/* DVB USB compliant Linux driver for the Friio USB2.0 ISDB-T receiver.
*
* Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
*
* This module is based off the the gl861 and vp702x modules.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation, version 2.
*
* see Documentation/dvb/README.dvb-usb for more information
*/
#include "friio.h"
/* debug */
int dvb_usb_friio_debug;
module_param_named(debug, dvb_usb_friio_debug, int, 0644);
MODULE_PARM_DESC(debug,
"set debugging level (1=info,2=xfer,4=rc,8=fe (or-able))."
DVB_USB_DEBUG_STATUS);
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
/**
* Indirect I2C access to the PLL via FE.
* whole I2C protocol data to the PLL is sent via the FE's I2C register.
* This is done by a control msg to the FE with the I2C data accompanied, and
* a specific USB request number is assigned for that purpose.
*
* this func sends wbuf[1..] to the I2C register wbuf[0] at addr (= at FE).
* TODO: refoctored, smarter i2c functions.
*/
static int gl861_i2c_ctrlmsg_data(struct dvb_usb_device *d, u8 addr,
u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen)
{
u16 index = wbuf[0]; /* must be JDVBT90502_2ND_I2C_REG(=0xFE) */
u16 value = addr << (8 + 1);
int wo = (rbuf == NULL || rlen == 0); /* write only */
u8 req, type;
deb_xfer("write to PLL:0x%02x via FE reg:0x%02x, len:%d\n",
wbuf[1], wbuf[0], wlen - 1);
if (wo && wlen >= 2) {
req = GL861_REQ_I2C_DATA_CTRL_WRITE;
type = GL861_WRITE;
udelay(20);
return usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0),
req, type, value, index,
&wbuf[1], wlen - 1, 2000);
}
deb_xfer("not supported ctrl-msg, aborting.");
return -EINVAL;
}
/* normal I2C access (without extra data arguments).
* write to the register wbuf[0] at I2C address addr with the value wbuf[1],
* or read from the register wbuf[0].
* register address can be 16bit (wbuf[2]<<8 | wbuf[0]) if wlen==3
*/
static int gl861_i2c_msg(struct dvb_usb_device *d, u8 addr,
u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen)
{
u16 index;
u16 value = addr << (8 + 1);
int wo = (rbuf == NULL || rlen == 0); /* write-only */
u8 req, type;
unsigned int pipe;
/* special case for the indirect I2C access to the PLL via FE, */
if (addr == friio_fe_config.demod_address &&
wbuf[0] == JDVBT90502_2ND_I2C_REG)
return gl861_i2c_ctrlmsg_data(d, addr, wbuf, wlen, rbuf, rlen);
if (wo) {
req = GL861_REQ_I2C_WRITE;
type = GL861_WRITE;
pipe = usb_sndctrlpipe(d->udev, 0);
} else { /* rw */
req = GL861_REQ_I2C_READ;
type = GL861_READ;
pipe = usb_rcvctrlpipe(d->udev, 0);
}
switch (wlen) {
case 1:
index = wbuf[0];
break;
case 2:
index = wbuf[0];
value = value + wbuf[1];
break;
case 3:
/* special case for 16bit register-address */
index = (wbuf[2] << 8) | wbuf[0];
value = value + wbuf[1];
break;
default:
deb_xfer("wlen = %x, aborting.", wlen);
return -EINVAL;
}
msleep(1);
return usb_control_msg(d->udev, pipe, req, type,
value, index, rbuf, rlen, 2000);
}
/* I2C */
static int gl861_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
int num)
{
struct dvb_usb_device *d = i2c_get_adapdata(adap);
int i;
if (num > 2)
return -EINVAL;
if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
return -EAGAIN;
for (i = 0; i < num; i++) {
/* write/read request */
if (i + 1 < num && (msg[i + 1].flags & I2C_M_RD)) {
if (gl861_i2c_msg(d, msg[i].addr,
msg[i].buf, msg[i].len,
msg[i + 1].buf, msg[i + 1].len) < 0)
break;
i++;
} else
if (gl861_i2c_msg(d, msg[i].addr, msg[i].buf,
msg[i].len, NULL, 0) < 0)
break;
}
mutex_unlock(&d->i2c_mutex);
return i;
}
static u32 gl861_i2c_func(struct i2c_adapter *adapter)
{
return I2C_FUNC_I2C;
}
static int friio_ext_ctl(struct dvb_usb_adapter *adap,
u32 sat_color, int lnb_on)
{
int i;
int ret;
struct i2c_msg msg;
u8 *buf;
u32 mask;
u8 lnb = (lnb_on) ? FRIIO_CTL_LNB : 0;
buf = kmalloc(2, GFP_KERNEL);
if (!buf)
return -ENOMEM;
msg.addr = 0x00;
msg.flags = 0;
msg.len = 2;
msg.buf = buf;
buf[0] = 0x00;
/* send 2bit header (&B10) */
buf[1] = lnb | FRIIO_CTL_LED | FRIIO_CTL_STROBE;
ret = gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
buf[1] |= FRIIO_CTL_CLK;
ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
buf[1] = lnb | FRIIO_CTL_STROBE;
ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
buf[1] |= FRIIO_CTL_CLK;
ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
/* send 32bit(satur, R, G, B) data in serial */
mask = 1 << 31;
for (i = 0; i < 32; i++) {
buf[1] = lnb | FRIIO_CTL_STROBE;
if (sat_color & mask)
buf[1] |= FRIIO_CTL_LED;
ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
buf[1] |= FRIIO_CTL_CLK;
ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
mask >>= 1;
}
/* set the strobe off */
buf[1] = lnb;
ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
buf[1] |= FRIIO_CTL_CLK;
ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
kfree(buf);
return (ret == 70);
}
static int friio_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff);
/* TODO: move these init cmds to the FE's init routine? */
static u8 streaming_init_cmds[][2] = {
{0x33, 0x08},
{0x37, 0x40},
{0x3A, 0x1F},
{0x3B, 0xFF},
{0x3C, 0x1F},
{0x3D, 0xFF},
{0x38, 0x00},
{0x35, 0x00},
{0x39, 0x00},
{0x36, 0x00},
};
static int cmdlen = sizeof(streaming_init_cmds) / 2;
/*
* Command sequence in this init function is a replay
* of the captured USB commands from the Windows proprietary driver.
*/
static int friio_initialize(struct dvb_usb_device *d)
{
int ret;
int i;
int retry = 0;
u8 *rbuf, *wbuf;
deb_info("%s called.\n", __func__);
wbuf = kmalloc(3, GFP_KERNEL);
if (!wbuf)
return -ENOMEM;
rbuf = kmalloc(2, GFP_KERNEL);
if (!rbuf) {
kfree(wbuf);
return -ENOMEM;
}
/* use gl861_i2c_msg instead of gl861_i2c_xfer(), */
/* because the i2c device is not set up yet. */
wbuf[0] = 0x11;
wbuf[1] = 0x02;
ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0);
if (ret < 0)
goto error;
msleep(2);
wbuf[0] = 0x11;
wbuf[1] = 0x00;
ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0);
if (ret < 0)
goto error;
msleep(1);
/* following msgs should be in the FE's init code? */
/* cmd sequence to identify the device type? (friio black/white) */
wbuf[0] = 0x03;
wbuf[1] = 0x80;
/* can't use gl861_i2c_cmd, as the register-addr is 16bit(0x0100) */
ret = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0),
GL861_REQ_I2C_DATA_CTRL_WRITE, GL861_WRITE,
0x1200, 0x0100, wbuf, 2, 2000);
if (ret < 0)
goto error;
msleep(2);
wbuf[0] = 0x00;
wbuf[2] = 0x01; /* reg.0x0100 */
wbuf[1] = 0x00;
ret = gl861_i2c_msg(d, 0x12 >> 1, wbuf, 3, rbuf, 2);
/* my Friio White returns 0xffff. */
if (ret < 0 || rbuf[0] != 0xff || rbuf[1] != 0xff)
goto error;
msleep(2);
wbuf[0] = 0x03;
wbuf[1] = 0x80;
ret = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0),
GL861_REQ_I2C_DATA_CTRL_WRITE, GL861_WRITE,
0x9000, 0x0100, wbuf, 2, 2000);
if (ret < 0)
goto error;
msleep(2);
wbuf[0] = 0x00;
wbuf[2] = 0x01; /* reg.0x0100 */
wbuf[1] = 0x00;
ret = gl861_i2c_msg(d, 0x90 >> 1, wbuf, 3, rbuf, 2);
/* my Friio White returns 0xffff again. */
if (ret < 0 || rbuf[0] != 0xff || rbuf[1] != 0xff)
goto error;
msleep(1);
restart:
/* ============ start DEMOD init cmds ================== */
/* read PLL status to clear the POR bit */
wbuf[0] = JDVBT90502_2ND_I2C_REG;
wbuf[1] = (FRIIO_PLL_ADDR << 1) + 1; /* +1 for reading */
ret = gl861_i2c_msg(d, FRIIO_DEMOD_ADDR, wbuf, 2, NULL, 0);
if (ret < 0)
goto error;
msleep(5);
/* note: DEMODULATOR has 16bit register-address. */
wbuf[0] = 0x00;
wbuf[2] = 0x01; /* reg addr: 0x0100 */
wbuf[1] = 0x00; /* val: not used */
ret = gl861_i2c_msg(d, FRIIO_DEMOD_ADDR, wbuf, 3, rbuf, 1);
if (ret < 0)
goto error;
/*
msleep(1);
wbuf[0] = 0x80;
wbuf[1] = 0x00;
ret = gl861_i2c_msg(d, FRIIO_DEMOD_ADDR, wbuf, 2, rbuf, 1);
if (ret < 0)
goto error;
*/
if (rbuf[0] & 0x80) { /* still in PowerOnReset state? */
if (++retry > 3) {
deb_info("failed to get the correct"
" FE demod status:0x%02x\n", rbuf[0]);
goto error;
}
msleep(100);
goto restart;
}
/* TODO: check return value in rbuf */
/* =========== end DEMOD init cmds ===================== */
msleep(1);
wbuf[0] = 0x30;
wbuf[1] = 0x04;
ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0);
if (ret < 0)
goto error;
msleep(2);
/* following 2 cmds unnecessary? */
wbuf[0] = 0x00;
wbuf[1] = 0x01;
ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0);
if (ret < 0)
goto error;
wbuf[0] = 0x06;
wbuf[1] = 0x0F;
ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0);
if (ret < 0)
goto error;
/* some streaming ctl cmds (maybe) */
msleep(10);
for (i = 0; i < cmdlen; i++) {
ret = gl861_i2c_msg(d, 0x00, streaming_init_cmds[i], 2,
NULL, 0);
if (ret < 0)
goto error;
msleep(1);
}
msleep(20);
/* change the LED color etc. */
ret = friio_streaming_ctrl(&d->adapter[0], 0);
if (ret < 0)
goto error;
return 0;
error:
kfree(wbuf);
kfree(rbuf);
deb_info("%s:ret == %d\n", __func__, ret);
return -EIO;
}
/* Callbacks for DVB USB */
static int friio_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
{
int ret;
deb_info("%s called.(%d)\n", __func__, onoff);
/* set the LED color and saturation (and LNB on) */
if (onoff)
ret = friio_ext_ctl(adap, 0x6400ff64, 1);
else
ret = friio_ext_ctl(adap, 0x96ff00ff, 1);
if (ret != 1) {
deb_info("%s failed to send cmdx. ret==%d\n", __func__, ret);
return -EREMOTEIO;
}
return 0;
}
static int friio_frontend_attach(struct dvb_usb_adapter *adap)
{
if (friio_initialize(adap->dev) < 0)
return -EIO;
adap->fe_adap[0].fe = jdvbt90502_attach(adap->dev);
if (adap->fe_adap[0].fe == NULL)
return -EIO;
return 0;
}
/* DVB USB Driver stuff */
static struct dvb_usb_device_properties friio_properties;
static int friio_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
struct dvb_usb_device *d;
struct usb_host_interface *alt;
int ret;
if (intf->num_altsetting < GL861_ALTSETTING_COUNT)
return -ENODEV;
alt = usb_altnum_to_altsetting(intf, FRIIO_BULK_ALTSETTING);
if (alt == NULL) {
deb_rc("not alt found!\n");
return -ENODEV;
}
ret = usb_set_interface(interface_to_usbdev(intf),
alt->desc.bInterfaceNumber,
alt->desc.bAlternateSetting);
if (ret != 0) {
deb_rc("failed to set alt-setting!\n");
return ret;
}
ret = dvb_usb_device_init(intf, &friio_properties,
THIS_MODULE, &d, adapter_nr);
if (ret == 0)
friio_streaming_ctrl(&d->adapter[0], 1);
return ret;
}
struct jdvbt90502_config friio_fe_config = {
.demod_address = FRIIO_DEMOD_ADDR,
.pll_address = FRIIO_PLL_ADDR,
};
static struct i2c_algorithm gl861_i2c_algo = {
.master_xfer = gl861_i2c_xfer,
.functionality = gl861_i2c_func,
};
static struct usb_device_id friio_table[] = {
{ USB_DEVICE(USB_VID_774, USB_PID_FRIIO_WHITE) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, friio_table);
static struct dvb_usb_device_properties friio_properties = {
.caps = DVB_USB_IS_AN_I2C_ADAPTER,
.usb_ctrl = DEVICE_SPECIFIC,
.size_of_priv = 0,
.num_adapters = 1,
.adapter = {
/* caps:0 => no pid filter, 188B TS packet */
/* GL861 has a HW pid filter, but no info available. */
{
.num_frontends = 1,
.fe = {{
.caps = 0,
.frontend_attach = friio_frontend_attach,
.streaming_ctrl = friio_streaming_ctrl,
.stream = {
.type = USB_BULK,
/* count <= MAX_NO_URBS_FOR_DATA_STREAM(10) */
.count = 8,
.endpoint = 0x01,
.u = {
/* GL861 has 6KB buf inside */
.bulk = {
.buffersize = 16384,
}
}
},
}},
}
},
.i2c_algo = &gl861_i2c_algo,
.num_device_descs = 1,
.devices = {
{
.name = "774 Friio ISDB-T USB2.0",
.cold_ids = { NULL },
.warm_ids = { &friio_table[0], NULL },
},
}
};
static struct usb_driver friio_driver = {
.name = "dvb_usb_friio",
.probe = friio_probe,
.disconnect = dvb_usb_device_exit,
.id_table = friio_table,
};
module_usb_driver(friio_driver);
MODULE_AUTHOR("Akihiro Tsukada <tskd2@yahoo.co.jp>");
MODULE_DESCRIPTION("Driver for Friio ISDB-T USB2.0 Receiver");
MODULE_VERSION("0.2");
MODULE_LICENSE("GPL");
