aboutsummaryrefslogblamecommitdiffstats
path: root/drivers/char/rio/cirrus.h
blob: cf056a990f185b8506027037c2abaaf83aa05579 (plain) (tree)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463














































































































































































































































































































































































































































































                                                                                                                                                  
/****************************************************************************
 *******                                                              *******
 *******		CIRRUS.H				      *******
 *******                                                              *******
 ****************************************************************************

 Author  : Jeremy Rolls
 Date    : 3 Aug 1990

 *
 *  (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
 *
 *      This program is free software; you can redistribute it and/or modify
 *      it under the terms of the GNU General Public License as published by
 *      the Free Software Foundation; either version 2 of the License, or
 *      (at your option) any later version.
 *
 *      This program is distributed in the hope that it will be useful,
 *      but WITHOUT ANY WARRANTY; without even the implied warranty of
 *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *      GNU General Public License for more details.
 *
 *      You should have received a copy of the GNU General Public License
 *      along with this program; if not, write to the Free Software
 *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.

 Version : 0.01


                            Mods
 ----------------------------------------------------------------------------
  Date     By                Description
 ----------------------------------------------------------------------------

 ***************************************************************************/

#ifndef _cirrus_h
#ifndef lint
/* static char* _cirrus_h_sccs = "@(#)cirrus.h	1.16"; */
#endif
#define _cirrus_h 1

#ifdef RTA
#define	TO_UART	RX
#define TO_DRIVER TX
#endif

#ifdef HOST
#define	TO_UART	TX
#define TO_DRIVER RX
#endif
#ifdef RTA
/* Miscellaneous defines for CIRRUS addresses and related logic for
   interrupts etc.
*/
#define	MAP(a)		((short *)(cirrus_base + (a)))
#define outp(a,b)	(*MAP (a) =(b))
#define inp(a)		((*MAP (a)) & 0xff)
#define	CIRRUS_FIRST	(short*)0x7300
#define	CIRRUS_SECOND	(short*)0x7200
#define	CIRRUS_THIRD	(short*)0x7100
#define	CIRRUS_FOURTH	(short*)0x7000
#define	PORTS_ON_CIRRUS	4
#define	CIRRUS_FIFO_SIZE	12
#define	SPACE		0x20
#define	TAB		0x09
#define	LINE_FEED	0x0a
#define	CARRIAGE_RETURN	0x0d
#define	BACKSPACE	0x08
#define	SPACES_IN_TABS	8
#define	SEND_ESCAPE	0x00
#define START_BREAK	0x81
#define	TIMER_TICK	0x82
#define STOP_BREAK	0x83
#define BASE(a) ((a) < 4 ? (short*)CIRRUS_FIRST : ((a) < 8 ? (short *)CIRRUS_SECOND : ((a) < 12 ? (short*)CIRRUS_THIRD : (short *)CIRRUS_FOURTH)))
#define txack1	((short *)0x7104) 
#define rxack1	((short *)0x7102) 
#define mdack1  ((short *)0x7106)
#define txack2  ((short *)0x7006) 
#define rxack2	((short *)0x7004) 
#define mdack2  ((short *)0x7100) 
#define int_latch       ((short *) 0x7800)
#define int_status      ((short *) 0x7c00) 
#define tx1_pending     0x20 
#define rx1_pending     0x10 
#define md1_pending     0x40 
#define tx2_pending     0x02 
#define rx2_pending     0x01 
#define md2_pending     0x40 
#define module1_bits	0x07
#define module1_modern	0x08
#define module2_bits	0x70
#define module2_modern	0x80
#define module_blank	0xf
#define rs232_d25	0x0
#define	rs232_rj45	0x1
#define rs422_d25	0x3
#define parallel	0x5

#define	CLK0	0x00
#define CLK1	0x01
#define CLK2	0x02
#define CLK3	0x03
#define CLK4	0x04

#define CIRRUS_REVC    0x42
#define CIRRUS_REVE    0x44

#define	TURNON	1
#define TURNOFF 0

/* The list of CIRRUS registers. 
   NB. These registers are relative values on 8 bit boundaries whereas
   on the RTA's the CIRRUS registers are on word boundaries. Use pointer
   arithmetic (short *) to obtain the real addresses required */
#define ccr	0x05	/* Channel Command Register     */
#define ier	0x06	/* Interrupt Enable Register    */
#define cor1	0x08	/* Channel Option Register 1    */
#define cor2	0x09	/* Channel Option Register 2    */
#define cor3	0x0a	/* Channel Option Register 3    */
#define cor4	0x1e	/* Channel Option Register 4    */
#define	cor5	0x1f	/* Channel Option Register 5	*/

#define ccsr	0x0b	/* Channel Control Status Register */
#define rdcr	0x0e	/* Receive Data Count Register  */
#define tdcr	0x12	/* Transmit Data Count Register */
#define mcor1	0x15	/* Modem Change Option Register 1 */
#define mcor2	0x16	/* Modem Change Option Regsiter 2 */

#define livr	0x18	/* Local Interrupt Vector Register */
#define schr1	0x1a	/* Special Character Register 1 */
#define schr2	0x1b	/* Special Character Register 2 */
#define schr3	0x1c	/* Special Character Register 3 */
#define schr4	0x1d	/* Special Character Register 4 */

#define rtr	0x20    /* Receive Timer Register */
#define rtpr	0x21	/* Receive Timeout Period Register */
#define lnc	0x24	/* Lnext character */

#define rivr	0x43	/* Receive Interrupt Vector Register    */
#define tivr	0x42	/* Transmit Interrupt Vector Register   */
#define mivr	0x41	/* Modem Interrupt Vector Register      */
#define gfrcr	0x40	/* Global Firmware Revision code Reg    */
#define ricr	0x44	/* Receive Interrupting Channel Reg     */
#define ticr	0x45	/* Transmit Interrupting Channel Reg    */
#define micr	0x46	/* Modem Interrupting Channel Register  */

#define gcr	0x4b	/* Global configuration register*/
#define misr    0x4c    /* Modem interrupt status register */

#define rbusr	0x59
#define tbusr	0x5a
#define mbusr	0x5b

#define eoir	0x60	/* End Of Interrupt Register */
#define rdsr	0x62	/* Receive Data / Status Register */
#define tdr	0x63	/* Transmit Data Register */
#define svrr	0x67	/* Service Request Register */

#define car	0x68	/* Channel Access Register */
#define mir	0x69	/* Modem Interrupt Register */
#define tir	0x6a	/* Transmit Interrupt Register */
#define rir	0x6b	/* Receive Interrupt Register */
#define msvr1	0x6c	/* Modem Signal Value Register 1 */
#define msvr2	0x6d	/* Modem Signal Value Register 2*/
#define psvr	0x6f	/* Printer Signal Value Register*/

#define tbpr	0x72	/* Transmit Baud Rate Period Register */
#define tcor	0x76	/* Transmit Clock Option Register */

#define rbpr	0x78	/* Receive Baud Rate Period Register */
#define rber	0x7a	/* Receive Baud Rate Extension Register */
#define rcor	0x7c	/* Receive Clock Option Register*/
#define ppr	0x7e	/* Prescalar Period Register    */

/* Misc registers used for forcing the 1400 out of its reset woes */
#define airl	0x6d
#define airm	0x6e
#define airh	0x6f
#define btcr	0x66
#define mtcr	0x6c
#define tber	0x74

#endif				/* #ifdef RTA */


/* Bit fields for particular registers */

/* GCR */
#define GCR_SERIAL	0x00	/* Configure as serial channel */
#define GCR_PARALLEL	0x80	/* Configure as parallel channel */

/* RDSR - when status read from FIFO */
#define	RDSR_BREAK		0x08	/* Break received */
#define RDSR_TIMEOUT    	0x80    /* No new data timeout */
#define RDSR_SC1  	  	0x10    /* Special char 1 (tx XON) matched */
#define RDSR_SC2  	  	0x20    /* Special char 2 (tx XOFF) matched */
#define RDSR_SC12_MASK	  	0x30    /* Mask for special chars 1 and 2 */

/* PPR */
#define PPR_DEFAULT	0x31	/* Default value - for a 25Mhz clock gives
				   a timeout period of 1ms */

/* LIVR */
#define	LIVR_EXCEPTION	0x07	/* Receive exception interrupt */

/* CCR */
#define	CCR_RESET	0x80	/* Reset channel */
#define	CCR_CHANGE	0x4e	/* COR's have changed - NB always change all
				   COR's */
#define	CCR_WFLUSH	0x82	/* Flush transmit FIFO and TSR / THR */

#define	CCR_SENDSC1	0x21	/* Send special character one */
#define CCR_SENDSC2	0x22	/* Send special character two */
#define CCR_SENDSC3	0x23	/* Send special character three */
#define CCR_SENDSC4	0x24	/* Send special character four */

#define CCR_TENABLE	0x18	/* Enable transmitter */
#define	CCR_TDISABLE	0x14	/* Disable transmitter */
#define CCR_RENABLE	0x12	/* Enable receiver */
#define CCR_RDISABLE	0x11	/* Disable receiver */

#define	CCR_READY	0x00	/* CCR is ready for another command */

/* CCSR */
#define CCSR_TXENABLE	0x08	/* Transmitter enable */
#define CCSR_RXENABLE	0x80	/* Receiver enable */
#define CCSR_TXFLOWOFF	0x04	/* Transmit flow off */
#define CCSR_TXFLOWON	0x02	/* Transmit flow on */

/* SVRR */
#define	SVRR_RECEIVE	0x01	/* Receive interrupt pending */
#define	SVRR_TRANSMIT	0x02	/* Transmit interrupt pending */
#define	SVRR_MODEM	0x04	/* Modem interrupt pending */

/* CAR */
#define CAR_PORTS	0x03	/* Bit fields for ports */

/* IER */
#define	IER_MODEM	0x80	/* Change in modem status */
#define	IER_RECEIVE	0x10	/* Good data / data exception */
#define IER_TRANSMITR	0x04	/* Transmit ready (FIFO empty) */
#define	IER_TRANSMITE	0x02	/* Transmit empty */
#define IER_TIMEOUT	0x01	/* Timeout on no data */

#define	IER_DEFAULT	0x94	/* Default values */
#define IER_PARALLEL    0x84    /* Default for Parallel */
#define	IER_EMPTY	0x92	/* Transmitter empty rather than ready */

/* COR1 - Driver only */
#define	COR1_INPCK	0x10	/* Check parity of received characters */

/* COR1 - driver and RTA */
#define	COR1_ODD	0x80	/* Odd parity */
#define COR1_EVEN	0x00	/* Even parity */
#define	COR1_NOP	0x00	/* No parity */
#define	COR1_FORCE	0x20	/* Force parity */
#define	COR1_NORMAL	0x40	/* With parity */
#define	COR1_1STOP	0x00	/* 1 stop bit */
#define	COR1_15STOP	0x04	/* 1.5 stop bits */
#define	COR1_2STOP	0x08	/* 2 stop bits */
#define	COR1_5BITS	0x00	/* 5 data bits */
#define	COR1_6BITS	0x01	/* 6 data bits */
#define	COR1_7BITS	0x02	/* 7 data bits */
#define	COR1_8BITS	0x03	/* 8 data bits */

#define COR1_HOST       0xef    /* Safe host bits */

/* RTA only */
#define COR1_CINPCK     0x00    /* Check parity of received characters */
#define COR1_CNINPCK    0x10    /* Don't check parity */

/* COR2 bits for both RTA and driver use */
#define	COR2_IXANY	0x80	/* IXANY - any character is XON */
#define	COR2_IXON	0x40	/* IXON - enable tx soft flowcontrol */
#define	COR2_RTSFLOW	0x02	/* Enable tx hardware flow control */

/* Additional driver bits */
#define	COR2_HUPCL	0x20	/* Hang up on close */
#define	COR2_CTSFLOW	0x04	/* Enable rx hardware flow control */
#define	COR2_IXOFF	0x01	/* Enable rx software flow control */
#define COR2_DTRFLOW	0x08	/* Enable tx hardware flow control */

/* RTA use only */
#define COR2_ETC	0x20	/* Embedded transmit options */
#define	COR2_LOCAL	0x10	/* Local loopback mode */
#define	COR2_REMOTE	0x08	/* Remote loopback mode */
#define	COR2_HOST	0xc2	/* Safe host bits */

/* COR3 - RTA use only */
#define	COR3_SCDRNG	0x80	/* Enable special char detect for range */
#define	COR3_SCD34	0x40	/* Special character detect for SCHR's 3 + 4 */
#define	COR3_FCT	0x20	/* Flow control transparency */
#define	COR3_SCD12	0x10	/* Special character detect for SCHR's 1 + 2 */
#define	COR3_FIFO12	0x0c	/* 12 chars for receive FIFO threshold */
#define COR3_FIFO10     0x0a    /* 10 chars for receive FIFO threshold */
#define COR3_FIFO8      0x08    /* 8 chars for receive FIFO threshold */
#define COR3_FIFO6      0x06    /* 6 chars for receive FIFO threshold */

#define COR3_THRESHOLD  COR3_FIFO8	/* MUST BE LESS THAN MCOR_THRESHOLD */

#define	COR3_DEFAULT	(COR3_FCT | COR3_THRESHOLD)
				/* Default bits for COR3 */

/* COR4 driver and RTA use */
#define	COR4_IGNCR	0x80	/* Throw away CR's on input */
#define	COR4_ICRNL	0x40	/* Map CR -> NL on input */
#define	COR4_INLCR	0x20	/* Map NL -> CR on input */
#define	COR4_IGNBRK	0x10	/* Ignore Break */
#define	COR4_NBRKINT	0x08	/* No interrupt on break (-BRKINT) */
#define COR4_RAISEMOD	0x01	/* Raise modem output lines on non-zero baud */


/* COR4 driver only */
#define COR4_IGNPAR	0x04	/* IGNPAR (ignore characters with errors) */
#define COR4_PARMRK	0x02	/* PARMRK */

#define COR4_HOST	0xf8	/* Safe host bits */

/* COR4 RTA only */
#define COR4_CIGNPAR	0x02	/* Thrown away bad characters */
#define COR4_CPARMRK	0x04	/* PARMRK characters */
#define COR4_CNPARMRK	0x03	/* Don't PARMRK */

/* COR5 driver and RTA use */
#define	COR5_ISTRIP	0x80	/* Strip input chars to 7 bits */
#define	COR5_LNE	0x40	/* Enable LNEXT processing */
#define	COR5_CMOE	0x20	/* Match good and errored characters */
#define	COR5_ONLCR	0x02	/* NL -> CR NL on output */
#define	COR5_OCRNL	0x01	/* CR -> NL on output */

/*
** Spare bits - these are not used in the CIRRUS registers, so we use
** them to set various other features.
*/
/*
** tstop and tbusy indication
*/
#define	COR5_TSTATE_ON	0x08	/* Turn on monitoring of tbusy and tstop */
#define	COR5_TSTATE_OFF	0x04	/* Turn off monitoring of tbusy and tstop */
/*
** TAB3
*/
#define	COR5_TAB3	0x10	/* TAB3 mode */

#define	COR5_HOST	0xc3	/* Safe host bits */

/* CCSR */
#define	CCSR_TXFLOFF	0x04	/* Tx is xoffed */

/* MSVR1 */
/* NB. DTR / CD swapped from Cirrus spec as the pins are also reversed on the
   RTA. This is because otherwise DCD would get lost on the 1 parallel / 3
   serial option.
*/
#define	MSVR1_CD	0x80	/* CD (DSR on Cirrus) */
#define	MSVR1_RTS	0x40	/* RTS (CTS on Cirrus) */
#define	MSVR1_RI	0x20	/* RI */
#define	MSVR1_DTR	0x10	/* DTR (CD on Cirrus) */
#define	MSVR1_CTS	0x01	/* CTS output pin (RTS on Cirrus) */
/* Next two used to indicate state of tbusy and tstop to driver */
#define	MSVR1_TSTOP	0x08	/* Set if port flow controlled */
#define	MSVR1_TEMPTY	0x04	/* Set if port tx buffer empty */

#define	MSVR1_HOST	0xf3	/* The bits the host wants */

/* MSVR2 */
#define	MSVR2_DSR	0x02	/* DSR output pin (DTR on Cirrus) */

/* MCOR */
#define	MCOR_CD	        0x80	/* CD (DSR on Cirrus) */
#define	MCOR_RTS	0x40	/* RTS (CTS on Cirrus) */
#define	MCOR_RI	        0x20	/* RI */
#define	MCOR_DTR	0x10	/* DTR (CD on Cirrus) */

#define MCOR_DEFAULT    (MCOR_CD | MCOR_RTS | MCOR_RI | MCOR_DTR)
#define MCOR_FULLMODEM  MCOR_DEFAULT
#define MCOR_RJ45       (MCOR_CD | MCOR_RTS | MCOR_DTR)
#define MCOR_RESTRICTED (MCOR_CD | MCOR_RTS)

/* More MCOR - H/W Handshake (flowcontrol) stuff */
#define	MCOR_THRESH8	0x08	/* eight characters then we stop */
#define	MCOR_THRESH9	0x09	/* nine characters then we stop */
#define	MCOR_THRESH10	0x0A	/* ten characters then we stop */
#define	MCOR_THRESH11	0x0B	/* eleven characters then we stop */

#define	MCOR_THRESHBITS 0x0F	/* mask for ANDing out the above */

#define	MCOR_THRESHOLD	MCOR_THRESH9 /* MUST BE GREATER THAN COR3_THRESHOLD */


/* RTPR */
#define RTPR_DEFAULT	0x02	/* Default */


/* Defines for the subscripts of a CONFIG packet */
#define	CONFIG_COR1	1	/* Option register 1 */
#define	CONFIG_COR2	2	/* Option register 2 */
#define	CONFIG_COR4	3	/* Option register 4 */
#define	CONFIG_COR5	4	/* Option register 5 */
#define	CONFIG_TXXON	5	/* Tx XON character */
#define	CONFIG_TXXOFF	6	/* Tx XOFF character */
#define	CONFIG_RXXON	7	/* Rx XON character */
#define	CONFIG_RXXOFF	8	/* Rx XOFF character */
#define CONFIG_LNEXT	9	/* LNEXT character */
#define	CONFIG_TXBAUD	10	/* Tx baud rate */
#define	CONFIG_RXBAUD	11	/* Rx baud rate */

/* Port status stuff */
#define	IDLE_CLOSED	0	/* Closed */
#define IDLE_OPEN	1	/* Idle open */
#define IDLE_BREAK	2	/* Idle on break */

/* Subscript of MODEM STATUS packet */
#define	MODEM_VALUE	3	/* Current values of handshake pins */
/* Subscript of SBREAK packet */
#define BREAK_LENGTH	1	/* Length of a break in slices of 0.01 seconds
				   0 = stay on break until an EBREAK command
				   is sent */


#define	PRE_EMPTIVE	0x80	/* Pre-emptive bit in command field */

/* Packet types going from Host to remote - with the exception of OPEN, MOPEN,
   CONFIG, SBREAK and MEMDUMP the remaining bytes of the data array will not
   be used 
*/
#define	OPEN		0x00	/* Open a port */
#define CONFIG		0x01	/* Configure a port */
#define	MOPEN		0x02	/* Modem open (block for DCD) */
#define	CLOSE		0x03	/* Close a port */
#define	WFLUSH		(0x04 | PRE_EMPTIVE) /* Write flush */
#define	RFLUSH		(0x05 | PRE_EMPTIVE) /* Read flush */
#define	RESUME		(0x06 | PRE_EMPTIVE) /* Resume if xoffed */
#define	SBREAK		0x07 	/* Start break */
#define	EBREAK		0x08	/* End break */
#define	SUSPEND		(0x09 | PRE_EMPTIVE) /* Susp op (behave as tho xoffed) */
#define FCLOSE          (0x0a | PRE_EMPTIVE) /* Force close */
#define XPRINT          0x0b    /* Xprint packet */
#define MBIS		(0x0c | PRE_EMPTIVE) /* Set modem lines */
#define MBIC		(0x0d | PRE_EMPTIVE) /* Clear modem lines */
#define MSET		(0x0e | PRE_EMPTIVE) /* Set modem lines */
#define PCLOSE		0x0f	/* Pseudo close - Leaves rx/tx enabled */
#define MGET		(0x10 | PRE_EMPTIVE) /* Force update of modem status */
#define MEMDUMP		(0x11 | PRE_EMPTIVE) /* Send back mem from addr supplied */
#define	READ_REGISTER	(0x12 | PRE_EMPTIVE) /* Read CD1400 register (debug) */

/* "Command" packets going from remote to host COMPLETE and MODEM_STATUS
   use data[4] / data[3] to indicate current state and modem status respectively
*/ 

#define	COMPLETE	(0x20 | PRE_EMPTIVE)
				/* Command complete */
#define BREAK_RECEIVED	(0x21 | PRE_EMPTIVE)
				/* Break received */
#define MODEM_STATUS	(0x22 | PRE_EMPTIVE)
				/* Change in modem status */

/* "Command" packet that could go either way - handshake wake-up */
#define HANDSHAKE	(0x23 | PRE_EMPTIVE)
				/* Wake-up to HOST / RTA */

#endif