#
# Input core configuration
#
menuconfig INPUT_KEYBOARD
bool "Keyboards" if EXPERT || !X86
default y
help
Say Y here, and a list of supported keyboards will be displayed.
This option doesn't affect the kernel.
If unsure, say Y.
if INPUT_KEYBOARD
config KEYBOARD_ADP5520
tristate "Keypad Support for ADP5520 PMIC"
depends on PMIC_ADP5520
help
This option enables support for the keypad scan matrix
on Analog Devices ADP5520 PMICs.
To compile this driver as a module, choose M here: the module will
be called adp5520-keys.
config KEYBOARD_ADP5588
tristate "ADP5588/87 I2C QWERTY Keypad and IO Expander"
depends on I2C
help
Say Y here if you want to use a ADP5588/87 attached to your
system I2C bus.
To compile this driver as a module, choose M here: the
module will be called adp5588-keys.
config KEYBOARD_AMIGA
tristate "Amiga keyboard"
depends on AMIGA
help
Say Y here if you are running Linux on any AMIGA and have a keyboard
attached.
To compile this driver as a module, choose M here: the
module will be called amikbd.
config ATARI_KBD_CORE
bool
config KEYBOARD_ATARI
tristate "Atari keyboard"
depends on ATARI
select ATARI_KBD_CORE
help
Say Y here if you are running Linux on any Atari and have a keyboard
attached.
To compile this driver as a module, choose M here: the
module will be called atakbd.
config KEYBOARD_ATKBD
tristate "AT keyboard" if EXPERT || !X86
default y
select SERIO
select SERIO_LIBPS2
select SERIO_I8042 if X86
select SERIO_GSCPS2 if GSC
help
Say Y here if you want to use a standard AT or PS/2 keyboard. Usually
you'll need this, unless you have a different type keyboard (USB, ADB
or other). This also works for AT and PS/2 keyboards connected over a
PS/2 to serial converter.
If unsure, say Y.
To compile this driver as a module, choose M here: the
module will be called atkbd.
config KEYBOARD_ATKBD_HP_KEYCODES
bool "Use HP keyboard scancodes"
depends on PARISC && KEYBOARD_ATKBD
default y
help
Say Y here if you have a PA-RISC machine and want to use an AT or
PS/2 keyboard, and your keyboard uses keycodes that are specific to
PA-RISC keyboards.
Say N if you use a standard keyboard.
config KEYBOARD_ATKBD_RDI_KEYCODES
bool "Use PrecisionBook keyboard scancodes"
depends on KEYBOARD_ATKBD_HP_KEYCODES
default n
help
If you have an RDI PrecisionBook, say Y here if you want to use its
built-in keyboard (as opposed to an external keyboard).
The PrecisionBook has five keys that conflict with those used by most
AT and PS/2 keyboards. These are as follows:
PrecisionBook Standard AT or PS/2
F1 F12
Left Ctrl Left Alt
Caps Lock Left Ctrl
Right Ctrl Caps Lock
Left 102nd key (the key to the right of Left Shift)
If you say N here, and use the PrecisionBook keyboard, then each key
in the left-hand column will be interpreted as the corresponding key
in the right-hand column.
If you say Y here, and use an external keyboard, then each key in the
right-hand column will be interpreted as the key shown in the
left-hand column.
config KEYBOARD_QT1070
tristate "Atmel AT42QT1070 Touch Sensor Chip"
depends on I2C
help
Say Y here if you want to use Atmel AT42QT1070 QTouch
Sensor chip as input device.
To compile this driver as a module, choose M here:
the module will be called qt1070
config KEYBOARD_QT2160
tristate "Atmel AT42QT2160 Touch Sensor Chip"
depends on I2C && EXPERIMENTAL
help
If you say yes here you get support for Atmel AT42QT2160 Touch
Sensor chip as a keyboard input.
This driver can also be built as a module. If so, the module
will be called qt2160.
config KEYBOARD_BFIN
tristate "Blackfin BF54x keypad support"
depends on (BF54x && !BF544)
help
Say Y here if you want to use the BF54x keypad.
To compile this driver as a module, choose M here: the
module will be called bf54x-keys.
config KEYBOARD_LKKBD
tristate "DECstation/VAXstation LK201/LK401 keyboard"
select SERIO
help
Say Y here if you want to use a LK201 or LK401 style serial
keyboard. This keyboard is also useable on PCs if you attach
it with the inputattach program. The connector pinout is
described within lkkbd.c.
To compile this driver as a module, choose M here: the
module will be called lkkbd.
config KEYBOARD_EP93XX
tristate "EP93xx Matrix Keypad support"
depends on ARCH_EP93XX
help
Say Y here to enable the matrix keypad on the Cirrus EP93XX.
To compile this driver as a module, choose M here: the
module will be called ep93xx_keypad.
config KEYBOARD_GPIO
tristate "GPIO Buttons"
depends on GENERIC_GPIO
help
This driver implements support for buttons connected
to GPIO pins of various CPUs (and some other chips).
Say Y here if your device has buttons connected
directly to such GPIO pins. Your board-specific
setup logic must also provide a platform device,
with configuration data saying which GPIOs are used.
To compile this driver as a module, choose M here: the
module will be called gpio_keys.
config KEYBOARD_GPIO_POLLED
tristate "Polled GPIO buttons"
depends on GENERIC_GPIO
select INPUT_POLLDEV
help
This driver implements support for buttons connected
to GPIO pins that are not capable of generating interrupts.
Say Y here if your device has buttons connected
directly to such GPIO pins. Your board-specific
setup logic must also provide a platform device,
with configuration data saying which GPIOs are used.
To compile this driver as a module, choose M here: the
module will be called gpio_keys_polled.
config KEYBOARD_TCA6416
tristate "TCA6416/TCA6408A Keypad Support"
depends on I2C
help
This driver implements basic keypad functionality
for keys connected through TCA6416/TCA6408A IO expanders.
Say Y here if your device has keys connected to
TCA6416/TCA6408A IO expander. Your board-specific setup logic
must also provide pin-mask details(of which TCA6416 pins
are used for keypad).
If enabled the entire TCA6416 device will be managed through
this driver.
To compile this driver as a module, choose M here: the
module will be called tca6416_keypad.
config KEYBOARD_MATRIX
tristate "GPIO driven matrix keypad support"
depends on GENERIC_GPIO
help
Enable support for GPIO driven matrix keypad.
To compile this driver as a module, choose M here: the
module will be called matrix_keypad.
config KEYBOARD_HIL_OLD
tristate "HP HIL keyboard support (simple driver)"
depends on GSC || HP300
default y
help
The "Human Interface Loop" is a older, 8-channel USB-like
controller used in several Hewlett Packard models. This driver
was adapted from the one written for m68k/hp300, and implements
support for a keyboard attached to the HIL port, but not for
any other types of HIL input devices like mice or tablets.
However, it has been thoroughly tested and is stable.
If you want full HIL support including support for multiple
keyboards, mice, and tablets, you have to enable the
"HP System Device Controller i8042 Support" in the input/serio
submenu.
config KEYBOARD_HIL
tristate "HP HIL keyboard/pointer support"
depends on GSC || HP300
default y
select HP_SDC
select HIL_MLC
select SERIO
help
The "Human Interface Loop" is a older, 8-channel USB-like
controller used in several Hewlett Packard models.
This driver implements support for HIL-keyboards and pointing
devices (mice, tablets, touchscreens) attached
to your machine, so normally you should say Y here.
config KEYBOARD_HP6XX
tristate "HP Jornada 6xx keyboard"
depends on SH_HP6XX
select INPUT_POLLDEV
help
Say Y here if you have a HP Jornada 620/660/680/690 and want to
support the built-in keyboard.
To compile this driver as a module, choose M here: the
module will be called jornada680_kbd.
config KEYBOARD_HP7XX
tristate "HP Jornada 7xx keyboard"
depends on SA1100_JORNADA720_SSP && SA1100_SSP
help
Say Y here if you have a HP Jornada 710/720/728 and want to
support the built-in keyboard.
To compile this driver as a module, choose M here: the
module will be called jornada720_kbd.
config KEYBOARD_LM8323
tristate "LM8323 keypad chip"
depends on I2C
depends on LEDS_CLASS
help
If you say yes here you get support for the National Semiconductor
LM8323 keypad controller.
To compile this driver as a module, choose M here: the
module will be called lm8323.
config KEYBOARD_LOCOMO
tristate "LoCoMo Keyboard Support"
depends on SHARP_LOCOMO
help
Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA
To compile this driver as a module, choose M here: the
module will be called locomokbd.
config KEYBOARD_MAPLE
tristate "Maple bus keyboard"
depends on SH_DREAMCAST && MAPLE
help
Say Y here if you have a Dreamcast console running Linux and have
a keyboard attached to its Maple bus.
To compile this driver as a module, choose M here: the
module will be called maple_keyb.
config KEYBOARD_MAX7359
tristate "Maxim MAX7359 Key Switch Controller"
depends on I2C
help
If you say yes here you get support for the Maxim MAX7359 Key
Switch Controller chip. This providers microprocessors with
management of up to 64 key switches
To compile this driver as a module, choose M here: the
module will be called max7359_keypad.
config KEYBOARD_MCS
tristate "MELFAS MCS Touchkey"
depends on I2C
help
Say Y here if you have the MELFAS MCS5000/5080 touchkey controller
chip in your system.
If unsure, say N.
To compile this driver as a module, choose M here: the
module will be called mcs_touchkey.
config KEYBOARD_IMX
tristate "IMX keypad support"
depends on ARCH_MXC
help
Enable support for IMX keypad port.
To compile this driver as a module, choose M here: the
module will be called imx_keypad.
config KEYBOARD_NEWTON
tristate "Newton keyboard"
select SERIO
help
Say Y here if you have a Newton keyboard on a serial port.
To compile this driver as a module, choose M here: the
module will be called newtonkbd.
config KEYBOARD_NOMADIK
tristate "ST-Ericsson Nomadik SKE keyboard"
depends on PLAT_NOMADIK
help
Say Y here if you want to use a keypad provided on the SKE controller
used on the Ux500 and Nomadik platforms
To compile this driver as a module, choose M here: the
module will be called nmk-ske-keypad.
config KEYBOARD_TEGRA
tristate "NVIDIA Tegra internal matrix keyboard controller support"
depends on ARCH_TEGRA
help
Say Y here if you want to use a matrix keyboard connected directly
to the internal keyboard controller on Tegra SoCs.
To compile this driver as a module, choose M here: the
module will be called tegra-kbc.
config KEYBOARD_OPENCORES
tristate "OpenCores Keyboard Controller"
help
Say Y here if you want to use the OpenCores Keyboard Controller
http://www.opencores.org/project,keyboardcontroller
To compile this driver as a module, choose M here; the
module will be called opencores-kbd.
config KEYBOARD_PXA27x
tristate "PXA27x/PXA3xx keypad support"
depends on PXA27x || PXA3xx || ARCH_MMP
help
Enable support for PXA27x/PXA3xx keypad controller.
To compile this driver as a module, choose M here: the
module will be called pxa27x_keypad.
config KEYBOARD_PXA930_ROTARY
tristate "PXA930/PXA935 Enhanced Rotary Controller Support"
depends on CPU_PXA930 || CPU_PXA935
help
Enable support for PXA930/PXA935 Enhanced Rotary Controller.
To compile this driver as a module, choose M here: the
module will be called pxa930_rotary.
config KEYBOARD_SAMSUNG
tristate "Samsung keypad support"
depends on SAMSUNG_DEV_KEYPAD
help
Say Y here if you want to use the Samsung keypad.
To compile this driver as a module, choose M here: the
module will be called samsung-keypad.
config KEYBOARD_STOWAWAY
tristate "Stowaway keyboard"
select SERIO
help
Say Y here if you have a Stowaway keyboard on a serial port.
Stowaway compatible keyboards like Dicota Input-PDA keyboard
are also supported by this driver.
To compile this driver as a module, choose M here: the
module will be called stowaway.
config KEYBOARD_SUNKBD
tristate "Sun Type 4 and Type 5 keyboard"
select SERIO
help
Say Y here if you want to use a Sun Type 4 or Type 5 keyboard,
connected either to the Sun keyboard connector or to an serial
(RS-232) port via a simple adapter.
To compile this driver as a module, choose M here: the
module will be called sunkbd.
config KEYBOARD_SH_KEYSC
tristate "SuperH KEYSC keypad support"
depends on SUPERH || ARCH_SHMOBILE
help
Say Y here if you want to use a keypad attached to the KEYSC block
on SuperH processors such as sh7722 and sh7343.
To compile this driver as a module, choose M here: the
module will be called sh_keysc.
config KEYBOARD_STMPE
tristate "STMPE keypad support"
depends on MFD_STMPE
help
Say Y here if you want to use the keypad controller on STMPE I/O
expanders.
To compile this driver as a module, choose M here: the module will be
called stmpe-keypad.
config KEYBOARD_DAVINCI
tristate "TI DaVinci Key Scan"
depends on ARCH_DAVINCI_DM365
help
Say Y to enable keypad module support for the TI DaVinci
platforms (DM365).
To compile this driver as a module, choose M here: the
module will be called davinci_keyscan.
config KEYBOARD_OMAP
tristate "TI OMAP keypad support"
depends on (ARCH_OMAP1 || ARCH_OMAP2)
help
Say Y here if you want to use the OMAP keypad.
To compile this driver as a module, choose M here: the
module will be called omap-keypad.
config KEYBOARD_OMAP4
tristate "TI OMAP4 keypad support"
depends on ARCH_OMAP4
help
Say Y here if you want to use the OMAP4 keypad.
To compile this driver as a module, choose M here: the
module will be called omap4-keypad.
config KEYBOARD_SPEAR
tristate "ST SPEAR keyboard support"
depends on PLAT_SPEAR
help
Say Y here if you want to use the SPEAR keyboard.
To compile this driver as a module, choose M here: the
module will be called spear-keboard.
config KEYBOARD_TC3589X
tristate "TC3589X Keypad support"
depends on MFD_TC3589X
help
Say Y here if you want to use the keypad controller on
TC35892/3 I/O expander.
To compile this driver as a module, choose M here: the
module will be called tc3589x-keypad.
config KEYBOARD_TNETV107X
tristate "TI TNETV107X keypad support"
depends on ARCH_DAVINCI_TNETV107X
help
Say Y here if you want to use the TNETV107X keypad.
To compile this driver as a module, choose M here: the
module will be called tnetv107x-keypad.
config KEYBOARD_TWL4030
tristate "TI TWL4030/TWL5030/TPS659x0 keypad support"
depends on TWL4030_CORE
help
Say Y here if your board use the keypad controller on
TWL4030 family chips. It's safe to say enable this
even on boards that don't use the keypad controller.
To compile this driver as a module, choose M here: the
module will be called twl4030_keypad.
config KEYBOARD_XTKBD
tristate "XT keyboard"
select SERIO
help
Say Y here if you want to use the old IBM PC/XT keyboard (or
compatible) on your system. This is only possible with a
parallel port keyboard adapter, you cannot connect it to the
keyboard port on a PC that runs Linux.
To compile this driver as a module, choose M here: the
module will be called xtkbd.
config KEYBOARD_W90P910
tristate "W90P910 Matrix Keypad support"
depends on ARCH_W90X900
help
Say Y here to enable the matrix keypad on evaluation board
based on W90P910.
To compile this driver as a module, choose M here: the
module will be called w90p910_keypad.
endif
