/*******************************************************************************
Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
This program is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the Free
Software Foundation; either version 2 of the License, or (at your option)
any later version.
This program is distributed in the hope that it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
You should have received a copy of the GNU General Public License along with
this program; if not, write to the Free Software Foundation, Inc., 59
Temple Place - Suite 330, Boston, MA 02111-1307, USA.
The full GNU General Public License is included in this distribution in the
file called LICENSE.
Contact Information:
Linux NICS <linux.nics@intel.com>
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*******************************************************************************/
/* e1000_hw.h
* Structures, enums, and macros for the MAC
*/
#ifndef _E1000_HW_H_
#define _E1000_HW_H_
#include "e1000_osdep.h"
/* Forward declarations of structures used by the shared code */
struct e1000_hw;
struct e1000_hw_stats;
/* Enumerated types specific to the e1000 hardware */
/* Media Access Controlers */
typedef enum {
e1000_undefined = 0,
e1000_82542_rev2_0,
e1000_82542_rev2_1,
e1000_82543,
e1000_82544,
e1000_82540,
e1000_82545,
e1000_82545_rev_3,
e1000_82546,
e1000_82546_rev_3,
e1000_82541,
e1000_82541_rev_2,
e1000_82547,
e1000_82547_rev_2,
e1000_82571,
e1000_82572,
e1000_82573,
e1000_num_macs
} e1000_mac_type;
typedef enum {
e1000_eeprom_uninitialized = 0,
e1000_eeprom_spi,
e1000_eeprom_microwire,
e1000_eeprom_flash,
e1000_eeprom_none, /* No NVM support */
e1000_num_eeprom_types
} e1000_eeprom_type;
/* Media Types */
typedef enum {
e1000_media_type_copper = 0,
e1000_media_type_fiber = 1,
e1000_media_type_internal_serdes = 2,
e1000_num_media_types
} e1000_media_type;
typedef enum {
e1000_10_half = 0,
e1000_10_full = 1,
e1000_100_half = 2,
e1000_100_full = 3
} e1000_speed_duplex_type;
/* Flow Control Settings */
typedef enum {
e1000_fc_none = 0,
e1000_fc_rx_pause = 1,
e1000_fc_tx_pause = 2,
e1000_fc_full = 3,
e1000_fc_default = 0xFF
} e1000_fc_type;
/* PCI bus types */
typedef enum {
e1000_bus_type_unknown = 0,
e1000_bus_type_pci,
e1000_bus_type_pcix,
e1000_bus_type_pci_express,
e1000_bus_type_reserved
} e1000_bus_type;
/* PCI bus speeds */
typedef enum {
e1000_bus_speed_unknown = 0,
e1000_bus_speed_33,
e1000_bus_speed_66,
e1000_bus_speed_100,
e1000_bus_speed_120,
e1000_bus_speed_133,
e1000_bus_speed_2500,
e1000_bus_speed_reserved
} e1000_bus_speed;
/* PCI bus widths */
typedef enum {
e1000_bus_width_unknown = 0,
e1000_bus_width_32,
e1000_bus_width_64,
e1000_bus_width_pciex_1,
e1000_bus_width_pciex_2,
e1000_bus_width_pciex_4,
e1000_bus_width_reserved
} e1000_bus_width;
/* PHY status info structure and supporting enums */
typedef enum {
e1000_cable_length_50 = 0,
e1000_cable_length_50_80,
e1000_cable_length_80_110,
e1000_cable_length_110_140,
e1000_cable_length_140,
e1000_cable_length_undefined = 0xFF
} e1000_cable_length;
typedef enum {
e1000_igp_cable_length_10 = 10,
e1000_igp_cable_length_20 = 20,
e1000_igp_cable_length_30 = 30,
e1000_igp_cable_length_40 = 40,
e1000_igp_cable_length_50 = 50,
e1000_igp_cable_length_60 = 60,
e1000_igp_cable_length_70 = 70,
e1000_igp_cable_length_80 = 80,
e1000_igp_cable_length_90 = 90,
e1000_igp_cable_length_100 = 100,
e1000_igp_cable_length_110 = 110,
e1000_igp_cable_length_115 = 115,
e1000_igp_cable_length_120 = 120,
e1000_igp_cable_length_130 = 130,
e1000_igp_cable_length_140 = 140,
e1000_igp_cable_length_150 = 150,
e1000_igp_cable_length_160 = 160,
e1000_igp_cable_length_170 = 170,
e1000_igp_cable_length_180 = 180
} e1000_igp_cable_length;
typedef enum {
e1000_10bt_ext_dist_enable_normal = 0,
e1000_10bt_ext_dist_enable_lower,
e1000_10bt_ext_dist_enable_undefined = 0xFF
} e1000_10bt_ext_dist_enable;
typedef enum {
e1000_rev_polarity_normal = 0,
e1000_rev_polarity_reversed,
e1000_rev_polarity_undefined = 0xFF
} e1000_rev_polarity;
typedef enum {
e1000_downshift_normal = 0,
e1000_downshift_activated,
e1000_downshift_undefined = 0xFF
} e1000_downshift;
typedef enum {
e1000_smart_speed_default = 0,
e1000_smart_speed_on,
e1000_smart_speed_off
} e1000_smart_speed;
typedef enum {
e1000_polarity_reversal_enabled = 0,
e1000_polarity_reversal_disabled,
e1000_polarity_reversal_undefined = 0xFF
} e1000_polarity_reversal;
typedef enum {
e1000_auto_x_mode_manual_mdi = 0,
e1000_auto_x_mode_manual_mdix,
e1000_auto_x_mode_auto1,
e1000_auto_x_mode_auto2,
e1000_auto_x_mode_undefined = 0xFF
} e1000_auto_x_mode;
typedef enum {
e1000_1000t_rx_status_not_ok = 0,
e1000_1000t_rx_status_ok,
e1000_1000t_rx_status_undefined = 0xFF
} e1000_1000t_rx_status;
typedef enum {
e1000_phy_m88 = 0,
e1000_phy_igp,
e1000_phy_igp_2,
e1000_phy_undefined = 0xFF
} e1000_phy_type;
typedef enum {
e1000_ms_hw_default = 0,
e1000_ms_force_master,
e1000_ms_force_slave,
e1000_ms_auto
} e1000_ms_type;
typedef enum {
e1000_ffe_config_enabled = 0,
e1000_ffe_config_active,
e1000_ffe_config_blocked
} e1000_ffe_config;
typedef enum {
e1000_dsp_config_disabled = 0,
e1000_dsp_config_enabled,
e1000_dsp_config_activated,
e1000_dsp_config_undefined = 0xFF
} e1000_dsp_config;
struct e1000_phy_info {
e1000_cable_length cable_length;
e1000_10bt_ext_dist_enable extended_10bt_distance;
e1000_rev_polarity cable_polarity;
e1000_downshift downshift;
e1000_polarity_reversal polarity_correction;
e1000_auto_x_mode mdix_mode;
e1000_1000t_rx_status local_rx;
e1000_1000t_rx_status remote_rx;
};
struct e1000_phy_stats {
uint32_t idle_errors;
uint32_t receive_errors;
};
struct e1000_eeprom_info {
e1000_eeprom_type type;
uint16_t word_size;
uint16_t opcode_bits;
uint16_t address_bits;
uint16_t delay_usec;
uint16_t page_size;
boolean_t use_eerd;
boolean_t use_eewr;
};
/* Flex ASF Information */
#define E1000_HOST_IF_MAX_SIZE 2048
typedef enum {
e1000_byte_align = 0,
e1000_word_align = 1,
e1000_dword_align = 2
} e1000_align_type;
/* Error Codes */
#define E1000_SUCCESS 0
#define E1000_ERR_EEPROM 1
#define E1000_ERR_PHY 2
#define E1000_ERR_CONFIG 3
#define E1000_ERR_PARAM 4
#define E1000_ERR_MAC_TYPE 5
#define E1000_ERR_PHY_TYPE 6
#define E1000_ERR_RESET 9
#define E1000_ERR_MASTER_REQUESTS_PENDING 10
#define E1000_ERR_HOST_INTERFACE_COMMAND 11
#define E1000_BLK_PHY_RESET 12
/* Function prototypes */
/* Initialization */
int32_t e1000_reset_hw(struct e1000_hw *hw);
int32_t e1000_init_hw(struct e1000_hw *hw);
int32_t e1000_set_mac_type(struct e1000_hw *hw);
void e1000_set_media_type(struct e1000_hw *hw);
/* Link Configuration */
int32_t e1000_setup_link(struct e1000_hw *hw);
int32_t e1000_phy_setup_autoneg(struct e1000_hw *hw);
void e1000_config_collision_dist(struct e1000_hw *hw);
int32_t e1000_check_for_link(struct e1000_hw *hw);
int32_t e1000_get_speed_and_duplex(struct e1000_hw *hw, uint16_t * speed, uint16_t * duplex);
int32_t e1000_force_mac_fc(struct e1000_hw *hw);
/* PHY */
int32_t e1000_read_phy_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t *phy_data);
int32_t e1000_write_phy_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t data);
int32_t e1000_phy_hw_reset(struct e1000_hw *hw);
int32_t e1000_phy_reset(struct e1000_hw *hw);
int32_t e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info);
int32_t e1000_validate_mdi_setting(struct e1000_hw *hw);
/* EEPROM Functions */
int32_t e1000_init_eeprom_params(struct e1000_hw *hw);
/* MNG HOST IF functions */
uint32_t e1000_enable_mng_pass_thru(struct e1000_hw *hw);
#define E1000_MNG_DHCP_TX_PAYLOAD_CMD 64
#define E1000_HI_MAX_MNG_DATA_LENGTH 0x6F8 /* Host Interface data length */
#define E1000_MNG_DHCP_COMMAND_TIMEOUT 10 /* Time in ms to process MNG command */
#define E1000_MNG_DHCP_COOKIE_OFFSET 0x6F0 /* Cookie offset */
#define E1000_MNG_DHCP_COOKIE_LENGTH 0x10 /* Cookie length */
#define E1000_MNG_IAMT_MODE 0x3
#define E1000_IAMT_SIGNATURE 0x544D4149 /* Intel(R) Active Management Technology signature */
#define E1000_MNG_DHCP_COOKIE_STATUS_PARSING_SUPPORT 0x1 /* DHCP parsing enabled */
#define E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT 0x2 /* DHCP parsing enabled */
#define E1000_VFTA_ENTRY_SHIFT 0x5
#define E1000_VFTA_ENTRY_MASK 0x7F
#define E1000_VFTA_ENTRY_BIT_SHIFT_MASK 0x1F
struct e1000_host_mng_command_header {
uint8_t command_id;
uint8_t checksum;
uint16_t reserved1;
uint16_t reserved2;
uint16_t command_length;
};
struct e1000_host_mng_command_info {
struct e1000_host_mng_command_header command_header; /* Command Head/Command Result Head has 4 bytes */
uint8_t command_data[E1000_HI_MAX_MNG_DATA_LENGTH]; /* Command data can length 0..0x658*/
};
#ifdef __BIG_ENDIAN
struct e1000_host_mng_dhcp_cookie{
uint32_t signature;
uint16_t vlan_id;
uint8_t reserved0;
uint8_t status;
uint32_t reserved1;
uint8_t checksum;
uint8_t reserved3;
uint16_t reserved2;
};
#else
struct e1000_host_mng_dhcp_cookie{
uint32_t signature;
uint8_t status;
uint8_t reserved0;
uint16_t vlan_id;
uint32_t reserved1;
uint16_t reserved2;
uint8_t reserved3;
uint8_t checksum;
};
#endif
int32_t e1000_mng_write_dhcp_info(struct e1000_hw *hw, uint8_t *buffer,
uint16_t length);
boolean_t e1000_check_mng_mode(struct e1000_hw *hw);
boolean_t e1000_enable_tx_pkt_filtering(struct e1000_hw *hw);
int32_t e1000_read_eeprom(struct e1000_hw *hw, uint16_t reg, uint16_t words, uint16_t *data);
int32_t e1000_validate_eeprom_checksum(struct e1000_hw *hw);
int32_t e1000_update_eeprom_checksum(struct e1000_hw *hw);
int32_t e1000_write_eeprom(struct e1000_hw *hw, uint16_t reg, uint16_t words, uint16_t *data);
int32_t e1000_read_part_num(struct e1000_hw *hw, uint32_t * part_num);
int32_t e1000_read_mac_addr(struct e1000_hw * hw);
int32_t e1000_swfw_sync_acquire(struct e1000_hw *hw, uint16_t mask);
void e1000_swfw_sync_release(struct e1000_hw *hw, uint16_t mask);
/* Filters (multicast, vlan, receive) */
void e1000_mc_addr_list_update(struct e1000_hw *hw, uint8_t * mc_addr_list, uint32_t mc_addr_count, uint32_t pad, uint32_t rar_used_count);
uint32_t e1000_hash_mc_addr(struct e1000_hw *hw, uint8_t * mc_addr);
void e1000_mta_set(struct e1000_hw *hw, uint32_t hash_value);
void e1000_rar_set(struct e1000_hw *hw, uint8_t * mc_addr, uint32_t rar_index);
void e1000_write_vfta(struct e1000_hw *hw, uint32_t offset, uint32_t value);
/* LED functions */
int32_t e1000_setup_led(struct e1000_hw *hw);
int32_t e1000_cleanup_led(struct e1000_hw *hw);
int32_t e1000_led_on(struct e1000_hw *hw);
int32_t e1000_led_off(struct e1000_hw *hw);
/* Adaptive IFS Functions */
/* Everything else */
void e1000_reset_adaptive(struct e1000_hw *hw);
void e1000_update_adaptive(struct e1000_hw *hw);
void e1000_tbi_adjust_stats(struct e1000_hw *hw, struct e1000_hw_stats *stats, uint32_t frame_len, uint8_t * mac_addr);
void e1000_get_bus_info(struct e1000_hw *hw);
void e1000_pci_set_mwi(struct e1000_hw *hw);
void e1000_pci_clear_mwi(struct e1000_hw *hw);
void e1000_read_pci_cfg(struct e1000_hw *hw, uint32_t reg, uint16_t * value);
void e1000_write_pci_cfg(struct e1000_hw *hw, uint32_t reg, uint16_t * value);
/* Port I/O is only supported on 82544 and newer */
uint32_t e1000_io_read(struct e1000_hw *hw, unsigned long port);
uint32_t e1000_read_reg_io(struct e1000_hw *hw, uint32_t offset);
void e1000_io_write(struct e1000_hw *hw, unsigned long port, uint32_t value);
void e1000_enable_pciex_master(struct e1000_hw *hw);
int32_t e1000_disable_pciex_master(struct e1000_hw *hw);
int32_t e1000_get_software_semaphore(struct e1000_hw *hw);
void e1000_release_software_semaphore(struct e1000_hw *hw);
int32_t e1000_check_phy_reset_block(struct e1000_hw *hw);
/* PCI Device IDs */
#define E1000_DEV_ID_82542 0x1000
#define E1000_DEV_ID_82543GC_FIBER 0x1001
#define E1000_DEV_ID_82543GC_COPPER 0x1004
#define E1000_DEV_ID_82544EI_COPPER 0x1008
#define E1000_DEV_ID_82544EI_FIBER 0x1009
#define E1000_DEV_ID_82544GC_COPPER 0x100C
#define E1000_DEV_ID_82544GC_LOM 0x100D
#define E1000_DEV_ID_82540EM 0x100E
#define E1000_DEV_ID_82540EM_LOM 0x1015
#define E1000_DEV_ID_82540EP_LOM 0x1016
#define E1000_DEV_ID_82540EP 0x1017
#define E1000_DEV_ID_82540EP_LP 0x101E
#define E1000_DEV_ID_82545EM_COPPER 0x100F
#define E1000_DEV_ID_82545EM_FIBER 0x1011
#define E1000_DEV_ID_82545GM_COPPER 0x1026
#define E1000_DEV_ID_82545GM_FIBER 0x1027
#define E1000_DEV_ID_82545GM_SERDES 0x1028
#define E1000_DEV_ID_82546EB_COPPER 0x1010
#define E1000_DEV_ID_82546EB_FIBER 0x1012
#define E1000_DEV_ID_82546EB_QUAD_COPPER 0x101D
#define E1000_DEV_ID_82541EI 0x1013
#define E1000_DEV_ID_82541EI_MOBILE 0x1018
#define E1000_DEV_ID_82541ER 0x1078
#define E1000_DEV_ID_82547GI 0x1075
#define E1000_DEV_ID_82541GI 0x1076
#define E1000_DEV_ID_82541GI_MOBILE 0x1077
#define E1000_DEV_ID_82541GI_LF 0x107C
#define E1000_DEV_ID_82546GB_COPPER 0x1079
#define E1000_DEV_ID_82546GB_FIBER 0x107A
#define E1000_DEV_ID_82546GB_SERDES 0x107B
#define E1000_DEV_ID_82546GB_PCIE 0x108A
#define E1000_DEV_ID_82546GB_QUAD_COPPER 0x1099
#define E1000_DEV_ID_82547EI 0x1019
#define E1000_DEV_ID_82571EB_COPPER 0x105E
#define E1000_DEV_ID_82571EB_FIBER 0x105F
#define E1000_DEV_ID_82571EB_SERDES 0x1060
#define E1000_DEV_ID_82572EI_COPPER 0x107D
#define E1000_DEV_ID_82572EI_FIBER 0x107E
#define E1000_DEV_ID_82572EI_SERDES 0x107F
#define E1000_DEV_ID_82573E 0x108B
#define E1000_DEV_ID_82573E_IAMT 0x108C
#define E1000_DEV_ID_82573L 0x109A
#define E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3 0x10B5
#define NODE_ADDRESS_SIZE 6
#define ETH_LENGTH_OF_ADDRESS 6
/* MAC decode size is 128K - This is the size of BAR0 */
#define MAC_DECODE_SIZE (128 * 1024)
#define E1000_82542_2_0_REV_ID 2
#define E1000_82542_2_1_REV_ID 3
#define E1000_REVISION_0 0
#define E1000_REVISION_1 1
#define E1000_REVISION_2 2
#define E1000_REVISION_3 3
#define SPEED_10 10
#define SPEED_100 100
#define SPEED_1000 1000
#define HALF_DUPLEX 1
#define FULL_DUPLEX 2
/* The sizes (in bytes) of a ethernet packet */
#define ENET_HEADER_SIZE 14
#define MAXIMUM_ETHERNET_FRAME_SIZE 1518 /* With FCS */
#define MINIMUM_ETHERNET_FRAME_SIZE 64 /* With FCS */
#define ETHERNET_FCS_SIZE 4
#define MAXIMUM_ETHERNET_PACKET_SIZE \
(MAXIMUM_ETHERNET_FRAME_SIZE - ETHERNET_FCS_SIZE)
#define MINIMUM_ETHERNET_PACKET_SIZE \
(MINIMUM_ETHERNET_FRAME_SIZE - ETHERNET_FCS_SIZE)
#define CRC_LENGTH ETHERNET_FCS_SIZE
#define MAX_JUMBO_FRAME_SIZE 0x3F00
/* 802.1q VLAN Packet Sizes */
#define VLAN_TAG_SIZE 4 /* 802.3ac tag (not DMAed) */
/* Ethertype field values */
#define ETHERNET_IEEE_VLAN_TYPE 0x8100 /* 802.3ac packet */
#define ETHERNET_IP_TYPE 0x0800 /* IP packets */
#define ETHERNET_ARP_TYPE 0x0806 /* Address Resolution Protocol (ARP) */
/* Packet Header defines */
#define IP_PROTOCOL_TCP 6
#define IP_PROTOCOL_UDP 0x11
/* This defines the bits that are set in the Interrupt Mask
* Set/Read Register. Each bit is documented below:
* o RXDMT0 = Receive Descriptor Minimum Threshold hit (ring 0)
* o RXSEQ = Receive Sequence Error
*/
#define POLL_IMS_ENABLE_MASK ( \
E1000_IMS_RXDMT0 | \
E1000_IMS_RXSEQ)
/* This defines the bits that are set in the Interrupt Mask
* Set/Read Register. Each bit is documented below:
* o RXT0 = Receiver Timer Interrupt (ring 0)
* o TXDW = Transmit Descriptor Written Back
* o RXDMT0 = Receive Descriptor Minimum Threshold hit (ring 0)
* o RXSEQ = Receive Sequence Error
* o LSC = Link Status Change
*/
#define IMS_ENABLE_MASK ( \
E1000_IMS_RXT0 | \
E1000_IMS_TXDW | \
E1000_IMS_RXDMT0 | \
E1000_IMS_RXSEQ | \
E1000_IMS_LSC)
/* Number of high/low register pairs in the RAR. The RAR (Receive Address
* Registers) holds the directed and multicast addresses that we monitor. We
* reserve one of these spots for our directed address, allowing us room for
* E1000_RAR_ENTRIES - 1 multicast addresses.
*/
#define E1000_RAR_ENTRIES 15
#define MIN_NUMBER_OF_DESCRIPTORS 8
#define MAX_NUMBER_OF_DESCRIPTORS 0xFFF8
/* Receive Descriptor */
struct e1000_rx_desc {
uint64_t buffer_addr; /* Address of the descriptor's data buffer */
uint16_t length; /* Length of data DMAed into data buffer */
uint16_t csum; /* Packet checksum */
uint8_t status; /* Descriptor status */
uint8_t errors; /* Descriptor Errors */
uint16_t special;
};
/* Receive Descriptor - Extended */
union e1000_rx_desc_extended {
struct {
uint64_t buffer_addr;
uint64_t reserved;
} read;
struct {
struct {
uint32_t mrq; /* Multiple Rx Queues */
union {
uint32_t rss; /* RSS Hash */
struct {
uint16_t ip_id; /* IP id */
uint16_t csum; /* Packet Checksum */
} csum_ip;
} hi_dword;
} lower;
struct {
uint32_t status_error; /* ext status/error */
uint16_t length;
uint16_t vlan; /* VLAN tag */
} upper;
} wb; /* writeback */
};
#define MAX_PS_BUFFERS 4
/* Receive Descriptor - Packet Split */
union e1000_rx_desc_packet_split {
struct {
/* one buffer for protocol header(s), three data buffers */
uint64_t buffer_addr[MAX_PS_BUFFERS];
} read;
struct {
struct {
uint32_t mrq; /* Multiple Rx Queues */
union {
uint32_t rss; /* RSS Hash */
struct {
uint16_t ip_id; /* IP id */
uint16_t csum; /* Packet Checksum */
} csum_ip;
} hi_dword;
} lower;
struct {
uint32_t status_error; /* ext status/error */
uint16_t length0; /* length of buffer 0 */
uint16_t vlan; /* VLAN tag */
} middle;
struct {
uint16_t header_status;
uint16_t length[3]; /* length of buffers 1-3 */
} upper;
uint64_t reserved;
} wb; /* writeback */
};
/* Receive Decriptor bit definitions */
#define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */
#define E1000_RXD_STAT_EOP 0x02 /* End of Packet */
#define E1000_RXD_STAT_IXSM 0x04 /* Ignore checksum */
#define E1000_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */
#define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum caculated */
#define E1000_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */
#define E1000_RXD_STAT_IPCS 0x40 /* IP xsum calculated */
#define E1000_RXD_STAT_PIF 0x80 /* passed in-exact filter */
#define E1000_RXD_STAT_IPIDV 0x200 /* IP identification valid */
#define E1000_RXD_STAT_UDPV 0x400 /* Valid UDP checksum */
#define E1000_RXD_STAT_ACK 0x8000 /* ACK Packet indication */
#define E1000_RXD_ERR_CE 0x01 /* CRC Error */
#define E1000_RXD_ERR_SE 0x02 /* Symbol Error */
#define E1000_RXD_ERR_SEQ 0x04 /* Sequence Error */
#define E1000_RXD_ERR_CXE 0x10 /* Carrier Extension Error */
#define E1000_RXD_ERR_TCPE 0x20 /* TCP/UDP Checksum Error */
#define E1000_RXD_ERR_IPE 0x40 /* IP Checksum Error */
#define E1000_RXD_ERR_RXE 0x80 /* Rx Data Error */
#define E1000_RXD_SPC_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */
#define E1000_RXD_SPC_PRI_MASK 0xE000 /* Priority is in upper 3 bits */
#define E1000_RXD_SPC_PRI_SHIFT 13
#define E1000_RXD_SPC_CFI_MASK 0x1000 /* CFI is bit 12 */
#define E1000_RXD_SPC_CFI_SHIFT 12
#define E1000_RXDEXT_STATERR_CE 0x01000000
#define E1000_RXDEXT_STATERR_SE 0x02000000
#define E1000_RXDEXT_STATERR_SEQ 0x04000000
#define E1000_RXDEXT_STATERR_CXE 0x10000000
#define E1000_RXDEXT_STATERR_TCPE 0x20000000
#define E1000_RXDEXT_STATERR_IPE 0x40000000
#define E1000_RXDEXT_STATERR_RXE 0x80000000
#define E1000_RXDPS_HDRSTAT_HDRSP 0x00008000
#define E1000_RXDPS_HDRSTAT_HDRLEN_MASK 0x000003FF
/* mask to determine if packets should be dropped due to frame errors */
#define E1000_RXD_ERR_FRAME_ERR_MASK ( \
E1000_RXD_ERR_CE | \
E1000_RXD_ERR_SE | \
E1000_RXD_ERR_SEQ | \
E1000_RXD_ERR_CXE | \
E1000_RXD_ERR_RXE)
/* Same mask, but for extended and packet split descriptors */
#define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \
E1000_RXDEXT_STATERR_CE | \
E1000_RXDEXT_STATERR_SE | \
E1000_RXDEXT_STATERR_SEQ | \
E1000_RXDEXT_STATERR_CXE | \
E1000_RXDEXT_STATERR_RXE)
/* Transmit Descriptor */
struct e1000_tx_desc {
uint64_t buffer_addr; /* Address of the descriptor's data buffer */
union {
uint32_t data;
struct {
uint16_t length; /* Data buffer length */
uint8_t cso; /* Checksum offset */
uint8_t cmd; /* Descriptor control */
} flags;
} lower;
union {
uint32_t data;
struct {
uint8_t status; /* Descriptor status */
uint8_t css; /* Checksum start */
uint16_t special;
} fields;
} upper;
};
/* Transmit Descriptor bit definitions */
#define E1000_TXD_DTYP_D 0x00100000 /* Data Descriptor */
#define E1000_TXD_DTYP_C 0x00000000 /* Context Descriptor */
#define E1000_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */
#define E1000_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */
#define E1000_TXD_CMD_EOP 0x01000000 /* End of Packet */
#define E1000_TXD_CMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */
#define E1000_TXD_CMD_IC 0x04000000 /* Insert Checksum */
#define E1000_TXD_CMD_RS 0x08000000 /* Report Status */
#define E1000_TXD_CMD_RPS 0x10000000 /* Report Packet Sent */
#define E1000_TXD_CMD_DEXT 0x20000000 /* Descriptor extension (0 = legacy) */
#define E1000_TXD_CMD_VLE 0x40000000 /* Add VLAN tag */
#define E1000_TXD_CMD_IDE 0x80000000 /* Enable Tidv register */
#define E1000_TXD_STAT_DD 0x00000001 /* Descriptor Done */
#define E1000_TXD_STAT_EC 0x00000002 /* Excess Collisions */
#define E1000_TXD_STAT_LC 0x00000004 /* Late Collisions */
#define E1000_TXD_STAT_TU 0x00000008 /* Transmit underrun */
#define E1000_TXD_CMD_TCP 0x01000000 /* TCP packet */
#define E1000_TXD_CMD_IP 0x02000000 /* IP packet */
#define E1000_TXD_CMD_TSE 0x04000000 /* TCP Seg enable */
#define E1000_TXD_STAT_TC 0x00000004 /* Tx Underrun */
/* Offload Context Descriptor */
struct e1000_context_desc {
union {
uint32_t ip_config;
struct {
uint8_t ipcss; /* IP checksum start */
uint8_t ipcso; /* IP checksum offset */
uint16_t ipcse; /* IP checksum end */
} ip_fields;
} lower_setup;
union {
uint32_t tcp_config;
struct {
uint8_t tucss; /* TCP checksum start */
uint8_t tucso; /* TCP checksum offset */
uint16_t tucse; /* TCP checksum end */
} tcp_fields;
} upper_setup;
uint32_t cmd_and_length; /* */
union {
uint32_t data;
struct {
uint8_t status; /* Descriptor status */
uint8_t hdr_len; /* Header length */
uint16_t mss; /* Maximum segment size */
} fields;
} tcp_seg_setup;
};
/* Offload data descriptor */
struct e1000_data_desc {
uint64_t buffer_addr; /* Address of the descriptor's buffer address */
union {
uint32_t data;
struct {
uint16_t length; /* Data buffer length */
uint8_t typ_len_ext; /* */
uint8_t cmd; /* */
} flags;
} lower;
union {
uint32_t data;
struct {
uint8_t status; /* Descriptor status */
uint8_t popts; /* Packet Options */
uint16_t special; /* */
} fields;
} upper;
};
/* Filters */
#define E1000_NUM_UNICAST 16 /* Unicast filter entries */
#define E1000_MC_TBL_SIZE 128 /* Multicast Filter Table (4096 bits) */
#define E1000_VLAN_FILTER_TBL_SIZE 128 /* VLAN Filter Table (4096 bits) */
/* Receive Address Register */
struct e1000_rar {
volatile uint32_t low; /* receive address low */
volatile uint32_t high; /* receive address high */
};
/* Number of entries in the Multicast Table Array (MTA). */
#define E1000_NUM_MTA_REGISTERS 128
/* IPv4 Address Table Entry */
struct e1000_ipv4_at_entry {
volatile uint32_t ipv4_addr; /* IP Address (RW) */
volatile uint32_t reserved;
};
/* Four wakeup IP addresses are supported */
#define E1000_WAKEUP_IP_ADDRESS_COUNT_MAX 4
#define E1000_IP4AT_SIZE E1000_WAKEUP_IP_ADDRESS_COUNT_MAX
#define E1000_IP6AT_SIZE 1
/* IPv6 Address Table Entry */
struct e1000_ipv6_at_entry {
volatile uint8_t ipv6_addr[16];
};
/* Flexible Filter Length Table Entry */
struct e1000_fflt_entry {
volatile uint32_t length; /* Flexible Filter Length (RW) */
volatile uint32_t reserved;
};
/* Flexible Filter Mask Table Entry */
struct e1000_ffmt_entry {
volatile uint32_t mask; /* Flexible Filter Mask (RW) */
volatile uint32_t reserved;
};
/* Flexible Filter Value Table Entry */
struct e1000_ffvt_entry {
volatile uint32_t value; /* Flexible Filter Value (RW) */
volatile uint32_t reserved;
};
/* Four Flexible Filters are supported */
#define E1000_FLEXIBLE_FILTER_COUNT_MAX 4
/* Each Flexible Filter is at most 128 (0x80) bytes in length */
#define E1000_FLEXIBLE_FILTER_SIZE_MAX 128
#define E1000_FFLT_SIZE E1000_FLEXIBLE_FILTER_COUNT_MAX
#define E1000_FFMT_SIZE E1000_FLEXIBLE_FILTER_SIZE_MAX
#define E1000_FFVT_SIZE E1000_FLEXIBLE_FILTER_SIZE_MAX
#define E1000_DISABLE_SERDES_LOOPBACK 0x0400
/* Register Set. (82543, 82544)
*
* Registers are defined to be 32 bits and should be accessed as 32 bit values.
* These registers are physically located on the NIC, but are mapped into the
* host memory address space.
*
* RW - register is both readable and writable
* RO - register is read only
* WO - register is write only
* R/clr - register is read only and is cleared when read
* A - register array
*/
#define E1000_CTRL 0x00000 /* Device Control - RW */
#define E1000_CTRL_DUP 0x00004 /* Device Control Duplicate (Shadow) - RW */
#define E1000_STATUS 0x00008 /* Device Status - RO */
#define E1000_EECD 0x00010 /* EEPROM/Flash Control - RW */
#define E1000_EERD 0x00014 /* EEPROM Read - RW */
#define E1000_CTRL_EXT 0x00018 /* Extended Device Control - RW */
#define E1000_FLA 0x0001C /* Flash Access - RW */
#define E1000_MDIC 0x00020 /* MDI Control - RW */
#define E1000_SCTL 0x00024 /* SerDes Control - RW */
#define E1000_FCAL 0x00028 /* Flow Control Address Low - RW */
#define E1000_FCAH 0x0002C /* Flow Control Address High -RW */
#define E1000_FCT 0x00030 /* Flow Control Type - RW */
#define E1000_VET 0x00038 /* VLAN Ether Type - RW */
#define E1000_ICR 0x000C0 /* Interrupt Cause Read - R/clr */
#define E1000_ITR 0x000C4 /* Interrupt Throttling Rate - RW */
#define E1000_ICS 0x000C8 /* Interrupt Cause Set - WO */
#define E1000_IMS 0x000D0 /* Interrupt Mask Set - RW */
#define E1000_IMC 0x000D8 /* Interrupt Mask Clear - WO */
#define E1000_IAM 0x000E0 /* Interrupt Acknowledge Auto Mask */
#define E1000_RCTL 0x00100 /* RX Control - RW */
#define E1000_RDTR1 0x02820 /* RX Delay Timer (1) - RW */
#define E1000_RDBAL1 0x02900 /* RX Descriptor Base Address Low (1) - RW */
#define E1000_RDBAH1 0x02904 /* RX Descriptor Base Address High (1) - RW */
#define E1000_RDLEN1 0x02908 /* RX Descriptor Length (1) - RW */
#define E1000_RDH1 0x02910 /* RX Descriptor Head (1) - RW */
#define E1000_RDT1 0x02918 /* RX Descriptor Tail (1) - RW */
#define E1000_FCTTV 0x00170 /* Flow Control Transmit Timer Value - RW */
#define E1000_TXCW 0x00178 /* TX Configuration Word - RW */
#define E1000_RXCW 0x00180 /* RX Configuration Word - RO */
#define E1000_TCTL 0x00400 /* TX Control - RW */
#define E1000_TIPG 0x00410 /* TX Inter-packet gap -RW */
#define E1000_TBT 0x00448 /* TX Burst Timer - RW */
#define E1000_AIT 0x00458 /* Adaptive Interframe Spacing Throttle - RW */
#define E1000_LEDCTL 0x00E00 /* LED Control - RW */
#define E1000_EXTCNF_CTRL 0x00F00 /* Extended Configuration Control */
#define E1000_EXTCNF_SIZE 0x00F08 /* Extended Configuration Size */
#define E1000_PBA 0x01000 /* Packet Buffer Allocation - RW */
#define E1000_PBS 0x01008 /* Packet Buffer Size */
#define E1000_EEMNGCTL 0x01010 /* MNG EEprom Control */
#define E1000_FLASH_UPDATES 1000
#define E1000_EEARBC 0x01024 /* EEPROM Auto Read Bus Control */
#define E1000_FLASHT 0x01028 /* FLASH Timer Register */
#define E1000_EEWR 0x0102C /* EEPROM Write Register - RW */
#define E1000_FLSWCTL 0x01030 /* FLASH control register */
#define E1000_FLSWDATA 0x01034 /* FLASH data register */
#define E1000_FLSWCNT 0x01038 /* FLASH Access Counter */
#define E1000_FLOP 0x0103C /* FLASH Opcode Register */
#define E1000_ERT 0x02008 /* Early Rx Threshold - RW */
#define E1000_FCRTL 0x02160 /* Flow Control Receive Threshold Low - RW */
#define E1000_FCRTH 0x02168 /* Flow Control Receive Threshold High - RW */
#define E1000_PSRCTL 0x02170 /* Packet Split Receive Control - RW */
#define E1000_RDBAL 0x02800 /* RX Descriptor Base Address Low - RW */
#define E1000_RDBAH 0x02804 /* RX Descriptor Base Address High - RW */
#define E1000_RDLEN 0x02808 /* RX Descriptor Length - RW */
#define E1000_RDH 0x02810 /* RX Descriptor Head - RW */
#define E1000_RDT 0x02818 /* RX Descriptor Tail - RW */
#define E1000_RDTR 0x02820 /* RX Delay Timer - RW */
#define E1000_RDBAL0 E1000_RDBAL /* RX Desc Base Address Low (0) - RW */
#define E1000_RDBAH0 E1000_RDBAH /* RX Desc Base Address High (0) - RW */
#define E1000_RDLEN0 E1000_RDLEN /* RX Desc Length (0) - RW */
#define E1000_RDH0 E1000_RDH /* RX Desc Head (0) - RW */
#define E1000_RDT0 E1000_RDT /* RX Desc Tail (0) - RW */
#define E1000_RDTR0 E1000_RDTR /* RX Delay Timer (0) - RW */
#define E1000_RXDCTL 0x02828 /* RX Descriptor Control - RW */
#define E1000_RADV 0x0282C /* RX Interrupt Absolute Delay Timer - RW */
#define E1000_RSRPD 0x02C00 /* RX Small Packet Detect - RW */
#define E1000_RAID 0x02C08 /* Receive Ack Interrupt Delay - RW */
#define E1000_TXDMAC 0x03000 /* TX DMA Control - RW */
#define E1000_TDFH 0x03410 /* TX Data FIFO Head - RW */
#define E1000_TDFT 0x03418 /* TX Data FIFO Tail - RW */
#define E1000_TDFHS 0x03420 /* TX Data FIFO Head Saved - RW */
#define E1000_TDFTS 0x03428 /* TX Data FIFO Tail Saved - RW */
#define E1000_TDFPC 0x03430 /* TX Data FIFO Packet Count - RW */
#define E1000_TDBAL 0x03800 /* TX Descriptor Base Address Low - RW */
#define E1000_TDBAH 0x03804 /* TX Descriptor Base Address High - RW */
#define E1000_TDLEN 0x03808 /* TX Descriptor Length - RW */
#define E1000_TDH 0x03810 /* TX Descriptor Head - RW */
#define E1000_TDT 0x03818 /* TX Descripotr Tail - RW */
#define E1000_TIDV 0x03820 /* TX Interrupt Delay Value - RW */
#define E1000_TXDCTL 0x03828 /* TX Descriptor Control - RW */
#define E1000_TADV 0x0382C /* TX Interrupt Absolute Delay Val - RW */
#define E1000_TSPMT 0x03830 /* TCP Segmentation PAD & Min Threshold - RW */
#define E1000_TARC0 0x03840 /* TX Arbitration Count (0) */
#define E1000_TDBAL1 0x03900 /* TX Desc Base Address Low (1) - RW */
#define E1000_TDBAH1 0x03904 /* TX Desc Base Address High (1) - RW */
#define E1000_TDLEN1 0x03908 /* TX Desc Length (1) - RW */
#define E1000_TDH1 0x03910 /* TX Desc Head (1) - RW */
#define E1000_TDT1 0x03918 /* TX Desc Tail (1) - RW */
#define E1000_TXDCTL1 0x03928 /* TX Descriptor Control (1) - RW */
#define E1000_TARC1 0x03940 /* TX Arbitration Count (1) */
#define E1000_CRCERRS 0x04000 /* CRC Error Count - R/clr */
#define E1000_ALGNERRC 0x04004 /* Alignment Error Count - R/clr */
#define E1000_SYMERRS 0x04008 /* Symbol Error Count - R/clr */
#define E1000_RXERRC 0x0400C /* Receive Error Count - R/clr */
#define E1000_MPC 0x04010 /* Missed Packet Count - R/clr */
#define E1000_SCC 0x04014 /* Single Collision Count - R/clr */
#define E1000_ECOL 0x04018 /* Excessive Collision Count - R/clr */
#define E1000_MCC 0x0401C /* Multiple Collision Count - R/clr */
#define E1000_LATECOL 0x04020 /* Late Collision Count - R/clr */
#define E1000_COLC 0x04028 /* Collision Count - R/clr */
#define E1000_DC 0x04030 /* Defer Count - R/clr */
#define E1000_TNCRS 0x04034 /* TX-No CRS - R/clr */
#define E1000_SEC 0x04038 /* Sequence Error Count - R/clr */
#define E1000_CEXTERR 0x0403C /* Carrier Extension Error Count - R/clr */
#define E1000_RLEC 0x04040 /* Receive Length Error Count - R/clr */
#define E1000_XONRXC 0x04048 /* XON RX Count - R/clr */
#define E1000_XONTXC 0x0404C /* XON TX Count - R/clr */
#define E1000_XOFFRXC 0x04050 /* XOFF RX Count - R/clr */
#define E1000_XOFFTXC 0x04054 /* XOFF TX Count - R/clr */
#define E1000_FCRUC 0x04058 /* Flow Control RX Unsupported Count- R/clr */
#define E1000_PRC64 0x0405C /* Packets RX (64 bytes) - R/clr */
#define E1000_PRC127 0x04060 /* Packets RX (65-127 bytes) - R/clr */
#define E1000_PRC255 0x04064 /* Packets RX (128-255 bytes) - R/clr */
#define E1000_PRC511 0x04068 /* Packets RX (255-511 bytes) - R/clr */
#define E1000_PRC1023 0x0406C /* Packets RX (512-1023 bytes) - R/clr */
#define E1000_PRC1522 0x04070 /* Packets RX (1024-1522 bytes) - R/clr */
#define E1000_GPRC 0x04074 /* Good Packets RX Count - R/clr */
#define E1000_BPRC 0x04078 /* Broadcast Packets RX Count - R/clr */
#define E1000_MPRC 0x0407C /* Multicast Packets RX Count - R/clr */
#define E1000_GPTC 0x04080 /* Good Packets TX Count - R/clr */
#define E1000_GORCL 0x04088 /* Good Octets RX Count Low - R/clr */
#define E1000_GORCH 0x0408C /* Good Octets RX Count High - R/clr */
#define E1000_GOTCL 0x04090 /* Good Octets TX Count Low - R/clr */
#define E1000_GOTCH 0x04094 /* Good Octets TX Count High - R/clr */
#define E1000_RNBC 0x040A0 /* RX No Buffers Count - R/clr */
#define E1000_RUC 0x040A4 /* RX Undersize Count - R/clr */
#define E1000_RFC 0x040A8 /* RX Fragment Count - R/clr */
#define E1000_ROC 0x040AC /* RX Oversize Count - R/clr */
#define E1000_RJC 0x040B0 /* RX Jabber Count - R/clr */
#define E1000_MGTPRC 0x040B4 /* Management Packets RX Count - R/clr */
#define E1000_MGTPDC 0x040B8 /* Management Packets Dropped Count - R/clr */
#define E1000_MGTPTC 0x040BC /* Management Packets TX Count - R/clr */
#define E1000_TORL 0x040C0 /* Total Octets RX Low - R/clr */
#define E1000_TORH 0x040C4 /* Total Octets RX High - R/clr */
#define E1000_TOTL 0x040C8 /* Total Octets TX Low - R/clr */
#define E1000_TOTH 0x040CC /* Total Octets TX High - R/clr */
#define E1000_TPR 0x040D0 /* Total Packets RX - R/clr */
#define E1000_TPT 0x040D4 /* Total Packets TX - R/clr */
#define E1000_PTC64 0x040D8 /* Packets TX (64 bytes) - R/clr */
#define E1000_PTC127 0x040DC /* Packets TX (65-127 bytes) - R/clr */
#define E1000_PTC255 0x040E0 /* Packets TX (128-255 bytes) - R/clr */
#define E1000_PTC511 0x040E4 /* Packets TX (256-511 bytes) - R/clr */
#define E1000_PTC1023 0x040E8 /* Packets TX (512-1023 bytes) - R/clr */
#define E1000_PTC1522 0x040EC /* Packets TX (1024-1522 Bytes) - R/clr */
#define E1000_MPTC 0x040F0 /* Multicast Packets TX Count - R/clr */
#define E1000_BPTC 0x040F4 /* Broadcast Packets TX Count - R/clr */
#define E1000_TSCTC 0x040F8 /* TCP Segmentation Context TX - R/clr */
#define E1000_TSCTFC 0x040FC /* TCP Segmentation Context TX Fail - R/clr */
#define E1000_IAC 0x04100 /* Interrupt Assertion Count */
#define E1000_ICRXPTC 0x04104 /* Interrupt Cause Rx Packet Timer Expire Count */
#define E1000_ICRXATC 0x04108 /* Interrupt Cause Rx Absolute Timer Expire Count */
#define E1000_ICTXPTC 0x0410C /* Interrupt Cause Tx Packet Timer Expire Count */
#define E1000_ICTXATC 0x04110 /* Interrupt Cause Tx Absolute Timer Expire Count */
#define E1000_ICTXQEC 0x04118 /* Interrupt Cause Tx Queue Empty Count */
#define E1000_ICTXQMTC 0x0411C /* Interrupt Cause Tx Queue Minimum Threshold Count */
#define E1000_ICRXDMTC 0x04120 /* Interrupt Cause Rx Descriptor Minimum Threshold Count */
#define E1000_ICRXOC 0x04124 /* Interrupt Cause Receiver Overrun Count */
#define E1000_RXCSUM 0x05000 /* RX Checksum Control - RW */
#define E1000_RFCTL 0x05008 /* Receive Filter Control*/
#define E1000_MTA 0x05200 /* Multicast Table Array - RW Array */
#define E1000_RA 0x05400 /* Receive Address - RW Array */
#define E1000_VFTA 0x05600 /* VLAN Filter Table Array - RW Array */
#define E1000_WUC 0x05800 /* Wakeup Control - RW */
#define E1000_WUFC 0x05808 /* Wakeup Filter Control - RW */
#define E1000_WUS 0x05810 /* Wakeup Status - RO */
#define E1000_MANC 0x05820 /* Management Control - RW */
#define E1000_IPAV 0x05838 /* IP Address Valid - RW */
#define E1000_IP4AT 0x05840 /* IPv4 Address Table - RW Array */
#define E1000_IP6AT 0x05880 /* IPv6 Address Table - RW Array */
#define E1000_WUPL 0x05900 /* Wakeup Packet Length - RW */
#define E1000_WUPM 0x05A00 /* Wakeup Packet Memory - RO A */
#define E1000_FFLT 0x05F00 /* Flexible Filter Length Table - RW Array */
#define E1000_HOST_IF 0x08800 /* Host Interface */
#define E1000_FFMT 0x09000 /* Flexible Filter Mask Table - RW Array */
#define E1000_FFVT 0x09800 /* Flexible Filter Value Table - RW Array */
#define E1000_GCR 0x05B00 /* PCI-Ex Control */
#define E1000_GSCL_1 0x05B10 /* PCI-Ex Statistic Control #1 */
#define E1000_GSCL_2 0x05B14 /* PCI-Ex Statistic Control #2 */
#define E1000_GSCL_3 0x05B18 /* PCI-Ex Statistic Control #3 */
#define E1000_GSCL_4 0x05B1C /* PCI-Ex Statistic Control #4 */
#define E1000_FACTPS 0x05B30 /* Function Active and Power State to MNG */
#define E1000_SWSM 0x05B50 /* SW Semaphore */
#define E1000_FWSM 0x05B54 /* FW Semaphore */
#define E1000_FFLT_DBG 0x05F04 /* Debug Register */
#define E1000_HICR 0x08F00 /* Host Inteface Control */
/* RSS registers */
#define E1000_CPUVEC 0x02C10 /* CPU Vector Register - RW */
#define E1000_MRQC 0x05818 /* Multiple Receive Control - RW */
#define E1000_RETA 0x05C00 /* Redirection Table - RW Array */
#define E1000_RSSRK 0x05C80 /* RSS Random Key - RW Array */
#define E1000_RSSIM 0x05864 /* RSS Interrupt Mask */
#define E1000_RSSIR 0x05868 /* RSS Interrupt Request */
/* Register Set (82542)
*
* Some of the 82542 registers are located at different offsets than they are
* in more current versions of the 8254x. Despite the difference in location,
* the registers function in the same manner.
*/
#define E1000_82542_CTRL E1000_CTRL
#define E1000_82542_CTRL_DUP E1000_CTRL_DUP
#define E1000_82542_STATUS E1000_STATUS
#define E1000_82542_EECD E1000_EECD
#define E1000_82542_EERD E1000_EERD
#define E1000_82542_CTRL_EXT E1000_CTRL_EXT
#define E1000_82542_FLA E1000_FLA
#define E1000_82542_MDIC E1000_MDIC
#define E1000_82542_SCTL E1000_SCTL
#define E1000_82542_FCAL E1000_FCAL
#define E1000_82542_FCAH E1000_FCAH
#define E1000_82542_FCT E1000_FCT
#define E1000_82542_VET E1000_VET
#define E1000_82542_RA 0x00040
#define E1000_82542_ICR E1000_ICR
#define E1000_82542_ITR E1000_ITR
#define E1000_82542_ICS E1000_ICS
#define E1000_82542_IMS E1000_IMS
#define E1000_82542_IMC E1000_IMC
#define E1000_82542_RCTL E1000_RCTL
#define E1000_82542_RDTR 0x00108
#define E1000_82542_RDBAL 0x00110
#define E1000_82542_RDBAH 0x00114
#define E1000_82542_RDLEN 0x00118
#define E1000_82542_RDH 0x00120
#define E1000_82542_RDT 0x00128
#define E1000_82542_RDTR0 E1000_82542_RDTR
#define E1000_82542_RDBAL0 E1000_82542_RDBAL
#define E1000_82542_RDBAH0 E1000_82542_RDBAH
#define E1000_82542_RDLEN0 E1000_82542_RDLEN
#define E1000_82542_RDH0 E1000_82542_RDH
#define E1000_82542_RDT0 E1000_82542_RDT
#define E1000_82542_RDTR1 0x00130
#define E1000_82542_RDBAL1 0x00138
#define E1000_82542_RDBAH1 0x0013C
#define E1000_82542_RDLEN1 0x00140
#define E1000_82542_RDH1 0x00148
#define E1000_82542_RDT1 0x00150
#define E1000_82542_FCRTH 0x00160
#define E1000_82542_FCRTL 0x00168
#define E1000_82542_FCTTV E1000_FCTTV
#define E1000_82542_TXCW E1000_TXCW
#define E1000_82542_RXCW E1000_RXCW
#define E1000_82542_MTA 0x00200
#define E1000_82542_TCTL E1000_TCTL
#define E1000_82542_TIPG E1000_TIPG
#define E1000_82542_TDBAL 0x00420
#define E1000_82542_TDBAH 0x00424
#define E1000_82542_TDLEN 0x00428
#define E1000_82542_TDH 0x00430
#define E1000_82542_TDT 0x00438
#define E1000_82542_TIDV 0x00440
#define E1000_82542_TBT E1000_TBT
#define E1000_82542_AIT E1000_AIT
#define E1000_82542_VFTA 0x00600
#define E1000_82542_LEDCTL E1000_LEDCTL
#define E1000_82542_PBA E1000_PBA
#define E1000_82542_PBS E1000_PBS
#define E1000_82542_EEMNGCTL E1000_EEMNGCTL
#define E1000_82542_EEARBC E1000_EEARBC
#define E1000_82542_FLASHT E1000_FLASHT
#define E1000_82542_EEWR E1000_EEWR
#define E1000_82542_FLSWCTL E1000_FLSWCTL
#define E1000_82542_FLSWDATA E1000_FLSWDATA
#define E1000_82542_FLSWCNT E1000_FLSWCNT
#define E1000_82542_FLOP E1000_FLOP
#define E1000_82542_EXTCNF_CTRL E1000_EXTCNF_CTRL
#define E1000_82542_EXTCNF_SIZE E1000_EXTCNF_SIZE
#define E1000_82542_ERT E1000_ERT
#define E1000_82542_RXDCTL E1000_RXDCTL
#define E1000_82542_RADV E1000_RADV
#define E1000_82542_RSRPD E1000_RSRPD
#define E1000_82542_TXDMAC E1000_TXDMAC
#define E1000_82542_TDFHS E1000_TDFHS
#define E1000_82542_TDFTS E1000_TDFTS
#define E1000_82542_TDFPC E1000_TDFPC
#define E1000_82542_TXDCTL E1000_TXDCTL
#define E1000_82542_TADV E1000_TADV
#define E1000_82542_TSPMT E1000_TSPMT
#define E1000_82542_CRCERRS E1000_CRCERRS
#define E1000_82542_ALGNERRC E1000_ALGNERRC
#define E1000_82542_SYMERRS E1000_SYMERRS
#define E1000_82542_RXERRC E1000_RXERRC
#define E1000_82542_MPC E1000_MPC
#define E1000_82542_SCC E1000_SCC
#define E1000_82542_ECOL E1000_ECOL
#define E1000_82542_MCC E1000_MCC
#define E1000_82542_LATECOL E1000_LATECOL
#define E1000_82542_COLC E1000_COLC
#define E1000_82542_DC E1000_DC
#define E1000_82542_TNCRS E1000_TNCRS
#define E1000_82542_SEC E1000_SEC
#define E1000_82542_CEXTERR E1000_CEXTERR
#define E1000_82542_RLEC E1000_RLEC
#define E1000_82542_XONRXC E1000_XONRXC
#define E1000_82542_XONTXC E1000_XONTXC
#define E1000_82542_XOFFRXC E1000_XOFFRXC
#define E1000_82542_XOFFTXC E1000_XOFFTXC
#define E1000_82542_FCRUC E1000_FCRUC
#define E1000_82542_PRC64 E1000_PRC64
#define E1000_82542_PRC127 E1000_PRC127
#define E1000_82542_PRC255 E1000_PRC255
#define E1000_82542_PRC511 E1000_PRC511
#define E1000_82542_PRC1023 E1000_PRC1023
#define E1000_82542_PRC1522 E1000_PRC1522
#define E1000_82542_GPRC E1000_GPRC
#define E1000_82542_BPRC E1000_BPRC
#define E1000_82542_MPRC E1000_MPRC
#define E1000_82542_GPTC E1000_GPTC
#define E1000_82542_GORCL E1000_GORCL
#define E1000_82542_GORCH E1000_GORCH
#define E1000_82542_GOTCL E1000_GOTCL
#define E1000_82542_GOTCH E1000_GOTCH
#define E1000_82542_RNBC E1000_RNBC
#define E1000_82542_RUC E1000_RUC
#define E1000_82542_RFC E1000_RFC
#define E1000_82542_ROC E1000_ROC
#define E1000_82542_RJC E1000_RJC
#define E1000_82542_MGTPRC E1000_MGTPRC
#define E1000_82542_MGTPDC E1000_MGTPDC
#define E1000_82542_MGTPTC E1000_MGTPTC
#define E1000_82542_TORL E1000_TORL
#define E1000_82542_TORH E1000_TORH
#define E1000_82542_TOTL E1000_TOTL
#define E1000_82542_TOTH E1000_TOTH
#define E1000_82542_TPR E1000_TPR
#define E1000_82542_TPT E1000_TPT
#define E1000_82542_PTC64 E1000_PTC64
#define E1000_82542_PTC127 E1000_PTC127
#define E1000_82542_PTC255 E1000_PTC255
#define E1000_82542_PTC511 E1000_PTC511
#define E1000_82542_PTC1023 E1000_PTC1023
#define E1000_82542_PTC1522 E1000_PTC1522
#define E1000_82542_MPTC E1000_MPTC
#define E1000_82542_BPTC E1000_BPTC
#define E1000_82542_TSCTC E1000_TSCTC
#define E1000_82542_TSCTFC E1000_TSCTFC
#define E1000_82542_RXCSUM E1000_RXCSUM
#define E1000_82542_WUC E1000_WUC
#define E1000_82542_WUFC E1000_WUFC
#define E1000_82542_WUS E1000_WUS
#define E1000_82542_MANC E1000_MANC
#define E1000_82542_IPAV E1000_IPAV
#define E1000_82542_IP4AT E1000_IP4AT
#define E1000_82542_IP6AT E1000_IP6AT
#define E1000_82542_WUPL E1000_WUPL
#define E1000_82542_WUPM E1000_WUPM
#define E1000_82542_FFLT E1000_FFLT
#define E1000_82542_TDFH 0x08010
#define E1000_82542_TDFT 0x08018
#define E1000_82542_FFMT E1000_FFMT
#define E1000_82542_FFVT E1000_FFVT
#define E1000_82542_HOST_IF E1000_HOST_IF
#define E1000_82542_IAM E1000_IAM
#define E1000_82542_EEMNGCTL E1000_EEMNGCTL
#define E1000_82542_PSRCTL E1000_PSRCTL
#define E1000_82542_RAID E1000_RAID
#define E1000_82542_TARC0 E1000_TARC0
#define E1000_82542_TDBAL1 E1000_TDBAL1
#define E1000_82542_TDBAH1 E1000_TDBAH1
#define E1000_82542_TDLEN1 E1000_TDLEN1
#define E1000_82542_TDH1 E1000_TDH1
#define E1000_82542_TDT1 E1000_TDT1
#define E1000_82542_TXDCTL1 E1000_TXDCTL1
#define E1000_82542_TARC1 E1000_TARC1
#define E1000_82542_RFCTL E1000_RFCTL
#define E1000_82542_GCR E1000_GCR
#define E1000_82542_GSCL_1 E1000_GSCL_1
#define E1000_82542_GSCL_2 E1000_GSCL_2
#define E1000_82542_GSCL_3 E1000_GSCL_3
#define E1000_82542_GSCL_4 E1000_GSCL_4
#define E1000_82542_FACTPS E1000_FACTPS
#define E1000_82542_SWSM E1000_SWSM
#define E1000_82542_FWSM E1000_FWSM
#define E1000_82542_FFLT_DBG E1000_FFLT_DBG
#define E1000_82542_IAC E1000_IAC
#define E1000_82542_ICRXPTC E1000_ICRXPTC
#define E1000_82542_ICRXATC E1000_ICRXATC
#define E1000_82542_ICTXPTC E1000_ICTXPTC
#define E1000_82542_ICTXATC E1000_ICTXATC
#define E1000_82542_ICTXQEC E1000_ICTXQEC
#define E1000_82542_ICTXQMTC E1000_ICTXQMTC
#define E1000_82542_ICRXDMTC E1000_ICRXDMTC
#define E1000_82542_ICRXOC E1000_ICRXOC
#define E1000_82542_HICR E1000_HICR
#define E1000_82542_CPUVEC E1000_CPUVEC
#define E1000_82542_MRQC E1000_MRQC
#define E1000_82542_RETA E1000_RETA
#define E1000_82542_RSSRK E1000_RSSRK
#define E1000_82542_RSSIM E1000_RSSIM
#define E1000_82542_RSSIR E1000_RSSIR
/* Statistics counters collected by the MAC */
struct e1000_hw_stats {
uint64_t crcerrs;
uint64_t algnerrc;
uint64_t symerrs;
uint64_t rxerrc;
uint64_t mpc;
uint64_t scc;
uint64_t ecol;
uint64_t mcc;
uint64_t latecol;
uint64_t colc;
uint64_t dc;
uint64_t tncrs;
uint64_t sec;
uint64_t cexterr;
uint64_t rlec;
uint64_t xonrxc;
uint64_t xontxc;
uint64_t xoffrxc;
uint64_t xofftxc;
uint64_t fcruc;
uint64_t prc64;
uint64_t prc127;
uint64_t prc255;
uint64_t prc511;
uint64_t prc1023;
uint64_t prc1522;
uint64_t gprc;
uint64_t bprc;
uint64_t mprc;
uint64_t gptc;
uint64_t gorcl;
uint64_t gorch;
uint64_t gotcl;
uint64_t gotch;
uint64_t rnbc;
uint64_t ruc;
uint64_t rfc;
uint64_t roc;
uint64_t rjc;
uint64_t mgprc;
uint64_t mgpdc;
uint64_t mgptc;
uint64_t torl;
uint64_t torh;
uint64_t totl;
uint64_t toth;
uint64_t tpr;
uint64_t tpt;
uint64_t ptc64;
uint64_t ptc127;
uint64_t ptc255;
uint64_t ptc511;
uint64_t ptc1023;
uint64_t ptc1522;
uint64_t mptc;
uint64_t bptc;
uint64_t tsctc;
uint64_t tsctfc;
uint64_t iac;
uint64_t icrxptc;
uint64_t icrxatc;
uint64_t ictxptc;
uint64_t ictxatc;
uint64_t ictxqec;
uint64_t ictxqmtc;
uint64_t icrxdmtc;
uint64_t icrxoc;
};
/* Structure containing variables used by the shared code (e1000_hw.c) */
struct e1000_hw {
uint8_t __iomem *hw_addr;
uint8_t *flash_address;
e1000_mac_type mac_type;
e1000_phy_type phy_type;
uint32_t phy_init_script;
e1000_media_type media_type;
void *back;
e1000_fc_type fc;
e1000_bus_speed bus_speed;
e1000_bus_width bus_width;
e1000_bus_type bus_type;
struct e1000_eeprom_info eeprom;
e1000_ms_type master_slave;
e1000_ms_type original_master_slave;
e1000_ffe_config ffe_config_state;
uint32_t asf_firmware_present;
uint32_t eeprom_semaphore_present;
unsigned long io_base;
uint32_t phy_id;
uint32_t phy_revision;
uint32_t phy_addr;
uint32_t original_fc;
uint32_t txcw;
uint32_t autoneg_failed;
uint32_t max_frame_size;
uint32_t min_frame_size;
uint32_t mc_filter_type;
uint32_t num_mc_addrs;
uint32_t collision_delta;
uint32_t tx_packet_delta;
uint32_t ledctl_default;
uint32_t ledctl_mode1;
uint32_t ledctl_mode2;
boolean_t tx_pkt_filtering;
struct e1000_host_mng_dhcp_cookie mng_cookie;
uint16_t phy_spd_default;
uint16_t autoneg_advertised;
uint16_t pci_cmd_word;
uint16_t fc_high_water;
uint16_t fc_low_water;
uint16_t fc_pause_time;
uint16_t current_ifs_val;
uint16_t ifs_min_val;
uint16_t ifs_max_val;
uint16_t ifs_step_size;
uint16_t ifs_ratio;
uint16_t device_id;
uint16_t vendor_id;
uint16_t subsystem_id;
uint16_t subsystem_vendor_id;
uint8_t revision_id;
uint8_t autoneg;
uint8_t mdix;
uint8_t forced_speed_duplex;
uint8_t wait_autoneg_complete;
uint8_t dma_fairness;
uint8_t mac_addr[NODE_ADDRESS_SIZE];
uint8_t perm_mac_addr[NODE_ADDRESS_SIZE];
boolean_t disable_polarity_correction;
boolean_t speed_downgraded;
e1000_smart_speed smart_speed;
e1000_dsp_config dsp_config_state;
boolean_t get_link_status;
boolean_t serdes_link_down;
boolean_t tbi_compatibility_en;
boolean_t tbi_compatibility_on;
boolean_t laa_is_present;
boolean_t phy_reset_disable;
boolean_t fc_send_xon;
boolean_t fc_strict_ieee;
boolean_t report_tx_early;
boolean_t adaptive_ifs;
boolean_t ifs_params_forced;
boolean_t in_ifs_mode;
boolean_t mng_reg_access_disabled;
boolean_t leave_av_bit_off;
};
#define E1000_EEPROM_SWDPIN0 0x0001 /* SWDPIN 0 EEPROM Value */
#define E1000_EEPROM_LED_LOGIC 0x0020 /* Led Logic Word */
#define E1000_EEPROM_RW_REG_DATA 16 /* Offset to data in EEPROM read/write registers */
#define E1000_EEPROM_RW_REG_DONE 2 /* Offset to READ/WRITE done bit */
#define E1000_EEPROM_RW_REG_START 1 /* First bit for telling part to start operation */
#define E1000_EEPROM_RW_ADDR_SHIFT 2 /* Shift to the address bits */
#define E1000_EEPROM_POLL_WRITE 1 /* Flag for polling for write complete */
#define E1000_EEPROM_POLL_READ 0 /* Flag for polling for read complete */
/* Register Bit Masks */
/* Device Control */
#define E1000_CTRL_FD 0x00000001 /* Full duplex.0=half; 1=full */
#define E1000_CTRL_BEM 0x00000002 /* Endian Mode.0=little,1=big */
#define E1000_CTRL_PRIOR 0x00000004 /* Priority on PCI. 0=rx,1=fair */
#define E1000_CTRL_GIO_MASTER_DISABLE 0x00000004 /*Blocks new Master requests */
#define E1000_CTRL_LRST 0x00000008 /* Link reset. 0=normal,1=reset */
#define E1000_CTRL_TME 0x00000010 /* Test mode. 0=normal,1=test */
#define E1000_CTRL_SLE 0x00000020 /* Serial Link on 0=dis,1=en */
#define E1000_CTRL_ASDE 0x00000020 /* Auto-speed detect enable */
#define E1000_CTRL_SLU 0x00000040 /* Set link up (Force Link) */
#define E1000_CTRL_ILOS 0x00000080 /* Invert Loss-Of Signal */
#define E1000_CTRL_SPD_SEL 0x00000300 /* Speed Select Mask */
#define E1000_CTRL_SPD_10 0x00000000 /* Force 10Mb */
#define E1000_CTRL_SPD_100 0x00000100 /* Force 100Mb */
#define E1000_CTRL_SPD_1000 0x00000200 /* Force 1Gb */
#define E1000_CTRL_BEM32 0x00000400 /* Big Endian 32 mode */
#define E1000_CTRL_FRCSPD 0x00000800 /* Force Speed */
#define E1000_CTRL_FRCDPX 0x00001000 /* Force Duplex */
#define E1000_CTRL_D_UD_EN 0x00002000 /* Dock/Undock enable */
#define E1000_CTRL_D_UD_POLARITY 0x00004000 /* Defined polarity of Dock/Undock indication in SDP[0] */
#define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */
#define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */
#define E1000_CTRL_SWDPIN2 0x00100000 /* SWDPIN 2 value */
#define E1000_CTRL_SWDPIN3 0x00200000 /* SWDPIN 3 value */
#define E1000_CTRL_SWDPIO0 0x00400000 /* SWDPIN 0 Input or output */
#define E1000_CTRL_SWDPIO1 0x00800000 /* SWDPIN 1 input or output */
#define E1000_CTRL_SWDPIO2 0x01000000 /* SWDPIN 2 input or output */
#define E1000_CTRL_SWDPIO3 0x02000000 /* SWDPIN 3 input or output */
#define E1000_CTRL_RST 0x04000000 /* Global reset */
#define E1000_CTRL_RFCE 0x08000000 /* Receive Flow Control enable */
#define E1000_CTRL_TFCE 0x10000000 /* Transmit flow control enable */
#define E1000_CTRL_RTE 0x20000000 /* Routing tag enable */
#define E1000_CTRL_VME 0x40000000 /* IEEE VLAN mode enable */
#define E1000_CTRL_PHY_RST 0x80000000 /* PHY Reset */
/* Device Status */
#define E1000_STATUS_FD 0x00000001 /* Full duplex.0=half,1=full */
#define E1000_STATUS_LU 0x00000002 /* Link up.0=no,1=link */
#define E1000_STATUS_FUNC_MASK 0x0000000C /* PCI Function Mask */
#define E1000_STATUS_FUNC_SHIFT 2
#define E1000_STATUS_FUNC_0 0x00000000 /* Function 0 */
#define E1000_STATUS_FUNC_1 0x00000004 /* Function 1 */
#define E1000_STATUS_TXOFF 0x00000010 /* transmission paused */
#define E1000_STATUS_TBIMODE 0x00000020 /* TBI mode */
#define E1000_STATUS_SPEED_MASK 0x000000C0
#define E1000_STATUS_SPEED_10 0x00000000 /* Speed 10Mb/s */
#define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */
#define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */
#define E1000_STATUS_ASDV 0x00000300 /* Auto speed detect value */
#define E1000_STATUS_DOCK_CI 0x00000800 /* Change in Dock/Undock state. Clear on write '0'. */
#define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Status of Master requests. */
#define E1000_STATUS_MTXCKOK 0x00000400 /* MTX clock running OK */
#define E1000_STATUS_PCI66 0x00000800 /* In 66Mhz slot */
#define E1000_STATUS_BUS64 0x00001000 /* In 64 bit slot */
#define E1000_STATUS_PCIX_MODE 0x00002000 /* PCI-X mode */
#define E1000_STATUS_PCIX_SPEED 0x0000C000 /* PCI-X bus speed */
/* Constants used to intrepret the masked PCI-X bus speed. */
#define E1000_STATUS_PCIX_SPEED_66 0x00000000 /* PCI-X bus speed 50-66 MHz */
#define E1000_STATUS_PCIX_SPEED_100 0x00004000 /* PCI-X bus speed 66-100 MHz */
#define E1000_STATUS_PCIX_SPEED_133 0x00008000 /* PCI-X bus speed 100-133 MHz */
/* EEPROM/Flash Control */
#define E1000_EECD_SK 0x00000001 /* EEPROM Clock */
#define E1000_EECD_CS 0x00000002 /* EEPROM Chip Select */
#define E1000_EECD_DI 0x00000004 /* EEPROM Data In */
#define E1000_EECD_DO 0x00000008 /* EEPROM Data Out */
#define E1000_EECD_FWE_MASK 0x00000030
#define E1000_EECD_FWE_DIS 0x00000010 /* Disable FLASH writes */
#define E1000_EECD_FWE_EN 0x00000020 /* Enable FLASH writes */
#define E1000_EECD_FWE_SHIFT 4
#define E1000_EECD_REQ 0x00000040 /* EEPROM Access Request */
#define E1000_EECD_GNT 0x00000080 /* EEPROM Access Grant */
#define E1000_EECD_PRES 0x00000100 /* EEPROM Present */
#define E1000_EECD_SIZE 0x00000200 /* EEPROM Size (0=64 word 1=256 word) */
#define E1000_EECD_ADDR_BITS 0x00000400 /* EEPROM Addressing bits based on type
* (0-small, 1-large) */
#define E1000_EECD_TYPE 0x00002000 /* EEPROM Type (1-SPI, 0-Microwire) */
#ifndef E1000_EEPROM_GRANT_ATTEMPTS
#define E1000_EEPROM_GRANT_ATTEMPTS 1000 /* EEPROM # attempts to gain grant */
#endif
#define E1000_EECD_AUTO_RD 0x00000200 /* EEPROM Auto Read done */
#define E1000_EECD_SIZE_EX_MASK 0x00007800 /* EEprom Size */
#define E1000_EECD_SIZE_EX_SHIFT 11
#define E1000_EECD_NVADDS 0x00018000 /* NVM Address Size */
#define E1000_EECD_SELSHAD 0x00020000 /* Select Shadow RAM */
#define E1000_EECD_INITSRAM 0x00040000 /* Initialize Shadow RAM */
#define E1000_EECD_FLUPD 0x00080000 /* Update FLASH */
#define E1000_EECD_AUPDEN 0x00100000 /* Enable Autonomous FLASH update */
#define E1000_EECD_SHADV 0x00200000 /* Shadow RAM Data Valid */
#define E1000_EECD_SEC1VAL 0x00400000 /* Sector One Valid */
#define E1000_EECD_SECVAL_SHIFT 22
#define E1000_STM_OPCODE 0xDB00
#define E1000_HICR_FW_RESET 0xC0
/* EEPROM Read */
#define E1000_EERD_START 0x00000001 /* Start Read */
#define E1000_EERD_DONE 0x00000010 /* Read Done */
#define E1000_EERD_ADDR_SHIFT 8
#define E1000_EERD_ADDR_MASK 0x0000FF00 /* Read Address */
#define E1000_EERD_DATA_SHIFT 16
#define E1000_EERD_DATA_MASK 0xFFFF0000 /* Read Data */
/* SPI EEPROM Status Register */
#define EEPROM_STATUS_RDY_SPI 0x01
#define EEPROM_STATUS_WEN_SPI 0x02
#define EEPROM_STATUS_BP0_SPI 0x04
#define EEPROM_STATUS_BP1_SPI 0x08
#define EEPROM_STATUS_WPEN_SPI 0x80
/* Extended Device Control */
#define E1000_CTRL_EXT_GPI0_EN 0x00000001 /* Maps SDP4 to GPI0 */
#define E1000_CTRL_EXT_GPI1_EN 0x00000002 /* Maps SDP5 to GPI1 */
#define E1000_CTRL_EXT_PHYINT_EN E1000_CTRL_EXT_GPI1_EN
#define E1000_CTRL_EXT_GPI2_EN 0x00000004 /* Maps SDP6 to GPI2 */
#define E1000_CTRL_EXT_GPI3_EN 0x00000008 /* Maps SDP7 to GPI3 */
#define E1000_CTRL_EXT_SDP4_DATA 0x00000010 /* Value of SW Defineable Pin 4 */
#define E1000_CTRL_EXT_SDP5_DATA 0x00000020 /* Value of SW Defineable Pin 5 */
#define E1000_CTRL_EXT_PHY_INT E1000_CTRL_EXT_SDP5_DATA
#define E1000_CTRL_EXT_SDP6_DATA 0x00000040 /* Value of SW Defineable Pin 6 */
#define E1000_CTRL_EXT_SDP7_DATA 0x00000080 /* Value of SW Defineable Pin 7 */
#define E1000_CTRL_EXT_SDP4_DIR 0x00000100 /* Direction of SDP4 0=in 1=out */
#define E1000_CTRL_EXT_SDP5_DIR 0x00000200 /* Direction of SDP5 0=in 1=out */
#define E1000_CTRL_EXT_SDP6_DIR 0x00000400 /* Direction of SDP6 0=in 1=out */
#define E1000_CTRL_EXT_SDP7_DIR 0x00000800 /* Direction of SDP7 0=in 1=out */
#define E1000_CTRL_EXT_ASDCHK 0x00001000 /* Initiate an ASD sequence */
#define E1000_CTRL_EXT_EE_RST 0x00002000 /* Reinitialize from EEPROM */
#define E1000_CTRL_EXT_IPS 0x00004000 /* Invert Power State */
#define E1000_CTRL_EXT_SPD_BYPS 0x00008000 /* Speed Select Bypass */
#define E1000_CTRL_EXT_RO_DIS 0x00020000 /* Relaxed Ordering disable */
#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000
#define E1000_CTRL_EXT_LINK_MODE_GMII 0x00000000
#define E1000_CTRL_EXT_LINK_MODE_TBI 0x00C00000
#define E1000_CTRL_EXT_WR_WMARK_MASK 0x03000000
#define E1000_CTRL_EXT_WR_WMARK_256 0x00000000
#define E1000_CTRL_EXT_WR_WMARK_320 0x01000000
#define E1000_CTRL_EXT_WR_WMARK_384 0x02000000
#define E1000_CTRL_EXT_WR_WMARK_448 0x03000000
#define E1000_CTRL_EXT_CANC 0x04000000 /* Interrupt delay cancellation */
#define E1000_CTRL_EXT_DRV_LOAD 0x10000000 /* Driver loaded bit for FW */
#define E1000_CTRL_EXT_IAME 0x08000000 /* Interrupt acknowledge Auto-mask */
#define E1000_CTRL_EXT_INT_TIMER_CLR 0x20000000 /* Clear Interrupt timers after IMS clear */
/* MDI Control */
#define E1000_MDIC_DATA_MASK 0x0000FFFF
#define E1000_MDIC_REG_MASK 0x001F0000
#define E1000_MDIC_REG_SHIFT 16
#define E1000_MDIC_PHY_MASK 0x03E00000
#define E1000_MDIC_PHY_SHIFT 21
#define E1000_MDIC_OP_WRITE 0x04000000
#define E1000_MDIC_OP_READ 0x08000000
#define E1000_MDIC_READY 0x10000000
#define E1000_MDIC_INT_EN 0x20000000
#define E1000_MDIC_ERROR 0x40000000
/* LED Control */
#define E1000_LEDCTL_LED0_MODE_MASK 0x0000000F
#define E1000_LEDCTL_LED0_MODE_SHIFT 0
#define E1000_LEDCTL_LED0_BLINK_RATE 0x0000020
#define E1000_LEDCTL_LED0_IVRT 0x00000040
#define E1000_LEDCTL_LED0_BLINK 0x00000080
#define E1000_LEDCTL_LED1_MODE_MASK 0x00000F00
#define E1000_LEDCTL_LED1_MODE_SHIFT 8
#define E1000_LEDCTL_LED1_BLINK_RATE 0x0002000
#define E1000_LEDCTL_LED1_IVRT 0x00004000
#define E1000_LEDCTL_LED1_BLINK 0x00008000
#define E1000_LEDCTL_LED2_MODE_MASK 0x000F0000
#define E1000_LEDCTL_LED2_MODE_SHIFT 16
#define E1000_LEDCTL_LED2_BLINK_RATE 0x00200000
#define E1000_LEDCTL_LED2_IVRT 0x00400000
#define E1000_LEDCTL_LED2_BLINK 0x00800000
#define E1000_LEDCTL_LED3_MODE_MASK 0x0F000000
#define E1000_LEDCTL_LED3_MODE_SHIFT 24
#define E1000_LEDCTL_LED3_BLINK_RATE 0x20000000
#define E1000_LEDCTL_LED3_IVRT 0x40000000
#define E1000_LEDCTL_LED3_BLINK 0x80000000
#define E1000_LEDCTL_MODE_LINK_10_1000 0x0
#define E1000_LEDCTL_MODE_LINK_100_1000 0x1
#define E1000_LEDCTL_MODE_LINK_UP 0x2
#define E1000_LEDCTL_MODE_ACTIVITY 0x3
#define E1000_LEDCTL_MODE_LINK_ACTIVITY 0x4
#define E1000_LEDCTL_MODE_LINK_10 0x5
#define E1000_LEDCTL_MODE_LINK_100 0x6
#define E1000_LEDCTL_MODE_LINK_1000 0x7
#define E1000_LEDCTL_MODE_PCIX_MODE 0x8
#define E1000_LEDCTL_MODE_FULL_DUPLEX 0x9
#define E1000_LEDCTL_MODE_COLLISION 0xA
#define E1000_LEDCTL_MODE_BUS_SPEED 0xB
#define E1000_LEDCTL_MODE_BUS_SIZE 0xC
#define E1000_LEDCTL_MODE_PAUSED 0xD
#define E1000_LEDCTL_MODE_LED_ON 0xE
#define E1000_LEDCTL_MODE_LED_OFF 0xF
/* Receive Address */
#define E1000_RAH_AV 0x80000000 /* Receive descriptor valid */
/* Interrupt Cause Read */
#define E1000_ICR_TXDW 0x00000001 /* Transmit desc written back */
#define E1000_ICR_TXQE 0x00000002 /* Transmit Queue empty */
#define E1000_ICR_LSC 0x00000004 /* Link Status Change */
#define E1000_ICR_RXSEQ 0x00000008 /* rx sequence error */
#define E1000_ICR_RXDMT0 0x00000010 /* rx desc min. threshold (0) */
#define E1000_ICR_RXO 0x00000040 /* rx overrun */
#define E1000_ICR_RXT0 0x00000080 /* rx timer intr (ring 0) */
#define E1000_ICR_MDAC 0x00000200 /* MDIO access complete */
#define E1000_ICR_RXCFG 0x00000400 /* RX /c/ ordered set */
#define E1000_ICR_GPI_EN0 0x00000800 /* GP Int 0 */
#define E1000_ICR_GPI_EN1 0x00001000 /* GP Int 1 */
#define E1000_ICR_GPI_EN2 0x00002000 /* GP Int 2 */
#define E1000_ICR_GPI_EN3 0x00004000 /* GP Int 3 */
#define E1000_ICR_TXD_LOW 0x00008000
#define E1000_ICR_SRPD 0x00010000
#define E1000_ICR_ACK 0x00020000 /* Receive Ack frame */
#define E1000_ICR_MNG 0x00040000 /* Manageability event */
#define E1000_ICR_DOCK 0x00080000 /* Dock/Undock */
#define E1000_ICR_INT_ASSERTED 0x80000000 /* If this bit asserted, the driver should claim the interrupt */
/* Interrupt Cause Set */
#define E1000_ICS_TXDW E1000_ICR_TXDW /* Transmit desc written back */
#define E1000_ICS_TXQE E1000_ICR_TXQE /* Transmit Queue empty */
#define E1000_ICS_LSC E1000_ICR_LSC /* Link Status Change */
#define E1000_ICS_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */
#define E1000_ICS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */
#define E1000_ICS_RXO E1000_ICR_RXO /* rx overrun */
#define E1000_ICS_RXT0 E1000_ICR_RXT0 /* rx timer intr */
#define E1000_ICS_MDAC E1000_ICR_MDAC /* MDIO access complete */
#define E1000_ICS_RXCFG E1000_ICR_RXCFG /* RX /c/ ordered set */
#define E1000_ICS_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */
#define E1000_ICS_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */
#define E1000_ICS_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */
#define E1000_ICS_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */
#define E1000_ICS_TXD_LOW E1000_ICR_TXD_LOW
#define E1000_ICS_SRPD E1000_ICR_SRPD
#define E1000_ICS_ACK E1000_ICR_ACK /* Receive Ack frame */
#define E1000_ICS_MNG E1000_ICR_MNG /* Manageability event */
#define E1000_ICS_DOCK E1000_ICR_DOCK /* Dock/Undock */
/* Interrupt Mask Set */
#define E1000_IMS_TXDW E1000_ICR_TXDW /* Transmit desc written back */
#define E1000_IMS_TXQE E1000_ICR_TXQE /* Transmit Queue empty */
#define E1000_IMS_LSC E1000_ICR_LSC /* Link Status Change */
#define E1000_IMS_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */
#define E1000_IMS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */
#define E1000_IMS_RXO E1000_ICR_RXO /* rx overrun */
#define E1000_IMS_RXT0 E1000_ICR_RXT0 /* rx timer intr */
#define E1000_IMS_MDAC E1000_ICR_MDAC /* MDIO access complete */
#define E1000_IMS_RXCFG E1000_ICR_RXCFG /* RX /c/ ordered set */
#define E1000_IMS_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */
#define E1000_IMS_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */
#define E1000_IMS_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */
#define E1000_IMS_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */
#define E1000_IMS_TXD_LOW E1000_ICR_TXD_LOW
#define E1000_IMS_SRPD E1000_ICR_SRPD
#define E1000_IMS_ACK E1000_ICR_ACK /* Receive Ack frame */
#define E1000_IMS_MNG E1000_ICR_MNG /* Manageability event */
#define E1000_IMS_DOCK E1000_ICR_DOCK /* Dock/Undock */
/* Interrupt Mask Clear */
#define E1000_IMC_TXDW E1000_ICR_TXDW /* Transmit desc written back */
#define E1000_IMC_TXQE E1000_ICR_TXQE /* Transmit Queue empty */
#define E1000_IMC_LSC E1000_ICR_LSC /* Link Status Change */
#define E1000_IMC_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */
#define E1000_IMC_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */
#define E1000_IMC_RXO E1000_ICR_RXO /* rx overrun */
#define E1000_IMC_RXT0 E1000_ICR_RXT0 /* rx timer intr */
#define E1000_IMC_MDAC E1000_ICR_MDAC /* MDIO access complete */
#define E1000_IMC_RXCFG E1000_ICR_RXCFG /* RX /c/ ordered set */
#define E1000_IMC_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */
#define E1000_IMC_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */
#define E1000_IMC_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */
#define E1000_IMC_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */
#define E1000_IMC_TXD_LOW E1000_ICR_TXD_LOW
#define E1000_IMC_SRPD E1000_ICR_SRPD
#define E1000_IMC_ACK E1000_ICR_ACK /* Receive Ack frame */
#define E1000_IMC_MNG E1000_ICR_MNG /* Manageability event */
#define E1000_IMC_DOCK E1000_ICR_DOCK /* Dock/Undock */
/* Receive Control */
#define E1000_RCTL_RST 0x00000001 /* Software reset */
#define E1000_RCTL_EN 0x00000002 /* enable */
#define E1000_RCTL_SBP 0x00000004 /* store bad packet */
#define E1000_RCTL_UPE 0x00000008 /* unicast promiscuous enable */
#define E1000_RCTL_MPE 0x00000010 /* multicast promiscuous enab */
#define E1000_RCTL_LPE 0x00000020 /* long packet enable */
#define E1000_RCTL_LBM_NO 0x00000000 /* no loopback mode */
#define E1000_RCTL_LBM_MAC 0x00000040 /* MAC loopback mode */
#define E1000_RCTL_LBM_SLP 0x00000080 /* serial link loopback mode */
#define E1000_RCTL_LBM_TCVR 0x000000C0 /* tcvr loopback mode */
#define E1000_RCTL_DTYP_MASK 0x00000C00 /* Descriptor type mask */
#define E1000_RCTL_DTYP_PS 0x00000400 /* Packet Split descriptor */
#define E1000_RCTL_RDMTS_HALF 0x00000000 /* rx desc min threshold size */
#define E1000_RCTL_RDMTS_QUAT 0x00000100 /* rx desc min threshold size */
#define E1000_RCTL_RDMTS_EIGTH 0x00000200 /* rx desc min threshold size */
#define E1000_RCTL_MO_SHIFT 12 /* multicast offset shift */
#define E1000_RCTL_MO_0 0x00000000 /* multicast offset 11:0 */
#define E1000_RCTL_MO_1 0x00001000 /* multicast offset 12:1 */
#define E1000_RCTL_MO_2 0x00002000 /* multicast offset 13:2 */
#define E1000_RCTL_MO_3 0x00003000 /* multicast offset 15:4 */
#define E1000_RCTL_MDR 0x00004000 /* multicast desc ring 0 */
#define E1000_RCTL_BAM 0x00008000 /* broadcast enable */
/* these buffer sizes are valid if E1000_RCTL_BSEX is 0 */
#define E1000_RCTL_SZ_2048 0x00000000 /* rx buffer size 2048 */
#define E1000_RCTL_SZ_1024 0x00010000 /* rx buffer size 1024 */
#define E1000_RCTL_SZ_512 0x00020000 /* rx buffer size 512 */
#define E1000_RCTL_SZ_256 0x00030000 /* rx buffer size 256 */
/* these buffer sizes are valid if E1000_RCTL_BSEX is 1 */
#define E1000_RCTL_SZ_16384 0x00010000 /* rx buffer size 16384 */
#define E1000_RCTL_SZ_8192 0x00020000 /* rx buffer size 8192 */
#define E1000_RCTL_SZ_4096 0x00030000 /* rx buffer size 4096 */
#define E1000_RCTL_VFE 0x00040000 /* vlan filter enable */
#define E1000_RCTL_CFIEN 0x00080000 /* canonical form enable */
#define E1000_RCTL_CFI 0x00100000 /* canonical form indicator */
#define E1000_RCTL_DPF 0x00400000 /* discard pause frames */
#define E1000_RCTL_PMCF 0x00800000 /* pass MAC control frames */
#define E1000_RCTL_BSEX 0x02000000 /* Buffer size extension */
#define E1000_RCTL_SECRC 0x04000000 /* Strip Ethernet CRC */
#define E1000_RCTL_FLXBUF_MASK 0x78000000 /* Flexible buffer size */
#define E1000_RCTL_FLXBUF_SHIFT 27 /* Flexible buffer shift */
/* Use byte values for the following shift parameters
* Usage:
* psrctl |= (((ROUNDUP(value0, 128) >> E1000_PSRCTL_BSIZE0_SHIFT) &
* E1000_PSRCTL_BSIZE0_MASK) |
* ((ROUNDUP(value1, 1024) >> E1000_PSRCTL_BSIZE1_SHIFT) &
* E1000_PSRCTL_BSIZE1_MASK) |
* ((ROUNDUP(value2, 1024) << E1000_PSRCTL_BSIZE2_SHIFT) &
* E1000_PSRCTL_BSIZE2_MASK) |
* ((ROUNDUP(value3, 1024) << E1000_PSRCTL_BSIZE3_SHIFT) |;
* E1000_PSRCTL_BSIZE3_MASK))
* where value0 = [128..16256], default=256
* value1 = [1024..64512], default=4096
* value2 = [0..64512], default=4096
* value3 = [0..64512], default=0
*/
#define E1000_PSRCTL_BSIZE0_MASK 0x0000007F
#define E1000_PSRCTL_BSIZE1_MASK 0x00003F00
#define E1000_PSRCTL_BSIZE2_MASK 0x003F0000
#define E1000_PSRCTL_BSIZE3_MASK 0x3F000000
#define E1000_PSRCTL_BSIZE0_SHIFT 7 /* Shift _right_ 7 */
#define E1000_PSRCTL_BSIZE1_SHIFT 2 /* Shift _right_ 2 */
#define E1000_PSRCTL_BSIZE2_SHIFT 6 /* Shift _left_ 6 */
#define E1000_PSRCTL_BSIZE3_SHIFT 14 /* Shift _left_ 14 */
/* Receive Descriptor */
#define E1000_RDT_DELAY 0x0000ffff /* Delay timer (1=1024us) */
#define E1000_RDT_FPDB 0x80000000 /* Flush descriptor block */
#define E1000_RDLEN_LEN 0x0007ff80 /* descriptor length */
#define E1000_RDH_RDH 0x0000ffff /* receive descriptor head */
#define E1000_RDT_RDT 0x0000ffff /* receive descriptor tail */
/* Flow Control */
#define E1000_FCRTH_RTH 0x0000FFF8 /* Mask Bits[15:3] for RTH */
#define E1000_FCRTH_XFCE 0x80000000 /* External Flow Control Enable */
#define E1000_FCRTL_RTL 0x0000FFF8 /* Mask Bits[15:3] for RTL */
#define E1000_FCRTL_XONE 0x80000000 /* Enable XON frame transmission */
/* Header split receive */
#define E1000_RFCTL_ISCSI_DIS 0x00000001
#define E1000_RFCTL_ISCSI_DWC_MASK 0x0000003E
#define E1000_RFCTL_ISCSI_DWC_SHIFT 1
#define E1000_RFCTL_NFSW_DIS 0x00000040
#define E1000_RFCTL_NFSR_DIS 0x00000080
#define E1000_RFCTL_NFS_VER_MASK 0x00000300
#define E1000_RFCTL_NFS_VER_SHIFT 8
#define E1000_RFCTL_IPV6_DIS 0x00000400
#define E1000_RFCTL_IPV6_XSUM_DIS 0x00000800
#define E1000_RFCTL_ACK_DIS 0x00001000
#define E1000_RFCTL_ACKD_DIS 0x00002000
#define E1000_RFCTL_IPFRSP_DIS 0x00004000
#define E1000_RFCTL_EXTEN 0x00008000
#define E1000_RFCTL_IPV6_EX_DIS 0x00010000
#define E1000_RFCTL_NEW_IPV6_EXT_DIS 0x00020000
/* Receive Descriptor Control */
#define E1000_RXDCTL_PTHRESH 0x0000003F /* RXDCTL Prefetch Threshold */
#define E1000_RXDCTL_HTHRESH 0x00003F00 /* RXDCTL Host Threshold */
#define E1000_RXDCTL_WTHRESH 0x003F0000 /* RXDCTL Writeback Threshold */
#define E1000_RXDCTL_GRAN 0x01000000 /* RXDCTL Granularity */
/* Transmit Descriptor Control */
#define E1000_TXDCTL_PTHRESH 0x000000FF /* TXDCTL Prefetch Threshold */
#define E1000_TXDCTL_HTHRESH 0x0000FF00 /* TXDCTL Host Threshold */
#define E1000_TXDCTL_WTHRESH 0x00FF0000 /* TXDCTL Writeback Threshold */
#define E1000_TXDCTL_GRAN 0x01000000 /* TXDCTL Granularity */
#define E1000_TXDCTL_LWTHRESH 0xFE000000 /* TXDCTL Low Threshold */
#define E1000_TXDCTL_FULL_TX_DESC_WB 0x01010000 /* GRAN=1, WTHRESH=1 */
#define E1000_TXDCTL_COUNT_DESC 0x00400000 /* Enable the counting of desc.
still to be processed. */
/* Transmit Configuration Word */
#define E1000_TXCW_FD 0x00000020 /* TXCW full duplex */
#define E1000_TXCW_HD 0x00000040 /* TXCW half duplex */
#define E1000_TXCW_PAUSE 0x00000080 /* TXCW sym pause request */
#define E1000_TXCW_ASM_DIR 0x00000100 /* TXCW astm pause direction */
#define E1000_TXCW_PAUSE_MASK 0x00000180 /* TXCW pause request mask */
#define E1000_TXCW_RF 0x00003000 /* TXCW remote fault */
#define E1000_TXCW_NP 0x00008000 /* TXCW next page */
#define E1000_TXCW_CW 0x0000ffff /* TxConfigWord mask */
#define E1000_TXCW_TXC 0x40000000 /* Transmit Config control */
#define E1000_TXCW_ANE 0x80000000 /* Auto-neg enable */
/* Receive Configuration Word */
#define E1000_RXCW_CW 0x0000ffff /* RxConfigWord mask */
#define E1000_RXCW_NC 0x04000000 /* Receive config no carrier */
#define E1000_RXCW_IV 0x08000000 /* Receive config invalid */
#define E1000_RXCW_CC 0x10000000 /* Receive config change */
#define E1000_RXCW_C 0x20000000 /* Receive config */
#define E1000_RXCW_SYNCH 0x40000000 /* Receive config synch */
#define E1000_RXCW_ANC 0x80000000 /* Auto-neg complete */
/* Transmit Control */
#define E1000_TCTL_RST 0x00000001 /* software reset */
#define E1000_TCTL_EN 0x00000002 /* enable tx */
#define E1000_TCTL_BCE 0x00000004 /* busy check enable */
#define E1000_TCTL_PSP 0x00000008 /* pad short packets */
#define E1000_TCTL_CT 0x00000ff0 /* collision threshold */
#define E1000_TCTL_COLD 0x003ff000 /* collision distance */
#define E1000_TCTL_SWXOFF 0x00400000 /* SW Xoff transmission */
#define E1000_TCTL_PBE 0x00800000 /* Packet Burst Enable */
#define E1000_TCTL_RTLC 0x01000000 /* Re-transmit on late collision */
#define E1000_TCTL_NRTU 0x02000000 /* No Re-transmit on underrun */
#define E1000_TCTL_MULR 0x10000000 /* Multiple request support */
/* Receive Checksum Control */
#define E1000_RXCSUM_PCSS_MASK 0x000000FF /* Packet Checksum Start */
#define E1000_RXCSUM_IPOFL 0x00000100 /* IPv4 checksum offload */
#define E1000_RXCSUM_TUOFL 0x00000200 /* TCP / UDP checksum offload */
#define E1000_RXCSUM_IPV6OFL 0x00000400 /* IPv6 checksum offload */
#define E1000_RXCSUM_IPPCSE 0x00001000 /* IP payload checksum enable */
#define E1000_RXCSUM_PCSD 0x00002000 /* packet checksum disabled */
/* Multiple Receive Queue Control */
#define E1000_MRQC_ENABLE_MASK 0x00000003
#define E1000_MRQC_ENABLE_RSS_2Q 0x00000001
#define E1000_MRQC_ENABLE_RSS_INT 0x00000004
#define E1000_MRQC_RSS_FIELD_MASK 0xFFFF0000
#define E1000_MRQC_RSS_FIELD_IPV4_TCP 0x00010000
#define E1000_MRQC_RSS_FIELD_IPV4 0x00020000
#define E1000_MRQC_RSS_FIELD_IPV6_TCP 0x00040000
#define E1000_MRQC_RSS_FIELD_IPV6_EX 0x00080000
#define E1000_MRQC_RSS_FIELD_IPV6 0x00100000
/* Definitions for power management and wakeup registers */
/* Wake Up Control */
#define E1000_WUC_APME 0x00000001 /* APM Enable */
#define E1000_WUC_PME_EN 0x00000002 /* PME Enable */
#define E1000_WUC_PME_STATUS 0x00000004 /* PME Status */
#define E1000_WUC_APMPME 0x00000008 /* Assert PME on APM Wakeup */
#define E1000_WUC_SPM 0x80000000 /* Enable SPM */
/* Wake Up Filter Control */
#define E1000_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */
#define E1000_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */
#define E1000_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */
#define E1000_WUFC_MC 0x00000008 /* Directed Multicast Wakeup Enable */
#define E1000_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */
#define E1000_WUFC_ARP 0x00000020 /* ARP Request Packet Wakeup Enable */
#define E1000_WUFC_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Enable */
#define E1000_WUFC_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Enable */
#define E1000_WUFC_IGNORE_TCO 0x00008000 /* Ignore WakeOn TCO packets */
#define E1000_WUFC_FLX0 0x00010000 /* Flexible Filter 0 Enable */
#define E1000_WUFC_FLX1 0x00020000 /* Flexible Filter 1 Enable */
#define E1000_WUFC_FLX2 0x00040000 /* Flexible Filter 2 Enable */
#define E1000_WUFC_FLX3 0x00080000 /* Flexible Filter 3 Enable */
#define E1000_WUFC_ALL_FILTERS 0x000F00FF /* Mask for all wakeup filters */
#define E1000_WUFC_FLX_OFFSET 16 /* Offset to the Flexible Filters bits */
#define E1000_WUFC_FLX_FILTERS 0x000F0000 /* Mask for the 4 flexible filters */
/* Wake Up Status */
#define E1000_WUS_LNKC 0x00000001 /* Link Status Changed */
#define E1000_WUS_MAG 0x00000002 /* Magic Packet Received */
#define E1000_WUS_EX 0x00000004 /* Directed Exact Received */
#define E1000_WUS_MC 0x00000008 /* Directed Multicast Received */
#define E1000_WUS_BC 0x00000010 /* Broadcast Received */
#define E1000_WUS_ARP 0x00000020 /* ARP Request Packet Received */
#define E1000_WUS_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Received */
#define E1000_WUS_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Received */
#define E1000_WUS_FLX0 0x00010000 /* Flexible Filter 0 Match */
#define E1000_WUS_FLX1 0x00020000 /* Flexible Filter 1 Match */
#define E1000_WUS_FLX2 0x00040000 /* Flexible Filter 2 Match */
#define E1000_WUS_FLX3 0x00080000 /* Flexible Filter 3 Match */
#define E1000_WUS_FLX_FILTERS 0x000F0000 /* Mask for the 4 flexible filters */
/* Management Control */
#define E1000_MANC_SMBUS_EN 0x00000001 /* SMBus Enabled - RO */
#define E1000_MANC_ASF_EN 0x00000002 /* ASF Enabled - RO */
#define E1000_MANC_R_ON_FORCE 0x00000004 /* Reset on Force TCO - RO */
#define E1000_MANC_RMCP_EN 0x00000100 /* Enable RCMP 026Fh Filtering */
#define E1000_MANC_0298_EN 0x00000200 /* Enable RCMP 0298h Filtering */
#define E1000_MANC_IPV4_EN 0x00000400 /* Enable IPv4 */
#define E1000_MANC_IPV6_EN 0x00000800 /* Enable IPv6 */
#define E1000_MANC_SNAP_EN 0x00001000 /* Accept LLC/SNAP */
#define E1000_MANC_ARP_EN 0x00002000 /* Enable ARP Request Filtering */
#define E1000_MANC_NEIGHBOR_EN 0x00004000 /* Enable Neighbor Discovery
* Filtering */
#define E1000_MANC_ARP_RES_EN 0x00008000 /* Enable ARP response Filtering */
#define E1000_MANC_TCO_RESET 0x00010000 /* TCO Reset Occurred */
#define E1000_MANC_RCV_TCO_EN 0x00020000 /* Receive TCO Packets Enabled */
#define E1000_MANC_REPORT_STATUS 0x00040000 /* Status Reporting Enabled */
#define E1000_MANC_BLK_PHY_RST_ON_IDE 0x00040000 /* Block phy resets */
#define E1000_MANC_EN_MAC_ADDR_FILTER 0x00100000 /* Enable MAC address
* filtering */
#define E1000_MANC_EN_MNG2HOST 0x00200000 /* Enable MNG packets to host
* memory */
#define E1000_MANC_EN_IP_ADDR_FILTER 0x00400000 /* Enable IP address
* filtering */
#define E1000_MANC_EN_XSUM_FILTER 0x00800000 /* Enable checksum filtering */
#define E1000_MANC_BR_EN 0x01000000 /* Enable broadcast filtering */
#define E1000_MANC_SMB_REQ 0x01000000 /* SMBus Request */
#define E1000_MANC_SMB_GNT 0x02000000 /* SMBus Grant */
#define E1000_MANC_SMB_CLK_IN 0x04000000 /* SMBus Clock In */
#define E1000_MANC_SMB_DATA_IN 0x08000000 /* SMBus Data In */
#define E1000_MANC_SMB_DATA_OUT 0x10000000 /* SMBus Data Out */
#define E1000_MANC_SMB_CLK_OUT 0x20000000 /* SMBus Clock Out */
#define E1000_MANC_SMB_DATA_OUT_SHIFT 28 /* SMBus Data Out Shift */
#define E1000_MANC_SMB_CLK_OUT_SHIFT 29 /* SMBus Clock Out Shift */
/* SW Semaphore Register */
#define E1000_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */
#define E1000_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */
#define E1000_SWSM_WMNG 0x00000004 /* Wake MNG Clock */
#define E1000_SWSM_DRV_LOAD 0x00000008 /* Driver Loaded Bit */
/* FW Semaphore Register */
#define E1000_FWSM_MODE_MASK 0x0000000E /* FW mode */
#define E1000_FWSM_MODE_SHIFT 1
#define E1000_FWSM_FW_VALID 0x00008000 /* FW established a valid mode */
/* FFLT Debug Register */
#define E1000_FFLT_DBG_INVC 0x00100000 /* Invalid /C/ code handling */
typedef enum {
e1000_mng_mode_none = 0,
e1000_mng_mode_asf,
e1000_mng_mode_pt,
e1000_mng_mode_ipmi,
e1000_mng_mode_host_interface_only
} e1000_mng_mode;
/* Host Inteface Control Register */
#define E1000_HICR_EN 0x00000001 /* Enable Bit - RO */
#define E1000_HICR_C 0x00000002 /* Driver sets this bit when done
* to put command in RAM */
#define E1000_HICR_SV 0x00000004 /* Status Validity */
#define E1000_HICR_FWR 0x00000080 /* FW reset. Set by the Host */
/* Host Interface Command Interface - Address range 0x8800-0x8EFF */
#define E1000_HI_MAX_DATA_LENGTH 252 /* Host Interface data length */
#define E1000_HI_MAX_BLOCK_BYTE_LENGTH 1792 /* Number of bytes in range */
#define E1000_HI_MAX_BLOCK_DWORD_LENGTH 448 /* Number of dwords in range */
#define E1000_HI_COMMAND_TIMEOUT 500 /* Time in ms to process HI command */
struct e1000_host_command_header {
uint8_t command_id;
uint8_t command_length;
uint8_t command_options; /* I/F bits for command, status for return */
uint8_t checksum;
};
struct e1000_host_command_info {
struct e1000_host_command_header command_header; /* Command Head/Command Result Head has 4 bytes */
uint8_t command_data[E1000_HI_MAX_DATA_LENGTH]; /* Command data can length 0..252 */
};
/* Host SMB register #0 */
#define E1000_HSMC0R_CLKIN 0x00000001 /* SMB Clock in */
#define E1000_HSMC0R_DATAIN 0x00000002 /* SMB Data in */
#define E1000_HSMC0R_DATAOUT 0x00000004 /* SMB Data out */
#define E1000_HSMC0R_CLKOUT 0x00000008 /* SMB Clock out */
/* Host SMB register #1 */
#define E1000_HSMC1R_CLKIN E1000_HSMC0R_CLKIN
#define E1000_HSMC1R_DATAIN E1000_HSMC0R_DATAIN
#define E1000_HSMC1R_DATAOUT E1000_HSMC0R_DATAOUT
#define E1000_HSMC1R_CLKOUT E1000_HSMC0R_CLKOUT
/* FW Status Register */
#define E1000_FWSTS_FWS_MASK 0x000000FF /* FW Status */
/* Wake Up Packet Length */
#define E1000_WUPL_LENGTH_MASK 0x0FFF /* Only the lower 12 bits are valid */
#define E1000_MDALIGN 4096
/* PCI-Ex registers */
/* PCI-Ex Control Register */
#define E1000_GCR_RXD_NO_SNOOP 0x00000001
#define E1000_GCR_RXDSCW_NO_SNOOP 0x00000002
#define E1000_GCR_RXDSCR_NO_SNOOP 0x00000004
#define E1000_GCR_TXD_NO_SNOOP 0x00000008
#define E1000_GCR_TXDSCW_NO_SNOOP 0x00000010
#define E1000_GCR_TXDSCR_NO_SNOOP 0x00000020
#define PCI_EX_NO_SNOOP_ALL (E1000_GCR_RXD_NO_SNOOP | \
E1000_GCR_RXDSCW_NO_SNOOP | \
E1000_GCR_RXDSCR_NO_SNOOP | \
E1000_GCR TXD_NO_SNOOP | \
E1000_GCR_TXDSCW_NO_SNOOP | \
E1000_GCR_TXDSCR_NO_SNOOP)
#define E1000_GCR_L1_ACT_WITHOUT_L0S_RX 0x08000000
/* Function Active and Power State to MNG */
#define E1000_FACTPS_FUNC0_POWER_STATE_MASK 0x00000003
#define E1000_FACTPS_LAN0_VALID 0x00000004
#define E1000_FACTPS_FUNC0_AUX_EN 0x00000008
#define E1000_FACTPS_FUNC1_POWER_STATE_MASK 0x000000C0
#define E1000_FACTPS_FUNC1_POWER_STATE_SHIFT 6
#define E1000_FACTPS_LAN1_VALID 0x00000100
#define E1000_FACTPS_FUNC1_AUX_EN 0x00000200
#define E1000_FACTPS_FUNC2_POWER_STATE_MASK 0x00003000
#define E1000_FACTPS_FUNC2_POWER_STATE_SHIFT 12
#define E1000_FACTPS_IDE_ENABLE 0x00004000
#define E1000_FACTPS_FUNC2_AUX_EN 0x00008000
#define E1000_FACTPS_FUNC3_POWER_STATE_MASK 0x000C0000
#define E1000_FACTPS_FUNC3_POWER_STATE_SHIFT 18
#define E1000_FACTPS_SP_ENABLE 0x00100000
#define E1000_FACTPS_FUNC3_AUX_EN 0x00200000
#define E1000_FACTPS_FUNC4_POWER_STATE_MASK 0x03000000
#define E1000_FACTPS_FUNC4_POWER_STATE_SHIFT 24
#define E1000_FACTPS_IPMI_ENABLE 0x04000000
#define E1000_FACTPS_FUNC4_AUX_EN 0x08000000
#define E1000_FACTPS_MNGCG 0x20000000
#define E1000_FACTPS_LAN_FUNC_SEL 0x40000000
#define E1000_FACTPS_PM_STATE_CHANGED 0x80000000
/* EEPROM Commands - Microwire */
#define EEPROM_READ_OPCODE_MICROWIRE 0x6 /* EEPROM read opcode */
#define EEPROM_WRITE_OPCODE_MICROWIRE 0x5 /* EEPROM write opcode */
#define EEPROM_ERASE_OPCODE_MICROWIRE 0x7 /* EEPROM erase opcode */
#define EEPROM_EWEN_OPCODE_MICROWIRE 0x13 /* EEPROM erase/write enable */
#define EEPROM_EWDS_OPCODE_MICROWIRE 0x10 /* EEPROM erast/write disable */
/* EEPROM Commands - SPI */
#define EEPROM_MAX_RETRY_SPI 5000 /* Max wait of 5ms, for RDY signal */
#define EEPROM_READ_OPCODE_SPI 0x03 /* EEPROM read opcode */
#define EEPROM_WRITE_OPCODE_SPI 0x02 /* EEPROM write opcode */
#define EEPROM_A8_OPCODE_SPI 0x08 /* opcode bit-3 = address bit-8 */
#define EEPROM_WREN_OPCODE_SPI 0x06 /* EEPROM set Write Enable latch */
#define EEPROM_WRDI_OPCODE_SPI 0x04 /* EEPROM reset Write Enable latch */
#define EEPROM_RDSR_OPCODE_SPI 0x05 /* EEPROM read Status register */
#define EEPROM_WRSR_OPCODE_SPI 0x01 /* EEPROM write Status register */
#define EEPROM_ERASE4K_OPCODE_SPI 0x20 /* EEPROM ERASE 4KB */
#define EEPROM_ERASE64K_OPCODE_SPI 0xD8 /* EEPROM ERASE 64KB */
#define EEPROM_ERASE256_OPCODE_SPI 0xDB /* EEPROM ERASE 256B */
/* EEPROM Size definitions */
#define EEPROM_WORD_SIZE_SHIFT 6
#define EEPROM_SIZE_SHIFT 10
#define EEPROM_SIZE_MASK 0x1C00
/* EEPROM Word Offsets */
#define EEPROM_COMPAT 0x0003
#define EEPROM_ID_LED_SETTINGS 0x0004
#define EEPROM_VERSION 0x0005
#define EEPROM_SERDES_AMPLITUDE 0x0006 /* For SERDES output amplitude adjustment. */
#define EEPROM_PHY_CLASS_WORD 0x0007
#define EEPROM_INIT_CONTROL1_REG 0x000A
#define EEPROM_INIT_CONTROL2_REG 0x000F
#define EEPROM_INIT_CONTROL3_PORT_B 0x0014
#define EEPROM_INIT_CONTROL3_PORT_A 0x0024
#define EEPROM_CFG 0x0012
#define EEPROM_FLASH_VERSION 0x0032
#define EEPROM_CHECKSUM_REG 0x003F
#define E1000_EEPROM_CFG_DONE 0x00040000 /* MNG config cycle done */
/* Word definitions for ID LED Settings */
#define ID_LED_RESERVED_0000 0x0000
#define ID_LED_RESERVED_FFFF 0xFFFF
#define ID_LED_DEFAULT ((ID_LED_OFF1_ON2 << 12) | \
(ID_LED_OFF1_OFF2 << 8) | \
(ID_LED_DEF1_DEF2 << 4) | \
(ID_LED_DEF1_DEF2))
#define ID_LED_DEF1_DEF2 0x1
#define ID_LED_DEF1_ON2 0x2
#define ID_LED_DEF1_OFF2 0x3
#define ID_LED_ON1_DEF2 0x4
#define ID_LED_ON1_ON2 0x5
#define ID_LED_ON1_OFF2 0x6
#define ID_LED_OFF1_DEF2 0x7
#define ID_LED_OFF1_ON2 0x8
#define ID_LED_OFF1_OFF2 0x9
#define IGP_ACTIVITY_LED_MASK 0xFFFFF0FF
#define IGP_ACTIVITY_LED_ENABLE 0x0300
#define IGP_LED3_MODE 0x07000000
/* Mask bits for SERDES amplitude adjustment in Word 6 of the EEPROM */
#define EEPROM_SERDES_AMPLITUDE_MASK 0x000F
/* Mask bit for PHY class in Word 7 of the EEPROM */
#define EEPROM_PHY_CLASS_A 0x8000
/* Mask bits for fields in Word 0x0a of the EEPROM */
#define EEPROM_WORD0A_ILOS 0x0010
#define EEPROM_WORD0A_SWDPIO 0x01E0
#define EEPROM_WORD0A_LRST 0x0200
#define EEPROM_WORD0A_FD 0x0400
#define EEPROM_WORD0A_66MHZ 0x0800
/* Mask bits for fields in Word 0x0f of the EEPROM */
#define EEPROM_WORD0F_PAUSE_MASK 0x3000
#define EEPROM_WORD0F_PAUSE 0x1000
#define EEPROM_WORD0F_ASM_DIR 0x2000
#define EEPROM_WORD0F_ANE 0x0800
#define EEPROM_WORD0F_SWPDIO_EXT 0x00F0
/* For checksumming, the sum of all words in the EEPROM should equal 0xBABA. */
#define EEPROM_SUM 0xBABA
/* EEPROM Map defines (WORD OFFSETS)*/
#define EEPROM_NODE_ADDRESS_BYTE_0 0
#define EEPROM_PBA_BYTE_1 8
#define EEPROM_RESERVED_WORD 0xFFFF
/* EEPROM Map Sizes (Byte Counts) */
#define PBA_SIZE 4
/* Collision related configuration parameters */
#define E1000_COLLISION_THRESHOLD 15
#define E1000_CT_SHIFT 4
/* Collision distance is a 0-based value that applies to
* half-duplex-capable hardware only. */
#define E1000_COLLISION_DISTANCE 63
#define E1000_COLLISION_DISTANCE_82542 64
#define E1000_FDX_COLLISION_DISTANCE E1000_COLLISION_DISTANCE
#define E1000_HDX_COLLISION_DISTANCE E1000_COLLISION_DISTANCE
#define E1000_COLD_SHIFT 12
/* Number of Transmit and Receive Descriptors must be a multiple of 8 */
#define REQ_TX_DESCRIPTOR_MULTIPLE 8
#define REQ_RX_DESCRIPTOR_MULTIPLE 8
/* Default values for the transmit IPG register */
#define DEFAULT_82542_TIPG_IPGT 10
#define DEFAULT_82543_TIPG_IPGT_FIBER 9
#define DEFAULT_82543_TIPG_IPGT_COPPER 8
#define E1000_TIPG_IPGT_MASK 0x000003FF
#define E1000_TIPG_IPGR1_MASK 0x000FFC00
#define E1000_TIPG_IPGR2_MASK 0x3FF00000
#define DEFAULT_82542_TIPG_IPGR1 2
#define DEFAULT_82543_TIPG_IPGR1 8
#define E1000_TIPG_IPGR1_SHIFT 10
#define DEFAULT_82542_TIPG_IPGR2 10
#define DEFAULT_82543_TIPG_IPGR2 6
#define E1000_TIPG_IPGR2_SHIFT 20
#define E1000_TXDMAC_DPP 0x00000001
/* Adaptive IFS defines */
#define TX_THRESHOLD_START 8
#define TX_THRESHOLD_INCREMENT 10
#define TX_THRESHOLD_DECREMENT 1
#define TX_THRESHOLD_STOP 190
#define TX_THRESHOLD_DISABLE 0
#define TX_THRESHOLD_TIMER_MS 10000
#define MIN_NUM_XMITS 1000
#define IFS_MAX 80
#define IFS_STEP 10
#define IFS_MIN 40
#define IFS_RATIO 4
/* Extended Configuration Control and Size */
#define E1000_EXTCNF_CTRL_PCIE_WRITE_ENABLE 0x00000001
#define E1000_EXTCNF_CTRL_PHY_WRITE_ENABLE 0x00000002
#define E1000_EXTCNF_CTRL_D_UD_ENABLE 0x00000004
#define E1000_EXTCNF_CTRL_D_UD_LATENCY 0x00000008
#define E1000_EXTCNF_CTRL_D_UD_OWNER 0x00000010
#define E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP 0x00000020
#define E1000_EXTCNF_CTRL_MDIO_HW_OWNERSHIP 0x00000040
#define E1000_EXTCNF_CTRL_EXT_CNF_POINTER 0x1FFF0000
#define E1000_EXTCNF_SIZE_EXT_PHY_LENGTH 0x000000FF
#define E1000_EXTCNF_SIZE_EXT_DOCK_LENGTH 0x0000FF00
#define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH 0x00FF0000
/* PBA constants */
#define E1000_PBA_12K 0x000C /* 12KB, default Rx allocation */
#define E1000_PBA_16K 0x0010 /* 16KB, default TX allocation */
#define E1000_PBA_22K 0x0016
#define E1000_PBA_24K 0x0018
#define E1000_PBA_30K 0x001E
#define E1000_PBA_32K 0x0020
#define E1000_PBA_38K 0x0026
#define E1000_PBA_40K 0x0028
#define E1000_PBA_48K 0x0030 /* 48KB, default RX allocation */
/* Flow Control Constants */
#define FLOW_CONTROL_ADDRESS_LOW 0x00C28001
#define FLOW_CONTROL_ADDRESS_HIGH 0x00000100
#define FLOW_CONTROL_TYPE 0x8808
/* The historical defaults for the flow control values are given below. */
#define FC_DEFAULT_HI_THRESH (0x8000) /* 32KB */
#define FC_DEFAULT_LO_THRESH (0x4000) /* 16KB */
#define FC_DEFAULT_TX_TIMER (0x100) /* ~130 us */
/* PCIX Config space */
#define PCIX_COMMAND_REGISTER 0xE6
#define PCIX_STATUS_REGISTER_LO 0xE8
#define PCIX_STATUS_REGISTER_HI 0xEA
#define PCIX_COMMAND_MMRBC_MASK 0x000C
#define PCIX_COMMAND_MMRBC_SHIFT 0x2
#define PCIX_STATUS_HI_MMRBC_MASK 0x0060
#define PCIX_STATUS_HI_MMRBC_SHIFT 0x5
#define PCIX_STATUS_HI_MMRBC_4K 0x3
#define PCIX_STATUS_HI_MMRBC_2K 0x2
/* Number of bits required to shift right the "pause" bits from the
* EEPROM (bits 13:12) to the "pause" (bits 8:7) field in the TXCW register.
*/
#define PAUSE_SHIFT 5
/* Number of bits required to shift left the "SWDPIO" bits from the
* EEPROM (bits 8:5) to the "SWDPIO" (bits 25:22) field in the CTRL register.
*/
#define SWDPIO_SHIFT 17
/* Number of bits required to shift left the "SWDPIO_EXT" bits from the
* EEPROM word F (bits 7:4) to the bits 11:8 of The Extended CTRL register.
*/
#define SWDPIO__EXT_SHIFT 4
/* Number of bits required to shift left the "ILOS" bit from the EEPROM
* (bit 4) to the "ILOS" (bit 7) field in the CTRL register.
*/
#define ILOS_SHIFT 3
#define RECEIVE_BUFFER_ALIGN_SIZE (256)
/* Number of milliseconds we wait for auto-negotiation to complete */
#define LINK_UP_TIMEOUT 500
/* Number of 100 microseconds we wait for PCI Express master disable */
#define MASTER_DISABLE_TIMEOUT 800
/* Number of milliseconds we wait for Eeprom auto read bit done after MAC reset */
#define AUTO_READ_DONE_TIMEOUT 10
/* Number of milliseconds we wait for PHY configuration done after MAC reset */
#define PHY_CFG_TIMEOUT 40
#define E1000_TX_BUFFER_SIZE ((uint32_t)1514)
/* The carrier extension symbol, as received by the NIC. */
#define CARRIER_EXTENSION 0x0F
/* TBI_ACCEPT macro definition:
*
* This macro requires:
* adapter = a pointer to struct e1000_hw
* status = the 8 bit status field of the RX descriptor with EOP set
* error = the 8 bit error field of the RX descriptor with EOP set
* length = the sum of all the length fields of the RX descriptors that
* make up the current frame
* last_byte = the last byte of the frame DMAed by the hardware
* max_frame_length = the maximum frame length we want to accept.
* min_frame_length = the minimum frame length we want to accept.
*
* This macro is a conditional that should be used in the interrupt
* handler's Rx processing routine when RxErrors have been detected.
*
* Typical use:
* ...
* if (TBI_ACCEPT) {
* accept_frame = TRUE;
* e1000_tbi_adjust_stats(adapter, MacAddress);
* frame_length--;
* } else {
* accept_frame = FALSE;
* }
* ...
*/
#define TBI_ACCEPT(adapter, status, errors, length, last_byte) \
((adapter)->tbi_compatibility_on && \
(((errors) & E1000_RXD_ERR_FRAME_ERR_MASK) == E1000_RXD_ERR_CE) && \
((last_byte) == CARRIER_EXTENSION) && \
(((status) & E1000_RXD_STAT_VP) ? \
(((length) > ((adapter)->min_frame_size - VLAN_TAG_SIZE)) && \
((length) <= ((adapter)->max_frame_size + 1))) : \
(((length) > (adapter)->min_frame_size) && \
((length) <= ((adapter)->max_frame_size + VLAN_TAG_SIZE + 1)))))
/* Structures, enums, and macros for the PHY */
/* Bit definitions for the Management Data IO (MDIO) and Management Data
* Clock (MDC) pins in the Device Control Register.
*/
#define E1000_CTRL_PHY_RESET_DIR E1000_CTRL_SWDPIO0
#define E1000_CTRL_PHY_RESET E1000_CTRL_SWDPIN0
#define E1000_CTRL_MDIO_DIR E1000_CTRL_SWDPIO2
#define E1000_CTRL_MDIO E1000_CTRL_SWDPIN2
#define E1000_CTRL_MDC_DIR E1000_CTRL_SWDPIO3
#define E1000_CTRL_MDC E1000_CTRL_SWDPIN3
#define E1000_CTRL_PHY_RESET_DIR4 E1000_CTRL_EXT_SDP4_DIR
#define E1000_CTRL_PHY_RESET4 E1000_CTRL_EXT_SDP4_DATA
/* PHY 1000 MII Register/Bit Definitions */
/* PHY Registers defined by IEEE */
#define PHY_CTRL 0x00 /* Control Register */
#define PHY_STATUS 0x01 /* Status Regiser */
#define PHY_ID1 0x02 /* Phy Id Reg (word 1) */
#define PHY_ID2 0x03 /* Phy Id Reg (word 2) */
#define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */
#define PHY_LP_ABILITY 0x05 /* Link Partner Ability (Base Page) */
#define PHY_AUTONEG_EXP 0x06 /* Autoneg Expansion Reg */
#define PHY_NEXT_PAGE_TX 0x07 /* Next Page TX */
#define PHY_LP_NEXT_PAGE 0x08 /* Link Partner Next Page */
#define PHY_1000T_CTRL 0x09 /* 1000Base-T Control Reg */
#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */
#define PHY_EXT_STATUS 0x0F /* Extended Status Reg */
#define MAX_PHY_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */
#define MAX_PHY_MULTI_PAGE_REG 0xF /* Registers equal on all pages */
/* M88E1000 Specific Registers */
#define M88E1000_PHY_SPEC_CTRL 0x10 /* PHY Specific Control Register */
#define M88E1000_PHY_SPEC_STATUS 0x11 /* PHY Specific Status Register */
#define M88E1000_INT_ENABLE 0x12 /* Interrupt Enable Register */
#define M88E1000_INT_STATUS 0x13 /* Interrupt Status Register */
#define M88E1000_EXT_PHY_SPEC_CTRL 0x14 /* Extended PHY Specific Control */
#define M88E1000_RX_ERR_CNTR 0x15 /* Receive Error Counter */
#define M88E1000_PHY_EXT_CTRL 0x1A /* PHY extend control register */
#define M88E1000_PHY_PAGE_SELECT 0x1D /* Reg 29 for page number setting */
#define M88E1000_PHY_GEN_CONTROL 0x1E /* Its meaning depends on reg 29 */
#define M88E1000_PHY_VCO_REG_BIT8 0x100 /* Bits 8 & 11 are adjusted for */
#define M88E1000_PHY_VCO_REG_BIT11 0x800 /* improved BER performance */
#define IGP01E1000_IEEE_REGS_PAGE 0x0000
#define IGP01E1000_IEEE_RESTART_AUTONEG 0x3300
#define IGP01E1000_IEEE_FORCE_GIGA 0x0140
/* IGP01E1000 Specific Registers */
#define IGP01E1000_PHY_PORT_CONFIG 0x10 /* PHY Specific Port Config Register */
#define IGP01E1000_PHY_PORT_STATUS 0x11 /* PHY Specific Status Register */
#define IGP01E1000_PHY_PORT_CTRL 0x12 /* PHY Specific Control Register */
#define IGP01E1000_PHY_LINK_HEALTH 0x13 /* PHY Link Health Register */
#define IGP01E1000_GMII_FIFO 0x14 /* GMII FIFO Register */
#define IGP01E1000_PHY_CHANNEL_QUALITY 0x15 /* PHY Channel Quality Register */
#define IGP02E1000_PHY_POWER_MGMT 0x19
#define IGP01E1000_PHY_PAGE_SELECT 0x1F /* PHY Page Select Core Register */
/* IGP01E1000 AGC Registers - stores the cable length values*/
#define IGP01E1000_PHY_AGC_A 0x1172
#define IGP01E1000_PHY_AGC_B 0x1272
#define IGP01E1000_PHY_AGC_C 0x1472
#define IGP01E1000_PHY_AGC_D 0x1872
/* IGP02E1000 AGC Registers for cable length values */
#define IGP02E1000_PHY_AGC_A 0x11B1
#define IGP02E1000_PHY_AGC_B 0x12B1
#define IGP02E1000_PHY_AGC_C 0x14B1
#define IGP02E1000_PHY_AGC_D 0x18B1
/* IGP01E1000 DSP Reset Register */
#define IGP01E1000_PHY_DSP_RESET 0x1F33
#define IGP01E1000_PHY_DSP_SET 0x1F71
#define IGP01E1000_PHY_DSP_FFE 0x1F35
#define IGP01E1000_PHY_CHANNEL_NUM 4
#define IGP02E1000_PHY_CHANNEL_NUM 4
#define IGP01E1000_PHY_AGC_PARAM_A 0x1171
#define IGP01E1000_PHY_AGC_PARAM_B 0x1271
#define IGP01E1000_PHY_AGC_PARAM_C 0x1471
#define IGP01E1000_PHY_AGC_PARAM_D 0x1871
#define IGP01E1000_PHY_EDAC_MU_INDEX 0xC000
#define IGP01E1000_PHY_EDAC_SIGN_EXT_9_BITS 0x8000
#define IGP01E1000_PHY_ANALOG_TX_STATE 0x2890
#define IGP01E1000_PHY_ANALOG_CLASS_A 0x2000
#define IGP01E1000_PHY_FORCE_ANALOG_ENABLE 0x0004
#define IGP01E1000_PHY_DSP_FFE_CM_CP 0x0069
#define IGP01E1000_PHY_DSP_FFE_DEFAULT 0x002A
/* IGP01E1000 PCS Initialization register - stores the polarity status when
* speed = 1000 Mbps. */
#define IGP01E1000_PHY_PCS_INIT_REG 0x00B4
#define IGP01E1000_PHY_PCS_CTRL_REG 0x00B5
#define IGP01E1000_ANALOG_REGS_PAGE 0x20C0
/* PHY Control Register */
#define MII_CR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, 00=10 */
#define MII_CR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */
#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */
#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */
#define MII_CR_ISOLATE 0x0400 /* Isolate PHY from MII */
#define MII_CR_POWER_DOWN 0x0800 /* Power down */
#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */
#define MII_CR_SPEED_SELECT_LSB 0x2000 /* bits 6,13: 10=1000, 01=100, 00=10 */
#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */
#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */
/* PHY Status Register */
#define MII_SR_EXTENDED_CAPS 0x0001 /* Extended register capabilities */
#define MII_SR_JABBER_DETECT 0x0002 /* Jabber Detected */
#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */
#define MII_SR_AUTONEG_CAPS 0x0008 /* Auto Neg Capable */
#define MII_SR_REMOTE_FAULT 0x0010 /* Remote Fault Detect */
#define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */
#define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */
#define MII_SR_EXTENDED_STATUS 0x0100 /* Ext. status info in Reg 0x0F */
#define MII_SR_100T2_HD_CAPS 0x0200 /* 100T2 Half Duplex Capable */
#define MII_SR_100T2_FD_CAPS 0x0400 /* 100T2 Full Duplex Capable */
#define MII_SR_10T_HD_CAPS 0x0800 /* 10T Half Duplex Capable */
#define MII_SR_10T_FD_CAPS 0x1000 /* 10T Full Duplex Capable */
#define MII_SR_100X_HD_CAPS 0x2000 /* 100X Half Duplex Capable */
#define MII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */
#define MII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */
/* Autoneg Advertisement Register */
#define NWAY_AR_SELECTOR_FIELD 0x0001 /* indicates IEEE 802.3 CSMA/CD */
#define NWAY_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */
#define NWAY_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */
#define NWAY_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */
#define NWAY_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */
#define NWAY_AR_100T4_CAPS 0x0200 /* 100T4 Capable */
#define NWAY_AR_PAUSE 0x0400 /* Pause operation desired */
#define NWAY_AR_ASM_DIR 0x0800 /* Asymmetric Pause Direction bit */
#define NWAY_AR_REMOTE_FAULT 0x2000 /* Remote Fault detected */
#define NWAY_AR_NEXT_PAGE 0x8000 /* Next Page ability supported */
/* Link Partner Ability Register (Base Page) */
#define NWAY_LPAR_SELECTOR_FIELD 0x0000 /* LP protocol selector field */
#define NWAY_LPAR_10T_HD_CAPS 0x0020 /* LP is 10T Half Duplex Capable */
#define NWAY_LPAR_10T_FD_CAPS 0x0040 /* LP is 10T Full Duplex Capable */
#define NWAY_LPAR_100TX_HD_CAPS 0x0080 /* LP is 100TX Half Duplex Capable */
#define NWAY_LPAR_100TX_FD_CAPS 0x0100 /* LP is 100TX Full Duplex Capable */
#define NWAY_LPAR_100T4_CAPS 0x0200 /* LP is 100T4 Capable */
#define NWAY_LPAR_PAUSE 0x0400 /* LP Pause operation desired */
#define NWAY_LPAR_ASM_DIR 0x0800 /* LP Asymmetric Pause Direction bit */
#define NWAY_LPAR_REMOTE_FAULT 0x2000 /* LP has detected Remote Fault */
#define NWAY_LPAR_ACKNOWLEDGE 0x4000 /* LP has rx'd link code word */
#define NWAY_LPAR_NEXT_PAGE 0x8000 /* Next Page ability supported */
/* Autoneg Expansion Register */
#define NWAY_ER_LP_NWAY_CAPS 0x0001 /* LP has Auto Neg Capability */
#define NWAY_ER_PAGE_RXD 0x0002 /* LP is 10T Half Duplex Capable */
#define NWAY_ER_NEXT_PAGE_CAPS 0x0004 /* LP is 10T Full Duplex Capable */
#define NWAY_ER_LP_NEXT_PAGE_CAPS 0x0008 /* LP is 100TX Half Duplex Capable */
#define NWAY_ER_PAR_DETECT_FAULT 0x0010 /* LP is 100TX Full Duplex Capable */
/* Next Page TX Register */
#define NPTX_MSG_CODE_FIELD 0x0001 /* NP msg code or unformatted data */
#define NPTX_TOGGLE 0x0800 /* Toggles between exchanges
* of different NP
*/
#define NPTX_ACKNOWLDGE2 0x1000 /* 1 = will comply with msg
* 0 = cannot comply with msg
*/
#define NPTX_MSG_PAGE 0x2000 /* formatted(1)/unformatted(0) pg */
#define NPTX_NEXT_PAGE 0x8000 /* 1 = addition NP will follow
* 0 = sending last NP
*/
/* Link Partner Next Page Register */
#define LP_RNPR_MSG_CODE_FIELD 0x0001 /* NP msg code or unformatted data */
#define LP_RNPR_TOGGLE 0x0800 /* Toggles between exchanges
* of different NP
*/
#define LP_RNPR_ACKNOWLDGE2 0x1000 /* 1 = will comply with msg
* 0 = cannot comply with msg
*/
#define LP_RNPR_MSG_PAGE 0x2000 /* formatted(1)/unformatted(0) pg */
#define LP_RNPR_ACKNOWLDGE 0x4000 /* 1 = ACK / 0 = NO ACK */
#define LP_RNPR_NEXT_PAGE 0x8000 /* 1 = addition NP will follow
* 0 = sending last NP
*/
/* 1000BASE-T Control Register */
#define CR_1000T_ASYM_PAUSE 0x0080 /* Advertise asymmetric pause bit */
#define CR_1000T_HD_CAPS 0x0100 /* Advertise 1000T HD capability */
#define CR_1000T_FD_CAPS 0x0200 /* Advertise 1000T FD capability */
#define CR_1000T_REPEATER_DTE 0x0400 /* 1=Repeater/switch device port */
/* 0=DTE device */
#define CR_1000T_MS_VALUE 0x0800 /* 1=Configure PHY as Master */
/* 0=Configure PHY as Slave */
#define CR_1000T_MS_ENABLE 0x1000 /* 1=Master/Slave manual config value */
/* 0=Automatic Master/Slave config */
#define CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */
#define CR_1000T_TEST_MODE_1 0x2000 /* Transmit Waveform test */
#define CR_1000T_TEST_MODE_2 0x4000 /* Master Transmit Jitter test */
#define CR_1000T_TEST_MODE_3 0x6000 /* Slave Transmit Jitter test */
#define CR_1000T_TEST_MODE_4 0x8000 /* Transmitter Distortion test */
/* 1000BASE-T Status Register */
#define SR_1000T_IDLE_ERROR_CNT 0x00FF /* Num idle errors since last read */
#define SR_1000T_ASYM_PAUSE_DIR 0x0100 /* LP asymmetric pause direction bit */
#define SR_1000T_LP_HD_CAPS 0x0400 /* LP is 1000T HD capable */
#define SR_1000T_LP_FD_CAPS 0x0800 /* LP is 1000T FD capable */
#define SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */
#define SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */
#define SR_1000T_MS_CONFIG_RES 0x4000 /* 1=Local TX is Master, 0=Slave */
#define SR_1000T_MS_CONFIG_FAULT 0x8000 /* Master/Slave config fault */
#define SR_1000T_REMOTE_RX_STATUS_SHIFT 12
#define SR_1000T_LOCAL_RX_STATUS_SHIFT 13
#define SR_1000T_PHY_EXCESSIVE_IDLE_ERR_COUNT 5
#define FFE_IDLE_ERR_COUNT_TIMEOUT_20 20
#define FFE_IDLE_ERR_COUNT_TIMEOUT_100 100
/* Extended Status Register */
#define IEEE_ESR_1000T_HD_CAPS 0x1000 /* 1000T HD capable */
#define IEEE_ESR_1000T_FD_CAPS 0x2000 /* 1000T FD capable */
#define IEEE_ESR_1000X_HD_CAPS 0x4000 /* 1000X HD capable */
#define IEEE_ESR_1000X_FD_CAPS 0x8000 /* 1000X FD capable */
#define PHY_TX_POLARITY_MASK 0x0100 /* register 10h bit 8 (polarity bit) */
#define PHY_TX_NORMAL_POLARITY 0 /* register 10h bit 8 (normal polarity) */
#define AUTO_POLARITY_DISABLE 0x0010 /* register 11h bit 4 */
/* (0=enable, 1=disable) */
/* M88E1000 PHY Specific Control Register */
#define M88E1000_PSCR_JABBER_DISABLE 0x0001 /* 1=Jabber Function disabled */
#define M88E1000_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reversal enabled */
#define M88E1000_PSCR_SQE_TEST 0x0004 /* 1=SQE Test enabled */
#define M88E1000_PSCR_CLK125_DISABLE 0x0010 /* 1=CLK125 low,
* 0=CLK125 toggling
*/
#define M88E1000_PSCR_MDI_MANUAL_MODE 0x0000 /* MDI Crossover Mode bits 6:5 */
/* Manual MDI configuration */
#define M88E1000_PSCR_MDIX_MANUAL_MODE 0x0020 /* Manual MDIX configuration */
#define M88E1000_PSCR_AUTO_X_1000T 0x0040 /* 1000BASE-T: Auto crossover,
* 100BASE-TX/10BASE-T:
* MDI Mode
*/
#define M88E1000_PSCR_AUTO_X_MODE 0x0060 /* Auto crossover enabled
* all speeds.
*/
#define M88E1000_PSCR_10BT_EXT_DIST_ENABLE 0x0080
/* 1=Enable Extended 10BASE-T distance
* (Lower 10BASE-T RX Threshold)
* 0=Normal 10BASE-T RX Threshold */
#define M88E1000_PSCR_MII_5BIT_ENABLE 0x0100
/* 1=5-Bit interface in 100BASE-TX
* 0=MII interface in 100BASE-TX */
#define M88E1000_PSCR_SCRAMBLER_DISABLE 0x0200 /* 1=Scrambler disable */
#define M88E1000_PSCR_FORCE_LINK_GOOD 0x0400 /* 1=Force link good */
#define M88E1000_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Transmit */
#define M88E1000_PSCR_POLARITY_REVERSAL_SHIFT 1
#define M88E1000_PSCR_AUTO_X_MODE_SHIFT 5
#define M88E1000_PSCR_10BT_EXT_DIST_ENABLE_SHIFT 7
/* M88E1000 PHY Specific Status Register */
#define M88E1000_PSSR_JABBER 0x0001 /* 1=Jabber */
#define M88E1000_PSSR_REV_POLARITY 0x0002 /* 1=Polarity reversed */
#define M88E1000_PSSR_DOWNSHIFT 0x0020 /* 1=Downshifted */
#define M88E1000_PSSR_MDIX 0x0040 /* 1=MDIX; 0=MDI */
#define M88E1000_PSSR_CABLE_LENGTH 0x0380 /* 0=<50M;1=50-80M;2=80-110M;
* 3=110-140M;4=>140M */
#define M88E1000_PSSR_LINK 0x0400 /* 1=Link up, 0=Link down */
#define M88E1000_PSSR_SPD_DPLX_RESOLVED 0x0800 /* 1=Speed & Duplex resolved */
#define M88E1000_PSSR_PAGE_RCVD 0x1000 /* 1=Page received */
#define M88E1000_PSSR_DPLX 0x2000 /* 1=Duplex 0=Half Duplex */
#define M88E1000_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */
#define M88E1000_PSSR_10MBS 0x0000 /* 00=10Mbs */
#define M88E1000_PSSR_100MBS 0x4000 /* 01=100Mbs */
#define M88E1000_PSSR_1000MBS 0x8000 /* 10=1000Mbs */
#define M88E1000_PSSR_REV_POLARITY_SHIFT 1
#define M88E1000_PSSR_DOWNSHIFT_SHIFT 5
#define M88E1000_PSSR_MDIX_SHIFT 6
#define M88E1000_PSSR_CABLE_LENGTH_SHIFT 7
/* M88E1000 Extended PHY Specific Control Register */
#define M88E1000_EPSCR_FIBER_LOOPBACK 0x4000 /* 1=Fiber loopback */
#define M88E1000_EPSCR_DOWN_NO_IDLE 0x8000 /* 1=Lost lock detect enabled.
* Will assert lost lock and bring
* link down if idle not seen
* within 1ms in 1000BASE-T
*/
/* Number of times we will attempt to autonegotiate before downshifting if we
* are the master */
#define M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK 0x0C00
#define M88E1000_EPSCR_MASTER_DOWNSHIFT_1X 0x0000
#define M88E1000_EPSCR_MASTER_DOWNSHIFT_2X 0x0400
#define M88E1000_EPSCR_MASTER_DOWNSHIFT_3X 0x0800
#define M88E1000_EPSCR_MASTER_DOWNSHIFT_4X 0x0C00
/* Number of times we will attempt to autonegotiate before downshifting if we
* are the slave */
#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK 0x0300
#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_DIS 0x0000
#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X 0x0100
#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_2X 0x0200
#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_3X 0x0300
#define M88E1000_EPSCR_TX_CLK_2_5 0x0060 /* 2.5 MHz TX_CLK */
#define M88E1000_EPSCR_TX_CLK_25 0x0070 /* 25 MHz TX_CLK */
#define M88E1000_EPSCR_TX_CLK_0 0x0000 /* NO TX_CLK */
/* IGP01E1000 Specific Port Config Register - R/W */
#define IGP01E1000_PSCFR_AUTO_MDIX_PAR_DETECT 0x0010
#define IGP01E1000_PSCFR_PRE_EN 0x0020
#define IGP01E1000_PSCFR_SMART_SPEED 0x0080
#define IGP01E1000_PSCFR_DISABLE_TPLOOPBACK 0x0100
#define IGP01E1000_PSCFR_DISABLE_JABBER 0x0400
#define IGP01E1000_PSCFR_DISABLE_TRANSMIT 0x2000
/* IGP01E1000 Specific Port Status Register - R/O */
#define IGP01E1000_PSSR_AUTONEG_FAILED 0x0001 /* RO LH SC */
#define IGP01E1000_PSSR_POLARITY_REVERSED 0x0002
#define IGP01E1000_PSSR_CABLE_LENGTH 0x007C
#define IGP01E1000_PSSR_FULL_DUPLEX 0x0200
#define IGP01E1000_PSSR_LINK_UP 0x0400
#define IGP01E1000_PSSR_MDIX 0x0800
#define IGP01E1000_PSSR_SPEED_MASK 0xC000 /* speed bits mask */
#define IGP01E1000_PSSR_SPEED_10MBPS 0x4000
#define IGP01E1000_PSSR_SPEED_100MBPS 0x8000
#define IGP01E1000_PSSR_SPEED_1000MBPS 0xC000
#define IGP01E1000_PSSR_CABLE_LENGTH_SHIFT 0x0002 /* shift right 2 */
#define IGP01E1000_PSSR_MDIX_SHIFT 0x000B /* shift right 11 */
/* IGP01E1000 Specific Port Control Register - R/W */
#define IGP01E1000_PSCR_TP_LOOPBACK 0x0010
#define IGP01E1000_PSCR_CORRECT_NC_SCMBLR 0x0200
#define IGP01E1000_PSCR_TEN_CRS_SELECT 0x0400
#define IGP01E1000_PSCR_FLIP_CHIP 0x0800
#define IGP01E1000_PSCR_AUTO_MDIX 0x1000
#define IGP01E1000_PSCR_FORCE_MDI_MDIX 0x2000 /* 0-MDI, 1-MDIX */
/* IGP01E1000 Specific Port Link Health Register */
#define IGP01E1000_PLHR_SS_DOWNGRADE 0x8000
#define IGP01E1000_PLHR_GIG_SCRAMBLER_ERROR 0x4000
#define IGP01E1000_PLHR_MASTER_FAULT 0x2000
#define IGP01E1000_PLHR_MASTER_RESOLUTION 0x1000
#define IGP01E1000_PLHR_GIG_REM_RCVR_NOK 0x0800 /* LH */
#define IGP01E1000_PLHR_IDLE_ERROR_CNT_OFLOW 0x0400 /* LH */
#define IGP01E1000_PLHR_DATA_ERR_1 0x0200 /* LH */
#define IGP01E1000_PLHR_DATA_ERR_0 0x0100
#define IGP01E1000_PLHR_AUTONEG_FAULT 0x0040
#define IGP01E1000_PLHR_AUTONEG_ACTIVE 0x0010
#define IGP01E1000_PLHR_VALID_CHANNEL_D 0x0008
#define IGP01E1000_PLHR_VALID_CHANNEL_C 0x0004
#define IGP01E1000_PLHR_VALID_CHANNEL_B 0x0002
#define IGP01E1000_PLHR_VALID_CHANNEL_A 0x0001
/* IGP01E1000 Channel Quality Register */
#define IGP01E1000_MSE_CHANNEL_D 0x000F
#define IGP01E1000_MSE_CHANNEL_C 0x00F0
#define IGP01E1000_MSE_CHANNEL_B 0x0F00
#define IGP01E1000_MSE_CHANNEL_A 0xF000
#define IGP02E1000_PM_SPD 0x0001 /* Smart Power Down */
#define IGP02E1000_PM_D3_LPLU 0x0004 /* Enable LPLU in non-D0a modes */
#define IGP02E1000_PM_D0_LPLU 0x0002 /* Enable LPLU in D0a mode */
/* IGP01E1000 DSP reset macros */
#define DSP_RESET_ENABLE 0x0
#define DSP_RESET_DISABLE 0x2
#define E1000_MAX_DSP_RESETS 10
/* IGP01E1000 & IGP02E1000 AGC Registers */
#define IGP01E1000_AGC_LENGTH_SHIFT 7 /* Coarse - 13:11, Fine - 10:7 */
#define IGP02E1000_AGC_LENGTH_SHIFT 9 /* Coarse - 15:13, Fine - 12:9 */
/* IGP02E1000 AGC Register Length 9-bit mask */
#define IGP02E1000_AGC_LENGTH_MASK 0x7F
/* 7 bits (3 Coarse + 4 Fine) --> 128 optional values */
#define IGP01E1000_AGC_LENGTH_TABLE_SIZE 128
#define IGP02E1000_AGC_LENGTH_TABLE_SIZE 113
/* The precision error of the cable length is +/- 10 meters */
#define IGP01E1000_AGC_RANGE 10
#define IGP02E1000_AGC_RANGE 15
/* IGP01E1000 PCS Initialization register */
/* bits 3:6 in the PCS registers stores the channels polarity */
#define IGP01E1000_PHY_POLARITY_MASK 0x0078
/* IGP01E1000 GMII FIFO Register */
#define IGP01E1000_GMII_FLEX_SPD 0x10 /* Enable flexible speed
* on Link-Up */
#define IGP01E1000_GMII_SPD 0x20 /* Enable SPD */
/* IGP01E1000 Analog Register */
#define IGP01E1000_ANALOG_SPARE_FUSE_STATUS 0x20D1
#define IGP01E1000_ANALOG_FUSE_STATUS 0x20D0
#define IGP01E1000_ANALOG_FUSE_CONTROL 0x20DC
#define IGP01E1000_ANALOG_FUSE_BYPASS 0x20DE
#define IGP01E1000_ANALOG_FUSE_POLY_MASK 0xF000
#define IGP01E1000_ANALOG_FUSE_FINE_MASK 0x0F80
#define IGP01E1000_ANALOG_FUSE_COARSE_MASK 0x0070
#define IGP01E1000_ANALOG_SPARE_FUSE_ENABLED 0x0100
#define IGP01E1000_ANALOG_FUSE_ENABLE_SW_CONTROL 0x0002
#define IGP01E1000_ANALOG_FUSE_COARSE_THRESH 0x0040
#define IGP01E1000_ANALOG_FUSE_COARSE_10 0x0010
#define IGP01E1000_ANALOG_FUSE_FINE_1 0x0080
#define IGP01E1000_ANALOG_FUSE_FINE_10 0x0500
/* Bit definitions for valid PHY IDs. */
/* I = Integrated
* E = External
*/
#define M88E1000_E_PHY_ID 0x01410C50
#define M88E1000_I_PHY_ID 0x01410C30
#define M88E1011_I_PHY_ID 0x01410C20
#define IGP01E1000_I_PHY_ID 0x02A80380
#define M88E1000_12_PHY_ID M88E1000_E_PHY_ID
#define M88E1000_14_PHY_ID M88E1000_E_PHY_ID
#define M88E1011_I_REV_4 0x04
#define M88E1111_I_PHY_ID 0x01410CC0
#define L1LXT971A_PHY_ID 0x001378E0
/* Miscellaneous PHY bit definitions. */
#define PHY_PREAMBLE 0xFFFFFFFF
#define PHY_SOF 0x01
#define PHY_OP_READ 0x02
#define PHY_OP_WRITE 0x01
#define PHY_TURNAROUND 0x02
#define PHY_PREAMBLE_SIZE 32
#define MII_CR_SPEED_1000 0x0040
#define MII_CR_SPEED_100 0x2000
#define MII_CR_SPEED_10 0x0000
#define E1000_PHY_ADDRESS 0x01
#define PHY_AUTO_NEG_TIME 45 /* 4.5 Seconds */
#define PHY_FORCE_TIME 20 /* 2.0 Seconds */
#define PHY_REVISION_MASK 0xFFFFFFF0
#define DEVICE_SPEED_MASK 0x00000300 /* Device Ctrl Reg Speed Mask */
#define REG4_SPEED_MASK 0x01E0
#define REG9_SPEED_MASK 0x0300
#define ADVERTISE_10_HALF 0x0001
#define ADVERTISE_10_FULL 0x0002
#define ADVERTISE_100_HALF 0x0004
#define ADVERTISE_100_FULL 0x0008
#define ADVERTISE_1000_HALF 0x0010
#define ADVERTISE_1000_FULL 0x0020
#define AUTONEG_ADVERTISE_SPEED_DEFAULT 0x002F /* Everything but 1000-Half */
#define AUTONEG_ADVERTISE_10_100_ALL 0x000F /* All 10/100 speeds*/
#define AUTONEG_ADVERTISE_10_ALL 0x0003 /* 10Mbps Full & Half speeds*/
#endif /* _E1000_HW_H_ */
