/*
* bt878.c: part of the driver for the Pinnacle PCTV Sat DVB PCI card
*
* Copyright (C) 2002 Peter Hettkamp <peter.hettkamp@htp-tel.de>
*
* large parts based on the bttv driver
* Copyright (C) 1996,97,98 Ralph Metzler (rjkm@metzlerbros.de)
* & Marcus Metzler (mocm@metzlerbros.de)
* (c) 1999,2000 Gerd Knorr <kraxel@goldbach.in-berlin.de>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
* Or, point your browser to http://www.gnu.org/copyleft/gpl.html
*
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <asm/io.h>
#include <linux/ioport.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/kmod.h>
#include <linux/vmalloc.h>
#include <linux/init.h>
#include "dmxdev.h"
#include "dvbdev.h"
#include "bt878.h"
#include "dst_priv.h"
/**************************************/
/* Miscellaneous utility definitions */
/**************************************/
static unsigned int bt878_verbose = 1;
static unsigned int bt878_debug;
module_param_named(verbose, bt878_verbose, int, 0444);
MODULE_PARM_DESC(verbose,
"verbose startup messages, default is 1 (yes)");
module_param_named(debug, bt878_debug, int, 0644);
MODULE_PARM_DESC(debug, "Turn on/off debugging, default is 0 (off).");
int bt878_num;
struct bt878 bt878[BT878_MAX];
EXPORT_SYMBOL(bt878_num);
EXPORT_SYMBOL(bt878);
#define btwrite(dat,adr) bmtwrite((dat), (bt->bt878_mem+(adr)))
#define btread(adr) bmtread(bt->bt878_mem+(adr))
#define btand(dat,adr) btwrite((dat) & btread(adr), adr)
#define btor(dat,adr) btwrite((dat) | btread(adr), adr)
#define btaor(dat,mask,adr) btwrite((dat) | ((mask) & btread(adr)), adr)
#if defined(dprintk)
#undef dprintk
#endif
#define dprintk(fmt, arg...) \
do { \
if (bt878_debug) \
printk(KERN_DEBUG fmt, ##arg); \
} while (0)
static void bt878_mem_free(struct bt878 *bt)
{
if (bt->buf_cpu) {
pci_free_consistent(bt->dev, bt->buf_size, bt->buf_cpu,
bt->buf_dma);
bt->buf_cpu = NULL;
}
if (bt->risc_cpu) {
pci_free_consistent(bt->dev, bt->risc_size, bt->risc_cpu,
bt->risc_dma);
bt->risc_cpu = NULL;
}
}
static int bt878_mem_alloc(struct bt878 *bt)
{
if (!bt->buf_cpu) {
bt->buf_size = 128 * 1024;
bt->buf_cpu =
pci_alloc_consistent(bt->dev, bt->buf_size,
&bt->buf_dma);
if (!bt->buf_cpu)
return -ENOMEM;
memset(bt->buf_cpu, 0, bt->buf_size);
}
if (!bt->risc_cpu) {
bt->risc_size = PAGE_SIZE;
bt->risc_cpu =
pci_alloc_consistent(bt->dev, bt->risc_size,
&bt->risc_dma);
if (!bt->risc_cpu) {
bt878_mem_free(bt);
return -ENOMEM;
}
memset(bt->risc_cpu, 0, bt->risc_size);
}
return 0;
}
/* RISC instructions */
#define RISC_WRITE (0x01 << 28)
#define RISC_JUMP (0x07 << 28)
#define RISC_SYNC (0x08 << 28)
/* RISC bits */
#define RISC_WR_SOL (1 << 27)
#define RISC_WR_EOL (1 << 26)
#define RISC_IRQ (1 << 24)
#define RISC_STATUS(status) ((((~status) & 0x0F) << 20) | ((status & 0x0F) << 16))
#define RISC_SYNC_RESYNC (1 << 15)
#define RISC_SYNC_FM1 0x06
#define RISC_SYNC_VRO 0x0C
#define RISC_FLUSH() bt->risc_pos = 0
#define RISC_INSTR(instr) bt->risc_cpu[bt->risc_pos++] = cpu_to_le32(instr)
static int bt878_make_risc(struct bt878 *bt)
{
bt->block_bytes = bt->buf_size >> 4;
bt->block_count = 1 << 4;
bt->line_bytes = bt->block_bytes;
bt->line_count = bt->block_count;
while (bt->line_bytes > 4095) {
bt->line_bytes >>= 1;
bt->line_count <<= 1;
}
if (bt->line_count > 255) {
printk(KERN_ERR "bt878: buffer size error!\n");
return -EINVAL;
}
return 0;
}
static void bt878_risc_program(struct bt878 *bt, u32 op_sync_orin)
{
u32 buf_pos = 0;
u32 line;
RISC_FLUSH();
RISC_INSTR(RISC_SYNC | RISC_SYNC_FM1 | op_sync_orin);
RISC_INSTR(0);
dprintk("bt878: risc len lines %u, bytes per line %u\n",
bt->line_count, bt->line_bytes);
for (line = 0; line < bt->line_count; line++) {
// At the beginning of every block we issue an IRQ with previous (finished) block number set
if (!(buf_pos % bt->block_bytes))
RISC_INSTR(RISC_WRITE | RISC_WR_SOL | RISC_WR_EOL |
RISC_IRQ |
RISC_STATUS(((buf_pos /
bt->block_bytes) +
(bt->block_count -
1)) %
bt->block_count) | bt->
line_bytes);
else
RISC_INSTR(RISC_WRITE | RISC_WR_SOL | RISC_WR_EOL |
bt->line_bytes);
RISC_INSTR(bt->buf_dma + buf_pos);
buf_pos += bt->line_bytes;
}
RISC_INSTR(RISC_SYNC | op_sync_orin | RISC_SYNC_VRO);
RISC_INSTR(0);
RISC_INSTR(RISC_JUMP);
RISC_INSTR(bt->risc_dma);
btwrite((bt->line_count << 16) | bt->line_bytes, BT878_APACK_LEN);
}
/*****************************/
/* Start/Stop grabbing funcs */
/*****************************/
void bt878_start(struct bt878 *bt, u32 controlreg, u32 op_sync_orin,
u32 irq_err_ignore)
{
u32 int_mask;
dprintk("bt878 debug: bt878_start (ctl=%8.8x)\n", controlreg);
/* complete the writing of the risc dma program now we have
* the card specifics
*/
bt878_risc_program(bt, op_sync_orin);
controlreg &= ~0x1f;
controlreg |= 0x1b;
btwrite(bt->risc_dma, BT878_ARISC_START);
/* original int mask had :
* 6 2 8 4 0
* 1111 1111 1000 0000 0000
* SCERR|OCERR|PABORT|RIPERR|FDSR|FTRGT|FBUS|RISCI
* Hacked for DST to:
* SCERR | OCERR | FDSR | FTRGT | FBUS | RISCI
*/
int_mask = BT878_ASCERR | BT878_AOCERR | BT878_APABORT |
BT878_ARIPERR | BT878_APPERR | BT878_AFDSR | BT878_AFTRGT |
BT878_AFBUS | BT878_ARISCI;
/* ignore pesky bits */
int_mask &= ~irq_err_ignore;
btwrite(int_mask, BT878_AINT_MASK);
btwrite(controlreg, BT878_AGPIO_DMA_CTL);
}
void bt878_stop(struct bt878 *bt)
{
u32 stat;
int i = 0;
dprintk("bt878 debug: bt878_stop\n");
btwrite(0, BT878_AINT_MASK);
btand(~0x13, BT878_AGPIO_DMA_CTL);
do {
stat = btread(BT878_AINT_STAT);
if (!(stat & BT878_ARISC_EN))
break;
i++;
} while (i < 500);
dprintk("bt878(%d) debug: bt878_stop, i=%d, stat=0x%8.8x\n",
bt->nr, i, stat);
}
EXPORT_SYMBOL(bt878_start);
EXPORT_SYMBOL(bt878_stop);
/*****************************/
/* Interrupt service routine */
/*****************************/
static irqreturn_t bt878_irq(int irq, void *dev_id)
{
u32 stat, astat, mask;
int count;
struct bt878 *bt;
bt = (struct bt878 *) dev_id;
count = 0;
while (1) {
stat = btread(BT878_AINT_STAT);
mask = btread(BT878_AINT_MASK);
if (!(astat = (stat & mask)))
return IRQ_NONE; /* this interrupt is not for me */
/* dprintk("bt878(%d) debug: irq count %d, stat 0x%8.8x, mask 0x%8.8x\n",bt->nr,count,stat,mask); */
btwrite(astat, BT878_AINT_STAT); /* try to clear interrupt condition */
if (astat & (BT878_ASCERR | BT878_AOCERR)) {
if (bt878_verbose) {
printk(KERN_INFO
"bt878(%d): irq%s%s risc_pc=%08x\n",
bt->nr,
(astat & BT878_ASCERR) ? " SCERR" :
"",
(astat & BT878_AOCERR) ? " OCERR" :
"", btread(BT878_ARISC_PC));
}
}
if (astat & (BT878_APABORT | BT878_ARIPERR | BT878_APPERR)) {
if (bt878_verbose) {
printk(KERN_INFO
"bt878(%d): irq%s%s%s risc_pc=%08x\n",
bt->nr,
(astat & BT878_APABORT) ? " PABORT" :
"",
(astat & BT878_ARIPERR) ? " RIPERR" :
"",
(astat & BT878_APPERR) ? " PPERR" :
"", btread(BT878_ARISC_PC));
}
}
if (astat & (BT878_AFDSR | BT878_AFTRGT | BT878_AFBUS)) {
if (bt878_verbose) {
printk(KERN_INFO
"bt878(%d): irq%s%s%s risc_pc=%08x\n",
bt->nr,
(astat & BT878_AFDSR) ? " FDSR" : "",
(astat & BT878_AFTRGT) ? " FTRGT" :
"",
(astat & BT878_AFBUS) ? " FBUS" : "",
btread(BT878_ARISC_PC));
}
}
if (astat & BT878_ARISCI) {
bt->finished_block = (stat & BT878_ARISCS) >> 28;
tasklet_schedule(&bt->tasklet);
break;
}
count++;
if (count > 20) {
btwrite(0, BT878_AINT_MASK);
printk(KERN_ERR
"bt878(%d): IRQ lockup, cleared int mask\n",
bt->nr);
break;
}
}
return IRQ_HANDLED;
}
int
bt878_device_control(struct bt878 *bt, unsigned int cmd, union dst_gpio_packet *mp)
{
int retval;
retval = 0;
if (mutex_lock_interruptible(&bt->gpio_lock))
return -ERESTARTSYS;
/* special gpio signal */
switch (cmd) {
case DST_IG_ENABLE:
// dprintk("dvb_bt8xx: dst enable mask 0x%02x enb 0x%02x \n", mp->dstg.enb.mask, mp->dstg.enb.enable);
retval = bttv_gpio_enable(bt->bttv_nr,
mp->enb.mask,
mp->enb.enable);
break;
case DST_IG_WRITE:
// dprintk("dvb_bt8xx: dst write gpio mask 0x%02x out 0x%02x\n", mp->dstg.outp.mask, mp->dstg.outp.highvals);
retval = bttv_write_gpio(bt->bttv_nr,
mp->outp.mask,
mp->outp.highvals);
break;
case DST_IG_READ:
/* read */
retval = bttv_read_gpio(bt->bttv_nr, &mp->rd.value);
// dprintk("dvb_bt8xx: dst read gpio 0x%02x\n", (unsigned)mp->dstg.rd.value);
break;
case DST_IG_TS:
/* Set packet size */
bt->TS_Size = mp->psize;
break;
default:
retval = -EINVAL;
break;
}
mutex_unlock(&bt->gpio_lock);
return retval;
}
EXPORT_SYMBOL(bt878_device_control);
#define BROOKTREE_878_DEVICE(vend, dev, name) \
{ \
.vendor = PCI_VENDOR_ID_BROOKTREE, \
.device = PCI_DEVICE_ID_BROOKTREE_878, \
.subvendor = (vend), .subdevice = (dev), \
.driver_data = (unsigned long) name \
}
static struct pci_device_id bt878_pci_tbl[] __devinitdata = {
BROOKTREE_878_DEVICE(0x0071, 0x0101, "Nebula Electronics DigiTV"),
BROOKTREE_878_DEVICE(0x1461, 0x0761, "AverMedia AverTV DVB-T 761"),
BROOKTREE_878_DEVICE(0x11bd, 0x001c, "Pinnacle PCTV Sat"),
BROOKTREE_878_DEVICE(0x11bd, 0x0026, "Pinnacle PCTV SAT CI"),
BROOKTREE_878_DEVICE(0x1822, 0x0001, "Twinhan VisionPlus DVB"),
BROOKTREE_878_DEVICE(0x270f, 0xfc00,
"ChainTech digitop DST-1000 DVB-S"),
BROOKTREE_878_DEVICE(0x1461, 0x0771, "AVermedia AverTV DVB-T 771"),
BROOKTREE_878_DEVICE(0x18ac, 0xdb10, "DViCO FusionHDTV DVB-T Lite"),
BROOKTREE_878_DEVICE(0x18ac, 0xdb11, "Ultraview DVB-T Lite"),
BROOKTREE_878_DEVICE(0x18ac, 0xd500, "DViCO FusionHDTV 5 Lite"),
BROOKTREE_878_DEVICE(0x7063, 0x2000, "pcHDTV HD-2000 TV"),
BROOKTREE_878_DEVICE(0x1822, 0x0026, "DNTV Live! Mini"),
{ }
};
MODULE_DEVICE_TABLE(pci, bt878_pci_tbl);
static const char * __devinit card_name(const struct pci_device_id *id)
{
return id->driver_data ? (const char *)id->driver_data : "Unknown";
}
/***********************/
/* PCI device handling */
/***********************/
static int __devinit bt878_probe(struct pci_dev *dev,
const struct pci_device_id *pci_id)
{
int result = 0;
unsigned char lat;
struct bt878 *bt;
#if defined(__powerpc__)
unsigned int cmd;
#endif
unsigned int cardid;
printk(KERN_INFO "bt878: Bt878 AUDIO function found (%d).\n",
bt878_num);
if (bt878_num >= BT878_MAX) {
printk(KERN_ERR "bt878: Too many devices inserted\n");
result = -ENOMEM;
goto fail0;
}
if (pci_enable_device(dev))
return -EIO;
cardid = dev->subsystem_device << 16;
cardid |= dev->subsystem_vendor;
printk(KERN_INFO "%s: card id=[0x%x],[ %s ] has DVB functions.\n",
__func__, cardid, card_name(pci_id));
bt = &bt878[bt878_num];
bt->dev = dev;
bt->nr = bt878_num;
bt->shutdown = 0;
bt->id = dev->device;
bt->irq = dev->irq;
bt->bt878_adr = pci_resource_start(dev, 0);
if (!request_mem_region(pci_resource_start(dev, 0),
pci_resource_len(dev, 0), "bt878")) {
result = -EBUSY;
goto fail0;
}
pci_read_config_byte(dev, PCI_CLASS_REVISION, &bt->revision);
pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
printk(KERN_INFO "bt878(%d): Bt%x (rev %d) at %02x:%02x.%x, ",
bt878_num, bt->id, bt->revision, dev->bus->number,
PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
printk("irq: %d, latency: %d, memory: 0x%lx\n",
bt->irq, lat, bt->bt878_adr);
#if defined(__powerpc__)
/* on OpenFirmware machines (PowerMac at least), PCI memory cycle */
/* response on cards with no firmware is not enabled by OF */
pci_read_config_dword(dev, PCI_COMMAND, &cmd);
cmd = (cmd | PCI_COMMAND_MEMORY);
pci_write_config_dword(dev, PCI_COMMAND, cmd);
#endif
#ifdef __sparc__
bt->bt878_mem = (unsigned char *) bt->bt878_adr;
#else
bt->bt878_mem = ioremap(bt->bt878_adr, 0x1000);
#endif
/* clear interrupt mask */
btwrite(0, BT848_INT_MASK);
result = request_irq(bt->irq, bt878_irq,
IRQF_SHARED | IRQF_DISABLED, "bt878",
(void *) bt);
if (result == -EINVAL) {
printk(KERN_ERR "bt878(%d): Bad irq number or handler\n",
bt878_num);
goto fail1;
}
if (result == -EBUSY) {
printk(KERN_ERR
"bt878(%d): IRQ %d busy, change your PnP config in BIOS\n",
bt878_num, bt->irq);
goto fail1;
}
if (result < 0)
goto fail1;
pci_set_master(dev);
pci_set_drvdata(dev, bt);
/* if(init_bt878(btv) < 0) {
bt878_remove(dev);
return -EIO;
}
*/
if ((result = bt878_mem_alloc(bt))) {
printk(KERN_ERR "bt878: failed to allocate memory!\n");
goto fail2;
}
bt878_make_risc(bt);
btwrite(0, BT878_AINT_MASK);
bt878_num++;
return 0;
fail2:
free_irq(bt->irq, bt);
fail1:
release_mem_region(pci_resource_start(bt->dev, 0),
pci_resource_len(bt->dev, 0));
fail0:
pci_disable_device(dev);
return result;
}
static void __devexit bt878_remove(struct pci_dev *pci_dev)
{
u8 command;
struct bt878 *bt = pci_get_drvdata(pci_dev);
if (bt878_verbose)
printk(KERN_INFO "bt878(%d): unloading\n", bt->nr);
/* turn off all capturing, DMA and IRQs */
btand(~0x13, BT878_AGPIO_DMA_CTL);
/* first disable interrupts before unmapping the memory! */
btwrite(0, BT878_AINT_MASK);
btwrite(~0U, BT878_AINT_STAT);
/* disable PCI bus-mastering */
pci_read_config_byte(bt->dev, PCI_COMMAND, &command);
/* Should this be &=~ ?? */
command &= ~PCI_COMMAND_MASTER;
pci_write_config_byte(bt->dev, PCI_COMMAND, command);
free_irq(bt->irq, bt);
printk(KERN_DEBUG "bt878_mem: 0x%p.\n", bt->bt878_mem);
if (bt->bt878_mem)
iounmap(bt->bt878_mem);
release_mem_region(pci_resource_start(bt->dev, 0),
pci_resource_len(bt->dev, 0));
/* wake up any waiting processes
because shutdown flag is set, no new processes (in this queue)
are expected
*/
bt->shutdown = 1;
bt878_mem_free(bt);
pci_set_drvdata(pci_dev, NULL);
pci_disable_device(pci_dev);
return;
}
static struct pci_driver bt878_pci_driver = {
.name = "bt878",
.id_table = bt878_pci_tbl,
.probe = bt878_probe,
.remove = bt878_remove,
};
static int bt878_pci_driver_registered;
/*******************************/
/* Module management functions */
/*******************************/
static int bt878_init_module(void)
{
bt878_num = 0;
bt878_pci_driver_registered = 0;
printk(KERN_INFO "bt878: AUDIO driver version %d.%d.%d loaded\n",
(BT878_VERSION_CODE >> 16) & 0xff,
(BT878_VERSION_CODE >> 8) & 0xff,
BT878_VERSION_CODE & 0xff);
/*
bt878_check_chipset();
*/
/* later we register inside of bt878_find_audio_dma()
* because we may want to ignore certain cards */
bt878_pci_driver_registered = 1;
return pci_register_driver(&bt878_pci_driver);
}
static void bt878_cleanup_module(void)
{
if (bt878_pci_driver_registered) {
bt878_pci_driver_registered = 0;
pci_unregister_driver(&bt878_pci_driver);
}
return;
}
module_init(bt878_init_module);
module_exit(bt878_cleanup_module);
//MODULE_AUTHOR("XXX");
MODULE_LICENSE("GPL");
/*
* Local variables:
* c-basic-offset: 8
* End:
*/
