/*
* $Id: gunze.c,v 1.12 2001/09/25 10:12:07 vojtech Exp $
*
* Copyright (c) 2000-2001 Vojtech Pavlik
*/
/*
* Gunze AHL-51S touchscreen driver for Linux
*/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* Should you need to contact me, the author, you can do so either by
* e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
* Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
*/
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/input.h>
#include <linux/serio.h>
#include <linux/init.h>
#define DRIVER_DESC "Gunze AHL-51S touchscreen driver"
MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
/*
* Definitions & global arrays.
*/
#define GUNZE_MAX_LENGTH 10
static char *gunze_name = "Gunze AHL-51S TouchScreen";
/*
* Per-touchscreen data.
*/
struct gunze {
struct input_dev dev;
struct serio *serio;
int idx;
unsigned char data[GUNZE_MAX_LENGTH];
char phys[32];
};
static void gunze_process_packet(struct gunze* gunze, struct pt_regs *regs)
{
struct input_dev *dev = &gunze->dev;
if (gunze->idx != GUNZE_MAX_LENGTH || gunze->data[5] != ',' ||
(gunze->data[0] != 'T' && gunze->data[0] != 'R')) {
printk(KERN_WARNING "gunze.c: bad packet: >%.*s<\n", GUNZE_MAX_LENGTH, gunze->data);
return;
}
input_regs(dev, regs);
input_report_abs(dev, ABS_X, simple_strtoul(gunze->data + 1, NULL, 10));
input_report_abs(dev, ABS_Y, 1024 - simple_strtoul(gunze->data + 6, NULL, 10));
input_report_key(dev, BTN_TOUCH, gunze->data[0] == 'T');
input_sync(dev);
}
static irqreturn_t gunze_interrupt(struct serio *serio,
unsigned char data, unsigned int flags, struct pt_regs *regs)
{
struct gunze* gunze = serio_get_drvdata(serio);
if (data == '\r') {
gunze_process_packet(gunze, regs);
gunze->idx = 0;
} else {
if (gunze->idx < GUNZE_MAX_LENGTH)
gunze->data[gunze->idx++] = data;
}
return IRQ_HANDLED;
}
/*
* gunze_disconnect() is the opposite of gunze_connect()
*/
static void gunze_disconnect(struct serio *serio)
{
struct gunze* gunze = serio_get_drvdata(serio);
input_unregister_device(&gunze->dev);
serio_close(serio);
serio_set_drvdata(serio, NULL);
kfree(gunze);
}
/*
* gunze_connect() is the routine that is called when someone adds a
* new serio device that supports Gunze protocol and registers it as
* an input device.
*/
static int gunze_connect(struct serio *serio, struct serio_driver *drv)
{
struct gunze *gunze;
int err;
if (!(gunze = kmalloc(sizeof(struct gunze), GFP_KERNEL)))
return -ENOMEM;
memset(gunze, 0, sizeof(struct gunze));
init_input_dev(&gunze->dev);
gunze->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
gunze->dev.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
input_set_abs_params(&gunze->dev, ABS_X, 24, 1000, 0, 0);
input_set_abs_params(&gunze->dev, ABS_Y, 24, 1000, 0, 0);
gunze->serio = serio;
sprintf(gunze->phys, "%s/input0", serio->phys);
gunze->dev.private = gunze;
gunze->dev.name = gunze_name;
gunze->dev.phys = gunze->phys;
gunze->dev.id.bustype = BUS_RS232;
gunze->dev.id.vendor = SERIO_GUNZE;
gunze->dev.id.product = 0x0051;
gunze->dev.id.version = 0x0100;
serio_set_drvdata(serio, gunze);
err = serio_open(serio, drv);
if (err) {
serio_set_drvdata(serio, NULL);
kfree(gunze);
return err;
}
input_register_device(&gunze->dev);
printk(KERN_INFO "input: %s on %s\n", gunze_name, serio->phys);
return 0;
}
/*
* The serio driver structure.
*/
static struct serio_device_id gunze_serio_ids[] = {
{
.type = SERIO_RS232,
.proto = SERIO_GUNZE,
.id = SERIO_ANY,
.extra = SERIO_ANY,
},
{ 0 }
};
MODULE_DEVICE_TABLE(serio, gunze_serio_ids);
static struct serio_driver gunze_drv = {
.driver = {
.name = "gunze",
},
.description = DRIVER_DESC,
.id_table = gunze_serio_ids,
.interrupt = gunze_interrupt,
.connect = gunze_connect,
.disconnect = gunze_disconnect,
};
/*
* The functions for inserting/removing us as a module.
*/
static int __init gunze_init(void)
{
serio_register_driver(&gunze_drv);
return 0;
}
static void __exit gunze_exit(void)
{
serio_unregister_driver(&gunze_drv);
}
module_init(gunze_init);
module_exit(gunze_exit);
