16K_DEV (6<<1) /* 6: 16384 Bytes */
#define I2C_32K_DEV (7<<1) /* 7: 32768 Bytes */
#define I2C_STOP BIT_0 /* Interrupt I2C transfer */
/* B2_I2C_IRQ 32 bit I2C HW IRQ Register */
/* Bit 31.. 1 reserved */
#define I2C_CLR_IRQ BIT_0 /* Clear I2C IRQ */
/* B2_I2C_SW 32 bit (8 bit access) I2C HW SW Port Register */
/* Bit 7.. 3: reserved */
#define I2C_DATA_DIR BIT_2S /* direction of I2C_DATA */
#define I2C_DATA BIT_1S /* I2C Data Port */
#define I2C_CLK BIT_0S /* I2C Clock Port */
/*
* I2C Address
*/
#define I2C_SENS_ADDR LM80_ADDR /* I2C Sensor Address, (Volt and Temp)*/
/* B2_BSC_CTRL 8 bit Blink Source Counter Control */
/* Bit 7.. 2: reserved */
#define BSC_START BIT_1S /* Start Blink Source Counter */
#define BSC_STOP BIT_0S /* Stop Blink Source Counter */
/* B2_BSC_STAT 8 bit Blink Source Counter Status */
/* Bit 7.. 1: reserved */
#define BSC_SRC BIT_0S /* Blink Source, 0=Off / 1=On */
/* B2_BSC_TST 16 bit Blink Source Counter Test Reg */
#define BSC_T_ON BIT_2S /* Test mode on */
#define BSC_T_OFF BIT_1S /* Test mode off */
#define BSC_T_STEP BIT_0S /* Test step */
/* B3_RAM_ADDR 32 bit RAM Address, to read or write */
/* Bit 31..19: reserved */
#define RAM_ADR_RAN 0x0007ffffL /* Bit 18.. 0: RAM Address Range */
/* RAM Interface Registers */
/* B3_RI_CTRL 16 bit RAM Iface Control Register */
/* Bit 15..10: reserved */
#define RI_CLR_RD_PERR BIT_9S /* Clear IRQ RAM Read Parity Err */
#define RI_CLR_WR_PERR BIT_8S /* Clear IRQ RAM Write Parity Err*/
/* Bit 7.. 2: reserved */
#define RI_RST_CLR BIT_1S /* Clear RAM Interface Reset */
#define RI_RST_SET BIT_0S /* Set RAM Interface Reset */
/* B3_RI_TEST 8 bit RAM Iface Test Register */
/* Bit 15.. 4: reserved */
#define RI_T_EV BIT_3S /* Timeout Event occured */
#define RI_T_ON BIT_2S /* Timeout Timer Test On */
#define RI_T_OFF BIT_1S /* Timeout Timer Test Off */
#define RI_T_STEP BIT_0S /* Timeout Timer Step */
/* MAC Arbiter Registers */
/* B3_MA_TO_CTRL 16 bit MAC Arbiter Timeout Ctrl Reg */
/* Bit 15.. 4: reserved */
#define MA_FOE_ON BIT_3S /* XMAC Fast Output Enable ON */
#define MA_FOE_OFF BIT_2S /* XMAC Fast Output Enable OFF */
#define MA_RST_CLR BIT_1S /* Clear MAC Arbiter Reset */
#define MA_RST_SET BIT_0S /* Set MAC Arbiter Reset */
/* B3_MA_RC_CTRL 16 bit MAC Arbiter Recovery Ctrl Reg */
/* Bit 15.. 8: reserved */
#define MA_ENA_REC_TX2 BIT_7S /* Enable Recovery Timer TX2 */
#define MA_DIS_REC_TX2 BIT_6S /* Disable Recovery Timer TX2 */
#define MA_ENA_REC_TX1 BIT_5S /* Enable Recovery Timer TX1 */
#define MA_DIS_REC_TX1 BIT_4S /* Disable Recovery Timer TX1 */
#define MA_ENA_REC_RX2 BIT_3S /* Enable Recovery Timer RX2 */
#define MA_DIS_REC_RX2 BIT_2S /* Disable Recovery Timer RX2 */
#define MA_ENA_REC_RX1 BIT_1S /* Enable Recovery Timer RX1 */
#define MA_DIS_REC_RX1 BIT_0S /* Disable Recovery Timer RX1 */
/* Packet Arbiter Registers */
/* B3_PA_CTRL 16 bit Packet Arbiter Ctrl Register */
/* Bit 15..14: reserved */
#define PA_CLR_TO_TX2 BIT_13S /* Clear IRQ Packet Timeout TX2 */
#define PA_CLR_TO_TX1 BIT_12S /* Clear IRQ Packet Timeout TX1 */
#define PA_CLR_TO_RX2 BIT_11S /* Clear IRQ Packet Timeout RX2 */
#define PA_CLR_TO_RX1 BIT_10S /* Clear IRQ Packet Timeout RX1 */
#define PA_ENA_TO_TX2 BIT_9S /* Enable Timeout Timer TX2 */
#define PA_DIS_TO_TX2 BIT_8S /* Disable Timeout Timer TX2 */
#define PA_ENA_TO_TX1 BIT_7S /* Enable Timeout Timer TX1 */
#define PA_DIS_TO_TX1 BIT_6S /* Disable Timeout Timer TX1 */
#define PA_ENA_TO_RX2 BIT_5S /* Enable Timeout Timer RX2 */
#define PA_DIS_TO_RX2 BIT_4S /* Disable Timeout Timer RX2 */
#define PA_ENA_TO_RX1 BIT_3S /* Enable Timeout Timer RX1 */
#define PA_DIS_TO_RX1 BIT_2S /* Disable Timeout Timer RX1 */
#define PA_RST_CLR BIT_1S /* Clear MAC Arbiter Reset */
#define PA_RST_SET BIT_0S /* Set MAC Arbiter Reset */
#define PA_ENA_TO_ALL (PA_ENA_TO_RX1 | PA_ENA_TO_RX2 |\
PA_ENA_TO_TX1 | PA_ENA_TO_TX2)
/* Rx/Tx Path related Arbiter Test Registers */
/* B3_MA_TO_TEST 16 bit MAC Arbiter Timeout Test Reg */
/* B3_MA_RC_TEST 16 bit MAC Arbiter Recovery Test Reg */
/* B3_PA_TEST 16 bit Packet Arbiter Test Register */
/* Bit 15, 11, 7, and 3 are reserved in B3_PA_TEST */
#define TX2_T_EV BIT_15S /* TX2 Timeout/Recv Event occured */
#define TX2_T_ON BIT_14S /* TX2 Timeout/Recv Timer Test On */
#define TX2_T_OFF BIT_13S /* TX2 Timeout/Recv Timer Tst Off */
#define TX2_T_STEP BIT_12S /* TX2 Timeout/Recv Timer Step */
#define TX1_T_EV BIT_11S /* TX1 Timeout/Recv Event occured */
#define TX1_T_ON BIT_10S /* TX1 Timeout/Recv Timer Test On */
#define TX1_T_OFF BIT_9S /* TX1 Timeout/Recv Timer Tst Off */
#define TX1_T_STEP BIT_8S /* TX1 Timeout/Recv Timer Step */
#define RX2_T_EV BIT_7S /* RX2 Timeout/Recv Event occured */
#define RX2_T_ON BIT_6S /* RX2 Timeout/Recv Timer Test On */
#define RX2_T_OFF BIT_5S /* RX2 Timeout/Recv Timer Tst Off */
#define RX2_T_STEP BIT_4S /* RX2 Timeout/Recv Timer Step */
#define RX1_T_EV BIT_3S /* RX1 Timeout/Recv Event occured */
#define RX1_T_ON BIT_2S /* RX1 Timeout/Recv Timer Test On */
#define RX1_T_OFF BIT_1S /* RX1 Timeout/Recv Timer Tst Off */
#define RX1_T_STEP BIT_0S /* RX1 Timeout/Recv Timer Step */
/* Transmit Arbiter Registers MAC 1 and 2, use MR_ADDR() to access */
/* TXA_ITI_INI 32 bit Tx Arb Interval Timer Init Val */
/* TXA_ITI_VAL 32 bit Tx Arb Interval Timer Value */
/* TXA_LIM_INI 32 bit Tx Arb Limit Counter Init Val */
/* TXA_LIM_VAL 32 bit Tx Arb Limit Counter Value */
/* Bit 31..24: reserved */
#define TXA_MAX_VAL 0x00ffffffUL/* Bit 23.. 0: Max TXA Timer/Cnt Val */
/* TXA_CTRL 8 bit Tx Arbiter Control Register */
#define TXA_ENA_FSYNC BIT_7S /* Enable force of sync Tx queue */
#define TXA_DIS_FSYNC BIT_6S /* Disable force of sync Tx queue */
#define TXA_ENA_ALLOC BIT_5S /* Enable alloc of free bandwidth */
#define TXA_DIS_ALLOC BIT_4S /* Disable alloc of free bandwidth */
#define TXA_START_RC BIT_3S /* Start sync Rate Control */
#define TXA_STOP_RC BIT_2S /* Stop sync Rate Control */
#define TXA_ENA_ARB BIT_1S /* Enable Tx Arbiter */
#define TXA_DIS_ARB BIT_0S /* Disable Tx Arbiter */
/* TXA_TEST 8 bit Tx Arbiter Test Register */
/* Bit 7.. 6: reserved */
#define TXA_INT_T_ON BIT_5S /* Tx Arb Interval Timer Test On */
#define TXA_INT_T_OFF BIT_4S /* Tx Arb Interval Timer Test Off */
#define TXA_INT_T_STEP BIT_3S /* Tx Arb Interval Timer Step */
#define TXA_LIM_T_ON BIT_2S /* Tx Arb Limit Timer Test On */
#define TXA_LIM_T_OFF BIT_1S /* Tx Arb Limit Timer Test Off */
#define TXA_LIM_T_STEP BIT_0S /* Tx Arb Limit Timer Step */
/* TXA_STAT 8 bit Tx Arbiter Status Register */
/* Bit 7.. 1: reserved */
#define TXA_PRIO_XS BIT_0S /* sync queue has prio to send */
/* Q_BC 32 bit Current Byte Counter */
/* Bit 31..16: reserved */
#define BC_MAX 0xffff /* Bit 15.. 0: Byte counter */
/* BMU Control Status Registers */
/* B0_R1_CSR 32 bit BMU Ctrl/Stat Rx Queue 1 */
/* B0_R2_CSR 32 bit BMU Ctrl/Stat Rx Queue 2 */
/* B0_XA1_CSR 32 bit BMU Ctrl/Stat Sync Tx Queue 1 */
/* B0_XS1_CSR 32 bit BMU Ctrl/Stat Async Tx Queue 1 */
/* B0_XA2_CSR 32 bit BMU Ctrl/Stat Sync Tx Queue 2 */
/* B0_XS2_CSR 32 bit BMU Ctrl/Stat Async Tx Queue 2 */
/* Q_CSR 32 bit BMU Control/Status Register */
/* Bit 31..25: reserved */
#define CSR_SV_IDLE BIT_24 /* BMU SM Idle */
/* Bit 23..22: reserved */
#define CSR_DESC_CLR BIT_21 /* Clear Reset for Descr */
#define CSR_DESC_SET BIT_20 /* Set Reset for Descr */
#define CSR_FIFO_CLR BIT_19 /* Clear Reset for FIFO */
#define CSR_FIFO_SET BIT_18 /* Set Reset for FIFO */
#define CSR_HPI_RUN BIT_17 /* Release HPI SM */
#define CSR_HPI_RST BIT_16 /* Reset HPI SM to Idle */
#define CSR_SV_RUN BIT_15 /* Release Supervisor SM */
#define CSR_SV_RST BIT_14 /* Reset Supervisor SM */
#define CSR_DREAD_RUN BIT_13 /* Release Descr Read SM */
#define CSR_DREAD_RST BIT_12 /* Reset Descr Read SM */
#define CSR_DWRITE_RUN BIT_11 /* Release Descr Write SM */
#define CSR_DWRITE_RST BIT_10 /* Reset Descr Write SM */
#define CSR_TRANS_RUN BIT_9 /* Release Transfer SM */
#define CSR_TRANS_RST BIT_8 /* Reset Transfer SM */
#define CSR_ENA_POL BIT_7 /* Enable Descr Polling */
#define CSR_DIS_POL BIT_6 /* Disable Descr Polling */
#define CSR_STOP BIT_5 /* Stop Rx/Tx Queue */
#define CSR_START BIT_4 /* Start Rx/Tx Queue */
#define CSR_IRQ_CL_P BIT_3 /* (Rx) Clear Parity IRQ */
#define CSR_IRQ_CL_B BIT_2 /* Clear EOB IRQ */
#define CSR_IRQ_CL_F BIT_1 /* Clear EOF IRQ */
#define CSR_IRQ_CL_C BIT_0 /* Clear ERR IRQ */
#define CSR_SET_RESET (CSR_DESC_SET | CSR_FIFO_SET | CSR_HPI_RST |\
CSR_SV_RST | CSR_DREAD_RST | CSR_DWRITE_RST |\
CSR_TRANS_RST)
#define CSR_CLR_RESET (CSR_DESC_CLR | CSR_FIFO_CLR | CSR_HPI_RUN |\
CSR_SV_RUN | CSR_DREAD_RUN | CSR_DWRITE_RUN |\
CSR_TRANS_RUN)
/* Q_F 32 bit Flag Register */
/* Bit 31..28: reserved */
#define F_ALM_FULL BIT_27 /* Rx FIFO: almost full */
#define F_EMPTY BIT_27 /* Tx FIFO: empty flag */
#define F_FIFO_EOF BIT_26 /* Tag (EOF Flag) bit in FIFO */
#define F_WM_REACHED BIT_25 /* Watermark reached */
/* reserved */
#define F_FIFO_LEVEL (0x1fL<<16) /* Bit 23..16: # of Qwords in FIFO */
/* Bit 15..11: reserved */
#define F_WATER_MARK 0x0007ffL /* Bit 10.. 0: Watermark */
/* Q_T1 32 bit Test Register 1 */
/* Holds four State Machine control Bytes */
#define SM_CTRL_SV_MSK (0xffL<<24) /* Bit 31..24: Control Supervisor SM */
#define SM_CTRL_RD_MSK (0xffL<<16) /* Bit 23..16: Control Read Desc SM */
#define SM_CTRL_WR_MSK (0xffL<<8) /* Bit 15.. 8: Control Write Desc SM */
#define SM_CTRL_TR_MSK 0xffL /* Bit 7.. 0: Control Transfer SM */
/* Q_T1_TR 8 bit Test Register 1 Transfer SM */
/* Q_T1_WR 8 bit Test Register 1 Write Descriptor SM */
/* Q_T1_RD 8 bit Test Register 1 Read Descriptor SM */
/* Q_T1_SV 8 bit Test Register 1 Supervisor SM */
/* The control status byte of each machine looks like ... */
#define SM_STATE 0xf0 /* Bit 7.. 4: State which shall be loaded */
#define SM_LOAD BIT_3S /* Load the SM with SM_STATE */
#define SM_TEST_ON BIT_2S /* Switch on SM Test Mode */
#define SM_TEST_OFF BIT_1S /* Go off the Test Mode */
#define SM_STEP BIT_0S /* Step the State Machine */
/* The encoding of the states is not supported by the Diagnostics Tool */
/* Q_T2 32 bit Test Register 2 */
/* Bit 31.. 8: reserved */
#define T2_AC_T_ON BIT_7 /* Address Counter Test Mode on */
#define T2_AC_T_OFF BIT_6 /* Address Counter Test Mode off */
#define T2_BC_T_ON BIT_5 /* Byte Counter Test Mode on */
#define T2_BC_T_OFF BIT_4 /* Byte Counter Test Mode off */
#define T2_STEP04 BIT_3 /* Inc AC/Dec BC by 4 */
#define T2_STEP03 BIT_2 /* Inc AC/Dec BC by 3 */
#define T2_STEP02 BIT_1 /* Inc AC/Dec BC by 2 */
#define T2_STEP01 BIT_0 /* Inc AC/Dec BC by 1 */
/* Q_T3 32 bit Test Register 3 */
/* Bit 31.. 7: reserved */
#define T3_MUX_MSK (7<<4) /* Bit 6.. 4: Mux Position */
/* Bit 3: reserved */
#define T3_VRAM_MSK 7 /* Bit 2.. 0: Virtual RAM Buffer Address */
/* RAM Buffer Register Offsets, use RB_ADDR(Queue, Offs) to access */
/* RB_START 32 bit RAM Buffer Start Address */
/* RB_END 32 bit RAM Buffer End Address */
/* RB_WP 32 bit RAM Buffer Write Pointer */
/* RB_RP 32 bit RAM Buffer Read Pointer */
/* RB_RX_UTPP 32 bit Rx Upper Threshold, Pause Pack */
/* RB_RX_LTPP 32 bit Rx Lower Threshold, Pause Pack */
/* RB_RX_UTHP 32 bit Rx Upper Threshold, High Prio */
/* RB_RX_LTHP 32 bit Rx Lower Threshold, High Prio */
/* RB_PC 32 bit RAM Buffer Packet Counter */
/* RB_LEV 32 bit RAM Buffer Level Register */
/* Bit 31..19: reserved */
#define RB_MSK 0x0007ffff /* Bit 18.. 0: RAM Buffer Pointer Bits */
/* RB_TST2 8 bit RAM Buffer Test Register 2 */
/* Bit 7.. 4: reserved */
#define RB_PC_DEC BIT_3S /* Packet Counter Decrem */
#define RB_PC_T_ON BIT_2S /* Packet Counter Test On */
#define RB_PC_T_OFF BIT_1S /* Packet Counter Tst Off */
#define RB_PC_INC BIT_0S /* Packet Counter Increm */
/* RB_TST1 8 bit RAM Buffer Test Register 1 */
/* Bit 7: reserved */
#define RB_WP_T_ON BIT_6S /* Write Pointer Test On */
#define RB_WP_T_OFF BIT_5S /* Write Pointer Test Off */
#define RB_WP_INC BIT_4S /* Write Pointer Increm */
/* Bit 3: reserved */
#define RB_RP_T_ON BIT_2S /* Read Pointer Test On */
#define RB_RP_T_OFF BIT_1S /* Read Pointer Test Off */
#define RB_RP_DEC BIT_0S /* Read Pointer Decrement */
/* RB_CTRL 8 bit RAM Buffer Control Register */
/* Bit 7.. 6: reserved */
#define RB_ENA_STFWD BIT_5S /* Enable Store & Forward */
#define RB_DIS_STFWD BIT_4S /* Disable Store & Forward */
#define RB_ENA_OP_MD BIT_3S /* Enable Operation Mode */
#define RB_DIS_OP_MD BIT_2S /* Disable Operation Mode */
#define RB_RST_CLR BIT_1S /* Clear RAM Buf STM Reset */
#define RB_RST_SET BIT_0S /* Set RAM Buf STM Reset */
/* Receive and Transmit MAC FIFO Registers (GENESIS only) */
/* RX_MFF_EA 32 bit Receive MAC FIFO End Address */
/* RX_MFF_WP 32 bit Receive MAC FIFO Write Pointer */
/* RX_MFF_RP 32 bit Receive MAC FIFO Read Pointer */
/* RX_MFF_PC 32 bit Receive MAC FIFO Packet Counter */
/* RX_MFF_LEV 32 bit Receive MAC FIFO Level */
/* TX_MFF_EA 32 bit Transmit MAC FIFO End Address */
/* TX_MFF_WP 32 bit Transmit MAC FIFO Write Pointer */
/* TX_MFF_WSP 32 bit Transmit MAC FIFO WR Shadow Pointer */
/* TX_MFF_RP 32 bit Transmit MAC FIFO Read Pointer */
/* TX_MFF_PC 32 bit Transmit MAC FIFO Packet Cnt */
/* TX_MFF_LEV 32 bit Transmit MAC FIFO Level */
/* Bit 31.. 6: reserved */
#define MFF_MSK 0x007fL /* Bit 5.. 0: MAC FIFO Address/Ptr Bits */
/* RX_MFF_CTRL1 16 bit Receive MAC FIFO Control Reg 1 */
/* Bit 15..14: reserved */
#define MFF_ENA_RDY_PAT BIT_13S /* Enable Ready Patch */
#define MFF_DIS_RDY_PAT BIT_12S /* Disable Ready Patch */
#define MFF_ENA_TIM_PAT BIT_11S /* Enable Timing Patch */
#define MFF_DIS_TIM_PAT BIT_10S /* Disable Timing Patch */
#define MFF_ENA_ALM_FUL BIT_9S /* Enable AlmostFull Sign */
#define MFF_DIS_ALM_FUL BIT_8S /* Disable AlmostFull Sign */
#define MFF_ENA_PAUSE BIT_7S /* Enable Pause Signaling */
#define MFF_DIS_PAUSE BIT_6S /* Disable Pause Signaling */
#define MFF_ENA_FLUSH BIT_5S /* Enable Frame Flushing */
#define MFF_DIS_FLUSH BIT_4S /* Disable Frame Flushing */
#define MFF_ENA_TIST BIT_3S /* Enable Time Stamp Gener */
#define MFF_DIS_TIST BIT_2S /* Disable Time Stamp Gener */
#define MFF_CLR_INTIST BIT_1S /* Clear IRQ No Time Stamp */
#define MFF_CLR_INSTAT BIT_0S /* Clear IRQ No Status */
#define MFF_RX_CTRL_DEF MFF_ENA_TIM_PAT
/* TX_MFF_CTRL1 16 bit Transmit MAC FIFO Control Reg 1 */
#define MFF_CLR_PERR BIT_15S /* Clear Parity Error IRQ */
/* Bit 14: reserved */
#define MFF_ENA_PKT_REC BIT_13S /* Enable Packet Recovery */
#define MFF_DIS_PKT_REC BIT_12S /* Disable Packet Recovery */
/* MFF_ENA_TIM_PAT (see RX_MFF_CTRL1) Bit 11: Enable Timing Patch */
/* MFF_DIS_TIM_PAT (see RX_MFF_CTRL1) Bit 10: Disable Timing Patch */
/* MFF_ENA_ALM_FUL (see RX_MFF_CTRL1) Bit 9: Enable Almost Full Sign */
/* MFF_DIS_ALM_FUL (see RX_MFF_CTRL1) Bit 8: Disable Almost Full Sign */
#define MFF_ENA_W4E BIT_7S /* Enable Wait for Empty */
#define MFF_DIS_W4E BIT_6S /* Disable Wait for Empty */
/* MFF_ENA_FLUSH (see RX_MFF_CTRL1) Bit 5: Enable Frame Flushing */
/* MFF_DIS_FLUSH (see RX_MFF_CTRL1) Bit 4: Disable Frame Flushing */
#define MFF_ENA_LOOPB BIT_3S /* Enable Loopback */
#define MFF_DIS_LOOPB BIT_2S /* Disable Loopback */
#define MFF_CLR_MAC_RST BIT_1S /* Clear XMAC Reset */
#define MFF_SET_MAC_RST BIT_0S /* Set XMAC Reset */
#define MFF_TX_CTRL_DEF (MFF_ENA_PKT_REC | MFF_ENA_TIM_PAT | MFF_ENA_FLUSH)
/* RX_MFF_TST2 8 bit Receive MAC FIFO Test Register 2 */
/* TX_MFF_TST2 8 bit Transmit MAC FIFO Test Register 2 */
/* Bit 7: reserved */
#define MFF_WSP_T_ON BIT_6S /* Tx: Write Shadow Ptr TestOn */
#define MFF_WSP_T_OFF BIT_5S /* Tx: Write Shadow Ptr TstOff */
#define MFF_WSP_INC BIT_4S /* Tx: Write Shadow Ptr Increment */
#define MFF_PC_DEC BIT_3S /* Packet Counter Decrement */
#define MFF_PC_T_ON BIT_2S /* Packet Counter Test On */
#define MFF_PC_T_OFF BIT_1S /* Packet Counter Test Off */
#define MFF_PC_INC BIT_0S /* Packet Counter Increment */
/* RX_MFF_TST1 8 bit Receive MAC FIFO Test Register 1 */
/* TX_MFF_TST1 8 bit Transmit MAC FIFO Test Register 1 */
/* Bit 7: reserved */
#define MFF_WP_T_ON BIT_6S /* Write Pointer Test On */
#define MFF_WP_T_OFF BIT_5S /* Write Pointer Test Off */
#define MFF_WP_INC BIT_4S /* Write Pointer Increm */
/* Bit 3: reserved */
#define MFF_RP_T_ON BIT_2S /* Read Pointer Test On */
#define MFF_RP_T_OFF BIT_1S /* Read Pointer Test Off */
#define MFF_RP_DEC BIT_0S /* Read Pointer Decrement */
/* RX_MFF_CTRL2 8 bit Receive MAC FIFO Control Reg 2 */
/* TX_MFF_CTRL2 8 bit Transmit MAC FIFO Control Reg 2 */
/* Bit 7..4: reserved */
#define MFF_ENA_OP_MD BIT_3S /* Enable Operation Mode */
#define MFF_DIS_OP_MD BIT_2S /* Disable Operation Mode */
#define MFF_RST_CLR BIT_1S /* Clear MAC FIFO Reset */
#define MFF_RST_SET BIT_0S /* Set MAC FIFO Reset */
/* Link LED Counter Registers (GENESIS only) */
/* RX_LED_CTRL 8 bit Receive LED Cnt Control Reg */
/* TX_LED_CTRL 8 bit Transmit LED Cnt Control Reg */
/* LNK_SYNC_CTRL 8 bit Link Sync Cnt Control Register */
/* Bit 7.. 3: reserved */
#define LED_START BIT_2S /* Start Timer */
#define LED_STOP BIT_1S /* Stop Timer */
#define LED_STATE BIT_0S /* Rx/Tx: LED State, 1=LED on */
#define LED_CLR_IRQ BIT_0S /* Lnk: Clear Link IRQ */
/* RX_LED_TST 8 bit Receive LED Cnt Test Register */
/* TX_LED_TST 8 bit Transmit LED Cnt Test Register */
/* LNK_SYNC_TST 8 bit Link Sync Cnt Test Register */
/* Bit 7.. 3: reserved */
#define LED_T_ON BIT_2S /* LED Counter Test mode On */
#define LED_T_OFF BIT_1S /* LED Counter Test mode Off */
#define LED_T_STEP BIT_0S /* LED Counter Step */
/* LNK_LED_REG 8 bit Link LED Register */
/* Bit 7.. 6: reserved */
#define LED_BLK_ON BIT_5S /* Link LED Blinking On */
#define LED_BLK_OFF BIT_4S /* Link LED Blinking Off */
#define LED_SYNC_ON BIT_3S /* Use Sync Wire to switch LED */
#define LED_SYNC_OFF BIT_2S /* Disable Sync Wire Input */
#define LED_ON BIT_1S /* switch LED on */
#define LED_OFF BIT_0S /* switch LED off */
/* Receive and Transmit GMAC FIFO Registers (YUKON only) */
/* RX_GMF_EA 32 bit Rx GMAC FIFO End Address */
/* RX_GMF_AF_THR 32 bit Rx GMAC FIFO Almost Full Thresh. */
/* RX_GMF_WP 32 bit Rx GMAC FIFO Write Pointer */
/* RX_GMF_WLEV 32 bit Rx GMAC FIFO Write Level */
/* RX_GMF_RP 32 bit Rx GMAC FIFO Read Pointer */
/* RX_GMF_RLEV 32 bit Rx GMAC FIFO Read Level */
/* TX_GMF_EA 32 bit Tx GMAC FIFO End Address */
/* TX_GMF_AE_THR 32 bit Tx GMAC FIFO Almost Empty Thresh.*/
/* TX_GMF_WP 32 bit Tx GMAC FIFO Write Pointer */
/* TX_GMF_WSP 32 bit Tx GMAC FIFO Write Shadow Ptr. */
/* TX_GMF_WLEV 32 bit Tx GMAC FIFO Write Level */
/* TX_GMF_RP 32 bit Tx GMAC FIFO Read Pointer */
/* TX_GMF_RSTP 32 bit Tx GMAC FIFO Restart Pointer */
/* TX_GMF_RLEV 32 bit Tx GMAC FIFO Read Level */
/* RX_GMF_CTRL_T 32 bit Rx GMAC FIFO Control/Test */
/* Bits 31..15: reserved */
#define GMF_WP_TST_ON BIT_14 /* Write Pointer Test On */
#define GMF_WP_TST_OFF BIT_13 /* Write Pointer Test Off */
#define GMF_WP_STEP BIT_12 /* Write Pointer Step/Increment */
/* Bit 11: reserved */
#define GMF_RP_TST_ON BIT_10 /* Read Pointer Test On */
#define GMF_RP_TST_OFF BIT_9 /* Read Pointer Test Off */
#define GMF_RP_STEP BIT_8 /* Read Pointer Step/Increment */
#define GMF_RX_F_FL_ON BIT_7 /* Rx FIFO Flush Mode On */
#define GMF_RX_F_FL_OFF BIT_6 /* Rx FIFO Flush Mode Off */
#define GMF_CLI_RX_FO BIT_5 /* Clear IRQ Rx FIFO Overrun */
#define GMF_CLI_RX_FC BIT_4 /* Clear IRQ Rx Frame Complete */
#define GMF_OPER_ON BIT_3 /* Operational Mode On */
#define GMF_OPER_OFF BIT_2 /* Operational Mode Off */
#define GMF_RST_CLR BIT_1 /* Clear GMAC FIFO Reset */
#define GMF_RST_SET BIT_0 /* Set GMAC FIFO Reset */
/* TX_GMF_CTRL_T 32 bit Tx GMAC FIFO Control/Test */
/* Bits 31..19: reserved */
#define GMF_WSP_TST_ON BIT_18 /* Write Shadow Pointer Test On */
#define GMF_WSP_TST_OFF BIT_17 /* Write Shadow Pointer Test Off */
#define GMF_WSP_STEP BIT_16 /* Write Shadow Pointer Step/Increment */
/* Bits 15..7: same as for RX_GMF_CTRL_T */
#define GMF_CLI_TX_FU BIT_6 /* Clear IRQ Tx FIFO Underrun */
#define GMF_CLI_TX_FC BIT_5 /* Clear IRQ Tx Frame Complete */
#define GMF_CLI_TX_PE BIT_4 /* Clear IRQ Tx Parity Error */
/* Bits 3..0: same as for RX_GMF_CTRL_T */
#define GMF_RX_CTRL_DEF (GMF_OPER_ON | GMF_RX_F_FL_ON)
#define GMF_TX_CTRL_DEF GMF_OPER_ON
#define RX_GMF_FL_THR_DEF 0x0a /* Rx GMAC FIFO Flush Threshold default */
/* GMAC_TI_ST_CTRL 8 bit Time Stamp Timer Ctrl Reg (YUKON only) */
/* Bit 7.. 3: reserved */
#define GMT_ST_START BIT_2S /* Start Time Stamp Timer */
#define GMT_ST_STOP BIT_1S /* Stop Time Stamp Timer */
#define GMT_ST_CLR_IRQ BIT_0S /* Clear Time Stamp Timer IRQ */
/* GMAC_CTRL 32 bit GMAC Control Reg (YUKON only) */
/* Bits 31.. 8: reserved */
#define GMC_H_BURST_ON BIT_7 /* Half Duplex Burst Mode On */
#define GMC_H_BURST_OFF BIT_6 /* Half Duplex Burst Mode Off */
#define GMC_F_LOOPB_ON BIT_5 /* FIFO Loopback On */
#define GMC_F_LOOPB_OFF BIT_4 /* FIFO Loopback Off */
#define GMC_PAUSE_ON BIT_3 /* Pause On */
#define GMC_PAUSE_OFF BIT_2 /* Pause Off */
#define GMC_RST_CLR BIT_1 /* Clear GMAC Reset */
#define GMC_RST_SET BIT_0 /* Set GMAC Reset */
/* GPHY_CTRL 32 bit GPHY Control Reg (YUKON only) */
/* Bits 31..29: reserved */
#define GPC_SEL_BDT BIT_28 /* Select Bi-Dir. Transfer for MDC/MDIO */
#define GPC_INT_POL_HI BIT_27 /* IRQ Polarity is Active HIGH */
#define GPC_75_OHM BIT_26 /* Use 75 Ohm Termination instead of 50 */
#define GPC_DIS_FC BIT_25 /* Disable Automatic Fiber/Copper Detection */
#define GPC_DIS_SLEEP BIT_24 /* Disable Energy Detect */
#define GPC_HWCFG_M_3 BIT_23 /* HWCFG_MODE[3] */
#define GPC_HWCFG_M_2 BIT_22 /* HWCFG_MODE[2] */
#define GPC_HWCFG_M_1 BIT_21 /* HWCFG_MODE[1] */
#define GPC_HWCFG_M_0 BIT_20 /* HWCFG_MODE[0] */
#define GPC_ANEG_0 BIT_19 /* ANEG[0] */
#define GPC_ENA_XC BIT_18 /* Enable MDI crossover */
#define GPC_DIS_125 BIT_17 /* Disable 125 MHz clock */
#define GPC_ANEG_3 BIT_16 /* ANEG[3] */
#define GPC_ANEG_2 BIT_15 /* ANEG[2] */
#define GPC_ANEG_1 BIT_14 /* ANEG[1] */
#define GPC_ENA_PAUSE BIT_13 /* Enable Pause (SYM_OR_REM) */
#define GPC_PHYADDR_4 BIT_12 /* Bit 4 of Phy Addr */
#define GPC_PHYADDR_3 BIT_11 /* Bit 3 of Phy Addr */
#define GPC_PHYADDR_2 BIT_10 /* Bit 2 of Phy Addr */
#define GPC_PHYADDR_1 BIT_9 /* Bit 1 of Phy Addr */
#define GPC_PHYADDR_0 BIT_8 /* Bit 0 of Phy Addr */
/* Bits 7..2: reserved */
#define GPC_RST_CLR BIT_1 /* Clear GPHY Reset */
#define GPC_RST_SET BIT_0 /* Set GPHY Reset */
#define GPC_HWCFG_GMII_COP (GPC_HWCFG_M_3 | GPC_HWCFG_M_2 | \
GPC_HWCFG_M_1 | GPC_HWCFG_M_0)
#define GPC_HWCFG_GMII_FIB ( GPC_HWCFG_M_2 | \
GPC_HWCFG_M_1 | GPC_HWCFG_M_0)
#define GPC_ANEG_ADV_ALL_M (GPC_ANEG_3 | GPC_ANEG_2 | \
GPC_ANEG_1 | GPC_ANEG_0)
/* forced speed and duplex mode (don't mix with other ANEG bits) */
#define GPC_FRC10MBIT_HALF 0
#define GPC_FRC10MBIT_FULL GPC_ANEG_0
#define GPC_FRC100MBIT_HALF GPC_ANEG_1
#define GPC_FRC100MBIT_FULL (GPC_ANEG_0 | GPC_ANEG_1)
/* auto-negotiation with limited advertised speeds */
/* mix only with master/slave settings (for copper) */
#define GPC_ADV_1000_HALF GPC_ANEG_2
#define GPC_ADV_1000_FULL GPC_ANEG_3
#define GPC_ADV_ALL (GPC_ANEG_2 | GPC_ANEG_3)
/* master/slave settings */
/* only for copper with 1000 Mbps */
#define GPC_FORCE_MASTER 0
#define GPC_FORCE_SLAVE GPC_ANEG_0
#define GPC_PREF_MASTER GPC_ANEG_1
#define GPC_PREF_SLAVE (GPC_ANEG_1 | GPC_ANEG_0)
/* GMAC_IRQ_SRC 8 bit GMAC Interrupt Source Reg (YUKON only) */
/* GMAC_IRQ_MSK 8 bit GMAC Interrupt Mask Reg (YUKON only) */
#define GM_IS_TX_CO_OV BIT_5 /* Transmit Counter Overflow IRQ */
#define GM_IS_RX_CO_OV BIT_4 /* Receive Counter Overflow IRQ */
#define GM_IS_TX_FF_UR BIT_3 /* Transmit FIFO Underrun */
#define GM_IS_TX_COMPL BIT_2 /* Frame Transmission Complete */
#define GM_IS_RX_FF_OR BIT_1 /* Receive FIFO Overrun */
#define GM_IS_RX_COMPL BIT_0 /* Frame Reception Complete */
#define GMAC_DEF_MSK (GM_IS_TX_CO_OV | GM_IS_RX_CO_OV | \
GM_IS_TX_FF_UR)
/* GMAC_LINK_CTRL 16 bit GMAC Link Control Reg (YUKON only) */
/* Bits 15.. 2: reserved */
#define GMLC_RST_CLR BIT_1S /* Clear GMAC Link Reset */
#define GMLC_RST_SET BIT_0S /* Set GMAC Link Reset */
/* WOL_CTRL_STAT 16 bit WOL Control/Status Reg */
#define WOL_CTL_LINK_CHG_OCC BIT_15S
#define WOL_CTL_MAGIC_PKT_OCC BIT_14S
#define WOL_CTL_PATTERN_OCC BIT_13S
#define WOL_CTL_CLEAR_RESULT BIT_12S
#define WOL_CTL_ENA_PME_ON_LINK_CHG BIT_11S
#define WOL_CTL_DIS_PME_ON_LINK_CHG BIT_10S
#define WOL_CTL_ENA_PME_ON_MAGIC_PKT BIT_9S
#define WOL_CTL_DIS_PME_ON_MAGIC_PKT BIT_8S
#define WOL_CTL_ENA_PME_ON_PATTERN BIT_7S
#define WOL_CTL_DIS_PME_ON_PATTERN BIT_6S
#define WOL_CTL_ENA_LINK_CHG_UNIT BIT_5S
#define WOL_CTL_DIS_LINK_CHG_UNIT BIT_4S
#define WOL_CTL_ENA_MAGIC_PKT_UNIT BIT_3S
#define WOL_CTL_DIS_MAGIC_PKT_UNIT BIT_2S
#define WOL_CTL_ENA_PATTERN_UNIT BIT_1S
#define WOL_CTL_DIS_PATTERN_UNIT BIT_0S
#define WOL_CTL_DEFAULT \
(WOL_CTL_DIS_PME_ON_LINK_CHG | \
WOL_CTL_DIS_PME_ON_PATTERN | \
WOL_CTL_DIS_PME_ON_MAGIC_PKT | \
WOL_CTL_DIS_LINK_CHG_UNIT | \
WOL_CTL_DIS_PATTERN_UNIT | \
WOL_CTL_DIS_MAGIC_PKT_UNIT)
/* WOL_MATCH_CTL 8 bit WOL Match Control Reg */
#define WOL_CTL_PATT_ENA(x) (BIT_0 << (x))
#define SK_NUM_WOL_PATTERN 7
#define SK_PATTERN_PER_WORD 4
#define SK_BITMASK_PATTERN 7
#define SK_POW_PATTERN_LENGTH 128
#define WOL_LENGTH_MSK 0x7f
#define WOL_LENGTH_SHIFT 8
/* Receive and Transmit Descriptors ******************************************/
/* Transmit Descriptor struct */
typedef struct s_HwTxd {
SK_U32 volatile TxCtrl; /* Transmit Buffer Control Field */
SK_U32 TxNext; /* Physical Address Pointer to the next TxD */
SK_U32 TxAdrLo; /* Physical Tx Buffer Address lower dword */
SK_U32 TxAdrHi; /* Physical Tx Buffer Address upper dword */
SK_U32 TxStat; /* Transmit Frame Status Word */
#ifndef SK_USE_REV_DESC
SK_U16 TxTcpOffs; /* TCP Checksum Calculation Start Value */
SK_U16 TxRes1; /* 16 bit reserved field */
SK_U16 TxTcpWp; /* TCP Checksum Write Position */
SK_U16 TxTcpSp; /* TCP Checksum Calculation Start Position */
#else /* SK_USE_REV_DESC */
SK_U16 TxRes1; /* 16 bit reserved field */
SK_U16 TxTcpOffs; /* TCP Checksum Calculation Start Value */
SK_U16 TxTcpSp; /* TCP Checksum Calculation Start Position */
SK_U16 TxTcpWp; /* TCP Checksum Write Position */
#endif /* SK_USE_REV_DESC */
SK_U32 TxRes2; /* 32 bit reserved field */
} SK_HWTXD;
/* Receive Descriptor struct */
typedef struct s_HwRxd {
SK_U32 volatile RxCtrl; /* Receive Buffer Control Field */
SK_U32 RxNext; /* Physical Address Pointer to the next RxD */
SK_U32 RxAdrLo; /* Physical Rx Buffer Address lower dword */
SK_U32 RxAdrHi; /* Physical Rx Buffer Address upper dword */
SK_U32 RxStat; /* Receive Frame Status Word */
SK_U32 RxTiSt; /* Receive Time Stamp (from XMAC on GENESIS) */
#ifndef SK_USE_REV_DESC
SK_U16 RxTcpSum1; /* TCP Checksum 1 */
SK_U16 RxTcpSum2; /* TCP Checksum 2 */
SK_U16 RxTcpSp1; /* TCP Checksum Calculation Start Position 1 */
SK_U16 RxTcpSp2; /* TCP Checksum Calculation Start Position 2 */
#else /* SK_USE_REV_DESC */
SK_U16 RxTcpSum2; /* TCP Checksum 2 */
SK_U16 RxTcpSum1; /* TCP Checksum 1 */
SK_U16 RxTcpSp2; /* TCP Checksum Calculation Start Position 2 */
SK_U16 RxTcpSp1; /* TCP Checksum Calculation Start Position 1 */
#endif /* SK_USE_REV_DESC */
} SK_HWRXD;
/*
* Drivers which use the reverse descriptor feature (PCI_OUR_REG_2)
* should set the define SK_USE_REV_DESC.
* Structures are 'normaly' not endianess dependent. But in
* this case the SK_U16 fields are bound to bit positions inside the
* descriptor. RxTcpSum1 e.g. must start at bit 0 within the 6.th DWord.
* The bit positions inside a DWord are of course endianess dependent and
* swaps if the DWord is swapped by the hardware.
*/
/* Descriptor Bit Definition */
/* TxCtrl Transmit Buffer Control Field */
/* RxCtrl Receive Buffer Control Field */
#define BMU_OWN BIT_31 /* OWN bit: 0=host/1=BMU */
#define BMU_STF BIT_30 /* Start of Frame */
#define BMU_EOF BIT_29 /* End of Frame */
#define BMU_IRQ_EOB BIT_28 /* Req "End of Buffer" IRQ */
#define BMU_IRQ_EOF BIT_27 /* Req "End of Frame" IRQ */
/* TxCtrl specific bits */
#define BMU_STFWD BIT_26 /* (Tx) Store & Forward Frame */
#define BMU_NO_FCS BIT_25 /* (Tx) Disable MAC FCS (CRC) generation */
#define BMU_SW BIT_24 /* (Tx) 1 bit res. for SW use */
/* RxCtrl specific bits */
#define BMU_DEV_0 BIT_26 /* (Rx) Transfer data to Dev0 */
#define BMU_STAT_VAL BIT_25 /* (Rx) Rx Status Valid */
#define BMU_TIST_VAL BIT_24 /* (Rx) Rx TimeStamp Valid */
/* Bit 23..16: BMU Check Opcodes */
#define BMU_CHECK (0x55L<<16) /* Default BMU check */
#define BMU_TCP_CHECK (0x56L<<16) /* Descr with TCP ext */
#define BMU_UDP_CHECK (0x57L<<16) /* Descr with UDP ext (YUKON only) */
#define BMU_BBC 0xffffL /* Bit 15.. 0: Buffer Byte Counter */
/* TxStat Transmit Frame Status Word */
/* RxStat Receive Frame Status Word */
/*
*Note: TxStat is reserved for ASIC loopback mode only
*
* The Bits of the Status words are defined in xmac_ii.h
* (see XMR_FS bits)
*/
/* macros ********************************************************************/
/* Receive and Transmit Queues */
#define Q_R1 0x0000 /* Receive Queue 1 */
#define Q_R2 0x0080 /* Receive Queue 2 */
#define Q_XS1 0x0200 /* Synchronous Transmit Queue 1 */
#define Q_XA1 0x0280 /* Asynchronous Transmit Queue 1 */
#define Q_XS2 0x0300 /* Synchronous Transmit Queue 2 */
#define Q_XA2 0x0380 /* Asynchronous Transmit Queue 2 */
/*
* Macro Q_ADDR()
*
* Use this macro to access the Receive and Transmit Queue Registers.
*
* para:
* Queue Queue to access.
* Values: Q_R1, Q_R2, Q_XS1, Q_XA1, Q_XS2, and Q_XA2
* Offs Queue register offset.
* Values: Q_D, Q_DA_L ... Q_T2, Q_T3
*
* usage SK_IN32(pAC, Q_ADDR(Q_R2, Q_BC), pVal)
*/
#define Q_ADDR(Queue, Offs) (B8_Q_REGS + (Queue) + (Offs))
/*
* Macro RB_ADDR()
*
* Use this macro to access the RAM Buffer Registers.
*
* para:
* Queue Queue to access.
* Values: Q_R1, Q_R2, Q_XS1, Q_XA1, Q_XS2, and Q_XA2
* Offs Queue register offset.
* Values: RB_START, RB_END ... RB_LEV, RB_CTRL
*
* usage SK_IN32(pAC, RB_ADDR(Q_R2, RB_RP), pVal)
*/
#define RB_ADDR(Queue, Offs) (B16_RAM_REGS + (Queue) + (Offs))
/* MAC Related Registers */
#define MAC_1 0 /* belongs to the port near the slot */
#define MAC_2 1 /* belongs to the port far away from the slot */
/*
* Macro MR_ADDR()
*
* Use this macro to access a MAC Related Registers inside the ASIC.
*
* para:
* Mac MAC to access.
* Values: MAC_1, MAC_2
* Offs MAC register offset.
* Values: RX_MFF_EA, RX_MFF_WP ... LNK_LED_REG,
* TX_MFF_EA, TX_MFF_WP ... TX_LED_TST
*
* usage SK_IN32(pAC, MR_ADDR(MAC_1, TX_MFF_EA), pVal)
*/
#define MR_ADDR(Mac, Offs) (((Mac) << 7) + (Offs))
#ifdef SK_LITTLE_ENDIAN
#define XM_WORD_LO 0
#define XM_WORD_HI 1
#else /* !SK_LITTLE_ENDIAN */
#define XM_WORD_LO 1
#define XM_WORD_HI 0
#endif /* !SK_LITTLE_ENDIAN */
/*
* macros to access the XMAC (GENESIS only)
*
* XM_IN16(), to read a 16 bit register (e.g. XM_MMU_CMD)
* XM_OUT16(), to write a 16 bit register (e.g. XM_MMU_CMD)
* XM_IN32(), to read a 32 bit register (e.g. XM_TX_EV_CNT)
* XM_OUT32(), to write a 32 bit register (e.g. XM_TX_EV_CNT)
* XM_INADDR(), to read a network address register (e.g. XM_SRC_CHK)
* XM_OUTADDR(), to write a network address register (e.g. XM_SRC_CHK)
* XM_INHASH(), to read the XM_HSM_CHK register
* XM_OUTHASH() to write the XM_HSM_CHK register
*
* para:
* Mac XMAC to access values: MAC_1 or MAC_2
* IoC I/O context needed for SK I/O macros
* Reg XMAC Register to read or write
* (p)Val Value or pointer to the value which should be read or written
*
* usage: XM_OUT16(IoC, MAC_1, XM_MMU_CMD, Value);
*/
#define XMA(Mac, Reg) \
((BASE_XMAC_1 + (Mac) * (BASE_XMAC_2 - BASE_XMAC_1)) | ((Reg) << 1))
#define XM_IN16(IoC, Mac, Reg, pVal) \
SK_IN16((IoC), XMA((Mac), (Reg)), (pVal))
#define XM_OUT16(IoC, Mac, Reg, Val) \
SK_OUT16((IoC), XMA((Mac), (Reg)), (Val))
#define XM_IN32(IoC, Mac, Reg, pVal) { \
SK_IN16((IoC), XMA((Mac), (Reg)), \
(SK_U16 SK_FAR*)&((SK_U16 SK_FAR*)(pVal))[XM_WORD_LO]); \
SK_IN16((IoC), XMA((Mac), (Reg+2)), \
(SK_U16 SK_FAR*)&((SK_U16 SK_FAR*)(pVal))[XM_WORD_HI]); \
}
#define XM_OUT32(IoC, Mac, Reg, Val) { \
SK_OUT16((IoC), XMA((Mac), (Reg)), (SK_U16)((Val) & 0xffffL)); \
SK_OUT16((IoC), XMA((Mac), (Reg+2)), (SK_U16)(((Val) >> 16) & 0xffffL));\
}
/* Remember: we are always writing to / reading from LITTLE ENDIAN memory */
#define XM_INADDR(IoC, Mac, Reg, pVal) { \
SK_U16 Word; \
SK_U8 *pByte; \
pByte = (SK_U8 *)&((SK_U8 *)(pVal))[0]; \
SK_IN16((IoC), XMA((Mac), (Reg)), &Word); \
pByte[0] = (SK_U8)(Word & 0x00ff); \
pByte[1] = (SK_U8)((Word >> 8) & 0x00ff); \
SK_IN16((IoC), XMA((Mac), (Reg+2)), &Word); \
pByte[2] = (SK_U8)(Word & 0x00ff); \
pByte[3] = (SK_U8)((Word >> 8) & 0x00ff); \
SK_IN16((IoC), XMA((Mac), (Reg+4)), &Word); \
pByte[4] = (SK_U8)(Word & 0x00ff); \
pByte[5] = (SK_U8)((Word >> 8) & 0x00ff); \
}
#define XM_OUTADDR(IoC, Mac, Reg, pVal) { \
SK_U8 SK_FAR *pByte; \
pByte = (SK_U8 SK_FAR *)&((SK_U8 SK_FAR *)(pVal))[0]; \
SK_OUT16((IoC), XMA((Mac), (Reg)), (SK_U16) \
(((SK_U16)(pByte[0]) & 0x00ff) | \
(((SK_U16)(pByte[1]) << 8) & 0xff00))); \
SK_OUT16((IoC), XMA((Mac), (Reg+2)), (SK_U16) \
(((SK_U16)(pByte[2]) & 0x00ff) | \
(((SK_U16)(pByte[3]) << 8) & 0xff00))); \
SK_OUT16((IoC), XMA((Mac), (Reg+4)), (SK_U16) \
(((SK_U16)(pByte[4]) & 0x00ff) | \
(((SK_U16)(pByte[5]) << 8) & 0xff00))); \
}
#define XM_INHASH(IoC, Mac, Reg, pVal) { \
SK_U16 Word; \
SK_U8 SK_FAR *pByte; \
pByte = (SK_U8 SK_FAR *)&((SK_U8 SK_FAR *)(pVal))[0]; \
SK_IN16((IoC), XMA((Mac), (Reg)), &Word); \
pByte[0] = (SK_U8)(Word & 0x00ff); \
pByte[1] = (SK_U8)((Word >> 8) & 0x00ff); \
SK_IN16((IoC), XMA((Mac), (Reg+2)), &Word); \
pByte[2] = (SK_U8)(Word & 0x00ff); \
pByte[3] = (SK_U8)((Word >> 8) & 0x00ff); \
SK_IN16((IoC), XMA((Mac), (Reg+4)), &Word); \
pByte[4] = (SK_U8)(Word & 0x00ff); \
pByte[5] = (SK_U8)((Word >> 8) & 0x00ff); \
SK_IN16((IoC), XMA((Mac), (Reg+6)), &Word); \
pByte[6] = (SK_U8)(Word & 0x00ff); \
pByte[7] = (SK_U8)((Word >> 8) & 0x00ff); \
}
#define XM_OUTHASH(IoC, Mac, Reg, pVal) { \
SK_U8 SK_FAR *pByte; \
pByte = (SK_U8 SK_FAR *)&((SK_U8 SK_FAR *)(pVal))[0]; \
SK_OUT16((IoC), XMA((Mac), (Reg)), (SK_U16) \
(((SK_U16)(pByte[0]) & 0x00ff)| \
(((SK_U16)(pByte[1]) << 8) & 0xff00))); \
SK_OUT16((IoC), XMA((Mac), (Reg+2)), (SK_U16) \
(((SK_U16)(pByte[2]) & 0x00ff)| \
(((SK_U16)(pByte[3]) << 8) & 0xff00))); \
SK_OUT16((IoC), XMA((Mac), (Reg+4)), (SK_U16) \
(((SK_U16)(pByte[4]) & 0x00ff)| \
(((SK_U16)(pByte[5]) << 8) & 0xff00))); \
SK_OUT16((IoC), XMA((Mac), (Reg+6)), (SK_U16) \
(((SK_U16)(pByte[6]) & 0x00ff)| \
(((SK_U16)(pByte[7]) << 8) & 0xff00))); \
}
/*
* macros to access the GMAC (YUKON only)
*
* GM_IN16(), to read a 16 bit register (e.g. GM_GP_STAT)
* GM_OUT16(), to write a 16 bit register (e.g. GM_GP_CTRL)
* GM_IN32(), to read a 32 bit register (e.g. GM_)
* GM_OUT32(), to write a 32 bit register (e.g. GM_)
* GM_INADDR(), to read a network address register (e.g. GM_SRC_ADDR_1L)
* GM_OUTADDR(), to write a network address register (e.g. GM_SRC_ADDR_2L)
* GM_INHASH(), to read the GM_MC_ADDR_H1 register
* GM_OUTHASH() to write the GM_MC_ADDR_H1 register
*
* para:
* Mac GMAC to access values: MAC_1 or MAC_2
* IoC I/O context needed for SK I/O macros
* Reg GMAC Register to read or write
* (p)Val Value or pointer to the value which should be read or written
*
* usage: GM_OUT16(IoC, MAC_1, GM_GP_CTRL, Value);
*/
#define GMA(Mac, Reg) \
((BASE_GMAC_1 + (Mac) * (BASE_GMAC_2 - BASE_GMAC_1)) | (Reg))
#define GM_IN16(IoC, Mac, Reg, pVal) \
SK_IN16((IoC), GMA((Mac), (Reg)), (pVal))
#define GM_OUT16(IoC, Mac, Reg, Val) \
SK_OUT16((IoC), GMA((Mac), (Reg)), (Val))
#define GM_IN32(IoC, Mac, Reg, pVal) { \
SK_IN16((IoC), GMA((Mac), (Reg)), \
(SK_U16 SK_FAR*)&((SK_U16 SK_FAR*)(pVal))[XM_WORD_LO]); \
SK_IN16((IoC), GMA((Mac), (Reg+4)), \
(SK_U16 SK_FAR*)&((SK_U16 SK_FAR*)(pVal))[XM_WORD_HI]); \
}
#define GM_OUT32(IoC, Mac, Reg, Val) { \
SK_OUT16((IoC), GMA((Mac), (Reg)), (SK_U16)((Val) & 0xffffL)); \
SK_OUT16((IoC), GMA((Mac), (Reg+4)), (SK_U16)(((Val) >> 16) & 0xffffL));\
}
#define GM_INADDR(IoC, Mac, Reg, pVal) { \
SK_U16 Word; \
SK_U8 *pByte; \
pByte = (SK_U8 *)&((SK_U8 *)(pVal))[0]; \
SK_IN16((IoC), GMA((Mac), (Reg)), &Word); \
pByte[0] = (SK_U8)(Word & 0x00ff); \
pByte[1] = (SK_U8)((Word >> 8) & 0x00ff); \
SK_IN16((IoC), GMA((Mac), (Reg+4)), &Word); \
pByte[2] = (SK_U8)(Word & 0x00ff); \
pByte[3] = (SK_U8)((Word >> 8) & 0x00ff); \
SK_IN16((IoC), GMA((Mac), (Reg+8)), &Word); \
pByte[4] = (SK_U8)(Word & 0x00ff); \
pByte[5] = (SK_U8)((Word >> 8) & 0x00ff); \
}
#define GM_OUTADDR(IoC, Mac, Reg, pVal) { \
SK_U8 SK_FAR *pByte; \
pByte = (SK_U8 SK_FAR *)&((SK_U8 SK_FAR *)(pVal))[0]; \
SK_OUT16((IoC), GMA((Mac), (Reg)), (SK_U16) \
(((SK_U16)(pByte[0]) & 0x00ff) | \
(((SK_U16)(pByte[1]) << 8) & 0xff00))); \
SK_OUT16((IoC), GMA((Mac), (Reg+4)), (SK_U16) \
(((SK_U16)(pByte[2]) & 0x00ff) | \
(((SK_U16)(pByte[3]) << 8) & 0xff00))); \
SK_OUT16((IoC), GMA((Mac), (Reg+8)), (SK_U16) \
(((SK_U16)(pByte[4]) & 0x00ff) | \
(((SK_U16)(pByte[5]) << 8) & 0xff00))); \
}
#define GM_INHASH(IoC, Mac, Reg, pVal) { \
SK_U16 Word; \
SK_U8 *pByte; \
pByte = (SK_U8 *)&((SK_U8 *)(pVal))[0]; \
SK_IN16((IoC), GMA((Mac), (Reg)), &Word); \
pByte[0] = (SK_U8)(Word & 0x00ff); \
pByte[1] = (SK_U8)((Word >> 8) & 0x00ff); \
SK_IN16((IoC), GMA((Mac), (Reg+4)), &Word); \
pByte[2] = (SK_U8)(Word & 0x00ff); \
pByte[3] = (SK_U8)((Word >> 8) & 0x00ff); \
SK_IN16((IoC), GMA((Mac), (Reg+8)), &Word); \
pByte[4] = (SK_U8)(Word & 0x00ff); \
pByte[5] = (SK_U8)((Word >> 8) & 0x00ff); \
SK_IN16((IoC), GMA((Mac), (Reg+12)), &Word); \
pByte[6] = (SK_U8)(Word & 0x00ff); \
pByte[7] = (SK_U8)((Word >> 8) & 0x00ff); \
}
#define GM_OUTHASH(IoC, Mac, Reg, pVal) { \
SK_U8 *pByte; \
pByte = (SK_U8 *)&((SK_U8 *)(pVal))[0]; \
SK_OUT16((IoC), GMA((Mac), (Reg)), (SK_U16) \
(((SK_U16)(pByte[0]) & 0x00ff)| \
(((SK_U16)(pByte[1]) << 8) & 0xff00))); \
SK_OUT16((IoC), GMA((Mac), (Reg+4)), (SK_U16) \
(((SK_U16)(pByte[2]) & 0x00ff)| \
(((SK_U16)(pByte[3]) << 8) & 0xff00))); \
SK_OUT16((IoC), GMA((Mac), (Reg+8)), (SK_U16) \
(((SK_U16)(pByte[4]) & 0x00ff)| \
(((SK_U16)(pByte[5]) << 8) & 0xff00))); \
SK_OUT16((IoC), GMA((Mac), (Reg+12)), (SK_U16) \
(((SK_U16)(pByte[6]) & 0x00ff)| \
(((SK_U16)(pByte[7]) << 8) & 0xff00))); \
}
/*
* Different MAC Types
*/
#define SK_MAC_XMAC 0 /* Xaqti XMAC II */
#define SK_MAC_GMAC 1 /* Marvell GMAC */
/*
* Different PHY Types
*/
#define SK_PHY_XMAC 0 /* integrated in XMAC II */
#define SK_PHY_BCOM 1 /* Broadcom BCM5400 */
#define SK_PHY_LONE 2 /* Level One LXT1000 */
#define SK_PHY_NAT 3 /* National DP83891 */
#define SK_PHY_MARV_COPPER 4 /* Marvell 88E1011S */
#define SK_PHY_MARV_FIBER 5 /* Marvell 88E1011S working on fiber */
/*
* PHY addresses (bits 12..8 of PHY address reg)
*/
#define PHY_ADDR_XMAC (0<<8)
#define PHY_ADDR_BCOM (1<<8)
#define PHY_ADDR_LONE (3<<8)
#define PHY_ADDR_NAT (0<<8)
/* GPHY address (bits 15..11 of SMI control reg) */
#define PHY_ADDR_MARV 0
/*
* macros to access the PHY
*
* PHY_READ() read a 16 bit value from the PHY
* PHY_WRITE() write a 16 bit value to the PHY
*
* para:
* IoC I/O context needed for SK I/O macros
* pPort Pointer to port struct for PhyAddr
* Mac XMAC to access values: MAC_1 or MAC_2
* PhyReg PHY Register to read or write
* (p)Val Value or pointer to the value which should be read or
* written.
*
* usage: PHY_READ(IoC, pPort, MAC_1, PHY_CTRL, Value);
* Warning: a PHY_READ on an uninitialized PHY (PHY still in reset) never
* comes back. This is checked in DEBUG mode.
*/
#ifndef DEBUG
#define PHY_READ(IoC, pPort, Mac, PhyReg, pVal) { \
SK_U16 Mmu; \
\
XM_OUT16((IoC), (Mac), XM_PHY_ADDR, (PhyReg) | (pPort)->PhyAddr); \
XM_IN16((IoC), (Mac), XM_PHY_DATA, (pVal)); \
if ((pPort)->PhyType != SK_PHY_XMAC) { \
do { \
XM_IN16((IoC), (Mac), XM_MMU_CMD, &Mmu); \
} while ((Mmu & XM_MMU_PHY_RDY) == 0); \
XM_IN16((IoC), (Mac), XM_PHY_DATA, (pVal)); \
} \
}
#else
#define PHY_READ(IoC, pPort, Mac, PhyReg, pVal) { \
SK_U16 Mmu; \
int __i = 0; \
\
XM_OUT16((IoC), (Mac), XM_PHY_ADDR, (PhyReg) | (pPort)->PhyAddr); \
XM_IN16((IoC), (Mac), XM_PHY_DATA, (pVal)); \
if ((pPort)->PhyType != SK_PHY_XMAC) { \
do { \
XM_IN16((IoC), (Mac), XM_MMU_CMD, &Mmu); \
__i++; \
if (__i > 100000) { \
SK_DBG_PRINTF("*****************************\n"); \
SK_DBG_PRINTF("PHY_READ on uninitialized PHY\n"); \
SK_DBG_PRINTF("*****************************\n"); \
break; \
} \
} while ((Mmu & XM_MMU_PHY_RDY) == 0); \
XM_IN16((IoC), (Mac), XM_PHY_DATA, (pVal)); \
} \
}
#endif /* DEBUG */
#define PHY_WRITE(IoC, pPort, Mac, PhyReg, Val) { \
SK_U16 Mmu; \
\
if ((pPort)->PhyType != SK_PHY_XMAC) { \
do { \
XM_IN16((IoC), (Mac), XM_MMU_CMD, &Mmu); \
} while ((Mmu & XM_MMU_PHY_BUSY) != 0); \
} \
XM_OUT16((IoC), (Mac), XM_PHY_ADDR, (PhyReg) | (pPort)->PhyAddr); \
XM_OUT16((IoC), (Mac), XM_PHY_DATA, (Val)); \
if ((pPort)->PhyType != SK_PHY_XMAC) { \
do { \
XM_IN16((IoC), (Mac), XM_MMU_CMD, &Mmu); \
} while ((Mmu & XM_MMU_PHY_BUSY) != 0); \
} \
}
/*
* Macro PCI_C()
*
* Use this macro to access PCI config register from the I/O space.
*
* para:
* Addr PCI configuration register to access.
* Values: PCI_VENDOR_ID ... PCI_VPD_ADR_REG,
*
* usage SK_IN16(pAC, PCI_C(PCI_VENDOR_ID), pVal);
*/
#define PCI_C(Addr) (B7_CFG_SPC + (Addr)) /* PCI Config Space */
/*
* Macro SK_HW_ADDR(Base, Addr)
*
* Calculates the effective HW address
*
* para:
* Base I/O or memory base address
* Addr Address offset
*
* usage: May be used in SK_INxx and SK_OUTxx macros
* #define SK_IN8(pAC, Addr, pVal) ...\
* *pVal = (SK_U8)inp(SK_HW_ADDR(pAC->Hw.Iop, Addr)))
*/
#ifdef SK_MEM_MAPPED_IO
#define SK_HW_ADDR(Base, Addr) ((Base) + (Addr))
#else /* SK_MEM_MAPPED_IO */
#define SK_HW_ADDR(Base, Addr) \
((Base) + (((Addr) & 0x7f) | (((Addr) >> 7 > 0) ? 0x80 : 0)))
#endif /* SK_MEM_MAPPED_IO */
#define SZ_LONG (sizeof(SK_U32))
/*
* Macro SK_HWAC_LINK_LED()
*
* Use this macro to set the link LED mode.
* para:
* pAC Pointer to adapter context struct
* IoC I/O context needed for SK I/O macros
* Port Port number
* Mode Mode to set for this LED
*/
#define SK_HWAC_LINK_LED(pAC, IoC, Port, Mode) \
SK_OUT8(IoC, MR_ADDR(Port, LNK_LED_REG), Mode);
/* typedefs *******************************************************************/
/* function prototypes ********************************************************/
#ifdef __cplusplus
}
#endif /* __cplusplus */
#endif /* __INC_SKGEHW_H */
