/*
* AMD 755/756/766/8111 and nVidia nForce/2/2s/3/3s/CK804/MCP04
* IDE driver for Linux.
*
* Copyright (c) 2000-2002 Vojtech Pavlik
* Copyright (c) 2007 Bartlomiej Zolnierkiewicz
*
* Based on the work of:
* Andre Hedrick
*/
/*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/ide.h>
#include "ide-timing.h"
enum {
AMD_IDE_CONFIG = 0x41,
AMD_CABLE_DETECT = 0x42,
AMD_DRIVE_TIMING = 0x48,
AMD_8BIT_TIMING = 0x4e,
AMD_ADDRESS_SETUP = 0x4c,
AMD_UDMA_TIMING = 0x50,
};
static unsigned int amd_80w;
static unsigned int amd_clock;
static char *amd_dma[] = { "16", "25", "33", "44", "66", "100", "133" };
static unsigned char amd_cyc2udma[] = { 6, 6, 5, 4, 0, 1, 1, 2, 2, 3, 3, 3, 3, 3, 3, 7 };
static inline u8 amd_offset(struct pci_dev *dev)
{
return (dev->vendor == PCI_VENDOR_ID_NVIDIA) ? 0x10 : 0;
}
/*
* amd_set_speed() writes timing values to the chipset registers
*/
static void amd_set_speed(struct pci_dev *dev, u8 dn, u8 udma_mask,
struct ide_timing *timing)
{
u8 t = 0, offset = amd_offset(dev);
pci_read_config_byte(dev, AMD_ADDRESS_SETUP + offset, &t);
t = (t & ~(3 << ((3 - dn) << 1))) | ((FIT(timing->setup, 1, 4) - 1) << ((3 - dn) << 1));
pci_write_config_byte(dev, AMD_ADDRESS_SETUP + offset, t);
pci_write_config_byte(dev, AMD_8BIT_TIMING + offset + (1 - (dn >> 1)),
((FIT(timing->act8b, 1, 16) - 1) << 4) | (FIT(timing->rec8b, 1, 16) - 1));
pci_write_config_byte(dev, AMD_DRIVE_TIMING + offset + (3 - dn),
((FIT(timing->active, 1, 16) - 1) << 4) | (FIT(timing->recover, 1, 16) - 1));
switch (udma_mask) {
case ATA_UDMA2: t = timing->udma ? (0xc0 | (FIT(timing->udma, 2, 5) - 2)) : 0x03; break;
case ATA_UDMA4: t = timing->udma ? (0xc0 | amd_cyc2udma[FIT(timing->udma, 2, 10)]) : 0x03; break;
case ATA_UDMA5: t = timing->udma ? (0xc0 | amd_cyc2udma[FIT(timing->udma, 1, 10)]) : 0x03; break;
case ATA_UDMA6: t = timing->udma ? (0xc0 | amd_cyc2udma[FIT(timing->udma, 1, 15)]) : 0x03; break;
default: return;
}
pci_write_config_byte(dev, AMD_UDMA_TIMING + offset + (3 - dn), t);
}
/*
* amd_set_drive() computes timing values and configures the chipset
* to a desired transfer mode. It also can be called by upper layers.
*/
static void amd_set_drive(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = drive->hwif;
struct pci_dev *dev = to_pci_dev(hwif->dev);
ide_drive_t *peer = hwif->drives + (~drive->dn & 1);
struct ide_timing t, p;
int T, UT;
u8 udma_mask = hwif->ultra_mask;
T = 1000000000 / amd_clock;
UT = (udma_mask == ATA_UDMA2) ? T : (T / 2);
ide_timing_compute(drive, speed, &t, T, UT);
if (peer->present) {
ide_timing_compute(peer, peer->current_speed, &p, T, UT);
ide_timing_merge(&p, &t, &t, IDE_TIMING_8BIT);
}
if (speed == XFER_UDMA_5 && amd_clock <= 33333) t.udma = 1;
if (speed == XFER_UDMA_6 && amd_clock <= 33333) t.udma = 15;
amd_set_speed(dev, drive->dn, udma_mask, &t);
}
/*
* amd_set_pio_mode() is a callback from upper layers for PIO-only tuning.
*/
static void amd_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
amd_set_drive(drive, XFER_PIO_0 + pio);
}
static void __devinit amd7409_cable_detect(struct pci_dev *dev,
const char *name)
{
/* no host side cable detection */
amd_80w = 0x03;
}
static void __devinit amd7411_cable_detect(struct pci_dev *dev,
const char *name)
{
int i;
u32 u = 0;
u8 t = 0, offset = amd_offset(dev);
pci_read_config_byte(dev, AMD_CABLE_DETECT + offset, &t);
pci_read_config_dword(dev, AMD_UDMA_TIMING + offset, &u);
amd_80w = ((t & 0x3) ? 1 : 0) | ((t & 0xc) ? 2 : 0);
for (i = 24; i >= 0; i -= 8)
if (((u >> i) & 4) && !(amd_80w & (1 << (1 - (i >> 4))))) {
printk(KERN_WARNING "%s: BIOS didn't set cable bits "
"correctly. Enabling workaround.\n",
name);
amd_80w |= (1 << (1 - (i >> 4)));
}
}
/*
* The initialization callback. Initialize drive independent registers.
*/
static unsigned int __devinit init_chipset_amd74xx(struct pci_dev *dev,
const char *name)
{
u8 t = 0, offset = amd_offset(dev);
/*
* Check 80-wire cable presence.
*/
if (dev->vendor == PCI_VENDOR_ID_AMD &&
dev->device == PCI_DEVICE_ID_AMD_COBRA_7401)
; /* no UDMA > 2 */
else if (dev->vendor == PCI_VENDOR_ID_AMD &&
dev->device == PCI_DEVICE_ID_AMD_VIPER_7409)
amd7409_cable_detect(dev, name);
else
amd7411_cable_detect(dev, name);
/*
* Take care of prefetch & postwrite.
*/
pci_read_config_byte(dev, AMD_IDE_CONFIG + offset, &t);
/*
* Check for broken FIFO support.
*/
if (dev->vendor == PCI_VENDOR_ID_AMD &&
dev->vendor == PCI_DEVICE_ID_AMD_VIPER_7411)
t &= 0x0f;
else
t |= 0xf0;
pci_write_config_byte(dev, AMD_IDE_CONFIG + offset, t);
/*
* Determine the system bus clock.
*/
amd_clock = system_bus_clock() * 1000;
switch (amd_clock) {
case 33000: amd_clock = 33333; break;
case 37000: amd_clock = 37500; break;
case 41000: amd_clock = 41666; break;
}
if (amd_clock < 20000 || amd_clock > 50000) {
printk(KERN_WARNING "%s: User given PCI clock speed impossible (%d), using 33 MHz instead.\n",
name, amd_clock);
amd_clock = 33333;
}
return dev->irq;
}
static u8 __devinit amd_cable_detect(ide_hwif_t *hwif)
{
if ((amd_80w >> hwif->channel) & 1)
return ATA_CBL_PATA80;
else
return ATA_CBL_PATA40;
}
static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
if (hwif->irq == 0) /* 0 is bogus but will do for now */
hwif->irq = pci_get_legacy_ide_irq(dev, hwif->channel);
hwif->set_pio_mode = &amd_set_pio_mode;
hwif->set_dma_mode = &amd_set_drive;
hwif->cable_detect = amd_cable_detect;
}
#define IDE_HFLAGS_AMD \
(IDE_HFLAG_PIO_NO_BLACKLIST | \
IDE_HFLAG_PIO_NO_DOWNGRADE | \
IDE_HFLAG_ABUSE_SET_DMA_MODE | \
IDE_HFLAG_POST_SET_MODE | \
IDE_HFLAG_IO_32BIT | \
IDE_HFLAG_UNMASK_IRQS | \
IDE_HFLAG_BOOTABLE)
#define DECLARE_AMD_DEV(name_str, swdma, udma) \
{ \
.name = name_str, \
.init_chipset = init_chipset_amd74xx, \
.init_hwif = init_hwif_amd74xx, \
.enablebits = {{0x40,0x02,0x02}, {0x40,0x01,0x01}}, \
.host_flags = IDE_HFLAGS_AMD, \
.pio_mask = ATA_PIO5, \
.swdma_mask = swdma, \
.mwdma_mask = ATA_MWDMA2, \
.udma_mask = udma, \
}
#define DECLARE_NV_DEV(name_str, udma) \
{ \
.name = name_str, \
.init_chipset = init_chipset_amd74xx, \
.init_hwif = init_hwif_amd74xx, \
.enablebits = {{0x50,0x02,0x02}, {0x50,0x01,0x01}}, \
.host_flags = IDE_HFLAGS_AMD, \
.pio_mask = ATA_PIO5, \
.swdma_mask = ATA_SWDMA2, \
.mwdma_mask = ATA_MWDMA2, \
.udma_mask = udma, \
}
static const struct ide_port_info amd74xx_chipsets[] __devinitdata = {
/* 0 */ DECLARE_AMD_DEV("AMD7401", 0x00, ATA_UDMA2),
/* 1 */ DECLARE_AMD_DEV("AMD7409", ATA_SWDMA2, ATA_UDMA4),
/* 2 */ DECLARE_AMD_DEV("AMD7411", ATA_SWDMA2, ATA_UDMA5),
/* 3 */ DECLARE_AMD_DEV("AMD7441", ATA_SWDMA2, ATA_UDMA5),
/* 4 */ DECLARE_AMD_DEV("AMD8111", ATA_SWDMA2, ATA_UDMA6),
/* 5 */ DECLARE_NV_DEV("NFORCE", ATA_UDMA5),
/* 6 */ DECLARE_NV_DEV("NFORCE2", ATA_UDMA6),
/* 7 */ DECLARE_NV_DEV("NFORCE2-U400R", ATA_UDMA6),
/* 8 */ DECLARE_NV_DEV("NFORCE2-U400R-SATA", ATA_UDMA6),
/* 9 */ DECLARE_NV_DEV("NFORCE3-150", ATA_UDMA6),
/* 10 */ DECLARE_NV_DEV("NFORCE3-250", ATA_UDMA6),
/* 11 */ DECLARE_NV_DEV("NFORCE3-250-SATA", ATA_UDMA6),
/* 12 */ DECLARE_NV_DEV("NFORCE3-250-SATA2", ATA_UDMA6),
/* 13 */ DECLARE_NV_DEV("NFORCE-CK804", ATA_UDMA6),
/* 14 */ DECLARE_NV_DEV("NFORCE-MCP04", ATA_UDMA6),
/* 15 */ DECLARE_NV_DEV("NFORCE-MCP51", ATA_UDMA6),
/* 16 */ DECLARE_NV_DEV("NFORCE-MCP55", ATA_UDMA6),
/* 17 */ DECLARE_NV_DEV("NFORCE-MCP61", ATA_UDMA6),
/* 18 */ DECLARE_NV_DEV("NFORCE-MCP65", ATA_UDMA6),
/* 19 */ DECLARE_NV_DEV("NFORCE-MCP67", ATA_UDMA6),
/* 20 */ DECLARE_NV_DEV("NFORCE-MCP73", ATA_UDMA6),
/* 21 */ DECLARE_NV_DEV("NFORCE-MCP77", ATA_UDMA6),
/* 22 */ DECLARE_AMD_DEV("AMD5536", ATA_SWDMA2, ATA_UDMA5),
};
static int __devinit amd74xx_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
struct ide_port_info d;
u8 idx = id->driver_data;
d = amd74xx_chipsets[idx];
/*
* Check for bad SWDMA and incorrectly wired Serenade mainboards.
*/
if (idx == 1) {
if (dev->revision <= 7)
d.swdma_mask = 0;
d.host_flags |= IDE_HFLAG_CLEAR_SIMPLEX;
} else if (idx == 4) {
if (dev->subsystem_vendor == PCI_VENDOR_ID_AMD &&
dev->subsystem_device == PCI_DEVICE_ID_AMD_SERENADE)
d.udma_mask = ATA_UDMA5;
}
printk(KERN_INFO "%s: %s (rev %02x) UDMA%s controller\n",
d.name, pci_name(dev), dev->revision,
amd_dma[fls(d.udma_mask) - 1]);
return ide_setup_pci_device(dev, &d);
}
static const struct pci_device_id amd74xx_pci_tbl[] = {
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_COBRA_7401), 0 },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_VIPER_7409), 1 },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_VIPER_7411), 2 },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_OPUS_7441), 3 },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_8111_IDE), 4 },
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_IDE), 5 },
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE), 6 },
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2S_IDE), 7 },
#ifdef CONFIG_BLK_DEV_IDE_SATA
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA), 8 },
#endif
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE), 9 },
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_IDE), 10 },
#ifdef CONFIG_BLK_DEV_IDE_SATA
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA), 11 },
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2), 12 },
#endif
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE), 13 },
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE), 14 },
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE), 15 },
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE), 16 },
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE), 17 },
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_IDE), 18 },
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE), 19 },
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_IDE), 20 },
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP77_IDE), 21 },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5536_IDE), 22 },
{ 0, },
};
MODULE_DEVICE_TABLE(pci, amd74xx_pci_tbl);
static struct pci_driver driver = {
.name = "AMD_IDE",
.id_table = amd74xx_pci_tbl,
.probe = amd74xx_probe,
};
static int __init amd74xx_ide_init(void)
{
return ide_pci_register_driver(&driver);
}
module_init(amd74xx_ide_init);
MODULE_AUTHOR("Vojtech Pavlik");
MODULE_DESCRIPTION("AMD PCI IDE driver");
MODULE_LICENSE("GPL");
