/*
* bt856 - BT856A Digital Video Encoder (Rockwell Part)
*
* Copyright (C) 1999 Mike Bernson <mike@mlb.org>
* Copyright (C) 1998 Dave Perks <dperks@ibm.net>
*
* Modifications for LML33/DC10plus unified driver
* Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx>
*
* This code was modify/ported from the saa7111 driver written
* by Dave Perks.
*
* Changes by Ronald Bultje <rbultje@ronald.bitfreak.net>
* - moved over to linux>=2.4.x i2c protocol (9/9/2002)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/fs.h>
#include <linux/kernel.h>
#include <linux/major.h>
#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/pci.h>
#include <linux/signal.h>
#include <asm/io.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <linux/sched.h>
#include <linux/types.h>
#include <linux/videodev.h>
#include <asm/uaccess.h>
MODULE_DESCRIPTION("Brooktree-856A video encoder driver");
MODULE_AUTHOR("Mike Bernson & Dave Perks");
MODULE_LICENSE("GPL");
#include <linux/i2c.h>
#define I2C_NAME(s) (s)->name
#include <linux/video_encoder.h>
static int debug = 0;
module_param(debug, int, 0);
MODULE_PARM_DESC(debug, "Debug level (0-1)");
#define dprintk(num, format, args...) \
do { \
if (debug >= num) \
printk(format, ##args); \
} while (0)
/* ----------------------------------------------------------------------- */
#define REG_OFFSET 0xDA
#define BT856_NR_REG 6
struct bt856 {
unsigned char reg[BT856_NR_REG];
int norm;
int enable;
};
#define I2C_BT856 0x88
/* ----------------------------------------------------------------------- */
static inline int
bt856_write (struct i2c_client *client,
u8 reg,
u8 value)
{
struct bt856 *encoder = i2c_get_clientdata(client);
encoder->reg[reg - REG_OFFSET] = value;
return i2c_smbus_write_byte_data(client, reg, value);
}
static inline int
bt856_setbit (struct i2c_client *client,
u8 reg,
u8 bit,
u8 value)
{
struct bt856 *encoder = i2c_get_clientdata(client);
return bt856_write(client, reg,
(encoder->
reg[reg - REG_OFFSET] & ~(1 << bit)) |
(value ? (1 << bit) : 0));
}
static void
bt856_dump (struct i2c_client *client)
{
int i;
struct bt856 *encoder = i2c_get_clientdata(client);
printk(KERN_INFO "%s: register dump:", I2C_NAME(client));
for (i = 0; i < BT856_NR_REG; i += 2)
printk(" %02x", encoder->reg[i]);
printk("\n");
}
/* ----------------------------------------------------------------------- */
static int
bt856_command (struct i2c_client *client,
unsigned int cmd,
void *arg)
{
struct bt856 *encoder = i2c_get_clientdata(client);
switch (cmd) {
case 0:
/* This is just for testing!!! */
dprintk(1, KERN_INFO "bt856: init\n");
bt856_write(client, 0xdc, 0x18);
bt856_write(client, 0xda, 0);
bt856_write(client, 0xde, 0);
bt856_setbit(client, 0xdc, 3, 1);
//bt856_setbit(client, 0xdc, 6, 0);
bt856_setbit(client, 0xdc, 4, 1);
switch (encoder->norm) {
case VIDEO_MODE_NTSC:
bt856_setbit(client, 0xdc, 2, 0);
break;
case VIDEO_MODE_PAL:
bt856_setbit(client, 0xdc, 2, 1);
break;
}
bt856_setbit(client, 0xdc, 1, 1);
bt856_setbit(client, 0xde, 4, 0);
bt856_setbit(client, 0xde, 3, 1);
if (debug != 0)
bt856_dump(client);
break;
case ENCODER_GET_CAPABILITIES:
{
struct video_encoder_capability *cap = arg;
dprintk(1, KERN_INFO "%s: get capabilities\n",
I2C_NAME(client));
cap->flags = VIDEO_ENCODER_PAL |
VIDEO_ENCODER_NTSC |
VIDEO_ENCODER_CCIR;
cap->inputs = 2;
cap->outputs = 1;
}
break;
case ENCODER_SET_NORM:
{
int *iarg = arg;
dprintk(1, KERN_INFO "%s: set norm %d\n", I2C_NAME(client),
*iarg);
switch (*iarg) {
case VIDEO_MODE_NTSC:
bt856_setbit(client, 0xdc, 2, 0);
break;
case VIDEO_MODE_PAL:
bt856_setbit(client, 0xdc, 2, 1);
bt856_setbit(client, 0xda, 0, 0);
//bt856_setbit(client, 0xda, 0, 1);
break;
default:
return -EINVAL;
}
encoder->norm = *iarg;
if (debug != 0)
bt856_dump(client);
}
break;
case ENCODER_SET_INPUT:
{
int *iarg = arg;
dprintk(1, KERN_INFO "%s: set input %d\n", I2C_NAME(client),
*iarg);
/* We only have video bus.
* iarg = 0: input is from bt819
* iarg = 1: input is from ZR36060 */
switch (*iarg) {
case 0:
bt856_setbit(client, 0xde, 4, 0);
bt856_setbit(client, 0xde, 3, 1);
bt856_setbit(client, 0xdc, 3, 1);
bt856_setbit(client, 0xdc, 6, 0);
break;
case 1:
bt856_setbit(client, 0xde, 4, 0);
bt856_setbit(client, 0xde, 3, 1);
bt856_setbit(client, 0xdc, 3, 1);
bt856_setbit(client, 0xdc, 6, 1);
break;
case 2: // Color bar
bt856_setbit(client, 0xdc, 3, 0);
bt856_setbit(client, 0xde, 4, 1);
break;
default:
return -EINVAL;
}
if (debug != 0)
bt856_dump(client);
}
break;
case ENCODER_SET_OUTPUT:
{
int *iarg = arg;
dprintk(1, KERN_INFO "%s: set output %d\n", I2C_NAME(client),
*iarg);
/* not much choice of outputs */
if (*iarg != 0) {
return -EINVAL;
}
}
break;
case ENCODER_ENABLE_OUTPUT:
{
int *iarg = arg;
encoder->enable = !!*iarg;
dprintk(1, KERN_INFO "%s: enable output %d\n",
I2C_NAME(client), encoder->enable);
}
break;
default:
return -EINVAL;
}
return 0;
}
/* ----------------------------------------------------------------------- */
/*
* Generic i2c probe
* concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1'
*/
static unsigned short normal_i2c[] = { I2C_BT856 >> 1, I2C_CLIENT_END };
static unsigned short ignore = I2C_CLIENT_END;
static struct i2c_client_address_data addr_data = {
.normal_i2c = normal_i2c,
.probe = &ignore,
.ignore = &ignore,
};
static struct i2c_driver i2c_driver_bt856;
static int
bt856_detect_client (struct i2c_adapter *adapter,
int address,
int kind)
{
int i;
struct i2c_client *client;
struct bt856 *encoder;
dprintk(1,
KERN_INFO
"bt856.c: detecting bt856 client on address 0x%x\n",
address << 1);
/* Check if the adapter supports the needed features */
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return 0;
client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
if (client == 0)
return -ENOMEM;
client->addr = address;
client->adapter = adapter;
client->driver = &i2c_driver_bt856;
strlcpy(I2C_NAME(client), "bt856", sizeof(I2C_NAME(client)));
encoder = kzalloc(sizeof(struct bt856), GFP_KERNEL);
if (encoder == NULL) {
kfree(client);
return -ENOMEM;
}
encoder->norm = VIDEO_MODE_NTSC;
encoder->enable = 1;
i2c_set_clientdata(client, encoder);
i = i2c_attach_client(client);
if (i) {
kfree(client);
kfree(encoder);
return i;
}
bt856_write(client, 0xdc, 0x18);
bt856_write(client, 0xda, 0);
bt856_write(client, 0xde, 0);
bt856_setbit(client, 0xdc, 3, 1);
//bt856_setbit(client, 0xdc, 6, 0);
bt856_setbit(client, 0xdc, 4, 1);
switch (encoder->norm) {
case VIDEO_MODE_NTSC:
bt856_setbit(client, 0xdc, 2, 0);
break;
case VIDEO_MODE_PAL:
bt856_setbit(client, 0xdc, 2, 1);
break;
}
bt856_setbit(client, 0xdc, 1, 1);
bt856_setbit(client, 0xde, 4, 0);
bt856_setbit(client, 0xde, 3, 1);
if (debug != 0)
bt856_dump(client);
dprintk(1, KERN_INFO "%s_attach: at address 0x%x\n", I2C_NAME(client),
client->addr << 1);
return 0;
}
static int
bt856_attach_adapter (struct i2c_adapter *adapter)
{
dprintk(1,
KERN_INFO
"bt856.c: starting probe for adapter %s (0x%x)\n",
I2C_NAME(adapter), adapter->id);
return i2c_probe(adapter, &addr_data, &bt856_detect_client);
}
static int
bt856_detach_client (struct i2c_client *client)
{
struct bt856 *encoder = i2c_get_clientdata(client);
int err;
err = i2c_detach_client(client);
if (err) {
return err;
}
kfree(encoder);
kfree(client);
return 0;
}
/* ----------------------------------------------------------------------- */
static struct i2c_driver i2c_driver_bt856 = {
.driver = {
.name = "bt856",
},
.id = I2C_DRIVERID_BT856,
.attach_adapter = bt856_attach_adapter,
.detach_client = bt856_detach_client,
.command = bt856_command,
};
static int __init
bt856_init (void)
{
return i2c_add_driver(&i2c_driver_bt856);
}
static void __exit
bt856_exit (void)
{
i2c_del_driver(&i2c_driver_bt856);
}
module_init(bt856_init);
module_exit(bt856_exit);
