/*
* This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
*
* flexcop-eeprom.c - eeprom access methods (currently only MAC address reading is used)
*
* see flexcop.c for copyright information.
*/
#include "flexcop.h"
#if 0
/*EEPROM (Skystar2 has one "24LC08B" chip on board) */
static int eeprom_write(struct adapter *adapter, u16 addr, u8 *buf, u16 len)
{
return flex_i2c_write(adapter, 0x20000000, 0x50, addr, buf, len);
}
static int eeprom_lrc_write(struct adapter *adapter, u32 addr, u32 len, u8 *wbuf, u8 *rbuf, int retries)
{
int i;
for (i = 0; i < retries; i++) {
if (eeprom_write(adapter, addr, wbuf, len) == len) {
if (eeprom_lrc_read(adapter, addr, len, rbuf, retries) == 1)
return 1;
}
}
return 0;
}
/* These functions could be used to unlock SkyStar2 cards. */
static int eeprom_writeKey(struct adapter *adapter, u8 *key, u32 len)
{
u8 rbuf[20];
u8 wbuf[20];
if (len != 16)
return 0;
memcpy(wbuf, key, len);
wbuf[16] = 0;
wbuf[17] = 0;
wbuf[18] = 0;
wbuf[19] = calc_lrc(wbuf, 19);
return eeprom_lrc_write(adapter, 0x3e4, 20, wbuf, rbuf, 4);
}
static int eeprom_readKey(struct adapter *adapter, u8 *key, u32 len)
{
u8 buf[20];
if (len != 16)
return 0;
if (eeprom_lrc_read(adapter, 0x3e4, 20, buf, 4) == 0)
return 0;
memcpy(key, buf, len);
return 1;
}
static char eeprom_set_mac_addr(struct adapter *adapter, char type, u8 *mac)
{
u8 tmp[8];
if (type != 0) {
tmp[0] = mac[0];
tmp[1] = mac[1];
tmp[2] = mac[2];
tmp[3] = mac[5];
tmp[4] = mac[6];
tmp[5] = mac[7];
} else {
tmp[0] = mac[0];
tmp[1] = mac[1];
tmp[2] = mac[2];
tmp[3] = mac[3];
tmp[4] = mac[4];
tmp[5] = mac[5];
}
tmp[6] = 0;
tmp[7] = calc_lrc(tmp, 7);
if (eeprom_write(adapter, 0x3f8, tmp, 8) == 8)
return 1;
return 0;
}
static int flexcop_eeprom_read(struct flexcop_device *fc, u16 addr, u8 *buf, u16 len)
{
return fc->i2c_request(fc,FC_READ,FC_I2C_PORT_EEPROM,0x50,addr,buf,len);
}
#endif
static u8 calc_lrc(u8 *buf, int len)
{
int i;
u8 sum = 0;
for (i = 0; i < len; i++)
sum = sum ^ buf[i];
return sum;
}
static int flexcop_eeprom_request(struct flexcop_device *fc, flexcop_access_op_t op, u16 addr, u8 *buf, u16 len, int retries)
{
int i,ret = 0;
u8 chipaddr = 0x50 | ((addr >> 8) & 3);
for (i = 0; i < retries; i++) {
ret = fc->i2c_request(&fc->fc_i2c_adap[1], op, chipaddr,
addr & 0xff, buf, len);
if (ret == 0)
break;
}
return ret;
}
static int flexcop_eeprom_lrc_read(struct flexcop_device *fc, u16 addr, u8 *buf, u16 len, int retries)
{
int ret = flexcop_eeprom_request(fc, FC_READ, addr, buf, len, retries);
if (ret == 0)
if (calc_lrc(buf, len - 1) != buf[len - 1])
ret = -EINVAL;
return ret;
}
/* JJ's comment about extended == 1: it is not presently used anywhere but was
* added to the low-level functions for possible support of EUI64
*/
int flexcop_eeprom_check_mac_addr(struct flexcop_device *fc, int extended)
{
u8 buf[8];
int ret = 0;
if ((ret = flexcop_eeprom_lrc_read(fc,0x3f8,buf,8,4)) == 0) {
if (extended != 0) {
err("TODO: extended (EUI64) MAC addresses aren't completely supported yet");
ret = -EINVAL;
/* memcpy(fc->dvb_adapter.proposed_mac,buf,3);
mac[3] = 0xfe;
mac[4] = 0xff;
memcpy(&fc->dvb_adapter.proposed_mac[3],&buf[5],3); */
} else
memcpy(fc->dvb_adapter.proposed_mac,buf,6);
}
return ret;
}
EXPORT_SYMBOL(flexcop_eeprom_check_mac_addr);