/*
* Helper functions for the SPI-3 bridge FPGA on the Radisys ENP2611
* Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
* Dedicated to Marija Kulikova.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/config.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <asm/io.h>
#include "caleb.h"
#define CALEB_IDLO 0x00
#define CALEB_IDHI 0x01
#define CALEB_RID 0x02
#define CALEB_RESET 0x03
#define CALEB_INTREN0 0x04
#define CALEB_INTREN1 0x05
#define CALEB_INTRSTAT0 0x06
#define CALEB_INTRSTAT1 0x07
#define CALEB_PORTEN 0x08
#define CALEB_BURST 0x09
#define CALEB_PORTPAUS 0x0A
#define CALEB_PORTPAUSD 0x0B
#define CALEB_PHY0RX 0x10
#define CALEB_PHY1RX 0x11
#define CALEB_PHY0TX 0x12
#define CALEB_PHY1TX 0x13
#define CALEB_IXPRX_HI_CNTR 0x15
#define CALEB_PHY0RX_HI_CNTR 0x16
#define CALEB_PHY1RX_HI_CNTR 0x17
#define CALEB_IXPRX_CNTR 0x18
#define CALEB_PHY0RX_CNTR 0x19
#define CALEB_PHY1RX_CNTR 0x1A
#define CALEB_IXPTX_CNTR 0x1B
#define CALEB_PHY0TX_CNTR 0x1C
#define CALEB_PHY1TX_CNTR 0x1D
#define CALEB_DEBUG0 0x1E
#define CALEB_DEBUG1 0x1F
static u8 caleb_reg_read(int reg)
{
u8 value;
value = *((volatile u8 *)(ENP2611_CALEB_VIRT_BASE + reg));
// printk(KERN_INFO "caleb_reg_read(%d) = %.2x\n", reg, value);
return value;
}
static void caleb_reg_write(int reg, u8 value)
{
u8 dummy;
// printk(KERN_INFO "caleb_reg_write(%d, %.2x)\n", reg, value);
*((volatile u8 *)(ENP2611_CALEB_VIRT_BASE + reg)) = value;
dummy = *((volatile u8 *)ENP2611_CALEB_VIRT_BASE);
__asm__ __volatile__("mov %0, %0" : "+r" (dummy));
}
void caleb_reset(void)
{
/*
* Perform a chip reset.
*/
caleb_reg_write(CALEB_RESET, 0x02);
udelay(1);
/*
* Enable all interrupt sources. This is needed to get
* meaningful results out of the status bits (register 6
* and 7.)
*/
caleb_reg_write(CALEB_INTREN0, 0xff);
caleb_reg_write(CALEB_INTREN1, 0x07);
/*
* Set RX and TX FIFO thresholds to 1.5kb.
*/
caleb_reg_write(CALEB_PHY0RX, 0x11);
caleb_reg_write(CALEB_PHY1RX, 0x11);
caleb_reg_write(CALEB_PHY0TX, 0x11);
caleb_reg_write(CALEB_PHY1TX, 0x11);
/*
* Program SPI-3 burst size.
*/
caleb_reg_write(CALEB_BURST, 0); // 64-byte RBUF mpackets
// caleb_reg_write(CALEB_BURST, 1); // 128-byte RBUF mpackets
// caleb_reg_write(CALEB_BURST, 2); // 256-byte RBUF mpackets
}
void caleb_enable_rx(int port)
{
u8 temp;
temp = caleb_reg_read(CALEB_PORTEN);
temp |= 1 << port;
caleb_reg_write(CALEB_PORTEN, temp);
}
void caleb_disable_rx(int port)
{
u8 temp;
temp = caleb_reg_read(CALEB_PORTEN);
temp &= ~(1 << port);
caleb_reg_write(CALEB_PORTEN, temp);
}
void caleb_enable_tx(int port)
{
u8 temp;
temp = caleb_reg_read(CALEB_PORTEN);
temp |= 1 << (port + 4);
caleb_reg_write(CALEB_PORTEN, temp);
}
void caleb_disable_tx(int port)
{
u8 temp;
temp = caleb_reg_read(CALEB_PORTEN);
temp &= ~(1 << (port + 4));
caleb_reg_write(CALEB_PORTEN, temp);
}
