/*
* linux/drivers/hil/hilkbd.c
*
* Copyright (C) 1998 Philip Blundell <philb@gnu.org>
* Copyright (C) 1999 Matthew Wilcox <willy@bofh.ai>
* Copyright (C) 1999-2007 Helge Deller <deller@gmx.de>
*
* Very basic HP Human Interface Loop (HIL) driver.
* This driver handles the keyboard on HP300 (m68k) and on some
* HP700 (parisc) series machines.
*
*
* This file is subject to the terms and conditions of the GNU General Public
* License version 2. See the file COPYING in the main directory of this
* archive for more details.
*/
#include <linux/pci_ids.h>
#include <linux/ioport.h>
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/input.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/hil.h>
#include <linux/io.h>
#include <linux/spinlock.h>
#include <asm/irq.h>
#ifdef CONFIG_HP300
#include <asm/hwtest.h>
#endif
MODULE_AUTHOR("Philip Blundell, Matthew Wilcox, Helge Deller");
MODULE_DESCRIPTION("HIL keyboard driver (basic functionality)");
MODULE_LICENSE("GPL v2");
#if defined(CONFIG_PARISC)
#include <asm/io.h>
#include <asm/hardware.h>
#include <asm/parisc-device.h>
static unsigned long hil_base; /* HPA for the HIL device */
static unsigned int hil_irq;
#define HILBASE hil_base /* HPPA (parisc) port address */
#define HIL_DATA 0x800
#define HIL_CMD 0x801
#define HIL_IRQ hil_irq
#define hil_readb(p) gsc_readb(p)
#define hil_writeb(v,p) gsc_writeb((v),(p))
#elif defined(CONFIG_HP300)
#define HILBASE 0xf0428000UL /* HP300 (m68k) port address */
#define HIL_DATA 0x1
#define HIL_CMD 0x3
#define HIL_IRQ 2
#define hil_readb(p) readb(p)
#define hil_writeb(v,p) writeb((v),(p))
#else
#error "HIL is not supported on this platform"
#endif
/* HIL helper functions */
#define hil_busy() (hil_readb(HILBASE + HIL_CMD) & HIL_BUSY)
#define hil_data_available() (hil_readb(HILBASE + HIL_CMD) & HIL_DATA_RDY)
#define hil_status() (hil_readb(HILBASE + HIL_CMD))
#define hil_command(x) do { hil_writeb((x), HILBASE + HIL_CMD); } while (0)
#define hil_read_data() (hil_readb(HILBASE + HIL_DATA))
#define hil_write_data(x) do { hil_writeb((x), HILBASE + HIL_DATA); } while (0)
/* HIL constants */
#define HIL_BUSY 0x02
#define HIL_DATA_RDY 0x01
#define HIL_SETARD 0xA0 /* set auto-repeat delay */
#define HIL_SETARR 0xA2 /* set auto-repeat rate */
#define HIL_SETTONE 0xA3 /* set tone generator */
#define HIL_CNMT 0xB2 /* clear nmi */
#define HIL_INTON 0x5C /* Turn on interrupts. */
#define HIL_INTOFF 0x5D /* Turn off interrupts. */
#define HIL_READKBDSADR 0xF9
#define HIL_WRITEKBDSADR 0xE9
static unsigned int hphilkeyb_keycode[HIL_KEYCODES_SET1_TBLSIZE] __read_mostly =
{ HIL_KEYCODES_SET1 };
/* HIL structure */
static struct {
struct input_dev *dev;
unsigned int curdev;
unsigned char s;
unsigned char c;
int valid;
unsigned char data[16];
unsigned int ptr;
spinlock_t lock;
void *dev_id; /* native bus device */
} hil_dev;
static void poll_finished(void)
{
int down;
int key;
unsigned char scode;
switch (hil_dev.data[0]) {
case 0x40:
down = (hil_dev.data[1] & 1) == 0;
scode = hil_dev.data[1] >> 1;
key = hphilkeyb_keycode[scode];
input_report_key(hil_dev.dev, key, down);
break;
}
hil_dev.curdev = 0;
}
static inline void handle_status(unsigned char s, unsigned char c)
{
if (c & 0x8) {
/* End of block */
if (c & 0x10)
poll_finished();
} else {
if (c & 0x10) {
if (hil_dev.curdev)
poll_finished(); /* just in case */
hil_dev.curdev = c & 7;
hil_dev.ptr = 0;
}
}
}
static inline void handle_data(unsigned char s, unsigned char c)
{
if (hil_dev.curdev) {
hil_dev.data[hil_dev.ptr++] = c;
hil_dev.ptr &= 15;
}
}
/* handle HIL interrupts */
static irqreturn_t hil_interrupt(int irq, void *handle)
{
unsigned char s, c;
s = hil_status();
c = hil_read_data();
switch (s >> 4) {
case 0x5:
handle_status(s, c);
break;
case 0x6:
handle_data(s, c);
break;
case 0x4:
hil_dev.s = s;
hil_dev.c = c;
mb();
hil_dev.valid = 1;
break;
}
return IRQ_HANDLED;
}
/* send a command to the HIL */
static void hil_do(unsigned char cmd, unsigned char *data, unsigned int len)
{
unsigned long flags;
spin_lock_irqsave(&hil_dev.lock, flags);
while (hil_busy())
/* wait */;
hil_command(cmd);
while (len--) {
while (hil_busy())
/* wait */;
hil_write_data(*(data++));
}
spin_unlock_irqrestore(&hil_dev.lock, flags);
}
/* initialise HIL */
static int __init
hil_keyb_init(void)
{
unsigned char c;
unsigned int i, kbid;
wait_queue_head_t hil_wait;
int err;
if (hil_dev.dev) {
return -ENODEV; /* already initialized */
}
spin_lock_init(&hil_dev.lock);
hil_dev.dev = input_allocate_device();
if (!hil_dev.dev)
return -ENOMEM;
#if defined(CONFIG_HP300)
if (!hwreg_present((void *)(HILBASE + HIL_DATA))) {
printk(KERN_ERR "HIL: hardware register was not found\n");
err = -ENODEV;
goto err1;
}
if (!request_region(HILBASE + HIL_DATA, 2, "hil")) {
printk(KERN_ERR "HIL: IOPORT region already used\n");
err = -EIO;
goto err1;
}
#endif
err = request_irq(HIL_IRQ, hil_interrupt, 0, "hil", hil_dev.dev_id);
if (err) {
printk(KERN_ERR "HIL: Can't get IRQ\n");
goto err2;
}
/* Turn on interrupts */
hil_do(HIL_INTON, NULL, 0);
/* Look for keyboards */
hil_dev.valid = 0; /* clear any pending data */
hil_do(HIL_READKBDSADR, NULL, 0);
init_waitqueue_head(&hil_wait);
wait_event_interruptible_timeout(hil_wait, hil_dev.valid, 3*HZ);
if (!hil_dev.valid) {
printk(KERN_WARNING "HIL: timed out, assuming no keyboard present\n");
}
c = hil_dev.c;
hil_dev.valid = 0;
if (c == 0) {
kbid = -1;
printk(KERN_WARNING "HIL: no keyboard present\n");
} else {
kbid = ffz(~c);
printk(KERN_INFO "HIL: keyboard found at id %d\n", kbid);
}
/* set it to raw mode */
c = 0;
hil_do(HIL_WRITEKBDSADR, &c, 1);
for (i = 0; i < HIL_KEYCODES_SET1_TBLSIZE; i++)
if (hphilkeyb_keycode[i] != KEY_RESERVED)
set_bit(hphilkeyb_keycode[i], hil_dev.dev->keybit);
hil_dev.dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
hil_dev.dev->ledbit[0] = BIT(LED_NUML) | BIT(LED_CAPSL) | BIT(LED_SCROLLL);
hil_dev.dev->keycodemax = HIL_KEYCODES_SET1_TBLSIZE;
hil_dev.dev->keycodesize= sizeof(hphilkeyb_keycode[0]);
hil_dev.dev->keycode = hphilkeyb_keycode;
hil_dev.dev->name = "HIL keyboard";
hil_dev.dev->phys = "hpkbd/input0";
hil_dev.dev->id.bustype = BUS_HIL;
hil_dev.dev->id.vendor = PCI_VENDOR_ID_HP;
hil_dev.dev->id.product = 0x0001;
hil_dev.dev->id.version = 0x0010;
err = input_register_device(hil_dev.dev);
if (err) {
printk(KERN_ERR "HIL: Can't register device\n");
goto err3;
}
printk(KERN_INFO "input: %s, ID %d at 0x%08lx (irq %d) found and attached\n",
hil_dev.dev->name, kbid, HILBASE, HIL_IRQ);
return 0;
err3:
hil_do(HIL_INTOFF, NULL, 0);
disable_irq(HIL_IRQ);
free_irq(HIL_IRQ, hil_dev.dev_id);
err2:
#if defined(CONFIG_HP300)
release_region(HILBASE + HIL_DATA, 2);
err1:
#endif
input_free_device(hil_dev.dev);
hil_dev.dev = NULL;
return err;
}
#if defined(CONFIG_PARISC)
static int __init
hil_init_chip(struct parisc_device *dev)
{
if (!dev->irq) {
printk(KERN_WARNING "HIL: IRQ not found for HIL bus at 0x%08lx\n", dev->hpa.start);
return -ENODEV;
}
hil_base = dev->hpa.start;
hil_irq = dev->irq;
hil_dev.dev_id = dev;
printk(KERN_INFO "Found HIL bus at 0x%08lx, IRQ %d\n", hil_base, hil_irq);
return hil_keyb_init();
}
static struct parisc_device_id hil_tbl[] = {
{ HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00073 },
{ 0, }
};
MODULE_DEVICE_TABLE(parisc, hil_tbl);
static struct parisc_driver hil_driver = {
.name = "hil",
.id_table = hil_tbl,
.probe = hil_init_chip,
};
#endif /* CONFIG_PARISC */
static int __init hil_init(void)
{
#if defined(CONFIG_PARISC)
return register_parisc_driver(&hil_driver);
#else
return hil_keyb_init();
#endif
}
static void __exit hil_exit(void)
{
if (HIL_IRQ) {
disable_irq(HIL_IRQ);
free_irq(HIL_IRQ, hil_dev.dev_id);
}
/* Turn off interrupts */
hil_do(HIL_INTOFF, NULL, 0);
input_unregister_device(hil_dev.dev);
hil_dev.dev = NULL;
#if defined(CONFIG_PARISC)
unregister_parisc_driver(&hil_driver);
#else
release_region(HILBASE+HIL_DATA, 2);
#endif
}
module_init(hil_init);
module_exit(hil_exit);
