/*
* $Id: inport.c,v 1.11 2001/09/25 10:12:07 vojtech Exp $
*
* Copyright (c) 1999-2001 Vojtech Pavlik
*
* Based on the work of:
* Teemu Rantanen Derrick Cole
* Peter Cervasio Christoph Niemann
* Philip Blundell Russell King
* Bob Harris
*/
/*
* Inport (ATI XL and Microsoft) busmouse driver for Linux
*/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* Should you need to contact me, the author, you can do so either by
* e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
* Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/config.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/input.h>
#include <asm/io.h>
#include <asm/irq.h>
MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
MODULE_DESCRIPTION("Inport (ATI XL and Microsoft) busmouse driver");
MODULE_LICENSE("GPL");
#define INPORT_BASE 0x23c
#define INPORT_EXTENT 4
#define INPORT_CONTROL_PORT INPORT_BASE + 0
#define INPORT_DATA_PORT INPORT_BASE + 1
#define INPORT_SIGNATURE_PORT INPORT_BASE + 2
#define INPORT_REG_BTNS 0x00
#define INPORT_REG_X 0x01
#define INPORT_REG_Y 0x02
#define INPORT_REG_MODE 0x07
#define INPORT_RESET 0x80
#ifdef CONFIG_INPUT_ATIXL
#define INPORT_NAME "ATI XL Mouse"
#define INPORT_VENDOR 0x0002
#define INPORT_SPEED_30HZ 0x01
#define INPORT_SPEED_50HZ 0x02
#define INPORT_SPEED_100HZ 0x03
#define INPORT_SPEED_200HZ 0x04
#define INPORT_MODE_BASE INPORT_SPEED_100HZ
#define INPORT_MODE_IRQ 0x08
#else
#define INPORT_NAME "Microsoft InPort Mouse"
#define INPORT_VENDOR 0x0001
#define INPORT_MODE_BASE 0x10
#define INPORT_MODE_IRQ 0x01
#endif
#define INPORT_MODE_HOLD 0x20
#define INPORT_IRQ 5
static int inport_irq = INPORT_IRQ;
module_param_named(irq, inport_irq, uint, 0);
MODULE_PARM_DESC(irq, "IRQ number (5=default)");
__obsolete_setup("inport_irq=");
static irqreturn_t inport_interrupt(int irq, void *dev_id, struct pt_regs *regs);
static int inport_open(struct input_dev *dev)
{
if (request_irq(inport_irq, inport_interrupt, 0, "inport", NULL))
return -EBUSY;
outb(INPORT_REG_MODE, INPORT_CONTROL_PORT);
outb(INPORT_MODE_IRQ | INPORT_MODE_BASE, INPORT_DATA_PORT);
return 0;
}
static void inport_close(struct input_dev *dev)
{
outb(INPORT_REG_MODE, INPORT_CONTROL_PORT);
outb(INPORT_MODE_BASE, INPORT_DATA_PORT);
free_irq(inport_irq, NULL);
}
static struct input_dev inport_dev = {
.evbit = { BIT(EV_KEY) | BIT(EV_REL) },
.keybit = { [LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT) },
.relbit = { BIT(REL_X) | BIT(REL_Y) },
.open = inport_open,
.close = inport_close,
.name = INPORT_NAME,
.phys = "isa023c/input0",
.id = {
.bustype = BUS_ISA,
.vendor = INPORT_VENDOR,
.product = 0x0001,
.version = 0x0100,
},
};
static irqreturn_t inport_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
unsigned char buttons;
outb(INPORT_REG_MODE, INPORT_CONTROL_PORT);
outb(INPORT_MODE_HOLD | INPORT_MODE_IRQ | INPORT_MODE_BASE, INPORT_DATA_PORT);
input_regs(&inport_dev, regs);
outb(INPORT_REG_X, INPORT_CONTROL_PORT);
input_report_rel(&inport_dev, REL_X, inb(INPORT_DATA_PORT));
outb(INPORT_REG_Y, INPORT_CONTROL_PORT);
input_report_rel(&inport_dev, REL_Y, inb(INPORT_DATA_PORT));
outb(INPORT_REG_BTNS, INPORT_CONTROL_PORT);
buttons = inb(INPORT_DATA_PORT);
input_report_key(&inport_dev, BTN_MIDDLE, buttons & 1);
input_report_key(&inport_dev, BTN_LEFT, buttons & 2);
input_report_key(&inport_dev, BTN_RIGHT, buttons & 4);
outb(INPORT_REG_MODE, INPORT_CONTROL_PORT);
outb(INPORT_MODE_IRQ | INPORT_MODE_BASE, INPORT_DATA_PORT);
input_sync(&inport_dev);
return IRQ_HANDLED;
}
static int __init inport_init(void)
{
unsigned char a,b,c;
if (!request_region(INPORT_BASE, INPORT_EXTENT, "inport")) {
printk(KERN_ERR "inport.c: Can't allocate ports at %#x\n", INPORT_BASE);
return -EBUSY;
}
a = inb(INPORT_SIGNATURE_PORT);
b = inb(INPORT_SIGNATURE_PORT);
c = inb(INPORT_SIGNATURE_PORT);
if (( a == b ) || ( a != c )) {
release_region(INPORT_BASE, INPORT_EXTENT);
printk(KERN_ERR "inport.c: Didn't find InPort mouse at %#x\n", INPORT_BASE);
return -ENODEV;
}
outb(INPORT_RESET, INPORT_CONTROL_PORT);
outb(INPORT_REG_MODE, INPORT_CONTROL_PORT);
outb(INPORT_MODE_BASE, INPORT_DATA_PORT);
input_register_device(&inport_dev);
printk(KERN_INFO "input: " INPORT_NAME " at %#x irq %d\n", INPORT_BASE, inport_irq);
return 0;
}
static void __exit inport_exit(void)
{
input_unregister_device(&inport_dev);
release_region(INPORT_BASE, INPORT_EXTENT);
}
module_init(inport_init);
module_exit(inport_exit);
