/*
* (C) 2001-2004 Dave Jones. <davej@redhat.com>
* (C) 2002 Padraig Brady. <padraig@antefacto.com>
*
* Licensed under the terms of the GNU GPL License version 2.
* Based upon datasheets & sample CPUs kindly provided by VIA.
*
* VIA have currently 3 different versions of Longhaul.
* Version 1 (Longhaul) uses the BCR2 MSR at 0x1147.
* It is present only in Samuel 1 (C5A), Samuel 2 (C5B) stepping 0.
* Version 2 of longhaul is backward compatible with v1, but adds
* LONGHAUL MSR for purpose of both frequency and voltage scaling.
* Present in Samuel 2 (steppings 1-7 only) (C5B), and Ezra (C5C).
* Version 3 of longhaul got renamed to Powersaver and redesigned
* to use only the POWERSAVER MSR at 0x110a.
* It is present in Ezra-T (C5M), Nehemiah (C5X) and above.
* It's pretty much the same feature wise to longhaul v2, though
* there is provision for scaling FSB too, but this doesn't work
* too well in practice so we don't even try to use this.
*
* BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/cpufreq.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/delay.h>
#include <linux/timex.h>
#include <linux/io.h>
#include <linux/acpi.h>
#include <asm/msr.h>
#include <asm/cpu_device_id.h>
#include <acpi/processor.h>
#include "longhaul.h"
#define PFX "longhaul: "
#define TYPE_LONGHAUL_V1 1
#define TYPE_LONGHAUL_V2 2
#define TYPE_POWERSAVER 3
#define CPU_SAMUEL 1
#define CPU_SAMUEL2 2
#define CPU_EZRA 3
#define CPU_EZRA_T 4
#define CPU_NEHEMIAH 5
#define CPU_NEHEMIAH_C 6
/* Flags */
#define USE_ACPI_C3 (1 << 1)
#define USE_NORTHBRIDGE (1 << 2)
static int cpu_model;
static unsigned int numscales = 16;
static unsigned int fsb;
static const struct mV_pos *vrm_mV_table;
static const unsigned char *mV_vrm_table;
static unsigned int highest_speed, lowest_speed; /* kHz */
static unsigned int minmult, maxmult;
static int can_scale_voltage;
static struct acpi_processor *pr;
static struct acpi_processor_cx *cx;
static u32 acpi_regs_addr;
static u8 longhaul_flags;
static unsigned int longhaul_index;
/* Module parameters */
static int scale_voltage;
static int disable_acpi_c3;
static int revid_errata;
static int enable;
/* Clock ratios multiplied by 10 */
static int mults[32];
static int eblcr[32];
static int longhaul_version;
static struct cpufreq_frequency_table *longhaul_table;
static char speedbuffer[8];
static char *print_speed(int speed)
{
if (speed < 1000) {
snprintf(speedbuffer, sizeof(speedbuffer), "%dMHz", speed);
return speedbuffer;
}
if (speed%1000 == 0)
snprintf(speedbuffer, sizeof(speedbuffer),
"%dGHz", speed/1000);
else
snprintf(speedbuffer, sizeof(speedbuffer),
"%d.%dGHz", speed/1000, (speed%1000)/100);
return speedbuffer;
}
static unsigned int calc_speed(int mult)
{
int khz;
khz = (mult/10)*fsb;
if (mult%10)
khz += fsb/2;
khz *= 1000;
return khz;
}
static int longhaul_get_cpu_mult(void)
{
unsigned long invalue = 0, lo, hi;
rdmsr(MSR_IA32_EBL_CR_POWERON, lo, hi);
invalue = (lo & (1<<22|1<<23|1<<24|1<<25))>>22;
if (longhaul_version == TYPE_LONGHAUL_V2 ||
longhaul_version == TYPE_POWERSAVER) {
if (lo & (1<<27))
invalue += 16;
}
return eblcr[invalue];
}
/* For processor with BCR2 MSR */
static void do_longhaul1(unsigned int mults_index)
{
union msr_bcr2 bcr2;
rdmsrl(MSR_VIA_BCR2, bcr2.val);
/* Enable software clock multiplier */
bcr2.bits.ESOFTBF = 1;
bcr2.bits.CLOCKMUL = mults_index & 0xff;
/* Sync to timer tick */
safe_halt();
/* Change frequency on next halt or sleep */
wrmsrl(MSR_VIA_BCR2, bcr2.val);
/* Invoke transition */
ACPI_FLUSH_CPU_CACHE();
halt();
/* Disable software clock multiplier */
local_irq_disable();
rdmsrl(MSR_VIA_BCR2, bcr2.val);
bcr2.bits.ESOFTBF = 0;
wrmsrl(MSR_VIA_BCR2, bcr2.val);
}
/* For processor with Longhaul MSR */
static void do_powersaver(int cx_address, unsigned int mults_index,
unsigned int dir)
{
union msr_longhaul longhaul;
u32 t;
rdmsrl(MSR_VIA_LONGHAUL, longhaul.val);
/* Setup new frequency */
if (!revid_errata)
longhaul.bits.RevisionKey = longhaul.bits.RevisionID;
else
longhaul.bits.RevisionKey = 0;
longhaul.bits.SoftBusRatio = mults_index & 0xf;
longhaul.bits.SoftBusRatio4 = (mults_index & 0x10) >> 4;
/* Setup new voltage */
if (can_scale_voltage)
longhaul.bits.SoftVID = (mults_index >> 8) & 0x1f;
/* Sync to timer tick */
safe_halt();
/* Raise voltage if necessary */
if (can_scale_voltage && dir) {
longhaul.bits.EnableSoftVID = 1;
wrmsrl(MSR_VIA_LONGHAUL, longhaul.val);
/* Change voltage */
if (!cx_address) {
ACPI_FLUSH_CPU_CACHE();
halt();
} else {
ACPI_FLUSH_CPU_CACHE();
/* Invoke C3 */
inb(cx_address);
/* Dummy op - must do something useless after P_LVL3
* read */
t = inl(acpi_gbl_FADT.xpm_timer_block.address);
}
longhaul.bits.EnableSoftVID = 0;
wrmsrl(MSR_VIA_LONGHAUL, longhaul.val);
}
/* Change frequency on next halt or sleep */
longhaul.bits.EnableSoftBusRatio = 1;
wrmsrl(MSR_VIA_LONGHAUL, longhaul.val);
if (!cx_address) {
ACPI_FLUSH_CPU_CACHE();
halt();
} else {
ACPI_FLUSH_CPU_CACHE();
/* Invoke C3 */
inb(cx_address);
/* Dummy op - must do something useless after P_LVL3 read */
t = inl(acpi_gbl_FADT.xpm_timer_block.address);
}
/* Disable bus ratio bit */
longhaul.bits.EnableSoftBusRatio = 0;
wrmsrl(MSR_VIA_LONGHAUL, longhaul.val);
/* Reduce voltage if necessary */
if (can_scale_voltage && !dir) {
longhaul.bits.EnableSoftVID = 1;
wrmsrl(MSR_VIA_LONGHAUL, longhaul.val);
/* Change voltage */
if (!cx_address) {
ACPI_FLUSH_CPU_CACHE();
halt();
} else {
ACPI_FLUSH_CPU_CACHE();
/* Invoke C3 */
inb(cx_address);
/* Dummy op - must do something useless after P_LVL3
* read */
t = inl(acpi_gbl_FADT.xpm_timer_block.address);
}
longhaul.bits.EnableSoftVID = 0;
wrmsrl(MSR_VIA_LONGHAUL, longhaul.val);
}
}
/**
* longhaul_set_cpu_frequency()
* @mults_index : bitpattern of the new multiplier.
*
* Sets a new clock ratio.
*/
static void longhaul_setstate(struct cpufreq_policy *policy,
unsigned int table_index)
{
unsigned int mults_index;
int speed, mult;
struct cpufreq_freqs freqs;
unsigned long flags;
unsigned int pic1_mask, pic2_mask;
u16 bm_status = 0;
u32 bm_timeout = 1000;
unsigned int dir = 0;
mults_index = longhaul_table[table_index].index;
/* Safety precautions */
mult = mults[mults_index & 0x1f];
if (mult == -1)
return;
speed = calc_speed(mult);
if ((speed > highest_speed) || (speed < lowest_speed))
return;
/* Voltage transition before frequency transition? */
if (can_scale_voltage && longhaul_index < table_index)
dir = 1;
freqs.old = calc_speed(longhaul_get_cpu_mult());
freqs.new = speed;
cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
pr_debug("Setting to FSB:%dMHz Mult:%d.%dx (%s)\n",
fsb, mult/10, mult%10, print_speed(speed/1000));
retry_loop:
preempt_disable();
local_irq_save(flags);
pic2_mask = inb(0xA1);
pic1_mask = inb(0x21); /* works on C3. save mask. */
outb(0xFF, 0xA1); /* Overkill */
outb(0xFE, 0x21); /* TMR0 only */
/* Wait while PCI bus is busy. */
if (acpi_regs_addr && (longhaul_flags & USE_NORTHBRIDGE
|| ((pr != NULL) && pr->flags.bm_control))) {
bm_status = inw(acpi_regs_addr);
bm_status &= 1 << 4;
while (bm_status && bm_timeout) {
outw(1 << 4, acpi_regs_addr);
bm_timeout--;
bm_status = inw(acpi_regs_addr);
bm_status &= 1 << 4;
}
}
if (longhaul_flags & USE_NORTHBRIDGE) {
/* Disable AGP and PCI arbiters */
outb(3, 0x22);
} else if ((pr != NULL) && pr->flags.bm_control) {
/* Disable bus master arbitration */
acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 1);
}
switch (longhaul_version) {
/*
* Longhaul v1. (Samuel[C5A] and Samuel2 stepping 0[C5B])
* Software controlled multipliers only.
*/
case TYPE_LONGHAUL_V1:
do_longhaul1(mults_index);
break;
/*
* Longhaul v2 appears in Samuel2 Steppings 1->7 [C5B] and Ezra [C5C]
*
* Longhaul v3 (aka Powersaver). (Ezra-T [C5M] & Nehemiah [C5N])
* Nehemiah can do FSB scaling too, but this has never been proven
* to work in practice.
*/
case TYPE_LONGHAUL_V2:
case TYPE_POWERSAVER:
if (longhaul_flags & USE_ACPI_C3) {
/* Don't allow wakeup */
acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_RLD, 0);
do_powersaver(cx->address, mults_index, dir);
} else {
do_powersaver(0, mults_index, dir);
}
break;
}
if (longhaul_flags & USE_NORTHBRIDGE) {
/* Enable arbiters */
outb(0, 0x22);
} else if ((pr != NULL) && pr->flags.bm_control) {
/* Enable bus master arbitration */
acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 0);
}
outb(pic2_mask, 0xA1); /* restore mask */
outb(pic1_mask, 0x21);
local_irq_restore(flags);
preempt_enable();
freqs.new = calc_speed(longhaul_get_cpu_mult());
/* Check if requested frequency is set. */
if (unlikely(freqs.new != speed)) {
printk(KERN_INFO PFX "Failed to set requested frequency!\n");
/* Revision ID = 1 but processor is expecting revision key
* equal to 0. Jumpers at the bottom of processor will change
* multiplier and FSB, but will not change bits in Longhaul
* MSR nor enable voltage scaling. */
if (!revid_errata) {
printk(KERN_INFO PFX "Enabling \"Ignore Revision ID\" "
"option.\n");
revid_errata = 1;
msleep(200);
goto retry_loop;
}
/* Why ACPI C3 sometimes doesn't work is a mystery for me.
* But it does happen. Processor is entering ACPI C3 state,
* but it doesn't change frequency. I tried poking various
* bits in northbridge registers, but without success. */
if (longhaul_flags & USE_ACPI_C3) {
printk(KERN_INFO PFX "Disabling ACPI C3 support.\n");
longhaul_flags &= ~USE_ACPI_C3;
if (revid_errata) {
printk(KERN_INFO PFX "Disabling \"Ignore "
"Revision ID\" option.\n");
revid_errata = 0;
}
msleep(200);
goto retry_loop;
}
/* This shouldn't happen. Longhaul ver. 2 was reported not
* working on processors without voltage scaling, but with
* RevID = 1. RevID errata will make things right. Just
* to be 100% sure. */
if (longhaul_version == TYPE_LONGHAUL_V2) {
printk(KERN_INFO PFX "Switching to Longhaul ver. 1\n");
longhaul_version = TYPE_LONGHAUL_V1;
msleep(200);
goto retry_loop;
}
}
/* Report true CPU frequency */
cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
if (!bm_timeout)
printk(KERN_INFO PFX "Warning: Timeout while waiting for "
"idle PCI bus.\n");
}
/*
* Centaur decided to make life a little more tricky.
* Only longhaul v1 is allowed to read EBLCR BSEL[0:1].
* Samuel2 and above have to try and guess what the FSB is.
* We do this by assuming we booted at maximum multiplier, and interpolate
* between that value multiplied by possible FSBs and cpu_mhz which
* was calculated at boot time. Really ugly, but no other way to do this.
*/
#define ROUNDING 0xf
static int guess_fsb(int mult)
{
int speed = cpu_khz / 1000;
int i;
int speeds[] = { 666, 1000, 1333, 2000 };
int f_max, f_min;
for (i = 0; i < 4; i++) {
f_max = ((speeds[i] * mult) + 50) / 100;
f_max += (ROUNDING / 2);
f_min = f_max - ROUNDING;
if ((speed <= f_max) && (speed >= f_min))
return speeds[i] / 10;
}
return 0;
}
static int __cpuinit longhaul_get_ranges(void)
{
unsigned int i, j, k = 0;
unsigned int ratio;
int mult;
/* Get current frequency */
mult = longhaul_get_cpu_mult();
if (mult == -1) {
printk(KERN_INFO PFX "Invalid (reserved) multiplier!\n");
return -EINVAL;
}
fsb = guess_fsb(mult);
if (fsb == 0) {
printk(KERN_INFO PFX "Invalid (reserved) FSB!\n");
return -EINVAL;
}
/* Get max multiplier - as we always did.
* Longhaul MSR is useful only when voltage scaling is enabled.
* C3 is booting at max anyway. */
maxmult = mult;
/* Get min multiplier */
switch (cpu_model) {
case CPU_NEHEMIAH:
minmult = 50;
break;
case CPU_NEHEMIAH_C:
minmult = 40;
break;
default:
minmult = 30;
break;
}
pr_debug("MinMult:%d.%dx MaxMult:%d.%dx\n",
minmult/10, minmult%10, maxmult/10, maxmult%10);
highest_speed = calc_speed(maxmult);
lowest_speed = calc_speed(minmult);
pr_debug("FSB:%dMHz Lowest speed: %s Highest speed:%s\n", fsb,
print_speed(lowest_speed/1000),
print_speed(highest_speed/1000));
if (lowest_speed == highest_speed) {
printk(KERN_INFO PFX "highestspeed == lowest, aborting.\n");
return -EINVAL;
}
if (lowest_speed > highest_speed) {
printk(KERN_INFO PFX "nonsense! lowest (%d > %d) !\n",
lowest_speed, highest_speed);
return -EINVAL;
}
longhaul_table = kmalloc((numscales + 1) * sizeof(*longhaul_table),
GFP_KERNEL);
if (!longhaul_table)
return -ENOMEM;
for (j = 0; j < numscales; j++) {
ratio = mults[j];
if (ratio == -1)
continue;
if (ratio > maxmult || ratio < minmult)
continue;
longhaul_table[k].frequency = calc_speed(ratio);
longhaul_table[k].index = j;
k++;
}
if (k <= 1) {
kfree(longhaul_table);
return -ENODEV;
}
/* Sort */
for (j = 0; j < k - 1; j++) {
unsigned int min_f, min_i;
min_f = longhaul_table[j].frequency;
min_i = j;
for (i = j + 1; i < k; i++) {
if (longhaul_table[i].frequency < min_f) {
min_f = longhaul_table[i].frequency;
min_i = i;
}
}
if (min_i != j) {
swap(longhaul_table[j].frequency,
longhaul_table[min_i].frequency);
swap(longhaul_table[j].index,
longhaul_table[min_i].index);
}
}
longhaul_table[k].frequency = CPUFREQ_TABLE_END;
/* Find index we are running on */
for (j = 0; j < k; j++) {
if (mults[longhaul_table[j].index & 0x1f] == mult) {
longhaul_index = j;
break;
}
}
return 0;
}
static void __cpuinit longhaul_setup_voltagescaling(void)
{
union msr_longhaul longhaul;
struct mV_pos minvid, maxvid, vid;
unsigned int j, speed, pos, kHz_step, numvscales;
int min_vid_speed;
rdmsrl(MSR_VIA_LONGHAUL, longhaul.val);
if (!(longhaul.bits.RevisionID & 1)) {
printk(KERN_INFO PFX "Voltage scaling not supported by CPU.\n");
return;
}
if (!longhaul.bits.VRMRev) {
printk(KERN_INFO PFX "VRM 8.5\n");
vrm_mV_table = &vrm85_mV[0];
mV_vrm_table = &mV_vrm85[0];
} else {
printk(KERN_INFO PFX "Mobile VRM\n");
if (cpu_model < CPU_NEHEMIAH)
return;
vrm_mV_table = &mobilevrm_mV[0];
mV_vrm_table = &mV_mobilevrm[0];
}
minvid = vrm_mV_table[longhaul.bits.MinimumVID];
maxvid = vrm_mV_table[longhaul.bits.MaximumVID];
if (minvid.mV == 0 || maxvid.mV == 0 || minvid.mV > maxvid.mV) {
printk(KERN_INFO PFX "Bogus values Min:%d.%03d Max:%d.%03d. "
"Voltage scaling disabled.\n",
minvid.mV/1000, minvid.mV%1000,
maxvid.mV/1000, maxvid.mV%1000);
return;
}
if (minvid.mV == maxvid.mV) {
printk(KERN_INFO PFX "Claims to support voltage scaling but "
"min & max are both %d.%03d. "
"Voltage scaling disabled\n",
maxvid.mV/1000, maxvid.mV%1000);
return;
}
/* How many voltage steps*/
numvscales = maxvid.pos - minvid.pos + 1;
printk(KERN_INFO PFX
"Max VID=%d.%03d "
"Min VID=%d.%03d, "
"%d possible voltage scales\n",
maxvid.mV/1000, maxvid.mV%1000,
minvid.mV/1000, minvid.mV%1000,
numvscales);
/* Calculate max frequency at min voltage */
j = longhaul.bits.MinMHzBR;
if (longhaul.bits.MinMHzBR4)
j += 16;
min_vid_speed = eblcr[j];
if (min_vid_speed == -1)
return;
switch (longhaul.bits.MinMHzFSB) {
case 0:
min_vid_speed *= 13333;
break;
case 1:
min_vid_speed *= 10000;
break;
case 3:
min_vid_speed *= 6666;
break;
default:
return;
break;
}
if (min_vid_speed >= highest_speed)
return;
/* Calculate kHz for one voltage step */
kHz_step = (highest_speed - min_vid_speed) / numvscales;
j = 0;
while (longhaul_table[j].frequency != CPUFREQ_TABLE_END) {
speed = longhaul_table[j].frequency;
if (speed > min_vid_speed)
pos = (speed - min_vid_speed) / kHz_step + minvid.pos;
else
pos = minvid.pos;
longhaul_table[j].index |= mV_vrm_table[pos] << 8;
vid = vrm_mV_table[mV_vrm_table[pos]];
printk(KERN_INFO PFX "f: %d kHz, index: %d, vid: %d mV\n",
speed, j, vid.mV);
j++;
}
can_scale_voltage = 1;
printk(KERN_INFO PFX "Voltage scaling enabled.\n");
}
static int longhaul_verify(struct cpufreq_policy *policy)
{
return cpufreq_frequency_table_verify(policy, longhaul_table);
}
static int longhaul_target(struct cpufreq_policy *policy,
unsigned int target_freq, unsigned int relation)
{
unsigned int table_index = 0;
unsigned int i;
unsigned int dir = 0;
u8 vid, current_vid;
if (cpufreq_frequency_table_target(policy, longhaul_table, target_freq,
relation, &table_index))
return -EINVAL;
/* Don't set same frequency again */
if (longhaul_index == table_index)
return 0;
if (!can_scale_voltage)
longhaul_setstate(policy, table_index);
else {
/* On test system voltage transitions exceeding single
* step up or down were turning motherboard off. Both
* "ondemand" and "userspace" are unsafe. C7 is doing
* this in hardware, C3 is old and we need to do this
* in software. */
i = longhaul_index;
current_vid = (longhaul_table[longhaul_index].index >> 8);
current_vid &= 0x1f;
if (table_index > longhaul_index)
dir = 1;
while (i != table_index) {
vid = (longhaul_table[i].index >> 8) & 0x1f;
if (vid != current_vid) {
longhaul_setstate(policy, i);
current_vid = vid;
msleep(200);
}
if (dir)
i++;
else
i--;
}
longhaul_setstate(policy, table_index);
}
longhaul_index = table_index;
return 0;
}
static unsigned int longhaul_get(unsigned int cpu)
{
if (cpu)
return 0;
return calc_speed(longhaul_get_cpu_mult());
}
static acpi_status longhaul_walk_callback(acpi_handle obj_handle,
u32 nesting_level,
void *context, void **return_value)
{
struct acpi_device *d;
if (acpi_bus_get_device(obj_handle, &d))
return 0;
*return_value = acpi_driver_data(d);
return 1;
}
/* VIA don't support PM2 reg, but have something similar */
static int enable_arbiter_disable(void)
{
struct pci_dev *dev;
int status = 1;
int reg;
u8 pci_cmd;
/* Find PLE133 host bridge */
reg = 0x78;
dev = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8601_0,
NULL);
/* Find PM133/VT8605 host bridge */
if (dev == NULL)
dev = pci_get_device(PCI_VENDOR_ID_VIA,
PCI_DEVICE_ID_VIA_8605_0, NULL);
/* Find CLE266 host bridge */
if (dev == NULL) {
reg = 0x76;
dev = pci_get_device(PCI_VENDOR_ID_VIA,
PCI_DEVICE_ID_VIA_862X_0, NULL);
/* Find CN400 V-Link host bridge */
if (dev == NULL)
dev = pci_get_device(PCI_VENDOR_ID_VIA, 0x7259, NULL);
}
if (dev != NULL) {
/* Enable access to port 0x22 */
pci_read_config_byte(dev, reg, &pci_cmd);
if (!(pci_cmd & 1<<7)) {
pci_cmd |= 1<<7;
pci_write_config_byte(dev, reg, pci_cmd);
pci_read_config_byte(dev, reg, &pci_cmd);
if (!(pci_cmd & 1<<7)) {
printk(KERN_ERR PFX
"Can't enable access to port 0x22.\n");
status = 0;
}
}
pci_dev_put(dev);
return status;
}
return 0;
}
static int longhaul_setup_southbridge(void)
{
struct pci_dev *dev;
u8 pci_cmd;
/* Find VT8235 southbridge */
dev = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, NULL);
if (dev == NULL)
/* Find VT8237 southbridge */
dev = pci_get_device(PCI_VENDOR_ID_VIA,
PCI_DEVICE_ID_VIA_8237, NULL);
if (dev != NULL) {
/* Set transition time to max */
pci_read_config_byte(dev, 0xec, &pci_cmd);
pci_cmd &= ~(1 << 2);
pci_write_config_byte(dev, 0xec, pci_cmd);
pci_read_config_byte(dev, 0xe4, &pci_cmd);
pci_cmd &= ~(1 << 7);
pci_write_config_byte(dev, 0xe4, pci_cmd);
pci_read_config_byte(dev, 0xe5, &pci_cmd);
pci_cmd |= 1 << 7;
pci_write_config_byte(dev, 0xe5, pci_cmd);
/* Get address of ACPI registers block*/
pci_read_config_byte(dev, 0x81, &pci_cmd);
if (pci_cmd & 1 << 7) {
pci_read_config_dword(dev, 0x88, &acpi_regs_addr);
acpi_regs_addr &= 0xff00;
printk(KERN_INFO PFX "ACPI I/O at 0x%x\n",
acpi_regs_addr);
}
pci_dev_put(dev);
return 1;
}
return 0;
}
static int __cpuinit longhaul_cpu_init(struct cpufreq_policy *policy)
{
struct cpuinfo_x86 *c = &cpu_data(0);
char *cpuname = NULL;
int ret;
u32 lo, hi;
/* Check what we have on this motherboard */
switch (c->x86_model) {
case 6:
cpu_model = CPU_SAMUEL;
cpuname = "C3 'Samuel' [C5A]";
longhaul_version = TYPE_LONGHAUL_V1;
memcpy(mults, samuel1_mults, sizeof(samuel1_mults));
memcpy(eblcr, samuel1_eblcr, sizeof(samuel1_eblcr));
break;
case 7:
switch (c->x86_mask) {
case 0:
longhaul_version = TYPE_LONGHAUL_V1;
cpu_model = CPU_SAMUEL2;
cpuname = "C3 'Samuel 2' [C5B]";
/* Note, this is not a typo, early Samuel2's had
* Samuel1 ratios. */
memcpy(mults, samuel1_mults, sizeof(samuel1_mults));
memcpy(eblcr, samuel2_eblcr, sizeof(samuel2_eblcr));
break;
case 1 ... 15:
longhaul_version = TYPE_LONGHAUL_V2;
if (c->x86_mask < 8) {
cpu_model = CPU_SAMUEL2;
cpuname = "C3 'Samuel 2' [C5B]";
} else {
cpu_model = CPU_EZRA;
cpuname = "C3 'Ezra' [C5C]";
}
memcpy(mults, ezra_mults, sizeof(ezra_mults));
memcpy(eblcr, ezra_eblcr, sizeof(ezra_eblcr));
break;
}
break;
case 8:
cpu_model = CPU_EZRA_T;
cpuname = "C3 'Ezra-T' [C5M]";
longhaul_version = TYPE_POWERSAVER;
numscales = 32;
memcpy(mults, ezrat_mults, sizeof(ezrat_mults));
memcpy(eblcr, ezrat_eblcr, sizeof(ezrat_eblcr));
break;
case 9:
longhaul_version = TYPE_POWERSAVER;
numscales = 32;
memcpy(mults, nehemiah_mults, sizeof(nehemiah_mults));
memcpy(eblcr, nehemiah_eblcr, sizeof(nehemiah_eblcr));
switch (c->x86_mask) {
case 0 ... 1:
cpu_model = CPU_NEHEMIAH;
cpuname = "C3 'Nehemiah A' [C5XLOE]";
break;
case 2 ... 4:
cpu_model = CPU_NEHEMIAH;
cpuname = "C3 'Nehemiah B' [C5XLOH]";
break;
case 5 ... 15:
cpu_model = CPU_NEHEMIAH_C;
cpuname = "C3 'Nehemiah C' [C5P]";
break;
}
break;
default:
cpuname = "Unknown";
break;
}
/* Check Longhaul ver. 2 */
if (longhaul_version == TYPE_LONGHAUL_V2) {
rdmsr(MSR_VIA_LONGHAUL, lo, hi);
if (lo == 0 && hi == 0)
/* Looks like MSR isn't present */
longhaul_version = TYPE_LONGHAUL_V1;
}
printk(KERN_INFO PFX "VIA %s CPU detected. ", cpuname);
switch (longhaul_version) {
case TYPE_LONGHAUL_V1:
case TYPE_LONGHAUL_V2:
printk(KERN_CONT "Longhaul v%d supported.\n", longhaul_version);
break;
case TYPE_POWERSAVER:
printk(KERN_CONT "Powersaver supported.\n");
break;
};
/* Doesn't hurt */
longhaul_setup_southbridge();
/* Find ACPI data for processor */
acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT,
ACPI_UINT32_MAX, &longhaul_walk_callback, NULL,
NULL, (void *)&pr);
/* Check ACPI support for C3 state */
if (pr != NULL && longhaul_version == TYPE_POWERSAVER) {
cx = &pr->power.states[ACPI_STATE_C3];
if (cx->address > 0 && cx->latency <= 1000)
longhaul_flags |= USE_ACPI_C3;
}
/* Disable if it isn't working */
if (disable_acpi_c3)
longhaul_flags &= ~USE_ACPI_C3;
/* Check if northbridge is friendly */
if (enable_arbiter_disable())
longhaul_flags |= USE_NORTHBRIDGE;
/* Check ACPI support for bus master arbiter disable */
if (!(longhaul_flags & USE_ACPI_C3
|| longhaul_flags & USE_NORTHBRIDGE)
&& ((pr == NULL) || !(pr->flags.bm_control))) {
printk(KERN_ERR PFX
"No ACPI support. Unsupported northbridge.\n");
return -ENODEV;
}
if (longhaul_flags & USE_NORTHBRIDGE)
printk(KERN_INFO PFX "Using northbridge support.\n");
if (longhaul_flags & USE_ACPI_C3)
printk(KERN_INFO PFX "Using ACPI support.\n");
ret = longhaul_get_ranges();
if (ret != 0)
return ret;
if ((longhaul_version != TYPE_LONGHAUL_V1) && (scale_voltage != 0))
longhaul_setup_voltagescaling();
policy->cpuinfo.transition_latency = 200000; /* nsec */
policy->cur = calc_speed(longhaul_get_cpu_mult());
ret = cpufreq_frequency_table_cpuinfo(policy, longhaul_table);
if (ret)
return ret;
cpufreq_frequency_table_get_attr(longhaul_table, policy->cpu);
return 0;
}
static int longhaul_cpu_exit(struct cpufreq_policy *policy)
{
cpufreq_frequency_table_put_attr(policy->cpu);
return 0;
}
static struct freq_attr *longhaul_attr[] = {
&cpufreq_freq_attr_scaling_available_freqs,
NULL,
};
static struct cpufreq_driver longhaul_driver = {
.verify = longhaul_verify,
.target = longhaul_target,
.get = longhaul_get,
.init = longhaul_cpu_init,
.exit = longhaul_cpu_exit,
.name = "longhaul",
.owner = THIS_MODULE,
.attr = longhaul_attr,
};
static const struct x86_cpu_id longhaul_id[] = {
{ X86_VENDOR_CENTAUR, 6 },
{}
};
MODULE_DEVICE_TABLE(x86cpu, longhaul_id);
static int __init longhaul_init(void)
{
struct cpuinfo_x86 *c = &cpu_data(0);
if (!x86_match_cpu(longhaul_id))
return -ENODEV;
if (!enable) {
printk(KERN_ERR PFX "Option \"enable\" not set. Aborting.\n");
return -ENODEV;
}
#ifdef CONFIG_SMP
if (num_online_cpus() > 1) {
printk(KERN_ERR PFX "More than 1 CPU detected, "
"longhaul disabled.\n");
return -ENODEV;
}
#endif
#ifdef CONFIG_X86_IO_APIC
if (cpu_has_apic) {
printk(KERN_ERR PFX "APIC detected. Longhaul is currently "
"broken in this configuration.\n");
return -ENODEV;
}
#endif
switch (c->x86_model) {
case 6 ... 9:
return cpufreq_register_driver(&longhaul_driver);
case 10:
printk(KERN_ERR PFX "Use acpi-cpufreq driver for VIA C7\n");
default:
;
}
return -ENODEV;
}
static void __exit longhaul_exit(void)
{
struct cpufreq_policy *policy = cpufreq_cpu_get(0);
int i;
for (i = 0; i < numscales; i++) {
if (mults[i] == maxmult) {
longhaul_setstate(policy, i);
break;
}
}
cpufreq_cpu_put(policy);
cpufreq_unregister_driver(&longhaul_driver);
kfree(longhaul_table);
}
/* Even if BIOS is exporting ACPI C3 state, and it is used
* with success when CPU is idle, this state doesn't
* trigger frequency transition in some cases. */
module_param(disable_acpi_c3, int, 0644);
MODULE_PARM_DESC(disable_acpi_c3, "Don't use ACPI C3 support");
/* Change CPU voltage with frequency. Very useful to save
* power, but most VIA C3 processors aren't supporting it. */
module_param(scale_voltage, int, 0644);
MODULE_PARM_DESC(scale_voltage, "Scale voltage of processor");
/* Force revision key to 0 for processors which doesn't
* support voltage scaling, but are introducing itself as
* such. */
module_param(revid_errata, int, 0644);
MODULE_PARM_DESC(revid_errata, "Ignore CPU Revision ID");
/* By default driver is disabled to prevent incompatible
* system freeze. */
module_param(enable, int, 0644);
MODULE_PARM_DESC(enable, "Enable driver");
MODULE_AUTHOR("Dave Jones <davej@redhat.com>");
MODULE_DESCRIPTION("Longhaul driver for VIA Cyrix processors.");
MODULE_LICENSE("GPL");
late_initcall(longhaul_init);
module_exit(longhaul_exit);
