# drivers/mtd/chips/Kconfig
# $Id: Kconfig,v 1.18 2005/11/07 11:14:22 gleixner Exp $
menu "RAM/ROM/Flash chip drivers"
depends on MTD!=n
config MTD_CFI
tristate "Detect flash chips by Common Flash Interface (CFI) probe"
depends on MTD
select MTD_GEN_PROBE
help
The Common Flash Interface specification was developed by Intel,
AMD and other flash manufactures that provides a universal method
for probing the capabilities of flash devices. If you wish to
support any device that is CFI-compliant, you need to enable this
option. Visit <http://www.amd.com/products/nvd/overview/cfi.html>
for more information on CFI.
config MTD_JEDECPROBE
tristate "Detect non-CFI AMD/JEDEC-compatible flash chips"
depends on MTD
select MTD_GEN_PROBE
help
This option enables JEDEC-style probing of flash chips which are not
compatible with the Common Flash Interface, but will use the common
CFI-targetted flash drivers for any chips which are identified which
are in fact compatible in all but the probe method. This actually
covers most AMD/Fujitsu-compatible chips, and will shortly cover also
non-CFI Intel chips (that code is in MTD CVS and should shortly be sent
for inclusion in Linus' tree)
config MTD_GEN_PROBE
tristate
select OBSOLETE_INTERMODULE
config MTD_CFI_ADV_OPTIONS
bool "Flash chip driver advanced configuration options"
depends on MTD_GEN_PROBE
help
If you need to specify a specific endianness for access to flash
chips, or if you wish to reduce the size of the kernel by including
support for only specific arrangements of flash chips, say 'Y'. This
option does not directly affect the code, but will enable other
configuration options which allow you to do so.
If unsure, say 'N'.
choice
prompt "Flash cmd/query data swapping"
depends on MTD_CFI_ADV_OPTIONS
default MTD_CFI_NOSWAP
config MTD_CFI_NOSWAP
bool "NO"
---help---
This option defines the way in which the CPU attempts to arrange
data bits when writing the 'magic' commands to the chips. Saying
'NO', which is the default when CONFIG_MTD_CFI_ADV_OPTIONS isn't
enabled, means that the CPU will not do any swapping; the chips
are expected to be wired to the CPU in 'host-endian' form.
Specific arrangements are possible with the BIG_ENDIAN_BYTE and
LITTLE_ENDIAN_BYTE, if the bytes are reversed.
If you have a LART, on which the data (and address) lines were
connected in a fashion which ensured that the nets were as short
as possible, resulting in a bit-shuffling which seems utterly
random to the untrained eye, you need the LART_ENDIAN_BYTE option.
Yes, there really exists something sicker than PDP-endian :)
config MTD_CFI_BE_BYTE_SWAP
bool "BIG_ENDIAN_BYTE"
config MTD_CFI_LE_BYTE_SWAP
bool "LITTLE_ENDIAN_BYTE"
endchoice
config MTD_CFI_GEOMETRY
bool "Specific CFI Flash geometry selection"
depends on MTD_CFI_ADV_OPTIONS
help
This option does not affect the code directly, but will enable
some other configuration options which would allow you to reduce
the size of the kernel by including support for only certain
arrangements of CFI chips. If unsure, say 'N' and all options
which are supported by the current code will be enabled.
config MTD_MAP_BANK_WIDTH_1
bool "Support 8-bit buswidth" if MTD_CFI_GEOMETRY
default y
help
If you wish to support CFI devices on a physical bus which is
8 bits wide, say 'Y'.
config MTD_MAP_BANK_WIDTH_2
bool "Support 16-bit buswidth" if MTD_CFI_GEOMETRY
default y
help
If you wish to support CFI devices on a physical bus which is
16 bits wide, say 'Y'.
config MTD_MAP_BANK_WIDTH_4
bool "Support 32-bit buswidth" if MTD_CFI_GEOMETRY
default y
help
If you wish to support CFI devices on a physical bus which is
32 bits wide, say 'Y'.
config MTD_MAP_BANK_WIDTH_8
bool "Support 64-bit buswidth" if MTD_CFI_GEOMETRY
default n
help
If you wish to support CFI devices on a physical bus which is
64 bits wide, say 'Y'.
config MTD_MAP_BANK_WIDTH_16
bool "Support 128-bit buswidth" if MTD_CFI_GEOMETRY
default n
help
If you wish to support CFI devices on a physical bus which is
128 bits wide, say 'Y'.
config MTD_MAP_BANK_WIDTH_32
bool "Support 256-bit buswidth" if MTD_CFI_GEOMETRY
default n
help
If you wish to support CFI devices on a physical bus which is
256 bits wide, say 'Y'.
config MTD_CFI_I1
bool "Support 1-chip flash interleave" if MTD_CFI_GEOMETRY
default y
help
If your flash chips are not interleaved - i.e. you only have one
flash chip addressed by each bus cycle, then say 'Y'.
config MTD_CFI_I2
bool "Support 2-chip flash interleave" if MTD_CFI_GEOMETRY
default y
help
If your flash chips are interleaved in pairs - i.e. you have two
flash chips addressed by each bus cycle, then say 'Y'.
config MTD_CFI_I4
bool "Support 4-chip flash interleave" if MTD_CFI_GEOMETRY
default n
help
If your flash chips are interleaved in fours - i.e. you have four
flash chips addressed by each bus cycle, then say 'Y'.
config MTD_CFI_I8
bool "Support 8-chip flash interleave" if MTD_CFI_GEOMETRY
default n
help
If your flash chips are interleaved in eights - i.e. you have eight
flash chips addressed by each bus cycle, then say 'Y'.
config MTD_OTP
bool "Protection Registers aka one-time programmable (OTP) bits"
depends on MTD_CFI_ADV_OPTIONS
default n
help
This enables support for reading, writing and locking so called
"Protection Registers" present on some flash chips.
A subset of them are pre-programmed at the factory with a
unique set of values. The rest is user-programmable.
The user-programmable Protection Registers contain one-time
programmable (OTP) bits; when programmed, register bits cannot be
erased. Each Protection Register can be accessed multiple times to
program individual bits, as long as the register remains unlocked.
Each Protection Register has an associated Lock Register bit. When a
Lock Register bit is programmed, the associated Protection Register
can only be read; it can no longer be programmed. Additionally,
because the Lock Register bits themselves are OTP, when programmed,
Lock Register bits cannot be erased. Therefore, when a Protection
Register is locked, it cannot be unlocked.
This feature should therefore be used with extreme care. Any mistake
in the programming of OTP bits will waste them.
config MTD_CFI_INTELEXT
tristate "Support for Intel/Sharp flash chips"
depends on MTD_GEN_PROBE
select MTD_CFI_UTIL
help
The Common Flash Interface defines a number of different command
sets which a CFI-compliant chip may claim to implement. This code
provides support for one of those command sets, used on Intel
StrataFlash and other parts.
config MTD_CFI_AMDSTD
tristate "Support for AMD/Fujitsu flash chips"
depends on MTD_GEN_PROBE
select MTD_CFI_UTIL
help
The Common Flash Interface defines a number of different command
sets which a CFI-compliant chip may claim to implement. This code
provides support for one of those command sets, used on chips
including the AMD Am29LV320.
config MTD_CFI_AMDSTD_RETRY
int "Retry failed commands (erase/program)"
depends on MTD_CFI_AMDSTD
default "0"
help
Some chips, when attached to a shared bus, don't properly filter
bus traffic that is destined to other devices. This broken
behavior causes erase and program sequences to be aborted when
the sequences are mixed with traffic for other devices.
SST49LF040 (and related) chips are know to be broken.
config MTD_CFI_AMDSTD_RETRY_MAX
int "Max retries of failed commands (erase/program)"
depends on MTD_CFI_AMDSTD_RETRY
default "0"
help
If you have an SST49LF040 (or related chip) then this value should
be set to at least 1. This can also be adjusted at driver load
time with the retry_cmd_max module parameter.
config MTD_CFI_STAA
tristate "Support for ST (Advanced Architecture) flash chips"
depends on MTD_GEN_PROBE
select MTD_CFI_UTIL
help
The Common Flash Interface defines a number of different command
sets which a CFI-compliant chip may claim to implement. This code
provides support for one of those command sets.
config MTD_CFI_UTIL
tristate
config MTD_RAM
tristate "Support for RAM chips in bus mapping"
depends on MTD
help
This option enables basic support for RAM chips accessed through
a bus mapping driver.
config MTD_ROM
tristate "Support for ROM chips in bus mapping"
depends on MTD
help
This option enables basic support for ROM chips accessed through
a bus mapping driver.
config MTD_ABSENT
tristate "Support for absent chips in bus mapping"
depends on MTD
help
This option enables support for a dummy probing driver used to
allocated placeholder MTD devices on systems that have socketed
or removable media. Use of this driver as a fallback chip probe
preserves the expected registration order of MTD device nodes on
the system regardless of media presence. Device nodes created
with this driver will return -ENODEV upon access.
config MTD_OBSOLETE_CHIPS
depends on MTD
bool "Older (theoretically obsoleted now) drivers for non-CFI chips"
help
This option does not enable any code directly, but will allow you to
select some other chip drivers which are now considered obsolete,
because the generic CONFIG_JEDECPROBE code above should now detect
the chips which are supported by these drivers, and allow the generic
CFI-compatible drivers to drive the chips. Say 'N' here unless you have
already tried the CONFIG_JEDECPROBE method and reported its failure
to the MTD mailing list at <linux-mtd@lists.infradead.org>
config MTD_AMDSTD
tristate "AMD compatible flash chip support (non-CFI)"
depends on MTD && MTD_OBSOLETE_CHIPS && BROKEN
help
This option enables support for flash chips using AMD-compatible
commands, including some which are not CFI-compatible and hence
cannot be used with the CONFIG_MTD_CFI_AMDSTD option.
It also works on AMD compatible chips that do conform to CFI.
config MTD_SHARP
tristate "pre-CFI Sharp chip support"
depends on MTD && MTD_OBSOLETE_CHIPS
help
This option enables support for flash chips using Sharp-compatible
commands, including some which are not CFI-compatible and hence
cannot be used with the CONFIG_MTD_CFI_INTELxxx options.
config MTD_JEDEC
tristate "JEDEC device support"
depends on MTD && MTD_OBSOLETE_CHIPS && BROKEN
help
Enable older older JEDEC flash interface devices for self
programming flash. It is commonly used in older AMD chips. It is
only called JEDEC because the JEDEC association
<http://www.jedec.org/> distributes the identification codes for the
chips.
config MTD_XIP
bool "XIP aware MTD support"
depends on !SMP && (MTD_CFI_INTELEXT || MTD_CFI_AMDSTD) && EXPERIMENTAL && ARM
default y if XIP_KERNEL
help
This allows MTD support to work with flash memory which is also
used for XIP purposes. If you're not sure what this is all about
then say N.
endmenu
