/*
* linux/drivers/ide/legacy/gayle.c -- Amiga Gayle IDE Driver
*
* Created 9 Jul 1997 by Geert Uytterhoeven
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive for
* more details.
*/
#include <linux/config.h>
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/blkdev.h>
#include <linux/hdreg.h>
#include <linux/ide.h>
#include <linux/init.h>
#include <linux/zorro.h>
#include <asm/setup.h>
#include <asm/amigahw.h>
#include <asm/amigaints.h>
#include <asm/amigayle.h>
/*
* Bases of the IDE interfaces
*/
#define GAYLE_BASE_4000 0xdd2020 /* A4000/A4000T */
#define GAYLE_BASE_1200 0xda0000 /* A1200/A600 and E-Matrix 530 */
/*
* Offsets from one of the above bases
*/
#define GAYLE_DATA 0x00
#define GAYLE_ERROR 0x06 /* see err-bits */
#define GAYLE_NSECTOR 0x0a /* nr of sectors to read/write */
#define GAYLE_SECTOR 0x0e /* starting sector */
#define GAYLE_LCYL 0x12 /* starting cylinder */
#define GAYLE_HCYL 0x16 /* high byte of starting cyl */
#define GAYLE_SELECT 0x1a /* 101dhhhh , d=drive, hhhh=head */
#define GAYLE_STATUS 0x1e /* see status-bits */
#define GAYLE_CONTROL 0x101a
static int gayle_offsets[IDE_NR_PORTS] __initdata = {
GAYLE_DATA, GAYLE_ERROR, GAYLE_NSECTOR, GAYLE_SECTOR, GAYLE_LCYL,
GAYLE_HCYL, GAYLE_SELECT, GAYLE_STATUS, -1, -1
};
/*
* These are at different offsets from the base
*/
#define GAYLE_IRQ_4000 0xdd3020 /* MSB = 1, Harddisk is source of */
#define GAYLE_IRQ_1200 0xda9000 /* interrupt */
/*
* Offset of the secondary port for IDE doublers
* Note that GAYLE_CONTROL is NOT available then!
*/
#define GAYLE_NEXT_PORT 0x1000
#ifndef CONFIG_BLK_DEV_IDEDOUBLER
#define GAYLE_NUM_HWIFS 1
#define GAYLE_NUM_PROBE_HWIFS GAYLE_NUM_HWIFS
#define GAYLE_HAS_CONTROL_REG 1
#define GAYLE_IDEREG_SIZE 0x2000
#else /* CONFIG_BLK_DEV_IDEDOUBLER */
#define GAYLE_NUM_HWIFS 2
#define GAYLE_NUM_PROBE_HWIFS (ide_doubler ? GAYLE_NUM_HWIFS : \
GAYLE_NUM_HWIFS-1)
#define GAYLE_HAS_CONTROL_REG (!ide_doubler)
#define GAYLE_IDEREG_SIZE (ide_doubler ? 0x1000 : 0x2000)
int ide_doubler = 0; /* support IDE doublers? */
#endif /* CONFIG_BLK_DEV_IDEDOUBLER */
/*
* Check and acknowledge the interrupt status
*/
static int gayle_ack_intr_a4000(ide_hwif_t *hwif)
{
unsigned char ch;
ch = z_readb(hwif->io_ports[IDE_IRQ_OFFSET]);
if (!(ch & GAYLE_IRQ_IDE))
return 0;
return 1;
}
static int gayle_ack_intr_a1200(ide_hwif_t *hwif)
{
unsigned char ch;
ch = z_readb(hwif->io_ports[IDE_IRQ_OFFSET]);
if (!(ch & GAYLE_IRQ_IDE))
return 0;
(void)z_readb(hwif->io_ports[IDE_STATUS_OFFSET]);
z_writeb(0x7c, hwif->io_ports[IDE_IRQ_OFFSET]);
return 1;
}
/*
* Probe for a Gayle IDE interface (and optionally for an IDE doubler)
*/
void __init gayle_init(void)
{
int a4000, i;
if (!MACH_IS_AMIGA)
return;
if ((a4000 = AMIGAHW_PRESENT(A4000_IDE)) || AMIGAHW_PRESENT(A1200_IDE))
goto found;
#ifdef CONFIG_ZORRO
if (zorro_find_device(ZORRO_PROD_MTEC_VIPER_MK_V_E_MATRIX_530_SCSI_IDE,
NULL))
goto found;
#endif
return;
found:
for (i = 0; i < GAYLE_NUM_PROBE_HWIFS; i++) {
unsigned long base, ctrlport, irqport;
ide_ack_intr_t *ack_intr;
hw_regs_t hw;
ide_hwif_t *hwif;
int index;
unsigned long phys_base, res_start, res_n;
if (a4000) {
phys_base = GAYLE_BASE_4000;
irqport = (unsigned long)ZTWO_VADDR(GAYLE_IRQ_4000);
ack_intr = gayle_ack_intr_a4000;
} else {
phys_base = GAYLE_BASE_1200;
irqport = (unsigned long)ZTWO_VADDR(GAYLE_IRQ_1200);
ack_intr = gayle_ack_intr_a1200;
}
/*
* FIXME: we now have selectable modes between mmio v/s iomio
*/
phys_base += i*GAYLE_NEXT_PORT;
res_start = ((unsigned long)phys_base) & ~(GAYLE_NEXT_PORT-1);
res_n = GAYLE_IDEREG_SIZE;
if (!request_mem_region(res_start, res_n, "IDE"))
continue;
base = (unsigned long)ZTWO_VADDR(phys_base);
ctrlport = GAYLE_HAS_CONTROL_REG ? (base + GAYLE_CONTROL) : 0;
ide_setup_ports(&hw, base, gayle_offsets,
ctrlport, irqport, ack_intr,
// &gayle_iops,
IRQ_AMIGA_PORTS);
index = ide_register_hw(&hw, &hwif);
if (index != -1) {
hwif->mmio = 2;
switch (i) {
case 0:
printk("ide%d: Gayle IDE interface (A%d style)\n", index,
a4000 ? 4000 : 1200);
break;
#ifdef CONFIG_BLK_DEV_IDEDOUBLER
case 1:
printk("ide%d: IDE doubler\n", index);
break;
#endif /* CONFIG_BLK_DEV_IDEDOUBLER */
}
} else
release_mem_region(res_start, res_n);
}
}
