/*
* linux/drivers/message/fusion/mptioctl.h
* Fusion MPT misc device (ioctl) driver.
* For use with PCI chip/adapter(s):
* LSIFC9xx/LSI409xx Fibre Channel
* running LSI Logic Fusion MPT (Message Passing Technology) firmware.
*
* Copyright (c) 1999-2005 LSI Logic Corporation
* (mailto:mpt_linux_developer@lsil.com)
*
*/
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; version 2 of the License.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
NO WARRANTY
THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
solely responsible for determining the appropriateness of using and
distributing the Program and assumes all risks associated with its
exercise of rights under this Agreement, including but not limited to
the risks and costs of program errors, damage to or loss of data,
programs or equipment, and unavailability or interruption of operations.
DISCLAIMER OF LIABILITY
NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef MPTCTL_H_INCLUDED
#define MPTCTL_H_INCLUDED
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
#include "linux/version.h"
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
*
*/
#define MPT_MISCDEV_BASENAME "mptctl"
#define MPT_MISCDEV_PATHNAME "/dev/" MPT_MISCDEV_BASENAME
#define MPT_PRODUCT_LENGTH 12
/*
* Generic MPT Control IOCTLs and structures
*/
#define MPT_MAGIC_NUMBER 'm'
#define MPTRWPERF _IOWR(MPT_MAGIC_NUMBER,0,struct mpt_raw_r_w)
#define MPTFWDOWNLOAD _IOWR(MPT_MAGIC_NUMBER,15,struct mpt_fw_xfer)
#define MPTCOMMAND _IOWR(MPT_MAGIC_NUMBER,20,struct mpt_ioctl_command)
#if defined(__KERNEL__) && defined(CONFIG_COMPAT)
#define MPTFWDOWNLOAD32 _IOWR(MPT_MAGIC_NUMBER,15,struct mpt_fw_xfer32)
#define MPTCOMMAND32 _IOWR(MPT_MAGIC_NUMBER,20,struct mpt_ioctl_command32)
#endif
#define MPTIOCINFO _IOWR(MPT_MAGIC_NUMBER,17,struct mpt_ioctl_iocinfo)
#define MPTIOCINFO1 _IOWR(MPT_MAGIC_NUMBER,17,struct mpt_ioctl_iocinfo_rev0)
#define MPTIOCINFO2 _IOWR(MPT_MAGIC_NUMBER,17,struct mpt_ioctl_iocinfo_rev1)
#define MPTTARGETINFO _IOWR(MPT_MAGIC_NUMBER,18,struct mpt_ioctl_targetinfo)
#define MPTTEST _IOWR(MPT_MAGIC_NUMBER,19,struct mpt_ioctl_test)
#define MPTEVENTQUERY _IOWR(MPT_MAGIC_NUMBER,21,struct mpt_ioctl_eventquery)
#define MPTEVENTENABLE _IOWR(MPT_MAGIC_NUMBER,22,struct mpt_ioctl_eventenable)
#define MPTEVENTREPORT _IOWR(MPT_MAGIC_NUMBER,23,struct mpt_ioctl_eventreport)
#define MPTHARDRESET _IOWR(MPT_MAGIC_NUMBER,24,struct mpt_ioctl_diag_reset)
#define MPTFWREPLACE _IOWR(MPT_MAGIC_NUMBER,25,struct mpt_ioctl_replace_fw)
/*
* SPARC PLATFORM REMARKS:
* IOCTL data structures that contain pointers
* will have different sizes in the driver and applications
* (as the app. will not use 8-byte pointers).
* Apps should use MPTFWDOWNLOAD and MPTCOMMAND.
* The driver will convert data from
* mpt_fw_xfer32 (mpt_ioctl_command32) to mpt_fw_xfer (mpt_ioctl_command)
* internally.
*
* If data structures change size, must handle as in IOCGETINFO.
*/
struct mpt_fw_xfer {
unsigned int iocnum; /* IOC unit number */
unsigned int fwlen;
void __user *bufp; /* Pointer to firmware buffer */
};
#if defined(__KERNEL__) && defined(CONFIG_COMPAT)
struct mpt_fw_xfer32 {
unsigned int iocnum;
unsigned int fwlen;
u32 bufp;
};
#endif /*}*/
/*
* IOCTL header structure.
* iocnum - must be defined.
* port - must be defined for all IOCTL commands other than MPTIOCINFO
* maxDataSize - ignored on MPTCOMMAND commands
* - ignored on MPTFWREPLACE commands
* - on query commands, reports the maximum number of bytes to be returned
* to the host driver (count includes the header).
* That is, set to sizeof(struct mpt_ioctl_iocinfo) for fixed sized commands.
* Set to sizeof(struct mpt_ioctl_targetinfo) + datasize for variable
* sized commands. (MPTTARGETINFO, MPTEVENTREPORT)
*/
typedef struct _mpt_ioctl_header {
unsigned int iocnum; /* IOC unit number */
unsigned int port; /* IOC port number */
int maxDataSize; /* Maximum Num. bytes to transfer on read */
} mpt_ioctl_header;
/*
* Issue a diagnostic reset
*/
struct mpt_ioctl_diag_reset {
mpt_ioctl_header hdr;
};
/*
* PCI bus/device/function information structure.
*/
struct mpt_ioctl_pci_info {
union {
struct {
unsigned int deviceNumber : 5;
unsigned int functionNumber : 3;
unsigned int busNumber : 24;
} bits;
unsigned int asUlong;
} u;
};
struct mpt_ioctl_pci_info2 {
union {
struct {
unsigned int deviceNumber : 5;
unsigned int functionNumber : 3;
unsigned int busNumber : 24;
} bits;
unsigned int asUlong;
} u;
int segmentID;
};
/*
* Adapter Information Page
* Read only.
* Data starts at offset 0xC
*/
#define MPT_IOCTL_INTERFACE_FC (0x01)
#define MPT_IOCTL_INTERFACE_SCSI (0x00)
#define MPT_IOCTL_VERSION_LENGTH (32)
struct mpt_ioctl_iocinfo {
mpt_ioctl_header hdr;
int adapterType; /* SCSI or FCP */
int port; /* port number */
int pciId; /* PCI Id. */
int hwRev; /* hardware revision */
int subSystemDevice; /* PCI subsystem Device ID */
int subSystemVendor; /* PCI subsystem Vendor ID */
int numDevices; /* number of devices */
int FWVersion; /* FW Version (integer) */
int BIOSVersion; /* BIOS Version (integer) */
char driverVersion[MPT_IOCTL_VERSION_LENGTH]; /* Driver Version (string) */
char busChangeEvent;
char hostId;
char rsvd[2];
struct mpt_ioctl_pci_info2 pciInfo; /* Added Rev 2 */
};
struct mpt_ioctl_iocinfo_rev1 {
mpt_ioctl_header hdr;
int adapterType; /* SCSI or FCP */
int port; /* port number */
int pciId; /* PCI Id. */
int hwRev; /* hardware revision */
int subSystemDevice; /* PCI subsystem Device ID */
int subSystemVendor; /* PCI subsystem Vendor ID */
int numDevices; /* number of devices */
int FWVersion; /* FW Version (integer) */
int BIOSVersion; /* BIOS Version (integer) */
char driverVersion[MPT_IOCTL_VERSION_LENGTH]; /* Driver Version (string) */
char busChangeEvent;
char hostId;
char rsvd[2];
struct mpt_ioctl_pci_info pciInfo; /* Added Rev 1 */
};
/* Original structure, must always accept these
* IOCTLs. 4 byte pads can occur based on arch with
* above structure. Wish to re-align, but cannot.
*/
struct mpt_ioctl_iocinfo_rev0 {
mpt_ioctl_header hdr;
int adapterType; /* SCSI or FCP */
int port; /* port number */
int pciId; /* PCI Id. */
int hwRev; /* hardware revision */
int subSystemDevice; /* PCI subsystem Device ID */
int subSystemVendor; /* PCI subsystem Vendor ID */
int numDevices; /* number of devices */
int FWVersion; /* FW Version (integer) */
int BIOSVersion; /* BIOS Version (integer) */
char driverVersion[MPT_IOCTL_VERSION_LENGTH]; /* Driver Version (string) */
char busChangeEvent;
char hostId;
char rsvd[2];
};
/*
* Device Information Page
* Report the number of, and ids of, all targets
* on this IOC. The ids array is a packed structure
* of the known targetInfo.
* bits 31-24: reserved
* 23-16: LUN
* 15- 8: Bus Number
* 7- 0: Target ID
*/
struct mpt_ioctl_targetinfo {
mpt_ioctl_header hdr;
int numDevices; /* Num targets on this ioc */
int targetInfo[1];
};
/*
* Event reporting IOCTL's. These IOCTL's will
* use the following defines:
*/
struct mpt_ioctl_eventquery {
mpt_ioctl_header hdr;
unsigned short eventEntries;
unsigned short reserved;
unsigned int eventTypes;
};
struct mpt_ioctl_eventenable {
mpt_ioctl_header hdr;
unsigned int eventTypes;
};
#ifndef __KERNEL__
typedef struct {
uint event;
uint eventContext;
uint data[2];
} MPT_IOCTL_EVENTS;
#endif
struct mpt_ioctl_eventreport {
mpt_ioctl_header hdr;
MPT_IOCTL_EVENTS eventData[1];
};
#define MPT_MAX_NAME 32
struct mpt_ioctl_test {
mpt_ioctl_header hdr;
u8 name[MPT_MAX_NAME];
int chip_type;
u8 product [MPT_PRODUCT_LENGTH];
};
/* Replace the FW image cached in host driver memory
* newImageSize - image size in bytes
* newImage - first byte of the new image
*/
typedef struct mpt_ioctl_replace_fw {
mpt_ioctl_header hdr;
int newImageSize;
u8 newImage[1];
} mpt_ioctl_replace_fw_t;
/* General MPT Pass through data strucutre
*
* iocnum
* timeout - in seconds, command timeout. If 0, set by driver to
* default value.
* replyFrameBufPtr - reply location
* dataInBufPtr - destination for read
* dataOutBufPtr - data source for write
* senseDataPtr - sense data location
* maxReplyBytes - maximum number of reply bytes to be sent to app.
* dataInSize - num bytes for data transfer in (read)
* dataOutSize - num bytes for data transfer out (write)
* dataSgeOffset - offset in words from the start of the request message
* to the first SGL
* MF[1];
*
* Remark: Some config pages have bi-directional transfer,
* both a read and a write. The basic structure allows for
* a bidirectional set up. Normal messages will have one or
* both of these buffers NULL.
*/
struct mpt_ioctl_command {
mpt_ioctl_header hdr;
int timeout; /* optional (seconds) */
char __user *replyFrameBufPtr;
char __user *dataInBufPtr;
char __user *dataOutBufPtr;
char __user *senseDataPtr;
int maxReplyBytes;
int dataInSize;
int dataOutSize;
int maxSenseBytes;
int dataSgeOffset;
char MF[1];
};
/*
* SPARC PLATFORM: See earlier remark.
*/
#if defined(__KERNEL__) && defined(CONFIG_COMPAT)
struct mpt_ioctl_command32 {
mpt_ioctl_header hdr;
int timeout;
u32 replyFrameBufPtr;
u32 dataInBufPtr;
u32 dataOutBufPtr;
u32 senseDataPtr;
int maxReplyBytes;
int dataInSize;
int dataOutSize;
int maxSenseBytes;
int dataSgeOffset;
char MF[1];
};
#endif /*}*/
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* HP Specific IOCTL Defines and Structures
*/
#define CPQFCTS_IOC_MAGIC 'Z'
#define HP_IOC_MAGIC 'Z'
#define HP_GETHOSTINFO _IOR(HP_IOC_MAGIC, 20, hp_host_info_t)
#define HP_GETHOSTINFO1 _IOR(HP_IOC_MAGIC, 20, hp_host_info_rev0_t)
#define HP_GETTARGETINFO _IOR(HP_IOC_MAGIC, 21, hp_target_info_t)
/* All HP IOCTLs must include this header
*/
typedef struct _hp_header {
unsigned int iocnum;
unsigned int host;
unsigned int channel;
unsigned int id;
unsigned int lun;
} hp_header_t;
/*
* Header:
* iocnum required (input)
* host ignored
* channe ignored
* id ignored
* lun ignored
*/
typedef struct _hp_host_info {
hp_header_t hdr;
u16 vendor;
u16 device;
u16 subsystem_vendor;
u16 subsystem_id;
u8 devfn;
u8 bus;
ushort host_no; /* SCSI Host number, if scsi driver not loaded*/
u8 fw_version[16]; /* string */
u8 serial_number[24]; /* string */
u32 ioc_status;
u32 bus_phys_width;
u32 base_io_addr;
u32 rsvd;
unsigned int hard_resets; /* driver initiated resets */
unsigned int soft_resets; /* ioc, external resets */
unsigned int timeouts; /* num timeouts */
} hp_host_info_t;
/* replace ulongs with uints, need to preserve backwards
* compatibility.
*/
typedef struct _hp_host_info_rev0 {
hp_header_t hdr;
u16 vendor;
u16 device;
u16 subsystem_vendor;
u16 subsystem_id;
u8 devfn;
u8 bus;
ushort host_no; /* SCSI Host number, if scsi driver not loaded*/
u8 fw_version[16]; /* string */
u8 serial_number[24]; /* string */
u32 ioc_status;
u32 bus_phys_width;
u32 base_io_addr;
u32 rsvd;
unsigned long hard_resets; /* driver initiated resets */
unsigned long soft_resets; /* ioc, external resets */
unsigned long timeouts; /* num timeouts */
} hp_host_info_rev0_t;
/*
* Header:
* iocnum required (input)
* host required
* channel required (bus number)
* id required
* lun ignored
*
* All error values between 0 and 0xFFFF in size.
*/
typedef struct _hp_target_info {
hp_header_t hdr;
u32 parity_errors;
u32 phase_errors;
u32 select_timeouts;
u32 message_rejects;
u32 negotiated_speed;
u8 negotiated_width;
u8 rsvd[7]; /* 8 byte alignment */
} hp_target_info_t;
#define HP_STATUS_OTHER 1
#define HP_STATUS_OK 2
#define HP_STATUS_FAILED 3
#define HP_BUS_WIDTH_UNK 1
#define HP_BUS_WIDTH_8 2
#define HP_BUS_WIDTH_16 3
#define HP_BUS_WIDTH_32 4
#define HP_DEV_SPEED_ASYNC 2
#define HP_DEV_SPEED_FAST 3
#define HP_DEV_SPEED_ULTRA 4
#define HP_DEV_SPEED_ULTRA2 5
#define HP_DEV_SPEED_ULTRA160 6
#define HP_DEV_SPEED_SCSI1 7
#define HP_DEV_SPEED_ULTRA320 8
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
#endif
