/*
* Elo serial touchscreen driver
*
* Copyright (c) 2004 Vojtech Pavlik
*/
/*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
/*
* This driver can handle serial Elo touchscreens using either the Elo standard
* 'E271-2210' 10-byte protocol, Elo legacy 'E281A-4002' 6-byte protocol, Elo
* legacy 'E271-140' 4-byte protocol and Elo legacy 'E261-280' 3-byte protocol.
*/
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/input.h>
#include <linux/serio.h>
#include <linux/init.h>
#define DRIVER_DESC "Elo serial touchscreen driver"
MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
/*
* Definitions & global arrays.
*/
#define ELO_MAX_LENGTH 10
static char *elo_name = "Elo Serial TouchScreen";
/*
* Per-touchscreen data.
*/
struct elo {
struct input_dev dev;
struct serio *serio;
int id;
int idx;
unsigned char csum;
unsigned char data[ELO_MAX_LENGTH];
char phys[32];
};
static void elo_process_data_10(struct elo* elo, unsigned char data, struct pt_regs *regs)
{
struct input_dev *dev = &elo->dev;
elo->csum += elo->data[elo->idx] = data;
switch (elo->idx++) {
case 0:
if (data != 'U') {
elo->idx = 0;
elo->csum = 0;
}
break;
case 1:
if (data != 'T') {
elo->idx = 0;
elo->csum = 0;
}
break;
case 9:
if (elo->csum) {
input_regs(dev, regs);
input_report_abs(dev, ABS_X, (elo->data[4] << 8) | elo->data[3]);
input_report_abs(dev, ABS_Y, (elo->data[6] << 8) | elo->data[5]);
input_report_abs(dev, ABS_PRESSURE, (elo->data[8] << 8) | elo->data[7]);
input_report_key(dev, BTN_TOUCH, elo->data[2] & 3);
input_sync(dev);
}
elo->idx = 0;
elo->csum = 0;
break;
}
}
static void elo_process_data_6(struct elo* elo, unsigned char data, struct pt_regs *regs)
{
struct input_dev *dev = &elo->dev;
elo->data[elo->idx] = data;
switch (elo->idx++) {
case 0: if ((data & 0xc0) != 0xc0) elo->idx = 0; break;
case 1: if ((data & 0xc0) != 0x80) elo->idx = 0; break;
case 2: if ((data & 0xc0) != 0x40) elo->idx = 0; break;
case 3:
if (data & 0xc0) {
elo->idx = 0;
break;
}
input_regs(dev, regs);
input_report_abs(dev, ABS_X, ((elo->data[0] & 0x3f) << 6) | (elo->data[1] & 0x3f));
input_report_abs(dev, ABS_Y, ((elo->data[2] & 0x3f) << 6) | (elo->data[3] & 0x3f));
if (elo->id == 2) {
input_report_key(dev, BTN_TOUCH, 1);
input_sync(dev);
elo->idx = 0;
}
break;
case 4:
if (data) {
input_sync(dev);
elo->idx = 0;
}
break;
case 5:
if ((data & 0xf0) == 0) {
input_report_abs(dev, ABS_PRESSURE, elo->data[5]);
input_report_key(dev, BTN_TOUCH, elo->data[5]);
}
input_sync(dev);
elo->idx = 0;
break;
}
}
static void elo_process_data_3(struct elo* elo, unsigned char data, struct pt_regs *regs)
{
struct input_dev *dev = &elo->dev;
elo->data[elo->idx] = data;
switch (elo->idx++) {
case 0:
if ((data & 0x7f) != 0x01)
elo->idx = 0;
break;
case 2:
input_regs(dev, regs);
input_report_key(dev, BTN_TOUCH, !(elo->data[1] & 0x80));
input_report_abs(dev, ABS_X, elo->data[1]);
input_report_abs(dev, ABS_Y, elo->data[2]);
input_sync(dev);
elo->idx = 0;
break;
}
}
static irqreturn_t elo_interrupt(struct serio *serio,
unsigned char data, unsigned int flags, struct pt_regs *regs)
{
struct elo* elo = serio_get_drvdata(serio);
switch(elo->id) {
case 0:
elo_process_data_10(elo, data, regs);
break;
case 1:
case 2:
elo_process_data_6(elo, data, regs);
break;
case 3:
elo_process_data_3(elo, data, regs);
break;
}
return IRQ_HANDLED;
}
/*
* elo_disconnect() is the opposite of elo_connect()
*/
static void elo_disconnect(struct serio *serio)
{
struct elo* elo = serio_get_drvdata(serio);
input_unregister_device(&elo->dev);
serio_close(serio);
serio_set_drvdata(serio, NULL);
kfree(elo);
}
/*
* elo_connect() is the routine that is called when someone adds a
* new serio device that supports Gunze protocol and registers it as
* an input device.
*/
static int elo_connect(struct serio *serio, struct serio_driver *drv)
{
struct elo *elo;
int err;
if (!(elo = kmalloc(sizeof(struct elo), GFP_KERNEL)))
return -ENOMEM;
memset(elo, 0, sizeof(struct elo));
init_input_dev(&elo->dev);
elo->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
elo->dev.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
elo->id = serio->id.id;
switch (elo->id) {
case 0: /* 10-byte protocol */
input_set_abs_params(&elo->dev, ABS_X, 96, 4000, 0, 0);
input_set_abs_params(&elo->dev, ABS_Y, 96, 4000, 0, 0);
input_set_abs_params(&elo->dev, ABS_PRESSURE, 0, 255, 0, 0);
break;
case 1: /* 6-byte protocol */
input_set_abs_params(&elo->dev, ABS_PRESSURE, 0, 15, 0, 0);
case 2: /* 4-byte protocol */
input_set_abs_params(&elo->dev, ABS_X, 96, 4000, 0, 0);
input_set_abs_params(&elo->dev, ABS_Y, 96, 4000, 0, 0);
break;
case 3: /* 3-byte protocol */
input_set_abs_params(&elo->dev, ABS_X, 0, 255, 0, 0);
input_set_abs_params(&elo->dev, ABS_Y, 0, 255, 0, 0);
break;
}
elo->serio = serio;
sprintf(elo->phys, "%s/input0", serio->phys);
elo->dev.private = elo;
elo->dev.name = elo_name;
elo->dev.phys = elo->phys;
elo->dev.id.bustype = BUS_RS232;
elo->dev.id.vendor = SERIO_ELO;
elo->dev.id.product = elo->id;
elo->dev.id.version = 0x0100;
serio_set_drvdata(serio, elo);
err = serio_open(serio, drv);
if (err) {
serio_set_drvdata(serio, NULL);
kfree(elo);
return err;
}
input_register_device(&elo->dev);
printk(KERN_INFO "input: %s on %s\n", elo_name, serio->phys);
return 0;
}
/*
* The serio driver structure.
*/
static struct serio_device_id elo_serio_ids[] = {
{
.type = SERIO_RS232,
.proto = SERIO_ELO,
.id = SERIO_ANY,
.extra = SERIO_ANY,
},
{ 0 }
};
MODULE_DEVICE_TABLE(serio, elo_serio_ids);
static struct serio_driver elo_drv = {
.driver = {
.name = "elo",
},
.description = DRIVER_DESC,
.id_table = elo_serio_ids,
.interrupt = elo_interrupt,
.connect = elo_connect,
.disconnect = elo_disconnect,
};
/*
* The functions for inserting/removing us as a module.
*/
static int __init elo_init(void)
{
serio_register_driver(&elo_drv);
return 0;
}
static void __exit elo_exit(void)
{
serio_unregister_driver(&elo_drv);
}
module_init(elo_init);
module_exit(elo_exit);
