/* Driver for Realtek PCI-Express card reader
*
* Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2, or (at your option) any
* later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, see <http://www.gnu.org/licenses/>.
*
* Author:
* Wei WANG <wei_wang@realsil.com.cn>
* No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
*/
#include <linux/module.h>
#include <linux/bitops.h>
#include <linux/delay.h>
#include <linux/mfd/rtsx_pci.h>
#include "rtsx_pcr.h"
static u8 rtl8411_get_ic_version(struct rtsx_pcr *pcr)
{
u8 val;
rtsx_pci_read_register(pcr, SYS_VER, &val);
return val & 0x0F;
}
static int rtl8411_extra_init_hw(struct rtsx_pcr *pcr)
{
return rtsx_pci_write_register(pcr, CD_PAD_CTL,
CD_DISABLE_MASK | CD_AUTO_DISABLE, CD_ENABLE);
}
static int rtl8411_turn_on_led(struct rtsx_pcr *pcr)
{
return rtsx_pci_write_register(pcr, CARD_GPIO, 0x01, 0x00);
}
static int rtl8411_turn_off_led(struct rtsx_pcr *pcr)
{
return rtsx_pci_write_register(pcr, CARD_GPIO, 0x01, 0x01);
}
static int rtl8411_enable_auto_blink(struct rtsx_pcr *pcr)
{
return rtsx_pci_write_register(pcr, CARD_AUTO_BLINK, 0xFF, 0x0D);
}
static int rtl8411_disable_auto_blink(struct rtsx_pcr *pcr)
{
return rtsx_pci_write_register(pcr, CARD_AUTO_BLINK, 0x08, 0x00);
}
static int rtl8411_card_power_on(struct rtsx_pcr *pcr, int card)
{
int err;
rtsx_pci_init_cmd(pcr);
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_PWR_CTL,
BPP_POWER_MASK, BPP_POWER_5_PERCENT_ON);
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, LDO_CTL,
BPP_LDO_POWB, BPP_LDO_SUSPEND);
err = rtsx_pci_send_cmd(pcr, 100);
if (err < 0)
return err;
/* To avoid too large in-rush current */
udelay(150);
err = rtsx_pci_write_register(pcr, CARD_PWR_CTL,
BPP_POWER_MASK, BPP_POWER_10_PERCENT_ON);
if (err < 0)
return err;
udelay(150);
err = rtsx_pci_write_register(pcr, CARD_PWR_CTL,
BPP_POWER_MASK, BPP_POWER_15_PERCENT_ON);
if (err < 0)
return err;
udelay(150);
err = rtsx_pci_write_register(pcr, CARD_PWR_CTL,
BPP_POWER_MASK, BPP_POWER_ON);
if (err < 0)
return err;
return rtsx_pci_write_register(pcr, LDO_CTL, BPP_LDO_POWB, BPP_LDO_ON);
}
static int rtl8411_card_power_off(struct rtsx_pcr *pcr, int card)
{
int err;
err = rtsx_pci_write_register(pcr, CARD_PWR_CTL,
BPP_POWER_MASK, BPP_POWER_OFF);
if (err < 0)
return err;
return rtsx_pci_write_register(pcr, LDO_CTL,
BPP_LDO_POWB, BPP_LDO_SUSPEND);
}
static int rtl8411_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
{
u8 mask, val;
mask = (BPP_REG_TUNED18 << BPP_TUNED18_SHIFT_8411) | BPP_PAD_MASK;
if (voltage == OUTPUT_3V3)
val = (BPP_ASIC_3V3 << BPP_TUNED18_SHIFT_8411) | BPP_PAD_3V3;
else if (voltage == OUTPUT_1V8)
val = (BPP_ASIC_1V8 << BPP_TUNED18_SHIFT_8411) | BPP_PAD_1V8;
else
return -EINVAL;
return rtsx_pci_write_register(pcr, LDO_CTL, mask, val);
}
static unsigned int rtl8411_cd_deglitch(struct rtsx_pcr *pcr)
{
unsigned int card_exist;
card_exist = rtsx_pci_readl(pcr, RTSX_BIPR);
card_exist &= CARD_EXIST;
if (!card_exist) {
/* Enable card CD */
rtsx_pci_write_register(pcr, CD_PAD_CTL,
CD_DISABLE_MASK, CD_ENABLE);
/* Enable card interrupt */
rtsx_pci_write_register(pcr, EFUSE_CONTENT, 0xe0, 0x00);
return 0;
}
if (hweight32(card_exist) > 1) {
rtsx_pci_write_register(pcr, CARD_PWR_CTL,
BPP_POWER_MASK, BPP_POWER_5_PERCENT_ON);
msleep(100);
card_exist = rtsx_pci_readl(pcr, RTSX_BIPR);
if (card_exist & MS_EXIST)
card_exist = MS_EXIST;
else if (card_exist & SD_EXIST)
card_exist = SD_EXIST;
else
card_exist = 0;
rtsx_pci_write_register(pcr, CARD_PWR_CTL,
BPP_POWER_MASK, BPP_POWER_OFF);
dev_dbg(&(pcr->pci->dev),
"After CD deglitch, card_exist = 0x%x\n",
card_exist);
}
if (card_exist & MS_EXIST) {
/* Disable SD interrupt */
rtsx_pci_write_register(pcr, EFUSE_CONTENT, 0xe0, 0x40);
rtsx_pci_write_register(pcr, CD_PAD_CTL,
CD_DISABLE_MASK, MS_CD_EN_ONLY);
} else if (card_exist & SD_EXIST) {
/* Disable MS interrupt */
rtsx_pci_write_register(pcr, EFUSE_CONTENT, 0xe0, 0x80);
rtsx_pci_write_register(pcr, CD_PAD_CTL,
CD_DISABLE_MASK, SD_CD_EN_ONLY);
}
return card_exist;
}
static int rtl8411_conv_clk_and_div_n(int input, int dir)
{
int output;
if (dir == CLK_TO_DIV_N)
output = input * 4 / 5 - 2;
else
output = (input + 2) * 5 / 4;
return output;
}
static const struct pcr_ops rtl8411_pcr_ops = {
.extra_init_hw = rtl8411_extra_init_hw,
.optimize_phy = NULL,
.turn_on_led = rtl8411_turn_on_led,
.turn_off_led = rtl8411_turn_off_led,
.enable_auto_blink = rtl8411_enable_auto_blink,
.disable_auto_blink = rtl8411_disable_auto_blink,
.card_power_on = rtl8411_card_power_on,
.card_power_off = rtl8411_card_power_off,
.switch_output_voltage = rtl8411_switch_output_voltage,
.cd_deglitch = rtl8411_cd_deglitch,
.conv_clk_and_div_n = rtl8411_conv_clk_and_div_n,
};
/* SD Pull Control Enable:
* SD_DAT[3:0] ==> pull up
* SD_CD ==> pull up
* SD_WP ==> pull up
* SD_CMD ==> pull up
* SD_CLK ==> pull down
*/
static const u32 rtl8411_sd_pull_ctl_enable_tbl[] = {
RTSX_REG_PAIR(CARD_PULL_CTL1, 0xAA),
RTSX_REG_PAIR(CARD_PULL_CTL2, 0xAA),
RTSX_REG_PAIR(CARD_PULL_CTL3, 0xA9),
RTSX_REG_PAIR(CARD_PULL_CTL4, 0x09),
RTSX_REG_PAIR(CARD_PULL_CTL5, 0x09),
RTSX_REG_PAIR(CARD_PULL_CTL6, 0x04),
0,
};
/* SD Pull Control Disable:
* SD_DAT[3:0] ==> pull down
* SD_CD ==> pull up
* SD_WP ==> pull down
* SD_CMD ==> pull down
* SD_CLK ==> pull down
*/
static const u32 rtl8411_sd_pull_ctl_disable_tbl[] = {
RTSX_REG_PAIR(CARD_PULL_CTL1, 0x65),
RTSX_REG_PAIR(CARD_PULL_CTL2, 0x55),
RTSX_REG_PAIR(CARD_PULL_CTL3, 0x95),
RTSX_REG_PAIR(CARD_PULL_CTL4, 0x09),
RTSX_REG_PAIR(CARD_PULL_CTL5, 0x05),
RTSX_REG_PAIR(CARD_PULL_CTL6, 0x04),
0,
};
/* MS Pull Control Enable:
* MS CD ==> pull up
* others ==> pull down
*/
static const u32 rtl8411_ms_pull_ctl_enable_tbl[] = {
RTSX_REG_PAIR(CARD_PULL_CTL1, 0x65),
RTSX_REG_PAIR(CARD_PULL_CTL2, 0x55),
RTSX_REG_PAIR(CARD_PULL_CTL3, 0x95),
RTSX_REG_PAIR(CARD_PULL_CTL4, 0x05),
RTSX_REG_PAIR(CARD_PULL_CTL5, 0x05),
RTSX_REG_PAIR(CARD_PULL_CTL6, 0x04),
0,
};
/* MS Pull Control Disable:
* MS CD ==> pull up
* others ==> pull down
*/
static const u32 rtl8411_ms_pull_ctl_disable_tbl[] = {
RTSX_REG_PAIR(CARD_PULL_CTL1, 0x65),
RTSX_REG_PAIR(CARD_PULL_CTL2, 0x55),
RTSX_REG_PAIR(CARD_PULL_CTL3, 0x95),
RTSX_REG_PAIR(CARD_PULL_CTL4, 0x09),
RTSX_REG_PAIR(CARD_PULL_CTL5, 0x05),
RTSX_REG_PAIR(CARD_PULL_CTL6, 0x04),
0,
};
void rtl8411_init_params(struct rtsx_pcr *pcr)
{
pcr->extra_caps = EXTRA_CAPS_SD_SDR50 | EXTRA_CAPS_SD_SDR104;
pcr->num_slots = 2;
pcr->ops = &rtl8411_pcr_ops;
pcr->ic_version = rtl8411_get_ic_version(pcr);
pcr->sd_pull_ctl_enable_tbl = rtl8411_sd_pull_ctl_enable_tbl;
pcr->sd_pull_ctl_disable_tbl = rtl8411_sd_pull_ctl_disable_tbl;
pcr->ms_pull_ctl_enable_tbl = rtl8411_ms_pull_ctl_enable_tbl;
pcr->ms_pull_ctl_disable_tbl = rtl8411_ms_pull_ctl_disable_tbl;
}
