/*
* gl518sm.c - Part of lm_sensors, Linux kernel modules for hardware
* monitoring
* Copyright (C) 1998, 1999 Frodo Looijaard <frodol@dds.nl> and
* Kyosti Malkki <kmalkki@cc.hut.fi>
* Copyright (C) 2004 Hong-Gunn Chew <hglinux@gunnet.org> and
* Jean Delvare <khali@linux-fr.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Ported to Linux 2.6 by Hong-Gunn Chew with the help of Jean Delvare
* and advice of Greg Kroah-Hartman.
*
* Notes about the port:
* Release 0x00 of the GL518SM chipset doesn't support reading of in0,
* in1 nor in2. The original driver had an ugly workaround to get them
* anyway (changing limits and watching alarms trigger and wear off).
* We did not keep that part of the original driver in the Linux 2.6
* version, since it was making the driver significantly more complex
* with no real benefit.
*
* History:
* 2004-01-28 Original port. (Hong-Gunn Chew)
* 2004-01-31 Code review and approval. (Jean Delvare)
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/i2c-sensor.h>
#include <linux/hwmon.h>
#include <linux/err.h>
/* Addresses to scan */
static unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END };
/* Insmod parameters */
SENSORS_INSMOD_2(gl518sm_r00, gl518sm_r80);
/* Many GL518 constants specified below */
/* The GL518 registers */
#define GL518_REG_CHIP_ID 0x00
#define GL518_REG_REVISION 0x01
#define GL518_REG_VENDOR_ID 0x02
#define GL518_REG_CONF 0x03
#define GL518_REG_TEMP_IN 0x04
#define GL518_REG_TEMP_MAX 0x05
#define GL518_REG_TEMP_HYST 0x06
#define GL518_REG_FAN_COUNT 0x07
#define GL518_REG_FAN_LIMIT 0x08
#define GL518_REG_VIN1_LIMIT 0x09
#define GL518_REG_VIN2_LIMIT 0x0a
#define GL518_REG_VIN3_LIMIT 0x0b
#define GL518_REG_VDD_LIMIT 0x0c
#define GL518_REG_VIN3 0x0d
#define GL518_REG_MISC 0x0f
#define GL518_REG_ALARM 0x10
#define GL518_REG_MASK 0x11
#define GL518_REG_INT 0x12
#define GL518_REG_VIN2 0x13
#define GL518_REG_VIN1 0x14
#define GL518_REG_VDD 0x15
/*
* Conversions. Rounding and limit checking is only done on the TO_REG
* variants. Note that you should be a bit careful with which arguments
* these macros are called: arguments may be evaluated more than once.
* Fixing this is just not worth it.
*/
#define RAW_FROM_REG(val) val
#define BOOL_FROM_REG(val) ((val)?0:1)
#define BOOL_TO_REG(val) ((val)?0:1)
#define TEMP_TO_REG(val) (SENSORS_LIMIT(((((val)<0? \
(val)-500:(val)+500)/1000)+119),0,255))
#define TEMP_FROM_REG(val) (((val) - 119) * 1000)
static inline u8 FAN_TO_REG(long rpm, int div)
{
long rpmdiv;
if (rpm == 0)
return 0;
rpmdiv = SENSORS_LIMIT(rpm, 1, 1920000) * div;
return SENSORS_LIMIT((960000 + rpmdiv / 2) / rpmdiv, 1, 255);
}
#define FAN_FROM_REG(val,div) ((val)==0 ? 0 : (960000/((val)*(div))))
#define IN_TO_REG(val) (SENSORS_LIMIT((((val)+9)/19),0,255))
#define IN_FROM_REG(val) ((val)*19)
#define VDD_TO_REG(val) (SENSORS_LIMIT((((val)*4+47)/95),0,255))
#define VDD_FROM_REG(val) (((val)*95+2)/4)
#define DIV_TO_REG(val) ((val)==4?2:(val)==2?1:(val)==1?0:3)
#define DIV_FROM_REG(val) (1 << (val))
#define BEEP_MASK_TO_REG(val) ((val) & 0x7f & data->alarm_mask)
#define BEEP_MASK_FROM_REG(val) ((val) & 0x7f)
/* Each client has this additional data */
struct gl518_data {
struct i2c_client client;
struct class_device *class_dev;
enum chips type;
struct semaphore update_lock;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
u8 voltage_in[4]; /* Register values; [0] = VDD */
u8 voltage_min[4]; /* Register values; [0] = VDD */
u8 voltage_max[4]; /* Register values; [0] = VDD */
u8 iter_voltage_in[4]; /* Register values; [0] = VDD */
u8 fan_in[2];
u8 fan_min[2];
u8 fan_div[2]; /* Register encoding, shifted right */
u8 fan_auto1; /* Boolean */
u8 temp_in; /* Register values */
u8 temp_max; /* Register values */
u8 temp_hyst; /* Register values */
u8 alarms; /* Register value */
u8 alarm_mask; /* Register value */
u8 beep_mask; /* Register value */
u8 beep_enable; /* Boolean */
};
static int gl518_attach_adapter(struct i2c_adapter *adapter);
static int gl518_detect(struct i2c_adapter *adapter, int address, int kind);
static void gl518_init_client(struct i2c_client *client);
static int gl518_detach_client(struct i2c_client *client);
static int gl518_read_value(struct i2c_client *client, u8 reg);
static int gl518_write_value(struct i2c_client *client, u8 reg, u16 value);
static struct gl518_data *gl518_update_device(struct device *dev);
/* This is the driver that will be inserted */
static struct i2c_driver gl518_driver = {
.owner = THIS_MODULE,
.name = "gl518sm",
.id = I2C_DRIVERID_GL518,
.flags = I2C_DF_NOTIFY,
.attach_adapter = gl518_attach_adapter,
.detach_client = gl518_detach_client,
};
/*
* Sysfs stuff
*/
#define show(type, suffix, value) \
static ssize_t show_##suffix(struct device *dev, struct device_attribute *attr, char *buf) \
{ \
struct gl518_data *data = gl518_update_device(dev); \
return sprintf(buf, "%d\n", type##_FROM_REG(data->value)); \
}
#define show_fan(suffix, value, index) \
static ssize_t show_##suffix(struct device *dev, struct device_attribute *attr, char *buf) \
{ \
struct gl518_data *data = gl518_update_device(dev); \
return sprintf(buf, "%d\n", FAN_FROM_REG(data->value[index], \
DIV_FROM_REG(data->fan_div[index]))); \
}
show(TEMP, temp_input1, temp_in);
show(TEMP, temp_max1, temp_max);
show(TEMP, temp_hyst1, temp_hyst);
show(BOOL, fan_auto1, fan_auto1);
show_fan(fan_input1, fan_in, 0);
show_fan(fan_input2, fan_in, 1);
show_fan(fan_min1, fan_min, 0);
show_fan(fan_min2, fan_min, 1);
show(DIV, fan_div1, fan_div[0]);
show(DIV, fan_div2, fan_div[1]);
show(VDD, in_input0, voltage_in[0]);
show(IN, in_input1, voltage_in[1]);
show(IN, in_input2, voltage_in[2]);
show(IN, in_input3, voltage_in[3]);
show(VDD, in_min0, voltage_min[0]);
show(IN, in_min1, voltage_min[1]);
show(IN, in_min2, voltage_min[2]);
show(IN, in_min3, voltage_min[3]);
show(VDD, in_max0, voltage_max[0]);
show(IN, in_max1, voltage_max[1]);
show(IN, in_max2, voltage_max[2]);
show(IN, in_max3, voltage_max[3]);
show(RAW, alarms, alarms);
show(BOOL, beep_enable, beep_enable);
show(BEEP_MASK, beep_mask, beep_mask);
#define set(type, suffix, value, reg) \
static ssize_t set_##suffix(struct device *dev, struct device_attribute *attr, const char *buf, \
size_t count) \
{ \
struct i2c_client *client = to_i2c_client(dev); \
struct gl518_data *data = i2c_get_clientdata(client); \
long val = simple_strtol(buf, NULL, 10); \
\
down(&data->update_lock); \
data->value = type##_TO_REG(val); \
gl518_write_value(client, reg, data->value); \
up(&data->update_lock); \
return count; \
}
#define set_bits(type, suffix, value, reg, mask, shift) \
static ssize_t set_##suffix(struct device *dev, struct device_attribute *attr, const char *buf, \
size_t count) \
{ \
struct i2c_client *client = to_i2c_client(dev); \
struct gl518_data *data = i2c_get_clientdata(client); \
int regvalue; \
unsigned long val = simple_strtoul(buf, NULL, 10); \
\
down(&data->update_lock); \
regvalue = gl518_read_value(client, reg); \
data->value = type##_TO_REG(val); \
regvalue = (regvalue & ~mask) | (data->value << shift); \
gl518_write_value(client, reg, regvalue); \
up(&data->update_lock); \
return count; \
}
#define set_low(type, suffix, value, reg) \
set_bits(type, suffix, value, reg, 0x00ff, 0)
#define set_high(type, suffix, value, reg) \
set_bits(type, suffix, value, reg, 0xff00, 8)
set(TEMP, temp_max1, temp_max, GL518_REG_TEMP_MAX);
set(TEMP, temp_hyst1, temp_hyst, GL518_REG_TEMP_HYST);
set_bits(BOOL, fan_auto1, fan_auto1, GL518_REG_MISC, 0x08, 3);
set_bits(DIV, fan_div1, fan_div[0], GL518_REG_MISC, 0xc0, 6);
set_bits(DIV, fan_div2, fan_div[1], GL518_REG_MISC, 0x30, 4);
set_low(VDD, in_min0, voltage_min[0], GL518_REG_VDD_LIMIT);
set_low(IN, in_min1, voltage_min[1], GL518_REG_VIN1_LIMIT);
set_low(IN, in_min2, voltage_min[2], GL518_REG_VIN2_LIMIT);
set_low(IN, in_min3, voltage_min[3], GL518_REG_VIN3_LIMIT);
set_high(VDD, in_max0, voltage_max[0], GL518_REG_VDD_LIMIT);
set_high(IN, in_max1, voltage_max[1], GL518_REG_VIN1_LIMIT);
set_high(IN, in_max2, voltage_max[2], GL518_REG_VIN2_LIMIT);
set_high(IN, in_max3, voltage_max[3], GL518_REG_VIN3_LIMIT);
set_bits(BOOL, beep_enable, beep_enable, GL518_REG_CONF, 0x04, 2);
set(BEEP_MASK, beep_mask, beep_mask, GL518_REG_ALARM);
static ssize_t set_fan_min1(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
struct gl518_data *data = i2c_get_clientdata(client);
int regvalue;
unsigned long val = simple_strtoul(buf, NULL, 10);
down(&data->update_lock);
regvalue = gl518_read_value(client, GL518_REG_FAN_LIMIT);
data->fan_min[0] = FAN_TO_REG(val,
DIV_FROM_REG(data->fan_div[0]));
regvalue = (regvalue & 0x00ff) | (data->fan_min[0] << 8);
gl518_write_value(client, GL518_REG_FAN_LIMIT, regvalue);
data->beep_mask = gl518_read_value(client, GL518_REG_ALARM);
if (data->fan_min[0] == 0)
data->alarm_mask &= ~0x20;
else
data->alarm_mask |= 0x20;
data->beep_mask &= data->alarm_mask;
gl518_write_value(client, GL518_REG_ALARM, data->beep_mask);
up(&data->update_lock);
return count;
}
static ssize_t set_fan_min2(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
struct gl518_data *data = i2c_get_clientdata(client);
int regvalue;
unsigned long val = simple_strtoul(buf, NULL, 10);
down(&data->update_lock);
regvalue = gl518_read_value(client, GL518_REG_FAN_LIMIT);
data->fan_min[1] = FAN_TO_REG(val,
DIV_FROM_REG(data->fan_div[1]));
regvalue = (regvalue & 0xff00) | data->fan_min[1];
gl518_write_value(client, GL518_REG_FAN_LIMIT, regvalue);
data->beep_mask = gl518_read_value(client, GL518_REG_ALARM);
if (data->fan_min[1] == 0)
data->alarm_mask &= ~0x40;
else
data->alarm_mask |= 0x40;
data->beep_mask &= data->alarm_mask;
gl518_write_value(client, GL518_REG_ALARM, data->beep_mask);
up(&data->update_lock);
return count;
}
static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input1, NULL);
static DEVICE_ATTR(temp1_max, S_IWUSR|S_IRUGO, show_temp_max1, set_temp_max1);
static DEVICE_ATTR(temp1_max_hyst, S_IWUSR|S_IRUGO,
show_temp_hyst1, set_temp_hyst1);
static DEVICE_ATTR(fan1_auto, S_IWUSR|S_IRUGO, show_fan_auto1, set_fan_auto1);
static DEVICE_ATTR(fan1_input, S_IRUGO, show_fan_input1, NULL);
static DEVICE_ATTR(fan2_input, S_IRUGO, show_fan_input2, NULL);
static DEVICE_ATTR(fan1_min, S_IWUSR|S_IRUGO, show_fan_min1, set_fan_min1);
static DEVICE_ATTR(fan2_min, S_IWUSR|S_IRUGO, show_fan_min2, set_fan_min2);
static DEVICE_ATTR(fan1_div, S_IWUSR|S_IRUGO, show_fan_div1, set_fan_div1);
static DEVICE_ATTR(fan2_div, S_IWUSR|S_IRUGO, show_fan_div2, set_fan_div2);
static DEVICE_ATTR(in0_input, S_IRUGO, show_in_input0, NULL);
static DEVICE_ATTR(in1_input, S_IRUGO, show_in_input1, NULL);
static DEVICE_ATTR(in2_input, S_IRUGO, show_in_input2, NULL);
static DEVICE_ATTR(in3_input, S_IRUGO, show_in_input3, NULL);
static DEVICE_ATTR(in0_min, S_IWUSR|S_IRUGO, show_in_min0, set_in_min0);
static DEVICE_ATTR(in1_min, S_IWUSR|S_IRUGO, show_in_min1, set_in_min1);
static DEVICE_ATTR(in2_min, S_IWUSR|S_IRUGO, show_in_min2, set_in_min2);
static DEVICE_ATTR(in3_min, S_IWUSR|S_IRUGO, show_in_min3, set_in_min3);
static DEVICE_ATTR(in0_max, S_IWUSR|S_IRUGO, show_in_max0, set_in_max0);
static DEVICE_ATTR(in1_max, S_IWUSR|S_IRUGO, show_in_max1, set_in_max1);
static DEVICE_ATTR(in2_max, S_IWUSR|S_IRUGO, show_in_max2, set_in_max2);
static DEVICE_ATTR(in3_max, S_IWUSR|S_IRUGO, show_in_max3, set_in_max3);
static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
static DEVICE_ATTR(beep_enable, S_IWUSR|S_IRUGO,
show_beep_enable, set_beep_enable);
static DEVICE_ATTR(beep_mask, S_IWUSR|S_IRUGO,
show_beep_mask, set_beep_mask);
/*
* Real code
*/
static int gl518_attach_adapter(struct i2c_adapter *adapter)
{
if (!(adapter->class & I2C_CLASS_HWMON))
return 0;
return i2c_detect(adapter, &addr_data, gl518_detect);
}
static int gl518_detect(struct i2c_adapter *adapter, int address, int kind)
{
int i;
struct i2c_client *new_client;
struct gl518_data *data;
int err = 0;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
I2C_FUNC_SMBUS_WORD_DATA))
goto exit;
/* OK. For now, we presume we have a valid client. We now create the
client structure, even though we cannot fill it completely yet.
But it allows us to access gl518_{read,write}_value. */
if (!(data = kmalloc(sizeof(struct gl518_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
memset(data, 0, sizeof(struct gl518_data));
new_client = &data->client;
i2c_set_clientdata(new_client, data);
new_client->addr = address;
new_client->adapter = adapter;
new_client->driver = &gl518_driver;
new_client->flags = 0;
/* Now, we do the remaining detection. */
if (kind < 0) {
if ((gl518_read_value(new_client, GL518_REG_CHIP_ID) != 0x80)
|| (gl518_read_value(new_client, GL518_REG_CONF) & 0x80))
goto exit_free;
}
/* Determine the chip type. */
if (kind <= 0) {
i = gl518_read_value(new_client, GL518_REG_REVISION);
if (i == 0x00) {
kind = gl518sm_r00;
} else if (i == 0x80) {
kind = gl518sm_r80;
} else {
if (kind <= 0)
dev_info(&adapter->dev,
"Ignoring 'force' parameter for unknown "
"chip at adapter %d, address 0x%02x\n",
i2c_adapter_id(adapter), address);
goto exit_free;
}
}
/* Fill in the remaining client fields */
strlcpy(new_client->name, "gl518sm", I2C_NAME_SIZE);
data->type = kind;
data->valid = 0;
init_MUTEX(&data->update_lock);
/* Tell the I2C layer a new client has arrived */
if ((err = i2c_attach_client(new_client)))
goto exit_free;
/* Initialize the GL518SM chip */
data->alarm_mask = 0xff;
data->voltage_in[0]=data->voltage_in[1]=data->voltage_in[2]=0;
gl518_init_client((struct i2c_client *) new_client);
/* Register sysfs hooks */
data->class_dev = hwmon_device_register(&new_client->dev);
if (IS_ERR(data->class_dev)) {
err = PTR_ERR(data->class_dev);
goto exit_detach;
}
device_create_file(&new_client->dev, &dev_attr_in0_input);
device_create_file(&new_client->dev, &dev_attr_in1_input);
device_create_file(&new_client->dev, &dev_attr_in2_input);
device_create_file(&new_client->dev, &dev_attr_in3_input);
device_create_file(&new_client->dev, &dev_attr_in0_min);
device_create_file(&new_client->dev, &dev_attr_in1_min);
device_create_file(&new_client->dev, &dev_attr_in2_min);
device_create_file(&new_client->dev, &dev_attr_in3_min);
device_create_file(&new_client->dev, &dev_attr_in0_max);
device_create_file(&new_client->dev, &dev_attr_in1_max);
device_create_file(&new_client->dev, &dev_attr_in2_max);
device_create_file(&new_client->dev, &dev_attr_in3_max);
device_create_file(&new_client->dev, &dev_attr_fan1_auto);
device_create_file(&new_client->dev, &dev_attr_fan1_input);
device_create_file(&new_client->dev, &dev_attr_fan2_input);
device_create_file(&new_client->dev, &dev_attr_fan1_min);
device_create_file(&new_client->dev, &dev_attr_fan2_min);
device_create_file(&new_client->dev, &dev_attr_fan1_div);
device_create_file(&new_client->dev, &dev_attr_fan2_div);
device_create_file(&new_client->dev, &dev_attr_temp1_input);
device_create_file(&new_client->dev, &dev_attr_temp1_max);
device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst);
device_create_file(&new_client->dev, &dev_attr_alarms);
device_create_file(&new_client->dev, &dev_attr_beep_enable);
device_create_file(&new_client->dev, &dev_attr_beep_mask);
return 0;
/* OK, this is not exactly good programming practice, usually. But it is
very code-efficient in this case. */
exit_detach:
i2c_detach_client(new_client);
exit_free:
kfree(data);
exit:
return err;
}
/* Called when we have found a new GL518SM.
Note that we preserve D4:NoFan2 and D2:beep_enable. */
static void gl518_init_client(struct i2c_client *client)
{
/* Make sure we leave D7:Reset untouched */
u8 regvalue = gl518_read_value(client, GL518_REG_CONF) & 0x7f;
/* Comparator mode (D3=0), standby mode (D6=0) */
gl518_write_value(client, GL518_REG_CONF, (regvalue &= 0x37));
/* Never interrupts */
gl518_write_value(client, GL518_REG_MASK, 0x00);
/* Clear status register (D5=1), start (D6=1) */
gl518_write_value(client, GL518_REG_CONF, 0x20 | regvalue);
gl518_write_value(client, GL518_REG_CONF, 0x40 | regvalue);
}
static int gl518_detach_client(struct i2c_client *client)
{
struct gl518_data *data = i2c_get_clientdata(client);
int err;
hwmon_device_unregister(data->class_dev);
if ((err = i2c_detach_client(client))) {
dev_err(&client->dev, "Client deregistration failed, "
"client not detached.\n");
return err;
}
kfree(data);
return 0;
}
/* Registers 0x07 to 0x0c are word-sized, others are byte-sized
GL518 uses a high-byte first convention, which is exactly opposite to
the usual practice. */
static int gl518_read_value(struct i2c_client *client, u8 reg)
{
if ((reg >= 0x07) && (reg <= 0x0c))
return swab16(i2c_smbus_read_word_data(client, reg));
else
return i2c_smbus_read_byte_data(client, reg);
}
/* Registers 0x07 to 0x0c are word-sized, others are byte-sized
GL518 uses a high-byte first convention, which is exactly opposite to
the usual practice. */
static int gl518_write_value(struct i2c_client *client, u8 reg, u16 value)
{
if ((reg >= 0x07) && (reg <= 0x0c))
return i2c_smbus_write_word_data(client, reg, swab16(value));
else
return i2c_smbus_write_byte_data(client, reg, value);
}
static struct gl518_data *gl518_update_device(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct gl518_data *data = i2c_get_clientdata(client);
int val;
down(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
|| !data->valid) {
dev_dbg(&client->dev, "Starting gl518 update\n");
data->alarms = gl518_read_value(client, GL518_REG_INT);
data->beep_mask = gl518_read_value(client, GL518_REG_ALARM);
val = gl518_read_value(client, GL518_REG_VDD_LIMIT);
data->voltage_min[0] = val & 0xff;
data->voltage_max[0] = (val >> 8) & 0xff;
val = gl518_read_value(client, GL518_REG_VIN1_LIMIT);
data->voltage_min[1] = val & 0xff;
data->voltage_max[1] = (val >> 8) & 0xff;
val = gl518_read_value(client, GL518_REG_VIN2_LIMIT);
data->voltage_min[2] = val & 0xff;
data->voltage_max[2] = (val >> 8) & 0xff;
val = gl518_read_value(client, GL518_REG_VIN3_LIMIT);
data->voltage_min[3] = val & 0xff;
data->voltage_max[3] = (val >> 8) & 0xff;
val = gl518_read_value(client, GL518_REG_FAN_COUNT);
data->fan_in[0] = (val >> 8) & 0xff;
data->fan_in[1] = val & 0xff;
val = gl518_read_value(client, GL518_REG_FAN_LIMIT);
data->fan_min[0] = (val >> 8) & 0xff;
data->fan_min[1] = val & 0xff;
data->temp_in = gl518_read_value(client, GL518_REG_TEMP_IN);
data->temp_max =
gl518_read_value(client, GL518_REG_TEMP_MAX);
data->temp_hyst =
gl518_read_value(client, GL518_REG_TEMP_HYST);
val = gl518_read_value(client, GL518_REG_MISC);
data->fan_div[0] = (val >> 6) & 0x03;
data->fan_div[1] = (val >> 4) & 0x03;
data->fan_auto1 = (val >> 3) & 0x01;
data->alarms &= data->alarm_mask;
val = gl518_read_value(client, GL518_REG_CONF);
data->beep_enable = (val >> 2) & 1;
if (data->type != gl518sm_r00) {
data->voltage_in[0] =
gl518_read_value(client, GL518_REG_VDD);
data->voltage_in[1] =
gl518_read_value(client, GL518_REG_VIN1);
data->voltage_in[2] =
gl518_read_value(client, GL518_REG_VIN2);
}
data->voltage_in[3] =
gl518_read_value(client, GL518_REG_VIN3);
data->last_updated = jiffies;
data->valid = 1;
}
up(&data->update_lock);
return data;
}
static int __init sensors_gl518sm_init(void)
{
return i2c_add_driver(&gl518_driver);
}
static void __exit sensors_gl518sm_exit(void)
{
i2c_del_driver(&gl518_driver);
}
MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
"Kyosti Malkki <kmalkki@cc.hut.fi> and "
"Hong-Gunn Chew <hglinux@gunnet.org>");
MODULE_DESCRIPTION("GL518SM driver");
MODULE_LICENSE("GPL");
module_init(sensors_gl518sm_init);
module_exit(sensors_gl518sm_exit);
